Age | Commit message (Collapse) | Author | Files | Lines |
|
Some testbeds occasionally miss one session with the previous value.
+ Increase ramp-up duration proportionally.
Change-Id: I5300127d7e8fbc670c37ae392ab514b077b3c9b1
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Signed-off-by: Maros Mullner <maros.mullner@pantheon.tech>
Change-Id: I83b00d56a50d98c36547621cb2f41cb3b2f35741
|
|
Remaining ipsec reconf test suites for 40 tunnels include:
- int-aes128cbc-hmac512sha
- int-aes256gcm
Change-Id: I9c5f549368595bb0cbd0d7e9918b7695184d31c4
Signed-off-by: Maciek Konstantynowicz <mkonstan@cisco.com>
|
|
Signed-off-by: pmikus <pmikus@cisco.com>
Change-Id: If98f575503a59106fe8b94d5c683881412ea4f1c
|
|
Remove following test suites:
- ipsec tests
- ethip4ipsectptlispgpe.
- policy-aes128gcm.
- policy-aes128cbc-hmac256sha.
- policy-aes128cbc-hmac512sha.
- int-aes128cbc-hmac256sha.
- scale of
- 400tnlsw.
- 5000tnlsw.
- 20000tnlsw.
- 60000tnlsw.
Change-Id: Ib4915213f6c440c70f9b17cbaac834245e51bd85
Signed-off-by: Maciek Konstantynowicz <mkonstan@cisco.com>
|
|
Add 1, 10, 100 and 1000 SPD entries using IPv4 outbound flow cache
optimization.
Change-Id: I7abb65a82454c17ef754cb11386186610f0c27e8
Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
|
|
Change-Id: I75e836ce728fd333764f17d69813093cb947ef4f
Signed-off-by: Viliam Luc <vluc@cisco.com>
|
|
The comms DDP package needs to be installed to support all flow protocols
Signed-off-by: xinfeng zhao <xinfengx.zhao@intel.com>
Change-Id: I6ab1bd8beb9edb8c9889a0ed9a999080ca3cef3d
|
|
Change-Id: I8679c819b7c6ecd9e680bdc6edeafd2124def0b5
Signed-off-by: Viliam Luc <vluc@cisco.com>
|
|
The old one got deduplicated in https://gerrit.fd.io/r/c/csit/+/32687
Change-Id: Ie82ba36a0805154f17e9fcde0efafb93a686c686
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
New IPUtil.Vpp_Route_Add implementation detects wrong values,
as it refuses start addresses with host bits set.
Fixed by copying in_mask values from nearby ASTF suites.
Change-Id: I768c023bd004ce97b74199d70e5768c5e948d429
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Signed-off-by: pmikus <pmikus@cisco.com>
Change-Id: I80efb278cf824dd8b1d38bb3ff3df43366e7295a
|
|
+ this is not checked by suite generator
Signed-off-by: pmikus <pmikus@cisco.com>
Change-Id: Ib21cd50d6cc5e3d808fa34a3bb270277c7f36f88
|
|
Signed-off-by: pmikus <pmikus@cisco.com>
Change-Id: I81958fbf6ef240d53a0fb8708ca882baf02f606c
|
|
Signed-off-by: pmikus <pmikus@cisco.com>
Change-Id: Ie8662b6a485374b5df68dec9c82065cf59f28c8f
|
|
It is no longer expected to fail.
Change-Id: I04e7f5ed3940ed93c253b5c31e2295a611858925
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Add testcases with plain ipv4 forwarding with 1, 10, 100 and 1000 SPD
entries on outbound traffic in both directions both directions. Only
match the last SPD entry and process others before the matching entry.
Add testcases only without flow cache optimization.
Refactor the Python functions that add SPD entries:
- Unify the args in functions that add one and multiple entries.
- For multiple entries, add the ability to pass an object that will
handle how values in each iteration (i.e. for each entry) are modified.
Change-Id: I061922eec6acc75a4e115202c07e72d89bf1f4d3
Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
|
|
Signed-off-by: pmikus <pmikus@cisco.com>
Change-Id: I770bb2114d92bda4ab2408be9b075263c1cd2223
|
|
The list of actions stat_pre_trial is executed
after the list stat_runtime, which already contains vpp-runtime.
Change-Id: If9b403f38b2f811d77f36d9cae973130f30015da
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Signed-off-by: pmikus <pmikus@cisco.com>
Change-Id: I6826add7b3032041632c3952c45a3c64409400b0
|
|
+ Set overhead in those suites to numeric values.
+ Change the library to tolerate string representations anyway.
Change-Id: Ic6215840f7797801c994a38db5637999eb85a034
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Signed-off-by: pmikus <pmikus@cisco.com>
Change-Id: I909942dbb920df7f0fe15c0c92cda92c3cd8d8ad
|
|
Signed-off-by: pmikus <pmikus@cisco.com>
Change-Id: If24c385b93e1ba310ea258984c97494b4cab467c
|
|
Signed-off-by: xinfeng zhao <xinfengx.zhao@intel.com>
Reviewed-by: Yulong Pei <yulong.pei@intel.com>
Change-Id: Ibe4420529192559a3cdbb84e0a67859750a9e0d5
|
|
Signed-off-by: pmikus <pmikus@cisco.com>
Change-Id: I2f019a083916aec9f7816266f6ad5b92dcc31fa0
|
|
Change-Id: I0c973ceffc13f4f3c5f959d56cb0890b87091a82
Signed-off-by: Viliam Luc <viliam.luc@pantheon.tech>
|
|
Signed-off-by: pmikus <pmikus@cisco.com>
Change-Id: I710af90aa5474381a82095c8a11ecf6c01c2483b
|
|
Change-Id: Ie2e735971934d8aeac2d436505c120f09ce67ac7
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
1. Suite steup add download nginx
2. Add nginx-1.14.2/1.15.0 ldp test suite
3. Add NginxUtils,NginxConfigGenerator method
4. Taskset the PID of nginx to the unused cores in VPP and these cores are under NIC's NUMA ID
5. cleanup add Kill Processes - nohup
Signed-off-by: xizhanx <xix.zhang@intel.com>
Change-Id: Idbf0e4ec3bf63e88281a8e3e34f52e00a6801c85
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Add more granularity test policy tests. Mirror the number of tunnels in
other IPsec tests under 1000 tunnels.
Change-Id: I9bde7447a5d809bab05db132bf6cb524e97e19b3
Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
|
|
Add 2n1l udir 1 and 1000 tunnel sw policy IPsec tests to mirror the
existing 3n tests.
Add static ip neighbor mac entries which can't be retrieved in 2node
setups.
Change-Id: I13dd557cbeed7f907fa9b4c21e4e245d48916513
Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
|
|
+ Extract the stats keyword into a library.
Change-Id: Icfaaa32c2a97d479ba0339acf34b865006949a89
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Suite name part is correct: swasync.
This fixes the tag, from IPSECHW to IPSECSW.
Change-Id: I13a5201dade7edf180d315416c82c15d69c1bfce
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Add unidirectional 2n crypto tests. Only one direction can be tested on
a 2 node topology, since we can't use the same interface for both
encrypted and unencrypted traffic. Add the following tests:
* {n}tnlsw-ip4base-int ndrpdr tests
* {n}tnlsw-1atnl-ip4base-int reconf tests
* {n}tnlswasync-scheduler-ip4base-int ndrpdr tests
Where n is the number of tunnels:
1, 4, 40, 400, 1000, 5000, 10000, 20000, 40000, 60000 for the first two
1, 2, 4, 8 for the async scheduler tests
All of these with the following ecryption-auth algorithms:
aes128gcm
aes256gcm
aes128cbc-hmac256sha
aes128cbc-hmac512sha
Also add the corresponding trex profiles:
trex-stl-2n-ethip4-ip4dst{n}-udir.py
Where n is the number of tunnels listed above. The profiles are shared
among the tests.
Change-Id: I22bb46e6ad59801581a78aa19310bee8a5293e56
Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
|
|
Some tests use a crypto algorithm with no integrity algorithm.
Generate empty binary strings as fake integrity keys
to keep return values of low level methods consistent.
+ Add return_keys argument to avoid returning long lists.
+ Improve various docstrings.
Change-Id: Idae1877bdde32d194ce4e3bb3053c8dba39d377a
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
This patch is to add test suites for vpp plugin crypto_sw_scheduler,
IPsec sync mode is to do crypto and packet forward work in same worker cores,
crypto_sw_scheduler can schedule crypto work to other async crypto cores to
improve whole crypto processing capability.
This test suites configure fixed 1 rx queues per port, then measure IPsec
performance with 1, 2, 3 crypto cores.
This patchset include 1, 2, 4, 8 ipsec tunnels test cases.
+Vratko help to change to count total physical cores instead of previous only
count crypto cores in test cases.
Change-Id: I0e67182e3d13273890a23703d838101900e25126
Signed-off-by: Yulong Pei <yulong.pei@intel.com>
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
Signed-off-by: pmikus <pmikus@cisco.com>
|
|
Signed-off-by: pmikus <pmikus@cisco.com>
Change-Id: Idcee623abbc5568fc6ca49113bc2ff8add179046
|
|
Signed-off-by: pmikus <pmikus@cisco.com>
Change-Id: I35b2f786105103f19907d74c4f6cc77d7cd3a5bb
|
|
Signed-off-by: pmikus <pmikus@cisco.com>
Change-Id: I874568aebbe50c38e634438eb1201ca737bd18ad
|
|
+ With ramp-up, without reset, with session verification.
+ Uses the same profile as pps tests.
+ Ramp up duration is not specified, as duration is computed.
+ Timeout tracking with automated ramp-up.
+ Correct computation of next duration.
+ Checking both early and late sessions.
+ No loss measurement also acts as a ramp-up.
+ Return ReceiveRateMeasurement from send_traffic_on_tg_internal,
as that is needed for detecting whether trial is ok as ramp up.
- Udp needs quite low ramp-up rate after recent regression.
- Max scale has higher rate (so failing) to avoid session timeouts.
+ Bump copyright year.
Change-Id: I50c928659cd5b985b490a2e5fb69c5cd790600b0
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
- To be debugged
Signed-off-by: pmikus <pmikus@cisco.com>
Change-Id: I62ea2427d716f10dbf6af179edfaa41e73952db0
|
|
Results if NDR search is in TPS (so unidir) since
https://gerrit.fd.io/r/c/csit/+/28208
The bug was causing all reconf tests report zero loss,
as they used half of NDR load during reconfiguration.
+ Small improvements to descriptions of other traffic keywords.
Change-Id: Ib9af5861cc09e698eb762feb3f0a019571d17962
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Signed-off-by: Martin Balaz <martin.balaz@pantheon.tech>
Change-Id: I70127d8dd2241b70511f31842eb8a9e3cbafdc4b
Signed-off-by: Jan Gelety <jgelety@cisco.com>
|
|
+ Replace pair of traffic profiles (2n and 3n) with single nodeless one.
+ Compared to incremental suites, randomized ones add IP6_RND tag.
Change-Id: I2f0dfc9e04bbcd0f88e95b92edf2da2c73faaab6
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Jira: CSIT-1768
Change-Id: I888ae1a5754fa07297d4cdf65c2be0e3e49d89a5
Signed-off-by: Jan Gelety <jgelety@cisco.com>
|
|
+ Rename traffic profiles to avoid mentioning number of nodes.
+ Improve 2n rnd suite documentation slightly.
Change-Id: I82d6fb6a99133163a58d56f2acf8a7b9568ee77c
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Modify initialize L2BD ACL keywords to be usable for both 2-node and
3-node topologies and update testsuites accordingly.
Add the missing macip T-rex profile.
Add classifier tests to 2n-tx2 job specs.
Change-Id: I17b84b8fc18ef9a6f275ae0238a0665ac2017f01
Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
|
|
Signed-off-by: Tomas Alexy <tomas.alexy@pantheon.tech>
Change-Id: Ifb97088a26f3c2ab2ecee28ed43e6e957a844c64
|
|
Signed-off-by: pmikus <pmikus@cisco.com>
Change-Id: Ibafaaca4438587284d1e255c764f0701002941e8
|
|
Disconnect+connect cycle is expensive and slow.
This change tracks connected client instances
so later "connect" to the same target uses it.
Explicit disconnects are allowed (and executed before VPP ends),
but once again disconnected instances are cached and reused,
as creating a new instance is more expensive than just connect.
+ Add missing checks on interfaces being up to appropriate keyword.
+ Use appropriate keywords.
+ Add a comment explaining why a simpler keyword is not appropriate.
+ Improve VPP checks in containers.
+ Fix the vppctl check to actually work.
+ Add PAPI check to ensure VPP is really ready.
+ Delay/reorder checks to make them faster with multiple containers.
+ Leave some TODOs to improve various lifecycles later.
+ As we do not stop VPP in test/suite teardown:
+ One final disconnect is needed, added to __init__.robot teardowns.
- Import of the final disconnect keyword is ugly, but it works.
- We could use a hashable class for distinguishing node+socket pairs.
- Are we connecting to VPP inside VMs?
Change-Id: I49cd726740c3e8cae1591c7c84b85a447241228f
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|