Age | Commit message (Collapse) | Author | Files | Lines |
|
- No support for IMIX.
+ Fix a bad bug in padding (most ASTF profiles had wrong frame sizes).
+ Fix a big typo in TCP PPS profiles (s->c was not data, just RST).
+ Control transaction size via ASTF_N_DATA_FRAMES env variable.
- Default value 5 leads to transactions smaller than before.
+ It ensures transaction is one burst (per direction) even for jumbo.
+ Edit autogen to set supported frame sizes based on suite id.
+ Both TCP and UDP use the same values:
+ 64B for CPS (exact for UDP, nominal for TCP).
+ 100B, 1518B and 9000B for TPUT and PPS.
- TCP TPUT achievable minimum is 70B.
+ Used 100B to leave room for possible IPv6 ASTF tests.
+ Separate function for code reused by vpp and trex tests.
- I do not really like the new "copy and edit" approach added here.
+ But it is a quick edit, better autogen refactor is low priority.
+ Consider both established and transitory sessions as valid.
- Mostly for compatibility with 2202 behavior and to avoid ramp-ups.
- Assuming both session states have similar enough VPP CPU overhead.
+ Added a TODO to investigate and maybe reconsider later.
+ Update the state timeout value to 240s.
+ That is the default for TCP (for transitory state).
- UDP could keep using 300s.
+ But I prefer UDP and TCP to behave as similarly as possible.
+ Use TRex tunables to get the exact frame size (for data packets).
- It is not clear why the recipe for MSS has to be this complicated.
+ Move code away from profile init, as frame size is not known there.
+ Change internal profile API, so values related to MSS are passed.
+ Lower ramp-up rate for TCP TPUT tests.
+ Because without lower rate, jumbo fails on packet loss in ramp-up.
+ UDP TPUT ramp-up rate also lowered (just to keep suites more similar).
+ Distinguish one-direction and aggregated average frame size.
+ Update keyword documentation where the distiction matters.
+ One-direction is needed for turning bandwidth limit to TPS limit.
+ Aggregated is needed for correct NDRPDR bandwidth result value.
- TCP TPUT will always be few percent below bidirectional maximum.
+ That is unavoidable, as one direction sends more control packets.
+ Add runtime consistency checks so future refactors are safer.
+ Fail if padding requested would be negative.
+ Fail if suite claims unexpected values for packets per transaction.
+ Edit the 4 types of ASTF profiles to keep them similar to each other.
+ Move UDP TPUT limit value from a field back to direct argument.
+ Stop pretending first UDP packet is not data.
+ Apply small improvements where convenient.
+ Replace "aggregate" with "aggregated" where possible.
+ To lower probability of any future typos in variable names.
+ Avoid calling Set Numeric Frame Sizes twice.
+ Code formatting, keyword documentation, code comments, ...
+ Add TODOs for less important code quality improvements.
- Postpone updating of methodology pages to a subsequent change.
Change-Id: I4b381e5210e69669f972326202fdcc5a2c9c923b
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Signed-off-by: Peter Mikus <pmikus@cisco.com>
Change-Id: I2829b5931e5a63a33f524e1d14ffb20c27f4ce5a
|
|
Previous edit was restoring the correct formatting for bold text
in suite documentation by a mass replace of single asterisk
to double asterisk.
But in geneve suites, one usage of single asterisk
was numeric multiplication, which was errorneously replaces
with double asterisk (power operation).
This restores the multiplication.
Fixes: e82ebbd96e2ba73276e2f1b6d7f9c2d8a9442c3f
Change-Id: I537ebe59dd8c04768a90a5b61a348c57e3dfd149
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Signed-off-by: Peter Mikus <pmikus@cisco.com>
Change-Id: I12d2d58de01693b18628cd73b5d8c36467506f32
|
|
The previous values were too high for 9000b bandwidth.
In order to avoid any packet loss,
the new values are low enough even for x710 (10 Gbps).
The ramp-up rate is also considerably lowered
for lower scales, to keep the rate constant.
Ramp-up duration slightly increased above the minimum needed
to avoid time overheads, duration stretching and rounding errors.
Ticket: CSIT-1811
Change-Id: Iefa8d4d9344e3876014dc5415a4acfedc5abf429
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Change-Id: I901ef0afce782bf69b7169e0dd08ce06b6f074b0
Signed-off-by: Tibor Frank <tifrank@cisco.com>
|
|
Replace the hardcoded SPD inbound/outbound ranges with values derived
from test inputs.
Add the necessary routes now that the tunnel endpoints are not in the
same subnet. Also add ip neighbor entry on DUT2 for the same reason.
Also replace ipsec sa dump with show ipsec all in teardown of tests
where both SAs and SPDs are configured to improve troubleshooting.
Change-Id: I7d89a99fcf457a701c87bf6ac07364b62802677d
Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
|
|
Signed-off-by: xinfeng zhao <xinfengx.zhao@intel.com>
Change-Id: I1590d438216e4c886aae03f83364837153623dbc
|
|
+ Model version 1.0.0.
- Only some result types are exported.
+ MRR, NDRPDR and SOAK.
- Other result types to be added later.
+ In contrast, all test types are detected.
+ Convert custom classes to JSON-serializable equivalents.
+ Sort dict keys before converting to JSON.
+ Override the order for some known keys.
+ Export sets as sorted arrays.
+ Convert to info content from serialized raw content.
+ Also export outputs for suite setups and teardowns.
+ Info files for setup/teardown exist only temporarily.
+ The data is merged into suite.info.json file.
+ This simplifies presentation of total suite duration.
+ Define model via JSON schema:
- Just test case, suite setup/teardown/suite to be added later.
- Just info, raw to be added later.
+ Proper descriptions.
+ Json is generated from yaml.
+ This is a convenience for maintainers.
+ The officially used schema is the .json one.
+ TODOs written into a separate .txt file.
+ Validate exported instance against the schema.
+ Include format checking.
+ Update CSIT requirements for validation dependencies.
+ This needs python-dateutil==2.8.2, only a patch bump.
+ Compute bandwidth also for soak tests.
+ This unifies with NDRPDR to simplify schema definition.
- PAL may need an update for parsing soak test message.
+ Include SSH log items, raw output only.
+ Generate all outputs in a single filesystem tree.
+ Move raw outputs into test_output_raw.tar.xz.
+ Rename existing tar with suites to generated_robot_files.tar.xz.
Change-Id: I69ff7b330ed1a14dc435fd0ef008e753c0d7f78c
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Signed-off-by: Viliam Luc <vluc@cisco.com>
Change-Id: Ib0a853f7bd8cdbb0dee747e4f601bc4e54d006e9
|
|
When building documentation using sphinx we see ~1200 similar warnings [0]
[0] - https://s3-logs.fd.io/vex-yul-rot-jenkins-1/csit-verify-tox-master-ubuntu2004-x86_64/3289/doc_verify.log.gz
These warning are harmless and can be fixed later
Signed-off-by: Viliam Luc <vluc@cisco.com>
Change-Id: I1ac1099d38935971d47491dde905715345d3935c
|
|
If ./{filename} does not execute, {filename} should not be flagged as executable.
No .robot file is executable.
Change-Id: I7add9d223ad0e587bc041a4cca6bac222a89e078
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Some testbeds occasionally miss one session with the previous value.
+ Increase ramp-up duration proportionally.
Change-Id: I5300127d7e8fbc670c37ae392ab514b077b3c9b1
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Signed-off-by: Maros Mullner <maros.mullner@pantheon.tech>
Change-Id: I83b00d56a50d98c36547621cb2f41cb3b2f35741
|
|
Remaining ipsec reconf test suites for 40 tunnels include:
- int-aes128cbc-hmac512sha
- int-aes256gcm
Change-Id: I9c5f549368595bb0cbd0d7e9918b7695184d31c4
Signed-off-by: Maciek Konstantynowicz <mkonstan@cisco.com>
|
|
Signed-off-by: pmikus <pmikus@cisco.com>
Change-Id: If98f575503a59106fe8b94d5c683881412ea4f1c
|
|
Remove following test suites:
- ipsec tests
- ethip4ipsectptlispgpe.
- policy-aes128gcm.
- policy-aes128cbc-hmac256sha.
- policy-aes128cbc-hmac512sha.
- int-aes128cbc-hmac256sha.
- scale of
- 400tnlsw.
- 5000tnlsw.
- 20000tnlsw.
- 60000tnlsw.
Change-Id: Ib4915213f6c440c70f9b17cbaac834245e51bd85
Signed-off-by: Maciek Konstantynowicz <mkonstan@cisco.com>
|
|
Add 1, 10, 100 and 1000 SPD entries using IPv4 outbound flow cache
optimization.
Change-Id: I7abb65a82454c17ef754cb11386186610f0c27e8
Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
|
|
Change-Id: I75e836ce728fd333764f17d69813093cb947ef4f
Signed-off-by: Viliam Luc <vluc@cisco.com>
|
|
The comms DDP package needs to be installed to support all flow protocols
Signed-off-by: xinfeng zhao <xinfengx.zhao@intel.com>
Change-Id: I6ab1bd8beb9edb8c9889a0ed9a999080ca3cef3d
|
|
Change-Id: I96a031aaf246c2f79c9d90c04038a51915ded4ea
Signed-off-by: Viliam Luc <vluc@cisco.com>
|
|
Change-Id: I8679c819b7c6ecd9e680bdc6edeafd2124def0b5
Signed-off-by: Viliam Luc <vluc@cisco.com>
|
|
The old one got deduplicated in https://gerrit.fd.io/r/c/csit/+/32687
Change-Id: Ie82ba36a0805154f17e9fcde0efafb93a686c686
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Change-Id: I2193cc971a827d73965695c251fb00496fe3d2c7
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Change-Id: Iee3c8ce2079e58da400e52dc4cf6633f90a71f57
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
New IPUtil.Vpp_Route_Add implementation detects wrong values,
as it refuses start addresses with host bits set.
Fixed by copying in_mask values from nearby ASTF suites.
Change-Id: I768c023bd004ce97b74199d70e5768c5e948d429
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Change-Id: I911e121475221fbf5449ed49dc6236caf13742b0
Signed-off-by: Viliam Luc <vluc@cisco.com>
|
|
Change-Id: I9d028294deb1e31b6d185deb1c7523e0226a0ada
Signed-off-by: Viliam Luc <vluc@cisco.com>
|
|
Signed-off-by: pmikus <pmikus@cisco.com>
Change-Id: I80efb278cf824dd8b1d38bb3ff3df43366e7295a
|
|
+ this is not checked by suite generator
Signed-off-by: pmikus <pmikus@cisco.com>
Change-Id: Ib21cd50d6cc5e3d808fa34a3bb270277c7f36f88
|
|
Signed-off-by: pmikus <pmikus@cisco.com>
Change-Id: I81958fbf6ef240d53a0fb8708ca882baf02f606c
|
|
Signed-off-by: pmikus <pmikus@cisco.com>
Change-Id: Ie8662b6a485374b5df68dec9c82065cf59f28c8f
|
|
It is no longer expected to fail.
Change-Id: I04e7f5ed3940ed93c253b5c31e2295a611858925
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Add testcases with plain ipv4 forwarding with 1, 10, 100 and 1000 SPD
entries on outbound traffic in both directions both directions. Only
match the last SPD entry and process others before the matching entry.
Add testcases only without flow cache optimization.
Refactor the Python functions that add SPD entries:
- Unify the args in functions that add one and multiple entries.
- For multiple entries, add the ability to pass an object that will
handle how values in each iteration (i.e. for each entry) are modified.
Change-Id: I061922eec6acc75a4e115202c07e72d89bf1f4d3
Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
|
|
Signed-off-by: pmikus <pmikus@cisco.com>
Change-Id: I770bb2114d92bda4ab2408be9b075263c1cd2223
|
|
The list of actions stat_pre_trial is executed
after the list stat_runtime, which already contains vpp-runtime.
Change-Id: If9b403f38b2f811d77f36d9cae973130f30015da
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Signed-off-by: pmikus <pmikus@cisco.com>
Change-Id: I6826add7b3032041632c3952c45a3c64409400b0
|
|
+ Set overhead in those suites to numeric values.
+ Change the library to tolerate string representations anyway.
Change-Id: Ic6215840f7797801c994a38db5637999eb85a034
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Signed-off-by: pmikus <pmikus@cisco.com>
Change-Id: I909942dbb920df7f0fe15c0c92cda92c3cd8d8ad
|
|
Signed-off-by: pmikus <pmikus@cisco.com>
Change-Id: If24c385b93e1ba310ea258984c97494b4cab467c
|
|
Signed-off-by: xinfeng zhao <xinfengx.zhao@intel.com>
Reviewed-by: Yulong Pei <yulong.pei@intel.com>
Change-Id: Ibe4420529192559a3cdbb84e0a67859750a9e0d5
|
|
Signed-off-by: pmikus <pmikus@cisco.com>
Change-Id: I2f019a083916aec9f7816266f6ad5b92dcc31fa0
|
|
Change-Id: I0c973ceffc13f4f3c5f959d56cb0890b87091a82
Signed-off-by: Viliam Luc <viliam.luc@pantheon.tech>
|
|
Signed-off-by: pmikus <pmikus@cisco.com>
Change-Id: I710af90aa5474381a82095c8a11ecf6c01c2483b
|
|
Change-Id: Ie2e735971934d8aeac2d436505c120f09ce67ac7
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
1. Suite steup add download nginx
2. Add nginx-1.14.2/1.15.0 ldp test suite
3. Add NginxUtils,NginxConfigGenerator method
4. Taskset the PID of nginx to the unused cores in VPP and these cores are under NIC's NUMA ID
5. cleanup add Kill Processes - nohup
Signed-off-by: xizhanx <xix.zhang@intel.com>
Change-Id: Idbf0e4ec3bf63e88281a8e3e34f52e00a6801c85
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
Add more granularity test policy tests. Mirror the number of tunnels in
other IPsec tests under 1000 tunnels.
Change-Id: I9bde7447a5d809bab05db132bf6cb524e97e19b3
Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
|
|
Add 2n1l udir 1 and 1000 tunnel sw policy IPsec tests to mirror the
existing 3n tests.
Add static ip neighbor mac entries which can't be retrieved in 2node
setups.
Change-Id: I13dd557cbeed7f907fa9b4c21e4e245d48916513
Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
|
|
+ Extract the stats keyword into a library.
Change-Id: Icfaaa32c2a97d479ba0339acf34b865006949a89
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Suite name part is correct: swasync.
This fixes the tag, from IPSECHW to IPSECSW.
Change-Id: I13a5201dade7edf180d315416c82c15d69c1bfce
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|