Age | Commit message (Collapse) | Author | Files | Lines |
|
Move DRV_VFIO_PCI after TXQ_SIZE_0.
Upcoming suites need more space in the preceding line.
131 suite files edited, luckily doable by two commands:
$ sed -i 's/ | DRV_VFIO_PCI//' *.robot
$ sed -i 's/ | TXQ_SIZE_0/ | TXQ_SIZE_0 | DRV_VFIO_PCI/' *.robot
Change-Id: Idf30d20d321922718d523a216056d22ae67e50aa
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
(cherry picked from commit 26b060d6da1bf6abd46089be73c5ab70ec4aff05)
(cherry picked from commit 5db639e6a0f9112f97dcb52d7a6b1eb8cd540326)
|
|
Signed-off-by: pmikus <peter.mikus@protonmail.ch>
Change-Id: I601a54e543114957592548618df2f2f4bf790f82
|
|
Some tests were already doing that via Set Test Variable,
this moves the flag into Variables table for every suite.
Change-Id: I54e86f3fd10354dc87c2f04c70bbab771f89f3d2
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Some perf suites use a single unidirectional flow of traffic.
On SMT-enabled machines, 1C tests create 2 workers by default.
But if there is only one stream/flow,
only one worker does useful work.
The other worker on the sibling logical core
does busy-wait, which provably lowers the peformance.
Some suites already set smt_used (as a suite variable)
to False for these purposes.
This change edits a lower-level L1 keyword to honor this value,
and adds the suite variable to single stream (and client) hoststack
suites, where the detrimental effect of busy siblings was observed.
Change-Id: I203f1a700d8e6cd84640b9c0b40487cb832908aa
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
+ State frame size as 1518 octets, even if some packets are smaller.
+ This implicitly makes CSIT keywords to apply n-milti-seg.
- Real frame size is currently not important.
Change-Id: I754eac7e7ebf0378efb27149862004e35c387505
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Only related to enums appearing in ipsec suites.
+ Add conversion utility as enum_utils.py file.
+ Rename PolicyAction closer to ipsec_types.api: IpsecSpdAction.
+ Device and perf suites updated to use str in Variables table.
- Perf suites are being tested.
Change-Id: I3b1678c4d6cc303c590e5e3665ab1b05d104a121
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Signed-off-by: Peter Mikus <peter.mikus@protonmail.ch>
Change-Id: I17866709e1c7edf078055aef4db15774e136b111
|
|
They are broken for more than two years
and they relied on CLIs that changed in VPP anyway.
Ticket: CSIT-1856
Change-Id: I0f278ff61a9da5e6040e08bf3e92049cb33c8a93
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Signed-off-by: Peter Mikus <peter.mikus@protonmail.ch>
Change-Id: Ib9d1d819e59be768377f3a61578c22699a10f0a8
|
|
+ Fix typo "enale".
- Many style and complexity issues remain:
C0302, R0904, R0914, R0913, R1735, R0915, R1734.
Change-Id: I7e8c7ecefd8f8f94dcbc28427baa52a9c8ea1227
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Change-Id: Idef14bef816a04ca43ab9aced4b1441ef818e066
Signed-off-by: xinfengx <xinfengx.zhao@intel.com>
|
|
We are testing /128 in ip6 scale tests for a long time,
but we did not update the suite documentation when we switched.
This does that.
Note that ip6 bas (and feature) tests are still using /64.
Change-Id: I5e108497b3f516195fce0e480ca3ec18d204bd84
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Signed-off-by: Peter Mikus <peter.mikus@protonmail.ch>
Change-Id: I9bc9f9fe410c0fa78e20a234487e63eb42f3fe3f
|
|
This reverts commit b3c5215bba37bd6555231da8c40ae90d9fc570c9.
Reason for revert: Makes no sense
Change-Id: Iabe098114a0e98a89e815daf706745917d8504a6
Signed-off-by: Peter Mikus <peter.mikus@protonmail.ch>
|
|
It is already available via default.robot import.
Change-Id: I52c8f5d62f641edfbbc4b750e40274a75b169a22
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Change-Id: If5cc42bac1c49d1f1d960e0812ab352564bc29d2
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Signed-off-by: Peter Mikus <peter.mikus@protonmail.ch>
Change-Id: I720b7c96a6ac9f328aff57437e51254364604911
|
|
The new suites were added in [1]
and the VPP functionality was removed in [2].
[1] https://gerrit.fd.io/r/c/csit/+/28508
[2] https://gerrit.fd.io/r/c/vpp/+/31443
Change-Id: Id3fa984bf9f61a1dd831d637695ac6844c86ffc8
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Signed-off-by: Peter Mikus <peter.mikus@protonmail.ch>
Change-Id: I84d9cf2892423e62b116b07982d3e87120b66271
|
|
Change-Id: I8c27b5956c0c26bb2de48321675e285ed961412f
Signed-off-by: xinfengx <xinfengx.zhao@intel.com>
|
|
Signed-off-by: Peter Mikus <peter.mikus@protonmail.ch>
Change-Id: I69ee305b25b9e05d2305cb82aba71ef6418780ab
|
|
Signed-off-by: pmikus <peter.mikus@protonmail.ch>
Change-Id: Ib93dc1552945fe91ab5346b9b759d56c7468debf
|
|
Signed-off-by: pmikus <peter.mikus@protonmail.ch>
Change-Id: I8d168979ab9722e0056e97edb228f29cbfa245e3
|
|
Also add IPsec 10000tnlhwasync int mode and 4tnlhwasync policy mode
test suites, in order to compare sw crypto and QAT crypto and IPsec
int mode and policy mode performance.
Signed-off-by: Yulong Pei <yulong.pei@intel.com>
Signed-off-by: xinfeng zhao <xinfengx.zhao@intel.com>
Change-Id: I0aed06a0c75c1a545720649d3561a0aa5a861db2
|
|
Previously, the Set up LDP or VCL Nginx on DUT node keyword
was wrongly documenting its "dut" argument as type string,
while using the value as a node dict instead.
As most of the code already used direct dut1 variables,
this patch eliminates the dut argument altogether
and puts DUT1 into the keyword name.
Change-Id: Ie29afc175b98c1b1cb554438da9178738662d108
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
The supported VPP code is 380c62d7040bf285d449f1d05692141c40089470
which is the latest commit before stable/2306 diverged from master.
+ Separate messages into blocks with paths to .api sources.
+ Prepare memif for use_dma (currently always false).
+ Use srv6 test teardown action in srv6 device tests.
- Do not use sr_policy_add_v2 from 37258 yet.
- Leave a TODO to do it eventually, for now inputs are too different.
- Do not use index based policer calls from 37873.
- The policer_add_del is not deprecated yet and inputs are different.
Change-Id: I350138f09542ec12ce4bec140203175940ccf9d4
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Add ipsec reassembly test cases to bring in line with 3n-icx.
Add ipsec policy test cases with flow cache enabled for both inbound and
outbound traffic.
Remove GTPU hardware tests as the NIC doesn't support GTPU offload RX.
Change-Id: I7b18914f983d5974b390f995ec638a64b9bbccbb
Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
|
|
Change-Id: If7e00460fee4eee50479dc089c026670dcf3edf9
Signed-off-by: Tibor Frank <tifrank@cisco.com>
|
|
Change-Id: I6ec27d787b59d4bc13b8c04f4217302cc3021581
Signed-off-by: pmikus <peter.mikus@protonmail.ch>
|
|
Signed-off-by: pmikus <peter.mikus@protonmail.ch>
Change-Id: I676696928fd1758c9dddf4f2580b9e924fe71b53
|
|
Signed-off-by: pmikus <peter.mikus@protonmail.ch>
Change-Id: Ia13e920ef11d364893a51957778e60084f4ac0f9
|
|
Signed-off-by: pmikus <peter.mikus@protonmail.ch>
Change-Id: I5cd45dd59f13e1ca942f44341b5f37e257c2b51e
|
|
In tunneling scenarios, VPP needs to reassembly packet fragments
before decapsulation. Conveniently, VPP also fragments the packets
after encapsulation (at least for some encapsulation protocols)
if they do not fit into MTU.
So this change adds few suites, adapted from existing 3-node ones
which additionally lower MTU on DUT1-DUT2 link.
The intended packet size is 1518B. 64B packets will fit,
and most of IMIX packets will also fit without fragmentation.
VPP refuses to reassembly 9000B packets as they have too many fragments.
+ Add a keyword so suites need only one additional line of code.
+ Add new test tag REASSEMBLY for the added suites.
+ Tell autogen the one soak test case for reaseembly should be 1518B.
- It is possible to increase fragment limit for 9000B, not done yet.
- Ipsec policy suites are added but they should not be used.
- VPP does fragmentation twice (before and after encapsulation).
- VPP does not perform reassembly (only last fragment is decrypted).
- TRex does not realize the packet from VPP is only a fragment.
- The result is false pass with unfairly good performance.
+ Suites still included, to simplify verifying VPP fixes for the above.
Change-Id: If33c60d767fea161d9e4ffabb8ded3d81c8f39ed
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
Signed-off-by: pmikus <peter.mikus@protonmail.ch>
Change-Id: Icb7b6124dcba7bb57c18ceb91120284f6fe02c2e
|
|
Signed-off-by: xinfeng zhao <xinfengx.zhao@intel.com>
Signed-off-by: Yulong Pei <yulong.pei@intel.com>
Change-Id: I3708253adf4c7421ff48eee6aefb735b39726359
|
|
This will greatly improve the performance of IPsec policy cases
Signed-off-by: xinfeng zhao <xinfengx.zhao@intel.com>
Signed-off-by: Yulong Pei <yulong.pei@intel.com>
Change-Id: Ib42b5650791be7fcc8649873eaf12616aeba5aec
|
|
Previously, only vhost suites got the plugin.
Fixes: 5e663cf4cfa7c3ce187dc4f223fa94dfb41f484b
Change-Id: I020410581583c6226936aa9480913c751b5e8852
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
VPP routing with one million fib rules also is a key indicator for
performance benchmark
Signed-off-by: xinfeng zhao <xinfengx.zhao@intel.com>
Signed-off-by: Yulong Pei <yulong.pei@intel.com>
Change-Id: I19b52f6b96bdc5ed1e76305d258825fb17bd3af9
|
|
- convert hoststack tests to use app-api-socket instead
of vpp-api-socket
Change-Id: Ibcd87f3624e33168ed3afcb30267262efc927e7c
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
* remove evt_qs_memfd_seg and evt_qs_seg_size as they are obsolete
* use app socket api instead of vpp's api
* apply rx and tx descriptors constraints
* increase event queue size for nginx tests
Signed-off-by: Filip Tehlar <ftehlar@cisco.com>
Change-Id: Ie7ac12b8f587e0b1962884127e8eb68a4e588aee
Signed-off-by: Dave Wallace <dwallacelf@gmail.com>
|
|
In order to compare performance number with existed routing based ipip
interface mode 40k tunnels ipsec test.
Signed-off-by: xinfeng zhao <xinfengx.zhao@intel.com>
Signed-off-by: Yulong Pei <yulong.pei@intel.com>
Change-Id: I94816a8c18f08b539114d6ca9d4e1218a2b6ea5f
|
|
Signed-off-by: Viliam Luc <vluc@cisco.com>
Change-Id: I9ff7abda9961d92c98ab08c77e79406644c115fc
|
|
- Due to divergence from original design path the RAW was never
consumed. It adds too much code complexity and requires processing
on both storage and compute. Removing entirely to make modeling
efficient.
- log (apparently SSH) section will never be consumed in the way it is
coded in model. This section is also not part of model schema itself
due to the point above.
- Introducing telemetry section that is going to carry telemetry
items required for CDash.
Signed-off-by: pmikus <peter.mikus@protonmail.ch>
Change-Id: I7e0256c6c9715de8ee559eed29dce96329aac97d
|
|
- removed old 1_15_0
- removed old 1_14_2
+ updated job_specs
Signed-off-by: Viliam Luc <vluc@cisco.com>
Change-Id: Ie75cde28f485b809fe08f808f4fa7d31d52c3929
|
|
- fix ip6 scale tag
- unified order of tags
Signed-off-by: Viliam Luc <vluc@cisco.com>
Change-Id: I173bd8369167f07a118f607a9c1957e354f772b2
|
|
vxlan is going to a plugin.
https://gerrit.fd.io/r/c/vpp/+/37511
Need to add vxlan_plugin.so to all vxlan test cases
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: Ie7f9c6c61eac4b85aeca769d467ddd0f7d5118f0
Signed-off-by: Vratko Polak <vrpolak@cisco.com>
|
|
vhost is going to a plugin.
https://gerrit.fd.io/r/c/vpp/+/37488
Need to add vhost_plugin.so to all vhost test cases
Signed-off-by: Steven Luong <sluong@cisco.com>
Change-Id: I5c79795c1ba5ffcdc9d10697faffbc0b49b22abb
|
|
Also add 10k tunnels IPSec policy mode test with spd fast path enabled.
spd fast path is to reduce policy adding time, refer to patchset [1] & [2]
for details.
[1] https://gerrit.fd.io/r/c/vpp/+/36095
[2] https://gerrit.fd.io/r/c/vpp/+/36097
Signed-off-by: xinfeng zhao <xinfengx.zhao@intel.com>
Signed-off-by: yulong pei <yulong.pei@intel.com>
Change-Id: I211b38a60d273c46e68a5b5f712090037977c6e6
|
|
Add VPP wireguard async mode test suite to use QAT device for crypto.
Also change keyword ipsechw to cryptohw in suite_setup.robot since currently
crypto device is not only used by IPSec.
Signed-off-by: Yulong Pei <yulong.pei@intel.com>
Signed-off-by: xinfeng zhao <xinfengx.zhao@intel.com>
Change-Id: Ibdadb3b09c04b7181415ffd4a248abddc6289075
|
|
Signed-off-by: Yulong Pei <yulong.pei@intel.com>
Change-Id: I7abd546e67fdbe481b204bb6a1ec7e9c654dcdae
|