aboutsummaryrefslogtreecommitdiffstats
path: root/tests
AgeCommit message (Collapse)AuthorFilesLines
2021-07-12Infra: vpp_device -> Ubuntu 20.04rls2101pmikus1-22/+21
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: If24c385b93e1ba310ea258984c97494b4cab467c (cherry picked from commit f754eac4faf76fdbffac648769c03f5668f9f6a2)
2021-03-03Fix: Async scheduler tests are not hwVratko Polak12-12/+12
Suite name part is correct: swasync. This fixes the tag, from IPSECHW to IPSECSW. Change-Id: I13a5201dade7edf180d315416c82c15d69c1bfce Signed-off-by: Vratko Polak <vrpolak@cisco.com> (cherry picked from commit c2dda6e57c09bf364ee54ae5c81e22fb34c6e0d4)
2021-03-03Add test suites for crypto sw scheduler engineYulong Pei16-0/+2704
This patch is to add test suites for vpp plugin crypto_sw_scheduler, IPsec sync mode is to do crypto and packet forward work in same worker cores, crypto_sw_scheduler can schedule crypto work to other async crypto cores to improve whole crypto processing capability. This test suites configure fixed 1 rx queues per port, then measure IPsec performance with 1, 2, 3 crypto cores. This patchset include 1, 2, 4, 8 ipsec tunnels test cases. +Vratko help to change to count total physical cores instead of previous only count crypto cores in test cases. Change-Id: I0e67182e3d13273890a23703d838101900e25126 Signed-off-by: Yulong Pei <yulong.pei@intel.com> Signed-off-by: Vratko Polak <vrpolak@cisco.com> Signed-off-by: pmikus <pmikus@cisco.com> (cherry picked from commit f0e964d35af36f0923c6ae0421e74d94022cadba)
2021-02-19FIX: Naming convention compliancepmikus4-16/+16
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: Idcee623abbc5568fc6ca49113bc2ff8add179046 (cherry picked from commit 1f6797ed6b662130f55d7629453c5010ed94162a)
2021-02-19Performance: Add GSO tests to report executionpmikus4-4/+4
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I35b2f786105103f19907d74c4f6cc77d7cd3a5bb (cherry picked from commit f09a4dffb4b0643a71f3f85960657a02a419ff3b)
2021-02-19Framework: GSO testpmikus4-4/+4
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I874568aebbe50c38e634438eb1201ca737bd18ad (cherry picked from commit ecfe59f83a49e0dda9cead06b81339e4ea545053)
2021-02-05NAT44ed: Add pure throuhput bidir testsVratko Polak10-0/+1409
+ With ramp-up, without reset, with session verification. + Uses the same profile as pps tests. + Ramp up duration is not specified, as duration is computed. + Timeout tracking with automated ramp-up. + Correct computation of next duration. + Checking both early and late sessions. + No loss measurement also acts as a ramp-up. + Return ReceiveRateMeasurement from send_traffic_on_tg_internal, as that is needed for detecting whether trial is ok as ramp up. - Udp needs quite low ramp-up rate after recent regression. - Max scale has higher rate (so failing) to avoid session timeouts. + Bump copyright year. Change-Id: I50c928659cd5b985b490a2e5fb69c5cd790600b0 Signed-off-by: Vratko Polak <vrpolak@cisco.com> (cherry picked from commit b26fe6de7965f6621b54a80a938f82afe95aa585)
2021-02-01Add suites with randomized ip6 profilesVratko Polak12-12/+843
+ Replace pair of traffic profiles (2n and 3n) with single nodeless one. + Compared to incremental suites, randomized ones add IP6_RND tag. Change-Id: I2f0dfc9e04bbcd0f88e95b92edf2da2c73faaab6 Signed-off-by: Vratko Polak <vrpolak@cisco.com> (cherry picked from commit ad98ea70cf435d104b6a4f0090575e137660da77)
2021-01-21Reconf: Fix bidir/unidir mismatchVratko Polak52-156/+104
Results if NDR search is in TPS (so unidir) since https://gerrit.fd.io/r/c/csit/+/28208 The bug was causing all reconf tests report zero loss, as they used half of NDR load during reconfiguration. + Small improvements to descriptions of other traffic keywords. Change-Id: Ib9af5861cc09e698eb762feb3f0a019571d17962 Signed-off-by: Vratko Polak <vrpolak@cisco.com> (cherry picked from commit 293a88b56179094f655178b838b84844a672390d)
2021-01-20acl: add L2BD dev testsMartin Balaz5-0/+491
Signed-off-by: Martin Balaz <martin.balaz@pantheon.tech> Change-Id: I70127d8dd2241b70511f31842eb8a9e3cbafdc4b Signed-off-by: Jan Gelety <jgelety@cisco.com> (cherry picked from commit 0f3baca2366f969de6b5d3b889c1b05f72995ec2)
2021-01-14Add 3n ip4-rnd testsVratko Polak6-13/+430
+ Rename traffic profiles to avoid mentioning number of nodes. + Improve 2n rnd suite documentation slightly. This is a manual cherry-pick of https://gerrit.fd.io/r/c/csit/+/27679 Change-Id: I82d6fb6a99133163a58d56f2acf8a7b9568ee77c Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2021-01-09perf: GENEVE tunnel test, l3 modeJan Gelety6-0/+930
Jira: CSIT-1768 Change-Id: I888ae1a5754fa07297d4cdf65c2be0e3e49d89a5 Signed-off-by: Jan Gelety <jgelety@cisco.com> (cherry picked from commit 6962831a1f1905e50a3d663c0cf3ce8c2873ecc9) Change-Id: I6496ae773b176b2abfedab843110d6f870c62888 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2021-01-11tests: add 2n1l l2 acl tests, update 2n-tx2 specsJuraj Linkeš53-96/+862
Modify initialize L2BD ACL keywords to be usable for both 2-node and 3-node topologies and update testsuites accordingly. Add the missing macip T-rex profile. Add classifier tests to 2n-tx2 job specs. Change-Id: I17b84b8fc18ef9a6f275ae0238a0665ac2017f01 Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech> (cherry picked from commit 9d510d595f73d26e3f7c6646fa6530e8f252f790)
2021-01-07PAPI: Cache connected client instancesVratko Polak6-6/+12
Disconnect+connect cycle is expensive and slow. This change tracks connected client instances so later "connect" to the same target uses it. Explicit disconnects are allowed (and executed before VPP ends), but once again disconnected instances are cached and reused, as creating a new instance is more expensive than just connect. + Add missing checks on interfaces being up to appropriate keyword. + Use appropriate keywords. + Add a comment explaining why a simpler keyword is not appropriate. + Improve VPP checks in containers. + Fix the vppctl check to actually work. + Add PAPI check to ensure VPP is really ready. + Delay/reorder checks to make them faster with multiple containers. + Leave some TODOs to improve various lifecycles later. + As we do not stop VPP in test/suite teardown: + One final disconnect is needed, added to __init__.robot teardowns. - Import of the final disconnect keyword is ugly, but it works. - We could use a hashable class for distinguishing node+socket pairs. - Are we connecting to VPP inside VMs? Change-Id: I49cd726740c3e8cae1591c7c84b85a447241228f Signed-off-by: Vratko Polak <vrpolak@cisco.com> (cherry picked from commit a33b52ae0f255021d89307ebc694f6e907906151)
2021-01-04API: deprecated COP APIsTomas Alexy8-116/+114
Signed-off-by: Tomas Alexy <tomas.alexy@pantheon.tech> Change-Id: Ifb97088a26f3c2ab2ecee28ed43e6e957a844c64 (cherry picked from commit 9446b9bf9c15999feec3c8a48fec428bca094500)
2021-01-04GSO: TAP/VHOST use casepmikus5-0/+484
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: Ibafaaca4438587284d1e255c764f0701002941e8 (cherry picked from commit 44dcb3113c8ade2e44543746abca861a89362c9b)
2020-12-16API: deprecated IPSEC APIsJan Gelety130-130/+131
Jira: CSIT-1597 + add ipsec_sa tear down action Change-Id: I4d1e6f26c14e61e8ddc6f29fbf5528a034c84eb0 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-12-03vpp-device: GENEVE tunnel test, l3 modeJan Gelety1-0/+107
Jira: CSIT-1769 Change-Id: I98510cd8e627d7347f77d0032b7bac28f2e36c61 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-12-08Revert "vpp-device: GENEVE tunnel test, l3 mode"Peter Mikus1-107/+0
This reverts commit a9f54ca5080aeef17686f300a6807bf9b46b7c90. Reason for revert: DO NOT MERGE BROKEN TESTS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! https://logs.fd.io/production/vex-yul-rot-jenkins-1/csit-vpp-device-master-ubuntu1804-1n-skx/9918/archives/log.html.gz Change-Id: I2ce2970a43e5dd7487eeb54d1ccbb149e06cf8fa Signed-off-by: pmikus <pmikus@cisco.com>
2020-12-03vpp-device: GENEVE tunnel test, l3 modeJan Gelety1-0/+107
Jira: CSIT-1769 Change-Id: I0ab906966f760b809b8431530c010a8f0835d62c Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-11-26Re-enable 9000B tests for ipsecVratko Polak160-0/+1920
Ticket: CSIT-1771 VPP-1207 VPP-1675 Change-Id: I8ba2d62054361e72b833943327434ea071e7e568 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-10-29Support existing test types with ASTFVratko Polak116-1170/+2954
+ Add UDP_CPS, TCP_CPS, UDP_PPS and TCP_PPS suites. + Update existing cps traffic profiles. + Add missing traffic profiles. + UDP: + Single burst of 32 packets was confirmed as safe enough for TRex. + Maybe 64 could work, but not enough testing for that. + Multiple bursts have lead to reduced TRex performance, as overlaping bursts (from different client instances) tend to fill up the buffers. + TCP: + Data size set to 11111 bytes, completely arbitrarily. + Results look reasonable, so I have kept that. - MSS not set at all - No tested support for frame size other than 64B. - Frame size does not even factor into TCP profiles. + So other frame sizes are skipped in autogen. + Update tags in related suites. - HOSTS_{n} and SRC_USER_{n} should be unified. - Questionable clarification on difference between IP4BASE and SCALE. + Add NAT state resetters to tests that need them. + Resetter is called (if set) before each measurement. + If ramp-up is detected, resetter is not set. + Rename "mult" argument to "multiplier". + Abstracted from packets to transactions. + Transaction corresponds to profile. + TRex multiplier argument sets target rate in transactions per second. + The familiar STL traffic: + Bidirectional is considered to be 2 packets per transaction. + Unidirectional is considered to be 1 packet per transaction. + The newer ASTF traffic: + 4 subtypes, each has different number of packets per transaction. + For max rate computation: + Packets in the more numerous direction are considered. + Rely on TRex reported traffic duration for ASTF: + Use the server side value. - Client side value is higher by an overhead. - TRex is not sending traffic during that time. + Remove delays from traffic profiles. - Those delays would increase the reprted traffic time. + Support for scale lmited trials. + Only for ASTF profiles, each ASTF profile has limited scale. + Scale defined in suite variables. + For TRex to send all transactions provided duration value is ignored. + The appropriate value is computed in TrafficGenerator. + An ad-hoc time constant is added to match the TRex client side time overhead. + The profile driver receives the computed duration. + Measurement for PLRsearch add a sleep if the computed duration is smaller. + Alternative argument for search algos if scale is limited. + Both need higher timeout to accomodate big scales. + MLRsearch can afford fewer phases. + Added a parameter to optionally shorten the duration. + Use short duration for runtime stats trial and failure stats trial. + Use very large keepalive values in udp profiles to avoid ka packets. + No polling in ASTF profile driver. - Polling could eliminate the time overhead value. + But polling proved to introduce some loss, affecting the results. + Handle duration stretching in ASTF by stopping traffic. + The stop has several steps so that: + The traffic is really stopped entirely. + Late packets do not count (maybe as errors). + Stats are preserved to read for results (and cleared afterwards). + Several quantities added to ReceiveRateMeasurement: + Original target duration is preserved (algos need that). + Input estimate (tps) for early search iterations. + Output estimate (maybe pps) for MRR output. + Strict result (unsent counts as loss) for NDR. + Use L2 counters (opackets, ipackets) where possible. - TRex has trouble processing packets for the L7 ones at high loads. + Remove warmup from profile drivers and keywords. + Suites should call "Send ramp-up traffic" explicitly if needed. + Added parsing for few more counters. + Both to use in formulas or just for debug purposes. - Only 64B cases in autogen, framesize support to be added later. + Latency streams during search can be enabled via PERF_USE_LATENCY env var. + MLRsearch improvments: + Rename argument names to min_rate and max_rate. + Use relative receive rate in initial phase. + PLRsearch improvements: + Careful computation when output (pps) does not match input (tps). + Use geometric distribution (instead of Poisson). + Helps agains math errors. + This should improve estimate stability. - But in practice big losses still lead to significant jumps. + Traffic generator improvements: + send_traffic_on_tg now calls the full set_rate_provider_defaults. + _send_traffic_on_tg_internal for the logic without provider defaults. + As the internal function is re-used by measure() without affecting defaults. + Move _parse_traffic_results just before get_measurement_result. + As the latter uses fields set bu the former, it is now easier to read. + Multiple sources for approximate duration. + Tried from more precise to more available. + Includes logic for _pps tests (added in later change). + Move explicit type conversions to earlier occurences. + Profile driver output field uses semicolons to simplify parsing. + Performance Robot lib file split to several smaller ones. + performance_actions.robot: + Hosts Additional Statistics Action For * keywords. + performance_display.robot: + Hosts keyword for displaying and verifying results. + Change test message to use the correct unit (pps or cps). + performance_limits.robot renamed to performance_vars.robot + Added many keywords, mostly for accessing test variables. + Moved variables for Policer into a new keyword there. + Some keywords need sophisticated logic. - Other are basically Get Variable Value. + But in future more logic can be added, without editing callers. + Documentation for the new keywords acts as a documentation for test variables. + performance_utils.robot has the rest. + Eliminated arguments if the value is in test variable. + Small improvements to documentation. - Still not enough cleanup with respect to arguments and test variables. + Keywords are sorted alphabetically now in each one. + Suites: + Unified variables table: + No colons in comments. + ${n_hosts}, ${n_ports} and use them instead hardcoded numbers. + Add -cps to existing cps suite names. + Remove "trial data overwrite". + Compute max rate as in STL suites. + Each NAT suite has ip4base suite to compare results to. - Those act as indirect TRex calibration. - VPP does not lose packets in those. + Latency in ASTF suites is disabled hard. - As we do not support latency in ASTF profiles yet. + Unidirectional tests governed by suite variable, not an argument. + Write long argument lists vertically. + Prefer to use argument names. + In Python, also the last argument is followed by comma. + It makes renaming and reordering easier. + Similarly applies to prints with long lists of values. + A TODO to update api crc file comments. Change-Id: I84729355edbec051298a9de1162107f88ff5737d Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-10-23CSIT-1597 NAT44 API: dynamic configJan Gelety17-85/+4
- cover API changes in VPP: https://gerrit.fd.io/r/c/vpp/+/29463 - update vpp stable to version 21.01-rc0~283-g5f4f2081c Change-Id: I079c10e4537448c3b078f22c3fe4ed266a5e2e2c Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-09-17VPP-DEVICE: Add check of vpp statistic commandsJan Gelety1-0/+104
Change-Id: I87f95c14034d89056f71ffaeccafc1d3b71ff933 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-10-19FIX: disable sending IPv6 RA messages from VMsJuraj Linkeš2-2/+2
There were occasional Router Advertisement packets received in a Traffic Generator in VM testcases. Fix by adding config that disables sending IPv6 RA messages on interfaces in VM VPP config before enabling them. Also rename related keywords and change descriptions based on https://docs.fd.io/vpp/21.01/db/d4c/clicmd_src_vnet_ip6-nd.html#clicmd_ip6_nd Change-Id: I1c2a33337ac91f6039d287b4c2aac388e3a52383 Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
2020-10-19Tests: Remove GBPpmikus2-242/+0
- Specs - Tests - Library - TODO: PAL Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I8890940d56c7a9924d4a5f9365b6bb881610db14
2020-10-15FIX: vpp not started with configuration for nat44ed with 16M sessionsJan Gelety1-1/+1
- after merge of commit vppinfra: use heap to store bihash data | https://gerrit.fd.io/r/c/vpp/+/29099 it is necessary to allocate 14GB of memory for main heap in case of nat44ed test with 16.5M sessions Change-Id: I65dccdd4f50382b1b40cdffd2d9031ffb7d3bfa1 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-09-12Test: Add ramp-up phase to nat44ed-udir testsJan Gelety5-10/+35
Change-Id: I3aa50ec1ef9b0445014daa31e767323060f4a03f Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-09-30Framework: Add possibility to send ramp-up trafficJan Gelety6-61/+43
Change-Id: Ie24184ca4ac2d6c7abc32f0f103e10bc402ad93b Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-09-30test: compute max_translations_per_thread based on worker threads numberJan Gelety15-15/+90
Change-Id: I1c638aef886bf37a9feb4a29e4949c7c8f19b717 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-09-30Framework: main heap size value multiplicationJan Gelety8-0/+16
- default value for main heap size set to 2G - allow allocation of n x 2G in tests that need it Change-Id: I02dafe6bc61649d2823486a3e983f66f5a213a88 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-09-24test: nat44det - add session number checkJan Gelety7-165/+81
- some tests need to reduce rate for ramp-up phase - some tests need to extend trail duration in ramp-up phase - removed 2n1l-10ge2p1x710-ethip4udp-nat44det-h1-p63-s63 suite as nat out ports are randomly selected from available port range so T-Rex stateless is not able to provide required out2in traffic Change-Id: I1145496610d202f81d911e68aa819844d7600918 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-09-23Fix: use nat44 not snat44Jan Gelety21-229/+229
Change-Id: If141566f76d5b2f309953233e693c34fef8ee12f Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-09-22test: lisp moved to pluginJan Gelety9-9/+9
- lisp is moving to plugin: https://gerrit.fd.io/r/c/vpp/+/28972 Jira: CSIT-1597 Change-Id: I362f1931b5fc441da9c8a6dda933a66bfed8c4b8 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-09-21Tests: nat44ed-unipmikus5-0/+825
Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: Iee488e2244a4e253471310bc7fb9640c69c6b0cb
2020-09-11Add ipsec async mode performance test casesYulong Pei20-0/+3018
In VPP 20.05, vpp added async crypto engine that support to use QAT hardware to do encryption and decryption, vnet/ipsec enabled async mode to use async crypto engine. Current async crypto engine also use dpdk_cryptodev as async handlers, in the future it may add other native QAT driver as async handlers. Note that async crypto engine is to support vnet/ipsec, it is different with current existing dpdk backend which itself has ESP implementation in plugins/dpdk/ipsec. Change-Id: I4e6eaa7ca1eddb8b1c45212de0684fb26907119b Signed-off-by: Yulong Pei <yulong.pei@intel.com>
2020-09-07VPP-DEV API COV: Add NAT44-DET testsMartin Balaz2-0/+222
Jira: CSIT-1756 Signed-off-by: Martin Balaz <martin.balaz@pantheon.tech> Change-Id: Ia6fdc6df91f36ffcabd428326195bb9d8f967e52
2020-09-07VPP-DEV API COV: Add NAT44-ED testsJan Gelety2-0/+234
Jira: CSIT-1755 Change-Id: I34baa22a49f44da3fa80d91fa2f4132c982fe610 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-09-03Framework: Bump DPDK 20.08pmikus2-5/+5
+ DPDK 20.08 + Migrate make -> meson + Fix all trending issues Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: I31dcb22627c0f8d17ec63c5b138a2da958b006f4
2020-08-09job_specs: use test tag ethip4udp-snat44det-h1-p1-s1 not ethip4udp-ip4base-nat44Jan Gelety1-140/+0
Change-Id: Idb7b415995f0a3474e379b0c023f64a96e886a55 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-08-08Fix: NAT44 deterministic moved to separate det44 pluginJan Gelety23-2532/+105
- align CSIT code with VPP code changes for NAT44 deterministic (DET44) feature - align test names according to snat44ed tests - remove obsolete 3-node nat tests - remove 2n1l-10ge2p1x710-ethip4udp-snat44det-h1048576-p63-s66060288 tests (not enough memory for such high number of sessions) Change-Id: I9a22b99b4cfa56d18e9c7ef9c58296e202567d42 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-08-20Framework: use 'stl' in trex stateless profile namesJan Gelety522-522/+522
Change-Id: I74641cc89d2f25d50b67d51bf2567082b420aabb Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-08-19Perf: NAT44 endpoint-dependent mode - tcp, part IJan Gelety10-0/+1645
Jira: CSIT-1736 - tcp synthetic profiles w/o data packets - tcp cps perf tests, phase I (no special "search cps" KW) Change-Id: I52be34b0fdd51d7a33c8c5de9b46d7064c48f7fa Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-08-07Perf: NAT44 endpoint-dependent mode - udp, part IJan Gelety21-286/+1838
- continuation of https://gerrit.fd.io/r/c/csit/+/26898 as there was reached limit of changes (1000) Jira: CSIT-1711 - udp synthetic profiles w/o data packets - udp cps perf tests, phase I (no special "search cps" KW) Part I means that we are using MRR tests to collect traffic data until there is ready new CPS test type with corresponding algorithm. Change-Id: I0d30feb9ecf1d0bff937152656f8eb422f831378 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-07-23T-Rex: Add advanced stateful modeJan Gelety53-53/+53
- provide base routines to run T-Rex in advanced stateful mode Change-Id: Ib0dc5f2919c370753335f6446860683dc4b12d93 Signed-off-by: Jan Gelety <jgelety@cisco.com>
2020-07-31Framework: Perf stat capturingPeter Mikus2-2/+2
Change-Id: I3bbe1fe0073ddeead5219993675f24955e8c3dfd Signed-off-by: Peter Mikus <pmikus@cisco.com>
2020-07-30Introduce per DUT configurable statspmikus3-9/+45
- test/suite/global - binary logic is not working Signed-off-by: pmikus <pmikus@cisco.com> Change-Id: Ia3d81cbf2c5f04d1093a0a408c84a9ffc6f3eef0
2020-07-16Add ADL plugin to cop testsVratko Polak8-8/+8
The following VPP change renames and moves COP functionality into a brand new plugin: https://gerrit.fd.io/r/c/vpp/+/27916 In a subsequent change we should rename tests and start using the new API messages. This change is just a minimal edit to avoid test failures. Change-Id: I1c4b81060dd533ef447f3cc44443b71c5e524d59 Signed-off-by: Vratko Polak <vrpolak@cisco.com>
2020-06-10NAT44 EI testsMaros Mullner16-0/+2504
Signed-off-by: Maros Mullner <maros.mullner@pantheon.tech> Change-Id: Ib5f58f60a1409ed139e2846793bf52fdc02a6571
2020-06-09Remove leading tc[nn] from test namesJuraj Linkeš560-5657/+5657
The test names are unique without it and the information doesn't add anything extra. Change-Id: Idc7d6d1d21c8c05691e1757227a0a3787406d370 Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>