#!/bin/bash
# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

set -x

cat /etc/hostname
cat /etc/hosts

ARCHIVE_ARTIFACTS=(log.html output.xml report.html)

SCRIPT_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )"
export PYTHONPATH=${SCRIPT_DIR}

export DEBIAN_FRONTEND=noninteractive
sudo apt-get -y update
sudo apt-get -y install libpython2.7-dev python-virtualenv

VIRL_SERVERS=("10.30.51.28" "10.30.51.29" "10.30.51.30")
VIRL_SERVER=""

VIRL_USERNAME=jenkins-in
VIRL_PKEY=priv_key
VIRL_SERVER_STATUS_FILE="status"
VIRL_SERVER_EXPECTED_STATUS="PRODUCTION"

SSH_OPTIONS="-i ${VIRL_PKEY} -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null -o BatchMode=yes -o LogLevel=error"

DPDK_VERSION=16.11.1
DPDK_DIR=dpdk
DPDK_PACKAGE=${DPDK_DIR}"-"${DPDK_VERSION}.tar.xz

function ssh_do() {
    echo
    echo "### "  ssh $@
    ssh ${SSH_OPTIONS} $@
}

rm -f ${VIRL_PKEY}
cat > ${VIRL_PKEY} <<EOF
-----BEGIN RSA PRIVATE KEY-----
MIIEpQIBAAKCAQEA+IHXq87GcqMR1C47rzx6Cbip5Ghq8pKrbqKrP5Nf41HcYrT6
GOXl9nFWKsMOzIlIn+8y7Il27eZh7csQGApbg8QLiHMtcYEmWNzKZpkqg4nuAPxX
VXwlKgnKX902SrET9Gp9TDayiHtCRWVfrlPPPSA0UEXW6BjLN/uHJ+W/Xzrrab+9
asBVa05vT2W6n0KJ66zfCaeDM912mQ6SttscAwFoWDmdHlegiVqrlIG2ABxOvxxz
L3dM3iSmlmQlzv9bThjo+nI4KFYh6m5wrZmAo5r/4q9CIJc21HVnTqkGOWJIZz6J
73lePJVSq5gYqaoGw3swFEA/MDkOx7baWKSoLQIDAQABAoIBAQCNBeolNp+JWJ76
gQ4fwLsknyXSV6sxYyhkDW4PEwwcTU06uqce0AAzXVffxne0fMe48x47+zqBgPbb
4huM+Pu8B9nfojUMr5TaYtl9Zbgpk3F8H7dT7LKOa6XrxvZTZrADSRc30+Z26zPN
e9zTaf42Gvt0/l0Zs1BHwbaOXqO+XuwJ3/F9Sf3PQYWXD3EOWjpHDP/X/1vAs6lV
SLkm6J/9KKE1m6I6LTYjIXuYt4SXybW6N2TSy54hhQtYcDUnIU2hR/PHVWKrGA0J
kELgrtTNTdbML27O5gFWU4PLUEYTZ9fN11D6qUZKxLcPOiPPHXkiILMRCCnG5DYI
ksBAU/YlAoGBAPxZO9VO18TYc8THV1nLKcvT2+1oSs1UcA2wNQMU55t910ZYinRa
MRwUhMOf8Mv5wOeiZaRICQB1PnVWtDVmGECgPpK6jUxqAwn8rgJcnoafLGL5YKMY
RVafTe6N5LXgCaOcJrk21wxs6v7ninEbUxxc575urOvZMBkymDw91dwbAoGBAPwa
YRhKhrzFKZzdK0RadVjnxKvolUllpoqqg3XuvmeAJHAOAnaOgVWq68NAcp5FZJv0
2D2Up7TX8pjf9MofP1SJbcraKBpK4NzfNkA0dSdEi+FhVofAJ9umB2o5LW1n7sab
UIrjsdzSJK/9Zb9yTTHPyibYzNEgaJV1HsbxfEFXAoGAYO2RmvRm0phll18OQVJV
IpKk9kLKAKZ/R/K32hAsikBC8SVPQTPniyaifFWx81diblalff2hX4ipTf7Yx24I
wMIMZuW7Im/R7QMef4+94G3Bad7p7JuE/qnAEHJ2OBnu+eYfxaK35XDsrq6XMazS
NqHE7hOq3giVfgg+C12hCKMCgYEAtu9dbYcG5owbehxzfRI2/OCRsjz/t1bv1seM
xVMND4XI6xb/apBWAZgZpIFrqrWoIBM3ptfsKipZe91ngBPUnL9s0Dolx452RVAj
yctHB8uRxWYgqDkjsxtzXf1HnZBBkBS8CUzYj+hdfuddoeKLaY3invXLCiV+PpXS
U4KAK9kCgYEAtSv0m5+Fg74BbAiFB6kCh11FYkW94YI6B/E2D/uVTD5dJhyEUFgZ
cWsudXjMki8734WSpMBqBp/J8wG3C9ZS6IpQD+U7UXA+roB7Qr+j4TqtWfM+87Rh
maOpG56uAyR0w5Z9BhwzA3VakibVk9KwDgZ29WtKFzuATLFnOtCS46E=
-----END RSA PRIVATE KEY-----
EOF
chmod 600 ${VIRL_PKEY}

#
# Pick a random host from the array of VIRL servers, and attempt
# to reach it and verify it's status.
#
# The server must be reachable, and have a "status" file with
# the content "PRODUCTION", to be selected.
#
# If the server is not reachable, or does not have the correct
# status, remove it from the array and start again.
#
# Abort if there are no more servers left in the array.
#
while [[ ! "$VIRL_SERVER" ]]
do
    num_hosts=${#VIRL_SERVERS[@]}
    if [ $num_hosts == 0 ]
    then
        echo "No more VIRL candidate hosts available, failing."
        exit 127
    fi
    element=$[ $RANDOM % $num_hosts ]
    virl_server_candidate=${VIRL_SERVERS[$element]}
    virl_server_status=$(ssh ${SSH_OPTIONS} ${VIRL_USERNAME}@${virl_server_candidate} cat $VIRL_SERVER_STATUS_FILE 2>&1)
    echo VIRL HOST $virl_server_candidate status is \"$virl_server_status\"
    if [ "$virl_server_status" == "$VIRL_SERVER_EXPECTED_STATUS" ]
    then
        # Candidate is in good status. Select this server.
        VIRL_SERVER="$virl_server_candidate"
    else
        # Candidate is in bad status. Remove from array.
        VIRL_SERVERS=("${VIRL_SERVERS[@]:0:$element}" "${VIRL_SERVERS[@]:$[$element+1]}")
    fi
done


#we will pack all the TLDK depend files and copy it to the VIRL_SERVER
VIRL_DIR_LOC="/tmp"
TLDK_TAR_FILE="tldk_depends.tar.gz"

wget "fast.dpdk.org/rel/${DPDK_PACKAGE}"

tar zcf ${TLDK_TAR_FILE} ${DPDK_PACKAGE} ./tldk/ \
    ./tests/tldk/tldk_testconfig/

cat ${VIRL_PKEY}
# Copy the files to VIRL host
scp ${SSH_OPTIONS} ${TLDK_TAR_FILE} \
    ${VIRL_USERNAME}@${VIRL_SERVER}:${VIRL_DIR_LOC}/

result=$?
if [ "${result}" -ne "0" ]; then
    echo "Failed to copy tldk package file to virl host"
    echo ${result}
    exit ${result}
fi

# Start a simulation on VIRL server
echo "Starting simulation on VIRL server"

VIRL_TOPOLOGY=double-ring-nested.xenial
VIRL_RELEASE=csit-ubuntu-16.04.1_2017-07-26_1.9

function stop_virl_simulation {
    ssh ${SSH_OPTIONS} ${VIRL_USERNAME}@${VIRL_SERVER}\
        "stop-testcase ${VIRL_SID}"
}

# Upon script exit, cleanup the simulation execution
trap stop_virl_simulation EXIT

# use the start-testcase-TLDK for the TLDK test case
VIRL_SID=$(ssh ${SSH_OPTIONS} \
    ${VIRL_USERNAME}@${VIRL_SERVER} \
    "start-testcase-TLDK -c ${VIRL_TOPOLOGY} -r ${VIRL_RELEASE} ${VIRL_DIR_LOC}/${TLDK_TAR_FILE}")
retval=$?
if [ "${retval}" -ne "0" ]; then
    echo "VIRL simulation start failed"
    exit ${retval}
fi

if [[ ! "${VIRL_SID}" =~ session-[a-zA-Z0-9_]{6} ]]; then
    echo "No VIRL session ID reported."
    exit 127
fi

echo ${VIRL_SID}

ssh_do ${VIRL_USERNAME}@${VIRL_SERVER} cat /scratch/${VIRL_SID}/topology.yaml

# Download the topology file from virl session
scp ${SSH_OPTIONS} \
    ${VIRL_USERNAME}@${VIRL_SERVER}:/scratch/${VIRL_SID}/topology.yaml \
    topologies/enabled/topology.yaml

retval=$?
if [ "${retval}" -ne "0" ]; then
    echo "Failed to copy topology file from VIRL simulation"
    exit ${retval}
fi

# create a python virtual environment env
virtualenv --system-site-packages env
. env/bin/activate

echo pip install
pip install -r ${SCRIPT_DIR}/requirements.txt

pykwalify -s ${SCRIPT_DIR}/resources/topology_schemas/3_node_topology.sch.yaml \
          -s ${SCRIPT_DIR}/resources/topology_schemas/topology.sch.yaml \
          -d ${SCRIPT_DIR}/topologies/enabled/topology.yaml \
          -vvv

if [ "$?" -ne "0" ]; then
    echo "Topology schema validation failed."
    echo "However, the tests will start."
fi

PYTHONPATH=`pwd` pybot -L TRACE -W 150 \
    -v TOPOLOGY_PATH:${SCRIPT_DIR}/topologies/enabled/topology.yaml \
    --suite "tests.tldk.func" \
    --include vm_envAND3_node_single_link_topo \
    --noncritical EXPECTED_FAILING \
    tests/

RETURN_STATUS=$(echo $?)

# Archive artifacts
mkdir archive
for i in ${ARCHIVE_ARTIFACTS[@]}; do
    cp $( readlink -f ${i} | tr '\n' ' ' ) archive/
done

exit ${RETURN_STATUS}