path: root/resources/libraries/python/DUTSetup.py

# Copyright (c) 2019 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

"""DUT setup library."""

from robot.api import logger

from resources.libraries.python.Constants import Constants
from resources.libraries.python.ssh import SSH, exec_cmd_no_error
from resources.libraries.python.topology import NodeType, Topology


class DUTSetup:
    """Contains methods for setting up DUTs."""

    @staticmethod
    def get_service_logs(node, service):
        """Get specific service unit logs from node.

        :param node: Node in the topology.
        :param service: Service unit name.
        :type node: dict
        :type service: str
        """
        command = u"echo $(< /tmp/*supervisor*.log)"\
            if DUTSetup.running_in_container(node) \
            else f"journalctl --no-pager --unit={service} " \
            f"--since=\"$(echo `systemctl show -p ActiveEnterTimestamp " \
            f"{service}` | awk \'{{print $2 $3}}\')\""
        message = f"Node {node[u'host']} failed to get logs from unit {service}"

        exec_cmd_no_error(
            node, command, timeout=30, sudo=True, message=message
        )

    @staticmethod
    def get_service_logs_on_all_duts(nodes, service):
        """Get specific service unit logs from all DUTs.

        :param nodes: Nodes in the topology.
        :param service: Service unit name.
        :type nodes: dict
        :type service: str
        """
        for node in nodes.values():
            if node[u"type"] == NodeType.DUT:
                DUTSetup.get_service_logs(node, service)

    @staticmethod
    def restart_service(node, service):
        """Restart the named service on node.

        :param node: Node in the topology.
        :param service: Service unit name.
        :type node: dict
        :type service: str
        """
        command = f"supervisorctl restart {service}" \
            if DUTSetup.running_in_container(node) \
            else f"service {service} restart"
        message = f"Node {node[u'host']} failed to restart service {service}"

        exec_cmd_no_error(
            node, command, timeout=180, sudo=True, message=message
        )

        DUTSetup.get_service_logs(node, service)

    @staticmethod
    def restart_service_on_all_duts(nodes, service):
        """Restart the named service on all DUTs.

        :param nodes: Nodes in the topology.
        :param service: Service unit name.
        :type nodes: dict
        :type service: str
        """
        for node in nodes.values():
            if node[u"type"] == NodeType.DUT:
                DUTSetup.restart_service(node, service)

    @staticmethod
    def start_service(node, service):
        """Start up the named service on node.

        :param node: Node in the topology.
        :param service: Service unit name.
        :type node: dict
        :type service: str
        """
        # TODO: change command to start once all parent function updated.
        command = f"supervisorctl restart {service}" \
            if DUTSetup.running_in_container(node) \
            else f"service {service} restart"
        message = f"Node {node[u'host']} failed to start service {service}"

        exec_cmd_no_error(
            node, command, timeout=180, sudo=True, message=message
        )

        DUTSetup.get_service_logs(node, service)

    @staticmethod
    def start_service_on_all_duts(nodes, service):
        """Start up the named service on all DUTs.

        :param nodes: Nodes in the topology.
        :param service: Service unit name.
        :type nodes: dict
        :type service: str
        """
        for node in nodes.values():
            if node[u"type"] == NodeType.DUT:
                DUTSetup.start_service(node, service)

    @staticmethod
    def stop_service(node, service):
        """Stop the named service on node.

        :param node: Node in the topology.
        :param service: Service unit name.
        :type node: dict
        :type service: str
        """
        command = f"supervisorctl stop {service}" \
            if DUTSetup.running_in_container(node) \
            else f"service {service} stop"
        message = f"Node {node[u'host']} failed to stop service {service}"

        exec_cmd_no_error(
            node, command, timeout=180, sudo=True, message=message
        )

        DUTSetup.get_service_logs(node, service)

    @staticmethod
    def stop_service_on_all_duts(nodes, service):
        """Stop the named service on all DUTs.

        :param nodes: Nodes in the topology.
        :param service: Service unit name.
        :type nodes: dict
        :type service: str
        """
        for node in nodes.values():
            if node[u"type"] == NodeType.DUT:
                DUTSetup.stop_service(node, service)

    @staticmethod
    def get_vpp_pid(node):
        """Get PID of running VPP process.

        :param node: DUT node.
        :type node: dict
        :returns: PID
        :rtype: int
        :raises RuntimeError: If it is not possible to get the PID.
        """
        ssh = SSH()
        ssh.connect(node)

        retval = None
        for i in range(3):
            logger.trace(f"Try {i}: Get VPP PID")
            ret_code, stdout, stderr = ssh.exec_command(u"pidof vpp")

            if int(ret_code):
                raise RuntimeError(
                    f"Not possible to get PID of VPP process on node: "
                    f"{node[u'host']}\n {stdout + stderr}"
                )

            pid_list = stdout.split()
            if len(pid_list) == 1:
                retval = int(stdout)
            elif not pid_list:
                logger.debug(f"No VPP PID found on node {node[u'host']}")
                continue
            else:
                logger.debug(
                    f"More then one VPP PID found on node {node[u'host']}"
                )
                retval = [int(pid) for pid in pid_list]

        return retval

    @staticmethod
    def get_vpp_pids(nodes):
        """Get PID of running VPP process on all DUTs.

        :param nodes: DUT nodes.
        :type nodes: dict
        :returns: PIDs
        :rtype: dict
        """
        pids = dict()
        for node in nodes.values():
            if node[u"type"] == NodeType.DUT:
                pids[node[u"host"]] = DUTSetup.get_vpp_pid(node)
        return pids

    @staticmethod
    def crypto_device_verify(node, crypto_type, numvfs, force_init=False):
        """Verify if Crypto QAT device virtual functions are initialized on all
        DUTs. If parameter force initialization is set to True, then try to
        initialize or remove VFs on QAT.

        :param node: DUT node.
        :crypto_type: Crypto device type - HW_DH895xcc or HW_C3xxx.
        :param numvfs: Number of VFs to initialize, 0 - disable the VFs.
        :param force_init: If True then try to initialize to specific value.
        :type node: dict
        :type crypto_type: string
        :type numvfs: int
        :type force_init: bool
        :returns: nothing
        :raises RuntimeError: If QAT VFs are not created and force init is set
                              to False.
        """
        pci_addr = Topology.get_cryptodev(node)
        sriov_numvfs = DUTSetup.get_sriov_numvfs(node, pci_addr)

        if sriov_numvfs != numvfs:
            if force_init:
                # QAT is not initialized and we want to initialize with numvfs
                DUTSetup.crypto_device_init(node, crypto_type, numvfs)
            else:
                raise RuntimeError(
                    f"QAT device failed to create VFs on {node[u'host']}"
                )

    @staticmethod
    def crypto_device_init(node, crypto_type, numvfs):
        """Init Crypto QAT device virtual functions on DUT.

        :param node: DUT node.
        :crypto_type: Crypto device type - HW_DH895xcc or HW_C3xxx.
        :param numvfs: Number of VFs to initialize, 0 - disable the VFs.
        :type node: dict
        :type crypto_type: string
        :type numvfs: int
        :returns: nothing
        :raises RuntimeError: If failed to stop VPP or QAT failed to initialize.
        """
        if crypto_type == u"HW_DH895xcc":
            kernel_mod = u"qat_dh895xcc"
            kernel_drv = u"dh895xcc"
        elif crypto_type == u"HW_C3xxx":
            kernel_mod = u"qat_c3xxx"
            kernel_drv = u"c3xxx"
        else:
            raise RuntimeError(
                f"Unsupported crypto device type on {node[u'host']}"
            )

        pci_addr = Topology.get_cryptodev(node)

        # QAT device must be re-bound to kernel driver before initialization.
        DUTSetup.verify_kernel_module(node, kernel_mod, force_load=True)

        # Stop VPP to prevent deadlock.
        DUTSetup.stop_service(node, Constants.VPP_UNIT)

        current_driver = DUTSetup.get_pci_dev_driver(
            node, pci_addr.replace(u":", r"\:")
        )
        if current_driver is not None:
            DUTSetup.pci_driver_unbind(node, pci_addr)

        # Bind to kernel driver.
        DUTSetup.pci_driver_bind(node, pci_addr, kernel_drv)

        # Initialize QAT VFs.
        if numvfs > 0:
            DUTSetup.set_sriov_numvfs(node, pci_addr, numvfs)

    @staticmethod
    def get_virtfn_pci_addr(node, pf_pci_addr, vf_id):
        """Get PCI address of Virtual Function.

        :param node: DUT node.
        :param pf_pci_addr: Physical Function PCI address.
        :param vf_id: Virtual Function number.
        :type node: dict
        :type pf_pci_addr: str
        :type vf_id: int
        :returns: Virtual Function PCI address.
        :rtype: int
        :raises RuntimeError: If failed to get Virtual Function PCI address.
        """
        command = f"sh -c \"basename $(readlink " \
            f"/sys/bus/pci/devices/{pf_pci_addr}/virtfn{vf_id})\""
        message = u"Failed to get virtual function PCI address."

        stdout, _ = exec_cmd_no_error(
            node, command, timeout=30, sudo=True, message=message
        )

        return stdout.strip()

    @staticmethod
    def get_sriov_numvfs(node, pf_pci_addr):
        """Get number of SR-IOV VFs.

        :param node: DUT node.
        :param pf_pci_addr: Physical Function PCI device address.
        :type node: dict
        :type pf_pci_addr: str
        :returns: Number of VFs.
        :rtype: int
        :raises RuntimeError: If PCI device is not SR-IOV capable.
        """
        pci = pf_pci_addr.replace(u":", r"\:")
        command = f"cat /sys/bus/pci/devices/{pci}/sriov_numvfs"
        message = f"PCI device {pf_pci_addr} is not a SR-IOV device."

        for _ in range(3):
            stdout, _ = exec_cmd_no_error(
                node, command, timeout=30, sudo=True, message=message
            )
            try:
                sriov_numvfs = int(stdout)
            except ValueError:
                logger.trace(
                    f"Reading sriov_numvfs info failed on {node[u'host']}"
                )
            else:
                return sriov_numvfs

    @staticmethod
    def set_sriov_numvfs(node, pf_pci_addr, numvfs=0):
        """Init or reset SR-IOV virtual functions by setting its number on PCI
        device on DUT. Setting to zero removes all VFs.

        :param node: DUT node.
        :param pf_pci_addr: Physical Function PCI device address.
        :param numvfs: Number of VFs to initialize, 0 - removes the VFs.
        :type node: dict
        :type pf_pci_addr: str
        :type numvfs: int
        :raises RuntimeError: Failed to create VFs on PCI.
        """
        pci = pf_pci_addr.replace(u":", r"\:")
        command = f"sh -c \"echo {numvfs} | " \
            f"tee /sys/bus/pci/devices/{pci}/sriov_numvfs\""
        message = f"Failed to create {numvfs} VFs on {pf_pci_addr} device " \
            f"on {node[u'host']}"

        exec_cmd_no_error(
            node, command, timeout=120, sudo=True, message=message
        )

    @staticmethod
    def pci_driver_unbind(node, pci_addr):
        """Unbind PCI device from current driver on node.

        :param node: DUT node.
        :param pci_addr: PCI device address.
        :type node: dict
        :type pci_addr: str
        :raises RuntimeError: If PCI device unbind failed.
        """
        pci = pci_addr.replace(u":", r"\:")
        command = f"sh -c \"echo {pci_addr} | " \
            f"tee /sys/bus/pci/devices/{pci}/driver/unbind\""
        message = f"Failed to unbind PCI device {pci_addr} on {node[u'host']}"

        exec_cmd_no_error(
            node, command, timeout=120, sudo=True, message=message
        )

    @staticmethod
    def pci_driver_bind(node, pci_addr, driver):
        """Bind PCI device to driver on node.

        :param node: DUT node.
        :param pci_addr: PCI device address.
        :param driver: Driver to bind.
        :type node: dict
        :type pci_addr: str
        :type driver: str
        :raises RuntimeError: If PCI device bind failed.
        """
        message = f"Failed to bind PCI device {pci_addr} to {driver} " \
            f"on host {node[u'host']}"
        pci = pci_addr.replace(u":", r"\:")
        command = f"sh -c \"echo {driver} | " \
            f"tee /sys/bus/pci/devices/{pci}/driver_override\""

        exec_cmd_no_error(
            node, command, timeout=120, sudo=True, message=message
        )

        command = f"sh -c \"echo {pci_addr} | " \
            f"tee /sys/bus/pci/drivers/{driver}/bind\""

        exec_cmd_no_error(
            node, command, timeout=120, sudo=True, message=message
        )

        command = f"sh -c \"echo  | " \
            f"tee /sys/bus/pci/devices/{pci}/driver_override\""

        exec_cmd_no_error(
            node, command, timeout=120, sudo=True, message=message
        )

    @staticmethod
    def pci_vf_driver_unbind(node, pf_pci_addr, vf_id):
        """Unbind Virtual Function from driver on node.

        :param node: DUT node.
        :param pf_pci_addr: PCI device address.
        :param vf_id: Virtual Function ID.
        :type node: dict
        :type pf_pci_addr: str
        :type vf_id: int
        :raises RuntimeError: If Virtual Function unbind failed.
        """
        vf_pci_addr = DUTSetup.get_virtfn_pci_addr(node, pf_pci_addr, vf_id)
        pf_pci = pf_pci_addr.replace(u":", r"\:")
        vf_path = f"/sys/bus/pci/devices/{pf_pci}/virtfn{vf_id}"

        command = f"sh -c \"echo {vf_pci_addr} | tee {vf_path}/driver/unbind\""
        message = f"Failed to unbind VF {vf_pci_addr} on {node[u'host']}"

        exec_cmd_no_error(
            node, command, timeout=120, sudo=True, message=message
        )

    @staticmethod
    def pci_vf_driver_bind(node, pf_pci_addr, vf_id, driver):
        """Bind Virtual Function to driver on node.

        :param node: DUT node.
        :param pf_pci_addr: PCI device address.
        :param vf_id: Virtual Function ID.
        :param driver: Driver to bind.
        :type node: dict
        :type pf_pci_addr: str
        :type vf_id: int
        :type driver: str
        :raises RuntimeError: If PCI device bind failed.
        """
        vf_pci_addr = DUTSetup.get_virtfn_pci_addr(node, pf_pci_addr, vf_id)
        pf_pci = pf_pci_addr.replace(u":", r'\:')
        vf_path = f"/sys/bus/pci/devices/{pf_pci}/virtfn{vf_id}"

        message = f"Failed to bind VF {vf_pci_addr} to {driver} " \
            f"on {node[u'host']}"
        command = f"sh -c \"echo {driver} | tee {vf_path}/driver_override\""

        exec_cmd_no_error(
            node, command, timeout=120, sudo=True, message=message
        )

        command = f"sh -c \"echo {vf_pci_addr} | " \
            f"tee /sys/bus/pci/drivers/{driver}/bind\""

        exec_cmd_no_error(
            node, command, timeout=120, sudo=True, message=message
        )

        command = f"sh -c \"echo  | tee {vf_path}/driver_override\""

        exec_cmd_no_error(
            node, command, timeout=120, sudo=True, message=message
        )

    @staticmethod
    def get_pci_dev_driver(node, pci_addr):
        """Get current PCI device driver on node.

        .. note::
            # lspci -vmmks 0000:00:05.0
            Slot:   00:05.0
            Class:  Ethernet controller
            Vendor: Red Hat, Inc
            Device: Virtio network device
            SVendor:        Red Hat, Inc
            SDevice:        Device 0001
            PhySlot:        5
            Driver: virtio-pci

        :param node: DUT node.
        :param pci_addr: PCI device address.
        :type node: dict
        :type pci_addr: str
        :returns: Driver or None
        :raises RuntimeError: If PCI rescan or lspci command execution failed.
        :raises RuntimeError: If it is not possible to get the interface driver
            information from the node.
        """
        ssh = SSH()
        ssh.connect(node)

        for i in range(3):
            logger.trace(f"Try number {i}: Get PCI device driver")

            cmd = f"lspci -vmmks {pci_addr}"
            ret_code, stdout, _ = ssh.exec_command(cmd)
            if int(ret_code):
                raise RuntimeError(f"'{cmd}' failed on '{node[u'host']}'")

            for line in stdout.splitlines():
                if not line:
                    continue
                name = None
                value = None
                try:
                    name, value = line.split(u"\t", 1)
                except ValueError:
                    if name == u"Driver:":
                        return None
                if name == u"Driver:":
                    return value

            if i < 2:
                logger.trace(
                    f"Driver for PCI device {pci_addr} not found, "
                    f"executing pci rescan and retrying"
                )
                cmd = u"sh -c \"echo 1 > /sys/bus/pci/rescan\""
                ret_code, _, _ = ssh.exec_command_sudo(cmd)
                if int(ret_code) != 0:
                    raise RuntimeError(f"'{cmd}' failed on '{node[u'host']}'")

        return None

    @staticmethod
    def verify_kernel_module(node, module, force_load=False):
        """Verify if kernel module is loaded on node. If parameter force
        load is set to True, then try to load the modules.

        :param node: Node.
        :param module: Module to verify.
        :param force_load: If True then try to load module.
        :type node: dict
        :type module: str
        :type force_load: bool
        :raises RuntimeError: If module is not loaded or failed to load.
        """
        command = f"grep -w {module} /proc/modules"
        message = f"Kernel module {module} is not loaded " \
            f"on host {node[u'host']}"

        try:
            exec_cmd_no_error(
                node, command, timeout=30, sudo=False, message=message
            )
        except RuntimeError:
            if force_load:
                # Module is not loaded and we want to load it
                DUTSetup.load_kernel_module(node, module)
            else:
                raise

    @staticmethod
    def verify_kernel_module_on_all_duts(nodes, module, force_load=False):
        """Verify if kernel module is loaded on all DUTs. If parameter force
        load is set to True, then try to load the modules.

        :param nodes: DUT nodes.
        :param module: Module to verify.
        :param force_load: If True then try to load module.
        :type nodes: dict
        :type module: str
        :type force_load: bool
        """
        for node in nodes.values():
            if node[u"type"] == NodeType.DUT:
                DUTSetup.verify_kernel_module(node, module, force_load)

    @staticmethod
    def verify_uio_driver_on_all_duts(nodes):
        """Verify if uio driver kernel module is loaded on all DUTs. If module
        is not present it will try to load it.

        :param nodes: DUT nodes.
        :type nodes: dict
        """
        for node in nodes.values():
            if node[u"type"] == NodeType.DUT:
                uio_driver = Topology.get_uio_driver(node)
                DUTSetup.verify_kernel_module(node, uio_driver, force_load=True)

    @staticmethod
    def load_kernel_module(node, module):
        """Load kernel module on node.

        :param node: DUT node.
        :param module: Module to load.
        :type node: dict
        :type module: str
        :returns: nothing
        :raises RuntimeError: If loading failed.
        """
        command = f"modprobe {module}"
        message = f"Failed to load {module} on host {node[u'host']}"

        exec_cmd_no_error(node, command, timeout=30, sudo=True, message=message)

    @staticmethod
    def install_vpp_on_all_duts(nodes, vpp_pkg_dir):
        """Install VPP on all DUT nodes. Start the VPP service in case of
        systemd is not available or does not support autostart.

        :param nodes: Nodes in the topology.
        :param vpp_pkg_dir: Path to directory where VPP packages are stored.
        :type nodes: dict
        :type vpp_pkg_dir: str
        :raises RuntimeError: If failed to remove or install VPP.
        """
        for node in nodes.values():
            message = f"Failed to install VPP on host {node[u'host']}!"
            if node[u"type"] == NodeType.DUT:
                command = u"ln -s /dev/null /etc/sysctl.d/80-vpp.conf || true"
                exec_cmd_no_error(node, command, sudo=True)

                command = u". /etc/lsb-release; echo \"${DISTRIB_ID}\""
                stdout, _ = exec_cmd_no_error(node, command)

                if stdout.strip() == u"Ubuntu":
                    exec_cmd_no_error(
                        node, u"apt-get purge -y '*vpp*' || true",
                        timeout=120, sudo=True
                    )
                    # workaround to avoid installation of vpp-api-python
                    exec_cmd_no_error(
                        node, u"rm -f {vpp_pkg_dir}vpp-api-python.deb",
                        timeout=120, sudo=True
                    )
                    exec_cmd_no_error(
                        node, f"dpkg -i --force-all {vpp_pkg_dir}*.deb",
                        timeout=120, sudo=True, message=message
                    )
                    exec_cmd_no_error(node, u"dpkg -l | grep vpp", sudo=True)
                    if DUTSetup.running_in_container(node):
                        DUTSetup.restart_service(node, Constants.VPP_UNIT)
                else:
                    exec_cmd_no_error(
                        node, u"yum -y remove '*vpp*' || true",
                        timeout=120, sudo=True
                    )
                    # workaround to avoid installation of vpp-api-python
                    exec_cmd_no_error(
                        node, u"rm -f {vpp_pkg_dir}vpp-api-python.rpm",
                        timeout=120, sudo=True
                    )
                    exec_cmd_no_error(
                        node, f"rpm -ivh {vpp_pkg_dir}*.rpm",
                        timeout=120, sudo=True, message=message
                    )
                    exec_cmd_no_error(node, u"rpm -qai '*vpp*'", sudo=True)
                    DUTSetup.restart_service(node, Constants.VPP_UNIT)

    @staticmethod
    def running_in_container(node):
        """This method tests if topology node is running inside container.

        :param node: Topology node.
        :type node: dict
        :returns: True if running in docker container, false if not or failed
            to detect.
        :rtype: bool
        """
        command = u"fgrep docker /proc/1/cgroup"
        message = u"Failed to get cgroup settings."
        try:
            exec_cmd_no_error(
                node, command, timeout=30, sudo=False, message=message
            )
        except RuntimeError:
            return False
        return True

    @staticmethod
    def get_docker_mergeddir(node, uuid):
        """Get Docker overlay for MergedDir diff.

        :param node: DUT node.
        :param uuid: Docker UUID.
        :type node: dict
        :type uuid: str
        :returns: Docker container MergedDir.
        :rtype: str
        :raises RuntimeError: If getting output failed.
        """
        command = f"docker inspect " \
            f"--format='{{{{.GraphDriver.Data.MergedDir}}}}' {uuid}"
        message = f"Failed to get directory of {uuid} on host {node[u'host']}"

        stdout, _ = exec_cmd_no_error(node, command, sudo=True, message=message)
        return stdout.strip()

    @staticmethod
    def get_huge_page_size(node):
        """Get default size of huge pages in system.

        :param node: Node in the topology.
        :type node: dict
        :returns: Default size of free huge pages in system.
        :rtype: int
        :raises RuntimeError: If reading failed for three times.
        """
        ssh = SSH()
        ssh.connect(node)

        for _ in range(3):
            ret_code, stdout, _ = ssh.exec_command_sudo(
                u"grep Hugepagesize /proc/meminfo | awk '{ print $2 }'"
            )
            if ret_code == 0:
                try:
                    huge_size = int(stdout)
                except ValueError:
                    logger.trace(u"Reading huge page size information failed")
                else:
                    break
        else:
            raise RuntimeError(u"Getting huge page size information failed.")
        return huge_size

    @staticmethod
    def get_huge_page_free(node, huge_size):
        """Get number of free huge pages in system.

        :param node: Node in the topology.
        :param huge_size: Size of hugepages.
        :type node: dict
        :type huge_size: int
        :returns: Number of free huge pages in system.
        :rtype: int
        :raises RuntimeError: If reading failed for three times.
        """
        # TODO: add numa aware option
        ssh = SSH()
        ssh.connect(node)

        for _ in range(3):
            ret_code, stdout, _ = ssh.exec_command_sudo(
                f"cat /sys/kernel/mm/hugepages/hugepages-{huge_size}kB/"
                f"free_hugepages"
            )
            if ret_code == 0:
                try:
                    huge_free = int(stdout)
                except ValueError:
                    logger.trace(u"Reading free huge pages information failed")
                else:
                    break
        else:
            raise RuntimeError(u"Getting free huge pages information failed.")
        return huge_free

    @staticmethod
    def get_huge_page_total(node, huge_size):
        """Get total number of huge pages in system.

        :param node: Node in the topology.
        :param huge_size: Size of hugepages.
        :type node: dict
        :type huge_size: int
        :returns: Total number of huge pages in system.
        :rtype: int
        :raises RuntimeError: If reading failed for three times.
        """
        # TODO: add numa aware option
        ssh = SSH()
        ssh.connect(node)

        for _ in range(3):
            ret_code, stdout, _ = ssh.exec_command_sudo(
                f"cat /sys/kernel/mm/hugepages/hugepages-{huge_size}kB/"
                f"nr_hugepages"
            )
            if ret_code == 0:
                try:
                    huge_total = int(stdout)
                except ValueError:
                    logger.trace(u"Reading total huge pages information failed")
                else:
                    break
        else:
            raise RuntimeError(u"Getting total huge pages information failed.")
        return huge_total

    @staticmethod
    def check_huge_page(node, huge_mnt, mem_size, allocate=False):
        """Check if there is enough HugePages in system. If allocate is set to
        true, try to allocate more HugePages.

        :param node: Node in the topology.
        :param huge_mnt: HugePage mount point.
        :param mem_size: Requested memory in MB.
        :param allocate: Whether to allocate more memory if not enough.
        :type node: dict
        :type huge_mnt: str
        :type mem_size: str
        :type allocate: bool
        :raises RuntimeError: Mounting hugetlbfs failed or not enough HugePages
            or increasing map count failed.
        """
        # TODO: split function into smaller parts.
        ssh = SSH()
        ssh.connect(node)

        # Get huge pages information
        huge_size = DUTSetup.get_huge_page_size(node)
        huge_free = DUTSetup.get_huge_page_free(node, huge_size)
        huge_total = DUTSetup.get_huge_page_total(node, huge_size)

        # Check if memory requested is available on
        mem_size = int(mem_size)
        if (mem_size * 1024) > (huge_free * huge_size):
            # If we want to allocate hugepage dynamically
            if allocate:
                mem_needed = (mem_size * 1024) - (huge_free * huge_size)
                huge_to_allocate = ((mem_needed / huge_size) * 2) + huge_total
                max_map_count = huge_to_allocate*4
                # Increase maximum number of memory map areas a process may have
                ret_code, _, _ = ssh.exec_command_sudo(
                    f"echo \"{max_map_count}\" | "
                    f"sudo tee /proc/sys/vm/max_map_count"
                )
                if int(ret_code) != 0:
                    raise RuntimeError(
                        f"Increase map count failed on {node[u'host']}"
                    )
                # Increase hugepage count
                ret_code, _, _ = ssh.exec_command_sudo(
                    f"echo \"{huge_to_allocate}\" | "
                    f"sudo tee /proc/sys/vm/nr_hugepages"
                )
                if int(ret_code) != 0:
                    raise RuntimeError(
                        f"Mount huge pages failed on {node[u'host']}"
                    )
            # If we do not want to allocate dynamically end with error
            else:
                raise RuntimeError(
                    f"Not enough free huge pages: {huge_free}, "
                    f"{huge_free * huge_size} MB"
                )
        # Check if huge pages mount point exist
        has_huge_mnt = False
        ret_code, stdout, _ = ssh.exec_command(u"cat /proc/mounts")
        if int(ret_code) == 0:
            for line in stdout.splitlines():
                # Try to find something like:
                # none /mnt/huge hugetlbfs rw,realtime,pagesize=2048k 0 0
                mount = line.split()
                if mount[2] == u"hugetlbfs" and mount[1] == huge_mnt:
                    has_huge_mnt = True
                    break
        # If huge page mount point not exist create one
        if not has_huge_mnt:
            ret_code, _, _ = ssh.exec_command_sudo(f"mkdir -p {huge_mnt}")
            if int(ret_code) != 0:
                raise RuntimeError(
                    f"Create mount dir failed on {node[u'host']}"
                )
            ret_code, _, _ = ssh.exec_command_sudo(
                f"mount -t hugetlbfs -o pagesize=2048k none {huge_mnt}"
            )
            if int(ret_code) != 0:
                raise RuntimeError(
                    f"Mount huge pages failed on {node[u'host']}"
                )