diff options
Diffstat (limited to 'doc/guides/nics/enic.rst')
| -rw-r--r-- | doc/guides/nics/enic.rst | 13 |
1 files changed, 10 insertions, 3 deletions
diff --git a/doc/guides/nics/enic.rst b/doc/guides/nics/enic.rst index bc38f51a..c1b83b9b 100644 --- a/doc/guides/nics/enic.rst +++ b/doc/guides/nics/enic.rst @@ -224,7 +224,7 @@ the use of SR-IOV. passthrough devices do not require libvirt, port profiles, and VM-FEX. -.. _enic-genic-flow-api: +.. _enic-generic-flow-api: Generic Flow API support ------------------------ @@ -247,7 +247,7 @@ Generic Flow API is supported. The baseline support is: in the pattern. - Attributes: ingress - - Items: eth, ipv4, ipv6, udp, tcp, vxlan, inner eth, ipv4, ipv6, udp, tcp + - Items: eth, vlan, ipv4, ipv6, udp, tcp, vxlan, inner eth, vlan, ipv4, ipv6, udp, tcp - Actions: queue and void - Selectors: 'is', 'spec' and 'mask'. 'last' is not supported - In total, up to 64 bytes of mask is allowed across all headers @@ -255,7 +255,7 @@ Generic Flow API is supported. The baseline support is: - **1300 and later series VICS with advanced filters enabled** - Attributes: ingress - - Items: eth, ipv4, ipv6, udp, tcp, vxlan, inner eth, ipv4, ipv6, udp, tcp + - Items: eth, vlan, ipv4, ipv6, udp, tcp, vxlan, inner eth, vlan, ipv4, ipv6, udp, tcp - Actions: queue, mark, drop, flag and void - Selectors: 'is', 'spec' and 'mask'. 'last' is not supported - In total, up to 64 bytes of mask is allowed across all headers @@ -266,6 +266,12 @@ Generic Flow API is supported. The baseline support is: - Action: count +The VIC performs packet matching after applying VLAN strip. If VLAN +stripping is enabled, EtherType in the ETH item corresponds to the +stripped VLAN header's EtherType. Stripping does not affect the VLAN +item. TCI and EtherType in the VLAN item are matched against those in +the (stripped) VLAN header whether stripping is enabled or disabled. + More features may be added in future firmware and new versions of the VIC. Please refer to the release notes. @@ -450,6 +456,7 @@ PKT_RX_VLAN_STRIPPED mbuf flags would not be set. This mode is enabled with the 1000 for 1300 series VICs). Filters are checked for matching in the order they were added. Since there currently is no grouping or priority support, 'catch-all' filters should be added last. + - The supported range of IDs for the 'MARK' action is 0 - 0xFFFD. - **Statistics** |