summaryrefslogtreecommitdiffstats
path: root/drivers/crypto/virtio/virtio_pci.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/crypto/virtio/virtio_pci.h')
-rw-r--r--drivers/crypto/virtio/virtio_pci.h253
1 files changed, 253 insertions, 0 deletions
diff --git a/drivers/crypto/virtio/virtio_pci.h b/drivers/crypto/virtio/virtio_pci.h
new file mode 100644
index 00000000..604ec366
--- /dev/null
+++ b/drivers/crypto/virtio/virtio_pci.h
@@ -0,0 +1,253 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018 HUAWEI TECHNOLOGIES CO., LTD.
+ */
+
+#ifndef _VIRTIO_PCI_H_
+#define _VIRTIO_PCI_H_
+
+#include <stdint.h>
+
+#include <rte_pci.h>
+#include <rte_bus_pci.h>
+#include <rte_cryptodev.h>
+
+#include "virtio_crypto.h"
+
+struct virtqueue;
+
+/* VirtIO PCI vendor/device ID. */
+#define VIRTIO_CRYPTO_PCI_VENDORID 0x1AF4
+#define VIRTIO_CRYPTO_PCI_DEVICEID 0x1054
+
+/* VirtIO ABI version, this must match exactly. */
+#define VIRTIO_PCI_ABI_VERSION 0
+
+/*
+ * VirtIO Header, located in BAR 0.
+ */
+#define VIRTIO_PCI_HOST_FEATURES 0 /* host's supported features (32bit, RO)*/
+#define VIRTIO_PCI_GUEST_FEATURES 4 /* guest's supported features (32, RW) */
+#define VIRTIO_PCI_QUEUE_PFN 8 /* physical address of VQ (32, RW) */
+#define VIRTIO_PCI_QUEUE_NUM 12 /* number of ring entries (16, RO) */
+#define VIRTIO_PCI_QUEUE_SEL 14 /* current VQ selection (16, RW) */
+#define VIRTIO_PCI_QUEUE_NOTIFY 16 /* notify host regarding VQ (16, RW) */
+#define VIRTIO_PCI_STATUS 18 /* device status register (8, RW) */
+#define VIRTIO_PCI_ISR 19 /* interrupt status register, reading
+ * also clears the register (8, RO)
+ */
+/* Only if MSIX is enabled: */
+
+/* configuration change vector (16, RW) */
+#define VIRTIO_MSI_CONFIG_VECTOR 20
+/* vector for selected VQ notifications */
+#define VIRTIO_MSI_QUEUE_VECTOR 22
+
+/* The bit of the ISR which indicates a device has an interrupt. */
+#define VIRTIO_PCI_ISR_INTR 0x1
+/* The bit of the ISR which indicates a device configuration change. */
+#define VIRTIO_PCI_ISR_CONFIG 0x2
+/* Vector value used to disable MSI for queue. */
+#define VIRTIO_MSI_NO_VECTOR 0xFFFF
+
+/* Status byte for guest to report progress. */
+#define VIRTIO_CONFIG_STATUS_RESET 0x00
+#define VIRTIO_CONFIG_STATUS_ACK 0x01
+#define VIRTIO_CONFIG_STATUS_DRIVER 0x02
+#define VIRTIO_CONFIG_STATUS_DRIVER_OK 0x04
+#define VIRTIO_CONFIG_STATUS_FEATURES_OK 0x08
+#define VIRTIO_CONFIG_STATUS_FAILED 0x80
+
+/*
+ * Each virtqueue indirect descriptor list must be physically contiguous.
+ * To allow us to malloc(9) each list individually, limit the number
+ * supported to what will fit in one page. With 4KB pages, this is a limit
+ * of 256 descriptors. If there is ever a need for more, we can switch to
+ * contigmalloc(9) for the larger allocations, similar to what
+ * bus_dmamem_alloc(9) does.
+ *
+ * Note the sizeof(struct vring_desc) is 16 bytes.
+ */
+#define VIRTIO_MAX_INDIRECT ((int) (PAGE_SIZE / 16))
+
+/* Do we get callbacks when the ring is completely used, even if we've
+ * suppressed them?
+ */
+#define VIRTIO_F_NOTIFY_ON_EMPTY 24
+
+/* Can the device handle any descriptor layout? */
+#define VIRTIO_F_ANY_LAYOUT 27
+
+/* We support indirect buffer descriptors */
+#define VIRTIO_RING_F_INDIRECT_DESC 28
+
+#define VIRTIO_F_VERSION_1 32
+#define VIRTIO_F_IOMMU_PLATFORM 33
+
+/* The Guest publishes the used index for which it expects an interrupt
+ * at the end of the avail ring. Host should ignore the avail->flags field.
+ */
+/* The Host publishes the avail index for which it expects a kick
+ * at the end of the used ring. Guest should ignore the used->flags field.
+ */
+#define VIRTIO_RING_F_EVENT_IDX 29
+
+/* Common configuration */
+#define VIRTIO_PCI_CAP_COMMON_CFG 1
+/* Notifications */
+#define VIRTIO_PCI_CAP_NOTIFY_CFG 2
+/* ISR Status */
+#define VIRTIO_PCI_CAP_ISR_CFG 3
+/* Device specific configuration */
+#define VIRTIO_PCI_CAP_DEVICE_CFG 4
+/* PCI configuration access */
+#define VIRTIO_PCI_CAP_PCI_CFG 5
+
+/* This is the PCI capability header: */
+struct virtio_pci_cap {
+ uint8_t cap_vndr; /* Generic PCI field: PCI_CAP_ID_VNDR */
+ uint8_t cap_next; /* Generic PCI field: next ptr. */
+ uint8_t cap_len; /* Generic PCI field: capability length */
+ uint8_t cfg_type; /* Identifies the structure. */
+ uint8_t bar; /* Where to find it. */
+ uint8_t padding[3]; /* Pad to full dword. */
+ uint32_t offset; /* Offset within bar. */
+ uint32_t length; /* Length of the structure, in bytes. */
+};
+
+struct virtio_pci_notify_cap {
+ struct virtio_pci_cap cap;
+ uint32_t notify_off_multiplier; /* Multiplier for queue_notify_off. */
+};
+
+/* Fields in VIRTIO_PCI_CAP_COMMON_CFG: */
+struct virtio_pci_common_cfg {
+ /* About the whole device. */
+ uint32_t device_feature_select; /* read-write */
+ uint32_t device_feature; /* read-only */
+ uint32_t guest_feature_select; /* read-write */
+ uint32_t guest_feature; /* read-write */
+ uint16_t msix_config; /* read-write */
+ uint16_t num_queues; /* read-only */
+ uint8_t device_status; /* read-write */
+ uint8_t config_generation; /* read-only */
+
+ /* About a specific virtqueue. */
+ uint16_t queue_select; /* read-write */
+ uint16_t queue_size; /* read-write, power of 2. */
+ uint16_t queue_msix_vector; /* read-write */
+ uint16_t queue_enable; /* read-write */
+ uint16_t queue_notify_off; /* read-only */
+ uint32_t queue_desc_lo; /* read-write */
+ uint32_t queue_desc_hi; /* read-write */
+ uint32_t queue_avail_lo; /* read-write */
+ uint32_t queue_avail_hi; /* read-write */
+ uint32_t queue_used_lo; /* read-write */
+ uint32_t queue_used_hi; /* read-write */
+};
+
+struct virtio_crypto_hw;
+
+struct virtio_pci_ops {
+ void (*read_dev_cfg)(struct virtio_crypto_hw *hw, size_t offset,
+ void *dst, int len);
+ void (*write_dev_cfg)(struct virtio_crypto_hw *hw, size_t offset,
+ const void *src, int len);
+ void (*reset)(struct virtio_crypto_hw *hw);
+
+ uint8_t (*get_status)(struct virtio_crypto_hw *hw);
+ void (*set_status)(struct virtio_crypto_hw *hw, uint8_t status);
+
+ uint64_t (*get_features)(struct virtio_crypto_hw *hw);
+ void (*set_features)(struct virtio_crypto_hw *hw, uint64_t features);
+
+ uint8_t (*get_isr)(struct virtio_crypto_hw *hw);
+
+ uint16_t (*set_config_irq)(struct virtio_crypto_hw *hw, uint16_t vec);
+
+ uint16_t (*set_queue_irq)(struct virtio_crypto_hw *hw,
+ struct virtqueue *vq, uint16_t vec);
+
+ uint16_t (*get_queue_num)(struct virtio_crypto_hw *hw,
+ uint16_t queue_id);
+ int (*setup_queue)(struct virtio_crypto_hw *hw, struct virtqueue *vq);
+ void (*del_queue)(struct virtio_crypto_hw *hw, struct virtqueue *vq);
+ void (*notify_queue)(struct virtio_crypto_hw *hw, struct virtqueue *vq);
+};
+
+struct virtio_crypto_hw {
+ /* control queue */
+ struct virtqueue *cvq;
+ uint16_t dev_id;
+ uint16_t max_dataqueues;
+ uint64_t req_guest_features;
+ uint64_t guest_features;
+ uint8_t use_msix;
+ uint8_t modern;
+ uint32_t notify_off_multiplier;
+ uint8_t *isr;
+ uint16_t *notify_base;
+ struct virtio_pci_common_cfg *common_cfg;
+ struct virtio_crypto_config *dev_cfg;
+ const struct rte_cryptodev_capabilities *virtio_dev_capabilities;
+};
+
+/*
+ * While virtio_crypto_hw is stored in shared memory, this structure stores
+ * some infos that may vary in the multiple process model locally.
+ * For example, the vtpci_ops pointer.
+ */
+struct virtio_hw_internal {
+ const struct virtio_pci_ops *vtpci_ops;
+ struct rte_pci_ioport io;
+};
+
+#define VTPCI_OPS(hw) (virtio_hw_internal[(hw)->dev_id].vtpci_ops)
+#define VTPCI_IO(hw) (&virtio_hw_internal[(hw)->dev_id].io)
+
+extern struct virtio_hw_internal virtio_hw_internal[RTE_MAX_VIRTIO_CRYPTO];
+
+/*
+ * How many bits to shift physical queue address written to QUEUE_PFN.
+ * 12 is historical, and due to x86 page size.
+ */
+#define VIRTIO_PCI_QUEUE_ADDR_SHIFT 12
+
+/* The alignment to use between consumer and producer parts of vring. */
+#define VIRTIO_PCI_VRING_ALIGN 4096
+
+enum virtio_msix_status {
+ VIRTIO_MSIX_NONE = 0,
+ VIRTIO_MSIX_DISABLED = 1,
+ VIRTIO_MSIX_ENABLED = 2
+};
+
+static inline int
+vtpci_with_feature(struct virtio_crypto_hw *hw, uint64_t bit)
+{
+ return (hw->guest_features & (1ULL << bit)) != 0;
+}
+
+/*
+ * Function declaration from virtio_pci.c
+ */
+int vtpci_cryptodev_init(struct rte_pci_device *dev,
+ struct virtio_crypto_hw *hw);
+void vtpci_cryptodev_reset(struct virtio_crypto_hw *hw);
+
+void vtpci_cryptodev_reinit_complete(struct virtio_crypto_hw *hw);
+
+uint8_t vtpci_cryptodev_get_status(struct virtio_crypto_hw *hw);
+void vtpci_cryptodev_set_status(struct virtio_crypto_hw *hw, uint8_t status);
+
+uint64_t vtpci_cryptodev_negotiate_features(struct virtio_crypto_hw *hw,
+ uint64_t host_features);
+
+void vtpci_write_cryptodev_config(struct virtio_crypto_hw *hw, size_t offset,
+ const void *src, int length);
+
+void vtpci_read_cryptodev_config(struct virtio_crypto_hw *hw, size_t offset,
+ void *dst, int length);
+
+uint8_t vtpci_cryptodev_isr(struct virtio_crypto_hw *hw);
+
+#endif /* _VIRTIO_PCI_H_ */