diff options
Diffstat (limited to 'drivers/net/bnx2x/elink.c')
| -rw-r--r-- | drivers/net/bnx2x/elink.c | 761 |
1 files changed, 390 insertions, 371 deletions
diff --git a/drivers/net/bnx2x/elink.c b/drivers/net/bnx2x/elink.c index 74e1bead..0ba25494 100644 --- a/drivers/net/bnx2x/elink.c +++ b/drivers/net/bnx2x/elink.c @@ -944,7 +944,7 @@ static int elink_check_lfa(struct elink_params *params) * to verify DCC bit is cleared in any case! */ if (additional_config & NO_LFA_DUE_TO_DCC_MASK) { - PMD_DRV_LOG(DEBUG, "No LFA due to DCC flap after clp exit"); + PMD_DRV_LOG(DEBUG, sc, "No LFA due to DCC flap after clp exit"); REG_WR(sc, params->lfa_base + offsetof(struct shmem_lfa, additional_config), additional_config & ~NO_LFA_DUE_TO_DCC_MASK); @@ -985,7 +985,7 @@ static int elink_check_lfa(struct elink_params *params) offsetof(struct shmem_lfa, req_duplex)); req_val = params->req_duplex[0] | (params->req_duplex[1] << 16); if ((saved_val & lfa_mask) != (req_val & lfa_mask)) { - PMD_DRV_LOG(INFO, "Duplex mismatch %x vs. %x", + PMD_DRV_LOG(INFO, sc, "Duplex mismatch %x vs. %x", (saved_val & lfa_mask), (req_val & lfa_mask)); return LFA_DUPLEX_MISMATCH; } @@ -994,7 +994,7 @@ static int elink_check_lfa(struct elink_params *params) offsetof(struct shmem_lfa, req_flow_ctrl)); req_val = params->req_flow_ctrl[0] | (params->req_flow_ctrl[1] << 16); if ((saved_val & lfa_mask) != (req_val & lfa_mask)) { - PMD_DRV_LOG(DEBUG, "Flow control mismatch %x vs. %x", + PMD_DRV_LOG(DEBUG, sc, "Flow control mismatch %x vs. %x", (saved_val & lfa_mask), (req_val & lfa_mask)); return LFA_FLOW_CTRL_MISMATCH; } @@ -1003,7 +1003,7 @@ static int elink_check_lfa(struct elink_params *params) offsetof(struct shmem_lfa, req_line_speed)); req_val = params->req_line_speed[0] | (params->req_line_speed[1] << 16); if ((saved_val & lfa_mask) != (req_val & lfa_mask)) { - PMD_DRV_LOG(DEBUG, "Link speed mismatch %x vs. %x", + PMD_DRV_LOG(DEBUG, sc, "Link speed mismatch %x vs. %x", (saved_val & lfa_mask), (req_val & lfa_mask)); return LFA_LINK_SPEED_MISMATCH; } @@ -1014,7 +1014,7 @@ static int elink_check_lfa(struct elink_params *params) speed_cap_mask[cfg_idx])); if (cur_speed_cap_mask != params->speed_cap_mask[cfg_idx]) { - PMD_DRV_LOG(DEBUG, "Speed Cap mismatch %x vs. %x", + PMD_DRV_LOG(DEBUG, sc, "Speed Cap mismatch %x vs. %x", cur_speed_cap_mask, params->speed_cap_mask[cfg_idx]); return LFA_SPEED_CAP_MISMATCH; @@ -1027,7 +1027,7 @@ static int elink_check_lfa(struct elink_params *params) REQ_FC_AUTO_ADV_MASK; if ((uint16_t) cur_req_fc_auto_adv != params->req_fc_auto_adv) { - PMD_DRV_LOG(DEBUG, "Flow Ctrl AN mismatch %x vs. %x", + PMD_DRV_LOG(DEBUG, sc, "Flow Ctrl AN mismatch %x vs. %x", cur_req_fc_auto_adv, params->req_fc_auto_adv); return LFA_FLOW_CTRL_MISMATCH; } @@ -1040,7 +1040,8 @@ static int elink_check_lfa(struct elink_params *params) (params->eee_mode & ELINK_EEE_MODE_ENABLE_LPI)) || ((eee_status & SHMEM_EEE_REQUESTED_BIT) ^ (params->eee_mode & ELINK_EEE_MODE_ADV_LPI))) { - PMD_DRV_LOG(DEBUG, "EEE mismatch %x vs. %x", params->eee_mode, + PMD_DRV_LOG(DEBUG, sc, + "EEE mismatch %x vs. %x", params->eee_mode, eee_status); return LFA_EEE_MISMATCH; } @@ -1059,7 +1060,7 @@ static void elink_get_epio(struct bnx2x_softc *sc, uint32_t epio_pin, *en = 0; /* Sanity check */ if (epio_pin > 31) { - PMD_DRV_LOG(DEBUG, "Invalid EPIO pin %d to get", epio_pin); + PMD_DRV_LOG(DEBUG, sc, "Invalid EPIO pin %d to get", epio_pin); return; } @@ -1077,10 +1078,10 @@ static void elink_set_epio(struct bnx2x_softc *sc, uint32_t epio_pin, uint32_t e /* Sanity check */ if (epio_pin > 31) { - PMD_DRV_LOG(DEBUG, "Invalid EPIO pin %d to set", epio_pin); + PMD_DRV_LOG(DEBUG, sc, "Invalid EPIO pin %d to set", epio_pin); return; } - PMD_DRV_LOG(DEBUG, "Setting EPIO pin %d to %d", epio_pin, en); + PMD_DRV_LOG(DEBUG, sc, "Setting EPIO pin %d to %d", epio_pin, en); epio_mask = 1 << epio_pin; /* Set this EPIO to output */ gp_output = REG_RD(sc, MCP_REG_MCPR_GP_OUTPUTS); @@ -1211,7 +1212,7 @@ static void elink_set_mdio_clk(struct bnx2x_softc *sc, uint32_t emac_base) new_mode |= clc_cnt; new_mode |= (EMAC_MDIO_MODE_CLAUSE_45); - PMD_DRV_LOG(DEBUG, "Changing emac_mode from 0x%x to 0x%x", + PMD_DRV_LOG(DEBUG, sc, "Changing emac_mode from 0x%x to 0x%x", cur_mode, new_mode); REG_WR(sc, emac_base + EMAC_REG_EMAC_MDIO_MODE, new_mode); DELAY(40); @@ -1264,9 +1265,9 @@ static void elink_emac_init(struct elink_params *params) timeout = 200; do { val = REG_RD(sc, emac_base + EMAC_REG_EMAC_MODE); - PMD_DRV_LOG(DEBUG, "EMAC reset reg is %u", val); + PMD_DRV_LOG(DEBUG, sc, "EMAC reset reg is %u", val); if (!timeout) { - PMD_DRV_LOG(DEBUG, "EMAC timeout!"); + PMD_DRV_LOG(DEBUG, sc, "EMAC timeout!"); return; } timeout--; @@ -1329,7 +1330,7 @@ static void elink_umac_enable(struct elink_params *params, REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, (MISC_REGISTERS_RESET_REG_2_UMAC0 << params->port)); - PMD_DRV_LOG(DEBUG, "enabling UMAC"); + PMD_DRV_LOG(DEBUG, sc, "enabling UMAC"); /* This register opens the gate for the UMAC despite its name */ REG_WR(sc, NIG_REG_EGRESS_EMAC0_PORT + params->port * 4, 1); @@ -1352,7 +1353,7 @@ static void elink_umac_enable(struct elink_params *params, val |= (3 << 2); break; default: - PMD_DRV_LOG(DEBUG, "Invalid speed for UMAC %d", + PMD_DRV_LOG(DEBUG, sc, "Invalid speed for UMAC %d", vars->line_speed); break; } @@ -1370,7 +1371,7 @@ static void elink_umac_enable(struct elink_params *params, /* Configure UMAC for EEE */ if (vars->eee_status & SHMEM_EEE_ADV_STATUS_MASK) { - PMD_DRV_LOG(DEBUG, "configured UMAC for EEE"); + PMD_DRV_LOG(DEBUG, sc, "configured UMAC for EEE"); REG_WR(sc, umac_base + UMAC_REG_UMAC_EEE_CTRL, UMAC_UMAC_EEE_CTRL_REG_EEE_EN); REG_WR(sc, umac_base + UMAC_REG_EEE_WAKE_TIMER, 0x11); @@ -1428,7 +1429,7 @@ static void elink_xmac_init(struct elink_params *params, uint32_t max_speed) is_port4mode && (REG_RD(sc, MISC_REG_RESET_REG_2) & MISC_REGISTERS_RESET_REG_2_XMAC)) { - PMD_DRV_LOG(DEBUG, "XMAC already out of reset in 4-port mode"); + PMD_DRV_LOG(DEBUG, sc, "XMAC already out of reset in 4-port mode"); return; } @@ -1440,7 +1441,7 @@ static void elink_xmac_init(struct elink_params *params, uint32_t max_speed) REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, MISC_REGISTERS_RESET_REG_2_XMAC); if (is_port4mode) { - PMD_DRV_LOG(DEBUG, "Init XMAC to 2 ports x 10G per path"); + PMD_DRV_LOG(DEBUG, sc, "Init XMAC to 2 ports x 10G per path"); /* Set the number of ports on the system side to up to 2 */ REG_WR(sc, MISC_REG_XMAC_CORE_PORT_MODE, 1); @@ -1451,12 +1452,12 @@ static void elink_xmac_init(struct elink_params *params, uint32_t max_speed) /* Set the number of ports on the system side to 1 */ REG_WR(sc, MISC_REG_XMAC_CORE_PORT_MODE, 0); if (max_speed == ELINK_SPEED_10000) { - PMD_DRV_LOG(DEBUG, + PMD_DRV_LOG(DEBUG, sc, "Init XMAC to 10G x 1 port per path"); /* Set the number of ports on the Warp Core to 10G */ REG_WR(sc, MISC_REG_XMAC_PHY_PORT_MODE, 3); } else { - PMD_DRV_LOG(DEBUG, + PMD_DRV_LOG(DEBUG, sc, "Init XMAC to 20G x 2 ports per path"); /* Set the number of ports on the Warp Core to 20G */ REG_WR(sc, MISC_REG_XMAC_PHY_PORT_MODE, 1); @@ -1489,7 +1490,7 @@ static void elink_set_xmac_rxtx(struct elink_params *params, uint8_t en) (pfc_ctrl & ~(1 << 1))); REG_WR(sc, xmac_base + XMAC_REG_PFC_CTRL_HI, (pfc_ctrl | (1 << 1))); - PMD_DRV_LOG(DEBUG, "Disable XMAC on port %x", port); + PMD_DRV_LOG(DEBUG, sc, "Disable XMAC on port %x", port); val = REG_RD(sc, xmac_base + XMAC_REG_CTRL); if (en) val |= (XMAC_CTRL_REG_TX_EN | XMAC_CTRL_REG_RX_EN); @@ -1504,7 +1505,7 @@ static elink_status_t elink_xmac_enable(struct elink_params *params, { uint32_t val, xmac_base; struct bnx2x_softc *sc = params->sc; - PMD_DRV_LOG(DEBUG, "enabling XMAC"); + PMD_DRV_LOG(DEBUG, sc, "enabling XMAC"); xmac_base = (params->port) ? GRCBASE_XMAC1 : GRCBASE_XMAC0; @@ -1541,7 +1542,7 @@ static elink_status_t elink_xmac_enable(struct elink_params *params, elink_update_pfc_xmac(params, vars); if (vars->eee_status & SHMEM_EEE_ADV_STATUS_MASK) { - PMD_DRV_LOG(DEBUG, "Setting XMAC for EEE"); + PMD_DRV_LOG(DEBUG, sc, "Setting XMAC for EEE"); REG_WR(sc, xmac_base + XMAC_REG_EEE_TIMERS_HI, 0x1380008); REG_WR(sc, xmac_base + XMAC_REG_EEE_CTRL, 0x1); } else { @@ -1577,7 +1578,7 @@ static elink_status_t elink_emac_enable(struct elink_params *params, uint32_t emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0; uint32_t val; - PMD_DRV_LOG(DEBUG, "enabling EMAC"); + PMD_DRV_LOG(DEBUG, sc, "enabling EMAC"); /* Disable BMAC */ REG_WR(sc, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, @@ -1591,14 +1592,14 @@ static elink_status_t elink_emac_enable(struct elink_params *params, PORT_HW_CFG_LANE_SWAP_CFG_MASTER_MASK) >> PORT_HW_CFG_LANE_SWAP_CFG_MASTER_SHIFT); - PMD_DRV_LOG(DEBUG, "XGXS"); + PMD_DRV_LOG(DEBUG, sc, "XGXS"); /* select the master lanes (out of 0-3) */ REG_WR(sc, NIG_REG_XGXS_LANE_SEL_P0 + port * 4, ser_lane); /* select XGXS */ REG_WR(sc, NIG_REG_XGXS_SERDES0_MODE_SEL + port * 4, 1); } else { /* SerDes */ - PMD_DRV_LOG(DEBUG, "SerDes"); + PMD_DRV_LOG(DEBUG, sc, "SerDes"); /* select SerDes */ REG_WR(sc, NIG_REG_XGXS_SERDES0_MODE_SEL + port * 4, 0); } @@ -1644,7 +1645,7 @@ static elink_status_t elink_emac_enable(struct elink_params *params, */ elink_cb_reg_write(sc, emac_base + EMAC_REG_RX_PFC_MODE, 0); if (params->feature_config_flags & ELINK_FEATURE_CONFIG_PFC_ENABLED) { - PMD_DRV_LOG(DEBUG, "PFC is enabled"); + PMD_DRV_LOG(DEBUG, sc, "PFC is enabled"); /* Enable PFC again */ elink_cb_reg_write(sc, emac_base + EMAC_REG_RX_PFC_MODE, EMAC_REG_RX_PFC_MODE_RX_EN | @@ -1764,7 +1765,7 @@ static void elink_update_pfc_bmac2(struct elink_params *params, REG_WR_DMAE(sc, bmac_addr + BIGMAC2_REGISTER_TX_CONTROL, wb_data, 2); if (params->feature_config_flags & ELINK_FEATURE_CONFIG_PFC_ENABLED) { - PMD_DRV_LOG(DEBUG, "PFC is enabled"); + PMD_DRV_LOG(DEBUG, sc, "PFC is enabled"); /* Enable PFC RX & TX & STATS and set 8 COS */ wb_data[0] = 0x0; wb_data[0] |= (1 << 0); /* RX */ @@ -1778,7 +1779,7 @@ static void elink_update_pfc_bmac2(struct elink_params *params, /* Clear the force Xon */ wb_data[0] &= ~(1 << 2); } else { - PMD_DRV_LOG(DEBUG, "PFC is disabled"); + PMD_DRV_LOG(DEBUG, sc, "PFC is disabled"); /* Disable PFC RX & TX & STATS and set 8 COS */ wb_data[0] = 0x8; wb_data[1] = 0; @@ -1804,7 +1805,7 @@ static void elink_update_pfc_bmac2(struct elink_params *params, val = 0x3; /* Enable RX and TX */ if (is_lb) { val |= 0x4; /* Local loopback */ - PMD_DRV_LOG(DEBUG, "enable bmac loopback"); + PMD_DRV_LOG(DEBUG, sc, "enable bmac loopback"); } /* When PFC enabled, Pass pause frames towards the NIG. */ if (params->feature_config_flags & ELINK_FEATURE_CONFIG_PFC_ENABLED) @@ -1898,7 +1899,7 @@ static void elink_update_pfc_nig(struct elink_params *params, int set_pfc = params->feature_config_flags & ELINK_FEATURE_CONFIG_PFC_ENABLED; - PMD_DRV_LOG(DEBUG, "updating pfc nig parameters"); + PMD_DRV_LOG(DEBUG, sc, "updating pfc nig parameters"); /* When NIG_LLH0_XCM_MASK_REG_LLHX_XCM_MASK_BCN bit is set * MAC control frames (that are not pause packets) @@ -2010,7 +2011,7 @@ elink_status_t elink_update_pfc(struct elink_params *params, if (!vars->link_up) return elink_status; - PMD_DRV_LOG(DEBUG, "About to update PFC in BMAC"); + PMD_DRV_LOG(DEBUG, sc, "About to update PFC in BMAC"); if (CHIP_IS_E3(sc)) { if (vars->mac_type == ELINK_MAC_TYPE_XMAC) @@ -2020,7 +2021,7 @@ elink_status_t elink_update_pfc(struct elink_params *params, if ((val & (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << params->port)) == 0) { - PMD_DRV_LOG(DEBUG, "About to update PFC in EMAC"); + PMD_DRV_LOG(DEBUG, sc, "About to update PFC in EMAC"); elink_emac_enable(params, vars, 0); return elink_status; } @@ -2049,7 +2050,7 @@ static elink_status_t elink_bmac1_enable(struct elink_params *params, uint32_t wb_data[2]; uint32_t val; - PMD_DRV_LOG(DEBUG, "Enabling BigMAC1"); + PMD_DRV_LOG(DEBUG, sc, "Enabling BigMAC1"); /* XGXS control */ wb_data[0] = 0x3c; @@ -2068,7 +2069,7 @@ static elink_status_t elink_bmac1_enable(struct elink_params *params, val = 0x3; if (is_lb) { val |= 0x4; - PMD_DRV_LOG(DEBUG, "enable bmac loopback"); + PMD_DRV_LOG(DEBUG, sc, "enable bmac loopback"); } wb_data[0] = val; wb_data[1] = 0; @@ -2109,7 +2110,7 @@ static elink_status_t elink_bmac2_enable(struct elink_params *params, NIG_REG_INGRESS_BMAC0_MEM; uint32_t wb_data[2]; - PMD_DRV_LOG(DEBUG, "Enabling BigMAC2"); + PMD_DRV_LOG(DEBUG, sc, "Enabling BigMAC2"); wb_data[0] = 0; wb_data[1] = 0; @@ -2247,7 +2248,7 @@ static elink_status_t elink_pbf_update(struct elink_params *params, /* Wait for init credit */ init_crd = REG_RD(sc, PBF_REG_P0_INIT_CRD + port * 4); crd = REG_RD(sc, PBF_REG_P0_CREDIT + port * 8); - PMD_DRV_LOG(DEBUG, "init_crd 0x%x crd 0x%x", init_crd, crd); + PMD_DRV_LOG(DEBUG, sc, "init_crd 0x%x crd 0x%x", init_crd, crd); while ((init_crd != crd) && count) { DELAY(1000 * 5); @@ -2256,7 +2257,7 @@ static elink_status_t elink_pbf_update(struct elink_params *params, } crd = REG_RD(sc, PBF_REG_P0_CREDIT + port * 8); if (init_crd != crd) { - PMD_DRV_LOG(DEBUG, "BUG! init_crd 0x%x != crd 0x%x", + PMD_DRV_LOG(DEBUG, sc, "BUG! init_crd 0x%x != crd 0x%x", init_crd, crd); return ELINK_STATUS_ERROR; } @@ -2283,13 +2284,13 @@ static elink_status_t elink_pbf_update(struct elink_params *params, init_crd = thresh + 553 - 22; break; default: - PMD_DRV_LOG(DEBUG, "Invalid line_speed 0x%x", + PMD_DRV_LOG(DEBUG, sc, "Invalid line_speed 0x%x", line_speed); return ELINK_STATUS_ERROR; } } REG_WR(sc, PBF_REG_P0_INIT_CRD + port * 4, init_crd); - PMD_DRV_LOG(DEBUG, "PBF updated to speed %d credit %d", + PMD_DRV_LOG(DEBUG, sc, "PBF updated to speed %d credit %d", line_speed, init_crd); /* Probe the credit changes */ @@ -2379,7 +2380,7 @@ static elink_status_t elink_cl22_write(struct bnx2x_softc *sc, } } if (tmp & EMAC_MDIO_COMM_START_BUSY) { - PMD_DRV_LOG(DEBUG, "write phy register failed"); + PMD_DRV_LOG(DEBUG, sc, "write phy register failed"); rc = ELINK_STATUS_TIMEOUT; } REG_WR(sc, phy->mdio_ctrl + EMAC_REG_EMAC_MDIO_MODE, mode); @@ -2415,7 +2416,7 @@ static elink_status_t elink_cl22_read(struct bnx2x_softc *sc, } } if (val & EMAC_MDIO_COMM_START_BUSY) { - PMD_DRV_LOG(DEBUG, "read phy register failed"); + PMD_DRV_LOG(DEBUG, sc, "read phy register failed"); *ret_val = 0; rc = ELINK_STATUS_TIMEOUT; @@ -2456,7 +2457,7 @@ static elink_status_t elink_cl45_read(struct bnx2x_softc *sc, } } if (val & EMAC_MDIO_COMM_START_BUSY) { - PMD_DRV_LOG(DEBUG, "read phy register failed"); + PMD_DRV_LOG(DEBUG, sc, "read phy register failed"); elink_cb_event_log(sc, ELINK_LOG_ID_MDIO_ACCESS_TIMEOUT); // "MDC/MDIO access timeout" *ret_val = 0; @@ -2480,7 +2481,7 @@ static elink_status_t elink_cl45_read(struct bnx2x_softc *sc, } } if (val & EMAC_MDIO_COMM_START_BUSY) { - PMD_DRV_LOG(DEBUG, "read phy register failed"); + PMD_DRV_LOG(DEBUG, sc, "read phy register failed"); elink_cb_event_log(sc, ELINK_LOG_ID_MDIO_ACCESS_TIMEOUT); // "MDC/MDIO access timeout" *ret_val = 0; @@ -2532,7 +2533,7 @@ static elink_status_t elink_cl45_write(struct bnx2x_softc *sc, } } if (tmp & EMAC_MDIO_COMM_START_BUSY) { - PMD_DRV_LOG(DEBUG, "write phy register failed"); + PMD_DRV_LOG(DEBUG, sc, "write phy register failed"); elink_cb_event_log(sc, ELINK_LOG_ID_MDIO_ACCESS_TIMEOUT); // "MDC/MDIO access timeout" rc = ELINK_STATUS_TIMEOUT; @@ -2554,7 +2555,7 @@ static elink_status_t elink_cl45_write(struct bnx2x_softc *sc, } } if (tmp & EMAC_MDIO_COMM_START_BUSY) { - PMD_DRV_LOG(DEBUG, "write phy register failed"); + PMD_DRV_LOG(DEBUG, sc, "write phy register failed"); elink_cb_event_log(sc, ELINK_LOG_ID_MDIO_ACCESS_TIMEOUT); // "MDC/MDIO access timeout" rc = ELINK_STATUS_TIMEOUT; @@ -2677,7 +2678,7 @@ static elink_status_t elink_eee_set_timers(struct elink_params *params, } else if ((params->eee_mode & ELINK_EEE_MODE_ENABLE_LPI) && (params->eee_mode & ELINK_EEE_MODE_OVERRIDE_NVRAM) && (params->eee_mode & ELINK_EEE_MODE_OUTPUT_TIME)) { - PMD_DRV_LOG(DEBUG, "Error: Tx LPI is enabled with timer 0"); + PMD_DRV_LOG(DEBUG, sc, "Error: Tx LPI is enabled with timer 0"); return ELINK_STATUS_ERROR; } @@ -2744,11 +2745,11 @@ static elink_status_t elink_eee_advertise(struct elink_phy *phy, REG_WR(sc, MISC_REG_CPMU_LP_MASK_EXT_P0 + (params->port << 2), 0xfc20); if (modes & SHMEM_EEE_10G_ADV) { - PMD_DRV_LOG(DEBUG, "Advertise 10GBase-T EEE"); + PMD_DRV_LOG(DEBUG, sc, "Advertise 10GBase-T EEE"); val |= 0x8; } if (modes & SHMEM_EEE_1G_ADV) { - PMD_DRV_LOG(DEBUG, "Advertise 1GBase-T EEE"); + PMD_DRV_LOG(DEBUG, sc, "Advertise 1GBase-T EEE"); val |= 0x4; } @@ -2788,7 +2789,7 @@ static void elink_eee_an_resolve(struct elink_phy *phy, if (adv & 0x2) { if (vars->line_speed == ELINK_SPEED_100) neg = 1; - PMD_DRV_LOG(DEBUG, "EEE negotiated - 100M"); + PMD_DRV_LOG(DEBUG, sc, "EEE negotiated - 100M"); } } if (lp & 0x14) { @@ -2796,7 +2797,7 @@ static void elink_eee_an_resolve(struct elink_phy *phy, if (adv & 0x14) { if (vars->line_speed == ELINK_SPEED_1000) neg = 1; - PMD_DRV_LOG(DEBUG, "EEE negotiated - 1G"); + PMD_DRV_LOG(DEBUG, sc, "EEE negotiated - 1G"); } } if (lp & 0x68) { @@ -2804,7 +2805,7 @@ static void elink_eee_an_resolve(struct elink_phy *phy, if (adv & 0x68) { if (vars->line_speed == ELINK_SPEED_10000) neg = 1; - PMD_DRV_LOG(DEBUG, "EEE negotiated - 10G"); + PMD_DRV_LOG(DEBUG, sc, "EEE negotiated - 10G"); } } @@ -2812,7 +2813,7 @@ static void elink_eee_an_resolve(struct elink_phy *phy, vars->eee_status |= (lp_adv << SHMEM_EEE_LP_ADV_STATUS_SHIFT); if (neg) { - PMD_DRV_LOG(DEBUG, "EEE is active"); + PMD_DRV_LOG(DEBUG, sc, "EEE is active"); vars->eee_status |= SHMEM_EEE_ACTIVE_BIT; } } @@ -2842,7 +2843,7 @@ static void elink_bsc_module_sel(struct elink_params *params) e3_cmn_pin_cfg)); i2c_val[I2C_BSC0] = (sfp_ctrl & PORT_HW_CFG_E3_I2C_MUX0_MASK) > 0; i2c_val[I2C_BSC1] = (sfp_ctrl & PORT_HW_CFG_E3_I2C_MUX1_MASK) > 0; - PMD_DRV_LOG(DEBUG, "Setting BSC switch"); + PMD_DRV_LOG(DEBUG, sc, "Setting BSC switch"); for (idx = 0; idx < I2C_SWITCH_WIDTH; idx++) elink_set_cfg_pin(sc, i2c_pins[idx], i2c_val[idx]); } @@ -2858,7 +2859,7 @@ static elink_status_t elink_bsc_read(struct elink_params *params, elink_status_t rc = ELINK_STATUS_OK; if (xfer_cnt > 16) { - PMD_DRV_LOG(DEBUG, "invalid xfer_cnt %d. Max is 16 bytes", + PMD_DRV_LOG(DEBUG, sc, "invalid xfer_cnt %d. Max is 16 bytes", xfer_cnt); return ELINK_STATUS_ERROR; } @@ -2890,7 +2891,7 @@ static elink_status_t elink_bsc_read(struct elink_params *params, DELAY(10); val = REG_RD(sc, MCP_REG_MCPR_IMC_COMMAND); if (i++ > 1000) { - PMD_DRV_LOG(DEBUG, "wr 0 byte timed out after %d try", + PMD_DRV_LOG(DEBUG, sc, "wr 0 byte timed out after %d try", i); rc = ELINK_STATUS_TIMEOUT; break; @@ -2914,7 +2915,8 @@ static elink_status_t elink_bsc_read(struct elink_params *params, DELAY(10); val = REG_RD(sc, MCP_REG_MCPR_IMC_COMMAND); if (i++ > 1000) { - PMD_DRV_LOG(DEBUG, "rd op timed out after %d try", i); + PMD_DRV_LOG(DEBUG, sc, + "rd op timed out after %d try", i); rc = ELINK_STATUS_TIMEOUT; break; } @@ -3059,7 +3061,7 @@ static void elink_serdes_deassert(struct bnx2x_softc *sc, uint8_t port) { uint32_t val; - PMD_DRV_LOG(DEBUG, "elink_serdes_deassert"); + PMD_DRV_LOG(DEBUG, sc, "elink_serdes_deassert"); val = ELINK_SERDES_RESET_BITS << (port * 16); @@ -3094,7 +3096,7 @@ static void elink_xgxs_deassert(struct elink_params *params) struct bnx2x_softc *sc = params->sc; uint8_t port; uint32_t val; - PMD_DRV_LOG(DEBUG, "elink_xgxs_deassert"); + PMD_DRV_LOG(DEBUG, sc, "elink_xgxs_deassert"); port = params->port; val = ELINK_XGXS_RESET_BITS << (port * 16); @@ -3145,7 +3147,7 @@ static void elink_calc_ieee_aneg_adv(struct elink_phy *phy, *ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE; break; } - PMD_DRV_LOG(DEBUG, "ieee_fc = 0x%x", *ieee_fc); + PMD_DRV_LOG(DEBUG, params->sc, "ieee_fc = 0x%x", *ieee_fc); } static void set_phy_vars(struct elink_params *params, struct elink_vars *vars) @@ -3179,7 +3181,7 @@ static void set_phy_vars(struct elink_params *params, struct elink_vars *vars) ELINK_SPEED_AUTO_NEG) vars->link_status |= LINK_STATUS_AUTO_NEGOTIATE_ENABLED; - PMD_DRV_LOG(DEBUG, "req_flow_ctrl %x, req_line_speed %x," + PMD_DRV_LOG(DEBUG, params->sc, "req_flow_ctrl %x, req_line_speed %x," " speed_cap_mask %x", params->phy[actual_phy_idx].req_flow_ctrl, params->phy[actual_phy_idx].req_line_speed, @@ -3210,7 +3212,7 @@ static void elink_ext_phy_set_pause(struct elink_params *params, MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) { val |= MDIO_AN_REG_ADV_PAUSE_PAUSE; } - PMD_DRV_LOG(DEBUG, "Ext phy AN advertize 0x%x", val); + PMD_DRV_LOG(DEBUG, sc, "Ext phy AN advertize 0x%x", val); elink_cl45_write(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_ADV_PAUSE, val); } @@ -3289,7 +3291,7 @@ static void elink_ext_phy_update_adv_fc(struct elink_phy *phy, } pause_result = (ld_pause & MDIO_AN_REG_ADV_PAUSE_MASK) >> 8; pause_result |= (lp_pause & MDIO_AN_REG_ADV_PAUSE_MASK) >> 10; - PMD_DRV_LOG(DEBUG, "Ext PHY pause result 0x%x", pause_result); + PMD_DRV_LOG(DEBUG, sc, "Ext PHY pause result 0x%x", pause_result); elink_pause_resolve(vars, pause_result); } @@ -3358,7 +3360,7 @@ static void elink_warpcore_enable_AN_KR2(struct elink_phy *phy, {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_LD_BAM_CODE, 0x0157}, {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_LD_UD_CODE, 0x0620} }; - PMD_DRV_LOG(DEBUG, "Enabling 20G-KR2"); + PMD_DRV_LOG(DEBUG, sc, "Enabling 20G-KR2"); elink_cl45_read_or_write(sc, phy, MDIO_WC_DEVAD, MDIO_WC_REG_CL49_USERB0_CTRL, (3 << 6)); @@ -3395,7 +3397,7 @@ static void elink_disable_kr2(struct elink_params *params, {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_LD_BAM_CODE, 0x0002}, {MDIO_WC_DEVAD, MDIO_WC_REG_ETA_CL73_LD_UD_CODE, 0x0000} }; - PMD_DRV_LOG(DEBUG, "Disabling 20G-KR2"); + PMD_DRV_LOG(DEBUG, sc, "Disabling 20G-KR2"); for (i = 0; i < ARRAY_SIZE(reg_set); i++) elink_cl45_write(sc, phy, reg_set[i].devad, reg_set[i].reg, @@ -3411,7 +3413,7 @@ static void elink_warpcore_set_lpi_passthrough(struct elink_phy *phy, { struct bnx2x_softc *sc = params->sc; - PMD_DRV_LOG(DEBUG, "Configure WC for LPI pass through"); + PMD_DRV_LOG(DEBUG, sc, "Configure WC for LPI pass through"); elink_cl45_write(sc, phy, MDIO_WC_DEVAD, MDIO_WC_REG_EEE_COMBO_CONTROL0, 0x7c); elink_cl45_read_or_write(sc, phy, MDIO_WC_DEVAD, @@ -3449,7 +3451,7 @@ static void elink_warpcore_enable_AN_KR(struct elink_phy *phy, {MDIO_PMA_DEVAD, MDIO_WC_REG_PMD_KR_CONTROL, 0x2}, {MDIO_WC_DEVAD, MDIO_WC_REG_CL72_USERB0_CL72_TX_FIR_TAP, 0}, }; - PMD_DRV_LOG(DEBUG, "Enable Auto Negotiation for KR"); + PMD_DRV_LOG(DEBUG, sc, "Enable Auto Negotiation for KR"); /* Set to default registers that may be overridden by 10G force */ for (i = 0; i < ARRAY_SIZE(reg_set); i++) elink_cl45_write(sc, phy, reg_set[i].devad, reg_set[i].reg, @@ -3471,7 +3473,7 @@ static void elink_warpcore_enable_AN_KR(struct elink_phy *phy, /* Enable CL37 1G Parallel Detect */ elink_cl45_read_or_write(sc, phy, MDIO_WC_DEVAD, addr, 0x1); - PMD_DRV_LOG(DEBUG, "Advertize 1G"); + PMD_DRV_LOG(DEBUG, sc, "Advertize 1G"); } if (((vars->line_speed == ELINK_SPEED_AUTO_NEG) && (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) || @@ -3485,7 +3487,7 @@ static void elink_warpcore_enable_AN_KR(struct elink_phy *phy, elink_cl45_write(sc, phy, MDIO_AN_DEVAD, MDIO_WC_REG_PAR_DET_10G_CTRL, 1); elink_set_aer_mmd(params, phy); - PMD_DRV_LOG(DEBUG, "Advertize 10G"); + PMD_DRV_LOG(DEBUG, sc, "Advertize 10G"); } /* Set Transmit PMD settings */ @@ -3522,7 +3524,7 @@ static void elink_warpcore_enable_AN_KR(struct elink_phy *phy, elink_cl45_read_or_write(sc, phy, MDIO_WC_DEVAD, MDIO_WC_REG_DIGITAL6_MP5_NEXTPAGECTRL, 1); - PMD_DRV_LOG(DEBUG, "Enable CL37 BAM on KR"); + PMD_DRV_LOG(DEBUG, sc, "Enable CL37 BAM on KR"); } /* Advertise pause */ @@ -3859,7 +3861,7 @@ static void elink_warpcore_set_sgmii_speed(struct elink_phy *phy, elink_cl45_read_or_write(sc, phy, MDIO_WC_DEVAD, MDIO_WC_REG_COMBO_IEEE0_MIICTRL, 0x1000); - PMD_DRV_LOG(DEBUG, "set SGMII AUTONEG"); + PMD_DRV_LOG(DEBUG, sc, "set SGMII AUTONEG"); } else { elink_cl45_read(sc, phy, MDIO_WC_DEVAD, MDIO_WC_REG_COMBO_IEEE0_MIICTRL, &val16); @@ -3874,7 +3876,7 @@ static void elink_warpcore_set_sgmii_speed(struct elink_phy *phy, val16 |= 0x0040; break; default: - PMD_DRV_LOG(DEBUG, + PMD_DRV_LOG(DEBUG, sc, "Speed not supported: 0x%x", phy->req_line_speed); return; @@ -3886,11 +3888,11 @@ static void elink_warpcore_set_sgmii_speed(struct elink_phy *phy, elink_cl45_write(sc, phy, MDIO_WC_DEVAD, MDIO_WC_REG_COMBO_IEEE0_MIICTRL, val16); - PMD_DRV_LOG(DEBUG, "set SGMII force speed %d", + PMD_DRV_LOG(DEBUG, sc, "set SGMII force speed %d", phy->req_line_speed); elink_cl45_read(sc, phy, MDIO_WC_DEVAD, MDIO_WC_REG_COMBO_IEEE0_MIICTRL, &val16); - PMD_DRV_LOG(DEBUG, " (readback) %x", val16); + PMD_DRV_LOG(DEBUG, sc, " (readback) %x", val16); } /* SGMII Slave mode and disable signal detect */ @@ -4001,7 +4003,7 @@ static elink_status_t elink_get_mod_abs_int_cfg(struct bnx2x_softc *sc, */ if ((cfg_pin < PIN_CFG_GPIO0_P0) || (cfg_pin > PIN_CFG_GPIO3_P1)) { - PMD_DRV_LOG(DEBUG, + PMD_DRV_LOG(DEBUG, sc, "No cfg pin %x for module detect indication", cfg_pin); return ELINK_STATUS_ERROR; @@ -4093,7 +4095,7 @@ static void elink_warpcore_config_runtime(struct elink_phy *phy, 0x1200); vars->rx_tx_asic_rst--; - PMD_DRV_LOG(DEBUG, "0x%x retry left", + PMD_DRV_LOG(DEBUG, sc, "0x%x retry left", vars->rx_tx_asic_rst); } break; @@ -4115,10 +4117,10 @@ static void elink_warpcore_config_sfi(struct elink_phy *phy, if ((params->req_line_speed[ELINK_LINK_CONFIG_IDX(ELINK_INT_PHY)] == ELINK_SPEED_10000) && (phy->media_type != ELINK_ETH_PHY_SFP_1G_FIBER)) { - PMD_DRV_LOG(DEBUG, "Setting 10G SFI"); + PMD_DRV_LOG(DEBUG, params->sc, "Setting 10G SFI"); elink_warpcore_set_10G_XFI(phy, params, 0); } else { - PMD_DRV_LOG(DEBUG, "Setting 1G Fiber"); + PMD_DRV_LOG(DEBUG, params->sc, "Setting 1G Fiber"); elink_warpcore_set_sgmii_speed(phy, params, 1, 0); } } @@ -4135,7 +4137,7 @@ static void elink_sfp_e3_set_transmitter(struct elink_params *params, dev_info.port_hw_config[port].e3_sfp_ctrl)) & PORT_HW_CFG_E3_TX_LASER_MASK; /* Set the !tx_en since this pin is DISABLE_TX_LASER */ - PMD_DRV_LOG(DEBUG, "Setting WC TX to %d", tx_en); + PMD_DRV_LOG(DEBUG, sc, "Setting WC TX to %d", tx_en); /* For 20G, the expected pin to be used is 3 pins after the current */ elink_set_cfg_pin(sc, cfg_pin, tx_en ^ 1); @@ -4156,7 +4158,7 @@ static uint8_t elink_warpcore_config_init(struct elink_phy *phy, dev_info.port_hw_config[params->port]. default_cfg)) & PORT_HW_CFG_NET_SERDES_IF_MASK); - PMD_DRV_LOG(DEBUG, + PMD_DRV_LOG(DEBUG, sc, "Begin Warpcore init, link_speed %d, " "serdes_net_if = 0x%x", vars->line_speed, serdes_net_if); elink_set_aer_mmd(params, phy); @@ -4167,7 +4169,7 @@ static uint8_t elink_warpcore_config_init(struct elink_phy *phy, ((phy->req_line_speed == ELINK_SPEED_100) || (phy->req_line_speed == ELINK_SPEED_10)))) { vars->phy_flags |= PHY_SGMII_FLAG; - PMD_DRV_LOG(DEBUG, "Setting SGMII mode"); + PMD_DRV_LOG(DEBUG, sc, "Setting SGMII mode"); elink_warpcore_clear_regs(phy, params, lane); elink_warpcore_set_sgmii_speed(phy, params, 0, 1); } else { @@ -4177,7 +4179,7 @@ static uint8_t elink_warpcore_config_init(struct elink_phy *phy, if (params->loopback_mode != ELINK_LOOPBACK_EXT) elink_warpcore_enable_AN_KR(phy, params, vars); else { - PMD_DRV_LOG(DEBUG, "Setting KR 10G-Force"); + PMD_DRV_LOG(DEBUG, sc, "Setting KR 10G-Force"); elink_warpcore_set_10G_KR(phy, params); } break; @@ -4185,14 +4187,14 @@ static uint8_t elink_warpcore_config_init(struct elink_phy *phy, case PORT_HW_CFG_NET_SERDES_IF_XFI: elink_warpcore_clear_regs(phy, params, lane); if (vars->line_speed == ELINK_SPEED_10000) { - PMD_DRV_LOG(DEBUG, "Setting 10G XFI"); + PMD_DRV_LOG(DEBUG, sc, "Setting 10G XFI"); elink_warpcore_set_10G_XFI(phy, params, 1); } else { if (ELINK_SINGLE_MEDIA_DIRECT(params)) { - PMD_DRV_LOG(DEBUG, "1G Fiber"); + PMD_DRV_LOG(DEBUG, sc, "1G Fiber"); fiber_mode = 1; } else { - PMD_DRV_LOG(DEBUG, "10/100/1G SGMII"); + PMD_DRV_LOG(DEBUG, sc, "10/100/1G SGMII"); fiber_mode = 0; } elink_warpcore_set_sgmii_speed(phy, @@ -4221,10 +4223,10 @@ static uint8_t elink_warpcore_config_init(struct elink_phy *phy, case PORT_HW_CFG_NET_SERDES_IF_DXGXS: if (vars->line_speed != ELINK_SPEED_20000) { - PMD_DRV_LOG(DEBUG, "Speed not supported yet"); + PMD_DRV_LOG(DEBUG, sc, "Speed not supported yet"); return 0; } - PMD_DRV_LOG(DEBUG, "Setting 20G DXGXS"); + PMD_DRV_LOG(DEBUG, sc, "Setting 20G DXGXS"); elink_warpcore_set_20G_DXGXS(sc, phy, lane); /* Issue Module detection */ @@ -4234,12 +4236,12 @@ static uint8_t elink_warpcore_config_init(struct elink_phy *phy, if (!params->loopback_mode) { elink_warpcore_enable_AN_KR(phy, params, vars); } else { - PMD_DRV_LOG(DEBUG, "Setting KR 20G-Force"); + PMD_DRV_LOG(DEBUG, sc, "Setting KR 20G-Force"); elink_warpcore_set_20G_force_KR2(phy, params); } break; default: - PMD_DRV_LOG(DEBUG, + PMD_DRV_LOG(DEBUG, sc, "Unsupported Serdes Net Interface 0x%x", serdes_net_if); return 0; @@ -4248,7 +4250,7 @@ static uint8_t elink_warpcore_config_init(struct elink_phy *phy, /* Take lane out of reset after configuration is finished */ elink_warpcore_reset_lane(sc, phy, 0); - PMD_DRV_LOG(DEBUG, "Exit config init"); + PMD_DRV_LOG(DEBUG, sc, "Exit config init"); return 0; } @@ -4313,7 +4315,7 @@ static void elink_set_warpcore_loopback(struct elink_phy *phy, struct bnx2x_softc *sc = params->sc; uint16_t val16; uint32_t lane; - PMD_DRV_LOG(DEBUG, "Setting Warpcore loopback type %x, speed %d", + PMD_DRV_LOG(DEBUG, sc, "Setting Warpcore loopback type %x, speed %d", params->loopback_mode, phy->req_line_speed); if (phy->req_line_speed < ELINK_SPEED_10000 || @@ -4358,7 +4360,7 @@ static void elink_sync_link(struct elink_params *params, vars->phy_flags |= PHY_PHYSICAL_LINK_FLAG; vars->link_up = (vars->link_status & LINK_STATUS_LINK_UP); if (vars->link_up) { - PMD_DRV_LOG(DEBUG, "phy link up"); + PMD_DRV_LOG(DEBUG, sc, "phy link up"); vars->phy_link_up = 1; vars->duplex = DUPLEX_FULL; @@ -4436,7 +4438,7 @@ static void elink_sync_link(struct elink_params *params, vars->mac_type = ELINK_MAC_TYPE_EMAC; } } else { /* Link down */ - PMD_DRV_LOG(DEBUG, "phy link down"); + PMD_DRV_LOG(DEBUG, sc, "phy link down"); vars->phy_link_up = 0; @@ -4493,7 +4495,7 @@ void elink_link_status_update(struct elink_params *params, params->phy[ELINK_EXT_PHY2].media_type = (media_types & PORT_HW_CFG_MEDIA_TYPE_PHY2_MASK) >> PORT_HW_CFG_MEDIA_TYPE_PHY2_SHIFT; - PMD_DRV_LOG(DEBUG, "media_types = 0x%x", media_types); + PMD_DRV_LOG(DEBUG, sc, "media_types = 0x%x", media_types); /* Sync AEU offset */ sync_offset = params->shmem_base + @@ -4514,9 +4516,9 @@ void elink_link_status_update(struct elink_params *params, vars->link_attr_sync = SHMEM2_RD(sc, link_attr_sync[params->port]); - PMD_DRV_LOG(DEBUG, "link_status 0x%x phy_link_up %x int_mask 0x%x", + PMD_DRV_LOG(DEBUG, sc, "link_status 0x%x phy_link_up %x int_mask 0x%x", vars->link_status, vars->phy_link_up, vars->aeu_int_mask); - PMD_DRV_LOG(DEBUG, "line_speed %x duplex %x flow_ctrl 0x%x", + PMD_DRV_LOG(DEBUG, sc, "line_speed %x duplex %x flow_ctrl 0x%x", vars->line_speed, vars->duplex, vars->flow_ctrl); } @@ -4577,7 +4579,7 @@ static elink_status_t elink_reset_unicore(struct elink_params *params, elink_cb_event_log(sc, ELINK_LOG_ID_PHY_UNINITIALIZED, params->port); // "Warning: PHY was not initialized," // " Port %d", - PMD_DRV_LOG(DEBUG, "BUG! XGXS is still in reset!"); + PMD_DRV_LOG(DEBUG, sc, "BUG! XGXS is still in reset!"); return ELINK_STATUS_ERROR; } @@ -4636,7 +4638,7 @@ static void elink_set_parallel_detection(struct elink_phy *phy, control2 |= MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_PRL_DT_EN; else control2 &= ~MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_PRL_DT_EN; - PMD_DRV_LOG(DEBUG, "phy->speed_cap_mask = 0x%x, control2 = 0x%x", + PMD_DRV_LOG(DEBUG, sc, "phy->speed_cap_mask = 0x%x, control2 = 0x%x", phy->speed_cap_mask, control2); CL22_WR_OVER_CL45(sc, phy, MDIO_REG_BANK_SERDES_DIGITAL, @@ -4644,7 +4646,7 @@ static void elink_set_parallel_detection(struct elink_phy *phy, if ((phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) && (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) { - PMD_DRV_LOG(DEBUG, "XGXS"); + PMD_DRV_LOG(DEBUG, sc, "XGXS"); CL22_WR_OVER_CL45(sc, phy, MDIO_REG_BANK_10G_PARALLEL_DETECT, @@ -4797,7 +4799,7 @@ static void elink_program_serdes(struct elink_phy *phy, MDIO_REG_BANK_SERDES_DIGITAL, MDIO_SERDES_DIGITAL_MISC1, ®_val); /* Clearing the speed value before setting the right speed */ - PMD_DRV_LOG(DEBUG, "MDIO_REG_BANK_SERDES_DIGITAL = 0x%x", reg_val); + PMD_DRV_LOG(DEBUG, sc, "MDIO_REG_BANK_SERDES_DIGITAL = 0x%x", reg_val); reg_val &= ~(MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_MASK | MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_SEL); @@ -4865,7 +4867,7 @@ static void elink_restart_autoneg(struct elink_phy *phy, struct bnx2x_softc *sc = params->sc; uint16_t mii_control; - PMD_DRV_LOG(DEBUG, "elink_restart_autoneg"); + PMD_DRV_LOG(DEBUG, sc, "elink_restart_autoneg"); /* Enable and restart BAM/CL37 aneg */ if (enable_cl73) { @@ -4885,7 +4887,7 @@ static void elink_restart_autoneg(struct elink_phy *phy, CL22_RD_OVER_CL45(sc, phy, MDIO_REG_BANK_COMBO_IEEE0, MDIO_COMBO_IEEE0_MII_CONTROL, &mii_control); - PMD_DRV_LOG(DEBUG, + PMD_DRV_LOG(DEBUG, sc, "elink_restart_autoneg mii_control before = 0x%x", mii_control); CL22_WR_OVER_CL45(sc, phy, @@ -4944,7 +4946,7 @@ static void elink_initialize_sgmii_process(struct elink_phy *phy, break; default: /* Invalid speed for SGMII */ - PMD_DRV_LOG(DEBUG, "Invalid line_speed 0x%x", + PMD_DRV_LOG(DEBUG, sc, "Invalid line_speed 0x%x", vars->line_speed); break; } @@ -4979,7 +4981,7 @@ static elink_status_t elink_direct_parallel_detect_used(struct elink_phy *phy, MDIO_REG_BANK_SERDES_DIGITAL, MDIO_SERDES_DIGITAL_A_1000X_STATUS2, &status2_1000x); if (status2_1000x & MDIO_SERDES_DIGITAL_A_1000X_STATUS2_AN_DISABLED) { - PMD_DRV_LOG(DEBUG, "1G parallel detect link on port %d", + PMD_DRV_LOG(DEBUG, sc, "1G parallel detect link on port %d", params->port); return ELINK_STATUS_ERROR; } @@ -4989,7 +4991,7 @@ static elink_status_t elink_direct_parallel_detect_used(struct elink_phy *phy, MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_STATUS, &pd_10g); if (pd_10g & MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_STATUS_PD_LINK) { - PMD_DRV_LOG(DEBUG, "10G parallel detect link on port %d", + PMD_DRV_LOG(DEBUG, sc, "10G parallel detect link on port %d", params->port); return ELINK_STATUS_ERROR; } @@ -5020,7 +5022,7 @@ static void elink_update_adv_fc(struct elink_phy *phy, MDIO_CL73_IEEEB1_AN_ADV1_PAUSE_MASK) >> 8; pause_result |= (lp_pause & MDIO_CL73_IEEEB1_AN_LP_ADV1_PAUSE_MASK) >> 10; - PMD_DRV_LOG(DEBUG, "pause_result CL73 0x%x", pause_result); + PMD_DRV_LOG(DEBUG, sc, "pause_result CL73 0x%x", pause_result); } else { CL22_RD_OVER_CL45(sc, phy, MDIO_REG_BANK_COMBO_IEEE0, @@ -5033,7 +5035,7 @@ static void elink_update_adv_fc(struct elink_phy *phy, MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK) >> 5; pause_result |= (lp_pause & MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK) >> 7; - PMD_DRV_LOG(DEBUG, "pause_result CL37 0x%x", pause_result); + PMD_DRV_LOG(DEBUG, sc, "pause_result CL37 0x%x", pause_result); } elink_pause_resolve(vars, pause_result); @@ -5062,7 +5064,7 @@ static void elink_flow_ctrl_resolve(struct elink_phy *phy, } elink_update_adv_fc(phy, params, vars, gp_status); } - PMD_DRV_LOG(DEBUG, "flow_ctrl 0x%x", vars->flow_ctrl); + PMD_DRV_LOG(DEBUG, params->sc, "flow_ctrl 0x%x", vars->flow_ctrl); } static void elink_check_fallback_to_cl37(struct elink_phy *phy, @@ -5070,13 +5072,13 @@ static void elink_check_fallback_to_cl37(struct elink_phy *phy, { struct bnx2x_softc *sc = params->sc; uint16_t rx_status, ustat_val, cl37_fsm_received; - PMD_DRV_LOG(DEBUG, "elink_check_fallback_to_cl37"); + PMD_DRV_LOG(DEBUG, sc, "elink_check_fallback_to_cl37"); /* Step 1: Make sure signal is detected */ CL22_RD_OVER_CL45(sc, phy, MDIO_REG_BANK_RX0, MDIO_RX0_RX_STATUS, &rx_status); if ((rx_status & MDIO_RX0_RX_STATUS_SIGDET) != (MDIO_RX0_RX_STATUS_SIGDET)) { - PMD_DRV_LOG(DEBUG, "Signal is not detected. Restoring CL73." + PMD_DRV_LOG(DEBUG, sc, "Signal is not detected. Restoring CL73." "rx_status(0x80b0) = 0x%x", rx_status); CL22_WR_OVER_CL45(sc, phy, MDIO_REG_BANK_CL73_IEEEB0, @@ -5093,7 +5095,7 @@ static void elink_check_fallback_to_cl37(struct elink_phy *phy, MDIO_CL73_USERB0_CL73_USTAT1_AN_GOOD_CHECK_BAM37)) != (MDIO_CL73_USERB0_CL73_USTAT1_LINK_STATUS_CHECK | MDIO_CL73_USERB0_CL73_USTAT1_AN_GOOD_CHECK_BAM37)) { - PMD_DRV_LOG(DEBUG, "CL73 state-machine is not stable. " + PMD_DRV_LOG(DEBUG, sc, "CL73 state-machine is not stable. " "ustat_val(0x8371) = 0x%x", ustat_val); return; } @@ -5108,7 +5110,7 @@ static void elink_check_fallback_to_cl37(struct elink_phy *phy, MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_BRCM_OUI_MSG)) != (MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_OVER1G_MSG | MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_BRCM_OUI_MSG)) { - PMD_DRV_LOG(DEBUG, "No CL37 FSM were received. " + PMD_DRV_LOG(DEBUG, sc, "No CL37 FSM were received. " "misc_rx_status(0x8330) = 0x%x", cl37_fsm_received); return; } @@ -5124,7 +5126,7 @@ static void elink_check_fallback_to_cl37(struct elink_phy *phy, MDIO_CL73_IEEEB0_CL73_AN_CONTROL, 0); /* Restart CL37 autoneg */ elink_restart_autoneg(phy, params, 0); - PMD_DRV_LOG(DEBUG, "Disabling CL73, and restarting CL37 autoneg"); + PMD_DRV_LOG(DEBUG, sc, "Disabling CL73, and restarting CL37 autoneg"); } static void elink_xgxs_an_resolve(struct elink_phy *phy, @@ -5148,7 +5150,7 @@ static elink_status_t elink_get_link_speed_duplex(struct elink_phy *phy, if (phy->req_line_speed == ELINK_SPEED_AUTO_NEG) vars->link_status |= LINK_STATUS_AUTO_NEGOTIATE_ENABLED; if (is_link_up) { - PMD_DRV_LOG(DEBUG, "phy link up"); + PMD_DRV_LOG(DEBUG, params->sc, "phy link up"); vars->phy_link_up = 1; vars->link_status |= LINK_STATUS_LINK_UP; @@ -5189,7 +5191,7 @@ static elink_status_t elink_get_link_speed_duplex(struct elink_phy *phy, case ELINK_GP_STATUS_5G: case ELINK_GP_STATUS_6G: - PMD_DRV_LOG(DEBUG, + PMD_DRV_LOG(DEBUG, params->sc, "link speed unsupported gp_status 0x%x", speed_mask); return ELINK_STATUS_ERROR; @@ -5209,13 +5211,13 @@ static elink_status_t elink_get_link_speed_duplex(struct elink_phy *phy, vars->link_status |= ELINK_LINK_20GTFD; break; default: - PMD_DRV_LOG(DEBUG, + PMD_DRV_LOG(DEBUG, params->sc, "link speed unsupported gp_status 0x%x", speed_mask); return ELINK_STATUS_ERROR; } } else { /* link_down */ - PMD_DRV_LOG(DEBUG, "phy link down"); + PMD_DRV_LOG(DEBUG, params->sc, "phy link down"); vars->phy_link_up = 0; @@ -5223,7 +5225,7 @@ static elink_status_t elink_get_link_speed_duplex(struct elink_phy *phy, vars->flow_ctrl = ELINK_FLOW_CTRL_NONE; vars->mac_type = ELINK_MAC_TYPE_NONE; } - PMD_DRV_LOG(DEBUG, " phy_link_up %x line_speed %d", + PMD_DRV_LOG(DEBUG, params->sc, " phy_link_up %x line_speed %d", vars->phy_link_up, vars->line_speed); return ELINK_STATUS_OK; } @@ -5246,7 +5248,7 @@ static uint8_t elink_link_settings_status(struct elink_phy *phy, if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS) link_up = 1; speed_mask = gp_status & ELINK_GP_STATUS_SPEED_MASK; - PMD_DRV_LOG(DEBUG, "gp_status 0x%x, is_link_up %d, speed_mask 0x%x", + PMD_DRV_LOG(DEBUG, sc, "gp_status 0x%x, is_link_up %d, speed_mask 0x%x", gp_status, link_up, speed_mask); rc = elink_get_link_speed_duplex(phy, params, vars, link_up, speed_mask, duplex); @@ -5296,7 +5298,7 @@ static uint8_t elink_link_settings_status(struct elink_phy *phy, LINK_STATUS_LINK_PARTNER_10GXFD_CAPABLE; } - PMD_DRV_LOG(DEBUG, "duplex %x flow_ctrl 0x%x link_status 0x%x", + PMD_DRV_LOG(DEBUG, sc, "duplex %x flow_ctrl 0x%x link_status 0x%x", vars->duplex, vars->flow_ctrl, vars->link_status); return rc; } @@ -5322,7 +5324,7 @@ static uint8_t elink_warpcore_read_status(struct elink_phy *phy, uint16_t temp_link_up; elink_cl45_read(sc, phy, MDIO_WC_DEVAD, 1, &temp_link_up); elink_cl45_read(sc, phy, MDIO_WC_DEVAD, 1, &link_up); - PMD_DRV_LOG(DEBUG, "PCS RX link status = 0x%x-->0x%x", + PMD_DRV_LOG(DEBUG, sc, "PCS RX link status = 0x%x-->0x%x", temp_link_up, link_up); link_up &= (1 << 2); if (link_up) @@ -5330,7 +5332,7 @@ static uint8_t elink_warpcore_read_status(struct elink_phy *phy, } else { elink_cl45_read(sc, phy, MDIO_WC_DEVAD, MDIO_WC_REG_GP2_STATUS_GP_2_1, &gp_status1); - PMD_DRV_LOG(DEBUG, "0x81d1 = 0x%x", gp_status1); + PMD_DRV_LOG(DEBUG, sc, "0x81d1 = 0x%x", gp_status1); /* Check for either KR, 1G, or AN up. */ link_up = ((gp_status1 >> 8) | (gp_status1 >> 12) | (gp_status1)) & (1 << lane); @@ -5400,7 +5402,7 @@ static uint8_t elink_warpcore_read_status(struct elink_phy *phy, elink_cl45_read(sc, phy, MDIO_WC_DEVAD, MDIO_WC_REG_GP2_STATUS_GP_2_3, &gp_speed); } - PMD_DRV_LOG(DEBUG, "lane %d gp_speed 0x%x", lane, gp_speed); + PMD_DRV_LOG(DEBUG, sc, "lane %d gp_speed 0x%x", lane, gp_speed); if ((lane & 1) == 0) gp_speed <<= 8; @@ -5416,7 +5418,7 @@ static uint8_t elink_warpcore_read_status(struct elink_phy *phy, (!(phy->flags & ELINK_FLAGS_WC_DUAL_MODE))) vars->rx_tx_asic_rst = MAX_KR_LINK_RETRY; - PMD_DRV_LOG(DEBUG, "duplex %x flow_ctrl 0x%x link_status 0x%x", + PMD_DRV_LOG(DEBUG, sc, "duplex %x flow_ctrl 0x%x link_status 0x%x", vars->duplex, vars->flow_ctrl, vars->link_status); return rc; } @@ -5463,7 +5465,7 @@ static elink_status_t elink_emac_program(struct elink_params *params, uint8_t port = params->port; uint16_t mode = 0; - PMD_DRV_LOG(DEBUG, "setting link speed & duplex"); + PMD_DRV_LOG(DEBUG, sc, "setting link speed & duplex"); elink_bits_dis(sc, GRCBASE_EMAC0 + port * 0x400 + EMAC_REG_EMAC_MODE, (EMAC_MODE_25G_MODE | @@ -5487,7 +5489,8 @@ static elink_status_t elink_emac_program(struct elink_params *params, default: /* 10G not valid for EMAC */ - PMD_DRV_LOG(DEBUG, "Invalid line_speed 0x%x", vars->line_speed); + PMD_DRV_LOG(DEBUG, sc, + "Invalid line_speed 0x%x", vars->line_speed); return ELINK_STATUS_ERROR; } @@ -5539,7 +5542,7 @@ static uint8_t elink_xgxs_config_init(struct elink_phy *phy, if (vars->line_speed != ELINK_SPEED_AUTO_NEG || (ELINK_SINGLE_MEDIA_DIRECT(params) && params->loopback_mode == ELINK_LOOPBACK_EXT)) { - PMD_DRV_LOG(DEBUG, "not SGMII, no AN"); + PMD_DRV_LOG(DEBUG, params->sc, "not SGMII, no AN"); /* Disable autoneg */ elink_set_autoneg(phy, params, vars, 0); @@ -5548,7 +5551,7 @@ static uint8_t elink_xgxs_config_init(struct elink_phy *phy, elink_program_serdes(phy, params, vars); } else { /* AN_mode */ - PMD_DRV_LOG(DEBUG, "not SGMII, AN"); + PMD_DRV_LOG(DEBUG, params->sc, "not SGMII, AN"); /* AN enabled */ elink_set_brcm_cl37_advertisement(phy, params); @@ -5565,7 +5568,7 @@ static uint8_t elink_xgxs_config_init(struct elink_phy *phy, } } else { /* SGMII mode */ - PMD_DRV_LOG(DEBUG, "SGMII"); + PMD_DRV_LOG(DEBUG, params->sc, "SGMII"); elink_initialize_sgmii_process(phy, params, vars); } @@ -5634,7 +5637,7 @@ static uint16_t elink_wait_reset_complete(struct bnx2x_softc *sc, elink_cb_event_log(sc, ELINK_LOG_ID_PHY_UNINITIALIZED, params->port); // "Warning: PHY was not initialized," // " Port %d", - PMD_DRV_LOG(DEBUG, "control reg 0x%x (after %d ms)", ctrl, cnt); + PMD_DRV_LOG(DEBUG, sc, "control reg 0x%x (after %d ms)", ctrl, cnt); return cnt; } @@ -5652,35 +5655,35 @@ static void elink_link_int_enable(struct elink_params *params) } else if (params->switch_cfg == ELINK_SWITCH_CFG_10G) { mask = (ELINK_NIG_MASK_XGXS0_LINK10G | ELINK_NIG_MASK_XGXS0_LINK_STATUS); - PMD_DRV_LOG(DEBUG, "enabled XGXS interrupt"); + PMD_DRV_LOG(DEBUG, sc, "enabled XGXS interrupt"); if (!(ELINK_SINGLE_MEDIA_DIRECT(params)) && params->phy[ELINK_INT_PHY].type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE) { mask |= ELINK_NIG_MASK_MI_INT; - PMD_DRV_LOG(DEBUG, "enabled external phy int"); + PMD_DRV_LOG(DEBUG, sc, "enabled external phy int"); } } else { /* SerDes */ mask = ELINK_NIG_MASK_SERDES0_LINK_STATUS; - PMD_DRV_LOG(DEBUG, "enabled SerDes interrupt"); + PMD_DRV_LOG(DEBUG, sc, "enabled SerDes interrupt"); if (!(ELINK_SINGLE_MEDIA_DIRECT(params)) && params->phy[ELINK_INT_PHY].type != PORT_HW_CFG_SERDES_EXT_PHY_TYPE_NOT_CONN) { mask |= ELINK_NIG_MASK_MI_INT; - PMD_DRV_LOG(DEBUG, "enabled external phy int"); + PMD_DRV_LOG(DEBUG, sc, "enabled external phy int"); } } elink_bits_en(sc, NIG_REG_MASK_INTERRUPT_PORT0 + port * 4, mask); - PMD_DRV_LOG(DEBUG, "port %x, is_xgxs %x, int_status 0x%x", port, + PMD_DRV_LOG(DEBUG, sc, "port %x, is_xgxs %x, int_status 0x%x", port, (params->switch_cfg == ELINK_SWITCH_CFG_10G), REG_RD(sc, NIG_REG_STATUS_INTERRUPT_PORT0 + port * 4)); - PMD_DRV_LOG(DEBUG, " int_mask 0x%x, MI_INT %x, SERDES_LINK %x", + PMD_DRV_LOG(DEBUG, sc, " int_mask 0x%x, MI_INT %x, SERDES_LINK %x", REG_RD(sc, NIG_REG_MASK_INTERRUPT_PORT0 + port * 4), REG_RD(sc, NIG_REG_EMAC0_STATUS_MISC_MI_INT + port * 0x18), REG_RD(sc, NIG_REG_SERDES0_STATUS_LINK_STATUS + port * 0x3c)); - PMD_DRV_LOG(DEBUG, " 10G %x, XGXS_LINK %x", + PMD_DRV_LOG(DEBUG, sc, " 10G %x, XGXS_LINK %x", REG_RD(sc, NIG_REG_XGXS0_STATUS_LINK10G + port * 0x68), REG_RD(sc, NIG_REG_XGXS0_STATUS_LINK_STATUS + port * 0x68)); } @@ -5696,7 +5699,7 @@ static void elink_rearm_latch_signal(struct bnx2x_softc *sc, uint8_t port, */ /* Read Latched signals */ latch_status = REG_RD(sc, NIG_REG_LATCH_STATUS_0 + port * 8); - PMD_DRV_LOG(DEBUG, "latch_status = 0x%x", latch_status); + PMD_DRV_LOG(DEBUG, sc, "latch_status = 0x%x", latch_status); /* Handle only those with latched-signal=up. */ if (exp_mi_int) elink_bits_en(sc, @@ -5748,7 +5751,7 @@ static void elink_link_int_ack(struct elink_params *params, } else mask = ELINK_NIG_STATUS_SERDES0_LINK_STATUS; } - PMD_DRV_LOG(DEBUG, "Ack link up interrupt with mask 0x%x", + PMD_DRV_LOG(DEBUG, sc, "Ack link up interrupt with mask 0x%x", mask); elink_bits_en(sc, NIG_REG_STATUS_INTERRUPT_PORT0 + port * 4, mask); @@ -5811,7 +5814,7 @@ static void elink_set_xgxs_loopback(struct elink_phy *phy, if (phy->req_line_speed != ELINK_SPEED_1000) { uint32_t md_devad = 0; - PMD_DRV_LOG(DEBUG, "XGXS 10G loopback enable"); + PMD_DRV_LOG(DEBUG, sc, "XGXS 10G loopback enable"); if (!CHIP_IS_E3(sc)) { /* Change the uni_phy_addr in the nig */ @@ -5843,7 +5846,7 @@ static void elink_set_xgxs_loopback(struct elink_phy *phy, } } else { uint16_t mii_ctrl; - PMD_DRV_LOG(DEBUG, "XGXS 1G loopback enable"); + PMD_DRV_LOG(DEBUG, sc, "XGXS 1G loopback enable"); elink_cl45_read(sc, phy, 5, (MDIO_REG_BANK_COMBO_IEEE0 + (MDIO_COMBO_IEEE0_MII_CONTROL & 0xf)), @@ -5867,8 +5870,9 @@ elink_status_t elink_set_led(struct elink_params *params, uint32_t tmp; uint32_t emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0; struct bnx2x_softc *sc = params->sc; - PMD_DRV_LOG(DEBUG, "elink_set_led: port %x, mode %d", port, mode); - PMD_DRV_LOG(DEBUG, "speed 0x%x, hw_led_mode 0x%x", speed, hw_led_mode); + PMD_DRV_LOG(DEBUG, sc, "elink_set_led: port %x, mode %d", port, mode); + PMD_DRV_LOG(DEBUG, sc, + "speed 0x%x, hw_led_mode 0x%x", speed, hw_led_mode); /* In case */ for (phy_idx = ELINK_EXT_PHY1; phy_idx < ELINK_MAX_PHYS; phy_idx++) { if (params->phy[phy_idx].set_link_led) { @@ -5988,7 +5992,8 @@ elink_status_t elink_set_led(struct elink_params *params, default: rc = ELINK_STATUS_ERROR; - PMD_DRV_LOG(DEBUG, "elink_set_led: Invalid led mode %d", mode); + PMD_DRV_LOG(DEBUG, sc, + "elink_set_led: Invalid led mode %d", mode); break; } return rc; @@ -6055,7 +6060,7 @@ static elink_status_t elink_link_initialize(struct elink_params *params, if (phy_index == ELINK_EXT_PHY2 && (elink_phy_selection(params) == PORT_HW_CFG_PHY_SELECTION_FIRST_PHY)) { - PMD_DRV_LOG(DEBUG, + PMD_DRV_LOG(DEBUG, sc, "Not initializing second phy"); continue; } @@ -6096,7 +6101,7 @@ static void elink_common_ext_link_reset(__rte_unused struct elink_phy *phy, MISC_REGISTERS_GPIO_OUTPUT_LOW, gpio_port); elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_2, MISC_REGISTERS_GPIO_OUTPUT_LOW, gpio_port); - PMD_DRV_LOG(DEBUG, "reset external PHY"); + PMD_DRV_LOG(DEBUG, sc, "reset external PHY"); } static elink_status_t elink_update_link_down(struct elink_params *params, @@ -6105,7 +6110,7 @@ static elink_status_t elink_update_link_down(struct elink_params *params, struct bnx2x_softc *sc = params->sc; uint8_t port = params->port; - PMD_DRV_LOG(DEBUG, "Port %x: Link is down", port); + PMD_DRV_LOG(DEBUG, sc, "Port %x: Link is down", port); elink_set_led(params, vars, ELINK_LED_MODE_OFF, 0); vars->phy_flags &= ~PHY_PHYSICAL_LINK_FLAG; /* Indicate no mac active */ @@ -6166,7 +6171,7 @@ static elink_status_t elink_update_link_up(struct elink_params *params, if (link_10g) { if (elink_xmac_enable(params, vars, 0) == ELINK_STATUS_NO_LINK) { - PMD_DRV_LOG(DEBUG, "Found errors on XMAC"); + PMD_DRV_LOG(DEBUG, sc, "Found errors on XMAC"); vars->link_up = 0; vars->phy_flags |= PHY_HALF_OPEN_CONN_FLAG; vars->link_status &= ~LINK_STATUS_LINK_UP; @@ -6178,7 +6183,7 @@ static elink_status_t elink_update_link_up(struct elink_params *params, if ((vars->eee_status & SHMEM_EEE_ACTIVE_BIT) && (vars->eee_status & SHMEM_EEE_LPI_REQUESTED_BIT)) { - PMD_DRV_LOG(DEBUG, "Enabling LPI assertion"); + PMD_DRV_LOG(DEBUG, sc, "Enabling LPI assertion"); REG_WR(sc, MISC_REG_CPMU_LP_FW_ENABLE_P0 + (params->port << 2), 1); REG_WR(sc, MISC_REG_CPMU_LP_DR_ENABLE, 1); @@ -6190,7 +6195,7 @@ static elink_status_t elink_update_link_up(struct elink_params *params, if (link_10g) { if (elink_bmac_enable(params, vars, 0, 1) == ELINK_STATUS_NO_LINK) { - PMD_DRV_LOG(DEBUG, "Found errors on BMAC"); + PMD_DRV_LOG(DEBUG, sc, "Found errors on BMAC"); vars->link_up = 0; vars->phy_flags |= PHY_HALF_OPEN_CONN_FLAG; vars->link_status &= ~LINK_STATUS_LINK_UP; @@ -6275,19 +6280,19 @@ elink_status_t elink_link_update(struct elink_params * params, if (USES_WARPCORE(sc)) elink_set_aer_mmd(params, ¶ms->phy[ELINK_INT_PHY]); - PMD_DRV_LOG(DEBUG, "port %x, XGXS?%x, int_status 0x%x", + PMD_DRV_LOG(DEBUG, sc, "port %x, XGXS?%x, int_status 0x%x", port, (vars->phy_flags & PHY_XGXS_FLAG), REG_RD(sc, NIG_REG_STATUS_INTERRUPT_PORT0 + port * 4)); is_mi_int = (uint8_t) (REG_RD(sc, NIG_REG_EMAC0_STATUS_MISC_MI_INT + port * 0x18) > 0); - PMD_DRV_LOG(DEBUG, "int_mask 0x%x MI_INT %x, SERDES_LINK %x", + PMD_DRV_LOG(DEBUG, sc, "int_mask 0x%x MI_INT %x, SERDES_LINK %x", REG_RD(sc, NIG_REG_MASK_INTERRUPT_PORT0 + port * 4), is_mi_int, REG_RD(sc, NIG_REG_SERDES0_STATUS_LINK_STATUS + port * 0x3c)); - PMD_DRV_LOG(DEBUG, " 10G %x, XGXS_LINK %x", + PMD_DRV_LOG(DEBUG, sc, " 10G %x, XGXS_LINK %x", REG_RD(sc, NIG_REG_XGXS0_STATUS_LINK10G + port * 0x68), REG_RD(sc, NIG_REG_XGXS0_STATUS_LINK_STATUS + port * 0x68)); @@ -6311,10 +6316,10 @@ elink_status_t elink_link_update(struct elink_params * params, cur_link_up = phy->read_status(phy, params, &phy_vars[phy_index]); if (cur_link_up) { - PMD_DRV_LOG(DEBUG, "phy in index %d link is up", + PMD_DRV_LOG(DEBUG, sc, "phy in index %d link is up", phy_index); } else { - PMD_DRV_LOG(DEBUG, "phy in index %d link is down", + PMD_DRV_LOG(DEBUG, sc, "phy in index %d link is down", phy_index); continue; } @@ -6347,7 +6352,7 @@ elink_status_t elink_link_update(struct elink_params * params, * to link up by itself (using configuration) * - DEFAULT should be overridden during initialization */ - PMD_DRV_LOG(DEBUG, "Invalid link indication" + PMD_DRV_LOG(DEBUG, sc, "Invalid link indication" "mpc=0x%x. DISABLING LINK !!!", params->multi_phy_config); ext_phy_link_up = 0; @@ -6385,7 +6390,7 @@ elink_status_t elink_link_update(struct elink_params * params, */ if (active_external_phy == ELINK_EXT_PHY1) { if (params->phy[ELINK_EXT_PHY2].phy_specific_func) { - PMD_DRV_LOG(DEBUG, "Disabling TX on EXT_PHY2"); + PMD_DRV_LOG(DEBUG, sc, "Disabling TX on EXT_PHY2"); params->phy[ELINK_EXT_PHY2]. phy_specific_func(¶ms-> phy[ELINK_EXT_PHY2], @@ -6403,7 +6408,7 @@ elink_status_t elink_link_update(struct elink_params * params, vars->eee_status = phy_vars[active_external_phy].eee_status; - PMD_DRV_LOG(DEBUG, "Active external phy selected: %x", + PMD_DRV_LOG(DEBUG, sc, "Active external phy selected: %x", active_external_phy); } @@ -6417,7 +6422,7 @@ elink_status_t elink_link_update(struct elink_params * params, break; } } - PMD_DRV_LOG(DEBUG, "vars->flow_ctrl = 0x%x, vars->link_status = 0x%x," + PMD_DRV_LOG(DEBUG, sc, "vars->flow_ctrl = 0x%x, vars->link_status = 0x%x," " ext_phy_line_speed = %d", vars->flow_ctrl, vars->link_status, ext_phy_line_speed); /* Upon link speed change set the NIG into drain mode. Comes to @@ -6428,7 +6433,7 @@ elink_status_t elink_link_update(struct elink_params * params, if (vars->phy_link_up) { if (!(ELINK_SINGLE_MEDIA_DIRECT(params)) && ext_phy_link_up && (ext_phy_line_speed != vars->line_speed)) { - PMD_DRV_LOG(DEBUG, "Internal link speed %d is" + PMD_DRV_LOG(DEBUG, sc, "Internal link speed %d is" " different than the external" " link speed %d", vars->line_speed, ext_phy_line_speed); @@ -6454,7 +6459,7 @@ elink_status_t elink_link_update(struct elink_params * params, * initialize it */ if (!(ELINK_SINGLE_MEDIA_DIRECT(params))) { - PMD_DRV_LOG(DEBUG, "ext_phy_link_up = %d, int_link_up = %d," + PMD_DRV_LOG(DEBUG, sc, "ext_phy_link_up = %d, int_link_up = %d," " init_preceding = %d", ext_phy_link_up, vars->phy_link_up, params->phy[ELINK_EXT_PHY1].flags & @@ -6519,7 +6524,7 @@ static void elink_save_spirom_version(struct bnx2x_softc *sc, __rte_unused uint8_t port, uint32_t spirom_ver, uint32_t ver_addr) { - PMD_DRV_LOG(DEBUG, "FW version 0x%x:0x%x for port %d", + PMD_DRV_LOG(DEBUG, sc, "FW version 0x%x:0x%x for port %d", (uint16_t) (spirom_ver >> 16), (uint16_t) spirom_ver, port); if (ver_addr) @@ -6585,7 +6590,7 @@ static void elink_8073_resolve_fc(struct elink_phy *phy, MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) >> 7; elink_pause_resolve(vars, pause_result); - PMD_DRV_LOG(DEBUG, "Ext PHY CL37 pause result 0x%x", + PMD_DRV_LOG(DEBUG, sc, "Ext PHY CL37 pause result 0x%x", pause_result); } } @@ -6629,7 +6634,7 @@ static elink_status_t elink_8073_8727_external_rom_boot(struct bnx2x_softc *sc, do { count++; if (count > 300) { - PMD_DRV_LOG(DEBUG, + PMD_DRV_LOG(DEBUG, sc, "elink_8073_8727_external_rom_boot port %x:" "Download failed. fw version = 0x%x", port, fw_ver1); @@ -6654,7 +6659,7 @@ static elink_status_t elink_8073_8727_external_rom_boot(struct bnx2x_softc *sc, MDIO_PMA_DEVAD, MDIO_PMA_REG_MISC_CTRL1, 0x0000); elink_save_bnx2x_spirom_ver(sc, phy, port); - PMD_DRV_LOG(DEBUG, + PMD_DRV_LOG(DEBUG, sc, "elink_8073_8727_external_rom_boot port %x:" "Download complete. fw version = 0x%x", port, fw_ver1); @@ -6715,10 +6720,10 @@ static elink_status_t elink_8073_xaui_wa(struct bnx2x_softc *sc, * these bits indicate 2.5G or 1G link up). */ if (!(val & (1 << 14)) || !(val & (1 << 13))) { - PMD_DRV_LOG(DEBUG, "XAUI work-around not required"); + PMD_DRV_LOG(DEBUG, sc, "XAUI work-around not required"); return ELINK_STATUS_OK; } else if (!(val & (1 << 15))) { - PMD_DRV_LOG(DEBUG, "bit 15 went off"); + PMD_DRV_LOG(DEBUG, sc, "bit 15 went off"); /* If bit 15 is 0, then poll Dev1, Reg $C841 until it's * MSB (bit15) goes to 1 (indicating that the XAUI * workaround has completed), then continue on with @@ -6730,7 +6735,7 @@ static elink_status_t elink_8073_xaui_wa(struct bnx2x_softc *sc, MDIO_PMA_REG_8073_XAUI_WA, &val); if (val & (1 << 15)) { - PMD_DRV_LOG(DEBUG, + PMD_DRV_LOG(DEBUG, sc, "XAUI workaround has completed"); return ELINK_STATUS_OK; } @@ -6740,7 +6745,7 @@ static elink_status_t elink_8073_xaui_wa(struct bnx2x_softc *sc, } DELAY(1000 * 3); } - PMD_DRV_LOG(DEBUG, "Warning: XAUI work-around timeout !!!"); + PMD_DRV_LOG(DEBUG, sc, "Warning: XAUI work-around timeout !!!"); return ELINK_STATUS_ERROR; } @@ -6782,7 +6787,7 @@ static void elink_8073_set_pause_cl37(struct elink_params *params, MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) { cl37_val |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH; } - PMD_DRV_LOG(DEBUG, "Ext phy AN advertize cl37 0x%x", cl37_val); + PMD_DRV_LOG(DEBUG, sc, "Ext phy AN advertize cl37 0x%x", cl37_val); elink_cl45_write(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_CL37_FC_LD, cl37_val); @@ -6813,7 +6818,7 @@ static uint8_t elink_8073_config_init(struct elink_phy *phy, struct bnx2x_softc *sc = params->sc; uint16_t val = 0, tmp1; uint8_t gpio_port; - PMD_DRV_LOG(DEBUG, "Init 8073"); + PMD_DRV_LOG(DEBUG, sc, "Init 8073"); if (CHIP_IS_E2(sc)) gpio_port = SC_PATH(sc); @@ -6834,12 +6839,12 @@ static uint8_t elink_8073_config_init(struct elink_phy *phy, elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXSTAT, &tmp1); - PMD_DRV_LOG(DEBUG, "Before rom RX_ALARM(port1): 0x%x", tmp1); + PMD_DRV_LOG(DEBUG, sc, "Before rom RX_ALARM(port1): 0x%x", tmp1); /* Swap polarity if required - Must be done only in non-1G mode */ if (params->lane_config & PORT_HW_CFG_SWAP_PHY_POLARITY_ENABLED) { /* Configure the 8073 to swap _P and _N of the KR lines */ - PMD_DRV_LOG(DEBUG, "Swapping polarity for the 8073"); + PMD_DRV_LOG(DEBUG, sc, "Swapping polarity for the 8073"); /* 10G Rx/Tx and 1G Tx signal polarity swap */ elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, @@ -6861,11 +6866,11 @@ static uint8_t elink_8073_config_init(struct elink_phy *phy, MDIO_AN_DEVAD, MDIO_AN_REG_8073_BAM, &val); elink_cl45_write(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_8073_BAM, val | 1); - PMD_DRV_LOG(DEBUG, "Enable CL37 BAM on KR"); + PMD_DRV_LOG(DEBUG, sc, "Enable CL37 BAM on KR"); } if (params->loopback_mode == ELINK_LOOPBACK_EXT) { elink_807x_force_10G(sc, phy); - PMD_DRV_LOG(DEBUG, "Forced speed 10G on 807X"); + PMD_DRV_LOG(DEBUG, sc, "Forced speed 10G on 807X"); return ELINK_STATUS_OK; } else { elink_cl45_write(sc, phy, @@ -6891,7 +6896,7 @@ static uint8_t elink_8073_config_init(struct elink_phy *phy, (PORT_HW_CFG_SPEED_CAPABILITY_D0_1G | PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G)) val |= (1 << 5); - PMD_DRV_LOG(DEBUG, "807x autoneg val = 0x%x", val); + PMD_DRV_LOG(DEBUG, sc, "807x autoneg val = 0x%x", val); } elink_cl45_write(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_ADV, val); @@ -6905,13 +6910,13 @@ static uint8_t elink_8073_config_init(struct elink_phy *phy, elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_8073_CHIP_REV, &phy_ver); - PMD_DRV_LOG(DEBUG, "Add 2.5G"); + PMD_DRV_LOG(DEBUG, sc, "Add 2.5G"); if (phy_ver > 0) tmp1 |= 1; else tmp1 &= 0xfffe; } else { - PMD_DRV_LOG(DEBUG, "Disable 2.5G"); + PMD_DRV_LOG(DEBUG, sc, "Disable 2.5G"); tmp1 &= 0xfffe; } @@ -6945,7 +6950,7 @@ static uint8_t elink_8073_config_init(struct elink_phy *phy, /* Restart autoneg */ DELAY(1000 * 500); elink_cl45_write(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_CTRL, 0x1200); - PMD_DRV_LOG(DEBUG, "807x Autoneg Restart: Advertise 1G=%x, 10G=%x", + PMD_DRV_LOG(DEBUG, sc, "807x Autoneg Restart: Advertise 1G=%x, 10G=%x", ((val & (1 << 5)) > 0), ((val & (1 << 7)) > 0)); return ELINK_STATUS_OK; } @@ -6962,12 +6967,12 @@ static uint8_t elink_8073_read_status(struct elink_phy *phy, elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val1); - PMD_DRV_LOG(DEBUG, "8703 LASI status 0x%x", val1); + PMD_DRV_LOG(DEBUG, sc, "8703 LASI status 0x%x", val1); /* Clear the interrupt LASI status register */ elink_cl45_read(sc, phy, MDIO_PCS_DEVAD, MDIO_PCS_REG_STATUS, &val2); elink_cl45_read(sc, phy, MDIO_PCS_DEVAD, MDIO_PCS_REG_STATUS, &val1); - PMD_DRV_LOG(DEBUG, "807x PCS status 0x%x->0x%x", val2, val1); + PMD_DRV_LOG(DEBUG, sc, "807x PCS status 0x%x->0x%x", val2, val1); /* Clear MSG-OUT */ elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_M8051_MSGOUT_REG, &val1); @@ -6975,16 +6980,16 @@ static uint8_t elink_8073_read_status(struct elink_phy *phy, /* Check the LASI */ elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXSTAT, &val2); - PMD_DRV_LOG(DEBUG, "KR 0x9003 0x%x", val2); + PMD_DRV_LOG(DEBUG, sc, "KR 0x9003 0x%x", val2); /* Check the link status */ elink_cl45_read(sc, phy, MDIO_PCS_DEVAD, MDIO_PCS_REG_STATUS, &val2); - PMD_DRV_LOG(DEBUG, "KR PCS status 0x%x", val2); + PMD_DRV_LOG(DEBUG, sc, "KR PCS status 0x%x", val2); elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val2); elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val1); link_up = ((val1 & 4) == 4); - PMD_DRV_LOG(DEBUG, "PMA_REG_STATUS=0x%x", val1); + PMD_DRV_LOG(DEBUG, sc, "PMA_REG_STATUS=0x%x", val1); if (link_up && ((phy->req_line_speed != ELINK_SPEED_10000))) { if (elink_8073_xaui_wa(sc, phy) != 0) @@ -6998,7 +7003,7 @@ static uint8_t elink_8073_read_status(struct elink_phy *phy, /* Check the link status on 1.1.2 */ elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val2); elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val1); - PMD_DRV_LOG(DEBUG, "KR PMA status 0x%x->0x%x," + PMD_DRV_LOG(DEBUG, sc, "KR PMA status 0x%x->0x%x," "an_link_status=0x%x", val2, val1, an1000_status); link_up = (((val1 & 4) == 4) || (an1000_status & (1 << 1))); @@ -7024,21 +7029,21 @@ static uint8_t elink_8073_read_status(struct elink_phy *phy, if ((link_status & (1 << 2)) && (!(link_status & (1 << 15)))) { link_up = 1; vars->line_speed = ELINK_SPEED_10000; - PMD_DRV_LOG(DEBUG, "port %x: External link up in 10G", + PMD_DRV_LOG(DEBUG, sc, "port %x: External link up in 10G", params->port); } else if ((link_status & (1 << 1)) && (!(link_status & (1 << 14)))) { link_up = 1; vars->line_speed = ELINK_SPEED_2500; - PMD_DRV_LOG(DEBUG, "port %x: External link up in 2.5G", + PMD_DRV_LOG(DEBUG, sc, "port %x: External link up in 2.5G", params->port); } else if ((link_status & (1 << 0)) && (!(link_status & (1 << 13)))) { link_up = 1; vars->line_speed = ELINK_SPEED_1000; - PMD_DRV_LOG(DEBUG, "port %x: External link up in 1G", + PMD_DRV_LOG(DEBUG, sc, "port %x: External link up in 1G", params->port); } else { link_up = 0; - PMD_DRV_LOG(DEBUG, "port %x: External link is down", + PMD_DRV_LOG(DEBUG, sc, "port %x: External link is down", params->port); } @@ -7053,7 +7058,7 @@ static uint8_t elink_8073_read_status(struct elink_phy *phy, * when it`s in 10G mode. */ if (vars->line_speed == ELINK_SPEED_1000) { - PMD_DRV_LOG(DEBUG, "Swapping 1G polarity for" + PMD_DRV_LOG(DEBUG, sc, "Swapping 1G polarity for" "the 8073"); val1 |= (1 << 3); } else @@ -7092,7 +7097,7 @@ static void elink_8073_link_reset(__rte_unused struct elink_phy *phy, gpio_port = SC_PATH(sc); else gpio_port = params->port; - PMD_DRV_LOG(DEBUG, "Setting 8073 port %d into low power mode", + PMD_DRV_LOG(DEBUG, sc, "Setting 8073 port %d into low power mode", gpio_port); elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_2, MISC_REGISTERS_GPIO_OUTPUT_LOW, gpio_port); @@ -7107,7 +7112,7 @@ static uint8_t elink_8705_config_init(struct elink_phy *phy, *vars) { struct bnx2x_softc *sc = params->sc; - PMD_DRV_LOG(DEBUG, "init 8705"); + PMD_DRV_LOG(DEBUG, sc, "init 8705"); /* Restore normal power mode */ elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_2, MISC_REGISTERS_GPIO_OUTPUT_HIGH, params->port); @@ -7135,21 +7140,21 @@ static uint8_t elink_8705_read_status(struct elink_phy *phy, uint8_t link_up = 0; uint16_t val1, rx_sd; struct bnx2x_softc *sc = params->sc; - PMD_DRV_LOG(DEBUG, "read status 8705"); + PMD_DRV_LOG(DEBUG, sc, "read status 8705"); elink_cl45_read(sc, phy, MDIO_WIS_DEVAD, MDIO_WIS_REG_LASI_STATUS, &val1); - PMD_DRV_LOG(DEBUG, "8705 LASI status 0x%x", val1); + PMD_DRV_LOG(DEBUG, sc, "8705 LASI status 0x%x", val1); elink_cl45_read(sc, phy, MDIO_WIS_DEVAD, MDIO_WIS_REG_LASI_STATUS, &val1); - PMD_DRV_LOG(DEBUG, "8705 LASI status 0x%x", val1); + PMD_DRV_LOG(DEBUG, sc, "8705 LASI status 0x%x", val1); elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_SD, &rx_sd); elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, 0xc809, &val1); elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, 0xc809, &val1); - PMD_DRV_LOG(DEBUG, "8705 1.c809 val=0x%x", val1); + PMD_DRV_LOG(DEBUG, sc, "8705 1.c809 val=0x%x", val1); link_up = ((rx_sd & 0x1) && (val1 & (1 << 9)) && ((val1 & (1 << 8)) == 0)); if (link_up) { @@ -7173,13 +7178,13 @@ static void elink_set_disable_pmd_transmit(struct elink_params *params, if (pmd_dis) { if (params->feature_config_flags & ELINK_FEATURE_CONFIG_BC_SUPPORTS_SFP_TX_DISABLED) { - PMD_DRV_LOG(DEBUG, "Disabling PMD transmitter"); + PMD_DRV_LOG(DEBUG, sc, "Disabling PMD transmitter"); } else { - PMD_DRV_LOG(DEBUG, "NOT disabling PMD transmitter"); + PMD_DRV_LOG(DEBUG, sc, "NOT disabling PMD transmitter"); return; } } else { - PMD_DRV_LOG(DEBUG, "Enabling PMD transmitter"); + PMD_DRV_LOG(DEBUG, sc, "Enabling PMD transmitter"); } elink_cl45_write(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_TX_DISABLE, pmd_dis); @@ -7213,7 +7218,7 @@ static void elink_sfp_e1e2_set_transmitter(struct elink_params *params, offsetof(struct shmem_region, dev_info.port_hw_config[port].sfp_ctrl)) & PORT_HW_CFG_TX_LASER_MASK; - PMD_DRV_LOG(DEBUG, "Setting transmitter tx_en=%x for port %x " + PMD_DRV_LOG(DEBUG, sc, "Setting transmitter tx_en=%x for port %x " "mode = %x", tx_en, port, tx_en_mode); switch (tx_en_mode) { case PORT_HW_CFG_TX_LASER_MDIO: @@ -7249,7 +7254,8 @@ static void elink_sfp_e1e2_set_transmitter(struct elink_params *params, break; } default: - PMD_DRV_LOG(DEBUG, "Invalid TX_LASER_MDIO 0x%x", tx_en_mode); + PMD_DRV_LOG(DEBUG, sc, + "Invalid TX_LASER_MDIO 0x%x", tx_en_mode); break; } } @@ -7258,7 +7264,7 @@ static void elink_sfp_set_transmitter(struct elink_params *params, struct elink_phy *phy, uint8_t tx_en) { struct bnx2x_softc *sc = params->sc; - PMD_DRV_LOG(DEBUG, "Setting SFP+ transmitter to %d", tx_en); + PMD_DRV_LOG(DEBUG, sc, "Setting SFP+ transmitter to %d", tx_en); if (CHIP_IS_E3(sc)) elink_sfp_e3_set_transmitter(params, phy, tx_en); else @@ -7279,7 +7285,7 @@ static elink_status_t elink_8726_read_sfp_module_eeprom(struct elink_phy *phy, uint16_t val = 0; uint16_t i; if (byte_cnt > ELINK_SFP_EEPROM_PAGE_SIZE) { - PMD_DRV_LOG(DEBUG, "Reading from eeprom is limited to 0xf"); + PMD_DRV_LOG(DEBUG, sc, "Reading from eeprom is limited to 0xf"); return ELINK_STATUS_ERROR; } /* Set the read command byte count */ @@ -7310,7 +7316,7 @@ static elink_status_t elink_8726_read_sfp_module_eeprom(struct elink_phy *phy, if ((val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK) != MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_COMPLETE) { - PMD_DRV_LOG(DEBUG, + PMD_DRV_LOG(DEBUG, sc, "Got bad status 0x%x when reading from SFP+ EEPROM", (val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK)); return ELINK_STATUS_ERROR; @@ -7351,7 +7357,7 @@ static void elink_warpcore_power_module(struct elink_params *params, if (pin_cfg == PIN_CFG_NA) return; - PMD_DRV_LOG(DEBUG, "Setting SFP+ module power to %d using pin cfg %d", + PMD_DRV_LOG(DEBUG, sc, "Setting SFP+ module power to %d using pin cfg %d", power, pin_cfg); /* Low ==> corresponding SFP+ module is powered * high ==> the SFP+ module is powered down @@ -7376,7 +7382,7 @@ static elink_status_t elink_warpcore_read_sfp_module_eeprom(__rte_unused struct struct bnx2x_softc *sc = params->sc; if (byte_cnt > ELINK_SFP_EEPROM_PAGE_SIZE) { - PMD_DRV_LOG(DEBUG, + PMD_DRV_LOG(DEBUG, sc, "Reading from eeprom is limited to 16 bytes"); return ELINK_STATUS_ERROR; } @@ -7418,7 +7424,7 @@ static elink_status_t elink_8727_read_sfp_module_eeprom(struct elink_phy *phy, uint16_t val, i; if (byte_cnt > ELINK_SFP_EEPROM_PAGE_SIZE) { - PMD_DRV_LOG(DEBUG, "Reading from eeprom is limited to 0xf"); + PMD_DRV_LOG(DEBUG, sc, "Reading from eeprom is limited to 0xf"); return ELINK_STATUS_ERROR; } @@ -7472,7 +7478,7 @@ static elink_status_t elink_8727_read_sfp_module_eeprom(struct elink_phy *phy, if ((val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK) != MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_COMPLETE) { - PMD_DRV_LOG(DEBUG, + PMD_DRV_LOG(DEBUG, sc, "Got bad status 0x%x when reading from SFP+ EEPROM", (val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK)); return ELINK_STATUS_TIMEOUT; @@ -7513,7 +7519,8 @@ static elink_status_t elink_read_sfp_module_eeprom(struct elink_phy *phy, read_sfp_module_eeprom_func_p read_func; if ((dev_addr != 0xa0) && (dev_addr != 0xa2)) { - PMD_DRV_LOG(DEBUG, "invalid dev_addr 0x%x", dev_addr); + PMD_DRV_LOG(DEBUG, params->sc, + "invalid dev_addr 0x%x", dev_addr); return ELINK_STATUS_ERROR; } @@ -7559,7 +7566,7 @@ static elink_status_t elink_get_edc_mode(struct elink_phy *phy, ELINK_I2C_DEV_ADDR_A0, ELINK_SFP_EEPROM_CON_TYPE_ADDR, 2, (uint8_t *) val) != 0) { - PMD_DRV_LOG(DEBUG, "Failed to read from SFP+ module EEPROM"); + PMD_DRV_LOG(DEBUG, sc, "Failed to read from SFP+ module EEPROM"); return ELINK_STATUS_ERROR; } @@ -7578,7 +7585,7 @@ static elink_status_t elink_get_edc_mode(struct elink_phy *phy, 1, &copper_module_type) != 0) { - PMD_DRV_LOG(DEBUG, + PMD_DRV_LOG(DEBUG, sc, "Failed to read copper-cable-type" " from SFP+ EEPROM"); return ELINK_STATUS_ERROR; @@ -7586,7 +7593,7 @@ static elink_status_t elink_get_edc_mode(struct elink_phy *phy, if (copper_module_type & ELINK_SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_ACTIVE) { - PMD_DRV_LOG(DEBUG, + PMD_DRV_LOG(DEBUG, sc, "Active Copper cable detected"); if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) @@ -7596,11 +7603,11 @@ static elink_status_t elink_get_edc_mode(struct elink_phy *phy, } else if (copper_module_type & ELINK_SFP_EEPROM_FC_TX_TECH_BITMASK_COPPER_PASSIVE) { - PMD_DRV_LOG(DEBUG, + PMD_DRV_LOG(DEBUG, sc, "Passive Copper cable detected"); *edc_mode = ELINK_EDC_MODE_PASSIVE_DAC; } else { - PMD_DRV_LOG(DEBUG, + PMD_DRV_LOG(DEBUG, sc, "Unknown copper-cable-type 0x%x !!!", copper_module_type); return ELINK_STATUS_ERROR; @@ -7613,7 +7620,7 @@ static elink_status_t elink_get_edc_mode(struct elink_phy *phy, if ((val[1] & (ELINK_SFP_EEPROM_COMP_CODE_SR_MASK | ELINK_SFP_EEPROM_COMP_CODE_LR_MASK | ELINK_SFP_EEPROM_COMP_CODE_LRM_MASK)) == 0) { - PMD_DRV_LOG(DEBUG, "1G SFP module detected"); + PMD_DRV_LOG(DEBUG, sc, "1G SFP module detected"); gport = params->port; phy->media_type = ELINK_ETH_PHY_SFP_1G_FIBER; if (phy->req_line_speed != ELINK_SPEED_1000) { @@ -7629,7 +7636,7 @@ static elink_status_t elink_get_edc_mode(struct elink_phy *phy, } } else { int idx, cfg_idx = 0; - PMD_DRV_LOG(DEBUG, "10G Optic module detected"); + PMD_DRV_LOG(DEBUG, sc, "10G Optic module detected"); for (idx = ELINK_INT_PHY; idx < ELINK_MAX_PHYS; idx++) { if (params->phy[idx].type == phy->type) { cfg_idx = ELINK_LINK_CONFIG_IDX(idx); @@ -7641,7 +7648,7 @@ static elink_status_t elink_get_edc_mode(struct elink_phy *phy, } break; default: - PMD_DRV_LOG(DEBUG, "Unable to determine module type 0x%x !!!", + PMD_DRV_LOG(DEBUG, sc, "Unable to determine module type 0x%x !!!", val[0]); return ELINK_STATUS_ERROR; } @@ -7671,7 +7678,7 @@ static elink_status_t elink_get_edc_mode(struct elink_phy *phy, ELINK_SFP_EEPROM_OPTIONS_ADDR, ELINK_SFP_EEPROM_OPTIONS_SIZE, options) != 0) { - PMD_DRV_LOG(DEBUG, + PMD_DRV_LOG(DEBUG, sc, "Failed to read Option field from module EEPROM"); return ELINK_STATUS_ERROR; } @@ -7680,7 +7687,7 @@ static elink_status_t elink_get_edc_mode(struct elink_phy *phy, else *edc_mode = ELINK_EDC_MODE_LIMITING; } - PMD_DRV_LOG(DEBUG, "EDC mode is set to 0x%x", *edc_mode); + PMD_DRV_LOG(DEBUG, sc, "EDC mode is set to 0x%x", *edc_mode); return ELINK_STATUS_OK; } @@ -7702,7 +7709,7 @@ static elink_status_t elink_verify_sfp_module(struct elink_phy *phy, config)); if ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) == PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_NO_ENFORCEMENT) { - PMD_DRV_LOG(DEBUG, "NOT enforcing module verification"); + PMD_DRV_LOG(DEBUG, sc, "NOT enforcing module verification"); return ELINK_STATUS_OK; } @@ -7714,21 +7721,21 @@ static elink_status_t elink_verify_sfp_module(struct elink_phy *phy, ELINK_FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY) { /* Use first phy request only in case of non-dual media */ if (ELINK_DUAL_MEDIA(params)) { - PMD_DRV_LOG(DEBUG, + PMD_DRV_LOG(DEBUG, sc, "FW does not support OPT MDL verification"); return ELINK_STATUS_ERROR; } cmd = DRV_MSG_CODE_VRFY_FIRST_PHY_OPT_MDL; } else { /* No support in OPT MDL detection */ - PMD_DRV_LOG(DEBUG, "FW does not support OPT MDL verification"); + PMD_DRV_LOG(DEBUG, sc, "FW does not support OPT MDL verification"); return ELINK_STATUS_ERROR; } fw_cmd_param = ELINK_FW_PARAM_SET(phy->addr, phy->type, phy->mdio_ctrl); fw_resp = elink_cb_fw_command(sc, cmd, fw_cmd_param); if (fw_resp == FW_MSG_CODE_VRFY_OPT_MDL_SUCCESS) { - PMD_DRV_LOG(DEBUG, "Approved module"); + PMD_DRV_LOG(DEBUG, sc, "Approved module"); return ELINK_STATUS_OK; } @@ -7784,7 +7791,7 @@ static elink_status_t elink_wait_for_sfp_module_initialized(struct elink_phy ELINK_I2C_DEV_ADDR_A0, 1, 1, &val); if (rc == 0) { - PMD_DRV_LOG(DEBUG, + PMD_DRV_LOG(DEBUG, params->sc, "SFP+ module initialization took %d ms", timeout * 5); return ELINK_STATUS_OK; @@ -7835,17 +7842,18 @@ static elink_status_t elink_8726_set_limiting_mode(struct bnx2x_softc *sc, elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_ROM_VER2, &cur_limiting_mode); - PMD_DRV_LOG(DEBUG, "Current Limiting mode is 0x%x", cur_limiting_mode); + PMD_DRV_LOG(DEBUG, sc, + "Current Limiting mode is 0x%x", cur_limiting_mode); if (edc_mode == ELINK_EDC_MODE_LIMITING) { - PMD_DRV_LOG(DEBUG, "Setting LIMITING MODE"); + PMD_DRV_LOG(DEBUG, sc, "Setting LIMITING MODE"); elink_cl45_write(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_ROM_VER2, ELINK_EDC_MODE_LIMITING); } else { /* LRM mode ( default ) */ - PMD_DRV_LOG(DEBUG, "Setting LRM MODE"); + PMD_DRV_LOG(DEBUG, sc, "Setting LRM MODE"); /* Changing to LRM mode takes quite few seconds. So do it only * if current mode is limiting (default is LRM) @@ -7935,7 +7943,7 @@ static void elink_8727_specific_func(struct elink_phy *phy, val); break; default: - PMD_DRV_LOG(DEBUG, "Function 0x%x not supported by 8727", + PMD_DRV_LOG(DEBUG, sc, "Function 0x%x not supported by 8727", action); return; } @@ -7963,14 +7971,14 @@ static void elink_set_e1e2_module_fault_led(struct elink_params *params, uint8_t gpio_port = elink_get_gpio_port(params); uint16_t gpio_pin = fault_led_gpio - PORT_HW_CFG_FAULT_MODULE_LED_GPIO0; - PMD_DRV_LOG(DEBUG, "Set fault module-detected led " + PMD_DRV_LOG(DEBUG, sc, "Set fault module-detected led " "pin %x port %x mode %x", gpio_pin, gpio_port, gpio_mode); elink_cb_gpio_write(sc, gpio_pin, gpio_mode, gpio_port); } break; default: - PMD_DRV_LOG(DEBUG, "Error: Invalid fault led mode 0x%x", + PMD_DRV_LOG(DEBUG, sc, "Error: Invalid fault led mode 0x%x", fault_led_gpio); } } @@ -7986,7 +7994,7 @@ static void elink_set_e3_module_fault_led(struct elink_params *params, dev_info.port_hw_config[port].e3_sfp_ctrl)) & PORT_HW_CFG_E3_FAULT_MDL_LED_MASK) >> PORT_HW_CFG_E3_FAULT_MDL_LED_SHIFT; - PMD_DRV_LOG(DEBUG, "Setting Fault LED to %d using pin cfg %d", + PMD_DRV_LOG(DEBUG, sc, "Setting Fault LED to %d using pin cfg %d", gpio_mode, pin_cfg); elink_set_cfg_pin(sc, pin_cfg, gpio_mode); } @@ -7995,7 +8003,8 @@ static void elink_set_sfp_module_fault_led(struct elink_params *params, uint8_t gpio_mode) { struct bnx2x_softc *sc = params->sc; - PMD_DRV_LOG(DEBUG, "Setting SFP+ module fault LED to %d", gpio_mode); + PMD_DRV_LOG(DEBUG, sc, + "Setting SFP+ module fault LED to %d", gpio_mode); if (CHIP_IS_E3(sc)) { /* Low ==> if SFP+ module is supported otherwise * High ==> if SFP+ module is not on the approved vendor list @@ -8022,7 +8031,7 @@ static void elink_warpcore_hw_reset(__rte_unused struct elink_phy *phy, static void elink_power_sfp_module(struct elink_params *params, struct elink_phy *phy, uint8_t power) { - PMD_DRV_LOG(DEBUG, "Setting SFP+ power to %x", power); + PMD_DRV_LOG(DEBUG, params->sc, "Setting SFP+ power to %x", power); switch (phy->type) { case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8727: @@ -8108,16 +8117,16 @@ static elink_status_t elink_sfp_module_detection(struct elink_phy *phy, config)); /* Enabled transmitter by default */ elink_sfp_set_transmitter(params, phy, 1); - PMD_DRV_LOG(DEBUG, "SFP+ module plugged in/out detected on port %d", + PMD_DRV_LOG(DEBUG, sc, "SFP+ module plugged in/out detected on port %d", params->port); /* Power up module */ elink_power_sfp_module(params, phy, 1); if (elink_get_edc_mode(phy, params, &edc_mode) != 0) { - PMD_DRV_LOG(DEBUG, "Failed to get valid module type"); + PMD_DRV_LOG(DEBUG, sc, "Failed to get valid module type"); return ELINK_STATUS_ERROR; } else if (elink_verify_sfp_module(phy, params) != 0) { /* Check SFP+ module compatibility */ - PMD_DRV_LOG(DEBUG, "Module verification failed!!"); + PMD_DRV_LOG(DEBUG, sc, "Module verification failed!!"); rc = ELINK_STATUS_ERROR; /* Turn on fault module-detected led */ elink_set_sfp_module_fault_led(params, @@ -8126,7 +8135,7 @@ static elink_status_t elink_sfp_module_detection(struct elink_phy *phy, /* Check if need to power down the SFP+ module */ if ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) == PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_POWER_DOWN) { - PMD_DRV_LOG(DEBUG, "Shutdown SFP+ module!!"); + PMD_DRV_LOG(DEBUG, sc, "Shutdown SFP+ module!!"); elink_power_sfp_module(params, phy, 0); return rc; } @@ -8167,7 +8176,7 @@ void elink_handle_module_detect_int(struct elink_params *params) if (elink_get_mod_abs_int_cfg(sc, params->shmem_base, params->port, &gpio_num, &gpio_port) == ELINK_STATUS_ERROR) { - PMD_DRV_LOG(DEBUG, "Failed to get MOD_ABS interrupt config"); + PMD_DRV_LOG(DEBUG, sc, "Failed to get MOD_ABS interrupt config"); return; } @@ -8207,7 +8216,7 @@ void elink_handle_module_detect_int(struct elink_params *params) } } } else { - PMD_DRV_LOG(DEBUG, "SFP+ module is not initialized"); + PMD_DRV_LOG(DEBUG, sc, "SFP+ module is not initialized"); } } else { elink_cb_gpio_int_write(sc, gpio_num, @@ -8252,7 +8261,7 @@ static uint8_t elink_8706_8726_read_status(struct elink_phy *phy, uint8_t link_up = 0; uint16_t val1, val2, rx_sd, pcs_status; struct bnx2x_softc *sc = params->sc; - PMD_DRV_LOG(DEBUG, "XGXS 8706/8726"); + PMD_DRV_LOG(DEBUG, sc, "XGXS 8706/8726"); /* Clear RX Alarm */ elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXSTAT, &val2); @@ -8262,7 +8271,8 @@ static uint8_t elink_8706_8726_read_status(struct elink_phy *phy, /* Clear LASI indication */ elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val1); elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val2); - PMD_DRV_LOG(DEBUG, "8706/8726 LASI status 0x%x--> 0x%x", val1, val2); + PMD_DRV_LOG(DEBUG, sc, + "8706/8726 LASI status 0x%x--> 0x%x", val1, val2); elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_RX_SD, &rx_sd); elink_cl45_read(sc, phy, @@ -8270,7 +8280,7 @@ static uint8_t elink_8706_8726_read_status(struct elink_phy *phy, elink_cl45_read(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_LINK_STATUS, &val2); elink_cl45_read(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_LINK_STATUS, &val2); - PMD_DRV_LOG(DEBUG, "8706/8726 rx_sd 0x%x pcs_status 0x%x 1Gbps" + PMD_DRV_LOG(DEBUG, sc, "8706/8726 rx_sd 0x%x pcs_status 0x%x 1Gbps" " link_status 0x%x", rx_sd, pcs_status, val2); /* Link is up if both bit 0 of pmd_rx_sd and bit 0 of pcs_status * are set, or if the autoneg bit 1 is set @@ -8324,7 +8334,7 @@ static uint8_t elink_8706_config_init(struct elink_phy *phy, break; DELAY(1000 * 10); } - PMD_DRV_LOG(DEBUG, "XGXS 8706 is initialized after %d ms", cnt); + PMD_DRV_LOG(DEBUG, sc, "XGXS 8706 is initialized after %d ms", cnt); if ((params->feature_config_flags & ELINK_FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED)) { uint8_t i; @@ -8338,14 +8348,14 @@ static uint8_t elink_8706_config_init(struct elink_phy *phy, val &= ~0x7; /* Set control bits according to configuration */ val |= (phy->rx_preemphasis[i] & 0x7); - PMD_DRV_LOG(DEBUG, "Setting RX Equalizer to BNX2X8706" + PMD_DRV_LOG(DEBUG, sc, "Setting RX Equalizer to BNX2X8706" " reg 0x%x <-- val 0x%x", reg, val); elink_cl45_write(sc, phy, MDIO_XS_DEVAD, reg, val); } } /* Force speed */ if (phy->req_line_speed == ELINK_SPEED_10000) { - PMD_DRV_LOG(DEBUG, "XGXS 8706 force 10Gbps"); + PMD_DRV_LOG(DEBUG, sc, "XGXS 8706 force 10Gbps"); elink_cl45_write(sc, phy, MDIO_PMA_DEVAD, @@ -8359,7 +8369,7 @@ static uint8_t elink_8706_config_init(struct elink_phy *phy, /* Force 1Gbps using autoneg with 1G advertisement */ /* Allow CL37 through CL73 */ - PMD_DRV_LOG(DEBUG, "XGXS 8706 AutoNeg"); + PMD_DRV_LOG(DEBUG, sc, "XGXS 8706 AutoNeg"); elink_cl45_write(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_CL37_CL73, 0x040c); @@ -8394,7 +8404,7 @@ static uint8_t elink_8706_config_init(struct elink_phy *phy, & PORT_HW_CFG_TX_LASER_MASK; if (tx_en_mode == PORT_HW_CFG_TX_LASER_GPIO0) { - PMD_DRV_LOG(DEBUG, "Enabling TXONOFF_PWRDN_DIS"); + PMD_DRV_LOG(DEBUG, sc, "Enabling TXONOFF_PWRDN_DIS"); elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_DIGITAL_CTRL, &tmp1); @@ -8421,7 +8431,7 @@ static void elink_8726_config_loopback(struct elink_phy *phy, struct elink_params *params) { struct bnx2x_softc *sc = params->sc; - PMD_DRV_LOG(DEBUG, "PMA/PMD ext_phy_loopback: 8726"); + PMD_DRV_LOG(DEBUG, sc, "PMA/PMD ext_phy_loopback: 8726"); elink_cl45_write(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0x0001); } @@ -8473,7 +8483,7 @@ static uint8_t elink_8726_read_status(struct elink_phy *phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_PHY_IDENTIFIER, &val1); if (val1 & (1 << 15)) { - PMD_DRV_LOG(DEBUG, "Tx is disabled"); + PMD_DRV_LOG(DEBUG, sc, "Tx is disabled"); link_up = 0; vars->line_speed = 0; } @@ -8486,7 +8496,7 @@ static uint8_t elink_8726_config_init(struct elink_phy *phy, struct elink_vars *vars) { struct bnx2x_softc *sc = params->sc; - PMD_DRV_LOG(DEBUG, "Initializing BNX2X8726"); + PMD_DRV_LOG(DEBUG, sc, "Initializing BNX2X8726"); elink_cl45_write(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 1 << 15); elink_wait_reset_complete(sc, phy, params); @@ -8501,7 +8511,7 @@ static uint8_t elink_8726_config_init(struct elink_phy *phy, elink_sfp_module_detection(phy, params); if (phy->req_line_speed == ELINK_SPEED_1000) { - PMD_DRV_LOG(DEBUG, "Setting 1G force"); + PMD_DRV_LOG(DEBUG, sc, "Setting 1G force"); elink_cl45_write(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0x40); elink_cl45_write(sc, phy, @@ -8516,7 +8526,7 @@ static uint8_t elink_8726_config_init(struct elink_phy *phy, ((phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) != PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) { - PMD_DRV_LOG(DEBUG, "Setting 1G clause37"); + PMD_DRV_LOG(DEBUG, sc, "Setting 1G clause37"); /* Set Flow control */ elink_ext_phy_set_pause(params, phy, vars); elink_cl45_write(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_ADV, 0x20); @@ -8544,7 +8554,7 @@ static uint8_t elink_8726_config_init(struct elink_phy *phy, /* Set TX PreEmphasis if needed */ if ((params->feature_config_flags & ELINK_FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED)) { - PMD_DRV_LOG(DEBUG, + PMD_DRV_LOG(DEBUG, sc, "Setting TX_CTRL1 0x%x, TX_CTRL2 0x%x", phy->tx_preemphasis[0], phy->tx_preemphasis[1]); elink_cl45_write(sc, phy, @@ -8566,7 +8576,7 @@ static void elink_8726_link_reset(struct elink_phy *phy, struct elink_params *params) { struct bnx2x_softc *sc = params->sc; - PMD_DRV_LOG(DEBUG, "elink_8726_link_reset port %d", params->port); + PMD_DRV_LOG(DEBUG, sc, "elink_8726_link_reset port %d", params->port); /* Set serial boot control for external load */ elink_cl45_write(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_GEN_CTRL, 0x0001); @@ -8639,14 +8649,14 @@ static void elink_8727_config_speed(struct elink_phy *phy, /* Set option 1G speed */ if ((phy->req_line_speed == ELINK_SPEED_1000) || (phy->media_type == ELINK_ETH_PHY_SFP_1G_FIBER)) { - PMD_DRV_LOG(DEBUG, "Setting 1G force"); + PMD_DRV_LOG(DEBUG, sc, "Setting 1G force"); elink_cl45_write(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0x40); elink_cl45_write(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_10G_CTRL2, 0xD); elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_10G_CTRL2, &tmp1); - PMD_DRV_LOG(DEBUG, "1.7 = 0x%x", tmp1); + PMD_DRV_LOG(DEBUG, sc, "1.7 = 0x%x", tmp1); /* Power down the XAUI until link is up in case of dual-media * and 1G */ @@ -8666,7 +8676,7 @@ static void elink_8727_config_speed(struct elink_phy *phy, PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) != PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) { - PMD_DRV_LOG(DEBUG, "Setting 1G clause37"); + PMD_DRV_LOG(DEBUG, sc, "Setting 1G clause37"); elink_cl45_write(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_8727_MISC_CTRL, 0); elink_cl45_write(sc, phy, @@ -8700,7 +8710,7 @@ static uint8_t elink_8727_config_init(struct elink_phy *phy, elink_wait_reset_complete(sc, phy, params); - PMD_DRV_LOG(DEBUG, "Initializing BNX2X8727"); + PMD_DRV_LOG(DEBUG, sc, "Initializing BNX2X8727"); elink_8727_specific_func(phy, params, ELINK_PHY_INIT); /* Initially configure MOD_ABS to interrupt when module is @@ -8733,7 +8743,7 @@ static uint8_t elink_8727_config_init(struct elink_phy *phy, /* Set TX PreEmphasis if needed */ if ((params->feature_config_flags & ELINK_FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED)) { - PMD_DRV_LOG(DEBUG, "Setting TX_CTRL1 0x%x, TX_CTRL2 0x%x", + PMD_DRV_LOG(DEBUG, sc, "Setting TX_CTRL1 0x%x, TX_CTRL2 0x%x", phy->tx_preemphasis[0], phy->tx_preemphasis[1]); elink_cl45_write(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_TX_CTRL1, @@ -8755,7 +8765,7 @@ static uint8_t elink_8727_config_init(struct elink_phy *phy, if (tx_en_mode == PORT_HW_CFG_TX_LASER_GPIO0) { - PMD_DRV_LOG(DEBUG, "Enabling TXONOFF_PWRDN_DIS"); + PMD_DRV_LOG(DEBUG, sc, "Enabling TXONOFF_PWRDN_DIS"); elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_OPT_CFG_REG, &tmp2); @@ -8787,7 +8797,7 @@ static void elink_8727_handle_mod_abs(struct elink_phy *phy, if (mod_abs & (1 << 8)) { /* Module is absent */ - PMD_DRV_LOG(DEBUG, "MOD_ABS indication show module is absent"); + PMD_DRV_LOG(DEBUG, sc, "MOD_ABS indication show module is absent"); phy->media_type = ELINK_ETH_PHY_NOT_PRESENT; /* 1. Set mod_abs to detect next module * presence event @@ -8812,7 +8822,7 @@ static void elink_8727_handle_mod_abs(struct elink_phy *phy, } else { /* Module is present */ - PMD_DRV_LOG(DEBUG, "MOD_ABS indication show module is present"); + PMD_DRV_LOG(DEBUG, sc, "MOD_ABS indication show module is present"); /* First disable transmitter, and if the module is ok, the * module_detection will enable it * 1. Set mod_abs to detect next module absent event ( bit 8) @@ -8843,14 +8853,14 @@ static void elink_8727_handle_mod_abs(struct elink_phy *phy, if (elink_wait_for_sfp_module_initialized(phy, params) == 0) { elink_sfp_module_detection(phy, params); } else { - PMD_DRV_LOG(DEBUG, "SFP+ module is not initialized"); + PMD_DRV_LOG(DEBUG, sc, "SFP+ module is not initialized"); } /* Reconfigure link speed based on module type limitations */ elink_8727_config_speed(phy, params); } - PMD_DRV_LOG(DEBUG, "8727 RX_ALARM_STATUS 0x%x", rx_alarm_status); + PMD_DRV_LOG(DEBUG, sc, "8727 RX_ALARM_STATUS 0x%x", rx_alarm_status); /* No need to check link status in case of module plugged in/out */ } @@ -8873,14 +8883,14 @@ static uint8_t elink_8727_read_status(struct elink_phy *phy, elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_RXSTAT, &rx_alarm_status); vars->line_speed = 0; - PMD_DRV_LOG(DEBUG, "8727 RX_ALARM_STATUS 0x%x", rx_alarm_status); + PMD_DRV_LOG(DEBUG, sc, "8727 RX_ALARM_STATUS 0x%x", rx_alarm_status); elink_sfp_mask_fault(sc, phy, MDIO_PMA_LASI_TXSTAT, MDIO_PMA_LASI_TXCTRL); elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val1); - PMD_DRV_LOG(DEBUG, "8727 LASI status 0x%x", val1); + PMD_DRV_LOG(DEBUG, sc, "8727 LASI status 0x%x", val1); /* Clear MSG-OUT */ elink_cl45_read(sc, phy, @@ -8898,7 +8908,7 @@ static uint8_t elink_8727_read_status(struct elink_phy *phy, if ((val1 & (1 << 8)) == 0) { if (!CHIP_IS_E1x(sc)) oc_port = SC_PATH(sc) + (params->port << 1); - PMD_DRV_LOG(DEBUG, + PMD_DRV_LOG(DEBUG, sc, "8727 Power fault has been detected on port %d", oc_port); elink_cb_event_log(sc, ELINK_LOG_ID_OVER_CURRENT, oc_port); //"Error: Power fault on Port %d has " @@ -8941,10 +8951,10 @@ static uint8_t elink_8727_read_status(struct elink_phy *phy, } if (!(phy->flags & ELINK_FLAGS_SFP_NOT_APPROVED)) { - PMD_DRV_LOG(DEBUG, "Enabling 8727 TX laser"); + PMD_DRV_LOG(DEBUG, sc, "Enabling 8727 TX laser"); elink_sfp_set_transmitter(params, phy, 1); } else { - PMD_DRV_LOG(DEBUG, "Tx is disabled"); + PMD_DRV_LOG(DEBUG, sc, "Tx is disabled"); return 0; } @@ -8958,16 +8968,16 @@ static uint8_t elink_8727_read_status(struct elink_phy *phy, if ((link_status & (1 << 2)) && (!(link_status & (1 << 15)))) { link_up = 1; vars->line_speed = ELINK_SPEED_10000; - PMD_DRV_LOG(DEBUG, "port %x: External link up in 10G", + PMD_DRV_LOG(DEBUG, sc, "port %x: External link up in 10G", params->port); } else if ((link_status & (1 << 0)) && (!(link_status & (1 << 13)))) { link_up = 1; vars->line_speed = ELINK_SPEED_1000; - PMD_DRV_LOG(DEBUG, "port %x: External link up in 1G", + PMD_DRV_LOG(DEBUG, sc, "port %x: External link up in 1G", params->port); } else { link_up = 0; - PMD_DRV_LOG(DEBUG, "port %x: External link is down", + PMD_DRV_LOG(DEBUG, sc, "port %x: External link is down", params->port); } @@ -8987,7 +8997,7 @@ static uint8_t elink_8727_read_status(struct elink_phy *phy, if (link_up) { elink_ext_phy_resolve_fc(phy, params, vars); vars->duplex = DUPLEX_FULL; - PMD_DRV_LOG(DEBUG, "duplex = 0x%x", vars->duplex); + PMD_DRV_LOG(DEBUG, sc, "duplex = 0x%x", vars->duplex); } if ((ELINK_DUAL_MEDIA(params)) && @@ -9059,7 +9069,7 @@ static void elink_save_848xx_spirom_version(struct elink_phy *phy, DELAY(5); } if (cnt == 100) { - PMD_DRV_LOG(DEBUG, "Unable to read 848xx " + PMD_DRV_LOG(DEBUG, sc, "Unable to read 848xx " "phy fw version(1)"); elink_save_spirom_version(sc, port, 0, phy->ver_addr); return; @@ -9076,7 +9086,7 @@ static void elink_save_848xx_spirom_version(struct elink_phy *phy, DELAY(5); } if (cnt == 100) { - PMD_DRV_LOG(DEBUG, "Unable to read 848xx phy fw " + PMD_DRV_LOG(DEBUG, sc, "Unable to read 848xx phy fw " "version(2)"); elink_save_spirom_version(sc, port, 0, phy->ver_addr); return; @@ -9189,7 +9199,7 @@ static elink_status_t elink_848xx_cmn_config_init(struct elink_phy *phy, autoneg_val |= (1 << 9 | 1 << 12); if (phy->req_duplex == DUPLEX_FULL) an_1000_val |= (1 << 9); - PMD_DRV_LOG(DEBUG, "Advertising 1G"); + PMD_DRV_LOG(DEBUG, sc, "Advertising 1G"); } else an_1000_val &= ~((1 << 8) | (1 << 9)); @@ -9205,7 +9215,7 @@ static elink_status_t elink_848xx_cmn_config_init(struct elink_phy *phy, */ autoneg_val |= (1 << 9 | 1 << 12); an_10_100_val |= (1 << 8); - PMD_DRV_LOG(DEBUG, "Advertising 100M-FD"); + PMD_DRV_LOG(DEBUG, sc, "Advertising 100M-FD"); } if (phy->speed_cap_mask & @@ -9214,7 +9224,7 @@ static elink_status_t elink_848xx_cmn_config_init(struct elink_phy *phy, */ autoneg_val |= (1 << 9 | 1 << 12); an_10_100_val |= (1 << 7); - PMD_DRV_LOG(DEBUG, "Advertising 100M-HD"); + PMD_DRV_LOG(DEBUG, sc, "Advertising 100M-HD"); } if ((phy->speed_cap_mask & @@ -9222,7 +9232,7 @@ static elink_status_t elink_848xx_cmn_config_init(struct elink_phy *phy, (phy->supported & ELINK_SUPPORTED_10baseT_Full)) { an_10_100_val |= (1 << 6); autoneg_val |= (1 << 9 | 1 << 12); - PMD_DRV_LOG(DEBUG, "Advertising 10M-FD"); + PMD_DRV_LOG(DEBUG, sc, "Advertising 10M-FD"); } if ((phy->speed_cap_mask & @@ -9230,7 +9240,7 @@ static elink_status_t elink_848xx_cmn_config_init(struct elink_phy *phy, (phy->supported & ELINK_SUPPORTED_10baseT_Half)) { an_10_100_val |= (1 << 5); autoneg_val |= (1 << 9 | 1 << 12); - PMD_DRV_LOG(DEBUG, "Advertising 10M-HD"); + PMD_DRV_LOG(DEBUG, sc, "Advertising 10M-HD"); } } @@ -9245,7 +9255,7 @@ static elink_status_t elink_848xx_cmn_config_init(struct elink_phy *phy, (1 << 15 | 1 << 9 | 7 << 0)); /* The PHY needs this set even for forced link. */ an_10_100_val |= (1 << 8) | (1 << 7); - PMD_DRV_LOG(DEBUG, "Setting 100M force"); + PMD_DRV_LOG(DEBUG, sc, "Setting 100M force"); } if ((phy->req_line_speed == ELINK_SPEED_10) && (phy->supported & @@ -9254,7 +9264,7 @@ static elink_status_t elink_848xx_cmn_config_init(struct elink_phy *phy, elink_cl45_write(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_8481_AUX_CTRL, (1 << 15 | 1 << 9 | 7 << 0)); - PMD_DRV_LOG(DEBUG, "Setting 10M force"); + PMD_DRV_LOG(DEBUG, sc, "Setting 10M force"); } elink_cl45_write(sc, phy, @@ -9278,7 +9288,7 @@ static elink_status_t elink_848xx_cmn_config_init(struct elink_phy *phy, (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) || (phy->req_line_speed == ELINK_SPEED_10000)) { - PMD_DRV_LOG(DEBUG, "Advertising 10G"); + PMD_DRV_LOG(DEBUG, sc, "Advertising 10G"); /* Restart autoneg for 10G */ elink_cl45_read_or_write(sc, phy, @@ -9334,7 +9344,7 @@ static elink_status_t elink_84833_cmd_hdlr(struct elink_phy *phy, DELAY(1000 * 1); } if (idx >= PHY84833_CMDHDLR_WAIT) { - PMD_DRV_LOG(DEBUG, "FW cmd: FW not ready."); + PMD_DRV_LOG(DEBUG, sc, "FW cmd: FW not ready."); return ELINK_STATUS_ERROR; } @@ -9356,7 +9366,7 @@ static elink_status_t elink_84833_cmd_hdlr(struct elink_phy *phy, } if ((idx >= PHY84833_CMDHDLR_WAIT) || (val == PHY84833_STATUS_CMD_COMPLETE_ERROR)) { - PMD_DRV_LOG(DEBUG, "FW cmd failed."); + PMD_DRV_LOG(DEBUG, sc, "FW cmd failed."); return ELINK_STATUS_ERROR; } /* Gather returning data */ @@ -9398,7 +9408,7 @@ static elink_status_t elink_84833_pair_swap_cfg(struct elink_phy *phy, PHY84833_CMD_SET_PAIR_SWAP, data, PHY84833_CMDHDLR_MAX_ARGS); if (status == ELINK_STATUS_OK) { - PMD_DRV_LOG(DEBUG, "Pairswap OK, val=0x%x", data[1]); + PMD_DRV_LOG(DEBUG, sc, "Pairswap OK, val=0x%x", data[1]); } return status; @@ -9474,7 +9484,8 @@ static void elink_84833_hw_reset_phy(struct elink_phy *phy, elink_cb_gpio_mult_write(sc, reset_gpios, MISC_REGISTERS_GPIO_OUTPUT_LOW); DELAY(10); - PMD_DRV_LOG(DEBUG, "84833 hw reset on pin values 0x%x", reset_gpios); + PMD_DRV_LOG(DEBUG, sc, + "84833 hw reset on pin values 0x%x", reset_gpios); } static elink_status_t elink_8483x_disable_eee(struct elink_phy *phy, @@ -9484,13 +9495,13 @@ static elink_status_t elink_8483x_disable_eee(struct elink_phy *phy, elink_status_t rc; uint16_t cmd_args = 0; - PMD_DRV_LOG(DEBUG, "Don't Advertise 10GBase-T EEE"); + PMD_DRV_LOG(DEBUG, params->sc, "Don't Advertise 10GBase-T EEE"); /* Prevent Phy from working in EEE and advertising it */ rc = elink_84833_cmd_hdlr(phy, params, PHY84833_CMD_SET_EEE_MODE, &cmd_args, 1); if (rc != ELINK_STATUS_OK) { - PMD_DRV_LOG(DEBUG, "EEE disable failed."); + PMD_DRV_LOG(DEBUG, params->sc, "EEE disable failed."); return rc; } @@ -9507,7 +9518,7 @@ static elink_status_t elink_8483x_enable_eee(struct elink_phy *phy, rc = elink_84833_cmd_hdlr(phy, params, PHY84833_CMD_SET_EEE_MODE, &cmd_args, 1); if (rc != ELINK_STATUS_OK) { - PMD_DRV_LOG(DEBUG, "EEE enable failed."); + PMD_DRV_LOG(DEBUG, params->sc, "EEE enable failed."); return rc; } @@ -9600,7 +9611,7 @@ static uint8_t elink_848x3_config_init(struct elink_phy *phy, elink_cl45_write(sc, phy, MDIO_CTL_DEVAD, MDIO_CTL_REG_84823_MEDIA, val); - PMD_DRV_LOG(DEBUG, "Multi_phy config = 0x%x, Media control = 0x%x", + PMD_DRV_LOG(DEBUG, sc, "Multi_phy config = 0x%x, Media control = 0x%x", params->multi_phy_config, val); if ((phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X84833) || @@ -9616,7 +9627,7 @@ static uint8_t elink_848x3_config_init(struct elink_phy *phy, PHY84833_CMD_SET_EEE_MODE, cmd_args, PHY84833_CMDHDLR_MAX_ARGS); if (rc != ELINK_STATUS_OK) { - PMD_DRV_LOG(DEBUG, "Cfg AutogrEEEn failed."); + PMD_DRV_LOG(DEBUG, sc, "Cfg AutogrEEEn failed."); } } if (initialize) { @@ -9653,7 +9664,7 @@ static uint8_t elink_848x3_config_init(struct elink_phy *phy, elink_eee_has_cap(params)) { rc = elink_eee_initial_config(params, vars, SHMEM_EEE_10G_ADV); if (rc != ELINK_STATUS_OK) { - PMD_DRV_LOG(DEBUG, "Failed to configure EEE timers"); + PMD_DRV_LOG(DEBUG, sc, "Failed to configure EEE timers"); elink_8483x_disable_eee(phy, params, vars); return rc; } @@ -9666,7 +9677,7 @@ static uint8_t elink_848x3_config_init(struct elink_phy *phy, else rc = elink_8483x_disable_eee(phy, params, vars); if (rc != ELINK_STATUS_OK) { - PMD_DRV_LOG(DEBUG, "Failed to set EEE advertisement"); + PMD_DRV_LOG(DEBUG, sc, "Failed to set EEE advertisement"); return rc; } } else { @@ -9698,7 +9709,7 @@ static uint8_t elink_848xx_read_status(struct elink_phy *phy, elink_cl45_read(sc, phy, MDIO_AN_DEVAD, 0xFFFA, &val1); elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_8481_PMD_SIGNAL, &val2); - PMD_DRV_LOG(DEBUG, "BNX2X848xx: PMD_SIGNAL 1.a811 = 0x%x", val2); + PMD_DRV_LOG(DEBUG, sc, "BNX2X848xx: PMD_SIGNAL 1.a811 = 0x%x", val2); /* Check link 10G */ if (val2 & (1 << 11)) { @@ -9720,7 +9731,8 @@ static uint8_t elink_848xx_read_status(struct elink_phy *phy, MDIO_AN_REG_8481_EXPANSION_REG_RD_RW, &legacy_status); - PMD_DRV_LOG(DEBUG, "Legacy speed status = 0x%x", legacy_status); + PMD_DRV_LOG(DEBUG, sc, + "Legacy speed status = 0x%x", legacy_status); link_up = ((legacy_status & (1 << 11)) == (1 << 11)); legacy_speed = (legacy_status & (3 << 9)); if (legacy_speed == (0 << 9)) @@ -9750,7 +9762,7 @@ static uint8_t elink_848xx_read_status(struct elink_phy *phy, else vars->duplex = DUPLEX_HALF; - PMD_DRV_LOG(DEBUG, + PMD_DRV_LOG(DEBUG, sc, "Link is up in %dMbps, is_duplex_full= %d", vars->line_speed, (vars->duplex == DUPLEX_FULL)); @@ -9772,7 +9784,7 @@ static uint8_t elink_848xx_read_status(struct elink_phy *phy, } } if (link_up) { - PMD_DRV_LOG(DEBUG, "BNX2X848x3: link speed is %d", + PMD_DRV_LOG(DEBUG, sc, "BNX2X848x3: link speed is %d", vars->line_speed); elink_ext_phy_resolve_fc(phy, params, vars); @@ -9889,7 +9901,7 @@ static void elink_848xx_set_link_led(struct elink_phy *phy, switch (mode) { case ELINK_LED_MODE_OFF: - PMD_DRV_LOG(DEBUG, "Port 0x%x: LED MODE OFF", port); + PMD_DRV_LOG(DEBUG, sc, "Port 0x%x: LED MODE OFF", port); if ((params->hw_led_mode << SHARED_HW_CFG_LED_MODE_SHIFT) == SHARED_HW_CFG_LED_EXTPHY1) { @@ -9919,7 +9931,8 @@ static void elink_848xx_set_link_led(struct elink_phy *phy, break; case ELINK_LED_MODE_FRONT_PANEL_OFF: - PMD_DRV_LOG(DEBUG, "Port 0x%x: LED MODE FRONT PANEL OFF", port); + PMD_DRV_LOG(DEBUG, sc, + "Port 0x%x: LED MODE FRONT PANEL OFF", port); if ((params->hw_led_mode << SHARED_HW_CFG_LED_MODE_SHIFT) == SHARED_HW_CFG_LED_EXTPHY1) { @@ -9969,7 +9982,7 @@ static void elink_848xx_set_link_led(struct elink_phy *phy, break; case ELINK_LED_MODE_ON: - PMD_DRV_LOG(DEBUG, "Port 0x%x: LED MODE ON", port); + PMD_DRV_LOG(DEBUG, sc, "Port 0x%x: LED MODE ON", port); if ((params->hw_led_mode << SHARED_HW_CFG_LED_MODE_SHIFT) == SHARED_HW_CFG_LED_EXTPHY1) { @@ -10029,7 +10042,7 @@ static void elink_848xx_set_link_led(struct elink_phy *phy, case ELINK_LED_MODE_OPER: - PMD_DRV_LOG(DEBUG, "Port 0x%x: LED MODE OPER", port); + PMD_DRV_LOG(DEBUG, sc, "Port 0x%x: LED MODE OPER", port); if ((params->hw_led_mode << SHARED_HW_CFG_LED_MODE_SHIFT) == SHARED_HW_CFG_LED_EXTPHY1) { @@ -10044,7 +10057,7 @@ static void elink_848xx_set_link_led(struct elink_phy *phy, >> MDIO_PMA_REG_8481_LINK_SIGNAL_LED4_ENABLE_SHIFT)) { - PMD_DRV_LOG(DEBUG, "Setting LINK_SIGNAL"); + PMD_DRV_LOG(DEBUG, sc, "Setting LINK_SIGNAL"); elink_cl45_write(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_8481_LINK_SIGNAL, @@ -10157,7 +10170,7 @@ static uint8_t elink_54618se_config_init(struct elink_phy *phy, uint16_t autoneg_val, an_1000_val, an_10_100_val, fc_val, temp; uint32_t cfg_pin; - PMD_DRV_LOG(DEBUG, "54618SE cfg init"); + PMD_DRV_LOG(DEBUG, sc, "54618SE cfg init"); DELAY(1000 * 1); /* This works with E3 only, no need to check the chip @@ -10230,7 +10243,7 @@ static uint8_t elink_54618se_config_init(struct elink_phy *phy, autoneg_val |= (1 << 9 | 1 << 12); if (phy->req_duplex == DUPLEX_FULL) an_1000_val |= (1 << 9); - PMD_DRV_LOG(DEBUG, "Advertising 1G"); + PMD_DRV_LOG(DEBUG, sc, "Advertising 1G"); } else an_1000_val &= ~((1 << 8) | (1 << 9)); @@ -10243,25 +10256,25 @@ static uint8_t elink_54618se_config_init(struct elink_phy *phy, PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF) { an_10_100_val |= (1 << 5); autoneg_val |= (1 << 9 | 1 << 12); - PMD_DRV_LOG(DEBUG, "Advertising 10M-HD"); + PMD_DRV_LOG(DEBUG, sc, "Advertising 10M-HD"); } if (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF) { an_10_100_val |= (1 << 6); autoneg_val |= (1 << 9 | 1 << 12); - PMD_DRV_LOG(DEBUG, "Advertising 10M-FD"); + PMD_DRV_LOG(DEBUG, sc, "Advertising 10M-FD"); } if (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF) { an_10_100_val |= (1 << 7); autoneg_val |= (1 << 9 | 1 << 12); - PMD_DRV_LOG(DEBUG, "Advertising 100M-HD"); + PMD_DRV_LOG(DEBUG, sc, "Advertising 100M-HD"); } if (phy->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL) { an_10_100_val |= (1 << 8); autoneg_val |= (1 << 9 | 1 << 12); - PMD_DRV_LOG(DEBUG, "Advertising 100M-FD"); + PMD_DRV_LOG(DEBUG, sc, "Advertising 100M-FD"); } } @@ -10270,12 +10283,12 @@ static uint8_t elink_54618se_config_init(struct elink_phy *phy, autoneg_val |= (1 << 13); /* Enabled AUTO-MDIX when autoneg is disabled */ elink_cl22_write(sc, phy, 0x18, (1 << 15 | 1 << 9 | 7 << 0)); - PMD_DRV_LOG(DEBUG, "Setting 100M force"); + PMD_DRV_LOG(DEBUG, sc, "Setting 100M force"); } if (phy->req_line_speed == ELINK_SPEED_10) { /* Enabled AUTO-MDIX when autoneg is disabled */ elink_cl22_write(sc, phy, 0x18, (1 << 15 | 1 << 9 | 7 << 0)); - PMD_DRV_LOG(DEBUG, "Setting 10M force"); + PMD_DRV_LOG(DEBUG, sc, "Setting 10M force"); } if ((phy->flags & ELINK_FLAGS_EEE) && elink_eee_has_cap(params)) { @@ -10290,7 +10303,7 @@ static uint8_t elink_54618se_config_init(struct elink_phy *phy, rc = elink_eee_initial_config(params, vars, SHMEM_EEE_1G_ADV); if (rc != ELINK_STATUS_OK) { - PMD_DRV_LOG(DEBUG, "Failed to configure EEE timers"); + PMD_DRV_LOG(DEBUG, sc, "Failed to configure EEE timers"); elink_eee_disable(phy, params, vars); } else if ((params->eee_mode & ELINK_EEE_MODE_ADV_LPI) && (phy->req_duplex == DUPLEX_FULL) && @@ -10304,7 +10317,7 @@ static uint8_t elink_54618se_config_init(struct elink_phy *phy, elink_eee_advertise(phy, params, vars, SHMEM_EEE_1G_ADV); } else { - PMD_DRV_LOG(DEBUG, "Don't Advertise 1GBase-T EEE"); + PMD_DRV_LOG(DEBUG, sc, "Don't Advertise 1GBase-T EEE"); elink_eee_disable(phy, params, vars); } } else { @@ -10316,10 +10329,10 @@ static uint8_t elink_54618se_config_init(struct elink_phy *phy, if (params->feature_config_flags & ELINK_FEATURE_CONFIG_AUTOGREEEN_ENABLED) { temp = 6; - PMD_DRV_LOG(DEBUG, "Enabling Auto-GrEEEn"); + PMD_DRV_LOG(DEBUG, sc, "Enabling Auto-GrEEEn"); } else { temp = 0; - PMD_DRV_LOG(DEBUG, "Don't Adv. EEE"); + PMD_DRV_LOG(DEBUG, sc, "Don't Adv. EEE"); } elink_cl45_write(sc, phy, MDIO_AN_DEVAD, MDIO_AN_REG_EEE_ADV, temp); @@ -10347,7 +10360,7 @@ static void elink_5461x_set_link_led(struct elink_phy *phy, elink_cl22_read(sc, phy, MDIO_REG_GPHY_SHADOW, &temp); temp &= 0xff00; - PMD_DRV_LOG(DEBUG, "54618x set link led (mode=%x)", mode); + PMD_DRV_LOG(DEBUG, sc, "54618x set link led (mode=%x)", mode); switch (mode) { case ELINK_LED_MODE_FRONT_PANEL_OFF: case ELINK_LED_MODE_OFF: @@ -10405,7 +10418,7 @@ static uint8_t elink_54618se_read_status(struct elink_phy *phy, /* Get speed operation status */ elink_cl22_read(sc, phy, MDIO_REG_GPHY_AUX_STATUS, &legacy_status); - PMD_DRV_LOG(DEBUG, "54618SE read_status: 0x%x", legacy_status); + PMD_DRV_LOG(DEBUG, sc, "54618SE read_status: 0x%x", legacy_status); /* Read status to clear the PHY interrupt. */ elink_cl22_read(sc, phy, MDIO_REG_INTR_STATUS, &val); @@ -10437,7 +10450,7 @@ static uint8_t elink_54618se_read_status(struct elink_phy *phy, } else /* Should not happen */ vars->line_speed = 0; - PMD_DRV_LOG(DEBUG, + PMD_DRV_LOG(DEBUG, sc, "Link is up in %dMbps, is_duplex_full= %d", vars->line_speed, (vars->duplex == DUPLEX_FULL)); @@ -10451,7 +10464,7 @@ static uint8_t elink_54618se_read_status(struct elink_phy *phy, vars->link_status |= LINK_STATUS_PARALLEL_DETECTION_USED; - PMD_DRV_LOG(DEBUG, "BNX2X54618SE: link speed is %d", + PMD_DRV_LOG(DEBUG, sc, "BNX2X54618SE: link speed is %d", vars->line_speed); elink_ext_phy_resolve_fc(phy, params, vars); @@ -10499,7 +10512,7 @@ static void elink_54618se_config_loopback(struct elink_phy *phy, uint16_t val; uint32_t umac_base = params->port ? GRCBASE_UMAC1 : GRCBASE_UMAC0; - PMD_DRV_LOG(DEBUG, "2PMA/PMD ext_phy_loopback: 54618se"); + PMD_DRV_LOG(DEBUG, sc, "2PMA/PMD ext_phy_loopback: 54618se"); /* Enable master/slave manual mmode and set to master */ /* mii write 9 [bits set 11 12] */ @@ -10550,7 +10563,7 @@ static uint8_t elink_7101_config_init(struct elink_phy *phy, { uint16_t fw_ver1, fw_ver2, val; struct bnx2x_softc *sc = params->sc; - PMD_DRV_LOG(DEBUG, "Setting the SFX7101 LASI indication"); + PMD_DRV_LOG(DEBUG, sc, "Setting the SFX7101 LASI indication"); /* Restore normal power mode */ elink_cb_gpio_write(sc, MISC_REGISTERS_GPIO_2, @@ -10560,7 +10573,7 @@ static uint8_t elink_7101_config_init(struct elink_phy *phy, elink_wait_reset_complete(sc, phy, params); elink_cl45_write(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_CTRL, 0x1); - PMD_DRV_LOG(DEBUG, "Setting the SFX7101 LED to blink on traffic"); + PMD_DRV_LOG(DEBUG, sc, "Setting the SFX7101 LED to blink on traffic"); elink_cl45_write(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_7107_LED_CNTL, (1 << 3)); @@ -10591,10 +10604,10 @@ static uint8_t elink_7101_read_status(struct elink_phy *phy, uint16_t val1, val2; elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val2); elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_LASI_STAT, &val1); - PMD_DRV_LOG(DEBUG, "10G-base-T LASI status 0x%x->0x%x", val2, val1); + PMD_DRV_LOG(DEBUG, sc, "10G-base-T LASI status 0x%x->0x%x", val2, val1); elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val2); elink_cl45_read(sc, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_STATUS, &val1); - PMD_DRV_LOG(DEBUG, "10G-base-T PMA status 0x%x->0x%x", val2, val1); + PMD_DRV_LOG(DEBUG, sc, "10G-base-T PMA status 0x%x->0x%x", val2, val1); link_up = ((val1 & 4) == 4); /* If link is up print the AN outcome of the SFX7101 PHY */ if (link_up) { @@ -10603,7 +10616,7 @@ static uint8_t elink_7101_read_status(struct elink_phy *phy, &val2); vars->line_speed = ELINK_SPEED_10000; vars->duplex = DUPLEX_FULL; - PMD_DRV_LOG(DEBUG, "SFX7101 AN status 0x%x->Master=%x", + PMD_DRV_LOG(DEBUG, sc, "SFX7101 AN status 0x%x->Master=%x", val2, (val2 & (1 << 14))); elink_ext_phy_10G_an_resolve(sc, phy, vars); elink_ext_phy_resolve_fc(phy, params, vars); @@ -11210,7 +11223,7 @@ static uint32_t elink_get_ext_phy_config(struct bnx2x_softc *sc, external_phy_config2)); break; default: - PMD_DRV_LOG(DEBUG, "Invalid phy_index %d", phy_index); + PMD_DRV_LOG(DEBUG, sc, "Invalid phy_index %d", phy_index); return ELINK_STATUS_ERROR; } @@ -11233,7 +11246,7 @@ static elink_status_t elink_populate_int_phy(struct bnx2x_softc *sc, (REG_RD(sc, MISC_REG_CHIP_NUM) << 16) | ((REG_RD(sc, MISC_REG_CHIP_REV) & 0xf) << 12); - PMD_DRV_LOG(DEBUG, ":chip_id = 0x%x", chip_id); + PMD_DRV_LOG(DEBUG, sc, ":chip_id = 0x%x", chip_id); if (USES_WARPCORE(sc)) { uint32_t serdes_net_if; phy_addr = REG_RD(sc, MISC_REG_WC0_CTRL_PHY_ADDR); @@ -11310,7 +11323,7 @@ static elink_status_t elink_populate_int_phy(struct bnx2x_softc *sc, phy->flags &= ~ELINK_FLAGS_TX_ERROR_CHECK; break; default: - PMD_DRV_LOG(DEBUG, "Unknown WC interface type 0x%x", + PMD_DRV_LOG(DEBUG, sc, "Unknown WC interface type 0x%x", serdes_net_if); break; } @@ -11338,7 +11351,7 @@ static elink_status_t elink_populate_int_phy(struct bnx2x_softc *sc, *phy = phy_xgxs; break; default: - PMD_DRV_LOG(DEBUG, "Invalid switch_cfg"); + PMD_DRV_LOG(DEBUG, sc, "Invalid switch_cfg"); return ELINK_STATUS_ERROR; } } @@ -11351,7 +11364,7 @@ static elink_status_t elink_populate_int_phy(struct bnx2x_softc *sc, else phy->def_md_devad = ELINK_DEFAULT_PHY_DEV_ADDR; - PMD_DRV_LOG(DEBUG, "Internal phy port=%d, addr=0x%x, mdio_ctl=0x%x", + PMD_DRV_LOG(DEBUG, sc, "Internal phy port=%d, addr=0x%x, mdio_ctl=0x%x", port, phy->addr, phy->mdio_ctrl); elink_populate_preemphasis(sc, shmem_base, phy, port, ELINK_INT_PHY); @@ -11478,9 +11491,9 @@ static elink_status_t elink_populate_ext_phy(struct bnx2x_softc *sc, ELINK_SUPPORTED_100baseT_Full); } - PMD_DRV_LOG(DEBUG, "phy_type 0x%x port %d found in index %d", + PMD_DRV_LOG(DEBUG, sc, "phy_type 0x%x port %d found in index %d", phy_type, port, phy_index); - PMD_DRV_LOG(DEBUG, " addr=0x%x, mdio_ctl=0x%x", + PMD_DRV_LOG(DEBUG, sc, " addr=0x%x, mdio_ctl=0x%x", phy->addr, phy->mdio_ctrl); return ELINK_STATUS_OK; } @@ -11529,7 +11542,7 @@ static void elink_phy_def_cfg(struct elink_params *params, speed_capability_mask)); } - PMD_DRV_LOG(DEBUG, + PMD_DRV_LOG(DEBUG, sc, "Default config phy idx %x cfg 0x%x speed_cap_mask 0x%x", phy_index, link_config, phy->speed_cap_mask); @@ -11620,7 +11633,7 @@ elink_status_t elink_phy_probe(struct elink_params * params) struct bnx2x_softc *sc = params->sc; struct elink_phy *phy; params->num_phys = 0; - PMD_DRV_LOG(DEBUG, "Begin phy probe"); + PMD_DRV_LOG(DEBUG, sc, "Begin phy probe"); phy_config_swapped = params->multi_phy_config & PORT_HW_CFG_PHY_SWAPPED_ENABLED; @@ -11633,7 +11646,7 @@ elink_status_t elink_phy_probe(struct elink_params * params) else if (phy_index == ELINK_EXT_PHY2) actual_phy_idx = ELINK_EXT_PHY1; } - PMD_DRV_LOG(DEBUG, "phy_config_swapped %x, phy_index %x," + PMD_DRV_LOG(DEBUG, sc, "phy_config_swapped %x, phy_index %x," " actual_phy_idx %x", phy_config_swapped, phy_index, actual_phy_idx); phy = ¶ms->phy[actual_phy_idx]; @@ -11641,7 +11654,7 @@ elink_status_t elink_phy_probe(struct elink_params * params) params->shmem2_base, params->port, phy) != ELINK_STATUS_OK) { params->num_phys = 0; - PMD_DRV_LOG(DEBUG, "phy probe failed in phy index %d", + PMD_DRV_LOG(DEBUG, sc, "phy probe failed in phy index %d", phy_index); for (phy_index = ELINK_INT_PHY; phy_index < ELINK_MAX_PHYS; phy_index++) @@ -11682,7 +11695,8 @@ elink_status_t elink_phy_probe(struct elink_params * params) params->num_phys++; } - PMD_DRV_LOG(DEBUG, "End phy probe. #phys found %x", params->num_phys); + PMD_DRV_LOG(DEBUG, sc, + "End phy probe. #phys found %x", params->num_phys); return ELINK_STATUS_OK; } @@ -11852,7 +11866,7 @@ static elink_status_t elink_avoid_link_flap(struct elink_params *params, for (phy_idx = ELINK_INT_PHY; phy_idx < params->num_phys; phy_idx++) { struct elink_phy *phy = ¶ms->phy[phy_idx]; if (phy->phy_specific_func) { - PMD_DRV_LOG(DEBUG, "Calling PHY specific func"); + PMD_DRV_LOG(DEBUG, sc, "Calling PHY specific func"); phy->phy_specific_func(phy, params, ELINK_PHY_INIT); } if ((phy->media_type == ELINK_ETH_PHY_SFPP_10G_FIBER) || @@ -11972,12 +11986,13 @@ elink_status_t elink_phy_init(struct elink_params *params, { int lfa_status; struct bnx2x_softc *sc = params->sc; - PMD_DRV_LOG(DEBUG, "Phy Initialization started"); - PMD_DRV_LOG(DEBUG, "(1) req_speed %d, req_flowctrl %d", + PMD_DRV_LOG(DEBUG, sc, "Phy Initialization started"); + PMD_DRV_LOG(DEBUG, sc, "(1) req_speed %d, req_flowctrl %d", params->req_line_speed[0], params->req_flow_ctrl[0]); - PMD_DRV_LOG(DEBUG, "(2) req_speed %d, req_flowctrl %d", + PMD_DRV_LOG(DEBUG, sc, "(2) req_speed %d, req_flowctrl %d", params->req_line_speed[1], params->req_flow_ctrl[1]); - PMD_DRV_LOG(DEBUG, "req_adv_flow_ctrl 0x%x", params->req_fc_auto_adv); + PMD_DRV_LOG(DEBUG, sc, + "req_adv_flow_ctrl 0x%x", params->req_fc_auto_adv); vars->link_status = 0; vars->phy_link_up = 0; vars->link_up = 0; @@ -11994,11 +12009,13 @@ elink_status_t elink_phy_init(struct elink_params *params, lfa_status = elink_check_lfa(params); if (lfa_status == 0) { - PMD_DRV_LOG(DEBUG, "Link Flap Avoidance in progress"); + PMD_DRV_LOG(DEBUG, sc, + "Link Flap Avoidance in progress"); return elink_avoid_link_flap(params, vars); } - PMD_DRV_LOG(DEBUG, "Cannot avoid link flap lfa_sta=0x%x", lfa_status); + PMD_DRV_LOG(DEBUG, sc, + "Cannot avoid link flap lfa_sta=0x%x", lfa_status); elink_cannot_avoid_link_flap(params, vars, lfa_status); /* Disable attentions */ @@ -12014,12 +12031,12 @@ elink_status_t elink_phy_init(struct elink_params *params, vars->link_status |= LINK_STATUS_PFC_ENABLED; if ((params->num_phys == 0) && !CHIP_REV_IS_SLOW(sc)) { - PMD_DRV_LOG(DEBUG, "No phy found for initialization !!"); + PMD_DRV_LOG(DEBUG, sc, "No phy found for initialization !!"); return ELINK_STATUS_ERROR; } set_phy_vars(params, vars); - PMD_DRV_LOG(DEBUG, "Num of phys on board: %d", params->num_phys); + PMD_DRV_LOG(DEBUG, sc, "Num of phys on board: %d", params->num_phys); switch (params->loopback_mode) { case ELINK_LOOPBACK_BMAC: @@ -12062,7 +12079,7 @@ static elink_status_t elink_link_reset(struct elink_params *params, { struct bnx2x_softc *sc = params->sc; uint8_t phy_index, port = params->port, clear_latch_ind = 0; - PMD_DRV_LOG(DEBUG, "Resetting the link of port %d", port); + PMD_DRV_LOG(DEBUG, sc, "Resetting the link of port %d", port); /* Disable attentions */ vars->link_status = 0; elink_update_mng(params, vars->link_status); @@ -12240,7 +12257,7 @@ static elink_status_t elink_8073_common_init_phy(struct bnx2x_softc *sc, if (elink_populate_phy(sc, phy_index, shmem_base, shmem2_base, port_of_path, &phy[port]) != ELINK_STATUS_OK) { - PMD_DRV_LOG(DEBUG, "populate_phy failed"); + PMD_DRV_LOG(DEBUG, sc, "populate_phy failed"); return ELINK_STATUS_ERROR; } /* Disable attentions */ @@ -12280,7 +12297,7 @@ static elink_status_t elink_8073_common_init_phy(struct bnx2x_softc *sc, else port_of_path = 0; - PMD_DRV_LOG(DEBUG, "Loading spirom for phy address 0x%x", + PMD_DRV_LOG(DEBUG, sc, "Loading spirom for phy address 0x%x", phy_blk[port]->addr); if (elink_8073_8727_external_rom_boot(sc, phy_blk[port], port_of_path)) @@ -12364,7 +12381,7 @@ static elink_status_t elink_8726_common_init_phy(struct bnx2x_softc *sc, /* Extract the ext phy address for the port */ if (elink_populate_phy(sc, phy_index, shmem_base, shmem2_base, port, &phy) != ELINK_STATUS_OK) { - PMD_DRV_LOG(DEBUG, "populate phy failed"); + PMD_DRV_LOG(DEBUG, sc, "populate phy failed"); return ELINK_STATUS_ERROR; } @@ -12484,7 +12501,7 @@ static elink_status_t elink_8727_common_init_phy(struct bnx2x_softc *sc, if (elink_populate_phy(sc, phy_index, shmem_base, shmem2_base, port_of_path, &phy[port]) != ELINK_STATUS_OK) { - PMD_DRV_LOG(DEBUG, "populate phy failed"); + PMD_DRV_LOG(DEBUG, sc, "populate phy failed"); return ELINK_STATUS_ERROR; } /* disable attentions */ @@ -12515,7 +12532,7 @@ static elink_status_t elink_8727_common_init_phy(struct bnx2x_softc *sc, port_of_path = port; else port_of_path = 0; - PMD_DRV_LOG(DEBUG, "Loading spirom for phy address 0x%x", + PMD_DRV_LOG(DEBUG, sc, "Loading spirom for phy address 0x%x", phy_blk[port]->addr); if (elink_8073_8727_external_rom_boot(sc, phy_blk[port], port_of_path)) @@ -12542,7 +12559,8 @@ static elink_status_t elink_84833_common_init_phy(struct bnx2x_softc *sc, DELAY(10); elink_cb_gpio_mult_write(sc, reset_gpios, MISC_REGISTERS_GPIO_OUTPUT_HIGH); - PMD_DRV_LOG(DEBUG, "84833 reset pulse on pin values 0x%x", reset_gpios); + PMD_DRV_LOG(DEBUG, sc, + "84833 reset pulse on pin values 0x%x", reset_gpios); return ELINK_STATUS_OK; } @@ -12590,7 +12608,7 @@ static elink_status_t elink_ext_phy_common_init(struct bnx2x_softc *sc, rc = ELINK_STATUS_ERROR; break; default: - PMD_DRV_LOG(DEBUG, + PMD_DRV_LOG(DEBUG, sc, "ext_phy 0x%x common init not required", ext_phy_type); break; @@ -12616,7 +12634,7 @@ elink_status_t elink_common_init_phy(struct bnx2x_softc * sc, elink_set_mdio_clk(sc, GRCBASE_EMAC0); elink_set_mdio_clk(sc, GRCBASE_EMAC1); - PMD_DRV_LOG(DEBUG, "Begin common phy init"); + PMD_DRV_LOG(DEBUG, sc, "Begin common phy init"); if (CHIP_IS_E3(sc)) { /* Enable EPIO */ val = REG_RD(sc, MISC_REG_GEN_PURP_HWG); @@ -12627,7 +12645,7 @@ elink_status_t elink_common_init_phy(struct bnx2x_softc * sc, offsetof(struct shmem_region, port_mb[PORT_0].ext_phy_fw_version)); if (phy_ver) { - PMD_DRV_LOG(DEBUG, "Not doing common init; phy ver is 0x%x", + PMD_DRV_LOG(DEBUG, sc, "Not doing common init; phy ver is 0x%x", phy_ver); return ELINK_STATUS_OK; } @@ -12699,15 +12717,15 @@ static uint8_t elink_analyze_link_error(struct elink_params *params, /* If values differ */ switch (phy_flag) { case PHY_HALF_OPEN_CONN_FLAG: - PMD_DRV_LOG(DEBUG, "Analyze Remote Fault"); + PMD_DRV_LOG(DEBUG, sc, "Analyze Remote Fault"); break; case PHY_SFP_TX_FAULT_FLAG: - PMD_DRV_LOG(DEBUG, "Analyze TX Fault"); + PMD_DRV_LOG(DEBUG, sc, "Analyze TX Fault"); break; default: - PMD_DRV_LOG(DEBUG, "Analyze UNKNOWN"); + PMD_DRV_LOG(DEBUG, sc, "Analyze UNKNOWN"); } - PMD_DRV_LOG(DEBUG, "Link changed:[%x %x]->%x", vars->link_up, + PMD_DRV_LOG(DEBUG, sc, "Link changed:[%x %x]->%x", vars->link_up, old_status, status); /* a. Update shmem->link_status accordingly @@ -12833,7 +12851,7 @@ static void elink_sfp_tx_fault_detection(struct elink_phy *phy, PORT_HW_CFG_E3_TX_FAULT_SHIFT; if (elink_get_cfg_pin(sc, cfg_pin, &value)) { - PMD_DRV_LOG(DEBUG, "Failed to read pin 0x%02x", cfg_pin); + PMD_DRV_LOG(DEBUG, sc, "Failed to read pin 0x%02x", cfg_pin); return; } @@ -12855,7 +12873,7 @@ static void elink_sfp_tx_fault_detection(struct elink_phy *phy, /* If module is unapproved, led should be on regardless */ if (!(phy->flags & ELINK_FLAGS_SFP_NOT_APPROVED)) { - PMD_DRV_LOG(DEBUG, "Change TX_Fault LED: ->%x", + PMD_DRV_LOG(DEBUG, sc, "Change TX_Fault LED: ->%x", led_mode); elink_set_e3_module_fault_led(params, led_mode); } @@ -12865,7 +12883,7 @@ static void elink_sfp_tx_fault_detection(struct elink_phy *phy, static void elink_kr2_recovery(struct elink_params *params, struct elink_vars *vars, struct elink_phy *phy) { - PMD_DRV_LOG(DEBUG, "KR2 recovery"); + PMD_DRV_LOG(DEBUG, params->sc, "KR2 recovery"); elink_warpcore_enable_AN_KR2(phy, params, vars); elink_warpcore_restart_AN_KR(phy, params); @@ -12892,7 +12910,7 @@ static void elink_check_kr2_wa(struct elink_params *params, if (!sigdet) { if (!(vars->link_attr_sync & LINK_ATTR_SYNC_KR2_ENABLE)) { elink_kr2_recovery(params, vars, phy); - PMD_DRV_LOG(DEBUG, "No sigdet"); + PMD_DRV_LOG(DEBUG, sc, "No sigdet"); } return; } @@ -12910,7 +12928,7 @@ static void elink_check_kr2_wa(struct elink_params *params, if (base_page == 0) { if (!(vars->link_attr_sync & LINK_ATTR_SYNC_KR2_ENABLE)) { elink_kr2_recovery(params, vars, phy); - PMD_DRV_LOG(DEBUG, "No BP"); + PMD_DRV_LOG(DEBUG, sc, "No BP"); } return; } @@ -12926,7 +12944,7 @@ static void elink_check_kr2_wa(struct elink_params *params, /* In case KR2 is already disabled, check if we need to re-enable it */ if (!(vars->link_attr_sync & LINK_ATTR_SYNC_KR2_ENABLE)) { if (!not_kr2_device) { - PMD_DRV_LOG(DEBUG, "BP=0x%x, NP=0x%x", base_page, + PMD_DRV_LOG(DEBUG, sc, "BP=0x%x, NP=0x%x", base_page, next_page); elink_kr2_recovery(params, vars, phy); } @@ -12935,7 +12953,8 @@ static void elink_check_kr2_wa(struct elink_params *params, /* KR2 is enabled, but not KR2 device */ if (not_kr2_device) { /* Disable KR2 on both lanes */ - PMD_DRV_LOG(DEBUG, "BP=0x%x, NP=0x%x", base_page, next_page); + PMD_DRV_LOG(DEBUG, sc, + "BP=0x%x, NP=0x%x", base_page, next_page); elink_disable_kr2(params, vars, phy); /* Restart AN on leading lane */ elink_warpcore_restart_AN_KR(phy, params); @@ -12952,7 +12971,7 @@ void elink_period_func(struct elink_params *params, struct elink_vars *vars) elink_set_aer_mmd(params, ¶ms->phy[phy_idx]); if (elink_check_half_open_conn(params, vars, 1) != ELINK_STATUS_OK) { - PMD_DRV_LOG(DEBUG, "Fault detection failed"); + PMD_DRV_LOG(DEBUG, sc, "Fault detection failed"); } break; } @@ -12998,7 +13017,7 @@ uint8_t elink_fan_failure_det_req(struct bnx2x_softc *sc, if (elink_populate_phy(sc, phy_index, shmem_base, shmem2_base, port, &phy) != ELINK_STATUS_OK) { - PMD_DRV_LOG(DEBUG, "populate phy failed"); + PMD_DRV_LOG(DEBUG, sc, "populate phy failed"); return 0; } fan_failure_det_req |= (phy.flags & @@ -13048,7 +13067,7 @@ void elink_init_mod_abs_int(struct bnx2x_softc *sc, struct elink_vars *vars, if (elink_populate_phy(sc, phy_index, shmem_base, shmem2_base, port, &phy) != ELINK_STATUS_OK) { - PMD_DRV_LOG(DEBUG, "populate phy failed"); + PMD_DRV_LOG(DEBUG, sc, "populate phy failed"); return; } if (phy.type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BNX2X8726) { @@ -13078,7 +13097,7 @@ void elink_init_mod_abs_int(struct bnx2x_softc *sc, struct elink_vars *vars, dev_info.port_hw_config[port].aeu_int_mask); REG_WR(sc, sync_offset, vars->aeu_int_mask); - PMD_DRV_LOG(DEBUG, "Setting MOD_ABS (GPIO%d_P%d) AEU to 0x%x", + PMD_DRV_LOG(DEBUG, sc, "Setting MOD_ABS (GPIO%d_P%d) AEU to 0x%x", gpio_num, gpio_port, vars->aeu_int_mask); if (port == 0) |