summaryrefslogtreecommitdiffstats
path: root/drivers/net/liquidio/lio_ethdev.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/liquidio/lio_ethdev.c')
-rw-r--r--drivers/net/liquidio/lio_ethdev.c76
1 files changed, 16 insertions, 60 deletions
diff --git a/drivers/net/liquidio/lio_ethdev.c b/drivers/net/liquidio/lio_ethdev.c
index e1a20cd6..93e89007 100644
--- a/drivers/net/liquidio/lio_ethdev.c
+++ b/drivers/net/liquidio/lio_ethdev.c
@@ -373,8 +373,6 @@ lio_dev_info_get(struct rte_eth_dev *eth_dev,
struct lio_device *lio_dev = LIO_DEV(eth_dev);
struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(eth_dev);
- devinfo->pci_dev = pci_dev;
-
switch (pci_dev->id.subsystem_device_id) {
/* CN23xx 10G cards */
case PCI_SUBSYS_DEV_ID_CN2350_210:
@@ -478,9 +476,11 @@ lio_dev_mtu_set(struct rte_eth_dev *eth_dev, uint16_t mtu)
}
if (frame_len > ETHER_MAX_LEN)
- eth_dev->data->dev_conf.rxmode.jumbo_frame = 1;
+ eth_dev->data->dev_conf.rxmode.offloads |=
+ DEV_RX_OFFLOAD_JUMBO_FRAME;
else
- eth_dev->data->dev_conf.rxmode.jumbo_frame = 0;
+ eth_dev->data->dev_conf.rxmode.offloads &=
+ ~DEV_RX_OFFLOAD_JUMBO_FRAME;
eth_dev->data->dev_conf.rxmode.max_rx_pkt_len = frame_len;
eth_dev->data->mtu = mtu;
@@ -904,32 +904,6 @@ lio_dev_vlan_filter_set(struct rte_eth_dev *eth_dev, uint16_t vlan_id, int on)
return 0;
}
-/**
- * Atomically writes the link status information into global
- * structure rte_eth_dev.
- *
- * @param eth_dev
- * - Pointer to the structure rte_eth_dev to read from.
- * - Pointer to the buffer to be saved with the link status.
- *
- * @return
- * - On success, zero.
- * - On failure, negative value.
- */
-static inline int
-lio_dev_atomic_write_link_status(struct rte_eth_dev *eth_dev,
- struct rte_eth_link *link)
-{
- struct rte_eth_link *dst = &eth_dev->data->dev_link;
- struct rte_eth_link *src = link;
-
- if (rte_atomic64_cmpset((uint64_t *)dst, *(uint64_t *)dst,
- *(uint64_t *)src) == 0)
- return -1;
-
- return 0;
-}
-
static uint64_t
lio_hweight64(uint64_t w)
{
@@ -949,23 +923,19 @@ lio_dev_link_update(struct rte_eth_dev *eth_dev,
int wait_to_complete __rte_unused)
{
struct lio_device *lio_dev = LIO_DEV(eth_dev);
- struct rte_eth_link link, old;
+ struct rte_eth_link link;
/* Initialize */
+ memset(&link, 0, sizeof(link));
link.link_status = ETH_LINK_DOWN;
link.link_speed = ETH_SPEED_NUM_NONE;
link.link_duplex = ETH_LINK_HALF_DUPLEX;
link.link_autoneg = ETH_LINK_AUTONEG;
- memset(&old, 0, sizeof(old));
/* Return what we found */
if (lio_dev->linfo.link.s.link_up == 0) {
/* Interface is down */
- if (lio_dev_atomic_write_link_status(eth_dev, &link))
- return -1;
- if (link.link_status == old.link_status)
- return -1;
- return 0;
+ return rte_eth_linkstatus_set(eth_dev, &link);
}
link.link_status = ETH_LINK_UP; /* Interface is up */
@@ -982,13 +952,7 @@ lio_dev_link_update(struct rte_eth_dev *eth_dev,
link.link_duplex = ETH_LINK_HALF_DUPLEX;
}
- if (lio_dev_atomic_write_link_status(eth_dev, &link))
- return -1;
-
- if (link.link_status == old.link_status)
- return -1;
-
- return 0;
+ return rte_eth_linkstatus_set(eth_dev, &link);
}
/**
@@ -1441,6 +1405,11 @@ lio_dev_start(struct rte_eth_dev *eth_dev)
/* Configure RSS if device configured with multiple RX queues. */
lio_dev_mq_rx_configure(eth_dev);
+ /* Before update the link info,
+ * must set linfo.link.link_status64 to 0.
+ */
+ lio_dev->linfo.link.link_status64 = 0;
+
/* start polling for lsc */
ret = rte_eal_alarm_set(LIO_LSC_TIMEOUT,
lio_sync_link_state_check,
@@ -2146,19 +2115,8 @@ static int
lio_eth_dev_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
struct rte_pci_device *pci_dev)
{
- struct rte_eth_dev *eth_dev;
- int ret;
-
- eth_dev = rte_eth_dev_pci_allocate(pci_dev,
- sizeof(struct lio_device));
- if (eth_dev == NULL)
- return -ENOMEM;
-
- ret = lio_eth_dev_init(eth_dev);
- if (ret)
- rte_eth_dev_pci_release(eth_dev);
-
- return ret;
+ return rte_eth_dev_pci_generic_probe(pci_dev, sizeof(struct lio_device),
+ lio_eth_dev_init);
}
static int
@@ -2185,9 +2143,7 @@ RTE_PMD_REGISTER_PCI(net_liovf, rte_liovf_pmd);
RTE_PMD_REGISTER_PCI_TABLE(net_liovf, pci_id_liovf_map);
RTE_PMD_REGISTER_KMOD_DEP(net_liovf, "* igb_uio | vfio-pci");
-RTE_INIT(lio_init_log);
-static void
-lio_init_log(void)
+RTE_INIT(lio_init_log)
{
lio_logtype_init = rte_log_register("pmd.net.liquidio.init");
if (lio_logtype_init >= 0)