summaryrefslogtreecommitdiffstats
path: root/kernel/linux/kni/ethtool/ixgbe/ixgbe_82598.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/linux/kni/ethtool/ixgbe/ixgbe_82598.c')
-rw-r--r--kernel/linux/kni/ethtool/ixgbe/ixgbe_82598.c1281
1 files changed, 1281 insertions, 0 deletions
diff --git a/kernel/linux/kni/ethtool/ixgbe/ixgbe_82598.c b/kernel/linux/kni/ethtool/ixgbe/ixgbe_82598.c
new file mode 100644
index 00000000..242de671
--- /dev/null
+++ b/kernel/linux/kni/ethtool/ixgbe/ixgbe_82598.c
@@ -0,0 +1,1281 @@
+// SPDX-License-Identifier: GPL-2.0
+/*******************************************************************************
+
+ Intel 10 Gigabit PCI Express Linux driver
+ Copyright(c) 1999 - 2012 Intel Corporation.
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include "ixgbe_type.h"
+#include "ixgbe_82598.h"
+#include "ixgbe_api.h"
+#include "ixgbe_common.h"
+#include "ixgbe_phy.h"
+
+static s32 ixgbe_get_link_capabilities_82598(struct ixgbe_hw *hw,
+ ixgbe_link_speed *speed,
+ bool *autoneg);
+static enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw);
+static s32 ixgbe_start_mac_link_82598(struct ixgbe_hw *hw,
+ bool autoneg_wait_to_complete);
+static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw,
+ ixgbe_link_speed *speed, bool *link_up,
+ bool link_up_wait_to_complete);
+static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg,
+ bool autoneg_wait_to_complete);
+static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg,
+ bool autoneg_wait_to_complete);
+static s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw);
+static s32 ixgbe_clear_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq);
+static s32 ixgbe_clear_vfta_82598(struct ixgbe_hw *hw);
+static void ixgbe_set_rxpba_82598(struct ixgbe_hw *hw, int num_pb,
+ u32 headroom, int strategy);
+
+/**
+ * ixgbe_set_pcie_completion_timeout - set pci-e completion timeout
+ * @hw: pointer to the HW structure
+ *
+ * The defaults for 82598 should be in the range of 50us to 50ms,
+ * however the hardware default for these parts is 500us to 1ms which is less
+ * than the 10ms recommended by the pci-e spec. To address this we need to
+ * increase the value to either 10ms to 250ms for capability version 1 config,
+ * or 16ms to 55ms for version 2.
+ **/
+void ixgbe_set_pcie_completion_timeout(struct ixgbe_hw *hw)
+{
+ u32 gcr = IXGBE_READ_REG(hw, IXGBE_GCR);
+ u16 pcie_devctl2;
+
+ /* only take action if timeout value is defaulted to 0 */
+ if (gcr & IXGBE_GCR_CMPL_TMOUT_MASK)
+ goto out;
+
+ /*
+ * if capababilities version is type 1 we can write the
+ * timeout of 10ms to 250ms through the GCR register
+ */
+ if (!(gcr & IXGBE_GCR_CAP_VER2)) {
+ gcr |= IXGBE_GCR_CMPL_TMOUT_10ms;
+ goto out;
+ }
+
+ /*
+ * for version 2 capabilities we need to write the config space
+ * directly in order to set the completion timeout value for
+ * 16ms to 55ms
+ */
+ pcie_devctl2 = IXGBE_READ_PCIE_WORD(hw, IXGBE_PCI_DEVICE_CONTROL2);
+ pcie_devctl2 |= IXGBE_PCI_DEVICE_CONTROL2_16ms;
+ IXGBE_WRITE_PCIE_WORD(hw, IXGBE_PCI_DEVICE_CONTROL2, pcie_devctl2);
+out:
+ /* disable completion timeout resend */
+ gcr &= ~IXGBE_GCR_CMPL_TMOUT_RESEND;
+ IXGBE_WRITE_REG(hw, IXGBE_GCR, gcr);
+}
+
+/**
+ * ixgbe_init_ops_82598 - Inits func ptrs and MAC type
+ * @hw: pointer to hardware structure
+ *
+ * Initialize the function pointers and assign the MAC type for 82598.
+ * Does not touch the hardware.
+ **/
+s32 ixgbe_init_ops_82598(struct ixgbe_hw *hw)
+{
+ struct ixgbe_mac_info *mac = &hw->mac;
+ struct ixgbe_phy_info *phy = &hw->phy;
+ s32 ret_val;
+
+ ret_val = ixgbe_init_phy_ops_generic(hw);
+ ret_val = ixgbe_init_ops_generic(hw);
+
+ /* PHY */
+ phy->ops.init = &ixgbe_init_phy_ops_82598;
+
+ /* MAC */
+ mac->ops.start_hw = &ixgbe_start_hw_82598;
+ mac->ops.reset_hw = &ixgbe_reset_hw_82598;
+ mac->ops.get_media_type = &ixgbe_get_media_type_82598;
+ mac->ops.get_supported_physical_layer =
+ &ixgbe_get_supported_physical_layer_82598;
+ mac->ops.read_analog_reg8 = &ixgbe_read_analog_reg8_82598;
+ mac->ops.write_analog_reg8 = &ixgbe_write_analog_reg8_82598;
+ mac->ops.set_lan_id = &ixgbe_set_lan_id_multi_port_pcie_82598;
+
+ /* RAR, Multicast, VLAN */
+ mac->ops.set_vmdq = &ixgbe_set_vmdq_82598;
+ mac->ops.clear_vmdq = &ixgbe_clear_vmdq_82598;
+ mac->ops.set_vfta = &ixgbe_set_vfta_82598;
+ mac->ops.set_vlvf = NULL;
+ mac->ops.clear_vfta = &ixgbe_clear_vfta_82598;
+
+ /* Flow Control */
+ mac->ops.fc_enable = &ixgbe_fc_enable_82598;
+
+ mac->mcft_size = 128;
+ mac->vft_size = 128;
+ mac->num_rar_entries = 16;
+ mac->rx_pb_size = 512;
+ mac->max_tx_queues = 32;
+ mac->max_rx_queues = 64;
+ mac->max_msix_vectors = ixgbe_get_pcie_msix_count_generic(hw);
+
+ /* SFP+ Module */
+ phy->ops.read_i2c_eeprom = &ixgbe_read_i2c_eeprom_82598;
+
+ /* Link */
+ mac->ops.check_link = &ixgbe_check_mac_link_82598;
+ mac->ops.setup_link = &ixgbe_setup_mac_link_82598;
+ mac->ops.flap_tx_laser = NULL;
+ mac->ops.get_link_capabilities = &ixgbe_get_link_capabilities_82598;
+ mac->ops.setup_rxpba = &ixgbe_set_rxpba_82598;
+
+ /* Manageability interface */
+ mac->ops.set_fw_drv_ver = NULL;
+
+ return ret_val;
+}
+
+/**
+ * ixgbe_init_phy_ops_82598 - PHY/SFP specific init
+ * @hw: pointer to hardware structure
+ *
+ * Initialize any function pointers that were not able to be
+ * set during init_shared_code because the PHY/SFP type was
+ * not known. Perform the SFP init if necessary.
+ *
+ **/
+s32 ixgbe_init_phy_ops_82598(struct ixgbe_hw *hw)
+{
+ struct ixgbe_mac_info *mac = &hw->mac;
+ struct ixgbe_phy_info *phy = &hw->phy;
+ s32 ret_val = 0;
+ u16 list_offset, data_offset;
+
+ /* Identify the PHY */
+ phy->ops.identify(hw);
+
+ /* Overwrite the link function pointers if copper PHY */
+ if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) {
+ mac->ops.setup_link = &ixgbe_setup_copper_link_82598;
+ mac->ops.get_link_capabilities =
+ &ixgbe_get_copper_link_capabilities_generic;
+ }
+
+ switch (hw->phy.type) {
+ case ixgbe_phy_tn:
+ phy->ops.setup_link = &ixgbe_setup_phy_link_tnx;
+ phy->ops.check_link = &ixgbe_check_phy_link_tnx;
+ phy->ops.get_firmware_version =
+ &ixgbe_get_phy_firmware_version_tnx;
+ break;
+ case ixgbe_phy_nl:
+ phy->ops.reset = &ixgbe_reset_phy_nl;
+
+ /* Call SFP+ identify routine to get the SFP+ module type */
+ ret_val = phy->ops.identify_sfp(hw);
+ if (ret_val != 0)
+ goto out;
+ else if (hw->phy.sfp_type == ixgbe_sfp_type_unknown) {
+ ret_val = IXGBE_ERR_SFP_NOT_SUPPORTED;
+ goto out;
+ }
+
+ /* Check to see if SFP+ module is supported */
+ ret_val = ixgbe_get_sfp_init_sequence_offsets(hw,
+ &list_offset,
+ &data_offset);
+ if (ret_val != 0) {
+ ret_val = IXGBE_ERR_SFP_NOT_SUPPORTED;
+ goto out;
+ }
+ break;
+ default:
+ break;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * ixgbe_start_hw_82598 - Prepare hardware for Tx/Rx
+ * @hw: pointer to hardware structure
+ *
+ * Starts the hardware using the generic start_hw function.
+ * Disables relaxed ordering Then set pcie completion timeout
+ *
+ **/
+s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw)
+{
+ u32 regval;
+ u32 i;
+ s32 ret_val = 0;
+
+ ret_val = ixgbe_start_hw_generic(hw);
+
+ /* Disable relaxed ordering */
+ for (i = 0; ((i < hw->mac.max_tx_queues) &&
+ (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) {
+ regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(i));
+ regval &= ~IXGBE_DCA_TXCTRL_DESC_WRO_EN;
+ IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(i), regval);
+ }
+
+ for (i = 0; ((i < hw->mac.max_rx_queues) &&
+ (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) {
+ regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i));
+ regval &= ~(IXGBE_DCA_RXCTRL_DATA_WRO_EN |
+ IXGBE_DCA_RXCTRL_HEAD_WRO_EN);
+ IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval);
+ }
+
+ /* set the completion timeout for interface */
+ if (ret_val == 0)
+ ixgbe_set_pcie_completion_timeout(hw);
+
+ return ret_val;
+}
+
+/**
+ * ixgbe_get_link_capabilities_82598 - Determines link capabilities
+ * @hw: pointer to hardware structure
+ * @speed: pointer to link speed
+ * @autoneg: boolean auto-negotiation value
+ *
+ * Determines the link capabilities by reading the AUTOC register.
+ **/
+static s32 ixgbe_get_link_capabilities_82598(struct ixgbe_hw *hw,
+ ixgbe_link_speed *speed,
+ bool *autoneg)
+{
+ s32 status = 0;
+ u32 autoc = 0;
+
+ /*
+ * Determine link capabilities based on the stored value of AUTOC,
+ * which represents EEPROM defaults. If AUTOC value has not been
+ * stored, use the current register value.
+ */
+ if (hw->mac.orig_link_settings_stored)
+ autoc = hw->mac.orig_autoc;
+ else
+ autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+
+ switch (autoc & IXGBE_AUTOC_LMS_MASK) {
+ case IXGBE_AUTOC_LMS_1G_LINK_NO_AN:
+ *speed = IXGBE_LINK_SPEED_1GB_FULL;
+ *autoneg = false;
+ break;
+
+ case IXGBE_AUTOC_LMS_10G_LINK_NO_AN:
+ *speed = IXGBE_LINK_SPEED_10GB_FULL;
+ *autoneg = false;
+ break;
+
+ case IXGBE_AUTOC_LMS_1G_AN:
+ *speed = IXGBE_LINK_SPEED_1GB_FULL;
+ *autoneg = true;
+ break;
+
+ case IXGBE_AUTOC_LMS_KX4_AN:
+ case IXGBE_AUTOC_LMS_KX4_AN_1G_AN:
+ *speed = IXGBE_LINK_SPEED_UNKNOWN;
+ if (autoc & IXGBE_AUTOC_KX4_SUPP)
+ *speed |= IXGBE_LINK_SPEED_10GB_FULL;
+ if (autoc & IXGBE_AUTOC_KX_SUPP)
+ *speed |= IXGBE_LINK_SPEED_1GB_FULL;
+ *autoneg = true;
+ break;
+
+ default:
+ status = IXGBE_ERR_LINK_SETUP;
+ break;
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_get_media_type_82598 - Determines media type
+ * @hw: pointer to hardware structure
+ *
+ * Returns the media type (fiber, copper, backplane)
+ **/
+static enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw)
+{
+ enum ixgbe_media_type media_type;
+
+ /* Detect if there is a copper PHY attached. */
+ switch (hw->phy.type) {
+ case ixgbe_phy_cu_unknown:
+ case ixgbe_phy_tn:
+ media_type = ixgbe_media_type_copper;
+ goto out;
+ default:
+ break;
+ }
+
+ /* Media type for I82598 is based on device ID */
+ switch (hw->device_id) {
+ case IXGBE_DEV_ID_82598:
+ case IXGBE_DEV_ID_82598_BX:
+ /* Default device ID is mezzanine card KX/KX4 */
+ media_type = ixgbe_media_type_backplane;
+ break;
+ case IXGBE_DEV_ID_82598AF_DUAL_PORT:
+ case IXGBE_DEV_ID_82598AF_SINGLE_PORT:
+ case IXGBE_DEV_ID_82598_DA_DUAL_PORT:
+ case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM:
+ case IXGBE_DEV_ID_82598EB_XF_LR:
+ case IXGBE_DEV_ID_82598EB_SFP_LOM:
+ media_type = ixgbe_media_type_fiber;
+ break;
+ case IXGBE_DEV_ID_82598EB_CX4:
+ case IXGBE_DEV_ID_82598_CX4_DUAL_PORT:
+ media_type = ixgbe_media_type_cx4;
+ break;
+ case IXGBE_DEV_ID_82598AT:
+ case IXGBE_DEV_ID_82598AT2:
+ media_type = ixgbe_media_type_copper;
+ break;
+ default:
+ media_type = ixgbe_media_type_unknown;
+ break;
+ }
+out:
+ return media_type;
+}
+
+/**
+ * ixgbe_fc_enable_82598 - Enable flow control
+ * @hw: pointer to hardware structure
+ *
+ * Enable flow control according to the current settings.
+ **/
+s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw)
+{
+ s32 ret_val = 0;
+ u32 fctrl_reg;
+ u32 rmcs_reg;
+ u32 reg;
+ u32 fcrtl, fcrth;
+ u32 link_speed = 0;
+ int i;
+ bool link_up;
+
+ /* Validate the water mark configuration */
+ if (!hw->fc.pause_time) {
+ ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS;
+ goto out;
+ }
+
+ /* Low water mark of zero causes XOFF floods */
+ for (i = 0; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) {
+ if ((hw->fc.current_mode & ixgbe_fc_tx_pause) &&
+ hw->fc.high_water[i]) {
+ if (!hw->fc.low_water[i] ||
+ hw->fc.low_water[i] >= hw->fc.high_water[i]) {
+ hw_dbg(hw, "Invalid water mark configuration\n");
+ ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS;
+ goto out;
+ }
+ }
+ }
+
+ /*
+ * On 82598 having Rx FC on causes resets while doing 1G
+ * so if it's on turn it off once we know link_speed. For
+ * more details see 82598 Specification update.
+ */
+ hw->mac.ops.check_link(hw, &link_speed, &link_up, false);
+ if (link_up && link_speed == IXGBE_LINK_SPEED_1GB_FULL) {
+ switch (hw->fc.requested_mode) {
+ case ixgbe_fc_full:
+ hw->fc.requested_mode = ixgbe_fc_tx_pause;
+ break;
+ case ixgbe_fc_rx_pause:
+ hw->fc.requested_mode = ixgbe_fc_none;
+ break;
+ default:
+ /* no change */
+ break;
+ }
+ }
+
+ /* Negotiate the fc mode to use */
+ ixgbe_fc_autoneg(hw);
+
+ /* Disable any previous flow control settings */
+ fctrl_reg = IXGBE_READ_REG(hw, IXGBE_FCTRL);
+ fctrl_reg &= ~(IXGBE_FCTRL_RFCE | IXGBE_FCTRL_RPFCE);
+
+ rmcs_reg = IXGBE_READ_REG(hw, IXGBE_RMCS);
+ rmcs_reg &= ~(IXGBE_RMCS_TFCE_PRIORITY | IXGBE_RMCS_TFCE_802_3X);
+
+ /*
+ * The possible values of fc.current_mode are:
+ * 0: Flow control is completely disabled
+ * 1: Rx flow control is enabled (we can receive pause frames,
+ * but not send pause frames).
+ * 2: Tx flow control is enabled (we can send pause frames but
+ * we do not support receiving pause frames).
+ * 3: Both Rx and Tx flow control (symmetric) are enabled.
+ * other: Invalid.
+ */
+ switch (hw->fc.current_mode) {
+ case ixgbe_fc_none:
+ /*
+ * Flow control is disabled by software override or autoneg.
+ * The code below will actually disable it in the HW.
+ */
+ break;
+ case ixgbe_fc_rx_pause:
+ /*
+ * Rx Flow control is enabled and Tx Flow control is
+ * disabled by software override. Since there really
+ * isn't a way to advertise that we are capable of RX
+ * Pause ONLY, we will advertise that we support both
+ * symmetric and asymmetric Rx PAUSE. Later, we will
+ * disable the adapter's ability to send PAUSE frames.
+ */
+ fctrl_reg |= IXGBE_FCTRL_RFCE;
+ break;
+ case ixgbe_fc_tx_pause:
+ /*
+ * Tx Flow control is enabled, and Rx Flow control is
+ * disabled by software override.
+ */
+ rmcs_reg |= IXGBE_RMCS_TFCE_802_3X;
+ break;
+ case ixgbe_fc_full:
+ /* Flow control (both Rx and Tx) is enabled by SW override. */
+ fctrl_reg |= IXGBE_FCTRL_RFCE;
+ rmcs_reg |= IXGBE_RMCS_TFCE_802_3X;
+ break;
+ default:
+ hw_dbg(hw, "Flow control param set incorrectly\n");
+ ret_val = IXGBE_ERR_CONFIG;
+ goto out;
+ break;
+ }
+
+ /* Set 802.3x based flow control settings. */
+ fctrl_reg |= IXGBE_FCTRL_DPF;
+ IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl_reg);
+ IXGBE_WRITE_REG(hw, IXGBE_RMCS, rmcs_reg);
+
+ /* Set up and enable Rx high/low water mark thresholds, enable XON. */
+ for (i = 0; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) {
+ if ((hw->fc.current_mode & ixgbe_fc_tx_pause) &&
+ hw->fc.high_water[i]) {
+ fcrtl = (hw->fc.low_water[i] << 10) | IXGBE_FCRTL_XONE;
+ fcrth = (hw->fc.high_water[i] << 10) | IXGBE_FCRTH_FCEN;
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTL(i), fcrtl);
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTH(i), fcrth);
+ } else {
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTL(i), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTH(i), 0);
+ }
+
+ }
+
+ /* Configure pause time (2 TCs per register) */
+ reg = hw->fc.pause_time * 0x00010001;
+ for (i = 0; i < (IXGBE_DCB_MAX_TRAFFIC_CLASS / 2); i++)
+ IXGBE_WRITE_REG(hw, IXGBE_FCTTV(i), reg);
+
+ /* Configure flow control refresh threshold value */
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTV, hw->fc.pause_time / 2);
+
+out:
+ return ret_val;
+}
+
+/**
+ * ixgbe_start_mac_link_82598 - Configures MAC link settings
+ * @hw: pointer to hardware structure
+ *
+ * Configures link settings based on values in the ixgbe_hw struct.
+ * Restarts the link. Performs autonegotiation if needed.
+ **/
+static s32 ixgbe_start_mac_link_82598(struct ixgbe_hw *hw,
+ bool autoneg_wait_to_complete)
+{
+ u32 autoc_reg;
+ u32 links_reg;
+ u32 i;
+ s32 status = 0;
+
+ /* Restart link */
+ autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+ autoc_reg |= IXGBE_AUTOC_AN_RESTART;
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
+
+ /* Only poll for autoneg to complete if specified to do so */
+ if (autoneg_wait_to_complete) {
+ if ((autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
+ IXGBE_AUTOC_LMS_KX4_AN ||
+ (autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
+ IXGBE_AUTOC_LMS_KX4_AN_1G_AN) {
+ links_reg = 0; /* Just in case Autoneg time = 0 */
+ for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) {
+ links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
+ if (links_reg & IXGBE_LINKS_KX_AN_COMP)
+ break;
+ msleep(100);
+ }
+ if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) {
+ status = IXGBE_ERR_AUTONEG_NOT_COMPLETE;
+ hw_dbg(hw, "Autonegotiation did not complete.\n");
+ }
+ }
+ }
+
+ /* Add delay to filter out noises during initial link setup */
+ msleep(50);
+
+ return status;
+}
+
+/**
+ * ixgbe_validate_link_ready - Function looks for phy link
+ * @hw: pointer to hardware structure
+ *
+ * Function indicates success when phy link is available. If phy is not ready
+ * within 5 seconds of MAC indicating link, the function returns error.
+ **/
+static s32 ixgbe_validate_link_ready(struct ixgbe_hw *hw)
+{
+ u32 timeout;
+ u16 an_reg;
+
+ if (hw->device_id != IXGBE_DEV_ID_82598AT2)
+ return 0;
+
+ for (timeout = 0;
+ timeout < IXGBE_VALIDATE_LINK_READY_TIMEOUT; timeout++) {
+ hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &an_reg);
+
+ if ((an_reg & IXGBE_MII_AUTONEG_COMPLETE) &&
+ (an_reg & IXGBE_MII_AUTONEG_LINK_UP))
+ break;
+
+ msleep(100);
+ }
+
+ if (timeout == IXGBE_VALIDATE_LINK_READY_TIMEOUT) {
+ hw_dbg(hw, "Link was indicated but link is down\n");
+ return IXGBE_ERR_LINK_SETUP;
+ }
+
+ return 0;
+}
+
+/**
+ * ixgbe_check_mac_link_82598 - Get link/speed status
+ * @hw: pointer to hardware structure
+ * @speed: pointer to link speed
+ * @link_up: true is link is up, false otherwise
+ * @link_up_wait_to_complete: bool used to wait for link up or not
+ *
+ * Reads the links register to determine if link is up and the current speed
+ **/
+static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw,
+ ixgbe_link_speed *speed, bool *link_up,
+ bool link_up_wait_to_complete)
+{
+ u32 links_reg;
+ u32 i;
+ u16 link_reg, adapt_comp_reg;
+
+ /*
+ * SERDES PHY requires us to read link status from undocumented
+ * register 0xC79F. Bit 0 set indicates link is up/ready; clear
+ * indicates link down. OxC00C is read to check that the XAUI lanes
+ * are active. Bit 0 clear indicates active; set indicates inactive.
+ */
+ if (hw->phy.type == ixgbe_phy_nl) {
+ hw->phy.ops.read_reg(hw, 0xC79F, IXGBE_TWINAX_DEV, &link_reg);
+ hw->phy.ops.read_reg(hw, 0xC79F, IXGBE_TWINAX_DEV, &link_reg);
+ hw->phy.ops.read_reg(hw, 0xC00C, IXGBE_TWINAX_DEV,
+ &adapt_comp_reg);
+ if (link_up_wait_to_complete) {
+ for (i = 0; i < IXGBE_LINK_UP_TIME; i++) {
+ if ((link_reg & 1) &&
+ ((adapt_comp_reg & 1) == 0)) {
+ *link_up = true;
+ break;
+ } else {
+ *link_up = false;
+ }
+ msleep(100);
+ hw->phy.ops.read_reg(hw, 0xC79F,
+ IXGBE_TWINAX_DEV,
+ &link_reg);
+ hw->phy.ops.read_reg(hw, 0xC00C,
+ IXGBE_TWINAX_DEV,
+ &adapt_comp_reg);
+ }
+ } else {
+ if ((link_reg & 1) && ((adapt_comp_reg & 1) == 0))
+ *link_up = true;
+ else
+ *link_up = false;
+ }
+
+ if (*link_up == false)
+ goto out;
+ }
+
+ links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
+ if (link_up_wait_to_complete) {
+ for (i = 0; i < IXGBE_LINK_UP_TIME; i++) {
+ if (links_reg & IXGBE_LINKS_UP) {
+ *link_up = true;
+ break;
+ } else {
+ *link_up = false;
+ }
+ msleep(100);
+ links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
+ }
+ } else {
+ if (links_reg & IXGBE_LINKS_UP)
+ *link_up = true;
+ else
+ *link_up = false;
+ }
+
+ if (links_reg & IXGBE_LINKS_SPEED)
+ *speed = IXGBE_LINK_SPEED_10GB_FULL;
+ else
+ *speed = IXGBE_LINK_SPEED_1GB_FULL;
+
+ if ((hw->device_id == IXGBE_DEV_ID_82598AT2) && (*link_up == true) &&
+ (ixgbe_validate_link_ready(hw) != 0))
+ *link_up = false;
+
+out:
+ return 0;
+}
+
+/**
+ * ixgbe_setup_mac_link_82598 - Set MAC link speed
+ * @hw: pointer to hardware structure
+ * @speed: new link speed
+ * @autoneg: true if autonegotiation enabled
+ * @autoneg_wait_to_complete: true when waiting for completion is needed
+ *
+ * Set the link speed in the AUTOC register and restarts link.
+ **/
+static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed, bool autoneg,
+ bool autoneg_wait_to_complete)
+{
+ s32 status = 0;
+ ixgbe_link_speed link_capabilities = IXGBE_LINK_SPEED_UNKNOWN;
+ u32 curr_autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+ u32 autoc = curr_autoc;
+ u32 link_mode = autoc & IXGBE_AUTOC_LMS_MASK;
+
+ /* Check to see if speed passed in is supported. */
+ ixgbe_get_link_capabilities(hw, &link_capabilities, &autoneg);
+ speed &= link_capabilities;
+
+ if (speed == IXGBE_LINK_SPEED_UNKNOWN)
+ status = IXGBE_ERR_LINK_SETUP;
+
+ /* Set KX4/KX support according to speed requested */
+ else if (link_mode == IXGBE_AUTOC_LMS_KX4_AN ||
+ link_mode == IXGBE_AUTOC_LMS_KX4_AN_1G_AN) {
+ autoc &= ~IXGBE_AUTOC_KX4_KX_SUPP_MASK;
+ if (speed & IXGBE_LINK_SPEED_10GB_FULL)
+ autoc |= IXGBE_AUTOC_KX4_SUPP;
+ if (speed & IXGBE_LINK_SPEED_1GB_FULL)
+ autoc |= IXGBE_AUTOC_KX_SUPP;
+ if (autoc != curr_autoc)
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc);
+ }
+
+ if (status == 0) {
+ /*
+ * Setup and restart the link based on the new values in
+ * ixgbe_hw This will write the AUTOC register based on the new
+ * stored values
+ */
+ status = ixgbe_start_mac_link_82598(hw,
+ autoneg_wait_to_complete);
+ }
+
+ return status;
+}
+
+
+/**
+ * ixgbe_setup_copper_link_82598 - Set the PHY autoneg advertised field
+ * @hw: pointer to hardware structure
+ * @speed: new link speed
+ * @autoneg: true if autonegotiation enabled
+ * @autoneg_wait_to_complete: true if waiting is needed to complete
+ *
+ * Sets the link speed in the AUTOC register in the MAC and restarts link.
+ **/
+static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg,
+ bool autoneg_wait_to_complete)
+{
+ s32 status;
+
+ /* Setup the PHY according to input speed */
+ status = hw->phy.ops.setup_link_speed(hw, speed, autoneg,
+ autoneg_wait_to_complete);
+ /* Set up MAC */
+ ixgbe_start_mac_link_82598(hw, autoneg_wait_to_complete);
+
+ return status;
+}
+
+/**
+ * ixgbe_reset_hw_82598 - Performs hardware reset
+ * @hw: pointer to hardware structure
+ *
+ * Resets the hardware by resetting the transmit and receive units, masks and
+ * clears all interrupts, performing a PHY reset, and performing a link (MAC)
+ * reset.
+ **/
+static s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw)
+{
+ s32 status = 0;
+ s32 phy_status = 0;
+ u32 ctrl;
+ u32 gheccr;
+ u32 i;
+ u32 autoc;
+ u8 analog_val;
+
+ /* Call adapter stop to disable tx/rx and clear interrupts */
+ status = hw->mac.ops.stop_adapter(hw);
+ if (status != 0)
+ goto reset_hw_out;
+
+ /*
+ * Power up the Atlas Tx lanes if they are currently powered down.
+ * Atlas Tx lanes are powered down for MAC loopback tests, but
+ * they are not automatically restored on reset.
+ */
+ hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, &analog_val);
+ if (analog_val & IXGBE_ATLAS_PDN_TX_REG_EN) {
+ /* Enable Tx Atlas so packets can be transmitted again */
+ hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK,
+ &analog_val);
+ analog_val &= ~IXGBE_ATLAS_PDN_TX_REG_EN;
+ hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK,
+ analog_val);
+
+ hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_10G,
+ &analog_val);
+ analog_val &= ~IXGBE_ATLAS_PDN_TX_10G_QL_ALL;
+ hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_10G,
+ analog_val);
+
+ hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_1G,
+ &analog_val);
+ analog_val &= ~IXGBE_ATLAS_PDN_TX_1G_QL_ALL;
+ hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_1G,
+ analog_val);
+
+ hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_AN,
+ &analog_val);
+ analog_val &= ~IXGBE_ATLAS_PDN_TX_AN_QL_ALL;
+ hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_AN,
+ analog_val);
+ }
+
+ /* Reset PHY */
+ if (hw->phy.reset_disable == false) {
+ /* PHY ops must be identified and initialized prior to reset */
+
+ /* Init PHY and function pointers, perform SFP setup */
+ phy_status = hw->phy.ops.init(hw);
+ if (phy_status == IXGBE_ERR_SFP_NOT_SUPPORTED)
+ goto reset_hw_out;
+ if (phy_status == IXGBE_ERR_SFP_NOT_PRESENT)
+ goto mac_reset_top;
+
+ hw->phy.ops.reset(hw);
+ }
+
+mac_reset_top:
+ /*
+ * Issue global reset to the MAC. This needs to be a SW reset.
+ * If link reset is used, it might reset the MAC when mng is using it
+ */
+ ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL) | IXGBE_CTRL_RST;
+ IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl);
+ IXGBE_WRITE_FLUSH(hw);
+
+ /* Poll for reset bit to self-clear indicating reset is complete */
+ for (i = 0; i < 10; i++) {
+ udelay(1);
+ ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
+ if (!(ctrl & IXGBE_CTRL_RST))
+ break;
+ }
+ if (ctrl & IXGBE_CTRL_RST) {
+ status = IXGBE_ERR_RESET_FAILED;
+ hw_dbg(hw, "Reset polling failed to complete.\n");
+ }
+
+ msleep(50);
+
+ /*
+ * Double resets are required for recovery from certain error
+ * conditions. Between resets, it is necessary to stall to allow time
+ * for any pending HW events to complete.
+ */
+ if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) {
+ hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED;
+ goto mac_reset_top;
+ }
+
+ gheccr = IXGBE_READ_REG(hw, IXGBE_GHECCR);
+ gheccr &= ~((1 << 21) | (1 << 18) | (1 << 9) | (1 << 6));
+ IXGBE_WRITE_REG(hw, IXGBE_GHECCR, gheccr);
+
+ /*
+ * Store the original AUTOC value if it has not been
+ * stored off yet. Otherwise restore the stored original
+ * AUTOC value since the reset operation sets back to deaults.
+ */
+ autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+ if (hw->mac.orig_link_settings_stored == false) {
+ hw->mac.orig_autoc = autoc;
+ hw->mac.orig_link_settings_stored = true;
+ } else if (autoc != hw->mac.orig_autoc) {
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC, hw->mac.orig_autoc);
+ }
+
+ /* Store the permanent mac address */
+ hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr);
+
+ /*
+ * Store MAC address from RAR0, clear receive address registers, and
+ * clear the multicast table
+ */
+ hw->mac.ops.init_rx_addrs(hw);
+
+reset_hw_out:
+ if (phy_status != 0)
+ status = phy_status;
+
+ return status;
+}
+
+/**
+ * ixgbe_set_vmdq_82598 - Associate a VMDq set index with a rx address
+ * @hw: pointer to hardware struct
+ * @rar: receive address register index to associate with a VMDq index
+ * @vmdq: VMDq set index
+ **/
+s32 ixgbe_set_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
+{
+ u32 rar_high;
+ u32 rar_entries = hw->mac.num_rar_entries;
+
+ /* Make sure we are using a valid rar index range */
+ if (rar >= rar_entries) {
+ hw_dbg(hw, "RAR index %d is out of range.\n", rar);
+ return IXGBE_ERR_INVALID_ARGUMENT;
+ }
+
+ rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(rar));
+ rar_high &= ~IXGBE_RAH_VIND_MASK;
+ rar_high |= ((vmdq << IXGBE_RAH_VIND_SHIFT) & IXGBE_RAH_VIND_MASK);
+ IXGBE_WRITE_REG(hw, IXGBE_RAH(rar), rar_high);
+ return 0;
+}
+
+/**
+ * ixgbe_clear_vmdq_82598 - Disassociate a VMDq set index from an rx address
+ * @hw: pointer to hardware struct
+ * @rar: receive address register index to associate with a VMDq index
+ * @vmdq: VMDq clear index (not used in 82598, but elsewhere)
+ **/
+static s32 ixgbe_clear_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
+{
+ u32 rar_high;
+ u32 rar_entries = hw->mac.num_rar_entries;
+
+
+ /* Make sure we are using a valid rar index range */
+ if (rar >= rar_entries) {
+ hw_dbg(hw, "RAR index %d is out of range.\n", rar);
+ return IXGBE_ERR_INVALID_ARGUMENT;
+ }
+
+ rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(rar));
+ if (rar_high & IXGBE_RAH_VIND_MASK) {
+ rar_high &= ~IXGBE_RAH_VIND_MASK;
+ IXGBE_WRITE_REG(hw, IXGBE_RAH(rar), rar_high);
+ }
+
+ return 0;
+}
+
+/**
+ * ixgbe_set_vfta_82598 - Set VLAN filter table
+ * @hw: pointer to hardware structure
+ * @vlan: VLAN id to write to VLAN filter
+ * @vind: VMDq output index that maps queue to VLAN id in VFTA
+ * @vlan_on: boolean flag to turn on/off VLAN in VFTA
+ *
+ * Turn on/off specified VLAN in the VLAN filter table.
+ **/
+s32 ixgbe_set_vfta_82598(struct ixgbe_hw *hw, u32 vlan, u32 vind,
+ bool vlan_on)
+{
+ u32 regindex;
+ u32 bitindex;
+ u32 bits;
+ u32 vftabyte;
+
+ if (vlan > 4095)
+ return IXGBE_ERR_PARAM;
+
+ /* Determine 32-bit word position in array */
+ regindex = (vlan >> 5) & 0x7F; /* upper seven bits */
+
+ /* Determine the location of the (VMD) queue index */
+ vftabyte = ((vlan >> 3) & 0x03); /* bits (4:3) indicating byte array */
+ bitindex = (vlan & 0x7) << 2; /* lower 3 bits indicate nibble */
+
+ /* Set the nibble for VMD queue index */
+ bits = IXGBE_READ_REG(hw, IXGBE_VFTAVIND(vftabyte, regindex));
+ bits &= (~(0x0F << bitindex));
+ bits |= (vind << bitindex);
+ IXGBE_WRITE_REG(hw, IXGBE_VFTAVIND(vftabyte, regindex), bits);
+
+ /* Determine the location of the bit for this VLAN id */
+ bitindex = vlan & 0x1F; /* lower five bits */
+
+ bits = IXGBE_READ_REG(hw, IXGBE_VFTA(regindex));
+ if (vlan_on)
+ /* Turn on this VLAN id */
+ bits |= (1 << bitindex);
+ else
+ /* Turn off this VLAN id */
+ bits &= ~(1 << bitindex);
+ IXGBE_WRITE_REG(hw, IXGBE_VFTA(regindex), bits);
+
+ return 0;
+}
+
+/**
+ * ixgbe_clear_vfta_82598 - Clear VLAN filter table
+ * @hw: pointer to hardware structure
+ *
+ * Clears the VLAN filer table, and the VMDq index associated with the filter
+ **/
+static s32 ixgbe_clear_vfta_82598(struct ixgbe_hw *hw)
+{
+ u32 offset;
+ u32 vlanbyte;
+
+ for (offset = 0; offset < hw->mac.vft_size; offset++)
+ IXGBE_WRITE_REG(hw, IXGBE_VFTA(offset), 0);
+
+ for (vlanbyte = 0; vlanbyte < 4; vlanbyte++)
+ for (offset = 0; offset < hw->mac.vft_size; offset++)
+ IXGBE_WRITE_REG(hw, IXGBE_VFTAVIND(vlanbyte, offset),
+ 0);
+
+ return 0;
+}
+
+/**
+ * ixgbe_read_analog_reg8_82598 - Reads 8 bit Atlas analog register
+ * @hw: pointer to hardware structure
+ * @reg: analog register to read
+ * @val: read value
+ *
+ * Performs read operation to Atlas analog register specified.
+ **/
+s32 ixgbe_read_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 *val)
+{
+ u32 atlas_ctl;
+
+ IXGBE_WRITE_REG(hw, IXGBE_ATLASCTL,
+ IXGBE_ATLASCTL_WRITE_CMD | (reg << 8));
+ IXGBE_WRITE_FLUSH(hw);
+ udelay(10);
+ atlas_ctl = IXGBE_READ_REG(hw, IXGBE_ATLASCTL);
+ *val = (u8)atlas_ctl;
+
+ return 0;
+}
+
+/**
+ * ixgbe_write_analog_reg8_82598 - Writes 8 bit Atlas analog register
+ * @hw: pointer to hardware structure
+ * @reg: atlas register to write
+ * @val: value to write
+ *
+ * Performs write operation to Atlas analog register specified.
+ **/
+s32 ixgbe_write_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 val)
+{
+ u32 atlas_ctl;
+
+ atlas_ctl = (reg << 8) | val;
+ IXGBE_WRITE_REG(hw, IXGBE_ATLASCTL, atlas_ctl);
+ IXGBE_WRITE_FLUSH(hw);
+ udelay(10);
+
+ return 0;
+}
+
+/**
+ * ixgbe_read_i2c_eeprom_82598 - Reads 8 bit word over I2C interface.
+ * @hw: pointer to hardware structure
+ * @byte_offset: EEPROM byte offset to read
+ * @eeprom_data: value read
+ *
+ * Performs 8 byte read operation to SFP module's EEPROM over I2C interface.
+ **/
+s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 *eeprom_data)
+{
+ s32 status = 0;
+ u16 sfp_addr = 0;
+ u16 sfp_data = 0;
+ u16 sfp_stat = 0;
+ u32 i;
+
+ if (hw->phy.type == ixgbe_phy_nl) {
+ /*
+ * NetLogic phy SDA/SCL registers are at addresses 0xC30A to
+ * 0xC30D. These registers are used to talk to the SFP+
+ * module's EEPROM through the SDA/SCL (I2C) interface.
+ */
+ sfp_addr = (IXGBE_I2C_EEPROM_DEV_ADDR << 8) + byte_offset;
+ sfp_addr = (sfp_addr | IXGBE_I2C_EEPROM_READ_MASK);
+ hw->phy.ops.write_reg(hw,
+ IXGBE_MDIO_PMA_PMD_SDA_SCL_ADDR,
+ IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+ sfp_addr);
+
+ /* Poll status */
+ for (i = 0; i < 100; i++) {
+ hw->phy.ops.read_reg(hw,
+ IXGBE_MDIO_PMA_PMD_SDA_SCL_STAT,
+ IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+ &sfp_stat);
+ sfp_stat = sfp_stat & IXGBE_I2C_EEPROM_STATUS_MASK;
+ if (sfp_stat != IXGBE_I2C_EEPROM_STATUS_IN_PROGRESS)
+ break;
+ msleep(10);
+ }
+
+ if (sfp_stat != IXGBE_I2C_EEPROM_STATUS_PASS) {
+ hw_dbg(hw, "EEPROM read did not pass.\n");
+ status = IXGBE_ERR_SFP_NOT_PRESENT;
+ goto out;
+ }
+
+ /* Read data */
+ hw->phy.ops.read_reg(hw, IXGBE_MDIO_PMA_PMD_SDA_SCL_DATA,
+ IXGBE_MDIO_PMA_PMD_DEV_TYPE, &sfp_data);
+
+ *eeprom_data = (u8)(sfp_data >> 8);
+ } else {
+ status = IXGBE_ERR_PHY;
+ goto out;
+ }
+
+out:
+ return status;
+}
+
+/**
+ * ixgbe_get_supported_physical_layer_82598 - Returns physical layer type
+ * @hw: pointer to hardware structure
+ *
+ * Determines physical layer capabilities of the current configuration.
+ **/
+u32 ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw *hw)
+{
+ u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
+ u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+ u32 pma_pmd_10g = autoc & IXGBE_AUTOC_10G_PMA_PMD_MASK;
+ u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK;
+ u16 ext_ability = 0;
+
+ hw->phy.ops.identify(hw);
+
+ /* Copper PHY must be checked before AUTOC LMS to determine correct
+ * physical layer because 10GBase-T PHYs use LMS = KX4/KX */
+ switch (hw->phy.type) {
+ case ixgbe_phy_tn:
+ case ixgbe_phy_cu_unknown:
+ hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_EXT_ABILITY,
+ IXGBE_MDIO_PMA_PMD_DEV_TYPE, &ext_ability);
+ if (ext_ability & IXGBE_MDIO_PHY_10GBASET_ABILITY)
+ physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T;
+ if (ext_ability & IXGBE_MDIO_PHY_1000BASET_ABILITY)
+ physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T;
+ if (ext_ability & IXGBE_MDIO_PHY_100BASETX_ABILITY)
+ physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX;
+ goto out;
+ default:
+ break;
+ }
+
+ switch (autoc & IXGBE_AUTOC_LMS_MASK) {
+ case IXGBE_AUTOC_LMS_1G_AN:
+ case IXGBE_AUTOC_LMS_1G_LINK_NO_AN:
+ if (pma_pmd_1g == IXGBE_AUTOC_1G_KX)
+ physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_KX;
+ else
+ physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_BX;
+ break;
+ case IXGBE_AUTOC_LMS_10G_LINK_NO_AN:
+ if (pma_pmd_10g == IXGBE_AUTOC_10G_CX4)
+ physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_CX4;
+ else if (pma_pmd_10g == IXGBE_AUTOC_10G_KX4)
+ physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KX4;
+ else /* XAUI */
+ physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
+ break;
+ case IXGBE_AUTOC_LMS_KX4_AN:
+ case IXGBE_AUTOC_LMS_KX4_AN_1G_AN:
+ if (autoc & IXGBE_AUTOC_KX_SUPP)
+ physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_KX;
+ if (autoc & IXGBE_AUTOC_KX4_SUPP)
+ physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KX4;
+ break;
+ default:
+ break;
+ }
+
+ if (hw->phy.type == ixgbe_phy_nl) {
+ hw->phy.ops.identify_sfp(hw);
+
+ switch (hw->phy.sfp_type) {
+ case ixgbe_sfp_type_da_cu:
+ physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU;
+ break;
+ case ixgbe_sfp_type_sr:
+ physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
+ break;
+ case ixgbe_sfp_type_lr:
+ physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
+ break;
+ default:
+ physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
+ break;
+ }
+ }
+
+ switch (hw->device_id) {
+ case IXGBE_DEV_ID_82598_DA_DUAL_PORT:
+ physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU;
+ break;
+ case IXGBE_DEV_ID_82598AF_DUAL_PORT:
+ case IXGBE_DEV_ID_82598AF_SINGLE_PORT:
+ case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM:
+ physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
+ break;
+ case IXGBE_DEV_ID_82598EB_XF_LR:
+ physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
+ break;
+ default:
+ break;
+ }
+
+out:
+ return physical_layer;
+}
+
+/**
+ * ixgbe_set_lan_id_multi_port_pcie_82598 - Set LAN id for PCIe multiple
+ * port devices.
+ * @hw: pointer to the HW structure
+ *
+ * Calls common function and corrects issue with some single port devices
+ * that enable LAN1 but not LAN0.
+ **/
+void ixgbe_set_lan_id_multi_port_pcie_82598(struct ixgbe_hw *hw)
+{
+ struct ixgbe_bus_info *bus = &hw->bus;
+ u16 pci_gen = 0;
+ u16 pci_ctrl2 = 0;
+
+ ixgbe_set_lan_id_multi_port_pcie(hw);
+
+ /* check if LAN0 is disabled */
+ hw->eeprom.ops.read(hw, IXGBE_PCIE_GENERAL_PTR, &pci_gen);
+ if ((pci_gen != 0) && (pci_gen != 0xFFFF)) {
+
+ hw->eeprom.ops.read(hw, pci_gen + IXGBE_PCIE_CTRL2, &pci_ctrl2);
+
+ /* if LAN0 is completely disabled force function to 0 */
+ if ((pci_ctrl2 & IXGBE_PCIE_CTRL2_LAN_DISABLE) &&
+ !(pci_ctrl2 & IXGBE_PCIE_CTRL2_DISABLE_SELECT) &&
+ !(pci_ctrl2 & IXGBE_PCIE_CTRL2_DUMMY_ENABLE)) {
+
+ bus->func = 0;
+ }
+ }
+}
+
+/**
+ * ixgbe_set_rxpba_82598 - Initialize RX packet buffer
+ * @hw: pointer to hardware structure
+ * @num_pb: number of packet buffers to allocate
+ * @headroom: reserve n KB of headroom
+ * @strategy: packet buffer allocation strategy
+ **/
+static void ixgbe_set_rxpba_82598(struct ixgbe_hw *hw, int num_pb,
+ u32 headroom, int strategy)
+{
+ u32 rxpktsize = IXGBE_RXPBSIZE_64KB;
+ u8 i = 0;
+
+ if (!num_pb)
+ return;
+
+ /* Setup Rx packet buffer sizes */
+ switch (strategy) {
+ case PBA_STRATEGY_WEIGHTED:
+ /* Setup the first four at 80KB */
+ rxpktsize = IXGBE_RXPBSIZE_80KB;
+ for (; i < 4; i++)
+ IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize);
+ /* Setup the last four at 48KB...don't re-init i */
+ rxpktsize = IXGBE_RXPBSIZE_48KB;
+ /* Fall Through */
+ case PBA_STRATEGY_EQUAL:
+ default:
+ /* Divide the remaining Rx packet buffer evenly among the TCs */
+ for (; i < IXGBE_MAX_PACKET_BUFFERS; i++)
+ IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize);
+ break;
+ }
+
+ /* Setup Tx packet buffer sizes */
+ for (i = 0; i < IXGBE_MAX_PACKET_BUFFERS; i++)
+ IXGBE_WRITE_REG(hw, IXGBE_TXPBSIZE(i), IXGBE_TXPBSIZE_40KB);
+
+ return;
+}