summaryrefslogtreecommitdiffstats
path: root/lib/librte_ethdev/rte_ethdev.c
diff options
context:
space:
mode:
Diffstat (limited to 'lib/librte_ethdev/rte_ethdev.c')
-rw-r--r--lib/librte_ethdev/rte_ethdev.c93
1 files changed, 60 insertions, 33 deletions
diff --git a/lib/librte_ethdev/rte_ethdev.c b/lib/librte_ethdev/rte_ethdev.c
index 8eaa5fcc..5f858174 100644
--- a/lib/librte_ethdev/rte_ethdev.c
+++ b/lib/librte_ethdev/rte_ethdev.c
@@ -1092,8 +1092,9 @@ rte_eth_dev_configure(uint16_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
{
struct rte_eth_dev *dev;
struct rte_eth_dev_info dev_info;
- struct rte_eth_conf local_conf = *dev_conf;
+ struct rte_eth_conf orig_conf;
int diag;
+ int ret;
RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -EINVAL);
@@ -1102,6 +1103,22 @@ rte_eth_dev_configure(uint16_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_infos_get, -ENOTSUP);
RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_configure, -ENOTSUP);
+ if (dev->data->dev_started) {
+ RTE_ETHDEV_LOG(ERR,
+ "Port %u must be stopped to allow configuration\n",
+ port_id);
+ return -EBUSY;
+ }
+
+ /* Store original config, as rollback required on failure */
+ memcpy(&orig_conf, &dev->data->dev_conf, sizeof(dev->data->dev_conf));
+
+ /*
+ * Copy the dev_conf parameter into the dev structure.
+ * rte_eth_dev_info_get() requires dev_conf, copy it before dev_info get
+ */
+ memcpy(&dev->data->dev_conf, dev_conf, sizeof(dev->data->dev_conf));
+
rte_eth_dev_info_get(port_id, &dev_info);
/* If number of queues specified by application for both Rx and Tx is
@@ -1123,26 +1140,18 @@ rte_eth_dev_configure(uint16_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
RTE_ETHDEV_LOG(ERR,
"Number of RX queues requested (%u) is greater than max supported(%d)\n",
nb_rx_q, RTE_MAX_QUEUES_PER_PORT);
- return -EINVAL;
+ ret = -EINVAL;
+ goto rollback;
}
if (nb_tx_q > RTE_MAX_QUEUES_PER_PORT) {
RTE_ETHDEV_LOG(ERR,
"Number of TX queues requested (%u) is greater than max supported(%d)\n",
nb_tx_q, RTE_MAX_QUEUES_PER_PORT);
- return -EINVAL;
- }
-
- if (dev->data->dev_started) {
- RTE_ETHDEV_LOG(ERR,
- "Port %u must be stopped to allow configuration\n",
- port_id);
- return -EBUSY;
+ ret = -EINVAL;
+ goto rollback;
}
- /* Copy the dev_conf parameter into the dev structure */
- memcpy(&dev->data->dev_conf, &local_conf, sizeof(dev->data->dev_conf));
-
/*
* Check that the numbers of RX and TX queues are not greater
* than the maximum number of RX and TX queues supported by the
@@ -1151,13 +1160,15 @@ rte_eth_dev_configure(uint16_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
if (nb_rx_q > dev_info.max_rx_queues) {
RTE_ETHDEV_LOG(ERR, "Ethdev port_id=%u nb_rx_queues=%u > %u\n",
port_id, nb_rx_q, dev_info.max_rx_queues);
- return -EINVAL;
+ ret = -EINVAL;
+ goto rollback;
}
if (nb_tx_q > dev_info.max_tx_queues) {
RTE_ETHDEV_LOG(ERR, "Ethdev port_id=%u nb_tx_queues=%u > %u\n",
port_id, nb_tx_q, dev_info.max_tx_queues);
- return -EINVAL;
+ ret = -EINVAL;
+ goto rollback;
}
/* Check that the device supports requested interrupts */
@@ -1165,32 +1176,36 @@ rte_eth_dev_configure(uint16_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
(!(dev->data->dev_flags & RTE_ETH_DEV_INTR_LSC))) {
RTE_ETHDEV_LOG(ERR, "Driver %s does not support lsc\n",
dev->device->driver->name);
- return -EINVAL;
+ ret = -EINVAL;
+ goto rollback;
}
if ((dev_conf->intr_conf.rmv == 1) &&
(!(dev->data->dev_flags & RTE_ETH_DEV_INTR_RMV))) {
RTE_ETHDEV_LOG(ERR, "Driver %s does not support rmv\n",
dev->device->driver->name);
- return -EINVAL;
+ ret = -EINVAL;
+ goto rollback;
}
/*
* If jumbo frames are enabled, check that the maximum RX packet
* length is supported by the configured device.
*/
- if (local_conf.rxmode.offloads & DEV_RX_OFFLOAD_JUMBO_FRAME) {
+ if (dev_conf->rxmode.offloads & DEV_RX_OFFLOAD_JUMBO_FRAME) {
if (dev_conf->rxmode.max_rx_pkt_len > dev_info.max_rx_pktlen) {
RTE_ETHDEV_LOG(ERR,
"Ethdev port_id=%u max_rx_pkt_len %u > max valid value %u\n",
port_id, dev_conf->rxmode.max_rx_pkt_len,
dev_info.max_rx_pktlen);
- return -EINVAL;
+ ret = -EINVAL;
+ goto rollback;
} else if (dev_conf->rxmode.max_rx_pkt_len < ETHER_MIN_LEN) {
RTE_ETHDEV_LOG(ERR,
"Ethdev port_id=%u max_rx_pkt_len %u < min valid value %u\n",
port_id, dev_conf->rxmode.max_rx_pkt_len,
(unsigned)ETHER_MIN_LEN);
- return -EINVAL;
+ ret = -EINVAL;
+ goto rollback;
}
} else {
if (dev_conf->rxmode.max_rx_pkt_len < ETHER_MIN_LEN ||
@@ -1201,25 +1216,27 @@ rte_eth_dev_configure(uint16_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
}
/* Any requested offloading must be within its device capabilities */
- if ((local_conf.rxmode.offloads & dev_info.rx_offload_capa) !=
- local_conf.rxmode.offloads) {
+ if ((dev_conf->rxmode.offloads & dev_info.rx_offload_capa) !=
+ dev_conf->rxmode.offloads) {
RTE_ETHDEV_LOG(ERR,
"Ethdev port_id=%u requested Rx offloads 0x%"PRIx64" doesn't match Rx offloads "
"capabilities 0x%"PRIx64" in %s()\n",
- port_id, local_conf.rxmode.offloads,
+ port_id, dev_conf->rxmode.offloads,
dev_info.rx_offload_capa,
__func__);
- return -EINVAL;
+ ret = -EINVAL;
+ goto rollback;
}
- if ((local_conf.txmode.offloads & dev_info.tx_offload_capa) !=
- local_conf.txmode.offloads) {
+ if ((dev_conf->txmode.offloads & dev_info.tx_offload_capa) !=
+ dev_conf->txmode.offloads) {
RTE_ETHDEV_LOG(ERR,
"Ethdev port_id=%u requested Tx offloads 0x%"PRIx64" doesn't match Tx offloads "
"capabilities 0x%"PRIx64" in %s()\n",
- port_id, local_conf.txmode.offloads,
+ port_id, dev_conf->txmode.offloads,
dev_info.tx_offload_capa,
__func__);
- return -EINVAL;
+ ret = -EINVAL;
+ goto rollback;
}
/* Check that device supports requested rss hash functions. */
@@ -1230,7 +1247,8 @@ rte_eth_dev_configure(uint16_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
"Ethdev port_id=%u invalid rss_hf: 0x%"PRIx64", valid value: 0x%"PRIx64"\n",
port_id, dev_conf->rx_adv_conf.rss_conf.rss_hf,
dev_info.flow_type_rss_offloads);
- return -EINVAL;
+ ret = -EINVAL;
+ goto rollback;
}
/*
@@ -1241,7 +1259,8 @@ rte_eth_dev_configure(uint16_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
RTE_ETHDEV_LOG(ERR,
"Port%u rte_eth_dev_rx_queue_config = %d\n",
port_id, diag);
- return diag;
+ ret = diag;
+ goto rollback;
}
diag = rte_eth_dev_tx_queue_config(dev, nb_tx_q);
@@ -1250,7 +1269,8 @@ rte_eth_dev_configure(uint16_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
"Port%u rte_eth_dev_tx_queue_config = %d\n",
port_id, diag);
rte_eth_dev_rx_queue_config(dev, 0);
- return diag;
+ ret = diag;
+ goto rollback;
}
diag = (*dev->dev_ops->dev_configure)(dev);
@@ -1259,7 +1279,8 @@ rte_eth_dev_configure(uint16_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
port_id, diag);
rte_eth_dev_rx_queue_config(dev, 0);
rte_eth_dev_tx_queue_config(dev, 0);
- return eth_err(port_id, diag);
+ ret = eth_err(port_id, diag);
+ goto rollback;
}
/* Initialize Rx profiling if enabled at compilation time. */
@@ -1269,10 +1290,16 @@ rte_eth_dev_configure(uint16_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
port_id, diag);
rte_eth_dev_rx_queue_config(dev, 0);
rte_eth_dev_tx_queue_config(dev, 0);
- return eth_err(port_id, diag);
+ ret = eth_err(port_id, diag);
+ goto rollback;
}
return 0;
+
+rollback:
+ memcpy(&dev->data->dev_conf, &orig_conf, sizeof(dev->data->dev_conf));
+
+ return ret;
}
void