aboutsummaryrefslogtreecommitdiffstats
path: root/docs
diff options
context:
space:
mode:
authorLuca Muscariello <muscariello@ieee.org>2020-03-23 06:44:55 +0000
committerGerrit Code Review <gerrit@fd.io>2020-03-23 06:44:55 +0000
commit4204e83413f46d42f65c961d473c56ec8a346934 (patch)
treee05837db83dceb1ffab12a40cb393358ae5a116f /docs
parent41d8204a49ed4bdec0e81aea9924780f2f5ffab8 (diff)
parent058f80a04fb24404c3f4396a45051fbc4ba05b62 (diff)
Merge "[HICN-551] Removed source code that uses acl"
Diffstat (limited to 'docs')
-rw-r--r--docs/source/vpp-plugin.md107
1 files changed, 92 insertions, 15 deletions
diff --git a/docs/source/vpp-plugin.md b/docs/source/vpp-plugin.md
index 0200e38b7..f93479da8 100644
--- a/docs/source/vpp-plugin.md
+++ b/docs/source/vpp-plugin.md
@@ -255,8 +255,7 @@ hicn fib {{add | delete } prefix <prefix> face <face_id> } | set strategy <strat
`hicn pgen client`: set an vpp forwarder as an hicn packet generator client.
```bash
-hicn pgen client fwd <ip|hicn> src <addr> n_ifaces <n_ifaces> name <prefix> lifetime <interest-lifetime> intfc <data in-interface> max_seq <max sequence number> n_flows <number of flows>
- <ip|hicn> :set if the underlying forwarder is configured as ip or hicn
+hicn pgen client src <addr> n_ifaces <n_ifaces> name <prefix> lifetime <interest-lifetime> intfc <data in-interface> max_seq <max sequence number> n_flows <number of flows>
<src_addr> :source address to use in the interests, i.e., the locator for routing the data packet back
<n_ifaces> :set the number of ifaces (consumer faces) to emulate. If more than one, each interest is sent <n_ifaces> times, each of it with a different source address calculated from <src_addr>
<prefix> :prefix to use to generate hICN names
@@ -269,24 +268,12 @@ hicn pgen client fwd <ip|hicn> src <addr> n_ifaces <n_ifaces> name <prefix> life
`hicn pgen server`: set an vpp forwarder as an hicn packet generator client.
```bash
-hicn pgen server fwd <ip|hicn> name <prefix> intfc <interest in-interface> size <payload_size>
- <ip|hicn> :set if the underlying forwarder is configured as ip or hicn
+hicn pgen server name <prefix> intfc <interest in-interface> size <payload_size>
<prefix> :prefix to use to reply to interest
<interest in-interface> :interface through which the forwarder receives interest
<payload_size> :size of the data payload
```
-`hicn punting`: manipulates punting rules.
-
-```bash
-hicn punting {add|delete} prefix <prefix> intfc <sw_if> {type ip | type <udp4|udp6> src_port <src_port> dst_port <dst_port>}
- <prefix> :prefix to punt to the hICN plugin
- <sw_if> :software interface where to apply the punting
- <ip|udp4|udp6> :creates a punting rule for hICN packet encapsulated into a ip4/6|udp tunnel or for regular hicn packet
- <src_port> :source port of the udp4/6 tunnel
- <dst_port> :destination port of the udp4/6 tunnel
-```
-
`hicn show`: show forwarder information.
```bash
@@ -369,3 +356,93 @@ Then `ping_client` on the host where forwarder B is running:
```bash
sudo ping_client -n b002::1
```
+
+### Example: packet generator
+
+The packet generator can be used to test the performace of the hICN plugin, as
+well as a tool to inject packet in a forwarder or network for other test use
+cases It is made of two entities, a client that inject interest into a vpp
+forwarder and a server that replies to any interest with the corresponding
+data. Both client and server can run on a vpp that is configured to forward
+interest and data as if they were regular ip packet or exploiting the hICN
+forwarding pipeline (through the hICN plugin). In the following examples we show
+how to configure the packet generator in both cases. We use two forwarder A and
+B as in the previous example. However, both the client and server packet
+generator can run on the same vpp forwarder is needed.
+
+
+#### IP Forwarding
+
+##### Forwarder A (client)
+
+```bash
+sudo vppctl
+vpp# set interface ip address TenGigabitEtherneta/0/0 2001::2/64
+vpp# set interface state TenGigabitEtherneta/0/0 up
+vpp# ip route add b001::/64 via 2001::3 TenGigabitEtherneta/0/0
+vpp# hicn pgen client src 2001::2 name b001::1/64 intfc TenGigabitEtherneta/0/0
+vpp# exec /<path_to>pg.conf
+vpp# packet-generator enable-stream hicn-pg
+```
+
+Where the file pg.conf contains the description of the stream to generate
+packets. In this case the stream sends 10 millions packets at a rate of 1Mpps
+
+```bash
+packet-generator new {
+ name hicn-pg
+ limit 10000000
+ size 74-74
+ node hicnpg-interest
+ rate 1e6
+ data {
+ TCP: 5001::2 -> 5001::1
+ hex 0x000000000000000050020000000001f4
+ }
+}
+```
+
+##### Forwarder B (server)
+
+```bash
+sudo vppctl
+vpp# set interface ip address TenGigabitEtherneta/0/1 2001::3/64
+vpp# set interface state TenGigabitEtherneta/0/1 up
+vpp# hicn pgen server name b001::1/64 intfc TenGigabitEtherneta/0/1
+```
+
+#### hICN Forwarding
+
+##### Forwarder A (client)
+
+```bash
+sudo vppctl
+vpp# set interface ip address TenGigabitEtherneta/0/0 2001::2/64
+vpp# set interface state TenGigabitEtherneta/0/0 up
+vpp# hicn face ip add remote 2001::3 intfc TenGigabitEtherneta/0/0
+vpp# hicn fib add prefix b001::/64 face 0
+vpp# create loopback interface
+vpp# set interface state loop0 up
+vpp# set interface ip address loop0 5002::1/64
+vpp# ip neighbor loop0 5002::2 de:ad:00:00:00:00
+vpp# hicn pgen client src 5001::2 name b001::1/64 intfc TenGigabitEtherneta/0/0
+vpp# exec /<path_to>pg.conf
+vpp# packet-generator enable-stream hicn-pg
+```
+
+The file pg.conf is the same showed in the previous example
+
+##### Forwarder B (server)
+
+```bash
+sudo vppctl
+vpp# set interface ip address TenGigabitEtherneta/0/1 2001::3/64
+vpp# set interface state TenGigabitEtherneta/0/1 up
+vpp# create loopback interface
+vpp# set interface state loop0 up
+vpp# set interface ip address loop0 2002::1/64
+vpp# ip neighbor loop1 2002::2 de:ad:00:00:00:00
+vpp# hicn face ip add remote 2002::2 intfc loop0
+vpp# hicn fib add prefix b001::/64 face 0
+vpp# hicn pgen server name b001::1/64 intfc loop0
+```