Revert to [HICN-638] Check if systemd is running before enabling hicn-light service

Signed-off-by: Mauro Sardara <msardara@cisco.com>
Change-Id: I1810d96e001a4e6e097e1efa331b682af750925d

1 files changed, 546 insertions, 0 deletions

diff --git a/hicn-plugin/src/hashtb.h b/hicn-plugin/src/hashtb.h
new file mode 100644
index 000000000..3c72fda65
--- /dev/null
+++ b/hicn-plugin/src/hashtb.h
@@ -0,0 +1,546 @@
+/*
+ * Copyright (c) 2017-2019 Cisco and/or its affiliates.
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef __HICN_HASHTB_H__
+#define __HICN_HASHTB_H__
+
+#include <stdint.h>
+#include <vppinfra/bihash_8_8.h>
+#include <vppinfra/bihash_24_8.h>
+
+#include "params.h"
+#include "parser.h"
+#include "error.h"
+
+/**
+ * @file hashtb.h
+ * Lookup is finding a hashtable record whose name matches the name being
+ * looked up.  Most of the lookup work is based on the hash value of the two
+ * names. Note that the intel cache line size is 64 bytes, and some platforms
+ * load in 2 cache lines together.
+ * - first step is to match a record at the bucket/slot level (htab has an
+ *   array of htbucket_t/htbc_elmt, where each bucket has 7 slots to hold indices
+ *   for entries.) Matching at this level implies
+ *   - the hashes of the lookup name and the record map to the same bucket
+ *   - the high 32 bits of the hashes (slot bce_hash_msb32s) match. Read
+ *     cost (on the hash table size, i.e. ignoring reading the name being
+ *     looked up):
+ *     - First step normally requires 1 cache line load to pull in the
+ *       64-byte htbucket_t with the 7 element slot table holding the
+ *       hash_msb32s.
+ *     - In the event (hopefully rare for a hash table with appropriate
+ *       number of buckets) that more than 7 elements hash to the same bucket,
+ *       lookup may well need to look not only at the static htbc_elmt_t but at
+ *       the chain of dynamically allocated htbc_elmt_t's linked to the static
+ *       htbc_elmt_t,  where each of these holds slot entries for additional elements.
+ *     - Before reaching that point, it is initially required to read in the
+ *       hash table record fields (ht_bucket_buf, htnode buf, etc) holding
+ *       pointers to the arrays, but these cache lines are common to all lookups
+ *       so will likely already be in the cache.
+ * - second step is to match at the record level (htnode/htkb level) once a
+ *   slot-level match happens. Matching at this level implies the following match
+ *   - the hash values (the full 64 bits vs. bucket+32 msb, above).
+ *   - the name which, on the hash table side, is stored as a list of htkb_t (key buffers).
+ *
+ * Some hashtables (for which rare false positives are tolerable) store hash
+ * values but no keys. (In ISM NDN forwarder, this was used for dcm_dpf: data
+ * cache manager's dataplane filter, where speed was critical and very rare
+ * false positives would be detected in the full dcm check.) - No key buffers
+ * are used (or even allocated at hash table creation).
+ */
+
+/* Handy abbreviations for success status, and for boolean values */
+#ifndef TRUE
+#define TRUE 1
+#endif
+
+#ifndef FALSE
+#define FALSE 0
+#endif
+
+#define HICN_HASH_INVALID_IDX  ~0
+/*
+ * for hicn_hashtb_next_node() iterator, this otherwise illegal context value
+ * indicates first call of iteration. Note: must not be 0, which is a legal
+ * context value.
+ */
+#define HICN_HASH_WALK_CTX_INITIAL (~((u64)0))
+
+/*
+ * Key memory allocation scheme.
+ *
+ * The key is the bytestring that a hashtable entry is storing, e.g. a fib
+ * prefix or packet name. The hash of the name is used not just to pick the
+ * bucket, but also as a surrogate for the actual key value.
+ *
+ * Client calls pass key/name as contiguous memory for lookup/add/delete but
+ * hashable stores its copy of the key/name as a list of one or more hash_key
+ * structs. - key memory is managed as a list of keys (cache line
+ * sized/aligned buffers). - If (keysize < 128) then use key struct's full
+ * 128 bytes - If not, first key struct is head of a linked list of elements
+ * where the first bytes are used for the key and the last 4 bytes are the
+ * index of the next entry (or an end marker). - key memory is generally the
+ * single largest use of memory in the hash table, especially for PIT, as
+ * names are bigger than node structs (which is also per name/entry).
+ *
+ */
+
+/* Compute hash node index from node pointer */
+#define NODE_IDX_FROM_NODE(p, h) \
+  (u32)((p) - ((h)->ht_nodes))
+
+#define HICN_HASH_KEY_BYTES   20
+
+typedef struct
+{
+  struct
+  {
+    u8 key[HICN_HASH_KEY_BYTES];
+  } ks;				/* Entire key in one block */
+} hicn_hash_key_t;
+
+/*
+ * Ratio of extra key blocks to allocate, in case the embedded ones aren't
+ * sufficient. This is the fraction of the number of entries allocated.
+ */
+#define HICN_HASHTB_KEY_RATIO 8
+
+/*
+ * hash node, used to store a hash table entry; indexed by an entry in a
+ * bucket. the node contains an embedded key; long keys are stored as chains
+ * of keys.
+ *
+ * The memory block for a node includes space for storing outgoing faces for
+ * interests, additional memory located off the end of the htnode data structure.
+ *
+ */
+
+/* Size this so that we can offer 64B aligned on 64-bits for storing outgoing
+ * faces information
+ */
+#define HICN_HASH_NODE_APP_DATA_SIZE 64
+
+/* How to align in the right way */
+typedef struct __attribute__ ((packed)) hicn_hash_node_s
+{
+  /* Bucket id containing the corresponding hash entry. */
+  u32 bucket_id;
+
+  /* Hash entry index in the bucket */
+  u32 entry_idx;
+
+  /* Total size of the key */
+  u16 hn_keysize;
+
+  /* 1 byte of flags for application use */
+  u8 hn_flags;
+
+  u8 _hn_reserved1;		/* TBD, to align what follows back to
+				 * 32 */
+
+  hicn_hash_key_t hn_key;	/* Key value embedded in the node, may chain
+				 * to more key buffers if necessary */
+
+  /* 32B + HICN_HASH_NODE_APP_DATA_SIZE */
+  /* Followed by app-specific data (fib or pit or cs entry, e.g.) */
+  u8 hn_data[HICN_HASH_NODE_APP_DATA_SIZE];
+
+} hicn_hash_node_t;
+
+#define HICN_HASH_NODE_FLAGS_DEFAULT     0x00
+#define HICN_HASH_NODE_CS_FLAGS          0x01
+#define HICN_HASH_NODE_OVERFLOW_BUCKET   0x02
+
+/*
+ * hicn_hash_entry_t Structure holding all or part of a hash value, a node
+ * index, and other key pieces of info.
+ *
+ * - 128 bytes/bucket with 19 bytes/entry gives 6 entries, or 5 entries plus
+ * next bucket ptr if overflow Changes in this structure will affect
+ * hicn_hash_bucket_t
+ */
+typedef struct __attribute__ ((packed)) hicn_hash_entry_s
+{
+
+  /* MSB of the hash value */
+  u64 he_msb64;
+
+  /* Index of node block */
+  u32 he_node;
+
+  /*
+   * Lock to prevent hash_node deletion while there are still interest
+   * or data referring to it
+   */
+  u32 locks;
+
+  /* Index of dpo (4B) */
+  index_t dpo_ctx_id;
+
+  /* A few flags, including 'this points to a chain of buckets' */
+  u8 he_flags;
+
+  /*
+   * Index of the virtual function table corresponding to the dpo_ctx
+   * strategy
+   */
+  u8 vft_id;
+
+} hicn_hash_entry_t;		//size 22B
+
+STATIC_ASSERT (sizeof (index_t) <= 4, "sizeof index_t is greater than 4B");
+
+
+#define HICN_HASH_ENTRY_FLAGS_DEFAULT  0x00
+
+/* If entry is PIT this flag is 0 */
+#define HICN_HASH_ENTRY_FLAG_CS_ENTRY  0x01
+
+/*
+ * This entry heads a chain of overflow buckets (we expect to see this only
+ * in the last entry in a bucket.) In this case, the index is to an overflow
+ * bucket rather than to a single node block.
+ */
+#define HICN_HASH_ENTRY_FLAG_OVERFLOW  0x04
+
+/* This entry has been marked for deletion */
+#define HICN_HASH_ENTRY_FLAG_DELETED   0x08
+
+/* Use fast he_timeout units for expiration, slow if not */
+#define HICN_HASH_ENTRY_FLAG_FAST_TIMEOUT 0x10
+
+/*
+ * hash bucket: Contains an array of entries. Cache line sized/aligned, so no
+ * room for extra fields unless bucket size is increased to 2 cache lines or
+ * the entry struct shrinks.
+ */
+
+/*
+ * Overflow bucket ratio as a fraction of the fixed/configured count; a pool
+ * of hash buckets used if a row in the fixed table overflows.
+ */
+#define HICN_HASHTB_BUCKET_ENTRIES 5
+
+typedef struct __attribute__ ((packed))
+{
+  hicn_hash_entry_t hb_entries[HICN_HASHTB_BUCKET_ENTRIES];
+  u64 align1;
+  u64 align2;
+  u16 align3;
+} hicn_hash_bucket_t;
+
+/* Overall target fill-factor for the hashtable */
+#define HICN_HASHTB_FILL_FACTOR    4
+
+#define HICN_HASHTB_MIN_ENTRIES  (1 << 4)	// includes dummy node 0 entry
+#define HICN_HASHTB_MAX_ENTRIES  (1 << 24)
+
+#define HICN_HASHTB_MIN_BUCKETS (1 << 10)
+
+/*
+ * htab_t
+ *
+ * Hash table main structure.
+ *
+ * Contains - pointers to dynamically allocated arrays of cache-line
+ * sized/aligned structures (buckets, nodes, keys). Put frequently accessed
+ * fields in the first cache line.
+ */
+typedef struct hicn_hashtb_s
+{
+
+  /* 8B - main array of hash buckets */
+  hicn_hash_bucket_t *ht_buckets;
+
+  /* 8B - just-in-case block of overflow buckets */
+  hicn_hash_bucket_t *ht_overflow_buckets;
+
+  /* 8B - block of nodes associated with entries in buckets */
+  hicn_hash_node_t *ht_nodes;
+
+  /* Flags */
+  u32 ht_flags;
+
+  /* Count of buckets allocated in the main array */
+  u32 ht_bucket_count;
+
+  /* Count of overflow buckets allocated */
+  u32 ht_overflow_bucket_count;
+  u32 ht_overflow_buckets_used;
+
+  /* Count of nodes allocated */
+  u32 ht_node_count;
+  u32 ht_nodes_used;
+
+  /* Count of overflow key structs allocated */
+  u32 ht_key_count;
+  u32 ht_keys_used;
+
+} hicn_hashtb_t, *hicn_hashtb_h;
+
+/*
+ * Offset to aligned start of additional data (PIT/CS, FIB) embedded in each
+ * node.
+ */
+extern u32 ht_node_data_offset_aligned;
+
+/* Flags for hashtable */
+
+#define HICN_HASHTB_FLAGS_DEFAULT    0x00
+
+/*
+ * Don't use the last entry in each bucket - only use it for overflow. We use
+ * this for the FIB, currently, so that we can support in-place FIB changes
+ * that would be difficult if there were hash entry copies as part of
+ * overflow handling.
+ */
+#define HICN_HASHTB_FLAG_USE_SEVEN      0x04
+#define HICN_HASHTB_FLAG_KEY_FMT_PFX    0x08
+#define HICN_HASHTB_FLAG_KEY_FMT_NAME   0x10
+
+/*
+ * Max prefix name components we'll support in our incremental hashing;
+ * currently used only for LPM in the FIB.
+ */
+#define HICN_HASHTB_MAX_NAME_COMPS HICN_PARAM_FIB_ENTRY_PFX_COMPS_MAX
+
+/*
+ * APIs and inlines
+ */
+
+/* Compute hash node index from node pointer */
+static inline u32
+hicn_hashtb_node_idx_from_node (hicn_hashtb_h h, hicn_hash_node_t * p)
+{
+  return (p - h->ht_nodes);
+}
+
+/* Retrieve a hashtable node by node index */
+static inline hicn_hash_node_t *
+hicn_hashtb_node_from_idx (hicn_hashtb_h h, u32 idx)
+{
+  return (pool_elt_at_index (h->ht_nodes, idx));
+}
+
+/* Allocate a brand-new hashtable */
+int
+hicn_hashtb_alloc (hicn_hashtb_h * ph, u32 max_elems, size_t app_data_size);
+
+/* Free a hashtable, including its embedded arrays */
+int hicn_hashtb_free (hicn_hashtb_h * ph);
+
+/* Hash a bytestring, currently using bihash */
+u64 hicn_hashtb_hash_bytestring (const u8 * key, u32 keylen);
+
+always_inline hicn_hash_entry_t *
+hicn_hashtb_get_entry (hicn_hashtb_h h, u32 entry_idx, u32 bucket_id,
+		       u8 bucket_overflow)
+{
+  hicn_hash_bucket_t *bucket;
+  if (bucket_overflow)
+    bucket = pool_elt_at_index (h->ht_overflow_buckets, bucket_id);
+  else
+    bucket = (hicn_hash_bucket_t *) (h->ht_buckets + bucket_id);
+
+  return &(bucket->hb_entries[entry_idx]);
+}
+
+/* Hash a name, currently using bihash */
+always_inline u64
+hicn_hashtb_hash_name (const u8 * key, u16 keylen)
+{
+  if (key != NULL && keylen == HICN_V4_NAME_LEN)
+    {
+      clib_bihash_kv_8_8_t kv;
+      kv.key = ((u64 *) key)[0];
+      return clib_bihash_hash_8_8 (&kv);
+    }
+  else if (key != NULL && keylen == HICN_V6_NAME_LEN)
+    {
+      clib_bihash_kv_24_8_t kv;
+      kv.key[0] = ((u64 *) key)[0];
+      kv.key[1] = ((u64 *) key)[1];
+      kv.key[2] = ((u32 *) key)[4];
+      return clib_bihash_hash_24_8 (&kv);
+    }
+  else
+    {
+      return (-1LL);
+    }
+}
+
+
+/*
+ * Prepare a hashtable node for insertion, supplying the key and computed
+ * hash info. This sets up the node->key relationship, possibly allocating
+ * overflow key buffers.
+ */
+void
+hicn_hashtb_init_node (hicn_hashtb_h h, hicn_hash_node_t * node,
+		       const u8 * key, u32 keylen);
+
+/*
+ * Insert a node into the hashtable. We expect the caller has used the init
+ * api to set the node key and hash info, and populated the extra data area
+ * (if any) - or done the equivalent work itself.
+ */
+int
+hicn_hashtb_insert (hicn_hashtb_h h, hicn_hash_node_t * node,
+		    hicn_hash_entry_t ** hash_entry, u64 hash,
+		    u32 * node_id,
+		    index_t * dpo_ctx_id, u8 * vft_id, u8 * is_cs,
+		    u8 * hash_entry_id, u32 * bucket_id,
+		    u8 * bucket_is_overflow);
+
+/*
+ * Basic api to lookup a specific hash+key tuple. This does the entire lookup
+ * operation, retrieving node structs and comparing keys, so it's not
+ * optimized for prefetching or high performance.
+ *
+ * Returns zero and mails back a node on success, errno otherwise.
+ */
+int
+hicn_hashtb_lookup_node (hicn_hashtb_h h, const u8 * key,
+			 u32 keylen, u64 hashval, u8 is_data,
+			 u32 * node_id, index_t * dpo_ctx_id, u8 * vft_id,
+			 u8 * is_cs, u8 * hash_entry_id, u32 * bucket_id,
+			 u8 * bucket_is_overflow);
+
+/*
+ * Extended api to lookup a specific hash+key tuple. The implementation
+ * allows the caller to locate nodes that are marked for deletion; this is
+ * part of some hashtable applications, such as the FIB.
+ *
+ * This does the entire lookup operation, retrieving node structs and comparing
+ * keys, so it's not optimized for prefetching or high performance.
+ *
+ * Returns zero and mails back a node on success, errno otherwise.
+ */
+int
+hicn_hashtb_lookup_node_ex (hicn_hashtb_h h, const u8 * key,
+			    u32 keylen, u64 hashval, u8 is_data,
+			    int include_deleted_p, u32 * node_id,
+			    index_t * dpo_ctx_id, u8 * vft_id, u8 * is_cs,
+			    u8 * hash_entry_id, u32 * bucket_id,
+			    u8 * bucket_is_overflow);
+
+/**
+ * @brief Compares the key in the node with the given key
+ *
+ * This function allows to split the hash verification from the comparison of
+ * the entire key. Useful to exploit prefertching.
+ * @result 1 if equals, 0 otherwise
+ */
+int hicn_node_compare (const u8 * key, u32 keylen, hicn_hash_node_t * node);
+
+/*
+ * Remove a node from a hashtable using the node itself. The internal data
+ * structs are cleaned up, but the node struct itself is not: the caller must
+ * free the node itself.
+ */
+void hicn_hashtb_remove_node (hicn_hashtb_h h, hicn_hash_node_t * node,
+			      u64 hashval);
+
+/*
+ * Delete a node from a hashtable using the node itself, and delete/free the
+ * node.  Caller's pointer is cleared on success.
+ */
+void hicn_hashtb_delete (hicn_hashtb_h h, hicn_hash_node_t ** pnode,
+			 u64 hashval);
+
+/*
+ * Utility to init a new entry in a hashtable bucket/row. We use this to add
+ * new a node+hash, and to clear out an entry during removal.
+ */
+void
+hicn_hashtb_init_entry (hicn_hash_entry_t * entry,
+			u32 nodeidx, u64 hashval, u32 locks);
+
+
+/*
+ * Return data area embedded in a hash node struct. We maintain an 'offset'
+ * value in case the common node body struct doesn't leave the data area
+ * aligned properly.
+ */
+static inline void *
+hicn_hashtb_node_data (hicn_hash_node_t * node)
+{
+  return ((u8 *) (node) + ht_node_data_offset_aligned);
+}
+
+/*
+ * Use some bits of the low half of the hash to locate a row/bucket in the
+ * table
+ */
+static inline u32
+hicn_hashtb_bucket_idx (hicn_hashtb_h h, u64 hashval)
+{
+  return ((u32) (hashval & (h->ht_bucket_count - 1)));
+}
+
+/*
+ * Return a hash node struct from the free list, or NULL. Note that the
+ * returned struct is _not_ cleared/zeroed - init is up to the caller.
+ */
+static inline hicn_hash_node_t *
+hicn_hashtb_alloc_node (hicn_hashtb_h h)
+{
+  hicn_hash_node_t *p = NULL;
+
+  if (h->ht_nodes_used < h->ht_node_count)
+    {
+      pool_get_aligned (h->ht_nodes, p, 8);
+      h->ht_nodes_used++;
+    }
+  return (p);
+}
+
+/*
+ * Release a hashtable node back to the free list when an entry is cleared
+ */
+void hicn_hashtb_free_node (hicn_hashtb_h h, hicn_hash_node_t * node);
+
+/*
+ * Walk a hashtable, iterating through the nodes, keeping context in 'ctx'
+ * between calls.
+ *
+ * Set the context value to HICN_HASH_WALK_CTX_INITIAL to start an iteration.
+ */
+int
+hicn_hashtb_next_node (hicn_hashtb_h h, hicn_hash_node_t ** pnode, u64 * ctx);
+
+
+int
+hicn_hashtb_key_to_str (hicn_hashtb_h h, const hicn_hash_node_t * node,
+			char *buf, int bufsize, int must_fit);
+
+/*
+ * single hash full name can pass offset for two hashes calculation in case
+ * we use CS and PIT in a two steps hashes (prefix + seqno)
+ */
+always_inline int
+hicn_hashtb_fullhash (const u8 * name, u16 namelen, u64 * name_hash)
+{
+  *name_hash = hicn_hashtb_hash_name (name, namelen);
+  return (*name_hash != (-1LL) ? HICN_ERROR_NONE : HICN_ERROR_HASHTB_INVAL);
+}
+
+#endif /* // __HICN_HASHTB_H__ */
+
+/*
+ * fd.io coding-style-patch-verification: ON
+ *
+ * Local Variables: eval: (c-set-style "gnu") End:
+ */