[HICN-574] Host stack plugin for VPP.

Signed-off-by: Mauro Sardara <msardara@cisco.com>
Change-Id: I8d8fdffef31a7013265d6529c5f52f3d5ec70d18
Signed-off-by: Mauro Sardara <msardara@cisco.com>
Signed-off-by: Mauro <you@example.com>
Signed-off-by: Mauro Sardara <msardara@cisco.com>

1 files changed, 188 insertions, 0 deletions

diff --git a/hicn-plugin/src/host_stack/testbed/startup-client.conf b/hicn-plugin/src/host_stack/testbed/startup-client.conf
new file mode 100644
index 000000000..fb0c89c87
--- /dev/null
+++ b/hicn-plugin/src/host_stack/testbed/startup-client.conf
@@ -0,0 +1,188 @@
+
+unix {
+  nodaemon
+  interactive
+  log /var/log/vpp/vpp.log
+  full-coredump
+  cli-listen /run/vpp/cli.sock
+  gid vpp
+  startup-config /home/ubuntu/host-stack/vpp/testbed/client-startup.txt
+}
+
+api-trace {
+## This stanza controls binary API tracing. Unless there is a very strong reason,
+## please leave this feature enabled.
+  on
+## Additional parameters:
+##
+## To set the number of binary API trace records in the circular buffer, configure nitems
+##
+## nitems <nnn>
+##
+## To save the api message table decode tables, configure a filename. Results in /tmp/<filename>
+## Very handy for understanding api message changes between versions, identifying missing
+## plugins, and so forth.
+##
+## save-api-table <filename>
+}
+
+api-segment {
+  gid vpp
+}
+
+socksvr {
+  default
+}
+
+cpu {
+	## In the VPP there is one main thread and optionally the user can create worker(s)
+	## The main thread and worker thread(s) can be pinned to CPU core(s) manually or automatically
+
+	## Manual pinning of thread(s) to CPU core(s)
+
+	## Set logical CPU core where main thread runs, if main core is not set
+	## VPP will use core 1 if available
+	main-core 1
+
+	## Set logical CPU core(s) where worker threads are running
+	# corelist-workers 2-3,18-19
+
+	## Automatic pinning of thread(s) to CPU core(s)
+
+	## Sets number of CPU core(s) to be skipped (1 ... N-1)
+	## Skipped CPU core(s) are not used for pinning main thread and working thread(s).
+	## The main thread is automatically pinned to the first available CPU core and worker(s)
+	## are pinned to next free CPU core(s) after core assigned to main thread
+	# skip-cores 4
+
+	## Specify a number of workers to be created
+	## Workers are pinned to N consecutive CPU cores while skipping "skip-cores" CPU core(s)
+	## and main thread's CPU core
+	# workers 2
+
+	## Set scheduling policy and priority of main and worker threads
+
+	## Scheduling policy options are: other (SCHED_OTHER), batch (SCHED_BATCH)
+	## idle (SCHED_IDLE), fifo (SCHED_FIFO), rr (SCHED_RR)
+	# scheduler-policy fifo
+
+	## Scheduling priority is used only for "real-time policies (fifo and rr),
+	## and has to be in the range of priorities supported for a particular policy
+	# scheduler-priority 50
+}
+
+buffers {
+	## Increase number of buffers allocated, needed only in scenarios with
+	## large number of interfaces and worker threads. Value is per numa node.
+# Default is 16384 (8192 if running unpriviledged)
+	buffers-per-numa 600000
+	## Size of buffer data area
+	## Default is 2048
+	# default data-size 2048
+}
+
+# dpdk {
+	## Change default settings for all interfaces
+	# dev default {
+		## Number of receive queues, enables RSS
+		## Default is 1
+		# num-rx-queues 3
+
+		## Number of transmit queues, Default is equal
+		## to number of worker threads or 1 if no workers treads
+		# num-tx-queues 3
+
+		## Number of descriptors in transmit and receive rings
+		## increasing or reducing number can impact performance
+		## Default is 1024 for both rx and tx
+		# num-rx-desc 512
+		# num-tx-desc 512
+
+		## VLAN strip offload mode for interface
+		## Default is off
+		# vlan-strip-offload on
+
+		## TCP Segment Offload
+		## Default is off
+		## To enable TSO, 'enable-tcp-udp-checksum' must be set
+		# tso on
+
+		## Devargs
+                ## device specific init args
+                ## Default is NULL
+		# devargs safe-mode-support=1,pipeline-mode-support=1
+	# }
+
+	## Whitelist specific interface by specifying PCI address
+	# dev 0000:13:00.0
+
+	## Blacklist specific device type by specifying PCI vendor:device
+        ## Whitelist entries take precedence
+	# blacklist 8086:10fb
+
+	## Set interface name
+	# dev 0000:02:00.1 {
+	#	name eth0
+	# }
+
+	## Whitelist specific interface by specifying PCI address and in
+	## addition specify custom parameters for this interface
+	# dev 0000:02:00.1 {
+	#	num-rx-queues 2
+	# }
+
+	## Change UIO driver used by VPP, Options are: igb_uio, vfio-pci,
+	## uio_pci_generic or auto (default)
+	# uio-driver vfio-pci
+
+	## Disable multi-segment buffers, improves performance but
+	## disables Jumbo MTU support
+	# no-multi-seg
+
+	## Change hugepages allocation per-socket, needed only if there is need for
+	## larger number of mbufs. Default is 256M on each detected CPU socket
+	# socket-mem 2048,2048
+
+	## Disables UDP / TCP TX checksum offload. Typically needed for use
+	## faster vector PMDs (together with no-multi-seg)
+	# no-tx-checksum-offload
+
+	## Enable UDP / TCP TX checksum offload
+	## This is the reversed option of 'no-tx-checksum-offload'
+	# enable-tcp-udp-checksum
+# }
+
+
+plugins {
+	## Adjusting the plugin path depending on where the VPP plugins are
+	path /home/ubuntu/host-stack/vpp/build-root/install-vpp_debug-native/vpp/lib/x86_64-linux-gnu/vpp_plugins:/home/ubuntu/host-stack/vpp/build-root/install-vpp_debug-native/vpp/lib/vpp_plugins:/home/ubuntu/host-stack/install/lib/vpp_plugins
+	## Disable all plugins by default and then selectively enable specific plugins
+	plugin default { enable }
+	plugin dpdk_plugin.so { disable }
+	plugin hicn_plugin.so { enable }
+#        plugin hicn_plugin.so { enable }
+        
+
+	## Enable all plugins by default and then selectively disable specific plugins
+	# plugin dpdk_plugin.so { disable }
+	# plugin acl_plugin.so { disable }
+}
+
+## Statistics Segment
+# statseg {
+    # socket-name <filename>, name of the stats segment socket
+    #     defaults to /run/vpp/stats.sock
+    # size <nnn>[KMG], size of the stats segment, defaults to 32mb
+    # per-node-counters on | off, defaults to none
+    # update-interval <f64-seconds>, sets the segment scrape / update interval
+# }
+
+#hicn { 
+#    pit-size 2000000  
+#    cs-size 1000000 
+#    cs-reserved-app 10
+#}
+
+session { evt_qs_memfd_seg  }
+socksvr { socket-name /tmp/vpp-api.sock}
+tcp {cc-algo cubic}