summaryrefslogtreecommitdiffstats
path: root/utils/sysrepo-plugins/README.md
diff options
context:
space:
mode:
authorMauro Sardara <msardara@cisco.com>2019-09-23 19:34:23 +0200
committerMauro Sardara <msardara@cisco.com>2019-09-24 11:14:16 +0200
commita0da41b243661a039481d2c254d7db8f55f18d2b (patch)
treee06e06a609588ceb8f5e293abc02a4a02da39d4d /utils/sysrepo-plugins/README.md
parentd6bd901a818e10f2e224bfaaaf20b39b60b6009f (diff)
[HICN-279] Added libmemif packaging.
Change-Id: Ie8662059163b7a01211bb18fb8f6b77bbbc07279 Signed-off-by: Mauro Sardara <msardara@cisco.com>
Diffstat (limited to 'utils/sysrepo-plugins/README.md')
-rw-r--r--utils/sysrepo-plugins/README.md329
1 files changed, 0 insertions, 329 deletions
diff --git a/utils/sysrepo-plugins/README.md b/utils/sysrepo-plugins/README.md
deleted file mode 100644
index 3f0ed2e34..000000000
--- a/utils/sysrepo-plugins/README.md
+++ /dev/null
@@ -1,329 +0,0 @@
-# Sysrepo plugin for hicn-plugin (2019)
-
-These plugins serve as a data management agent. They provide yang models via NETCONF to allow the management of hicn-light, and hicn-plugin which runs in VPP instance from out-of-box.
-
-## Software Requirement
-
-- VPP
-
-- sysrepo
-
-- hicn-plugin
-
-- hicn-light
-
-## hICN yang model
-
-You can install the yang model using the following bash script:
-
-EXIT_CODE=0
-command -v sysrepoctl > /dev/null
-if [ $? != 0 ]; then
- echo "Could not find command \"sysrepoctl\"."
- exit ${EXIT_CODE}
-else
-sysrepoctl --install --yang=path_to_hicn_yang_model
-fi
-
-hicn.yang can be found in the yang-model. It consists of two container nodes: hicn-conf and hicn-state. One is used to hold the configuration data (i.e., hicn-conf) and one for providing the state data (i.e., hicn-state). The hicn-conf has one node, params, which contains the hICN configuration parameters. Controler can configure these parameters through the edit-config RPC call. This node can be used to enable and to initialize the hicn-plugin in VPP instance. Hicn-state container is used to provide the state data to the controler. It consists of state, strategy, strategies, route, and face-ip-params nodes with the coresponding leaves. In hicn model variety of RPCs are provided to allow controler to communicate with hicn-plugin as well as update the state data in hicn-state. Here you can find the schematic view of the described hicn model:
-
-
-module: hicn
- +--rw hicn-conf
- | +--rw params
- | +--rw enable_disable? boolean
- | +--rw pit_max_size? int32
- | +--rw cs_max_size? int32
- | +--rw cs_reserved_app? int32
- | +--rw pit_dflt_lifetime_sec? float
- | +--rw pit_max_lifetime_sec? float
- | +--rw pit_min_lifetime_sec? float
- +--ro hicn-state
- +--ro states
- | +--ro pkts_processed? uint64
- | +--ro pkts_interest_count? uint64
- | +--ro pkts_data_count? uint64
- | +--ro pkts_from_cache_count? uint64
- | +--ro pkts_no_pit_count? uint64
- | +--ro pit_expired_count? uint64
- | +--ro cs_expired_count? uint64
- | +--ro cs_lru_count? uint64
- | +--ro pkts_drop_no_buf? uint64
- | +--ro interests_aggregated? uint64
- | +--ro interests_retx? uint64
- | +--ro interests_hash_collision? uint64
- | +--ro pit_entries_count? uint64
- | +--ro cs_entries_count? uint64
- | +--ro cs_entries_ntw_count? uint64
- +--ro strategy
- | +--ro description? uint8
- +--ro route
- | +--ro faceids? uint16
- | +--ro strategy_id? uint32
- +--ro strategies
- | +--ro n_strategies? uint8
- | +--ro strategy_id? uint32
- +--ro face-ip-params
- +--ro nh_addr? uint64
- +--ro swif? uint32
- +--ro flags? uint32
-
-
-To setup the startup configuration you can use the following script:
-
-EXIT_CODE=0
-command -v sysrepocfg > /dev/null
-if [ $? != 0 ]; then
- echo "Could not find command \"sysrepocfg\"."
- exit ${EXIT_CODE}
-else
-sysrepocfg -d startup -i path_to_startup_xml -f xml hicn
-fi
-
-
-startup.xml is placed in the yang-model. Here you can find the content:
-
-<hicn-conf xmlns="urn:sysrepo:hicn">
-<params>
- <enable_disable>false</enable_disable>
- <pit_max_size>-1</pit_max_size>
- <cs_max_size>-1</cs_max_size>
- <cs_reserved_app>-1</cs_reserved_app>
- <pit_dflt_lifetime_sec>-1</pit_dflt_lifetime_sec>
- <pit_max_lifetime_sec>-1</pit_max_lifetime_sec>
- <pit_min_lifetime_sec>-1</pit_min_lifetime_sec>
-</params>
-</hicn-conf>
-
-As can be seen, it contains the leaves of the params in hicn-conf node which is used as the startup configuration. This configuration can be changed through the controler by subscribing which changes the target to the running state. hicn yang model provides a list of RPCs which allows controler to communicate directly with the hicn-plugin. This RPCs may also cause the modification in state data. Here you can find the list of RPCs:
-
- rpcs:
- +---x node-params-set
- | +---w input
- | +---w enable_disable? boolean
- | +---w pit_max_size? int32
- | +---w cs_max_size? int32
- | +---w cs_reserved_app? int32
- | +---w pit_dflt_lifetime_sec? float
- | +---w pit_max_lifetime_sec? float
- | +---w pit_min_lifetime_sec? float
- +---x node-params-get
- +---x node-stat-get
- +---x strategy-get
- | +---w input
- | +---w strategy_id? uint32
- +---x strategies-get
- +---x route-get
- | +---w input
- | +---w prefix0? uint64
- | +---w prefix1? uint64
- | +---w len? uint8
- +---x route-del
- | +---w input
- | +---w prefix0? uint64
- | +---w prefix1? uint64
- | +---w len? uint8
- +---x route-nhops-add
- | +---w input
- | +---w prefix0? uint64
- | +---w prefix1? uint64
- | +---w len? uint8
- | +---w face_ids0? uint32
- | +---w face_ids1? uint32
- | +---w face_ids2? uint32
- | +---w face_ids3? uint32
- | +---w face_ids4? uint32
- | +---w face_ids5? uint32
- | +---w face_ids6? uint32
- | +---w n_faces? uint8
- +---x route-nhops-del
- | +---w input
- | +---w prefix0? uint64
- | +---w prefix1? uint64
- | +---w len? uint8
- | +---w faceid? uint16
- +---x face-ip-params-get
- | +---w input
- | +---w faceid? uint16
- +---x face-ip-add
- | +---w input
- | +---w nh_addr0? uint64
- | +---w nh_addr1? uint64
- | +---w swif? uint32
- +---x face-ip-del
- | +---w input
- | +---w faceid? uint16
- +---x punting-add
- | +---w input
- | +---w prefix0? uint64
- | +---w prefix1? uint64
- | +---w len? uint8
- | +---w swif? uint32
- +---x punting-del
- +---w input
- +---w prefix0? uint64
- +---w prefix1? uint64
- +---w len? uint8
- +---w swif? uint32
-
-
-In order to run different RPCs from controler you can use the examples in the controler_rpcs_instances.xml in the yang-model. Here you can find the content:
-
-<node-params-get xmlns="urn:sysrepo:hicn"/>
-
-<node-stat-get xmlns="urn:sysrepo:hicn"/>
-
-<strategy-get xmlns="urn:sysrepo:hicn">
- <strategy_id>0</strategy_id>
-</strategy-get>
-
-<strategies-get xmlns="urn:sysrepo:hicn"/>
-
-
-<route-get xmlns="urn:sysrepo:hicn">
- <prefix0>10</prefix0>
- <prefix1>20</prefix1>
- <len>30</len>
-</route-get>
-
-<route-del xmlns="urn:sysrepo:hicn">
- <prefix0>10</prefix0>
- <prefix1>20</prefix1>
- <len>30</len>
-</route-del>
-
-<route-nhops-add xmlns="urn:sysrepo:hicn">
- <prefix0>10</prefix0>
- <prefix1>20</prefix1>
- <len>30</len>
- <face_ids0>40</face_ids0>
- <face_ids1>50</face_ids1>
- <face_ids2>60</face_ids2>
- <face_ids3>70</face_ids3>
- <face_ids4>80</face_ids4>
- <face_ids5>90</face_ids5>
- <face_ids6>100</face_ids6>
- <n_faces>110</n_faces>
-</route-nhops-add>
-
-<route-nhops-del xmlns="urn:sysrepo:hicn">
- <prefix0>10</prefix0>
- <prefix1>20</prefix1>
- <len>30</len>
- <faceid>40</faceid>
-</route-nhops-del>
-
-
-<face-ip-params-get xmlns="urn:sysrepo:hicn">
- <faceid>10</faceid>
-</face-ip-params-get>
-
-<face-ip-add xmlns="urn:sysrepo:hicn">
- <nh_addr0>10</nh_addr0>
- <nh_addr1>20</nh_addr1>
- <swif>30</swif>
-</face-ip-add>
-
-<face-ip-del xmlns="urn:sysrepo:hicn">
- <faceid>0</faceid>
-</face-ip-del>
-
-<punting-add xmlns="urn:sysrepo:hicn">
- <prefix0>10</prefix0>
- <prefix1>20</prefix1>
- <len>30</len>
- <swif>40</swif>
-</punting-add>
-
-
-<punting-del xmlns="urn:sysrepo:hicn">
- <prefix0>10</prefix0>
- <prefix1>20</prefix1>
- <len>30</len>
- <swif>40</swif>
-</punting-del>
-
-
-## Run the plugin
-
-Firstly, verify the plugin and binary libraries are located correctly, then run the vpp through (service vpp start). Next, run the sysrepo daemon (sysrepod), for debug mode: sysrepo -d -l 4 which runs with high verbosity. Then, run the sysrepo plugin (sysrepo-plugind), for debug mode: sysrep-plugind -d -l 4 which runs with high verbosity. Now, the hicn sysrepo plugin is loaded. Then, run the netopeer2-server which serves as NETCONF server.
-
-## Connect from netopeer2-cli
-
-In order to connect through the netopeer client run the netopeer2-cli. Then, follow these steps:
-
-connect --host XXX --login XXX
---> get (you can get the configuration and operational data)
---> get-config (you can get the configuratoin data)
---> edit-config --target running --config (you can modify the configuration but it needs an xml configuration input. For example,
-<hicn-conf xmlns="urn:sysrepo:hicn">
-<params>
- <enable_disable>false</enable_disable>
- <pit_max_size>-1</pit_max_size>
- <cs_max_size>-1</cs_max_size>
- <cs_reserved_app>-1</cs_reserved_app>
- <pit_dflt_lifetime_sec>-1</pit_dflt_lifetime_sec>
- <pit_max_lifetime_sec>-1</pit_max_lifetime_sec>
- <pit_min_lifetime_sec>-1</pit_min_lifetime_sec>
-</params>
-</hicn-conf>
-)
---> user-rpc (you can call one of the rpc proposed by hicn model but it needs an xml input, you can pick one in controler_rpcs_instances.xml)
-
-## Connect from OpenDayligh (ODL) controller
-
-In order to connect througt the OpenDaylight follow these procedure:
-
-- run karaf distribution (./opendayligh_installation_folder/bin/karaf)
-- install the required feature list in DOL (feature:install odl-netconf-server odl-netconf-connector odl-restconf-all odl-netconf-topology or
- odl-netconf-clustered-topology)
-- run a rest client program (e.g., postman or RESTClient)
-- mount the remote netopeer2-server to the OpenDaylight by the following REST API:
-
-PUT http://localhost:8181/restconf/config/network-topology:network-topology/topology/topology-netconf/node/hicn-node
-
-with the following body
-
- <node xmlns="urn:TBD:params:xml:ns:yang:network-topology">
- <node-id>hicn-node</node-id>
- <host xmlns="urn:opendaylight:netconf-node-topology">Remote_NETCONF_SERVER_IP</host>
- <port xmlns="urn:opendaylight:netconf-node-topology">830</port>
- <username xmlns="urn:opendaylight:netconf-node-topology">username</username>
- <password xmlns="urn:opendaylight:netconf-node-topology">password</password>
- <tcp-only xmlns="urn:opendaylight:netconf-node-topology">false</tcp-only>
- <keepalive-delay xmlns="urn:opendaylight:netconf-node-topology">1</keepalive-delay>
- </node>
-
-Note that the header files must be set to Content-Type: application/xml, Accept: application/xml. There are more options which can be set but for simplicity we keep a short configuration to mount the remote node.
-
-- send the operation through the following REST API:
-
-POST http://localhost:8181/restconf/operations/network-topology:network-topology/topology/topology-netconf/node/hicn-node/yang-ext:mount/ietf-netconf:edit-config
-
-The body can be used the same as edit-config in netopeer2-cli.
-
-## Connect from Network Services Orchestrator (NSO)
-
-To connect NSO to the netopeer2-server, first, you need to write a NED package for your device. The procudeure to create NED for hicn is explaned in the following:
-
-Place hicn.yang model in a folder called hicn-yang-model, and follow these steps:
-
-- ncs-make-package --netconf-ned ./hicn-yang-model ./hicn-nso
-- cd hicn-nso/src; make
-- ncs-setup --ned-package ./hicn-nso --dest ./hicn-nso-project
-- cd hicn-nso-project
-- ncs
-- ncs_cli -C -u admin
-- configure
-- devices authgroups group authhicn default-map remote-name user_name remote-password password
-- devices device hicn address IP_device port 830 authgroup authhicn device-type netconf
-- state admin-state unlocked
-- commit
-- ssh fetch-host-keys
-
-At this point, we are able to connect to the remote device.
-
-
-## Release note
-
-The current version is compatible with the 19.01 VPP stable and sysrepo 0.7.7.