summaryrefslogtreecommitdiffstats
path: root/ctrl/sysrepo-plugins/README.md
diff options
context:
space:
mode:
Diffstat (limited to 'ctrl/sysrepo-plugins/README.md')
-rw-r--r--ctrl/sysrepo-plugins/README.md241
1 files changed, 0 insertions, 241 deletions
diff --git a/ctrl/sysrepo-plugins/README.md b/ctrl/sysrepo-plugins/README.md
deleted file mode 100644
index 0940fff67..000000000
--- a/ctrl/sysrepo-plugins/README.md
+++ /dev/null
@@ -1,241 +0,0 @@
-# Sysrepo plugin for hicn-plugin (2019)
-
-These plugins serve as a data management agent. They provide yang models via
-NETCONF to allow the management of hicn-light, and hicn-plugin which runs in VPP
-instance from out-of-box.
-
-## Software Requirement
-
-- VPP
-
-- sysrepo
-
-- hicn-plugin
-
-- hicn-light
-
-## hICN yang model
-
-You can install the yang model using the following bash script:
-```
-EXIT_CODE=0
-command -v sysrepoctl > /dev/null
-if [ $? != 0 ]; then
- echo "Could not find command \"sysrepoctl\"."
- exit ${EXIT_CODE}
-else
-sysrepoctl --install --yang=path_to_hicn_yang_model
-fi
-```
-hicn.yang can be found in the yang-model. It consists of two container nodes:
-hicn-conf and hicn-state. One is used to hold the configuration data (i.e.,
-hicn-conf) and one for providing the state data (i.e., hicn-state). The
-hicn-conf has one node, params, which contains the hICN configuration
-parameters. A controller can configure these parameters through the edit-config RPC
-call. This node can be used to enable and to initialize the hicn-plugin in VPP
-instance. Hicn-state container is used to provide the state data to the
-controller. It consists of state, strategy, strategies, route, and face-ip-params
-nodes with the corresponding leaves. In the hicn model a variety of RPCs are provided
-to allow controller to communicate with the hicn-plugin as well as update the state
-data in hicn-state.
-
-To setup the startup configuration you can use the following script:
-```
-EXIT_CODE=0
-command -v sysrepocfg > /dev/null
-if [ $? != 0 ]; then
- echo "Could not find command \"sysrepocfg\"."
- exit ${EXIT_CODE}
-else
-sysrepocfg -d startup -i path_to_startup_xml -f xml hicn
-fi
-```
-
-startup.xml is placed in the yang-model. Here you can find the content:
-```
-<hicn-conf xmlns="urn:sysrepo:hicn">
-<params>
- <enable_disable>false</enable_disable>
- <pit_max_size>-1</pit_max_size>
- <cs_max_size>-1</cs_max_size>
- <cs_reserved_app>-1</cs_reserved_app>
- <pit_dflt_lifetime_sec>-1</pit_dflt_lifetime_sec>
- <pit_max_lifetime_sec>-1</pit_max_lifetime_sec>
- <pit_min_lifetime_sec>-1</pit_min_lifetime_sec>
-</params>
-</hicn-conf>
-```
-As can be seen, it contains the leaves of the params in hicn-conf node which is
-used as the startup configuration. This configuration can be changed through the
-controller by subscribing which changes the target to the running state. hicn
-yang model provides a list of RPCs which allows controller to communicate
-directly with the hicn-plugin. This RPCs may also cause the modification in
-state data.
-
-In order to run different RPCs from controller you can use the examples in the
-controler_rpcs_instances.xml in the yang-model. Here you can find the content:
-```
-<node-params-get xmlns="urn:sysrepo:hicn"/>
-
-<node-stat-get xmlns="urn:sysrepo:hicn"/>
-
-<strategy-get xmlns="urn:sysrepo:hicn">
- <strategy_id>0</strategy_id>
-</strategy-get>
-
-<strategies-get xmlns="urn:sysrepo:hicn"/>
-
-<route-get xmlns="urn:sysrepo:hicn">
- <prefix0>10</prefix0>
- <prefix1>20</prefix1>
- <len>30</len>
-</route-get>
-
-<route-del xmlns="urn:sysrepo:hicn">
- <prefix0>10</prefix0>
- <prefix1>20</prefix1>
- <len>30</len>
-</route-del>
-
-<route-nhops-add xmlns="urn:sysrepo:hicn">
- <prefix0>10</prefix0>
- <prefix1>20</prefix1>
- <len>30</len>
- <face_ids0>40</face_ids0>
- <face_ids1>50</face_ids1>
- <face_ids2>60</face_ids2>
- <face_ids3>70</face_ids3>
- <face_ids4>80</face_ids4>
- <face_ids5>90</face_ids5>
- <face_ids6>100</face_ids6>
- <n_faces>110</n_faces>
-</route-nhops-add>
-
-<route-nhops-del xmlns="urn:sysrepo:hicn">
- <prefix0>10</prefix0>
- <prefix1>20</prefix1>
- <len>30</len>
- <faceid>40</faceid>
-</route-nhops-del>
-
-<face-ip-params-get xmlns="urn:sysrepo:hicn">
- <faceid>10</faceid>
-</face-ip-params-get>
-
-<face-ip-add xmlns="urn:sysrepo:hicn">
- <nh_addr0>10</nh_addr0>
- <nh_addr1>20</nh_addr1>
- <swif>30</swif>
-</face-ip-add>
-
-<face-ip-del xmlns="urn:sysrepo:hicn">
- <faceid>0</faceid>
-</face-ip-del>
-
-<punting-add xmlns="urn:sysrepo:hicn">
- <prefix0>10</prefix0>
- <prefix1>20</prefix1>
- <len>30</len>
- <swif>40</swif>
-</punting-add>
-
-<punting-del xmlns="urn:sysrepo:hicn">
- <prefix0>10</prefix0>
- <prefix1>20</prefix1>
- <len>30</len>
- <swif>40</swif>
-</punting-del>
-```
-
-## Run the plugin
-
-Firstly, verify the plugin and binary libraries are located correctly, then run
-the vpp through (service vpp start). Next, run the sysrepo daemon (sysrepod),
-for debug mode: sysrepo -d -l 4 which runs with high verbosity. Then, run the
-sysrepo plugin (sysrepo-plugind), for debug mode: sysrep-plugind -d -l 4 which
-runs with high verbosity. Now, the hicn sysrepo plugin is loaded. Then, run the
-netopeer2-server which serves as NETCONF server.
-
-## Connect from netopeer2-cli
-
-In order to connect through the netopeer client run the netopeer2-cli. Then, follow these steps:
-
-- connect --host XXX --login XXX
-- get (you can get the configuration and operational data)
-- get-config (you can get the configuration data)
-- edit-config --target running --config
- you can modify the configuration but it needs an xml configuration input
-```
-<hicn-conf xmlns="urn:sysrepo:hicn">
-<params>
- <enable_disable>false</enable_disable>
- <pit_max_size>-1</pit_max_size>
- <cs_max_size>-1</cs_max_size>
- <cs_reserved_app>-1</cs_reserved_app>
- <pit_dflt_lifetime_sec>-1</pit_dflt_lifetime_sec>
- <pit_max_lifetime_sec>-1</pit_max_lifetime_sec>
- <pit_min_lifetime_sec>-1</pit_min_lifetime_sec>
-</params>
-</hicn-conf>
-```
-- user-rpc (you can call one of the rpc proposed by hicn model but it needs an xml input)
-
-## Connect from OpenDaylight (ODL) controller
-
-In order to connect through the OpenDaylight follow these procedure:
-
-- run karaf distribution (./opendayligh_installation_folder/bin/karaf)
-- install the required feature list in DOL (feature:install odl-netconf-server
- odl-netconf-connector odl-restconf-all odl-netconf-topology or
- odl-netconf-clustered-topology)
-- run a rest client program (e.g., postman or RESTClient)
-- mount the remote netopeer2-server to the OpenDaylight by the following REST API:
-
-PUT http://localhost:8181/restconf/config/network-topology:network-topology/topology/topology-netconf/node/hicn-node
-
-with the following body
-```
- <node xmlns="urn:TBD:params:xml:ns:yang:network-topology">
- <node-id>hicn-node</node-id>
- <host xmlns="urn:opendaylight:netconf-node-topology">Remote_NETCONF_SERVER_IP</host>
- <port xmlns="urn:opendaylight:netconf-node-topology">830</port>
- <username xmlns="urn:opendaylight:netconf-node-topology">username</username>
- <password xmlns="urn:opendaylight:netconf-node-topology">password</password>
- <tcp-only xmlns="urn:opendaylight:netconf-node-topology">false</tcp-only>
- <keepalive-delay xmlns="urn:opendaylight:netconf-node-topology">1</keepalive-delay>
- </node>
-```
-Note that the header files must be set to Content-Type: application/xml, Accept: application/xml.
-
-- send the operation through the following REST API:
-
-POST http://localhost:8181/restconf/operations/network-topology:network-topology/topology/topology-netconf/node/hicn-node/yang-ext:mount/ietf-netconf:edit-config
-
-The body can be used the same as edit-config in netopeer2-cli.
-
-## Connect from Network Services Orchestrator (NSO)
-
-To connect NSO to the netopeer2-server, first, you need to write a NED package
-for your device. The procedure to create NED for hicn is explained in the
-following:
-
-Place hicn.yang model in a folder called hicn-yang-model, and follow these steps:
-
-- ncs-make-package --netconf-ned ./hicn-yang-model ./hicn-nso
-- cd hicn-nso/src; make
-- ncs-setup --ned-package ./hicn-nso --dest ./hicn-nso-project
-- cd hicn-nso-project
-- ncs
-- ncs_cli -C -u admin
-- configure
-- devices authgroups group authhicn default-map remote-name user_name remote-password password
-- devices device hicn address IP_device port 830 authgroup authhicn device-type netconf
-- state admin-state unlocked
-- commit
-- ssh fetch-host-keys
-
-At this point, we are able to connect to the remote device.
-
-## Release note
-
-The current version is compatible with the 19.01 VPP stable and sysrepo 0.7.7. \ No newline at end of file