diff options
Diffstat (limited to 'docs/source/apps.md')
| -rw-r--r-- | docs/source/apps.md | 304 |
1 files changed, 304 insertions, 0 deletions
diff --git a/docs/source/apps.md b/docs/source/apps.md new file mode 100644 index 000000000..eefb68be1 --- /dev/null +++ b/docs/source/apps.md @@ -0,0 +1,304 @@ +# Application examples using hICN stack + +## Introduction + +higet and hicn-http-proxy are two application examples that use hicn stack. + +## Using hICN Application Examples + +### Dependencies + +Build dependencies: + +- c++14 ( clang++ / g++ ) +- CMake 3.5 or higher + +Basic dependencies: + +- OpenSSL +- pthreads +- libevent +- libparc +- libcurl +- libhicntransport + +## Executables + +### hicn-http-proxy + +`hicn-http-proxy` is a reverse proxy which can be used for augmenting the performance of a legacy HTTP/TCP server +by making use of hICN. It performs the following operations: + +- Receives a HTTP request from a hICN client +- Forwards it to a HTTP server over TCP +- Receives the response from the server and send it back to the client + +```bash +hicn-http-proxy [HTTP_PREFIX] [OPTIONS] + +HTTP_PREFIX: The prefix used for building the hicn names. + +Options: +-a <server_address> = origin server address +-p <server_port> = origin server port +-c <cache_size> = cache size of the proxy, in number of hicn data packets +-m <mtu> = mtu of hicn packets +-P <prefix> = optional most significant 16 bits of hicn prefix, in hexadecimal format + +Example: +./hicn-http-proxy http://webserver -a 127.0.0.1 -p 8080 -c 10000 -m 1200 -P b001 +``` + +The hICN names used by the hicn-http-proxy for naming the HTTP responses are composed in the following way, +starting from the most significant byte: + +- The first 2 bytes are the prefix specified in the -P option +- The next 6 bytes are the hash (Fowler–Noll–Vo non-crypto hash) of the locator (in the example `webserver`, without the `http://` part) +- The last 8 bytes are the hash (Fowler–Noll–Vo non-crypto hash) of the http request corresponding to the response being forwarded back to the client. + +### higet + +Higet is a non-interactive HTTP client working on top oh hICN. + +```bash +higet [option]... [url] +Options: +-O <output_path> = write documents to <output_file>. Use '-' for stdout. +-S = print server response. +-P = optional first 16 bits of hicn prefix, in hexadecimal format + +Example: +./higet -P b001 -O - http://webserver/index.html +``` + +The hICN names used by higet for naming the HTTP requests are composed the same way as described in [hicn-http-proxy](#hicn-http-proxy). + +### How To Setup A Simple HTTP Client-Server Scenario using the hicn-http-proxy + +We consider the following topology, consisting on two linux VM which are able to communicate through an IP network (you can also use containers or physical machines): + +```text +|client (10.0.0.1/24; 9001::1/64)|======|server (10.0.0.2/24; 9001::2/64)| +``` + +Install the hICN suite on two linux VM. This tutorial makes use of Ubuntu 18.04, but it could easily be adapted to other platforms. +You can either install the hICN stack using binaries or compile the code. In this tutorial we will make use of docker container and binaries packages. + +The client will use of the hicn-light forwarder, which is lightweight and tailored for devices such as android and laptops. +The server will use the hicn-plugin of vpp, which guarantees better performances and it is the best choice for server applications. + +Keep in mind that on the same system the stack based on vpp forwarder cannot coexist with the stack based on hicn light. + +For running the hicn-plugin at the server there are two main alternatives: + +- Use a docker container +- Run the hicn-plugin directly in a VM or Bare Metal Server + +#### Docker + +Install docker in the server VM: + +```bash +server$ sudo apt-get update +server$ sudo apt-get install \ + apt-transport-https \ + ca-certificates \ + curl \ + gnupg-agent \ + software-properties-common + +server$ curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo apt-key add - +server$ sudo add-apt-repository \ + "deb [arch=amd64] https://download.docker.com/linux/ubuntu \ + $(lsb_release -cs) \ + stable" +server$ sudo apt-get update +server$ sudo apt-get install docker-ce docker-ce-cli containerd.io +``` + +Run the hicn-http-proxy container. Here we use a public server [example.com](example.com) as origin: + +```bash +server$ docker run -e ORIGIN_ADDRESS=example.com \ + -e ORIGIN_PORT=80 \ + -e CACHE_SIZE=10000 \ + -e HICN_MTU=1200 \ + -e FIRST_IPV6_WORD=c001 \ + -e HICN_PREFIX=http://webserver \ + --privileged \ + --name vhttpproxy \ + -d icnteam/vhttpproxy +``` + +Create a hicn private network: + +```bash +server$ GATEWAY=192.168.0.254 +server$ docker network create --subnet 192.168.0.0/24 --gateway ${GATEWAY} hicn-network +``` + +Connect the proxy container to the hicn network: + +```bash +server$ docker network connect hicn-network vhttpproxy +``` + +Connect the hicn network to the vpp forwarder: + +```bash +server$ IP_ADDRESS=$(docker inspect -f "{{with index .NetworkSettings.Networks \"hicn-network\"}}{{.IPAddress}}{{end}}" vhttpproxy) +server$ INTERFACE=$(docker exec -it vhttpproxy ifconfig | grep -B 1 ${IP_ADDRESS} | awk 'NR==1 {gsub(":","",$1); print $1}') +server$ docker exec -it vhttpproxy ip addr flush dev ${INTERFACE} +server$ docker exec -it vhttpproxy ethtool -K ${INTERFACE} tx off rx off ufo off gso off gro off tso off +server$ docker exec -it vhttpproxy vppctl create host-interface name ${INTERFACE} +server$ docker exec -it vhttpproxy vppctl set interface state host-${INTERFACE} up +server$ docker exec -it vhttpproxy vppctl set interface ip address host-${INTERFACE} ${IP_ADDRESS}/24 +server$ docker exec -it vhttpproxy vppctl ip route add 10.0.0.0/24 via ${GATEWAY} host-eth1 +``` + +Set the punting: + +```bash +server$ PORT=12345 +server$ docker exec -it vhttpproxy vppctl hicn punting add prefix c001::/16 intfc host-${INTERFACE} type udp4 src_port ${PORT} dst_port ${PORT} +``` + +Docker containers are cool, but sometimes they do not allow you to do simple operations like expose ports while the container is already running. But we have a workaround for this :) + +```bash +server$ sudo iptables -t nat -A DOCKER -p udp --dport ${PORT} -j DNAT --to-destination ${IP_ADDRESS}:${PORT} +server$ sudo iptables -t nat -A POSTROUTING -j MASQUERADE -p udp --source ${IP_ADDRESS} --destination ${IP_ADDRESS} --dport ${PORT} +server$ sudo iptables -A DOCKER -j ACCEPT -p udp --destination ${IP_ADDRESS} --dport ${PORT} +``` + +In the client, install the hicn stack: + +```bash +client$ sudo apt-get install -y hicn-light hicn-apps +``` + +Create a configuration file for the hicn-light forwarder. Here we are configuring UDP faces: + +```bash +client$ mkdir -p ${HOME}/etc +client$ LOCAL_IP="10.0.0.2" # Put here the actual IPv4 of the local interface +client$ LOCAL_PORT="12345" +client$ REMOTE_IP="10.0.0.1" # Put here the actual IPv4 of the remote interface +client$ REMOTE_PORT="12345" +client$ cat << EOF > ${HOME}/etc/hicn-light.conf +add listener udp list0 ${LOCAL_IP} ${LOCAL_PORT} +add connection udp conn0 ${REMOTE_IP} ${REMOTE_PORT} ${LOCAL_IP} ${LOCAL_PORT} +add route conn0 c001::/16 1 +EOF +``` + +Run the hicn-light forwarder + +```bash +client$ sudo /usr/bin/hicn-light-daemon --daemon --capacity 1000 --log-file ${HOME}/hicn-light.log --config ${HOME}/etc/hicn-light.conf +``` + +Run the http client [higet](#higet) and print the http response on stdout: + +```bash +client$ /usr/bin/higet -O - http://webserver/index.html -P c001 +``` + +#### Host/VM + +You can install the hicn-plugin of vpp on your VM and directly use DPDK compatible nics, forwarding hicn packets directly over the network. DPDK compatible nics can be used inside a container as well. + +```bash +server$ sudo apt-get install -y hicn-plugin vpp-plugin-dpdk hicn-apps-memif +``` + +It will install all the required deps (vpp, hicn apps and libraries compiled for communicating with vpp using shared memories). Configure VPP following the steps described [here](https://github.com/FDio/hicn/blob/master/hicn-plugin/README.md#configure-vpp). + +This tutorial assumes you configured two interfaces in your server VM: + +- One interface which uses the DPDK driver, to be used by VPP +- One interface which is still owned by the kernel + +The DPDK interface will be used for connecting the server with the hicn client, while the other interface will guarantee connectivity to the applications running in the VM, including the hicn-http-proxy. If you run the commands: + +```bash +server$ sudo systemctl restart vpp +server$ vppctl show int +``` + +The output must show the dpdk interface owned by VPP: + +```text + Name Idx State MTU (L3/IP4/IP6/MPLS) Counter Count +GigabitEthernetb/0/0 1 down 9000/0/0/0 +local0 0 down 0/0/0/0 +``` + +If the interface is down, bring it up and assign the correct ip address to it: + +```bash +server$ vppctl set int state GigabitEthernetb/0/0 up +server$ vppctl set interface ip address GigabitEthernetb/0/0 9001::1/64 +``` + +Take care of replacing the interface name (`GigabitEthernetb/0/0`) with the actual name of your interface. + +Now enable the hicn plugin and set the punting for the hicn packets: + +```bash +server$ vppctl hicn control start +server$ vppctl hicn punting add prefix c001::/16 intfc GigabitEthernetb/0/0 type ip +``` + +Run the hicn-http-proxy app: + +```bash +server$ sudo /usr/bin/hicn-http-proxy -a example.com -p 80 -c 10000 -m 1200 -P c001 http://webserver +``` + +Configure the client for sending hicn packets without any udp encapsulation: + +```bash +client$ mkdir -p ${HOME}/etc +client$ LOCAL_IP="9001::2" +client$ REMOTE_IP="9001::1" +client$ cat << EOF > ${HOME}/etc/hicn-light.conf +add listener hicn lst 0::0 +add punting lst c001::/16 +add listener hicn list0 ${LOCAL_IP} +add connection hicn conn0 ${REMOTE_IP} ${LOCAL_IP} +add route conn0 c001::/16 1 +EOF +``` + +Restart the forwarder: + +```bash +client$ sudo killall -INT hicn-light-daemon +client$ sudo /usr/bin/hicn-light-daemon --daemon --capacity 1000 --log-file ${HOME}/hicn-light.log --config ${HOME}/etc/hicn-light.conf +``` + +Retrieve a web page: + +```bash +client$ /usr/bin/higet -O - http://webserver/index.html -P c001 +``` + +## License + +This software is distributed under the following license: + +```text +Copyright (c) 2017-2019 Cisco and/or its affiliates. +Licensed under the Apache License, Version 2.0 (the "License"); +you may not use this file except in compliance with the License. +You may obtain a copy of the License at: + + http://www.apache.org/licenses/LICENSE-2.0 + +Unless required by applicable law or agreed to in writing, software +distributed under the License is distributed on an "AS IS" BASIS, +WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +See the License for the specific language governing permissions and +limitations under the License. +``` |