diff options
Diffstat (limited to 'hicn-plugin/src/host_stack/testbed')
| -rw-r--r-- | hicn-plugin/src/host_stack/testbed/Dockerfile | 46 | ||||
| -rw-r--r-- | hicn-plugin/src/host_stack/testbed/client-startup.txt | 6 | ||||
| -rw-r--r-- | hicn-plugin/src/host_stack/testbed/init.sh | 6 | ||||
| -rw-r--r-- | hicn-plugin/src/host_stack/testbed/run-client-server.sh | 24 | ||||
| -rw-r--r-- | hicn-plugin/src/host_stack/testbed/server-startup.txt | 7 | ||||
| -rw-r--r-- | hicn-plugin/src/host_stack/testbed/startup-client.conf | 188 | ||||
| -rw-r--r-- | hicn-plugin/src/host_stack/testbed/startup-server.conf | 189 | ||||
| -rw-r--r-- | hicn-plugin/src/host_stack/testbed/test_hicn_hs.txt | 6 | ||||
| -rw-r--r-- | hicn-plugin/src/host_stack/testbed/vcl.conf | 7 |
9 files changed, 0 insertions, 479 deletions
diff --git a/hicn-plugin/src/host_stack/testbed/Dockerfile b/hicn-plugin/src/host_stack/testbed/Dockerfile deleted file mode 100644 index 4e7005938..000000000 --- a/hicn-plugin/src/host_stack/testbed/Dockerfile +++ /dev/null @@ -1,46 +0,0 @@ -FROM ubuntu:18.04 - -ARG USERNAME=ubuntu -ARG USER_UID=1000 -ARG USER_GID=$USER_UID - -ARG VPP_GRP=vpp -ARG VPP_GID=998 - -ARG WORKDIR=/home/ubuntu - -RUN apt-get update \ - && apt-get -y install --no-install-recommends apt-utils sudo dialog build-essential \ - cmake cppcheck valgrind curl autoconf automake ccache debhelper dkms git libtool \ - libapr1-dev dh-systemd libconfuse-dev git-review exuberant-ctags cscope pkg-config \ - lcov chrpath autoconf indent clang-format libnuma-dev python-all python3-all \ - python3-setuptools python-dev python-virtualenv python-pip libffi6 check \ - libboost-all-dev libffi-dev python3-ply libmbedtls-dev cmake ninja-build uuid-dev \ - python3-jsonschema gdb libssl-dev python-setuptools zsh 2>&1 \ - # - # Verify git, process tools, lsb-release (useful for CLI installs) installed - && apt-get -y install git procps lsb-release curl iproute2 \ - # - # Create a non-root user to use if preferred - see https://aka.ms/vscode-remote/containers/non-root-user. - && groupadd --gid $USER_GID $USERNAME \ - && useradd -s /bin/bash --uid $USER_UID --gid $USER_GID -m $USERNAME \ - # [Optional] Uncomment the next three lines to add sudo support - && apt-get install -y sudo \ - && echo $USERNAME ALL=\(root\) NOPASSWD:ALL > /etc/sudoers.d/$USERNAME \ - && chmod 0440 /etc/sudoers.d/$USERNAME \ - # Create vpp group - && groupadd --gid $VPP_GID $VPP_GRP \ - # - && mkdir -p $WORKDIR \ - # - # Clean up - && apt-get autoremove -y \ - && apt-get clean -y \ - && rm -rf /var/lib/apt/lists/* - -USER $USERNAME -COPY init.sh /init.sh - -WORKDIR $WORKDIR - -CMD ["bash", "/init.sh"] diff --git a/hicn-plugin/src/host_stack/testbed/client-startup.txt b/hicn-plugin/src/host_stack/testbed/client-startup.txt deleted file mode 100644 index 7165265b3..000000000 --- a/hicn-plugin/src/host_stack/testbed/client-startup.txt +++ /dev/null @@ -1,6 +0,0 @@ -create interface memif id 0 master -set int state memif0/0 up -set int ip addr memif0/0 192.168.10.1/24 -set int ip addr memif0/0 2001::1/64 -ip route add b001::/64 via 2001::2 memif0/0 -#hicn enable b001::/64
\ No newline at end of file diff --git a/hicn-plugin/src/host_stack/testbed/init.sh b/hicn-plugin/src/host_stack/testbed/init.sh deleted file mode 100644 index 3017c2fea..000000000 --- a/hicn-plugin/src/host_stack/testbed/init.sh +++ /dev/null @@ -1,6 +0,0 @@ -#!/bin/bash - -sudo modprobe uio_pci_generic -sudo cp /home/ubuntu/host-stack/install/lib/libhicn.so /usr/lib/libhicn.so - -tail -f /dev/null
\ No newline at end of file diff --git a/hicn-plugin/src/host_stack/testbed/run-client-server.sh b/hicn-plugin/src/host_stack/testbed/run-client-server.sh deleted file mode 100644 index 53388cdda..000000000 --- a/hicn-plugin/src/host_stack/testbed/run-client-server.sh +++ /dev/null @@ -1,24 +0,0 @@ -#!/bin/bash - -docker run -d \ - --privileged \ - --cap-add=ALL \ - --security-opt seccomp=unconfined \ - --hostname=vpp-client \ - -e STARTUP_CONF=/home/ubuntu/host-stack/vpp/testbed/startup-client.conf \ - -v /home/ubuntu/host-stack:/home/ubuntu/host-stack \ - -v /dev:/dev -v /lib/modules:/lib/modules \ - -v /var/run/vpp:/var/run/vpp \ - --name vpp-client vpp-develop - -docker run -d \ - --privileged \ - --cap-add=SYS_PTRACE \ - --security-opt seccomp=unconfined \ - --hostname=vpp-server \ - -e STARTUP_CONF=/home/ubuntu/host-stack/vpp/testbed/startup-server.conf \ - --cap-add=NET_ADMIN \ - -v /home/ubuntu/host-stack:/home/ubuntu/host-stack \ - -v /dev:/dev -v /lib/modules:/lib/modules \ - -v /var/run/vpp:/var/run/vpp \ - --name vpp-server vpp-develop
\ No newline at end of file diff --git a/hicn-plugin/src/host_stack/testbed/server-startup.txt b/hicn-plugin/src/host_stack/testbed/server-startup.txt deleted file mode 100644 index 1b4d54338..000000000 --- a/hicn-plugin/src/host_stack/testbed/server-startup.txt +++ /dev/null @@ -1,7 +0,0 @@ -create interface memif id 0 slave -set int state memif0/0 up -set int ip addr memif0/0 192.168.10.2/24 -set int ip addr memif0/0 2001::2/64 -hicn hs set local prefix b001::/16 -#test hicn hs server uri hicn://b001::/64 -#hicn enable b001::/64 diff --git a/hicn-plugin/src/host_stack/testbed/startup-client.conf b/hicn-plugin/src/host_stack/testbed/startup-client.conf deleted file mode 100644 index fb0c89c87..000000000 --- a/hicn-plugin/src/host_stack/testbed/startup-client.conf +++ /dev/null @@ -1,188 +0,0 @@ - -unix { - nodaemon - interactive - log /var/log/vpp/vpp.log - full-coredump - cli-listen /run/vpp/cli.sock - gid vpp - startup-config /home/ubuntu/host-stack/vpp/testbed/client-startup.txt -} - -api-trace { -## This stanza controls binary API tracing. Unless there is a very strong reason, -## please leave this feature enabled. - on -## Additional parameters: -## -## To set the number of binary API trace records in the circular buffer, configure nitems -## -## nitems <nnn> -## -## To save the api message table decode tables, configure a filename. Results in /tmp/<filename> -## Very handy for understanding api message changes between versions, identifying missing -## plugins, and so forth. -## -## save-api-table <filename> -} - -api-segment { - gid vpp -} - -socksvr { - default -} - -cpu { - ## In the VPP there is one main thread and optionally the user can create worker(s) - ## The main thread and worker thread(s) can be pinned to CPU core(s) manually or automatically - - ## Manual pinning of thread(s) to CPU core(s) - - ## Set logical CPU core where main thread runs, if main core is not set - ## VPP will use core 1 if available - main-core 1 - - ## Set logical CPU core(s) where worker threads are running - # corelist-workers 2-3,18-19 - - ## Automatic pinning of thread(s) to CPU core(s) - - ## Sets number of CPU core(s) to be skipped (1 ... N-1) - ## Skipped CPU core(s) are not used for pinning main thread and working thread(s). - ## The main thread is automatically pinned to the first available CPU core and worker(s) - ## are pinned to next free CPU core(s) after core assigned to main thread - # skip-cores 4 - - ## Specify a number of workers to be created - ## Workers are pinned to N consecutive CPU cores while skipping "skip-cores" CPU core(s) - ## and main thread's CPU core - # workers 2 - - ## Set scheduling policy and priority of main and worker threads - - ## Scheduling policy options are: other (SCHED_OTHER), batch (SCHED_BATCH) - ## idle (SCHED_IDLE), fifo (SCHED_FIFO), rr (SCHED_RR) - # scheduler-policy fifo - - ## Scheduling priority is used only for "real-time policies (fifo and rr), - ## and has to be in the range of priorities supported for a particular policy - # scheduler-priority 50 -} - -buffers { - ## Increase number of buffers allocated, needed only in scenarios with - ## large number of interfaces and worker threads. Value is per numa node. -# Default is 16384 (8192 if running unpriviledged) - buffers-per-numa 600000 - ## Size of buffer data area - ## Default is 2048 - # default data-size 2048 -} - -# dpdk { - ## Change default settings for all interfaces - # dev default { - ## Number of receive queues, enables RSS - ## Default is 1 - # num-rx-queues 3 - - ## Number of transmit queues, Default is equal - ## to number of worker threads or 1 if no workers treads - # num-tx-queues 3 - - ## Number of descriptors in transmit and receive rings - ## increasing or reducing number can impact performance - ## Default is 1024 for both rx and tx - # num-rx-desc 512 - # num-tx-desc 512 - - ## VLAN strip offload mode for interface - ## Default is off - # vlan-strip-offload on - - ## TCP Segment Offload - ## Default is off - ## To enable TSO, 'enable-tcp-udp-checksum' must be set - # tso on - - ## Devargs - ## device specific init args - ## Default is NULL - # devargs safe-mode-support=1,pipeline-mode-support=1 - # } - - ## Whitelist specific interface by specifying PCI address - # dev 0000:13:00.0 - - ## Blacklist specific device type by specifying PCI vendor:device - ## Whitelist entries take precedence - # blacklist 8086:10fb - - ## Set interface name - # dev 0000:02:00.1 { - # name eth0 - # } - - ## Whitelist specific interface by specifying PCI address and in - ## addition specify custom parameters for this interface - # dev 0000:02:00.1 { - # num-rx-queues 2 - # } - - ## Change UIO driver used by VPP, Options are: igb_uio, vfio-pci, - ## uio_pci_generic or auto (default) - # uio-driver vfio-pci - - ## Disable multi-segment buffers, improves performance but - ## disables Jumbo MTU support - # no-multi-seg - - ## Change hugepages allocation per-socket, needed only if there is need for - ## larger number of mbufs. Default is 256M on each detected CPU socket - # socket-mem 2048,2048 - - ## Disables UDP / TCP TX checksum offload. Typically needed for use - ## faster vector PMDs (together with no-multi-seg) - # no-tx-checksum-offload - - ## Enable UDP / TCP TX checksum offload - ## This is the reversed option of 'no-tx-checksum-offload' - # enable-tcp-udp-checksum -# } - - -plugins { - ## Adjusting the plugin path depending on where the VPP plugins are - path /home/ubuntu/host-stack/vpp/build-root/install-vpp_debug-native/vpp/lib/x86_64-linux-gnu/vpp_plugins:/home/ubuntu/host-stack/vpp/build-root/install-vpp_debug-native/vpp/lib/vpp_plugins:/home/ubuntu/host-stack/install/lib/vpp_plugins - ## Disable all plugins by default and then selectively enable specific plugins - plugin default { enable } - plugin dpdk_plugin.so { disable } - plugin hicn_plugin.so { enable } -# plugin hicn_plugin.so { enable } - - - ## Enable all plugins by default and then selectively disable specific plugins - # plugin dpdk_plugin.so { disable } - # plugin acl_plugin.so { disable } -} - -## Statistics Segment -# statseg { - # socket-name <filename>, name of the stats segment socket - # defaults to /run/vpp/stats.sock - # size <nnn>[KMG], size of the stats segment, defaults to 32mb - # per-node-counters on | off, defaults to none - # update-interval <f64-seconds>, sets the segment scrape / update interval -# } - -#hicn { -# pit-size 2000000 -# cs-size 1000000 -# cs-reserved-app 10 -#} - -session { evt_qs_memfd_seg } -socksvr { socket-name /tmp/vpp-api.sock} -tcp {cc-algo cubic} diff --git a/hicn-plugin/src/host_stack/testbed/startup-server.conf b/hicn-plugin/src/host_stack/testbed/startup-server.conf deleted file mode 100644 index 46fc220d8..000000000 --- a/hicn-plugin/src/host_stack/testbed/startup-server.conf +++ /dev/null @@ -1,189 +0,0 @@ - -unix { - nodaemon - interactive - log /var/log/vpp/vpp.log - full-coredump - cli-listen /run/vpp/cli.sock - gid vpp - startup-config /home/ubuntu/host-stack/vpp/testbed/server-startup.txt -} - -api-trace { -## This stanza controls binary API tracing. Unless there is a very strong reason, -## please leave this feature enabled. - on -## Additional parameters: -## -## To set the number of binary API trace records in the circular buffer, configure nitems -## -## nitems <nnn> -## -## To save the api message table decode tables, configure a filename. Results in /tmp/<filename> -## Very handy for understanding api message changes between versions, identifying missing -## plugins, and so forth. -## -## save-api-table <filename> -} - -api-segment { - gid vpp -} - -socksvr { - default -} - -cpu { - ## In the VPP there is one main thread and optionally the user can create worker(s) - ## The main thread and worker thread(s) can be pinned to CPU core(s) manually or automatically - - ## Manual pinning of thread(s) to CPU core(s) - - ## Set logical CPU core where main thread runs, if main core is not set - ## VPP will use core 1 if available - main-core 2 - - ## Set logical CPU core(s) where worker threads are running - # corelist-workers 2-3,18-19 - - ## Automatic pinning of thread(s) to CPU core(s) - - ## Sets number of CPU core(s) to be skipped (1 ... N-1) - ## Skipped CPU core(s) are not used for pinning main thread and working thread(s). - ## The main thread is automatically pinned to the first available CPU core and worker(s) - ## are pinned to next free CPU core(s) after core assigned to main thread - # skip-cores 4 - - ## Specify a number of workers to be created - ## Workers are pinned to N consecutive CPU cores while skipping "skip-cores" CPU core(s) - ## and main thread's CPU core - # workers 2 - - ## Set scheduling policy and priority of main and worker threads - - ## Scheduling policy options are: other (SCHED_OTHER), batch (SCHED_BATCH) - ## idle (SCHED_IDLE), fifo (SCHED_FIFO), rr (SCHED_RR) - # scheduler-policy fifo - - ## Scheduling priority is used only for "real-time policies (fifo and rr), - ## and has to be in the range of priorities supported for a particular policy - # scheduler-priority 50 -} - -buffers { - ## Increase number of buffers allocated, needed only in scenarios with - ## large number of interfaces and worker threads. Value is per numa node. -# Default is 16384 (8192 if running unpriviledged) - buffers-per-numa 600000 - ## Size of buffer data area - ## Default is 2048 - # default data-size 2048 -} - -# dpdk { - ## Change default settings for all interfaces - # dev default { - ## Number of receive queues, enables RSS - ## Default is 1 - # num-rx-queues 3 - - ## Number of transmit queues, Default is equal - ## to number of worker threads or 1 if no workers treads - # num-tx-queues 3 - - ## Number of descriptors in transmit and receive rings - ## increasing or reducing number can impact performance - ## Default is 1024 for both rx and tx - # num-rx-desc 512 - # num-tx-desc 512 - - ## VLAN strip offload mode for interface - ## Default is off - # vlan-strip-offload on - - ## TCP Segment Offload - ## Default is off - ## To enable TSO, 'enable-tcp-udp-checksum' must be set - # tso on - - ## Devargs - ## device specific init args - ## Default is NULL - # devargs safe-mode-support=1,pipeline-mode-support=1 - # } - - ## Whitelist specific interface by specifying PCI address - # dev 0000:13:00.1 - - ## Blacklist specific device type by specifying PCI vendor:device - ## Whitelist entries take precedence - # blacklist 8086:10fb - - ## Set interface name - # dev 0000:02:00.1 { - # name eth0 - # } - - ## Whitelist specific interface by specifying PCI address and in - ## addition specify custom parameters for this interface - # dev 0000:02:00.1 { - # num-rx-queues 2 - # } - - ## Change UIO driver used by VPP, Options are: igb_uio, vfio-pci, - ## uio_pci_generic or auto (default) - # uio-driver vfio-pci - - ## Disable multi-segment buffers, improves performance but - ## disables Jumbo MTU support - # no-multi-seg - - ## Change hugepages allocation per-socket, needed only if there is need for - ## larger number of mbufs. Default is 256M on each detected CPU socket - # socket-mem 2048,2048 - - ## Disables UDP / TCP TX checksum offload. Typically needed for use - ## faster vector PMDs (together with no-multi-seg) - # no-tx-checksum-offload - - ## Enable UDP / TCP TX checksum offload - ## This is the reversed option of 'no-tx-checksum-offload' - # enable-tcp-udp-checksum -# } - - -plugins { - ## Adjusting the plugin path depending on where the VPP plugins are - path /home/ubuntu/host-stack/vpp/build-root/install-vpp_debug-native/vpp/lib/x86_64-linux-gnu/vpp_plugins:/home/ubuntu/host-stack/vpp/build-root/install-vpp_debug-native/vpp/lib/vpp_plugins:/home/ubuntu/host-stack/install/lib/vpp_plugins - ## Disable all plugins by default and then selectively enable specific plugins - plugin default { enable } - plugin dpdk_plugin.so { disable } - plugin hicn_plugin.so { enable } -# plugin memif_plugin.so { enable } -# plugin hicn_plugin.so { enable } - - - ## Enable all plugins by default and then selectively disable specific plugins - # plugin dpdk_plugin.so { disable } - # plugin acl_plugin.so { disable } -} - -## Statistics Segment -# statseg { - # socket-name <filename>, name of the stats segment socket - # defaults to /run/vpp/stats.sock - # size <nnn>[KMG], size of the stats segment, defaults to 32mb - # per-node-counters on | off, defaults to none - # update-interval <f64-seconds>, sets the segment scrape / update interval -# } - -#hicn { -# pit-size 2000000 -# cs-size 1000000 -# cs-reserved-app 10 -#} - -session { evt_qs_memfd_seg } -socksvr { socket-name /tmp/vpp-api.sock} -tcp {cc-algo cubic} diff --git a/hicn-plugin/src/host_stack/testbed/test_hicn_hs.txt b/hicn-plugin/src/host_stack/testbed/test_hicn_hs.txt deleted file mode 100644 index 73a5b15f5..000000000 --- a/hicn-plugin/src/host_stack/testbed/test_hicn_hs.txt +++ /dev/null @@ -1,6 +0,0 @@ -hicn hs set local prefix b001::/8 -test hicn hs server uri hicn://b001::/64 -test hicn hs client uri hicn://b001::1/64 - - -b hicn_hs.c:772 if ctx->snd_nxt == 46604
\ No newline at end of file diff --git a/hicn-plugin/src/host_stack/testbed/vcl.conf b/hicn-plugin/src/host_stack/testbed/vcl.conf deleted file mode 100644 index 694a3e3a1..000000000 --- a/hicn-plugin/src/host_stack/testbed/vcl.conf +++ /dev/null @@ -1,7 +0,0 @@ -vcl { - rx-fifo-size 4000000 - tx-fifo-size 4000000 - app-scope-local - app-scope-global - api-socket-name /tmp/vpp-api.sock -}
\ No newline at end of file |