summaryrefslogtreecommitdiffstats
path: root/utils/sysrepo-plugins/yang/ietf
diff options
context:
space:
mode:
Diffstat (limited to 'utils/sysrepo-plugins/yang/ietf')
-rw-r--r--utils/sysrepo-plugins/yang/ietf/iana-if-type@2014-05-08.yang1704
-rw-r--r--utils/sysrepo-plugins/yang/ietf/ietf-interfaces.yang1123
-rw-r--r--utils/sysrepo-plugins/yang/ietf/ietf-ip@2014-06-16.yang742
-rw-r--r--utils/sysrepo-plugins/yang/ietf/ietf-yang-types@2013-07-15.yang474
4 files changed, 0 insertions, 4043 deletions
diff --git a/utils/sysrepo-plugins/yang/ietf/iana-if-type@2014-05-08.yang b/utils/sysrepo-plugins/yang/ietf/iana-if-type@2014-05-08.yang
deleted file mode 100644
index 4138ba46e..000000000
--- a/utils/sysrepo-plugins/yang/ietf/iana-if-type@2014-05-08.yang
+++ /dev/null
@@ -1,1704 +0,0 @@
-module iana-if-type {
-
- yang-version 1;
-
- namespace
- "urn:ietf:params:xml:ns:yang:iana-if-type";
-
- prefix ianaift;
-
- import ietf-interfaces {
- prefix if;
- }
-
- organization "IANA";
-
- contact
- " Internet Assigned Numbers Authority
-
- Postal: ICANN
- 4676 Admiralty Way, Suite 330
- Marina del Rey, CA 90292
-
- Tel: +1 310 823 9358
- <mailto:iana@iana.org>";
-
- description
- "This YANG module defines YANG identities for IANA-registered
- interface types.
-
- This YANG module is maintained by IANA and reflects the
- 'ifType definitions' registry.
-
- The latest revision of this YANG module can be obtained from
- the IANA web site.
-
- Requests for new values should be made to IANA via
- email (iana@iana.org).
-
- Copyright (c) 2014 IETF Trust and the persons identified as
- authors of the code. All rights reserved.
-
- Redistribution and use in source and binary forms, with or
- without modification, is permitted pursuant to, and subject
- to the license terms contained in, the Simplified BSD License
- set forth in Section 4.c of the IETF Trust's Legal Provisions
- Relating to IETF Documents
- (http://trustee.ietf.org/license-info).
-
- The initial version of this YANG module is part of RFC 7224;
- see the RFC itself for full legal notices.";
-
- reference
- "IANA 'ifType definitions' registry.
- <http://www.iana.org/assignments/smi-numbers>";
-
-
- revision "2014-05-08" {
- description "Initial revision.";
- reference
- "RFC 7224: IANA Interface Type YANG Module";
-
- }
-
-
- identity iana-interface-type {
- base if:interface-type;
- description
- "This identity is used as a base for all interface types
- defined in the 'ifType definitions' registry.";
- }
-
- identity other {
- base iana-interface-type;
- }
-
- identity regular1822 {
- base iana-interface-type;
- }
-
- identity hdh1822 {
- base iana-interface-type;
- }
-
- identity ddnX25 {
- base iana-interface-type;
- }
-
- identity rfc877x25 {
- base iana-interface-type;
- reference
- "RFC 1382 - SNMP MIB Extension for the X.25 Packet Layer";
-
- }
-
- identity ethernetCsmacd {
- base iana-interface-type;
- description
- "For all Ethernet-like interfaces, regardless of speed,
- as per RFC 3635.";
- reference
- "RFC 3635 - Definitions of Managed Objects for the
- Ethernet-like Interface Types";
-
- }
-
- identity iso88023Csmacd {
- base iana-interface-type;
- status deprecated;
- description
- "Deprecated via RFC 3635.
- Use ethernetCsmacd(6) instead.";
- reference
- "RFC 3635 - Definitions of Managed Objects for the
- Ethernet-like Interface Types";
-
- }
-
- identity iso88024TokenBus {
- base iana-interface-type;
- }
-
- identity iso88025TokenRing {
- base iana-interface-type;
- }
-
- identity iso88026Man {
- base iana-interface-type;
- }
-
- identity starLan {
- base iana-interface-type;
- status deprecated;
- description
- "Deprecated via RFC 3635.
- Use ethernetCsmacd(6) instead.";
- reference
- "RFC 3635 - Definitions of Managed Objects for the
- Ethernet-like Interface Types";
-
- }
-
- identity proteon10Mbit {
- base iana-interface-type;
- }
-
- identity proteon80Mbit {
- base iana-interface-type;
- }
-
- identity hyperchannel {
- base iana-interface-type;
- }
-
- identity fddi {
- base iana-interface-type;
- reference
- "RFC 1512 - FDDI Management Information Base";
-
- }
-
- identity lapb {
- base iana-interface-type;
- reference
- "RFC 1381 - SNMP MIB Extension for X.25 LAPB";
-
- }
-
- identity sdlc {
- base iana-interface-type;
- }
-
- identity ds1 {
- base iana-interface-type;
- description "DS1-MIB.";
- reference
- "RFC 4805 - Definitions of Managed Objects for the
- DS1, J1, E1, DS2, and E2 Interface Types";
-
- }
-
- identity e1 {
- base iana-interface-type;
- status obsolete;
- description "Obsolete; see DS1-MIB.";
- reference
- "RFC 4805 - Definitions of Managed Objects for the
- DS1, J1, E1, DS2, and E2 Interface Types";
-
- }
-
- identity basicISDN {
- base iana-interface-type;
- description
- "No longer used. See also RFC 2127.";
- }
-
- identity primaryISDN {
- base iana-interface-type;
- description
- "No longer used. See also RFC 2127.";
- }
-
- identity propPointToPointSerial {
- base iana-interface-type;
- description "Proprietary serial.";
- }
-
- identity ppp {
- base iana-interface-type;
- }
-
- identity softwareLoopback {
- base iana-interface-type;
- }
-
- identity eon {
- base iana-interface-type;
- description "CLNP over IP.";
- }
-
- identity ethernet3Mbit {
- base iana-interface-type;
- }
-
- identity nsip {
- base iana-interface-type;
- description "XNS over IP.";
- }
-
- identity slip {
- base iana-interface-type;
- description "Generic SLIP.";
- }
-
- identity ultra {
- base iana-interface-type;
- description "Ultra Technologies.";
- }
-
- identity ds3 {
- base iana-interface-type;
- description "DS3-MIB.";
- reference
- "RFC 3896 - Definitions of Managed Objects for the
- DS3/E3 Interface Type";
-
- }
-
- identity sip {
- base iana-interface-type;
- description "SMDS, coffee.";
- reference
- "RFC 1694 - Definitions of Managed Objects for SMDS
- Interfaces using SMIv2";
-
- }
-
- identity frameRelay {
- base iana-interface-type;
- description "DTE only.";
- reference
- "RFC 2115 - Management Information Base for Frame Relay
- DTEs Using SMIv2";
-
- }
-
- identity rs232 {
- base iana-interface-type;
- reference
- "RFC 1659 - Definitions of Managed Objects for RS-232-like
- Hardware Devices using SMIv2";
-
- }
-
- identity para {
- base iana-interface-type;
- description "Parallel-port.";
- reference
- "RFC 1660 - Definitions of Managed Objects for
- Parallel-printer-like Hardware Devices using
- SMIv2";
-
- }
-
- identity arcnet {
- base iana-interface-type;
- description "ARCnet.";
- }
-
- identity arcnetPlus {
- base iana-interface-type;
- description "ARCnet Plus.";
- }
-
- identity atm {
- base iana-interface-type;
- description "ATM cells.";
- }
-
- identity miox25 {
- base iana-interface-type;
- reference
- "RFC 1461 - SNMP MIB extension for Multiprotocol
- Interconnect over X.25";
-
- }
-
- identity sonet {
- base iana-interface-type;
- description "SONET or SDH.";
- }
-
- identity x25ple {
- base iana-interface-type;
- reference
- "RFC 2127 - ISDN Management Information Base using SMIv2";
-
- }
-
- identity iso88022llc {
- base iana-interface-type;
- }
-
- identity localTalk {
- base iana-interface-type;
- }
-
- identity smdsDxi {
- base iana-interface-type;
- }
-
- identity frameRelayService {
- base iana-interface-type;
- description "FRNETSERV-MIB.";
- reference
- "RFC 2954 - Definitions of Managed Objects for Frame
- Relay Service";
-
- }
-
- identity v35 {
- base iana-interface-type;
- }
-
- identity hssi {
- base iana-interface-type;
- }
-
- identity hippi {
- base iana-interface-type;
- }
-
- identity modem {
- base iana-interface-type;
- description "Generic modem.";
- }
-
- identity aal5 {
- base iana-interface-type;
- description "AAL5 over ATM.";
- }
-
- identity sonetPath {
- base iana-interface-type;
- }
-
- identity sonetVT {
- base iana-interface-type;
- }
-
- identity smdsIcip {
- base iana-interface-type;
- description
- "SMDS InterCarrier Interface.";
- }
-
- identity propVirtual {
- base iana-interface-type;
- description
- "Proprietary virtual/internal.";
- reference
- "RFC 2863 - The Interfaces Group MIB";
-
- }
-
- identity propMultiplexor {
- base iana-interface-type;
- description
- "Proprietary multiplexing.";
- reference
- "RFC 2863 - The Interfaces Group MIB";
-
- }
-
- identity ieee80212 {
- base iana-interface-type;
- description "100BaseVG.";
- }
-
- identity fibreChannel {
- base iana-interface-type;
- description "Fibre Channel.";
- }
-
- identity hippiInterface {
- base iana-interface-type;
- description "HIPPI interfaces.";
- }
-
- identity frameRelayInterconnect {
- base iana-interface-type;
- status obsolete;
- description
- "Obsolete; use either
- frameRelay(32) or frameRelayService(44).";
- }
-
- identity aflane8023 {
- base iana-interface-type;
- description
- "ATM Emulated LAN for 802.3.";
- }
-
- identity aflane8025 {
- base iana-interface-type;
- description
- "ATM Emulated LAN for 802.5.";
- }
-
- identity cctEmul {
- base iana-interface-type;
- description "ATM Emulated circuit.";
- }
-
- identity fastEther {
- base iana-interface-type;
- status deprecated;
- description
- "Obsoleted via RFC 3635.
- ethernetCsmacd(6) should be used instead.";
- reference
- "RFC 3635 - Definitions of Managed Objects for the
- Ethernet-like Interface Types";
-
- }
-
- identity isdn {
- base iana-interface-type;
- description "ISDN and X.25.";
- reference
- "RFC 1356 - Multiprotocol Interconnect on X.25 and ISDN
- in the Packet Mode";
-
- }
-
- identity v11 {
- base iana-interface-type;
- description "CCITT V.11/X.21.";
- }
-
- identity v36 {
- base iana-interface-type;
- description "CCITT V.36.";
- }
-
- identity g703at64k {
- base iana-interface-type;
- description "CCITT G703 at 64Kbps.";
- }
-
- identity g703at2mb {
- base iana-interface-type;
- status obsolete;
- description "Obsolete; see DS1-MIB.";
- }
-
- identity qllc {
- base iana-interface-type;
- description "SNA QLLC.";
- }
-
- identity fastEtherFX {
- base iana-interface-type;
- status deprecated;
- description
- "Obsoleted via RFC 3635.
- ethernetCsmacd(6) should be used instead.";
- reference
- "RFC 3635 - Definitions of Managed Objects for the
- Ethernet-like Interface Types";
-
- }
-
- identity channel {
- base iana-interface-type;
- description "Channel.";
- }
-
- identity ieee80211 {
- base iana-interface-type;
- description "Radio spread spectrum.";
- }
-
- identity ibm370parChan {
- base iana-interface-type;
- description
- "IBM System 360/370 OEMI Channel.";
- }
-
- identity escon {
- base iana-interface-type;
- description
- "IBM Enterprise Systems Connection.";
- }
-
- identity dlsw {
- base iana-interface-type;
- description "Data Link Switching.";
- }
-
- identity isdns {
- base iana-interface-type;
- description "ISDN S/T interface.";
- }
-
- identity isdnu {
- base iana-interface-type;
- description "ISDN U interface.";
- }
-
- identity lapd {
- base iana-interface-type;
- description "Link Access Protocol D.";
- }
-
- identity ipSwitch {
- base iana-interface-type;
- description "IP Switching Objects.";
- }
-
- identity rsrb {
- base iana-interface-type;
- description
- "Remote Source Route Bridging.";
- }
-
- identity atmLogical {
- base iana-interface-type;
- description "ATM Logical Port.";
- reference
- "RFC 3606 - Definitions of Supplemental Managed Objects
- for ATM Interface";
-
- }
-
- identity ds0 {
- base iana-interface-type;
- description "Digital Signal Level 0.";
- reference
- "RFC 2494 - Definitions of Managed Objects for the DS0
- and DS0 Bundle Interface Type";
-
- }
-
- identity ds0Bundle {
- base iana-interface-type;
- description
- "Group of ds0s on the same ds1.";
- reference
- "RFC 2494 - Definitions of Managed Objects for the DS0
- and DS0 Bundle Interface Type";
-
- }
-
- identity bsc {
- base iana-interface-type;
- description "Bisynchronous Protocol.";
- }
-
- identity async {
- base iana-interface-type;
- description "Asynchronous Protocol.";
- }
-
- identity cnr {
- base iana-interface-type;
- description "Combat Net Radio.";
- }
-
- identity iso88025Dtr {
- base iana-interface-type;
- description "ISO 802.5r DTR.";
- }
-
- identity eplrs {
- base iana-interface-type;
- description "Ext Pos Loc Report Sys.";
- }
-
- identity arap {
- base iana-interface-type;
- description
- "Appletalk Remote Access Protocol.";
- }
-
- identity propCnls {
- base iana-interface-type;
- description
- "Proprietary Connectionless Protocol.";
- }
-
- identity hostPad {
- base iana-interface-type;
- description
- "CCITT-ITU X.29 PAD Protocol.";
- }
-
- identity termPad {
- base iana-interface-type;
- description
- "CCITT-ITU X.3 PAD Facility.";
- }
-
- identity frameRelayMPI {
- base iana-interface-type;
- description
- "Multiproto Interconnect over FR.";
- }
-
- identity x213 {
- base iana-interface-type;
- description "CCITT-ITU X213.";
- }
-
- identity adsl {
- base iana-interface-type;
- description
- "Asymmetric Digital Subscriber Loop.";
- }
-
- identity radsl {
- base iana-interface-type;
- description
- "Rate-Adapt. Digital Subscriber Loop.";
- }
-
- identity sdsl {
- base iana-interface-type;
- description
- "Symmetric Digital Subscriber Loop.";
- }
-
- identity vdsl {
- base iana-interface-type;
- description
- "Very H-Speed Digital Subscrib. Loop.";
- }
-
- identity iso88025CRFPInt {
- base iana-interface-type;
- description "ISO 802.5 CRFP.";
- }
-
- identity myrinet {
- base iana-interface-type;
- description "Myricom Myrinet.";
- }
-
- identity voiceEM {
- base iana-interface-type;
- description
- "Voice recEive and transMit.";
- }
-
- identity voiceFXO {
- base iana-interface-type;
- description
- "Voice Foreign Exchange Office.";
- }
-
- identity voiceFXS {
- base iana-interface-type;
- description
- "Voice Foreign Exchange Station.";
- }
-
- identity voiceEncap {
- base iana-interface-type;
- description "Voice encapsulation.";
- }
-
- identity voiceOverIp {
- base iana-interface-type;
- description
- "Voice over IP encapsulation.";
- }
-
- identity atmDxi {
- base iana-interface-type;
- description "ATM DXI.";
- }
-
- identity atmFuni {
- base iana-interface-type;
- description "ATM FUNI.";
- }
-
- identity atmIma {
- base iana-interface-type;
- description "ATM IMA.";
- }
-
- identity pppMultilinkBundle {
- base iana-interface-type;
- description "PPP Multilink Bundle.";
- }
-
- identity ipOverCdlc {
- base iana-interface-type;
- description "IBM ipOverCdlc.";
- }
-
- identity ipOverClaw {
- base iana-interface-type;
- description
- "IBM Common Link Access to Workstn.";
- }
-
- identity stackToStack {
- base iana-interface-type;
- description "IBM stackToStack.";
- }
-
- identity virtualIpAddress {
- base iana-interface-type;
- description "IBM VIPA.";
- }
-
- identity mpc {
- base iana-interface-type;
- description
- "IBM multi-protocol channel support.";
- }
-
- identity ipOverAtm {
- base iana-interface-type;
- description "IBM ipOverAtm.";
- reference
- "RFC 2320 - Definitions of Managed Objects for Classical IP
- and ARP Over ATM Using SMIv2 (IPOA-MIB)";
-
- }
-
- identity iso88025Fiber {
- base iana-interface-type;
- description
- "ISO 802.5j Fiber Token Ring.";
- }
-
- identity tdlc {
- base iana-interface-type;
- description
- "IBM twinaxial data link control.";
- }
-
- identity gigabitEthernet {
- base iana-interface-type;
- status deprecated;
- description
- "Obsoleted via RFC 3635.
- ethernetCsmacd(6) should be used instead.";
- reference
- "RFC 3635 - Definitions of Managed Objects for the
- Ethernet-like Interface Types";
-
- }
-
- identity hdlc {
- base iana-interface-type;
- description "HDLC.";
- }
-
- identity lapf {
- base iana-interface-type;
- description "LAP F.";
- }
-
- identity v37 {
- base iana-interface-type;
- description "V.37.";
- }
-
- identity x25mlp {
- base iana-interface-type;
- description "Multi-Link Protocol.";
- }
-
- identity x25huntGroup {
- base iana-interface-type;
- description "X25 Hunt Group.";
- }
-
- identity transpHdlc {
- base iana-interface-type;
- description "Transp HDLC.";
- }
-
- identity interleave {
- base iana-interface-type;
- description "Interleave channel.";
- }
-
- identity fast {
- base iana-interface-type;
- description "Fast channel.";
- }
-
- identity ip {
- base iana-interface-type;
- description
- "IP (for APPN HPR in IP networks).";
- }
-
- identity docsCableMaclayer {
- base iana-interface-type;
- description "CATV Mac Layer.";
- }
-
- identity docsCableDownstream {
- base iana-interface-type;
- description
- "CATV Downstream interface.";
- }
-
- identity docsCableUpstream {
- base iana-interface-type;
- description "CATV Upstream interface.";
- }
-
- identity a12MppSwitch {
- base iana-interface-type;
- description
- "Avalon Parallel Processor.";
- }
-
- identity tunnel {
- base iana-interface-type;
- description "Encapsulation interface.";
- }
-
- identity coffee {
- base iana-interface-type;
- description "Coffee pot.";
- reference
- "RFC 2325 - Coffee MIB";
-
- }
-
- identity ces {
- base iana-interface-type;
- description
- "Circuit Emulation Service.";
- }
-
- identity atmSubInterface {
- base iana-interface-type;
- description "ATM Sub Interface.";
- }
-
- identity l2vlan {
- base iana-interface-type;
- description
- "Layer 2 Virtual LAN using 802.1Q.";
- }
-
- identity l3ipvlan {
- base iana-interface-type;
- description
- "Layer 3 Virtual LAN using IP.";
- }
-
- identity l3ipxvlan {
- base iana-interface-type;
- description
- "Layer 3 Virtual LAN using IPX.";
- }
-
- identity digitalPowerline {
- base iana-interface-type;
- description "IP over Power Lines.";
- }
-
- identity mediaMailOverIp {
- base iana-interface-type;
- description "Multimedia Mail over IP.";
- }
-
- identity dtm {
- base iana-interface-type;
- description
- "Dynamic synchronous Transfer Mode.";
- }
-
- identity dcn {
- base iana-interface-type;
- description
- "Data Communications Network.";
- }
-
- identity ipForward {
- base iana-interface-type;
- description "IP Forwarding Interface.";
- }
-
- identity msdsl {
- base iana-interface-type;
- description
- "Multi-rate Symmetric DSL.";
- }
-
- identity ieee1394 {
- base iana-interface-type;
- description
- "IEEE1394 High Performance Serial Bus.";
- }
-
- identity if-gsn {
- base iana-interface-type;
- description "HIPPI-6400.";
- }
-
- identity dvbRccMacLayer {
- base iana-interface-type;
- description "DVB-RCC MAC Layer.";
- }
-
- identity dvbRccDownstream {
- base iana-interface-type;
- description
- "DVB-RCC Downstream Channel.";
- }
-
- identity dvbRccUpstream {
- base iana-interface-type;
- description
- "DVB-RCC Upstream Channel.";
- }
-
- identity atmVirtual {
- base iana-interface-type;
- description "ATM Virtual Interface.";
- }
-
- identity mplsTunnel {
- base iana-interface-type;
- description
- "MPLS Tunnel Virtual Interface.";
- }
-
- identity srp {
- base iana-interface-type;
- description "Spatial Reuse Protocol.";
- }
-
- identity voiceOverAtm {
- base iana-interface-type;
- description "Voice over ATM.";
- }
-
- identity voiceOverFrameRelay {
- base iana-interface-type;
- description "Voice Over Frame Relay.";
- }
-
- identity idsl {
- base iana-interface-type;
- description
- "Digital Subscriber Loop over ISDN.";
- }
-
- identity compositeLink {
- base iana-interface-type;
- description
- "Avici Composite Link Interface.";
- }
-
- identity ss7SigLink {
- base iana-interface-type;
- description "SS7 Signaling Link.";
- }
-
- identity propWirelessP2P {
- base iana-interface-type;
- description
- "Prop. P2P wireless interface.";
- }
-
- identity frForward {
- base iana-interface-type;
- description "Frame Forward Interface.";
- }
-
- identity rfc1483 {
- base iana-interface-type;
- description
- "Multiprotocol over ATM AAL5.";
- reference
- "RFC 1483 - Multiprotocol Encapsulation over ATM
- Adaptation Layer 5";
-
- }
-
- identity usb {
- base iana-interface-type;
- description "USB Interface.";
- }
-
- identity ieee8023adLag {
- base iana-interface-type;
- description
- "IEEE 802.3ad Link Aggregate.";
- }
-
- identity bgppolicyaccounting {
- base iana-interface-type;
- description "BGP Policy Accounting.";
- }
-
- identity frf16MfrBundle {
- base iana-interface-type;
- description
- "FRF.16 Multilink Frame Relay.";
- }
-
- identity h323Gatekeeper {
- base iana-interface-type;
- description "H323 Gatekeeper.";
- }
-
- identity h323Proxy {
- base iana-interface-type;
- description
- "H323 Voice and Video Proxy.";
- }
-
- identity mpls {
- base iana-interface-type;
- description "MPLS.";
- }
-
- identity mfSigLink {
- base iana-interface-type;
- description
- "Multi-frequency signaling link.";
- }
-
- identity hdsl2 {
- base iana-interface-type;
- description
- "High Bit-Rate DSL - 2nd generation.";
- }
-
- identity shdsl {
- base iana-interface-type;
- description "Multirate HDSL2.";
- }
-
- identity ds1FDL {
- base iana-interface-type;
- description
- "Facility Data Link (4Kbps) on a DS1.";
- }
-
- identity pos {
- base iana-interface-type;
- description
- "Packet over SONET/SDH Interface.";
- }
-
- identity dvbAsiIn {
- base iana-interface-type;
- description "DVB-ASI Input.";
- }
-
- identity dvbAsiOut {
- base iana-interface-type;
- description "DVB-ASI Output.";
- }
-
- identity plc {
- base iana-interface-type;
- description
- "Power Line Communications.";
- }
-
- identity nfas {
- base iana-interface-type;
- description
- "Non-Facility Associated Signaling.";
- }
-
- identity tr008 {
- base iana-interface-type;
- description "TR008.";
- }
-
- identity gr303RDT {
- base iana-interface-type;
- description "Remote Digital Terminal.";
- }
-
- identity gr303IDT {
- base iana-interface-type;
- description
- "Integrated Digital Terminal.";
- }
-
- identity isup {
- base iana-interface-type;
- description "ISUP.";
- }
-
- identity propDocsWirelessMaclayer {
- base iana-interface-type;
- description
- "Cisco proprietary Maclayer.";
- }
-
- identity propDocsWirelessDownstream {
- base iana-interface-type;
- description
- "Cisco proprietary Downstream.";
- }
-
- identity propDocsWirelessUpstream {
- base iana-interface-type;
- description
- "Cisco proprietary Upstream.";
- }
-
- identity hiperlan2 {
- base iana-interface-type;
- description
- "HIPERLAN Type 2 Radio Interface.";
- }
-
- identity propBWAp2Mp {
- base iana-interface-type;
- description
- "PropBroadbandWirelessAccesspt2Multipt (use of this value
- for IEEE 802.16 WMAN interfaces as per IEEE Std 802.16f
- is deprecated, and ieee80216WMAN(237) should be used
- instead).";
- }
-
- identity sonetOverheadChannel {
- base iana-interface-type;
- description "SONET Overhead Channel.";
- }
-
- identity digitalWrapperOverheadChannel {
- base iana-interface-type;
- description "Digital Wrapper.";
- }
-
- identity aal2 {
- base iana-interface-type;
- description "ATM adaptation layer 2.";
- }
-
- identity radioMAC {
- base iana-interface-type;
- description
- "MAC layer over radio links.";
- }
-
- identity atmRadio {
- base iana-interface-type;
- description "ATM over radio links.";
- }
-
- identity imt {
- base iana-interface-type;
- description "Inter-Machine Trunks.";
- }
-
- identity mvl {
- base iana-interface-type;
- description
- "Multiple Virtual Lines DSL.";
- }
-
- identity reachDSL {
- base iana-interface-type;
- description "Long Reach DSL.";
- }
-
- identity frDlciEndPt {
- base iana-interface-type;
- description
- "Frame Relay DLCI End Point.";
- }
-
- identity atmVciEndPt {
- base iana-interface-type;
- description "ATM VCI End Point.";
- }
-
- identity opticalChannel {
- base iana-interface-type;
- description "Optical Channel.";
- }
-
- identity opticalTransport {
- base iana-interface-type;
- description "Optical Transport.";
- }
-
- identity propAtm {
- base iana-interface-type;
- description "Proprietary ATM.";
- }
-
- identity voiceOverCable {
- base iana-interface-type;
- description
- "Voice Over Cable Interface.";
- }
-
- identity infiniband {
- base iana-interface-type;
- description "Infiniband.";
- }
-
- identity teLink {
- base iana-interface-type;
- description "TE Link.";
- }
-
- identity q2931 {
- base iana-interface-type;
- description "Q.2931.";
- }
-
- identity virtualTg {
- base iana-interface-type;
- description "Virtual Trunk Group.";
- }
-
- identity sipTg {
- base iana-interface-type;
- description "SIP Trunk Group.";
- }
-
- identity sipSig {
- base iana-interface-type;
- description "SIP Signaling.";
- }
-
- identity docsCableUpstreamChannel {
- base iana-interface-type;
- description "CATV Upstream Channel.";
- }
-
- identity econet {
- base iana-interface-type;
- description "Acorn Econet.";
- }
-
- identity pon155 {
- base iana-interface-type;
- description
- "FSAN 155Mb Symetrical PON interface.";
- }
-
- identity pon622 {
- base iana-interface-type;
- description
- "FSAN 622Mb Symetrical PON interface.";
- }
-
- identity bridge {
- base iana-interface-type;
- description
- "Transparent bridge interface.";
- }
-
- identity linegroup {
- base iana-interface-type;
- description
- "Interface common to multiple lines.";
- }
-
- identity voiceEMFGD {
- base iana-interface-type;
- description
- "Voice E&M Feature Group D.";
- }
-
- identity voiceFGDEANA {
- base iana-interface-type;
- description
- "Voice FGD Exchange Access North American.";
- }
-
- identity voiceDID {
- base iana-interface-type;
- description
- "Voice Direct Inward Dialing.";
- }
-
- identity mpegTransport {
- base iana-interface-type;
- description
- "MPEG transport interface.";
- }
-
- identity sixToFour {
- base iana-interface-type;
- status deprecated;
- description
- "6to4 interface (DEPRECATED).";
- reference
- "RFC 4087 - IP Tunnel MIB";
-
- }
-
- identity gtp {
- base iana-interface-type;
- description
- "GTP (GPRS Tunneling Protocol).";
- }
-
- identity pdnEtherLoop1 {
- base iana-interface-type;
- description "Paradyne EtherLoop 1.";
- }
-
- identity pdnEtherLoop2 {
- base iana-interface-type;
- description "Paradyne EtherLoop 2.";
- }
-
- identity opticalChannelGroup {
- base iana-interface-type;
- description "Optical Channel Group.";
- }
-
- identity homepna {
- base iana-interface-type;
- description "HomePNA ITU-T G.989.";
- }
-
- identity gfp {
- base iana-interface-type;
- description
- "Generic Framing Procedure (GFP).";
- }
-
- identity ciscoISLvlan {
- base iana-interface-type;
- description
- "Layer 2 Virtual LAN using Cisco ISL.";
- }
-
- identity actelisMetaLOOP {
- base iana-interface-type;
- description
- "Acteleis proprietary MetaLOOP High Speed Link.";
- }
-
- identity fcipLink {
- base iana-interface-type;
- description "FCIP Link.";
- }
-
- identity rpr {
- base iana-interface-type;
- description
- "Resilient Packet Ring Interface Type.";
- }
-
- identity qam {
- base iana-interface-type;
- description "RF Qam Interface.";
- }
-
- identity lmp {
- base iana-interface-type;
- description
- "Link Management Protocol.";
- reference
- "RFC 4327 - Link Management Protocol (LMP) Management
- Information Base (MIB)";
-
- }
-
- identity cblVectaStar {
- base iana-interface-type;
- description
- "Cambridge Broadband Networks Limited VectaStar.";
- }
-
- identity docsCableMCmtsDownstream {
- base iana-interface-type;
- description
- "CATV Modular CMTS Downstream Interface.";
- }
-
- identity adsl2 {
- base iana-interface-type;
- status deprecated;
- description
- "Asymmetric Digital Subscriber Loop Version 2
- (DEPRECATED/OBSOLETED - please use adsl2plus(238)
- instead).";
- reference
- "RFC 4706 - Definitions of Managed Objects for Asymmetric
- Digital Subscriber Line 2 (ADSL2)";
-
- }
-
- identity macSecControlledIF {
- base iana-interface-type;
- description "MACSecControlled.";
- }
-
- identity macSecUncontrolledIF {
- base iana-interface-type;
- description "MACSecUncontrolled.";
- }
-
- identity aviciOpticalEther {
- base iana-interface-type;
- description
- "Avici Optical Ethernet Aggregate.";
- }
-
- identity atmbond {
- base iana-interface-type;
- description "atmbond.";
- }
-
- identity voiceFGDOS {
- base iana-interface-type;
- description
- "Voice FGD Operator Services.";
- }
-
- identity mocaVersion1 {
- base iana-interface-type;
- description
- "MultiMedia over Coax Alliance (MoCA) Interface
- as documented in information provided privately to IANA.";
- }
-
- identity ieee80216WMAN {
- base iana-interface-type;
- description
- "IEEE 802.16 WMAN interface.";
- }
-
- identity adsl2plus {
- base iana-interface-type;
- description
- "Asymmetric Digital Subscriber Loop Version 2 -
- Version 2 Plus and all variants.";
- }
-
- identity dvbRcsMacLayer {
- base iana-interface-type;
- description "DVB-RCS MAC Layer.";
- reference
- "RFC 5728 - The SatLabs Group DVB-RCS MIB";
-
- }
-
- identity dvbTdm {
- base iana-interface-type;
- description "DVB Satellite TDM.";
- reference
- "RFC 5728 - The SatLabs Group DVB-RCS MIB";
-
- }
-
- identity dvbRcsTdma {
- base iana-interface-type;
- description "DVB-RCS TDMA.";
- reference
- "RFC 5728 - The SatLabs Group DVB-RCS MIB";
-
- }
-
- identity x86Laps {
- base iana-interface-type;
- description
- "LAPS based on ITU-T X.86/Y.1323.";
- }
-
- identity wwanPP {
- base iana-interface-type;
- description "3GPP WWAN.";
- }
-
- identity wwanPP2 {
- base iana-interface-type;
- description "3GPP2 WWAN.";
- }
-
- identity voiceEBS {
- base iana-interface-type;
- description
- "Voice P-phone EBS physical interface.";
- }
-
- identity ifPwType {
- base iana-interface-type;
- description
- "Pseudowire interface type.";
- reference
- "RFC 5601 - Pseudowire (PW) Management Information Base (MIB)";
-
- }
-
- identity ilan {
- base iana-interface-type;
- description
- "Internal LAN on a bridge per IEEE 802.1ap.";
- }
-
- identity pip {
- base iana-interface-type;
- description
- "Provider Instance Port on a bridge per IEEE 802.1ah PBB.";
- }
-
- identity aluELP {
- base iana-interface-type;
- description
- "Alcatel-Lucent Ethernet Link Protection.";
- }
-
- identity gpon {
- base iana-interface-type;
- description
- "Gigabit-capable passive optical networks (G-PON) as per
- ITU-T G.948.";
- }
-
- identity vdsl2 {
- base iana-interface-type;
- description
- "Very high speed digital subscriber line Version 2
- (as per ITU-T Recommendation G.993.2).";
- reference
- "RFC 5650 - Definitions of Managed Objects for Very High
- Speed Digital Subscriber Line 2 (VDSL2)";
-
- }
-
- identity capwapDot11Profile {
- base iana-interface-type;
- description "WLAN Profile Interface.";
- reference
- "RFC 5834 - Control and Provisioning of Wireless Access
- Points (CAPWAP) Protocol Binding MIB for
- IEEE 802.11";
-
- }
-
- identity capwapDot11Bss {
- base iana-interface-type;
- description "WLAN BSS Interface.";
- reference
- "RFC 5834 - Control and Provisioning of Wireless Access
- Points (CAPWAP) Protocol Binding MIB for
- IEEE 802.11";
-
- }
-
- identity capwapWtpVirtualRadio {
- base iana-interface-type;
- description
- "WTP Virtual Radio Interface.";
- reference
- "RFC 5833 - Control and Provisioning of Wireless Access
- Points (CAPWAP) Protocol Base MIB";
-
- }
-
- identity bits {
- base iana-interface-type;
- description "bitsport.";
- }
-
- identity docsCableUpstreamRfPort {
- base iana-interface-type;
- description
- "DOCSIS CATV Upstream RF Port.";
- }
-
- identity cableDownstreamRfPort {
- base iana-interface-type;
- description "CATV downstream RF Port.";
- }
-
- identity vmwareVirtualNic {
- base iana-interface-type;
- description
- "VMware Virtual Network Interface.";
- }
-
- identity ieee802154 {
- base iana-interface-type;
- description
- "IEEE 802.15.4 WPAN interface.";
- reference
- "IEEE 802.15.4-2006";
-
- }
-
- identity otnOdu {
- base iana-interface-type;
- description "OTN Optical Data Unit.";
- }
-
- identity otnOtu {
- base iana-interface-type;
- description
- "OTN Optical channel Transport Unit.";
- }
-
- identity ifVfiType {
- base iana-interface-type;
- description
- "VPLS Forwarding Instance Interface Type.";
- }
-
- identity g9981 {
- base iana-interface-type;
- description
- "G.998.1 bonded interface.";
- }
-
- identity g9982 {
- base iana-interface-type;
- description
- "G.998.2 bonded interface.";
- }
-
- identity g9983 {
- base iana-interface-type;
- description
- "G.998.3 bonded interface.";
- }
-
- identity aluEpon {
- base iana-interface-type;
- description
- "Ethernet Passive Optical Networks (E-PON).";
- }
-
- identity aluEponOnu {
- base iana-interface-type;
- description
- "EPON Optical Network Unit.";
- }
-
- identity aluEponPhysicalUni {
- base iana-interface-type;
- description
- "EPON physical User to Network interface.";
- }
-
- identity aluEponLogicalLink {
- base iana-interface-type;
- description
- "The emulation of a point-to-point link over the EPON
- layer.";
- }
-
- identity aluGponOnu {
- base iana-interface-type;
- description
- "GPON Optical Network Unit.";
- reference
- "ITU-T G.984.2";
-
- }
-
- identity aluGponPhysicalUni {
- base iana-interface-type;
- description
- "GPON physical User to Network interface.";
- reference
- "ITU-T G.984.2";
-
- }
-
- identity vmwareNicTeam {
- base iana-interface-type;
- description "VMware NIC Team.";
- }
- } // module iana-if-type
diff --git a/utils/sysrepo-plugins/yang/ietf/ietf-interfaces.yang b/utils/sysrepo-plugins/yang/ietf/ietf-interfaces.yang
deleted file mode 100644
index f66c205ce..000000000
--- a/utils/sysrepo-plugins/yang/ietf/ietf-interfaces.yang
+++ /dev/null
@@ -1,1123 +0,0 @@
-module ietf-interfaces {
- yang-version 1.1;
- namespace "urn:ietf:params:xml:ns:yang:ietf-interfaces";
- prefix if;
-
- import ietf-yang-types {
- prefix yang;
- }
-
- organization
- "IETF NETMOD (Network Modeling) Working Group";
-
- contact
- "WG Web: <https://datatracker.ietf.org/wg/netmod/>
- WG List: <mailto:netmod@ietf.org>
-
- Editor: Martin Bjorklund
- <mailto:mbj@tail-f.com>";
-
- description
- "This module contains a collection of YANG definitions for
- managing network interfaces.
-
- Copyright (c) 2018 IETF Trust and the persons identified as
- authors of the code. All rights reserved.
-
- Redistribution and use in source and binary forms, with or
- without modification, is permitted pursuant to, and subject
- to the license terms contained in, the Simplified BSD License
- set forth in Section 4.c of the IETF Trust's Legal Provisions
- Relating to IETF Documents
- (https://trustee.ietf.org/license-info).
-
- This version of this YANG module is part of RFC 8343; see
- the RFC itself for full legal notices.";
-
- revision 2018-02-20 {
- description
- "Updated to support NMDA.";
- reference
- "RFC 8343: A YANG Data Model for Interface Management";
- }
-
- revision 2014-05-08 {
- description
- "Initial revision.";
- reference
- "RFC 7223: A YANG Data Model for Interface Management";
- }
-
- /*
- * Typedefs
- */
-
- typedef interface-ref {
- type leafref {
- path "/if:interfaces/if:interface/if:name";
- }
- description
- "This type is used by data models that need to reference
- interfaces.";
- }
-
- /*
- * Identities
- */
-
- identity interface-type {
- description
- "Base identity from which specific interface types are
- derived.";
- }
-
- /*
- * Features
- */
-
- feature arbitrary-names {
- description
- "This feature indicates that the device allows user-controlled
- interfaces to be named arbitrarily.";
- }
- feature pre-provisioning {
- description
- "This feature indicates that the device supports
- pre-provisioning of interface configuration, i.e., it is
- possible to configure an interface whose physical interface
- hardware is not present on the device.";
- }
- feature if-mib {
- description
- "This feature indicates that the device implements
- the IF-MIB.";
- reference
- "RFC 2863: The Interfaces Group MIB";
- }
-
- /*
- * Data nodes
- */
-
- container interfaces {
- description
- "Interface parameters.";
-
- list interface {
- key "name";
-
- description
- "The list of interfaces on the device.
-
- The status of an interface is available in this list in the
- operational state. If the configuration of a
- system-controlled interface cannot be used by the system
- (e.g., the interface hardware present does not match the
- interface type), then the configuration is not applied to
- the system-controlled interface shown in the operational
- state. If the configuration of a user-controlled interface
- cannot be used by the system, the configured interface is
- not instantiated in the operational state.
-
- System-controlled interfaces created by the system are
- always present in this list in the operational state,
- whether or not they are configured.";
-
- leaf name {
- type string;
- description
- "The name of the interface.
-
- A device MAY restrict the allowed values for this leaf,
- possibly depending on the type of the interface.
- For system-controlled interfaces, this leaf is the
- device-specific name of the interface.
-
- If a client tries to create configuration for a
- system-controlled interface that is not present in the
- operational state, the server MAY reject the request if
- the implementation does not support pre-provisioning of
- interfaces or if the name refers to an interface that can
- never exist in the system. A Network Configuration
- Protocol (NETCONF) server MUST reply with an rpc-error
- with the error-tag 'invalid-value' in this case.
-
- If the device supports pre-provisioning of interface
- configuration, the 'pre-provisioning' feature is
- advertised.
-
- If the device allows arbitrarily named user-controlled
- interfaces, the 'arbitrary-names' feature is advertised.
-
- When a configured user-controlled interface is created by
- the system, it is instantiated with the same name in the
- operational state.
-
- A server implementation MAY map this leaf to the ifName
- MIB object. Such an implementation needs to use some
- mechanism to handle the differences in size and characters
- allowed between this leaf and ifName. The definition of
- such a mechanism is outside the scope of this document.";
- reference
- "RFC 2863: The Interfaces Group MIB - ifName";
- }
-
- leaf description {
- type string;
- description
- "A textual description of the interface.
-
- A server implementation MAY map this leaf to the ifAlias
- MIB object. Such an implementation needs to use some
- mechanism to handle the differences in size and characters
- allowed between this leaf and ifAlias. The definition of
- such a mechanism is outside the scope of this document.
-
- Since ifAlias is defined to be stored in non-volatile
- storage, the MIB implementation MUST map ifAlias to the
- value of 'description' in the persistently stored
- configuration.";
- reference
- "RFC 2863: The Interfaces Group MIB - ifAlias";
- }
-
- leaf type {
- type identityref {
- base interface-type;
- }
- mandatory true;
- description
- "The type of the interface.
-
- When an interface entry is created, a server MAY
- initialize the type leaf with a valid value, e.g., if it
- is possible to derive the type from the name of the
- interface.
-
- If a client tries to set the type of an interface to a
- value that can never be used by the system, e.g., if the
- type is not supported or if the type does not match the
- name of the interface, the server MUST reject the request.
- A NETCONF server MUST reply with an rpc-error with the
- error-tag 'invalid-value' in this case.";
- reference
- "RFC 2863: The Interfaces Group MIB - ifType";
- }
-
- leaf enabled {
- type boolean;
- default "true";
- description
- "This leaf contains the configured, desired state of the
- interface.
-
- Systems that implement the IF-MIB use the value of this
- leaf in the intended configuration to set
- IF-MIB.ifAdminStatus to 'up' or 'down' after an ifEntry
- has been initialized, as described in RFC 2863.
-
- Changes in this leaf in the intended configuration are
- reflected in ifAdminStatus.";
- reference
- "RFC 2863: The Interfaces Group MIB - ifAdminStatus";
- }
-
- leaf link-up-down-trap-enable {
- if-feature if-mib;
- type enumeration {
- enum enabled {
- value 1;
- description
- "The device will generate linkUp/linkDown SNMP
- notifications for this interface.";
- }
- enum disabled {
- value 2;
- description
- "The device will not generate linkUp/linkDown SNMP
- notifications for this interface.";
- }
- }
- description
- "Controls whether linkUp/linkDown SNMP notifications
- should be generated for this interface.
-
- If this node is not configured, the value 'enabled' is
- operationally used by the server for interfaces that do
- not operate on top of any other interface (i.e., there are
- no 'lower-layer-if' entries), and 'disabled' otherwise.";
- reference
- "RFC 2863: The Interfaces Group MIB -
- ifLinkUpDownTrapEnable";
- }
-
- leaf admin-status {
- if-feature if-mib;
- type enumeration {
- enum up {
- value 1;
- description
- "Ready to pass packets.";
- }
- enum down {
- value 2;
- description
- "Not ready to pass packets and not in some test mode.";
- }
- enum testing {
- value 3;
- description
- "In some test mode.";
- }
- }
- config false;
- mandatory true;
- description
- "The desired state of the interface.
-
- This leaf has the same read semantics as ifAdminStatus.";
- reference
- "RFC 2863: The Interfaces Group MIB - ifAdminStatus";
- }
-
- leaf oper-status {
- type enumeration {
- enum up {
- value 1;
- description
- "Ready to pass packets.";
- }
- enum down {
- value 2;
-
- description
- "The interface does not pass any packets.";
- }
- enum testing {
- value 3;
- description
- "In some test mode. No operational packets can
- be passed.";
- }
- enum unknown {
- value 4;
- description
- "Status cannot be determined for some reason.";
- }
- enum dormant {
- value 5;
- description
- "Waiting for some external event.";
- }
- enum not-present {
- value 6;
- description
- "Some component (typically hardware) is missing.";
- }
- enum lower-layer-down {
- value 7;
- description
- "Down due to state of lower-layer interface(s).";
- }
- }
- config false;
- mandatory true;
- description
- "The current operational state of the interface.
-
- This leaf has the same semantics as ifOperStatus.";
- reference
- "RFC 2863: The Interfaces Group MIB - ifOperStatus";
- }
-
- leaf last-change {
- type yang:date-and-time;
- config false;
- description
- "The time the interface entered its current operational
- state. If the current state was entered prior to the
- last re-initialization of the local network management
- subsystem, then this node is not present.";
- reference
- "RFC 2863: The Interfaces Group MIB - ifLastChange";
- }
-
- leaf if-index {
- if-feature if-mib;
- type int32 {
- range "1..2147483647";
- }
- config false;
- mandatory true;
- description
- "The ifIndex value for the ifEntry represented by this
- interface.";
- reference
- "RFC 2863: The Interfaces Group MIB - ifIndex";
- }
-
- leaf phys-address {
- type yang:phys-address;
- config false;
- description
- "The interface's address at its protocol sub-layer. For
- example, for an 802.x interface, this object normally
- contains a Media Access Control (MAC) address. The
- interface's media-specific modules must define the bit
- and byte ordering and the format of the value of this
- object. For interfaces that do not have such an address
- (e.g., a serial line), this node is not present.";
- reference
- "RFC 2863: The Interfaces Group MIB - ifPhysAddress";
- }
-
- leaf-list higher-layer-if {
- type interface-ref;
- config false;
- description
- "A list of references to interfaces layered on top of this
- interface.";
- reference
- "RFC 2863: The Interfaces Group MIB - ifStackTable";
- }
-
- leaf-list lower-layer-if {
- type interface-ref;
- config false;
-
- description
- "A list of references to interfaces layered underneath this
- interface.";
- reference
- "RFC 2863: The Interfaces Group MIB - ifStackTable";
- }
-
- leaf speed {
- type yang:gauge64;
- units "bits/second";
- config false;
- description
- "An estimate of the interface's current bandwidth in bits
- per second. For interfaces that do not vary in
- bandwidth or for those where no accurate estimation can
- be made, this node should contain the nominal bandwidth.
- For interfaces that have no concept of bandwidth, this
- node is not present.";
- reference
- "RFC 2863: The Interfaces Group MIB -
- ifSpeed, ifHighSpeed";
- }
-
- container statistics {
- config false;
- description
- "A collection of interface-related statistics objects.";
-
- leaf discontinuity-time {
- type yang:date-and-time;
- mandatory true;
- description
- "The time on the most recent occasion at which any one or
- more of this interface's counters suffered a
- discontinuity. If no such discontinuities have occurred
- since the last re-initialization of the local management
- subsystem, then this node contains the time the local
- management subsystem re-initialized itself.";
- }
-
- leaf in-octets {
- type yang:counter64;
- description
- "The total number of octets received on the interface,
- including framing characters.
-
- Discontinuities in the value of this counter can occur
- at re-initialization of the management system and at
- other times as indicated by the value of
- 'discontinuity-time'.";
- reference
- "RFC 2863: The Interfaces Group MIB - ifHCInOctets";
- }
-
- leaf in-unicast-pkts {
- type yang:counter64;
- description
- "The number of packets, delivered by this sub-layer to a
- higher (sub-)layer, that were not addressed to a
- multicast or broadcast address at this sub-layer.
-
- Discontinuities in the value of this counter can occur
- at re-initialization of the management system and at
- other times as indicated by the value of
- 'discontinuity-time'.";
- reference
- "RFC 2863: The Interfaces Group MIB - ifHCInUcastPkts";
- }
-
- leaf in-broadcast-pkts {
- type yang:counter64;
- description
- "The number of packets, delivered by this sub-layer to a
- higher (sub-)layer, that were addressed to a broadcast
- address at this sub-layer.
-
- Discontinuities in the value of this counter can occur
- at re-initialization of the management system and at
- other times as indicated by the value of
- 'discontinuity-time'.";
- reference
- "RFC 2863: The Interfaces Group MIB -
- ifHCInBroadcastPkts";
- }
-
- leaf in-multicast-pkts {
- type yang:counter64;
- description
- "The number of packets, delivered by this sub-layer to a
- higher (sub-)layer, that were addressed to a multicast
- address at this sub-layer. For a MAC-layer protocol,
- this includes both Group and Functional addresses.
-
- Discontinuities in the value of this counter can occur
- at re-initialization of the management system and at
- other times as indicated by the value of
- 'discontinuity-time'.";
- reference
- "RFC 2863: The Interfaces Group MIB -
- ifHCInMulticastPkts";
- }
-
- leaf in-discards {
- type yang:counter32;
- description
- "The number of inbound packets that were chosen to be
- discarded even though no errors had been detected to
- prevent their being deliverable to a higher-layer
- protocol. One possible reason for discarding such a
- packet could be to free up buffer space.
-
- Discontinuities in the value of this counter can occur
- at re-initialization of the management system and at
- other times as indicated by the value of
- 'discontinuity-time'.";
- reference
- "RFC 2863: The Interfaces Group MIB - ifInDiscards";
- }
-
- leaf in-errors {
- type yang:counter32;
- description
- "For packet-oriented interfaces, the number of inbound
- packets that contained errors preventing them from being
- deliverable to a higher-layer protocol. For character-
- oriented or fixed-length interfaces, the number of
- inbound transmission units that contained errors
- preventing them from being deliverable to a higher-layer
- protocol.
-
- Discontinuities in the value of this counter can occur
- at re-initialization of the management system and at
- other times as indicated by the value of
- 'discontinuity-time'.";
- reference
- "RFC 2863: The Interfaces Group MIB - ifInErrors";
- }
-
- leaf in-unknown-protos {
- type yang:counter32;
-
- description
- "For packet-oriented interfaces, the number of packets
- received via the interface that were discarded because
- of an unknown or unsupported protocol. For
- character-oriented or fixed-length interfaces that
- support protocol multiplexing, the number of
- transmission units received via the interface that were
- discarded because of an unknown or unsupported protocol.
- For any interface that does not support protocol
- multiplexing, this counter is not present.
-
- Discontinuities in the value of this counter can occur
- at re-initialization of the management system and at
- other times as indicated by the value of
- 'discontinuity-time'.";
- reference
- "RFC 2863: The Interfaces Group MIB - ifInUnknownProtos";
- }
-
- leaf out-octets {
- type yang:counter64;
- description
- "The total number of octets transmitted out of the
- interface, including framing characters.
-
- Discontinuities in the value of this counter can occur
- at re-initialization of the management system and at
- other times as indicated by the value of
- 'discontinuity-time'.";
- reference
- "RFC 2863: The Interfaces Group MIB - ifHCOutOctets";
- }
-
- leaf out-unicast-pkts {
- type yang:counter64;
- description
- "The total number of packets that higher-level protocols
- requested be transmitted and that were not addressed
- to a multicast or broadcast address at this sub-layer,
- including those that were discarded or not sent.
-
- Discontinuities in the value of this counter can occur
- at re-initialization of the management system and at
- other times as indicated by the value of
- 'discontinuity-time'.";
- reference
- "RFC 2863: The Interfaces Group MIB - ifHCOutUcastPkts";
- }
-
- leaf out-broadcast-pkts {
- type yang:counter64;
- description
- "The total number of packets that higher-level protocols
- requested be transmitted and that were addressed to a
- broadcast address at this sub-layer, including those
- that were discarded or not sent.
-
- Discontinuities in the value of this counter can occur
- at re-initialization of the management system and at
- other times as indicated by the value of
- 'discontinuity-time'.";
- reference
- "RFC 2863: The Interfaces Group MIB -
- ifHCOutBroadcastPkts";
- }
-
- leaf out-multicast-pkts {
- type yang:counter64;
- description
- "The total number of packets that higher-level protocols
- requested be transmitted and that were addressed to a
- multicast address at this sub-layer, including those
- that were discarded or not sent. For a MAC-layer
- protocol, this includes both Group and Functional
- addresses.
-
- Discontinuities in the value of this counter can occur
- at re-initialization of the management system and at
- other times as indicated by the value of
- 'discontinuity-time'.";
- reference
- "RFC 2863: The Interfaces Group MIB -
- ifHCOutMulticastPkts";
- }
-
- leaf out-discards {
- type yang:counter32;
- description
- "The number of outbound packets that were chosen to be
- discarded even though no errors had been detected to
- prevent their being transmitted. One possible reason
- for discarding such a packet could be to free up buffer
- space.
-
- Discontinuities in the value of this counter can occur
- at re-initialization of the management system and at
- other times as indicated by the value of
- 'discontinuity-time'.";
- reference
- "RFC 2863: The Interfaces Group MIB - ifOutDiscards";
- }
-
- leaf out-errors {
- type yang:counter32;
- description
- "For packet-oriented interfaces, the number of outbound
- packets that could not be transmitted because of errors.
- For character-oriented or fixed-length interfaces, the
- number of outbound transmission units that could not be
- transmitted because of errors.
-
- Discontinuities in the value of this counter can occur
- at re-initialization of the management system and at
- other times as indicated by the value of
- 'discontinuity-time'.";
- reference
- "RFC 2863: The Interfaces Group MIB - ifOutErrors";
- }
- }
-
- }
- }
-
- /*
- * Legacy typedefs
- */
-
- typedef interface-state-ref {
- type leafref {
- path "/if:interfaces-state/if:interface/if:name";
- }
- status deprecated;
- description
- "This type is used by data models that need to reference
- the operationally present interfaces.";
- }
-
- /*
- * Legacy operational state data nodes
- */
-
- container interfaces-state {
- config false;
- status deprecated;
- description
- "Data nodes for the operational state of interfaces.";
-
- list interface {
- key "name";
- status deprecated;
-
- description
- "The list of interfaces on the device.
-
- System-controlled interfaces created by the system are
- always present in this list, whether or not they are
- configured.";
-
- leaf name {
- type string;
- status deprecated;
- description
- "The name of the interface.
-
- A server implementation MAY map this leaf to the ifName
- MIB object. Such an implementation needs to use some
- mechanism to handle the differences in size and characters
- allowed between this leaf and ifName. The definition of
- such a mechanism is outside the scope of this document.";
- reference
- "RFC 2863: The Interfaces Group MIB - ifName";
- }
-
- leaf type {
- type identityref {
- base interface-type;
- }
- mandatory true;
- status deprecated;
- description
- "The type of the interface.";
- reference
- "RFC 2863: The Interfaces Group MIB - ifType";
- }
-
- leaf admin-status {
- if-feature if-mib;
- type enumeration {
- enum up {
- value 1;
- description
- "Ready to pass packets.";
- }
- enum down {
- value 2;
- description
- "Not ready to pass packets and not in some test mode.";
- }
- enum testing {
- value 3;
- description
- "In some test mode.";
- }
- }
- mandatory true;
- status deprecated;
- description
- "The desired state of the interface.
-
- This leaf has the same read semantics as ifAdminStatus.";
- reference
- "RFC 2863: The Interfaces Group MIB - ifAdminStatus";
- }
-
- leaf oper-status {
- type enumeration {
- enum up {
- value 1;
- description
- "Ready to pass packets.";
- }
- enum down {
- value 2;
- description
- "The interface does not pass any packets.";
- }
- enum testing {
- value 3;
- description
- "In some test mode. No operational packets can
- be passed.";
- }
- enum unknown {
- value 4;
- description
- "Status cannot be determined for some reason.";
- }
- enum dormant {
- value 5;
- description
- "Waiting for some external event.";
- }
- enum not-present {
- value 6;
- description
- "Some component (typically hardware) is missing.";
- }
- enum lower-layer-down {
- value 7;
- description
- "Down due to state of lower-layer interface(s).";
- }
- }
- mandatory true;
- status deprecated;
- description
- "The current operational state of the interface.
-
- This leaf has the same semantics as ifOperStatus.";
- reference
- "RFC 2863: The Interfaces Group MIB - ifOperStatus";
- }
-
- leaf last-change {
- type yang:date-and-time;
- status deprecated;
- description
- "The time the interface entered its current operational
- state. If the current state was entered prior to the
- last re-initialization of the local network management
- subsystem, then this node is not present.";
- reference
- "RFC 2863: The Interfaces Group MIB - ifLastChange";
- }
-
- leaf if-index {
- if-feature if-mib;
- type int32 {
- range "1..2147483647";
- }
- mandatory true;
- status deprecated;
- description
- "The ifIndex value for the ifEntry represented by this
- interface.";
-
- reference
- "RFC 2863: The Interfaces Group MIB - ifIndex";
- }
-
- leaf phys-address {
- type yang:phys-address;
- status deprecated;
- description
- "The interface's address at its protocol sub-layer. For
- example, for an 802.x interface, this object normally
- contains a Media Access Control (MAC) address. The
- interface's media-specific modules must define the bit
- and byte ordering and the format of the value of this
- object. For interfaces that do not have such an address
- (e.g., a serial line), this node is not present.";
- reference
- "RFC 2863: The Interfaces Group MIB - ifPhysAddress";
- }
-
- leaf-list higher-layer-if {
- type interface-state-ref;
- status deprecated;
- description
- "A list of references to interfaces layered on top of this
- interface.";
- reference
- "RFC 2863: The Interfaces Group MIB - ifStackTable";
- }
-
- leaf-list lower-layer-if {
- type interface-state-ref;
- status deprecated;
- description
- "A list of references to interfaces layered underneath this
- interface.";
- reference
- "RFC 2863: The Interfaces Group MIB - ifStackTable";
- }
-
- leaf speed {
- type yang:gauge64;
- units "bits/second";
- status deprecated;
- description
- "An estimate of the interface's current bandwidth in bits
- per second. For interfaces that do not vary in
- bandwidth or for those where no accurate estimation can
-
- be made, this node should contain the nominal bandwidth.
- For interfaces that have no concept of bandwidth, this
- node is not present.";
- reference
- "RFC 2863: The Interfaces Group MIB -
- ifSpeed, ifHighSpeed";
- }
-
- container statistics {
- status deprecated;
- description
- "A collection of interface-related statistics objects.";
-
- leaf discontinuity-time {
- type yang:date-and-time;
- mandatory true;
- status deprecated;
- description
- "The time on the most recent occasion at which any one or
- more of this interface's counters suffered a
- discontinuity. If no such discontinuities have occurred
- since the last re-initialization of the local management
- subsystem, then this node contains the time the local
- management subsystem re-initialized itself.";
- }
-
- leaf in-octets {
- type yang:counter64;
- status deprecated;
- description
- "The total number of octets received on the interface,
- including framing characters.
-
- Discontinuities in the value of this counter can occur
- at re-initialization of the management system and at
- other times as indicated by the value of
- 'discontinuity-time'.";
- reference
- "RFC 2863: The Interfaces Group MIB - ifHCInOctets";
- }
-
- leaf in-unicast-pkts {
- type yang:counter64;
- status deprecated;
- description
- "The number of packets, delivered by this sub-layer to a
- higher (sub-)layer, that were not addressed to a
- multicast or broadcast address at this sub-layer.
- Discontinuities in the value of this counter can occur
- at re-initialization of the management system and at
- other times as indicated by the value of
- 'discontinuity-time'.";
- reference
- "RFC 2863: The Interfaces Group MIB - ifHCInUcastPkts";
- }
-
- leaf in-broadcast-pkts {
- type yang:counter64;
- status deprecated;
- description
- "The number of packets, delivered by this sub-layer to a
- higher (sub-)layer, that were addressed to a broadcast
- address at this sub-layer.
-
- Discontinuities in the value of this counter can occur
- at re-initialization of the management system and at
- other times as indicated by the value of
- 'discontinuity-time'.";
- reference
- "RFC 2863: The Interfaces Group MIB -
- ifHCInBroadcastPkts";
- }
-
- leaf in-multicast-pkts {
- type yang:counter64;
- status deprecated;
- description
- "The number of packets, delivered by this sub-layer to a
- higher (sub-)layer, that were addressed to a multicast
- address at this sub-layer. For a MAC-layer protocol,
- this includes both Group and Functional addresses.
-
- Discontinuities in the value of this counter can occur
- at re-initialization of the management system and at
- other times as indicated by the value of
- 'discontinuity-time'.";
- reference
- "RFC 2863: The Interfaces Group MIB -
- ifHCInMulticastPkts";
- }
-
- leaf in-discards {
- type yang:counter32;
- status deprecated;
-
- description
- "The number of inbound packets that were chosen to be
- discarded even though no errors had been detected to
- prevent their being deliverable to a higher-layer
- protocol. One possible reason for discarding such a
- packet could be to free up buffer space.
-
- Discontinuities in the value of this counter can occur
- at re-initialization of the management system and at
- other times as indicated by the value of
- 'discontinuity-time'.";
- reference
- "RFC 2863: The Interfaces Group MIB - ifInDiscards";
- }
-
- leaf in-errors {
- type yang:counter32;
- status deprecated;
- description
- "For packet-oriented interfaces, the number of inbound
- packets that contained errors preventing them from being
- deliverable to a higher-layer protocol. For character-
- oriented or fixed-length interfaces, the number of
- inbound transmission units that contained errors
- preventing them from being deliverable to a higher-layer
- protocol.
-
- Discontinuities in the value of this counter can occur
- at re-initialization of the management system and at
- other times as indicated by the value of
- 'discontinuity-time'.";
- reference
- "RFC 2863: The Interfaces Group MIB - ifInErrors";
- }
-
- leaf in-unknown-protos {
- type yang:counter32;
- status deprecated;
- description
- "For packet-oriented interfaces, the number of packets
- received via the interface that were discarded because
- of an unknown or unsupported protocol. For
- character-oriented or fixed-length interfaces that
- support protocol multiplexing, the number of
- transmission units received via the interface that were
- discarded because of an unknown or unsupported protocol.
- For any interface that does not support protocol
- multiplexing, this counter is not present.
- Discontinuities in the value of this counter can occur
- at re-initialization of the management system and at
- other times as indicated by the value of
- 'discontinuity-time'.";
- reference
- "RFC 2863: The Interfaces Group MIB - ifInUnknownProtos";
- }
-
- leaf out-octets {
- type yang:counter64;
- status deprecated;
- description
- "The total number of octets transmitted out of the
- interface, including framing characters.
-
- Discontinuities in the value of this counter can occur
- at re-initialization of the management system and at
- other times as indicated by the value of
- 'discontinuity-time'.";
- reference
- "RFC 2863: The Interfaces Group MIB - ifHCOutOctets";
- }
-
- leaf out-unicast-pkts {
- type yang:counter64;
- status deprecated;
- description
- "The total number of packets that higher-level protocols
- requested be transmitted and that were not addressed
- to a multicast or broadcast address at this sub-layer,
- including those that were discarded or not sent.
-
- Discontinuities in the value of this counter can occur
- at re-initialization of the management system and at
- other times as indicated by the value of
- 'discontinuity-time'.";
- reference
- "RFC 2863: The Interfaces Group MIB - ifHCOutUcastPkts";
- }
-
- leaf out-broadcast-pkts {
- type yang:counter64;
- status deprecated;
-
- description
- "The total number of packets that higher-level protocols
- requested be transmitted and that were addressed to a
- broadcast address at this sub-layer, including those
- that were discarded or not sent.
-
- Discontinuities in the value of this counter can occur
- at re-initialization of the management system and at
- other times as indicated by the value of
- 'discontinuity-time'.";
- reference
- "RFC 2863: The Interfaces Group MIB -
- ifHCOutBroadcastPkts";
- }
-
- leaf out-multicast-pkts {
- type yang:counter64;
- status deprecated;
- description
- "The total number of packets that higher-level protocols
- requested be transmitted and that were addressed to a
- multicast address at this sub-layer, including those
- that were discarded or not sent. For a MAC-layer
- protocol, this includes both Group and Functional
- addresses.
-
- Discontinuities in the value of this counter can occur
- at re-initialization of the management system and at
- other times as indicated by the value of
- 'discontinuity-time'.";
- reference
- "RFC 2863: The Interfaces Group MIB -
- ifHCOutMulticastPkts";
- }
-
- leaf out-discards {
- type yang:counter32;
- status deprecated;
- description
- "The number of outbound packets that were chosen to be
- discarded even though no errors had been detected to
- prevent their being transmitted. One possible reason
- for discarding such a packet could be to free up buffer
- space.
-
- Discontinuities in the value of this counter can occur
- at re-initialization of the management system and at
- other times as indicated by the value of
- 'discontinuity-time'.";
- reference
- "RFC 2863: The Interfaces Group MIB - ifOutDiscards";
- }
-
- leaf out-errors {
- type yang:counter32;
- status deprecated;
- description
- "For packet-oriented interfaces, the number of outbound
- packets that could not be transmitted because of errors.
- For character-oriented or fixed-length interfaces, the
- number of outbound transmission units that could not be
- transmitted because of errors.
-
- Discontinuities in the value of this counter can occur
- at re-initialization of the management system and at
- other times as indicated by the value of
- 'discontinuity-time'.";
- reference
- "RFC 2863: The Interfaces Group MIB - ifOutErrors";
- }
- }
- }
- }
-}
diff --git a/utils/sysrepo-plugins/yang/ietf/ietf-ip@2014-06-16.yang b/utils/sysrepo-plugins/yang/ietf/ietf-ip@2014-06-16.yang
deleted file mode 100644
index 79606cc07..000000000
--- a/utils/sysrepo-plugins/yang/ietf/ietf-ip@2014-06-16.yang
+++ /dev/null
@@ -1,742 +0,0 @@
-module ietf-ip {
-
- yang-version 1;
-
- namespace
- "urn:ietf:params:xml:ns:yang:ietf-ip";
-
- prefix ip;
-
- import ietf-interfaces {
- prefix if;
- }
- import ietf-inet-types {
- prefix inet;
- }
- import ietf-yang-types {
- prefix yang;
- }
-
- organization
- "IETF NETMOD (NETCONF Data Modeling Language) Working Group";
-
- contact
- "WG Web: <http://tools.ietf.org/wg/netmod/>
- WG List: <mailto:netmod@ietf.org>
-
- WG Chair: Thomas Nadeau
- <mailto:tnadeau@lucidvision.com>
-
- WG Chair: Juergen Schoenwaelder
- <mailto:j.schoenwaelder@jacobs-university.de>
-
- Editor: Martin Bjorklund
- <mailto:mbj@tail-f.com>";
-
- description
- "This module contains a collection of YANG definitions for
- configuring IP implementations.
-
- Copyright (c) 2014 IETF Trust and the persons identified as
- authors of the code. All rights reserved.
-
- Redistribution and use in source and binary forms, with or
- without modification, is permitted pursuant to, and subject
- to the license terms contained in, the Simplified BSD License
- set forth in Section 4.c of the IETF Trust's Legal Provisions
- Relating to IETF Documents
- (http://trustee.ietf.org/license-info).
-
- This version of this YANG module is part of RFC 7277; see
- the RFC itself for full legal notices.";
-
- revision "2014-06-16" {
- description "Initial revision.";
- reference
- "RFC 7277: A YANG Data Model for IP Management";
-
- }
-
-
- feature ipv4-non-contiguous-netmasks {
- description
- "Indicates support for configuring non-contiguous
- subnet masks.";
- }
-
- feature ipv6-privacy-autoconf {
- description
- "Indicates support for Privacy Extensions for Stateless Address
- Autoconfiguration in IPv6.";
- reference
- "RFC 4941: Privacy Extensions for Stateless Address
- Autoconfiguration in IPv6";
-
- }
-
- typedef ip-address-origin {
- type enumeration {
- enum "other" {
- value 0;
- description
- "None of the following.";
- }
- enum "static" {
- value 1;
- description
- "Indicates that the address has been statically
- configured - for example, using NETCONF or a Command Line
- Interface.";
- }
- enum "dhcp" {
- value 2;
- description
- "Indicates an address that has been assigned to this
- system by a DHCP server.";
- }
- enum "link-layer" {
- value 3;
- description
- "Indicates an address created by IPv6 stateless
- autoconfiguration that embeds a link-layer address in its
- interface identifier.";
- }
- enum "random" {
- value 4;
- description
- "Indicates an address chosen by the system at
-
- random, e.g., an IPv4 address within 169.254/16, an
- RFC 4941 temporary address, or an RFC 7217 semantically
- opaque address.";
- reference
- "RFC 4941: Privacy Extensions for Stateless Address
- Autoconfiguration in IPv6
- RFC 7217: A Method for Generating Semantically Opaque
- Interface Identifiers with IPv6 Stateless
- Address Autoconfiguration (SLAAC)";
-
- }
- }
- description
- "The origin of an address.";
- }
-
- typedef neighbor-origin {
- type enumeration {
- enum "other" {
- value 0;
- description
- "None of the following.";
- }
- enum "static" {
- value 1;
- description
- "Indicates that the mapping has been statically
- configured - for example, using NETCONF or a Command Line
- Interface.";
- }
- enum "dynamic" {
- value 2;
- description
- "Indicates that the mapping has been dynamically resolved
- using, e.g., IPv4 ARP or the IPv6 Neighbor Discovery
- protocol.";
- }
- }
- description
- "The origin of a neighbor entry.";
- }
-
- augment /if:interfaces/if:interface {
- description
- "Parameters for configuring IP on interfaces.
-
- If an interface is not capable of running IP, the server
- must not allow the client to configure these parameters.";
- container ipv4 {
- presence
- "Enables IPv4 unless the 'enabled' leaf
- (which defaults to 'true') is set to 'false'";
- description
- "Parameters for the IPv4 address family.";
- leaf enabled {
- type boolean;
- default 'true';
- description
- "Controls whether IPv4 is enabled or disabled on this
- interface. When IPv4 is enabled, this interface is
- connected to an IPv4 stack, and the interface can send
- and receive IPv4 packets.";
- }
-
- leaf forwarding {
- type boolean;
- default 'false';
- description
- "Controls IPv4 packet forwarding of datagrams received by,
- but not addressed to, this interface. IPv4 routers
- forward datagrams. IPv4 hosts do not (except those
- source-routed via the host).";
- }
-
- leaf mtu {
- type uint16 {
- range "68..max";
- }
- units "octets";
- description
- "The size, in octets, of the largest IPv4 packet that the
- interface will send and receive.
-
- The server may restrict the allowed values for this leaf,
- depending on the interface's type.
-
- If this leaf is not configured, the operationally used MTU
- depends on the interface's type.";
- reference
- "RFC 791: Internet Protocol";
-
- }
-
- list address {
- key "ip";
- description
- "The list of configured IPv4 addresses on the interface.";
- leaf ip {
- type inet:ipv4-address-no-zone;
- description
- "The IPv4 address on the interface.";
- }
-
- choice subnet {
- mandatory true;
- description
- "The subnet can be specified as a prefix-length, or,
- if the server supports non-contiguous netmasks, as
- a netmask.";
- leaf prefix-length {
- type uint8 {
- range "0..32";
- }
- description
- "The length of the subnet prefix.";
- }
- leaf netmask {
- if-feature ipv4-non-contiguous-netmasks;
- type yang:dotted-quad;
- description
- "The subnet specified as a netmask.";
- }
- } // choice subnet
- } // list address
-
- list neighbor {
- key "ip";
- description
- "A list of mappings from IPv4 addresses to
- link-layer addresses.
-
- Entries in this list are used as static entries in the
- ARP Cache.";
- reference
- "RFC 826: An Ethernet Address Resolution Protocol";
-
- leaf ip {
- type inet:ipv4-address-no-zone;
- description
- "The IPv4 address of the neighbor node.";
- }
-
- leaf link-layer-address {
- type yang:phys-address;
- mandatory true;
- description
- "The link-layer address of the neighbor node.";
- }
- } // list neighbor
- } // container ipv4
-
- container ipv6 {
- presence
- "Enables IPv6 unless the 'enabled' leaf
- (which defaults to 'true') is set to 'false'";
- description
- "Parameters for the IPv6 address family.";
- leaf enabled {
- type boolean;
- default 'true';
- description
- "Controls whether IPv6 is enabled or disabled on this
- interface. When IPv6 is enabled, this interface is
- connected to an IPv6 stack, and the interface can send
- and receive IPv6 packets.";
- }
-
- leaf forwarding {
- type boolean;
- default 'false';
- description
- "Controls IPv6 packet forwarding of datagrams received by,
- but not addressed to, this interface. IPv6 routers
- forward datagrams. IPv6 hosts do not (except those
- source-routed via the host).";
- reference
- "RFC 4861: Neighbor Discovery for IP version 6 (IPv6)
- Section 6.2.1, IsRouter";
-
- }
-
- leaf mtu {
- type uint32 {
- range "1280..max";
- }
- units "octets";
- description
- "The size, in octets, of the largest IPv6 packet that the
- interface will send and receive.
-
- The server may restrict the allowed values for this leaf,
- depending on the interface's type.
-
- If this leaf is not configured, the operationally used MTU
- depends on the interface's type.";
- reference
- "RFC 2460: Internet Protocol, Version 6 (IPv6) Specification
- Section 5";
-
- }
-
- list address {
- key "ip";
- description
- "The list of configured IPv6 addresses on the interface.";
- leaf ip {
- type inet:ipv6-address-no-zone;
- description
- "The IPv6 address on the interface.";
- }
-
- leaf prefix-length {
- type uint8 {
- range "0..128";
- }
- mandatory true;
- description
- "The length of the subnet prefix.";
- }
- } // list address
-
- list neighbor {
- key "ip";
- description
- "A list of mappings from IPv6 addresses to
- link-layer addresses.
-
- Entries in this list are used as static entries in the
- Neighbor Cache.";
- reference
- "RFC 4861: Neighbor Discovery for IP version 6 (IPv6)";
-
- leaf ip {
- type inet:ipv6-address-no-zone;
- description
- "The IPv6 address of the neighbor node.";
- }
-
- leaf link-layer-address {
- type yang:phys-address;
- mandatory true;
- description
- "The link-layer address of the neighbor node.";
- }
- } // list neighbor
-
- leaf dup-addr-detect-transmits {
- type uint32;
- default '1';
- description
- "The number of consecutive Neighbor Solicitation messages
- sent while performing Duplicate Address Detection on a
- tentative address. A value of zero indicates that
- Duplicate Address Detection is not performed on
- tentative addresses. A value of one indicates a single
- transmission with no follow-up retransmissions.";
- reference
- "RFC 4862: IPv6 Stateless Address Autoconfiguration";
-
- }
-
- container autoconf {
- description
- "Parameters to control the autoconfiguration of IPv6
- addresses, as described in RFC 4862.";
- reference
- "RFC 4862: IPv6 Stateless Address Autoconfiguration";
-
- leaf create-global-addresses {
- type boolean;
- default 'true';
- description
- "If enabled, the host creates global addresses as
- described in RFC 4862.";
- reference
- "RFC 4862: IPv6 Stateless Address Autoconfiguration
- Section 5.5";
-
- }
-
- leaf create-temporary-addresses {
- if-feature ipv6-privacy-autoconf;
- type boolean;
- default 'false';
- description
- "If enabled, the host creates temporary addresses as
- described in RFC 4941.";
- reference
- "RFC 4941: Privacy Extensions for Stateless Address
- Autoconfiguration in IPv6";
-
- }
-
- leaf temporary-valid-lifetime {
- if-feature ipv6-privacy-autoconf;
- type uint32;
- units "seconds";
- default '604800';
- description
- "The time period during which the temporary address
- is valid.";
- reference
- "RFC 4941: Privacy Extensions for Stateless Address
- Autoconfiguration in IPv6
- - TEMP_VALID_LIFETIME";
-
- }
-
- leaf temporary-preferred-lifetime {
- if-feature ipv6-privacy-autoconf;
- type uint32;
- units "seconds";
- default '86400';
- description
- "The time period during which the temporary address is
- preferred.";
- reference
- "RFC 4941: Privacy Extensions for Stateless Address
- Autoconfiguration in IPv6
- - TEMP_PREFERRED_LIFETIME";
-
- }
- } // container autoconf
- } // container ipv6
- }
-
- augment /if:interfaces-state/if:interface {
- description
- "Data nodes for the operational state of IP on interfaces.";
- container ipv4 {
- presence
- "Present if IPv4 is enabled on this interface";
- config false;
- description
- "Interface-specific parameters for the IPv4 address family.";
- leaf forwarding {
- type boolean;
- description
- "Indicates whether IPv4 packet forwarding is enabled or
- disabled on this interface.";
- }
-
- leaf mtu {
- type uint16 {
- range "68..max";
- }
- units "octets";
- description
- "The size, in octets, of the largest IPv4 packet that the
- interface will send and receive.";
- reference
- "RFC 791: Internet Protocol";
-
- }
-
- list address {
- key "ip";
- description
- "The list of IPv4 addresses on the interface.";
- leaf ip {
- type inet:ipv4-address-no-zone;
- description
- "The IPv4 address on the interface.";
- }
-
- choice subnet {
- description
- "The subnet can be specified as a prefix-length, or,
- if the server supports non-contiguous netmasks, as
- a netmask.";
- leaf prefix-length {
- type uint8 {
- range "0..32";
- }
- description
- "The length of the subnet prefix.";
- }
- leaf netmask {
- if-feature ipv4-non-contiguous-netmasks;
- type yang:dotted-quad;
- description
- "The subnet specified as a netmask.";
- }
- } // choice subnet
-
- leaf origin {
- type ip-address-origin;
- description
- "The origin of this address.";
- }
- } // list address
-
- list neighbor {
- key "ip";
- description
- "A list of mappings from IPv4 addresses to
- link-layer addresses.
-
- This list represents the ARP Cache.";
- reference
- "RFC 826: An Ethernet Address Resolution Protocol";
-
- leaf ip {
- type inet:ipv4-address-no-zone;
- description
- "The IPv4 address of the neighbor node.";
- }
-
- leaf link-layer-address {
- type yang:phys-address;
- description
- "The link-layer address of the neighbor node.";
- }
-
- leaf origin {
- type neighbor-origin;
- description
- "The origin of this neighbor entry.";
- }
- } // list neighbor
- } // container ipv4
-
- container ipv6 {
- presence
- "Present if IPv6 is enabled on this interface";
- config false;
- description
- "Parameters for the IPv6 address family.";
- leaf forwarding {
- type boolean;
- default 'false';
- description
- "Indicates whether IPv6 packet forwarding is enabled or
- disabled on this interface.";
- reference
- "RFC 4861: Neighbor Discovery for IP version 6 (IPv6)
- Section 6.2.1, IsRouter";
-
- }
-
- leaf mtu {
- type uint32 {
- range "1280..max";
- }
- units "octets";
- description
- "The size, in octets, of the largest IPv6 packet that the
- interface will send and receive.";
- reference
- "RFC 2460: Internet Protocol, Version 6 (IPv6) Specification
- Section 5";
-
- }
-
- list address {
- key "ip";
- description
- "The list of IPv6 addresses on the interface.";
- leaf ip {
- type inet:ipv6-address-no-zone;
- description
- "The IPv6 address on the interface.";
- }
-
- leaf prefix-length {
- type uint8 {
- range "0..128";
- }
- mandatory true;
- description
- "The length of the subnet prefix.";
- }
-
- leaf origin {
- type ip-address-origin;
- description
- "The origin of this address.";
- }
-
- leaf status {
- type enumeration {
- enum "preferred" {
- value 0;
- description
- "This is a valid address that can appear as the
- destination or source address of a packet.";
- }
- enum "deprecated" {
- value 1;
- description
- "This is a valid but deprecated address that should
- no longer be used as a source address in new
- communications, but packets addressed to such an
- address are processed as expected.";
- }
- enum "invalid" {
- value 2;
- description
- "This isn't a valid address, and it shouldn't appear
- as the destination or source address of a packet.";
- }
- enum "inaccessible" {
- value 3;
- description
- "The address is not accessible because the interface
- to which this address is assigned is not
- operational.";
- }
- enum "unknown" {
- value 4;
- description
- "The status cannot be determined for some reason.";
- }
- enum "tentative" {
- value 5;
- description
- "The uniqueness of the address on the link is being
- verified. Addresses in this state should not be
- used for general communication and should only be
- used to determine the uniqueness of the address.";
- }
- enum "duplicate" {
- value 6;
- description
- "The address has been determined to be non-unique on
- the link and so must not be used.";
- }
- enum "optimistic" {
- value 7;
- description
- "The address is available for use, subject to
- restrictions, while its uniqueness on a link is
- being verified.";
- }
- }
- description
- "The status of an address. Most of the states correspond
- to states from the IPv6 Stateless Address
- Autoconfiguration protocol.";
- reference
- "RFC 4293: Management Information Base for the
- Internet Protocol (IP)
- - IpAddressStatusTC
- RFC 4862: IPv6 Stateless Address Autoconfiguration";
-
- }
- } // list address
-
- list neighbor {
- key "ip";
- description
- "A list of mappings from IPv6 addresses to
- link-layer addresses.
-
- This list represents the Neighbor Cache.";
- reference
- "RFC 4861: Neighbor Discovery for IP version 6 (IPv6)";
-
- leaf ip {
- type inet:ipv6-address-no-zone;
- description
- "The IPv6 address of the neighbor node.";
- }
-
- leaf link-layer-address {
- type yang:phys-address;
- description
- "The link-layer address of the neighbor node.";
- }
-
- leaf origin {
- type neighbor-origin;
- description
- "The origin of this neighbor entry.";
- }
-
- leaf is-router {
- type empty;
- description
- "Indicates that the neighbor node acts as a router.";
- }
-
- leaf state {
- type enumeration {
- enum "incomplete" {
- value 0;
- description
- "Address resolution is in progress, and the link-layer
- address of the neighbor has not yet been
- determined.";
- }
- enum "reachable" {
- value 1;
- description
- "Roughly speaking, the neighbor is known to have been
- reachable recently (within tens of seconds ago).";
- }
- enum "stale" {
- value 2;
- description
- "The neighbor is no longer known to be reachable, but
- until traffic is sent to the neighbor no attempt
- should be made to verify its reachability.";
- }
- enum "delay" {
- value 3;
- description
- "The neighbor is no longer known to be reachable, and
- traffic has recently been sent to the neighbor.
- Rather than probe the neighbor immediately, however,
- delay sending probes for a short while in order to
- give upper-layer protocols a chance to provide
- reachability confirmation.";
- }
- enum "probe" {
- value 4;
- description
- "The neighbor is no longer known to be reachable, and
- unicast Neighbor Solicitation probes are being sent
- to verify reachability.";
- }
- }
- description
- "The Neighbor Unreachability Detection state of this
- entry.";
- reference
- "RFC 4861: Neighbor Discovery for IP version 6 (IPv6)
- Section 7.3.2";
-
- }
- } // list neighbor
- } // container ipv6
- }
- } // module ietf-ip
diff --git a/utils/sysrepo-plugins/yang/ietf/ietf-yang-types@2013-07-15.yang b/utils/sysrepo-plugins/yang/ietf/ietf-yang-types@2013-07-15.yang
deleted file mode 100644
index ee58fa3ab..000000000
--- a/utils/sysrepo-plugins/yang/ietf/ietf-yang-types@2013-07-15.yang
+++ /dev/null
@@ -1,474 +0,0 @@
-module ietf-yang-types {
-
- namespace "urn:ietf:params:xml:ns:yang:ietf-yang-types";
- prefix "yang";
-
- organization
- "IETF NETMOD (NETCONF Data Modeling Language) Working Group";
-
- contact
- "WG Web: <http://tools.ietf.org/wg/netmod/>
- WG List: <mailto:netmod@ietf.org>
-
- WG Chair: David Kessens
- <mailto:david.kessens@nsn.com>
-
- WG Chair: Juergen Schoenwaelder
- <mailto:j.schoenwaelder@jacobs-university.de>
-
- Editor: Juergen Schoenwaelder
- <mailto:j.schoenwaelder@jacobs-university.de>";
-
- description
- "This module contains a collection of generally useful derived
- YANG data types.
-
- Copyright (c) 2013 IETF Trust and the persons identified as
- authors of the code. All rights reserved.
-
- Redistribution and use in source and binary forms, with or
- without modification, is permitted pursuant to, and subject
- to the license terms contained in, the Simplified BSD License
- set forth in Section 4.c of the IETF Trust's Legal Provisions
- Relating to IETF Documents
- (http://trustee.ietf.org/license-info).
-
- This version of this YANG module is part of RFC 6991; see
- the RFC itself for full legal notices.";
-
- revision 2013-07-15 {
- description
- "This revision adds the following new data types:
- - yang-identifier
- - hex-string
- - uuid
- - dotted-quad";
- reference
- "RFC 6991: Common YANG Data Types";
- }
-
- revision 2010-09-24 {
- description
- "Initial revision.";
- reference
- "RFC 6021: Common YANG Data Types";
- }
-
- /*** collection of counter and gauge types ***/
-
- typedef counter32 {
- type uint32;
- description
- "The counter32 type represents a non-negative integer
- that monotonically increases until it reaches a
- maximum value of 2^32-1 (4294967295 decimal), when it
- wraps around and starts increasing again from zero.
-
- Counters have no defined 'initial' value, and thus, a
- single value of a counter has (in general) no information
- content. Discontinuities in the monotonically increasing
- value normally occur at re-initialization of the
- management system, and at other times as specified in the
- description of a schema node using this type. If such
- other times can occur, for example, the creation of
- a schema node of type counter32 at times other than
- re-initialization, then a corresponding schema node
- should be defined, with an appropriate type, to indicate
- the last discontinuity.
-
- The counter32 type should not be used for configuration
- schema nodes. A default statement SHOULD NOT be used in
- combination with the type counter32.
-
- In the value set and its semantics, this type is equivalent
- to the Counter32 type of the SMIv2.";
- reference
- "RFC 2578: Structure of Management Information Version 2
- (SMIv2)";
- }
-
- typedef zero-based-counter32 {
- type yang:counter32;
- default "0";
- description
- "The zero-based-counter32 type represents a counter32
- that has the defined 'initial' value zero.
-
- A schema node of this type will be set to zero (0) on creation
- and will thereafter increase monotonically until it reaches
- a maximum value of 2^32-1 (4294967295 decimal), when it
- wraps around and starts increasing again from zero.
-
- Provided that an application discovers a new schema node
- of this type within the minimum time to wrap, it can use the
- 'initial' value as a delta. It is important for a management
- station to be aware of this minimum time and the actual time
- between polls, and to discard data if the actual time is too
- long or there is no defined minimum time.
-
- In the value set and its semantics, this type is equivalent
- to the ZeroBasedCounter32 textual convention of the SMIv2.";
- reference
- "RFC 4502: Remote Network Monitoring Management Information
- Base Version 2";
- }
-
- typedef counter64 {
- type uint64;
- description
- "The counter64 type represents a non-negative integer
- that monotonically increases until it reaches a
- maximum value of 2^64-1 (18446744073709551615 decimal),
- when it wraps around and starts increasing again from zero.
-
- Counters have no defined 'initial' value, and thus, a
- single value of a counter has (in general) no information
- content. Discontinuities in the monotonically increasing
- value normally occur at re-initialization of the
- management system, and at other times as specified in the
- description of a schema node using this type. If such
- other times can occur, for example, the creation of
- a schema node of type counter64 at times other than
- re-initialization, then a corresponding schema node
- should be defined, with an appropriate type, to indicate
- the last discontinuity.
-
- The counter64 type should not be used for configuration
- schema nodes. A default statement SHOULD NOT be used in
- combination with the type counter64.
-
- In the value set and its semantics, this type is equivalent
- to the Counter64 type of the SMIv2.";
- reference
- "RFC 2578: Structure of Management Information Version 2
- (SMIv2)";
- }
-
- typedef zero-based-counter64 {
- type yang:counter64;
- default "0";
- description
- "The zero-based-counter64 type represents a counter64 that
- has the defined 'initial' value zero.
-
- A schema node of this type will be set to zero (0) on creation
- and will thereafter increase monotonically until it reaches
- a maximum value of 2^64-1 (18446744073709551615 decimal),
- when it wraps around and starts increasing again from zero.
-
- Provided that an application discovers a new schema node
- of this type within the minimum time to wrap, it can use the
- 'initial' value as a delta. It is important for a management
- station to be aware of this minimum time and the actual time
- between polls, and to discard data if the actual time is too
- long or there is no defined minimum time.
-
- In the value set and its semantics, this type is equivalent
- to the ZeroBasedCounter64 textual convention of the SMIv2.";
- reference
- "RFC 2856: Textual Conventions for Additional High Capacity
- Data Types";
- }
-
- typedef gauge32 {
- type uint32;
- description
- "The gauge32 type represents a non-negative integer, which
- may increase or decrease, but shall never exceed a maximum
- value, nor fall below a minimum value. The maximum value
- cannot be greater than 2^32-1 (4294967295 decimal), and
- the minimum value cannot be smaller than 0. The value of
- a gauge32 has its maximum value whenever the information
- being modeled is greater than or equal to its maximum
- value, and has its minimum value whenever the information
- being modeled is smaller than or equal to its minimum value.
- If the information being modeled subsequently decreases
- below (increases above) the maximum (minimum) value, the
- gauge32 also decreases (increases).
-
- In the value set and its semantics, this type is equivalent
- to the Gauge32 type of the SMIv2.";
- reference
- "RFC 2578: Structure of Management Information Version 2
- (SMIv2)";
- }
-
- typedef gauge64 {
- type uint64;
- description
- "The gauge64 type represents a non-negative integer, which
- may increase or decrease, but shall never exceed a maximum
- value, nor fall below a minimum value. The maximum value
- cannot be greater than 2^64-1 (18446744073709551615), and
- the minimum value cannot be smaller than 0. The value of
- a gauge64 has its maximum value whenever the information
- being modeled is greater than or equal to its maximum
- value, and has its minimum value whenever the information
- being modeled is smaller than or equal to its minimum value.
- If the information being modeled subsequently decreases
- below (increases above) the maximum (minimum) value, the
- gauge64 also decreases (increases).
-
- In the value set and its semantics, this type is equivalent
- to the CounterBasedGauge64 SMIv2 textual convention defined
- in RFC 2856";
- reference
- "RFC 2856: Textual Conventions for Additional High Capacity
- Data Types";
- }
-
- /*** collection of identifier-related types ***/
-
- typedef object-identifier {
- type string {
- pattern '(([0-1](\.[1-3]?[0-9]))|(2\.(0|([1-9]\d*))))'
- + '(\.(0|([1-9]\d*)))*';
- }
- description
- "The object-identifier type represents administratively
- assigned names in a registration-hierarchical-name tree.
-
- Values of this type are denoted as a sequence of numerical
- non-negative sub-identifier values. Each sub-identifier
- value MUST NOT exceed 2^32-1 (4294967295). Sub-identifiers
- are separated by single dots and without any intermediate
- whitespace.
-
- The ASN.1 standard restricts the value space of the first
- sub-identifier to 0, 1, or 2. Furthermore, the value space
- of the second sub-identifier is restricted to the range
- 0 to 39 if the first sub-identifier is 0 or 1. Finally,
- the ASN.1 standard requires that an object identifier
- has always at least two sub-identifiers. The pattern
- captures these restrictions.
-
- Although the number of sub-identifiers is not limited,
- module designers should realize that there may be
- implementations that stick with the SMIv2 limit of 128
- sub-identifiers.
-
- This type is a superset of the SMIv2 OBJECT IDENTIFIER type
- since it is not restricted to 128 sub-identifiers. Hence,
- this type SHOULD NOT be used to represent the SMIv2 OBJECT
- IDENTIFIER type; the object-identifier-128 type SHOULD be
- used instead.";
- reference
- "ISO9834-1: Information technology -- Open Systems
- Interconnection -- Procedures for the operation of OSI
- Registration Authorities: General procedures and top
- arcs of the ASN.1 Object Identifier tree";
- }
-
- typedef object-identifier-128 {
- type object-identifier {
- pattern '\d*(\.\d*){1,127}';
- }
- description
- "This type represents object-identifiers restricted to 128
- sub-identifiers.
-
- In the value set and its semantics, this type is equivalent
- to the OBJECT IDENTIFIER type of the SMIv2.";
- reference
- "RFC 2578: Structure of Management Information Version 2
- (SMIv2)";
- }
-
- typedef yang-identifier {
- type string {
- length "1..max";
- pattern '[a-zA-Z_][a-zA-Z0-9\-_.]*';
- pattern '.|..|[^xX].*|.[^mM].*|..[^lL].*';
- }
- description
- "A YANG identifier string as defined by the 'identifier'
- rule in Section 12 of RFC 6020. An identifier must
- start with an alphabetic character or an underscore
- followed by an arbitrary sequence of alphabetic or
- numeric characters, underscores, hyphens, or dots.
-
- A YANG identifier MUST NOT start with any possible
- combination of the lowercase or uppercase character
- sequence 'xml'.";
- reference
- "RFC 6020: YANG - A Data Modeling Language for the Network
- Configuration Protocol (NETCONF)";
- }
-
- /*** collection of types related to date and time***/
-
- typedef date-and-time {
- type string {
- pattern '\d{4}-\d{2}-\d{2}T\d{2}:\d{2}:\d{2}(\.\d+)?'
- + '(Z|[\+\-]\d{2}:\d{2})';
- }
- description
- "The date-and-time type is a profile of the ISO 8601
- standard for representation of dates and times using the
- Gregorian calendar. The profile is defined by the
- date-time production in Section 5.6 of RFC 3339.
-
- The date-and-time type is compatible with the dateTime XML
- schema type with the following notable exceptions:
-
- (a) The date-and-time type does not allow negative years.
-
- (b) The date-and-time time-offset -00:00 indicates an unknown
- time zone (see RFC 3339) while -00:00 and +00:00 and Z
- all represent the same time zone in dateTime.
-
- (c) The canonical format (see below) of data-and-time values
- differs from the canonical format used by the dateTime XML
- schema type, which requires all times to be in UTC using
- the time-offset 'Z'.
-
- This type is not equivalent to the DateAndTime textual
- convention of the SMIv2 since RFC 3339 uses a different
- separator between full-date and full-time and provides
- higher resolution of time-secfrac.
-
- The canonical format for date-and-time values with a known time
- zone uses a numeric time zone offset that is calculated using
- the device's configured known offset to UTC time. A change of
- the device's offset to UTC time will cause date-and-time values
- to change accordingly. Such changes might happen periodically
- in case a server follows automatically daylight saving time
- (DST) time zone offset changes. The canonical format for
- date-and-time values with an unknown time zone (usually
- referring to the notion of local time) uses the time-offset
- -00:00.";
- reference
- "RFC 3339: Date and Time on the Internet: Timestamps
- RFC 2579: Textual Conventions for SMIv2
- XSD-TYPES: XML Schema Part 2: Datatypes Second Edition";
- }
-
- typedef timeticks {
- type uint32;
- description
- "The timeticks type represents a non-negative integer that
- represents the time, modulo 2^32 (4294967296 decimal), in
- hundredths of a second between two epochs. When a schema
- node is defined that uses this type, the description of
- the schema node identifies both of the reference epochs.
-
- In the value set and its semantics, this type is equivalent
- to the TimeTicks type of the SMIv2.";
- reference
- "RFC 2578: Structure of Management Information Version 2
- (SMIv2)";
- }
-
- typedef timestamp {
- type yang:timeticks;
- description
- "The timestamp type represents the value of an associated
- timeticks schema node at which a specific occurrence
- happened. The specific occurrence must be defined in the
- description of any schema node defined using this type. When
- the specific occurrence occurred prior to the last time the
- associated timeticks attribute was zero, then the timestamp
- value is zero. Note that this requires all timestamp values
- to be reset to zero when the value of the associated timeticks
- attribute reaches 497+ days and wraps around to zero.
-
- The associated timeticks schema node must be specified
- in the description of any schema node using this type.
-
- In the value set and its semantics, this type is equivalent
- to the TimeStamp textual convention of the SMIv2.";
- reference
- "RFC 2579: Textual Conventions for SMIv2";
- }
-
- /*** collection of generic address types ***/
-
- typedef phys-address {
- type string {
- pattern '([0-9a-fA-F]{2}(:[0-9a-fA-F]{2})*)?';
- }
-
- description
- "Represents media- or physical-level addresses represented
- as a sequence octets, each octet represented by two hexadecimal
- numbers. Octets are separated by colons. The canonical
- representation uses lowercase characters.
-
- In the value set and its semantics, this type is equivalent
- to the PhysAddress textual convention of the SMIv2.";
- reference
- "RFC 2579: Textual Conventions for SMIv2";
- }
-
- typedef mac-address {
- type string {
- pattern '[0-9a-fA-F]{2}(:[0-9a-fA-F]{2}){5}';
- }
- description
- "The mac-address type represents an IEEE 802 MAC address.
- The canonical representation uses lowercase characters.
-
- In the value set and its semantics, this type is equivalent
- to the MacAddress textual convention of the SMIv2.";
- reference
- "IEEE 802: IEEE Standard for Local and Metropolitan Area
- Networks: Overview and Architecture
- RFC 2579: Textual Conventions for SMIv2";
- }
-
- /*** collection of XML-specific types ***/
-
- typedef xpath1.0 {
- type string;
- description
- "This type represents an XPATH 1.0 expression.
-
- When a schema node is defined that uses this type, the
- description of the schema node MUST specify the XPath
- context in which the XPath expression is evaluated.";
- reference
- "XPATH: XML Path Language (XPath) Version 1.0";
- }
-
- /*** collection of string types ***/
-
- typedef hex-string {
- type string {
- pattern '([0-9a-fA-F]{2}(:[0-9a-fA-F]{2})*)?';
- }
- description
- "A hexadecimal string with octets represented as hex digits
- separated by colons. The canonical representation uses
- lowercase characters.";
- }
-
- typedef uuid {
- type string {
- pattern '[0-9a-fA-F]{8}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-'
- + '[0-9a-fA-F]{4}-[0-9a-fA-F]{12}';
- }
- description
- "A Universally Unique IDentifier in the string representation
- defined in RFC 4122. The canonical representation uses
- lowercase characters.
-
- The following is an example of a UUID in string representation:
- f81d4fae-7dec-11d0-a765-00a0c91e6bf6
- ";
- reference
- "RFC 4122: A Universally Unique IDentifier (UUID) URN
- Namespace";
- }
-
- typedef dotted-quad {
- type string {
- pattern
- '(([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}'
- + '([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])';
- }
- description
- "An unsigned 32-bit number expressed in the dotted-quad
- notation, i.e., four octets written as decimal numbers
- and separated with the '.' (full stop) character.";
- }
-}