Add PPPoE Plugin

Supports 64K PPPoE sessions

This plugin adds three graph nodes:
1) pppoe-input for PPPoE decapsulation
2) pppoe-encap for PPPoE encapsulation
3) pppoe-tap-dispatch for control plane process

Below is the configuration to make PPPoE CP and DP work:
vim /etc/vpp/startup.conf
tuntap {
  enable
  ethernet
  name newtap
}

create pppoe tap tap-if-index 1

//Configure it after a subscriber's PPPoE discovery and PPP link establishment succeeds:
create pppoe session client-ip 100.1.2.1 session-id 1 client-mac 00:11:01:00:00:01

show pppoe fib
show pppoe session

Change-Id: I73e724b6bf7c3e4181a9914c5752da1fa72d7e60
Signed-off-by: Hongjun Ni <hongjun.ni@intel.com>

3 files changed, 710 insertions, 0 deletions

diff --git a/test/test_pppoe.py b/test/test_pppoe.py
new file mode 100644
index 00000000..0baf4546
--- /dev/null
+++ b/test/test_pppoe.py
@@ -0,0 +1,605 @@
+#!/usr/bin/env python
+
+import unittest
+from logging import *
+
+from framework import VppTestCase, VppTestRunner
+from vpp_ip_route import VppIpRoute, VppRoutePath
+from vpp_pppoe_interface import VppPppoeInterface, VppPppoe6Interface
+from vpp_papi_provider import L2_VTR_OP
+
+from scapy.packet import Raw
+from scapy.layers.l2 import Ether
+from scapy.layers.ppp import PPPoE, PPPoED, PPP
+from scapy.layers.inet import IP, UDP
+from scapy.layers.inet6 import IPv6
+from scapy.volatile import RandMAC, RandIP
+
+from util import ppp, ppc, mactobinary
+import socket
+
+
+class TestPPPoE(VppTestCase):
+    """ PPPoE Test Case """
+
+    @classmethod
+    def setUpClass(cls):
+        super(TestPPPoE, cls).setUpClass()
+
+        cls.session_id = 1
+        cls.dst_ip = "100.1.1.100"
+        cls.dst_ipn = socket.inet_pton(socket.AF_INET, cls.dst_ip)
+
+    def setUp(self):
+        super(TestPPPoE, self).setUp()
+
+        # create 2 pg interfaces
+        self.create_pg_interfaces(range(3))
+
+        for i in self.pg_interfaces:
+            i.admin_up()
+            i.config_ip4()
+            i.resolve_arp()
+
+    def tearDown(self):
+        super(TestPPPoE, self).tearDown()
+
+        self.logger.info(self.vapi.cli("show int"))
+        self.logger.info(self.vapi.cli("show pppoe fib"))
+        self.logger.info(self.vapi.cli("show pppoe session"))
+        self.logger.info(self.vapi.cli("show ip fib"))
+        self.logger.info(self.vapi.cli("show trace"))
+
+        for i in self.pg_interfaces:
+            i.unconfig_ip4()
+            i.admin_down()
+
+    def create_stream_pppoe_discovery(self, src_if, dst_if,
+                                      client_mac, count=1):
+        packets = []
+        for i in range(count):
+            # create packet info stored in the test case instance
+            info = self.create_packet_info(src_if, dst_if)
+            # convert the info into packet payload
+            payload = self.info_to_payload(info)
+            # create the packet itself
+            p = (Ether(dst=src_if.local_mac, src=client_mac) /
+                 PPPoED(sessionid=0) /
+                 Raw(payload))
+            # store a copy of the packet in the packet info
+            info.data = p.copy()
+            # append the packet to the list
+            packets.append(p)
+
+        # return the created packet list
+        return packets
+
+    def create_stream_pppoe_lcp(self, src_if, dst_if,
+                                client_mac, session_id, count=1):
+        packets = []
+        for i in range(count):
+            # create packet info stored in the test case instance
+            info = self.create_packet_info(src_if, dst_if)
+            # convert the info into packet payload
+            payload = self.info_to_payload(info)
+            # create the packet itself
+            p = (Ether(dst=src_if.local_mac, src=client_mac) /
+                 PPPoE(sessionid=session_id) /
+                 PPP(proto=0xc021) /
+                 Raw(payload))
+            # store a copy of the packet in the packet info
+            info.data = p.copy()
+            # append the packet to the list
+            packets.append(p)
+
+        # return the created packet list
+        return packets
+
+    def create_stream_pppoe_ip4(self, src_if, dst_if,
+                                client_mac, session_id, client_ip, count=1):
+        packets = []
+        for i in range(count):
+            # create packet info stored in the test case instance
+            info = self.create_packet_info(src_if, dst_if)
+            # convert the info into packet payload
+            payload = self.info_to_payload(info)
+            # create the packet itself
+            p = (Ether(dst=src_if.local_mac, src=client_mac) /
+                 PPPoE(sessionid=session_id) /
+                 PPP(proto=0x0021) /
+                 IP(src=client_ip, dst=self.dst_ip) /
+                 Raw(payload))
+            # store a copy of the packet in the packet info
+            info.data = p.copy()
+            # append the packet to the list
+            packets.append(p)
+
+        # return the created packet list
+        return packets
+
+    def create_stream_ip4(self, src_if, dst_if, client_ip, dst_ip, count=1):
+        pkts = []
+        for i in range(count):
+            # create packet info stored in the test case instance
+            info = self.create_packet_info(src_if, dst_if)
+            # convert the info into packet payload
+            payload = self.info_to_payload(info)
+            # create the packet itself
+            p = (Ether(dst=src_if.local_mac, src=src_if.remote_mac) /
+                 IP(src=dst_ip, dst=client_ip) /
+                 Raw(payload))
+            # store a copy of the packet in the packet info
+            info.data = p.copy()
+            # append the packet to the list
+            pkts.append(p)
+
+        # return the created packet list
+        return pkts
+
+    def verify_decapped_pppoe(self, src_if, capture, sent):
+        self.assertEqual(len(capture), len(sent))
+
+        for i in range(len(capture)):
+            try:
+                tx = sent[i]
+                rx = capture[i]
+
+                tx_ip = tx[IP]
+                rx_ip = rx[IP]
+
+                self.assertEqual(rx_ip.src, tx_ip.src)
+                self.assertEqual(rx_ip.dst, tx_ip.dst)
+
+            except:
+                self.logger.error(ppp("Rx:", rx))
+                self.logger.error(ppp("Tx:", tx))
+                raise
+
+    def verify_encaped_pppoe(self, src_if, capture, sent, session_id):
+
+        self.assertEqual(len(capture), len(sent))
+
+        for i in range(len(capture)):
+            try:
+                tx = sent[i]
+                rx = capture[i]
+
+                tx_ip = tx[IP]
+                rx_ip = rx[IP]
+
+                self.assertEqual(rx_ip.src, tx_ip.src)
+                self.assertEqual(rx_ip.dst, tx_ip.dst)
+
+                rx_pppoe = rx[PPPoE]
+
+                self.assertEqual(rx_pppoe.sessionid, session_id)
+
+            except:
+                self.logger.error(ppp("Rx:", rx))
+                self.logger.error(ppp("Tx:", tx))
+                raise
+
+    def test_PPPoE_Decap(self):
+        """ PPPoE Decap Test """
+
+        self.vapi.cli("clear trace")
+
+        #
+        # Add a route that resolves the server's destination
+        #
+        route_sever_dst = VppIpRoute(self, "100.1.1.100", 32,
+                                     [VppRoutePath(self.pg1.remote_ip4,
+                                                   self.pg1.sw_if_index)])
+        route_sever_dst.add_vpp_config()
+
+        # Send PPPoE Discovery
+        tx0 = self.create_stream_pppoe_discovery(self.pg0, self.pg1,
+                                                 self.pg0.remote_mac)
+        self.pg0.add_stream(tx0)
+        self.pg_start()
+
+        # Send PPPoE PPP LCP
+        tx1 = self.create_stream_pppoe_lcp(self.pg0, self.pg1,
+                                           self.pg0.remote_mac,
+                                           self.session_id)
+        self.pg0.add_stream(tx1)
+        self.pg_start()
+
+        # Create PPPoE session
+        pppoe_if = VppPppoeInterface(self,
+                                     self.pg0.remote_ip4,
+                                     self.pg0.remote_mac,
+                                     self.session_id)
+        pppoe_if.add_vpp_config()
+
+        #
+        # Send tunneled packets that match the created tunnel and
+        # are decapped and forwarded
+        #
+        tx2 = self.create_stream_pppoe_ip4(self.pg0, self.pg1,
+                                           self.pg0.remote_mac,
+                                           self.session_id,
+                                           self.pg0.remote_ip4)
+        self.pg0.add_stream(tx2)
+
+        self.pg_enable_capture(self.pg_interfaces)
+        self.pg_start()
+
+        rx2 = self.pg1.get_capture(len(tx2))
+        self.verify_decapped_pppoe(self.pg0, rx2, tx2)
+
+        self.logger.info(self.vapi.cli("show pppoe fib"))
+        self.logger.info(self.vapi.cli("show pppoe session"))
+        self.logger.info(self.vapi.cli("show ip fib"))
+
+        #
+        # test case cleanup
+        #
+
+        # Delete PPPoE session
+        pppoe_if.remove_vpp_config()
+
+        # Delete a route that resolves the server's destination
+        route_sever_dst.remove_vpp_config()
+
+    def test_PPPoE_Encap(self):
+        """ PPPoE Encap Test """
+
+        self.vapi.cli("clear trace")
+
+        #
+        # Add a route that resolves the server's destination
+        #
+        route_sever_dst = VppIpRoute(self, "100.1.1.100", 32,
+                                     [VppRoutePath(self.pg1.remote_ip4,
+                                                   self.pg1.sw_if_index)])
+        route_sever_dst.add_vpp_config()
+
+        # Send PPPoE Discovery
+        tx0 = self.create_stream_pppoe_discovery(self.pg0, self.pg1,
+                                                 self.pg0.remote_mac)
+        self.pg0.add_stream(tx0)
+        self.pg_start()
+
+        # Send PPPoE PPP LCP
+        tx1 = self.create_stream_pppoe_lcp(self.pg0, self.pg1,
+                                           self.pg0.remote_mac,
+                                           self.session_id)
+        self.pg0.add_stream(tx1)
+        self.pg_start()
+
+        # Create PPPoE session
+        pppoe_if = VppPppoeInterface(self,
+                                     self.pg0.remote_ip4,
+                                     self.pg0.remote_mac,
+                                     self.session_id)
+        pppoe_if.add_vpp_config()
+
+        #
+        # Send a packet stream that is routed into the session
+        #  - packets are PPPoE encapped
+        #
+        self.vapi.cli("clear trace")
+        tx2 = self.create_stream_ip4(self.pg1, self.pg0,
+                                     self.pg0.remote_ip4, self.dst_ip)
+        self.pg1.add_stream(tx2)
+
+        self.pg_enable_capture(self.pg_interfaces)
+        self.pg_start()
+
+        rx2 = self.pg0.get_capture(len(tx2))
+        self.verify_encaped_pppoe(self.pg1, rx2, tx2, self.session_id)
+
+        self.logger.info(self.vapi.cli("show pppoe fib"))
+        self.logger.info(self.vapi.cli("show pppoe session"))
+        self.logger.info(self.vapi.cli("show ip fib"))
+
+        #
+        # test case cleanup
+        #
+
+        # Delete PPPoE session
+        pppoe_if.remove_vpp_config()
+
+        # Delete a route that resolves the server's destination
+        route_sever_dst.remove_vpp_config()
+
+    def test_PPPoE_Add_Twice(self):
+        """ PPPoE Add Same Session Twice Test """
+
+        self.vapi.cli("clear trace")
+
+        #
+        # Add a route that resolves the server's destination
+        #
+        route_sever_dst = VppIpRoute(self, "100.1.1.100", 32,
+                                     [VppRoutePath(self.pg1.remote_ip4,
+                                                   self.pg1.sw_if_index)])
+        route_sever_dst.add_vpp_config()
+
+        # Send PPPoE Discovery
+        tx0 = self.create_stream_pppoe_discovery(self.pg0, self.pg1,
+                                                 self.pg0.remote_mac)
+        self.pg0.add_stream(tx0)
+        self.pg_start()
+
+        # Send PPPoE PPP LCP
+        tx1 = self.create_stream_pppoe_lcp(self.pg0, self.pg1,
+                                           self.pg0.remote_mac,
+                                           self.session_id)
+        self.pg0.add_stream(tx1)
+        self.pg_start()
+
+        # Create PPPoE session
+        pppoe_if = VppPppoeInterface(self,
+                                     self.pg0.remote_ip4,
+                                     self.pg0.remote_mac,
+                                     self.session_id)
+        pppoe_if.add_vpp_config()
+
+        #
+        # The double create (create the same session twice) should fail,
+        # and we should still be able to use the original
+        #
+        try:
+            gre_if.add_vpp_config()
+        except Exception:
+            pass
+        else:
+            self.fail("Double GRE tunnel add does not fail")
+
+        #
+        # test case cleanup
+        #
+
+        # Delete PPPoE session
+        pppoe_if.remove_vpp_config()
+
+        # Delete a route that resolves the server's destination
+        route_sever_dst.remove_vpp_config()
+
+    def test_PPPoE_Del_Twice(self):
+        """ PPPoE Delete Same Session Twice Test """
+
+        self.vapi.cli("clear trace")
+
+        #
+        # Add a route that resolves the server's destination
+        #
+        route_sever_dst = VppIpRoute(self, "100.1.1.100", 32,
+                                     [VppRoutePath(self.pg1.remote_ip4,
+                                                   self.pg1.sw_if_index)])
+        route_sever_dst.add_vpp_config()
+
+        # Send PPPoE Discovery
+        tx0 = self.create_stream_pppoe_discovery(self.pg0, self.pg1,
+                                                 self.pg0.remote_mac)
+        self.pg0.add_stream(tx0)
+        self.pg_start()
+
+        # Send PPPoE PPP LCP
+        tx1 = self.create_stream_pppoe_lcp(self.pg0, self.pg1,
+                                           self.pg0.remote_mac,
+                                           self.session_id)
+        self.pg0.add_stream(tx1)
+        self.pg_start()
+
+        # Create PPPoE session
+        pppoe_if = VppPppoeInterface(self,
+                                     self.pg0.remote_ip4,
+                                     self.pg0.remote_mac,
+                                     self.session_id)
+        pppoe_if.add_vpp_config()
+
+        # Delete PPPoE session
+        pppoe_if.remove_vpp_config()
+
+        #
+        # The double del (del the same session twice) should fail,
+        # and we should still be able to use the original
+        #
+        try:
+            gre_if.remove_vpp_config()
+        except Exception:
+            pass
+        else:
+            self.fail("Double GRE tunnel del does not fail")
+
+        #
+        # test case cleanup
+        #
+
+        # Delete a route that resolves the server's destination
+        route_sever_dst.remove_vpp_config()
+
+    def test_PPPoE_Decap_Multiple(self):
+        """ PPPoE Decap Multiple Sessions Test """
+
+        self.vapi.cli("clear trace")
+
+        #
+        # Add a route that resolves the server's destination
+        #
+        route_sever_dst = VppIpRoute(self, "100.1.1.100", 32,
+                                     [VppRoutePath(self.pg1.remote_ip4,
+                                                   self.pg1.sw_if_index)])
+        route_sever_dst.add_vpp_config()
+
+        # Send PPPoE Discovery 1
+        tx0 = self.create_stream_pppoe_discovery(self.pg0, self.pg1,
+                                                 self.pg0.remote_mac)
+        self.pg0.add_stream(tx0)
+        self.pg_start()
+
+        # Send PPPoE PPP LCP 1
+        tx1 = self.create_stream_pppoe_lcp(self.pg0, self.pg1,
+                                           self.pg0.remote_mac,
+                                           self.session_id)
+        self.pg0.add_stream(tx1)
+        self.pg_start()
+
+        # Create PPPoE session 1
+        pppoe_if1 = VppPppoeInterface(self,
+                                      self.pg0.remote_ip4,
+                                      self.pg0.remote_mac,
+                                      self.session_id)
+        pppoe_if1.add_vpp_config()
+
+        # Send PPPoE Discovery 2
+        tx3 = self.create_stream_pppoe_discovery(self.pg2, self.pg1,
+                                                 self.pg2.remote_mac)
+        self.pg2.add_stream(tx3)
+        self.pg_start()
+
+        # Send PPPoE PPP LCP 2
+        tx4 = self.create_stream_pppoe_lcp(self.pg2, self.pg1,
+                                           self.pg2.remote_mac,
+                                           self.session_id + 1)
+        self.pg2.add_stream(tx4)
+        self.pg_start()
+
+        # Create PPPoE session 2
+        pppoe_if2 = VppPppoeInterface(self,
+                                      self.pg2.remote_ip4,
+                                      self.pg2.remote_mac,
+                                      self.session_id + 1)
+        pppoe_if2.add_vpp_config()
+
+        #
+        # Send tunneled packets that match the created tunnel and
+        # are decapped and forwarded
+        #
+        tx2 = self.create_stream_pppoe_ip4(self.pg0, self.pg1,
+                                           self.pg0.remote_mac,
+                                           self.session_id,
+                                           self.pg0.remote_ip4)
+        self.pg0.add_stream(tx2)
+
+        self.pg_enable_capture(self.pg_interfaces)
+        self.pg_start()
+
+        rx2 = self.pg1.get_capture(len(tx2))
+        self.verify_decapped_pppoe(self.pg0, rx2, tx2)
+
+        tx5 = self.create_stream_pppoe_ip4(self.pg2, self.pg1,
+                                           self.pg2.remote_mac,
+                                           self.session_id + 1,
+                                           self.pg2.remote_ip4)
+        self.pg2.add_stream(tx5)
+
+        self.pg_enable_capture(self.pg_interfaces)
+        self.pg_start()
+
+        rx5 = self.pg1.get_capture(len(tx5))
+        self.verify_decapped_pppoe(self.pg2, rx5, tx5)
+
+        self.logger.info(self.vapi.cli("show pppoe fib"))
+        self.logger.info(self.vapi.cli("show pppoe session"))
+        self.logger.info(self.vapi.cli("show ip fib"))
+
+        #
+        # test case cleanup
+        #
+
+        # Delete PPPoE session
+        pppoe_if1.remove_vpp_config()
+        pppoe_if2.remove_vpp_config()
+
+        # Delete a route that resolves the server's destination
+        route_sever_dst.remove_vpp_config()
+
+    def test_PPPoE_Encap_Multiple(self):
+        """ PPPoE Encap Multiple Sessions Test """
+
+        self.vapi.cli("clear trace")
+
+        #
+        # Add a route that resolves the server's destination
+        #
+        route_sever_dst = VppIpRoute(self, "100.1.1.100", 32,
+                                     [VppRoutePath(self.pg1.remote_ip4,
+                                                   self.pg1.sw_if_index)])
+        route_sever_dst.add_vpp_config()
+
+        # Send PPPoE Discovery 1
+        tx0 = self.create_stream_pppoe_discovery(self.pg0, self.pg1,
+                                                 self.pg0.remote_mac)
+        self.pg0.add_stream(tx0)
+        self.pg_start()
+
+        # Send PPPoE PPP LCP 1
+        tx1 = self.create_stream_pppoe_lcp(self.pg0, self.pg1,
+                                           self.pg0.remote_mac,
+                                           self.session_id)
+        self.pg0.add_stream(tx1)
+        self.pg_start()
+
+        # Create PPPoE session 1
+        pppoe_if1 = VppPppoeInterface(self,
+                                      self.pg0.remote_ip4,
+                                      self.pg0.remote_mac,
+                                      self.session_id)
+        pppoe_if1.add_vpp_config()
+
+        # Send PPPoE Discovery 2
+        tx3 = self.create_stream_pppoe_discovery(self.pg2, self.pg1,
+                                                 self.pg2.remote_mac)
+        self.pg2.add_stream(tx3)
+        self.pg_start()
+
+        # Send PPPoE PPP LCP 2
+        tx4 = self.create_stream_pppoe_lcp(self.pg2, self.pg1,
+                                           self.pg2.remote_mac,
+                                           self.session_id + 1)
+        self.pg2.add_stream(tx4)
+        self.pg_start()
+
+        # Create PPPoE session 2
+        pppoe_if2 = VppPppoeInterface(self,
+                                      self.pg2.remote_ip4,
+                                      self.pg2.remote_mac,
+                                      self.session_id + 1)
+        pppoe_if2.add_vpp_config()
+
+        #
+        # Send a packet stream that is routed into the session
+        #  - packets are PPPoE encapped
+        #
+        self.vapi.cli("clear trace")
+        tx2 = self.create_stream_ip4(self.pg1, self.pg0,
+                                     self.pg0.remote_ip4, self.dst_ip)
+        self.pg1.add_stream(tx2)
+
+        self.pg_enable_capture(self.pg_interfaces)
+        self.pg_start()
+
+        rx2 = self.pg0.get_capture(len(tx2))
+        self.verify_encaped_pppoe(self.pg1, rx2, tx2, self.session_id)
+
+        tx5 = self.create_stream_ip4(self.pg1, self.pg2,
+                                     self.pg2.remote_ip4, self.dst_ip)
+        self.pg1.add_stream(tx5)
+
+        self.pg_enable_capture(self.pg_interfaces)
+        self.pg_start()
+
+        rx5 = self.pg2.get_capture(len(tx5))
+        self.verify_encaped_pppoe(self.pg1, rx5, tx5, self.session_id + 1)
+
+        self.logger.info(self.vapi.cli("show pppoe fib"))
+        self.logger.info(self.vapi.cli("show pppoe session"))
+        self.logger.info(self.vapi.cli("show ip fib"))
+
+        #
+        # test case cleanup
+        #
+
+        # Delete PPPoE session
+        pppoe_if1.remove_vpp_config()
+        pppoe_if2.remove_vpp_config()
+
+        # Delete a route that resolves the server's destination
+        route_sever_dst.remove_vpp_config()
+
+if __name__ == '__main__':
+    unittest.main(testRunner=VppTestRunner)
diff --git a/test/vpp_papi_provider.py b/test/vpp_papi_provider.py
index 3ba2ad4a..4d017c1f 100644
--- a/test/vpp_papi_provider.py
+++ b/test/vpp_papi_provider.py
@@ -2087,3 +2087,29 @@ class VppPapiProvider(object):
                          'decap_vrf_id': decap_vrf_id,
                          'protocol': protocol,
                          'vni': vni})
+
+    def pppoe_add_del_session(
+            self,
+            client_ip,
+            client_mac,
+            session_id=0,
+            is_add=1,
+            is_ipv6=0,
+            decap_vrf_id=0):
+        """
+
+        :param is_add:  (Default value = 1)
+        :param is_ipv6:  (Default value = 0)
+        :param client_ip:
+        :param session_id:  (Default value = 0)
+        :param client_mac:
+        :param decap_vrf_id:  (Default value = 0)
+
+        """
+        return self.api(self.papi.pppoe_add_del_session,
+                        {'is_add': is_add,
+                         'is_ipv6': is_ipv6,
+                         'session_id': session_id,
+                         'client_ip': client_ip,
+                         'decap_vrf_id': decap_vrf_id,
+                         'client_mac': client_mac})
diff --git a/test/vpp_pppoe_interface.py b/test/vpp_pppoe_interface.py
new file mode 100644
index 00000000..9a8b8699
--- /dev/null
+++ b/test/vpp_pppoe_interface.py
@@ -0,0 +1,79 @@
+
+from vpp_interface import VppInterface
+import socket
+from util import ppp, ppc, mactobinary
+
+
+class VppPppoeInterface(VppInterface):
+    """
+    VPP Pppoe interface
+    """
+
+    def __init__(self, test, client_ip, client_mac,
+                 session_id, decap_vrf_id=0):
+        """ Create VPP PPPoE4 interface """
+        self._sw_if_index = 0
+        super(VppPppoeInterface, self).__init__(test)
+        self._test = test
+        self.client_ip = client_ip
+        self.client_mac = client_mac
+        self.session_id = session_id
+        self.decap_vrf_id = decap_vrf_id
+
+    def add_vpp_config(self):
+        cip = socket.inet_pton(socket.AF_INET, self.client_ip)
+        cmac = mactobinary(self.client_mac)
+        r = self.test.vapi.pppoe_add_del_session(
+                cip, cmac,
+                session_id=self.session_id,
+                decap_vrf_id=self.decap_vrf_id)
+        self._sw_if_index = r.sw_if_index
+        self.generate_remote_hosts()
+
+    def remove_vpp_config(self):
+        cip = socket.inet_pton(socket.AF_INET, self.client_ip)
+        cmac = mactobinary(self.client_mac)
+        self.unconfig()
+        r = self.test.vapi.pppoe_add_del_session(
+                cip, cmac,
+                session_id=self.session_id,
+                decap_vrf_id=self.decap_vrf_id,
+                is_add=0)
+
+
+class VppPppoe6Interface(VppInterface):
+    """
+    VPP Pppoe IPv6 interface
+    """
+
+    def __init__(self, test, src_ip, dst_ip, outer_fib_id=0, is_teb=0):
+        """ Create VPP PPPoE6 interface """
+        self._sw_if_index = 0
+        super(VppPppoe6Interface, self).__init__(test)
+        self._test = test
+        self.client_ip = client_ip
+        self.client_mac = client_mac
+        self.session_id = session_id
+        self.decap_vrf_id = decap_vrf_id
+
+    def add_vpp_config(self):
+        cip = socket.inet_pton(socket.AF_INET6, self.client_ip)
+        cmac = mactobinary(self.client_mac)
+        r = self.test.vapi.pppoe_add_del_session(
+                cip, cmac,
+                session_id=self.session_id,
+                decap_vrf_id=self.decap_vrf_id,
+                is_ip6=1)
+        self._sw_if_index = r.sw_if_index
+        self.generate_remote_hosts()
+
+    def remove_vpp_config(self):
+        cip = socket.inet_pton(socket.AF_INET6, self.client_ip)
+        cmac = mactobinary(self.client_mac)
+        self.unconfig()
+        r = self.test.vapi.pppoe_add_del_session(
+                cip, cmac,
+                session_id=self.session_id,
+                decap_vrf_id=self.decap_vrf_id,
+                is_add=0,
+                is_ip6=1)