diff options
Diffstat (limited to 'dpdk/dpdk-17.02_patches/0006-net-mlx5-add-hardware-TSO-support.patch')
| -rw-r--r-- | dpdk/dpdk-17.02_patches/0006-net-mlx5-add-hardware-TSO-support.patch | 385 |
1 files changed, 385 insertions, 0 deletions
diff --git a/dpdk/dpdk-17.02_patches/0006-net-mlx5-add-hardware-TSO-support.patch b/dpdk/dpdk-17.02_patches/0006-net-mlx5-add-hardware-TSO-support.patch new file mode 100644 index 00000000..929a6132 --- /dev/null +++ b/dpdk/dpdk-17.02_patches/0006-net-mlx5-add-hardware-TSO-support.patch @@ -0,0 +1,385 @@ +From e25bad4a287924d26627ffe307f8a12824b87054 Mon Sep 17 00:00:00 2001 +From: Shahaf Shuler <shahafs@mellanox.com> +Date: Thu, 2 Mar 2017 11:01:31 +0200 +Subject: [PATCH] net/mlx5: add hardware TSO support + +Implement support for hardware TSO. + +Signed-off-by: Shahaf Shuler <shahafs@mellanox.com> +Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com> +--- + doc/guides/nics/features/mlx5.ini | 1 + + doc/guides/nics/mlx5.rst | 12 ++++ + drivers/net/mlx5/mlx5.c | 18 ++++++ + drivers/net/mlx5/mlx5.h | 2 + + drivers/net/mlx5/mlx5_defs.h | 3 + + drivers/net/mlx5/mlx5_ethdev.c | 2 + + drivers/net/mlx5/mlx5_rxtx.c | 123 +++++++++++++++++++++++++++++++++----- + drivers/net/mlx5/mlx5_rxtx.h | 2 + + drivers/net/mlx5/mlx5_txq.c | 13 ++++ + 9 files changed, 160 insertions(+), 16 deletions(-) + +diff --git a/doc/guides/nics/features/mlx5.ini b/doc/guides/nics/features/mlx5.ini +index f20d214..8df25ce 100644 +--- a/doc/guides/nics/features/mlx5.ini ++++ b/doc/guides/nics/features/mlx5.ini +@@ -11,6 +11,7 @@ Queue start/stop = Y + MTU update = Y + Jumbo frame = Y + Scattered Rx = Y ++TSO = Y + Promiscuous mode = Y + Allmulticast mode = Y + Unicast MAC filter = Y +diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst +index 5f6e594..9b0ba29 100644 +--- a/doc/guides/nics/mlx5.rst ++++ b/doc/guides/nics/mlx5.rst +@@ -90,6 +90,7 @@ Features + - Secondary process TX is supported. + - KVM and VMware ESX SR-IOV modes are supported. + - RSS hash result is supported. ++- Hardware TSO. + + Limitations + ----------- +@@ -186,9 +187,20 @@ Run-time configuration + save PCI bandwidth and improve performance at the cost of a slightly + higher CPU usage. + ++ This option cannot be used in conjunction with ``tso`` below. When ``tso`` ++ is set, ``txq_mpw_en`` is disabled. ++ + It is currently only supported on the ConnectX-4 Lx and ConnectX-5 + families of adapters. Enabled by default. + ++- ``tso`` parameter [int] ++ ++ A nonzero value enables hardware TSO. ++ When hardware TSO is enabled, packets marked with TCP segmentation ++ offload will be divided into segments by the hardware. ++ ++ Disabled by default. ++ + Prerequisites + ------------- + +diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c +index d4bd469..03ed3b3 100644 +--- a/drivers/net/mlx5/mlx5.c ++++ b/drivers/net/mlx5/mlx5.c +@@ -84,6 +84,9 @@ + /* Device parameter to enable multi-packet send WQEs. */ + #define MLX5_TXQ_MPW_EN "txq_mpw_en" + ++/* Device parameter to enable hardware TSO offload. */ ++#define MLX5_TSO "tso" ++ + /** + * Retrieve integer value from environment variable. + * +@@ -290,6 +293,8 @@ mlx5_args_check(const char *key, const char *val, void *opaque) + priv->txqs_inline = tmp; + } else if (strcmp(MLX5_TXQ_MPW_EN, key) == 0) { + priv->mps &= !!tmp; /* Enable MPW only if HW supports */ ++ } else if (strcmp(MLX5_TSO, key) == 0) { ++ priv->tso = !!tmp; + } else { + WARN("%s: unknown parameter", key); + return -EINVAL; +@@ -316,6 +321,7 @@ mlx5_args(struct priv *priv, struct rte_devargs *devargs) + MLX5_TXQ_INLINE, + MLX5_TXQS_MIN_INLINE, + MLX5_TXQ_MPW_EN, ++ MLX5_TSO, + NULL, + }; + struct rte_kvargs *kvlist; +@@ -479,6 +485,7 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv, struct rte_pci_device *pci_dev) + IBV_EXP_DEVICE_ATTR_RX_HASH | + IBV_EXP_DEVICE_ATTR_VLAN_OFFLOADS | + IBV_EXP_DEVICE_ATTR_RX_PAD_END_ALIGN | ++ IBV_EXP_DEVICE_ATTR_TSO_CAPS | + 0; + + DEBUG("using port %u (%08" PRIx32 ")", port, test); +@@ -580,11 +587,22 @@ mlx5_pci_probe(struct rte_pci_driver *pci_drv, struct rte_pci_device *pci_dev) + + priv_get_num_vfs(priv, &num_vfs); + priv->sriov = (num_vfs || sriov); ++ priv->tso = ((priv->tso) && ++ (exp_device_attr.tso_caps.max_tso > 0) && ++ (exp_device_attr.tso_caps.supported_qpts & ++ (1 << IBV_QPT_RAW_ETH))); ++ if (priv->tso) ++ priv->max_tso_payload_sz = ++ exp_device_attr.tso_caps.max_tso; + if (priv->mps && !mps) { + ERROR("multi-packet send not supported on this device" + " (" MLX5_TXQ_MPW_EN ")"); + err = ENOTSUP; + goto port_error; ++ } else if (priv->mps && priv->tso) { ++ WARN("multi-packet send not supported in conjunction " ++ "with TSO. MPS disabled"); ++ priv->mps = 0; + } + /* Allocate and register default RSS hash keys. */ + priv->rss_conf = rte_calloc(__func__, hash_rxq_init_n, +diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h +index 4c4b9d4..93f129b 100644 +--- a/drivers/net/mlx5/mlx5.h ++++ b/drivers/net/mlx5/mlx5.h +@@ -126,6 +126,8 @@ struct priv { + unsigned int mps:1; /* Whether multi-packet send is supported. */ + unsigned int cqe_comp:1; /* Whether CQE compression is enabled. */ + unsigned int pending_alarm:1; /* An alarm is pending. */ ++ unsigned int tso:1; /* Whether TSO is supported. */ ++ unsigned int max_tso_payload_sz; /* Maximum TCP payload for TSO. */ + unsigned int txq_inline; /* Maximum packet size for inlining. */ + unsigned int txqs_inline; /* Queue number threshold for inlining. */ + /* RX/TX queues. */ +diff --git a/drivers/net/mlx5/mlx5_defs.h b/drivers/net/mlx5/mlx5_defs.h +index e91d245..eecb908 100644 +--- a/drivers/net/mlx5/mlx5_defs.h ++++ b/drivers/net/mlx5/mlx5_defs.h +@@ -79,4 +79,7 @@ + /* Maximum number of extended statistics counters. */ + #define MLX5_MAX_XSTATS 32 + ++/* Maximum Packet headers size (L2+L3+L4) for TSO. */ ++#define MLX5_MAX_TSO_HEADER 128 ++ + #endif /* RTE_PMD_MLX5_DEFS_H_ */ +diff --git a/drivers/net/mlx5/mlx5_ethdev.c b/drivers/net/mlx5/mlx5_ethdev.c +index 5677f03..5542193 100644 +--- a/drivers/net/mlx5/mlx5_ethdev.c ++++ b/drivers/net/mlx5/mlx5_ethdev.c +@@ -693,6 +693,8 @@ mlx5_dev_infos_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *info) + (DEV_TX_OFFLOAD_IPV4_CKSUM | + DEV_TX_OFFLOAD_UDP_CKSUM | + DEV_TX_OFFLOAD_TCP_CKSUM); ++ if (priv->tso) ++ info->tx_offload_capa |= DEV_TX_OFFLOAD_TCP_TSO; + if (priv_get_ifname(priv, &ifname) == 0) + info->if_index = if_nametoindex(ifname); + /* FIXME: RETA update/query API expects the callee to know the size of +diff --git a/drivers/net/mlx5/mlx5_rxtx.c b/drivers/net/mlx5/mlx5_rxtx.c +index 4d5455b..98889f6 100644 +--- a/drivers/net/mlx5/mlx5_rxtx.c ++++ b/drivers/net/mlx5/mlx5_rxtx.c +@@ -365,6 +365,7 @@ mlx5_tx_burst(void *dpdk_txq, struct rte_mbuf **pkts, uint16_t pkts_n) + const unsigned int elts_n = 1 << txq->elts_n; + unsigned int i = 0; + unsigned int j = 0; ++ unsigned int k = 0; + unsigned int max; + uint16_t max_wqe; + unsigned int comp; +@@ -392,8 +393,10 @@ mlx5_tx_burst(void *dpdk_txq, struct rte_mbuf **pkts, uint16_t pkts_n) + uintptr_t addr; + uint64_t naddr; + uint16_t pkt_inline_sz = MLX5_WQE_DWORD_SIZE + 2; ++ uint16_t tso_header_sz = 0; + uint16_t ehdr; + uint8_t cs_flags = 0; ++ uint64_t tso = 0; + #ifdef MLX5_PMD_SOFT_COUNTERS + uint32_t total_length = 0; + #endif +@@ -465,14 +468,74 @@ mlx5_tx_burst(void *dpdk_txq, struct rte_mbuf **pkts, uint16_t pkts_n) + length -= pkt_inline_sz; + addr += pkt_inline_sz; + } ++ if (txq->tso_en) { ++ tso = buf->ol_flags & PKT_TX_TCP_SEG; ++ if (tso) { ++ uintptr_t end = (uintptr_t) ++ (((uintptr_t)txq->wqes) + ++ (1 << txq->wqe_n) * ++ MLX5_WQE_SIZE); ++ unsigned int copy_b; ++ uint8_t vlan_sz = (buf->ol_flags & ++ PKT_TX_VLAN_PKT) ? 4 : 0; ++ ++ tso_header_sz = buf->l2_len + vlan_sz + ++ buf->l3_len + buf->l4_len; ++ ++ if (unlikely(tso_header_sz > ++ MLX5_MAX_TSO_HEADER)) ++ break; ++ copy_b = tso_header_sz - pkt_inline_sz; ++ /* First seg must contain all headers. */ ++ assert(copy_b <= length); ++ raw += MLX5_WQE_DWORD_SIZE; ++ if (copy_b && ++ ((end - (uintptr_t)raw) > copy_b)) { ++ uint16_t n = (MLX5_WQE_DS(copy_b) - ++ 1 + 3) / 4; ++ ++ if (unlikely(max_wqe < n)) ++ break; ++ max_wqe -= n; ++ rte_memcpy((void *)raw, ++ (void *)addr, copy_b); ++ addr += copy_b; ++ length -= copy_b; ++ pkt_inline_sz += copy_b; ++ /* ++ * Another DWORD will be added ++ * in the inline part. ++ */ ++ raw += MLX5_WQE_DS(copy_b) * ++ MLX5_WQE_DWORD_SIZE - ++ MLX5_WQE_DWORD_SIZE; ++ } else { ++ /* NOP WQE. */ ++ wqe->ctrl = (rte_v128u32_t){ ++ htonl(txq->wqe_ci << 8), ++ htonl(txq->qp_num_8s | 1), ++ 0, ++ 0, ++ }; ++ ds = 1; ++ total_length = 0; ++ pkts--; ++ pkts_n++; ++ elts_head = (elts_head - 1) & ++ (elts_n - 1); ++ k++; ++ goto next_wqe; ++ } ++ } ++ } + /* Inline if enough room. */ +- if (txq->max_inline) { ++ if (txq->inline_en || tso) { + uintptr_t end = (uintptr_t) + (((uintptr_t)txq->wqes) + + (1 << txq->wqe_n) * MLX5_WQE_SIZE); + unsigned int max_inline = txq->max_inline * + RTE_CACHE_LINE_SIZE - +- MLX5_WQE_DWORD_SIZE; ++ (pkt_inline_sz - 2); + uintptr_t addr_end = (addr + max_inline) & + ~(RTE_CACHE_LINE_SIZE - 1); + unsigned int copy_b = (addr_end > addr) ? +@@ -491,6 +554,18 @@ mlx5_tx_burst(void *dpdk_txq, struct rte_mbuf **pkts, uint16_t pkts_n) + if (unlikely(max_wqe < n)) + break; + max_wqe -= n; ++ if (tso) { ++ uint32_t inl = ++ htonl(copy_b | MLX5_INLINE_SEG); ++ ++ pkt_inline_sz = ++ MLX5_WQE_DS(tso_header_sz) * ++ MLX5_WQE_DWORD_SIZE; ++ rte_memcpy((void *)raw, ++ (void *)&inl, sizeof(inl)); ++ raw += sizeof(inl); ++ pkt_inline_sz += sizeof(inl); ++ } + rte_memcpy((void *)raw, (void *)addr, copy_b); + addr += copy_b; + length -= copy_b; +@@ -591,18 +666,34 @@ mlx5_tx_burst(void *dpdk_txq, struct rte_mbuf **pkts, uint16_t pkts_n) + next_pkt: + ++i; + /* Initialize known and common part of the WQE structure. */ +- wqe->ctrl = (rte_v128u32_t){ +- htonl((txq->wqe_ci << 8) | MLX5_OPCODE_SEND), +- htonl(txq->qp_num_8s | ds), +- 0, +- 0, +- }; +- wqe->eseg = (rte_v128u32_t){ +- 0, +- cs_flags, +- 0, +- (ehdr << 16) | htons(pkt_inline_sz), +- }; ++ if (tso) { ++ wqe->ctrl = (rte_v128u32_t){ ++ htonl((txq->wqe_ci << 8) | MLX5_OPCODE_TSO), ++ htonl(txq->qp_num_8s | ds), ++ 0, ++ 0, ++ }; ++ wqe->eseg = (rte_v128u32_t){ ++ 0, ++ cs_flags | (htons(buf->tso_segsz) << 16), ++ 0, ++ (ehdr << 16) | htons(tso_header_sz), ++ }; ++ } else { ++ wqe->ctrl = (rte_v128u32_t){ ++ htonl((txq->wqe_ci << 8) | MLX5_OPCODE_SEND), ++ htonl(txq->qp_num_8s | ds), ++ 0, ++ 0, ++ }; ++ wqe->eseg = (rte_v128u32_t){ ++ 0, ++ cs_flags, ++ 0, ++ (ehdr << 16) | htons(pkt_inline_sz), ++ }; ++ } ++next_wqe: + txq->wqe_ci += (ds + 3) / 4; + #ifdef MLX5_PMD_SOFT_COUNTERS + /* Increment sent bytes counter. */ +@@ -610,10 +701,10 @@ mlx5_tx_burst(void *dpdk_txq, struct rte_mbuf **pkts, uint16_t pkts_n) + #endif + } while (pkts_n); + /* Take a shortcut if nothing must be sent. */ +- if (unlikely(i == 0)) ++ if (unlikely((i + k) == 0)) + return 0; + /* Check whether completion threshold has been reached. */ +- comp = txq->elts_comp + i + j; ++ comp = txq->elts_comp + i + j + k; + if (comp >= MLX5_TX_COMP_THRESH) { + volatile struct mlx5_wqe_ctrl *w = + (volatile struct mlx5_wqe_ctrl *)wqe; +diff --git a/drivers/net/mlx5/mlx5_rxtx.h b/drivers/net/mlx5/mlx5_rxtx.h +index 41a34d7..6b328cf 100644 +--- a/drivers/net/mlx5/mlx5_rxtx.h ++++ b/drivers/net/mlx5/mlx5_rxtx.h +@@ -254,6 +254,8 @@ struct txq { + uint16_t cqe_n:4; /* Number of CQ elements (in log2). */ + uint16_t wqe_n:4; /* Number of of WQ elements (in log2). */ + uint16_t max_inline; /* Multiple of RTE_CACHE_LINE_SIZE to inline. */ ++ uint16_t inline_en:1; /* When set inline is enabled. */ ++ uint16_t tso_en:1; /* When set hardware TSO is enabled. */ + uint32_t qp_num_8s; /* QP number shifted by 8. */ + volatile struct mlx5_cqe (*cqes)[]; /* Completion queue. */ + volatile void *wqes; /* Work queue (use volatile to write into). */ +diff --git a/drivers/net/mlx5/mlx5_txq.c b/drivers/net/mlx5/mlx5_txq.c +index 949035b..995b763 100644 +--- a/drivers/net/mlx5/mlx5_txq.c ++++ b/drivers/net/mlx5/mlx5_txq.c +@@ -342,6 +342,19 @@ txq_ctrl_setup(struct rte_eth_dev *dev, struct txq_ctrl *txq_ctrl, + RTE_CACHE_LINE_SIZE); + attr.init.cap.max_inline_data = + tmpl.txq.max_inline * RTE_CACHE_LINE_SIZE; ++ tmpl.txq.inline_en = 1; ++ } ++ if (priv->tso) { ++ uint16_t max_tso_inline = ((MLX5_MAX_TSO_HEADER + ++ (RTE_CACHE_LINE_SIZE - 1)) / ++ RTE_CACHE_LINE_SIZE); ++ ++ attr.init.max_tso_header = ++ max_tso_inline * RTE_CACHE_LINE_SIZE; ++ attr.init.comp_mask |= IBV_EXP_QP_INIT_ATTR_MAX_TSO_HEADER; ++ tmpl.txq.max_inline = RTE_MAX(tmpl.txq.max_inline, ++ max_tso_inline); ++ tmpl.txq.tso_en = 1; + } + tmpl.qp = ibv_exp_create_qp(priv->ctx, &attr.init); + if (tmpl.qp == NULL) { +-- +2.7.4 + |