diff options
Diffstat (limited to 'src/scripts/vnet')
83 files changed, 3966 insertions, 0 deletions
diff --git a/src/scripts/vnet/arp4 b/src/scripts/vnet/arp4 new file mode 100644 index 00000000..acb20da3 --- /dev/null +++ b/src/scripts/vnet/arp4 @@ -0,0 +1,21 @@ +packet-generator new { + name x + limit 1 + node ip4-input + size 64-64 + no-recycle + data { + ICMP: 1.0.0.2 -> 2.0.0.2 + ICMP echo_request + incrementing 100 + } +} + +trace add pg-input 100 +loop create +loop create +set int state loop0 up +set int state loop1 up + +set int ip address loop0 1.0.0.1/24 +set int ip address loop1 2.0.0.1/24 diff --git a/src/scripts/vnet/arp4-mpls b/src/scripts/vnet/arp4-mpls new file mode 100644 index 00000000..d3d39f3b --- /dev/null +++ b/src/scripts/vnet/arp4-mpls @@ -0,0 +1,24 @@ +packet-generator new { + name x + limit 1 + node ip4-input + size 64-64 + no-recycle + data { + ICMP: 1.0.0.2 -> 2.2.2.2 + ICMP echo_request + incrementing 100 + } +} + +loop create +loop create +set int state loop0 up +set int state loop1 up + +set int ip address loop0 1.0.0.1/24 +set int ip address loop1 2.0.0.1/24 + +ip route add 2.2.2.2/32 via 2.0.0.2 loop1 out-label 33 + +trace add pg-input 100 diff --git a/src/scripts/vnet/arp6 b/src/scripts/vnet/arp6 new file mode 100644 index 00000000..e6a98935 --- /dev/null +++ b/src/scripts/vnet/arp6 @@ -0,0 +1,21 @@ +packet-generator new { + name x + limit 1 + node ip6-input + size 64-64 + no-recycle + data { + ICMP6: 2000::2 -> 2001::2 + ICMP echo_request + incrementing 100 + } +} + +tr add pg-input 100 +loop create +loop create +set int state loop0 up +set int state loop1 up + +set int ip address loop0 2000::1/64 +set int ip address loop1 2001::1/64 diff --git a/src/scripts/vnet/bvi b/src/scripts/vnet/bvi new file mode 100644 index 00000000..2174da0d --- /dev/null +++ b/src/scripts/vnet/bvi @@ -0,0 +1,76 @@ + + +set int state tuntap-0 down +set int ip address GigabitEthernet2/1/0 1.2.3.4/24 + +set int state GigabitEthernet2/1/0 up +cre sub GigabitEthernet2/1/0 1 dot1q 7 +set int state GigabitEthernet2/1/0.1 up + +set int state GigabitEthernet2/2/0 up +cre sub GigabitEthernet2/2/0 1 dot1q 9 +set int state GigabitEthernet2/2/0.1 up + + +loop create +set int l2 bridge loop0 0 bvi +set int ip table loop0 0 +set int state loop0 up + + +set int l2 bridge GigabitEthernet2/1/0.1 0 +set int l2 bridge GigabitEthernet2/2/0.1 0 + +set int l2 tag-rewrite GigabitEthernet2/1/0.1 pop 1 +set int l2 tag-rewrite GigabitEthernet2/2/0.1 pop 1 + +l2fib add 00:22:44:06:08:0a 0 GigabitEthernet2/1/0.1 static +l2fib add 00:02:04:06:08:0a 0 GigabitEthernet2/2/0.1 static + + +ip route table 0 8.0.0.1/32 via loop0 +set ip arp loop0 8.0.0.1 00:02:04:06:08:0a + + +ip route add 1.2.3.3/32 via GigabitEthernet2/1/0 IP4: 00:15:17:61:73:47 -> 00:15:17:61:73:46 + +cle er +cle int +cle run + +packet-generator new { + name bvi_to_l2 + limit 100 + no-recycle + node ethernet-input + interface GigabitEthernet2/1/0 + data { + IP4: 0050.56b7.7c83 -> 0050.56b7.296d + GRE: 1.2.3.3 -> 8.0.0.1 mpls_unicast + } +} + +packet-generator new { + name l2_to_bvi + limit 50 + no-recycle + node ethernet-input + interface GigabitEthernet2/2/0 + data { + IP4: 0050.56b7.7c83 -> dead.0000.0000 vlan 9 + GRE: 8.0.0.1 -> 1.2.3.3 mpls_unicast + } +} + +packet-generator new { + name l2_to_bvi_via_flood + limit 25 + no-recycle + node ethernet-input + interface GigabitEthernet2/2/0 + data { + IP4: 0050.56b7.7c83 -> ffff.ffff.ffff vlan 9 + GRE: 8.0.0.1 -> 1.2.3.3 mpls_unicast + } +} + diff --git a/src/scripts/vnet/dhcp/dhcpd.conf b/src/scripts/vnet/dhcp/dhcpd.conf new file mode 100644 index 00000000..d4cb3ed7 --- /dev/null +++ b/src/scripts/vnet/dhcp/dhcpd.conf @@ -0,0 +1,8 @@ +# add at the bottom + +subnet 192.168.0.0 netmask 255.255.0.0 { + range 192.168.1.10 192.168.1.254; + option routers 192.168.1.1; + default-lease-time 15; + max-lease-time 15; +} diff --git a/src/scripts/vnet/dhcp/left-ping-target.sh b/src/scripts/vnet/dhcp/left-ping-target.sh new file mode 100644 index 00000000..2edc2a50 --- /dev/null +++ b/src/scripts/vnet/dhcp/left-ping-target.sh @@ -0,0 +1,4 @@ +#!/bin/bash + +# to obtain dhcp address from leftpeer +dhclient -d -v eth1 diff --git a/src/scripts/vnet/dhcp/leftpeer.conf b/src/scripts/vnet/dhcp/leftpeer.conf new file mode 100644 index 00000000..458eecf0 --- /dev/null +++ b/src/scripts/vnet/dhcp/leftpeer.conf @@ -0,0 +1,17 @@ +set int ip table GigabitEthernet2/2/0 12 +set int ip address GigabitEthernet2/2/0 192.168.1.1/24 +set int state GigabitEthernet2/2/0 up + +set int ip table GigabitEthernet2/7/0 11 +set int ip address GigabitEthernet2/7/0 192.168.2.1/24 +set int state GigabitEthernet2/7/0 up + +comment { set dhcp proxy server 1.2.3.4 src-address 1.2.3.5 add-option-82 rx-fib-id 0 server-fib-id 0 } + +comment { set dhcp proxy server 192.168.2.2 src-address 192.168.2.1 add-option-82 rx-fib-id 12 server-fib-id 11 } + +ip route add 0.0.0.0/24 table 11 via local +ip route add 255.255.255.255/24 table 11 via local + +ip route add 0.0.0.0/24 table 12 via local +ip route add 255.255.255.255/24 table 12 via local diff --git a/src/scripts/vnet/dhcp/proxy b/src/scripts/vnet/dhcp/proxy new file mode 100644 index 00000000..42dff2a0 --- /dev/null +++ b/src/scripts/vnet/dhcp/proxy @@ -0,0 +1,22 @@ +loop create +loop create + +set int state loop0 up +set int state loop1 up + +set int ip table loop1 1 +set int ip6 table loop1 1 + +set int ip addr loop0 10.0.0.1/24 +set int ip addr loop0 10.0.1.1/24 + +set int ip addr loop0 2001::1/64 +set int ip addr loop0 2001:1::1/64 + +set dhcp proxy server 10.255.0.1 src-address 10.0.0.1 server-fib-id 0 rx-fib-id 0 +set dhcp proxy server 10.255.0.2 src-address 10.0.0.1 server-fib-id 0 rx-fib-id 0 +set dhcp proxy server 10.255.1.2 src-address 10.0.1.1 server-fib-id 1 rx-fib-id 1 + +set dhcpv6 proxy server 3001::1 src-address 2001::1 server-fib-id 0 rx-fib-id 0 +set dhcpv6 proxy server 3002::1 src-address 2001:1::1 server-fib-id 1 rx-fib-id 1 + diff --git a/src/scripts/vnet/icmp b/src/scripts/vnet/icmp new file mode 100644 index 00000000..1e054e2d --- /dev/null +++ b/src/scripts/vnet/icmp @@ -0,0 +1,16 @@ +packet-generator new { + name x + limit 1 + node ip4-input + size 64-64 + no-recycle + data { + ICMP: 1.2.3.4 -> 5.6.7.8 + ICMP echo_request + incrementing 100 + } +} + +tr add pg-input 100 +ip route 5.6.7.8/32 via local +ip route 1.2.3.4/32 via local diff --git a/src/scripts/vnet/icmp6 b/src/scripts/vnet/icmp6 new file mode 100644 index 00000000..2a65acba --- /dev/null +++ b/src/scripts/vnet/icmp6 @@ -0,0 +1,16 @@ +packet-generator new { + name x + limit 1 + node ip6-input + size 64-64 + no-recycle + data { + ICMP6: ::1 -> ::2 + ICMP echo_request + incrementing 100 + } +} + +tr add pg-input 100 +ip route ::1/128 via local +ip route ::2/128 via local diff --git a/src/scripts/vnet/ige b/src/scripts/vnet/ige new file mode 100644 index 00000000..80d045af --- /dev/null +++ b/src/scripts/vnet/ige @@ -0,0 +1,19 @@ +packet-generator new { + name x + limit 1 + node ip4-lookup + size 50-50 + data { + ICMP: 1.0.0.1 -> 1.0.0.3 ttl 1 + incrementing 30 + } +} + +comment { tr add pg-input 100 } +set int ip address GigabitEthernet4/0/0 1.0.0.1/24 +set int ip address GigabitEthernet4/0/1 1.0.0.2/24 +set int state GigabitEthernet4/0/0 up +set int state GigabitEthernet4/0/1 up + +ip route add 1.0.0.3/32 via GigabitEthernet4/0/1 IP4: 00:15:17:61:73:47 -> 00:15:17:61:73:46 +tr add ige-input 10 diff --git a/src/scripts/vnet/ip6 b/src/scripts/vnet/ip6 new file mode 100644 index 00000000..adb27225 --- /dev/null +++ b/src/scripts/vnet/ip6 @@ -0,0 +1,29 @@ +packet-generator new { + name x + limit 1 + node ethernet-input + size 64-64 + no-recycle + data { + IP6: 1.2.3 -> 4.5.6 + ICMP: 3002::2 -> 3001::2 + ICMP echo_request + incrementing 100 + } +} + + +loop create +loop create +set int state loop0 up +set int state loop1 up + +set int ip address loop0 2001:1::1/64 +set int ip address loop1 2001:2::1/64 + +set ip6 neighbor loop0 2001:1::2 00:00:DD:EE:AA:DD +set ip6 neighbor loop1 2001:2::2 00:00:DD:EE:AA:EE + +ip route add 3001::/64 via 2001:2::2 loop1 + +trace add pg-input 100 diff --git a/src/scripts/vnet/ip6-hbh b/src/scripts/vnet/ip6-hbh new file mode 100644 index 00000000..0c6de47f --- /dev/null +++ b/src/scripts/vnet/ip6-hbh @@ -0,0 +1,84 @@ +tap connect tap0 +set int state tap-0 up +set int ip address tap-0 1::1/64 +packet-generator new { + name hbh1 + limit 1 + node ip6-input + size 48-48 + no-recycle + data { + IP6_HOP_BY_HOP_OPTIONS: 1::2 -> 1::2 + hex 0x3B00010403040506 + incrementing 100 + } +} +packet-generator new { + name hbh2 + limit 1 + node ip6-input + size 48-48 + no-recycle + data { + IP6_HOP_BY_HOP_OPTIONS: 1::2 -> 1::2 + hex 0x3B00C10403040506 + incrementing 100 + } +} + +packet-generator new { + name hbh3 + limit 1 + node ip6-input + size 48-48 + no-recycle + data { + IP6_HOP_BY_HOP_OPTIONS: 1::2 -> 1::2 + hex 0x3BffC10403040506 + incrementing 100 + } +} + +packet-generator new { + name hbh4 + limit 1 + node ip6-input + size 64-64 + no-recycle + data { + IP6_HOP_BY_HOP_OPTIONS: 1::2 -> 1::2 + hex 0x3BffC10403040506 + incrementing 100 + } +} + +packet-generator new { + name hbh5 + limit 1 + node ip6-input + size 56-56 + no-recycle + data { + IP6_HOP_BY_HOP_OPTIONS: 1::2 -> 1::2 + length 16 + hex 0x3B010104030405060106030405060708 + incrementing 100 + } +} + +packet-generator new { + name hbh6 + limit 1 + node ip6-input + size 56-56 + no-recycle + data { + IP6_HOP_BY_HOP_OPTIONS: 1::2 -> 1::2 + length 16 + hex 0x3a00050200000100 + ICMP echo_request + incrementing 100 + } +} + +tr add pg-input 100 diff --git a/src/scripts/vnet/ixge b/src/scripts/vnet/ixge new file mode 100644 index 00000000..6722b536 --- /dev/null +++ b/src/scripts/vnet/ixge @@ -0,0 +1,15 @@ +packet-generator new { + name x + limit 1 + node ip4-lookup + size 50-50 + data { + ICMP: 1.0.0.1 -> 1.0.0.3 ttl 1 + incrementing 30 + } +} + +comment { tr add pg-input 100 } +set int ip address TenGigabitEthernet5/0/0 33.0.1.1/8 +set int state TenGigabitEthernet5/0/0 up + diff --git a/src/scripts/vnet/l2efpfilter b/src/scripts/vnet/l2efpfilter new file mode 100644 index 00000000..307b4436 --- /dev/null +++ b/src/scripts/vnet/l2efpfilter @@ -0,0 +1,83 @@ + +set int ip address GigabitEthernet2/1/0 1.2.3.4/24 +set int state GigabitEthernet2/1/0 up +set int state tuntap-0 down + + +cre sub GigabitEthernet2/1/0 1 dot1q 1 +cre sub GigabitEthernet2/1/0 2 dot1q 2 +cre sub GigabitEthernet2/1/0 3 dot1q 3 +cre sub GigabitEthernet2/2/0 1 dot1q 1 +cre sub GigabitEthernet2/2/0 100 dot1q 100 + +set int l2 bridge GigabitEthernet2/1/0 0 +set int l2 bridge GigabitEthernet2/1/0.1 0 +set int l2 bridge GigabitEthernet2/1/0.2 0 +set int l2 bridge GigabitEthernet2/1/0.3 0 +set int l2 bridge GigabitEthernet2/2/0 0 +set int l2 bridge GigabitEthernet2/2/0.1 0 +set int l2 bridge GigabitEthernet2/2/0.100 0 + +set int l2 tag-rewrite GigabitEthernet2/2/0.1 push dot1q 50 +set int l2 tag-rewrite GigabitEthernet2/1/0.2 translate 1-1 dot1q 100 +set int l2 tag-rewrite GigabitEthernet2/1/0.3 translate 1-1 dot1q 99 + +set int l2 efp-filter GigabitEthernet2/2/0 +set int l2 efp-filter GigabitEthernet2/2/0.1 +set int l2 efp-filter GigabitEthernet2/2/0.100 + + +l2fib add 00:00:00:00:00:11 0 GigabitEthernet2/2/0.1 static +l2fib add 00:00:00:00:00:22 0 GigabitEthernet2/2/0.100 static + +set int state GigabitEthernet2/1/0 up +set int state GigabitEthernet2/1/0.1 up +set int state GigabitEthernet2/1/0.2 up +set int state GigabitEthernet2/1/0.3 up +set int state GigabitEthernet2/2/0 up +set int state GigabitEthernet2/2/0.1 up +set int state GigabitEthernet2/2/0.100 up + + +trace add pg-input 6 + +clear error +clear run +clear int + +packet-generator new { + name pre_vtr_fail + limit 10 + no-recycle + node ethernet-input + interface GigabitEthernet2/1/0 + data { + IP4: 0050.56b7.7c83 -> 00:00:00:00:00:11 vlan 1 + GRE: 8.0.0.1 -> 1.2.3.3 mpls_unicast + } +} + +packet-generator new { + name post_vtr_pass + limit 20 + no-recycle + node ethernet-input + interface GigabitEthernet2/1/0 + data { + IP4: 0050.56b7.7c83 -> 00:00:00:00:00:22 vlan 2 + GRE: 8.0.0.1 -> 1.2.3.3 mpls_unicast + } +} + +packet-generator new { + name post_vtr_fail + limit 50 + no-recycle + node ethernet-input + interface GigabitEthernet2/1/0 + data { + IP4: 0050.56b7.7c83 -> 00:00:00:00:00:22 vlan 3 + GRE: 8.0.0.1 -> 1.2.3.3 mpls_unicast + } +} + diff --git a/src/scripts/vnet/l2efpfilter_perf b/src/scripts/vnet/l2efpfilter_perf new file mode 100644 index 00000000..b2f4b490 --- /dev/null +++ b/src/scripts/vnet/l2efpfilter_perf @@ -0,0 +1,58 @@ + +set int ip address GigabitEthernet2/1/0 1.2.3.4/24 +set int state GigabitEthernet2/1/0 up +set int state tuntap-0 down + + +cre sub GigabitEthernet2/1/0 1 dot1q 1 +cre sub GigabitEthernet2/1/0 2 dot1q 2 +cre sub GigabitEthernet2/1/0 3 dot1q 3 +cre sub GigabitEthernet2/2/0 1 dot1q 1 +cre sub GigabitEthernet2/2/0 100 dot1q 100 + +set int l2 bridge GigabitEthernet2/1/0 0 +set int l2 bridge GigabitEthernet2/1/0.1 0 +set int l2 bridge GigabitEthernet2/1/0.2 0 +set int l2 bridge GigabitEthernet2/1/0.3 0 +set int l2 bridge GigabitEthernet2/2/0 0 +set int l2 bridge GigabitEthernet2/2/0.1 0 +set int l2 bridge GigabitEthernet2/2/0.100 0 + +set int l2 tag-rewrite GigabitEthernet2/2/0.1 push dot1q 50 +set int l2 tag-rewrite GigabitEthernet2/1/0.2 translate 1-1 dot1q 100 +set int l2 tag-rewrite GigabitEthernet2/1/0.3 translate 1-1 dot1q 99 + +set int l2 efp-filter GigabitEthernet2/2/0 +set int l2 efp-filter GigabitEthernet2/2/0.1 +set int l2 efp-filter GigabitEthernet2/2/0.100 + + +l2fib add 00:00:00:00:00:11 0 GigabitEthernet2/2/0.1 static +l2fib add 00:00:00:00:00:22 0 GigabitEthernet2/2/0.100 static + +set int state GigabitEthernet2/1/0 up +set int state GigabitEthernet2/1/0.1 up +set int state GigabitEthernet2/1/0.2 up +set int state GigabitEthernet2/1/0.3 up +set int state GigabitEthernet2/2/0 up +set int state GigabitEthernet2/2/0.1 up +set int state GigabitEthernet2/2/0.100 up + + +trace add pg-input 6 + +clear error +clear run +clear int + +packet-generator new { + name post_vtr_pass + limit 9111003 + no-recycle + node ethernet-input + interface GigabitEthernet2/1/0 + data { + IP4: 0050.56b7.7c83 -> 00:00:00:00:00:22 vlan 2 + GRE: 8.0.0.1 -> 1.2.3.3 mpls_unicast + } +} diff --git a/src/scripts/vnet/l2fib b/src/scripts/vnet/l2fib new file mode 100644 index 00000000..81ede171 --- /dev/null +++ b/src/scripts/vnet/l2fib @@ -0,0 +1,46 @@ + +set int ip address GigabitEthernet2/1/0 1.2.3.4/24 +set int state GigabitEthernet2/1/0 up + +set int state GigabitEthernet2/2/0 up +cre sub GigabitEthernet2/2/0 1 dot1q 9 +set int state GigabitEthernet2/2/0.1 up +set int state tuntap-0 down + +set int acl input GigabitEthernet2/1/0 +set int acl output GigabitEthernet2/1/0 +set int acl input GigabitEthernet2/2/0.1 +set int acl output GigabitEthernet2/2/0.1 + +set int l2 bridge GigabitEthernet2/1/0 0 +set int l2 bridge GigabitEthernet2/2/0.1 0 + +set int l2 tag-rewrite GigabitEthernet2/1/0 push dot1q 50 +set int l2 tag-rewrite GigabitEthernet2/2/0.1 pop 1 + + +trace add pg-input 6 + +clear error +clear run +clear int + +packet-generator new { + name new_input_if_index_mac_move + limit 4 + no-recycle + node ethernet-input + interface GigabitEthernet2/1/0 + size 98-98 + data { hex 0x00010203040500020406080a080045006402b46b96000100096978676265000500bf436973636f20494f5320536f6674776172652c2040160011000000010101cc000400000000001a00100000000100000000ffffffff } +} + +packet-generator new { + name dmac_hit + limit 7 + no-recycle + node ethernet-input + interface GigabitEthernet2/2/0 + size 98-98 + data { hex 0x00020406080a00224406080a8100000981000011080045006402b46b96000100096978676265000500bf436973636f20494f5320536f6674776172652c2040160011000000010101cc000400000000001a00100000000100000000ffffffff } +} diff --git a/src/scripts/vnet/l2fib_perf b/src/scripts/vnet/l2fib_perf new file mode 100644 index 00000000..638317ff --- /dev/null +++ b/src/scripts/vnet/l2fib_perf @@ -0,0 +1,29 @@ + +set int ip address GigabitEthernet2/1/0 1.2.3.4/24 +set int state GigabitEthernet2/1/0 up + +set int state GigabitEthernet2/2/0 up +cre sub GigabitEthernet2/2/0 1 dot1q 9 +set int state GigabitEthernet2/2/0.1 up +set int state tuntap-0 down + +set int l2 bridge GigabitEthernet2/1/0 0 +set int l2 bridge GigabitEthernet2/2/0.1 0 + +l2fib add 00:22:44:06:08:0a 0 GigabitEthernet2/1/0 static +l2fib add 00:02:04:06:08:0a 0 GigabitEthernet2/2/0.1 static + +cle er +cle int +cle run + +packet-generator new { + name perf + limit 9111003 + no-recycle + node ethernet-input + interface GigabitEthernet2/2/0.1 + size 98-98 + data { hex 0x00224406080a00020406080a81000009080045006402b46b96000100096978676265000500bf436973636f20494f5320536f6674776172652c2040160011000000010101cc000400000000001a00100000000100000000ffffffff } +} + diff --git a/src/scripts/vnet/l2fib_xc b/src/scripts/vnet/l2fib_xc new file mode 100644 index 00000000..35d7342b --- /dev/null +++ b/src/scripts/vnet/l2fib_xc @@ -0,0 +1,31 @@ + +set int ip address GigabitEthernet2/1/0 1.2.3.4/24 +set int state GigabitEthernet2/1/0 up + +set int state GigabitEthernet2/2/0 up +cre sub GigabitEthernet2/2/0 1 dot1q 9 +set int state GigabitEthernet2/2/0.1 up +set int state tuntap-0 down + +set int acl input GigabitEthernet2/1/0 +set int acl output GigabitEthernet2/1/0 +set int acl input GigabitEthernet2/2/0.1 +set int acl output GigabitEthernet2/2/0.1 + +set int l2 xc GigabitEthernet2/1/0 GigabitEthernet2/2/0.1 +set int l2 xc GigabitEthernet2/2/0.1 GigabitEthernet2/1/0 + +clear error +clear run +clear int + +packet-generator new { + name xc + limit 11 + no-recycle + node ethernet-input + interface GigabitEthernet2/1/0 + size 98-98 + data { hex 0x00010203040500020406080a080045006402b46b96000100096978676265000500bf436973636f20494f5320536f6674776172652c2040160011000000010101cc000400000000001a00100000000100000000ffffffff } +} + diff --git a/src/scripts/vnet/l2flood b/src/scripts/vnet/l2flood new file mode 100644 index 00000000..013462ce --- /dev/null +++ b/src/scripts/vnet/l2flood @@ -0,0 +1,42 @@ + +set int ip address GigabitEthernet2/1/0 1.2.3.4/24 +set int state GigabitEthernet2/1/0 up +set int state tuntap-0 down + + +loop create +cre sub loop0 1 dot1q 1 +cre sub loop0 2 dot1q 2 +cre sub loop0 3 dot1q 3 +cre sub GigabitEthernet2/1/0 1 dot1q 1 + + +set int l2 bridge loop0.1 7 +set int l2 bridge loop0.2 7 +set int l2 bridge loop0.3 7 +set int l2 bridge GigabitEthernet2/1/0.1 7 + +loop cre +set int l2 bridge loop1 7 bvi + +set int state GigabitEthernet2/1/0.1 up + +trace add pg-input 6 + +clear error +clear run +clear int + +packet-generator new { + name flood + limit 1 + no-recycle + node ethernet-input + interface GigabitEthernet2/1/0 + data { + IP4: 0050.56b7.7c83 -> ffff.ffff.ffff vlan 1 + GRE: 8.0.0.1 -> 1.2.3.3 mpls_unicast + } + +} + diff --git a/src/scripts/vnet/l2tp b/src/scripts/vnet/l2tp new file mode 100644 index 00000000..337805aa --- /dev/null +++ b/src/scripts/vnet/l2tp @@ -0,0 +1,134 @@ + +set int ip address GigabitEthernet2/1/0 1.2.3.4/24 +set int state GigabitEthernet2/1/0 up +set int state tuntap-0 down + + +cre sub GigabitEthernet2/1/0 1 dot1q 1 +cre sub GigabitEthernet2/1/0 2 dot1q 2 +cre sub GigabitEthernet2/1/0 3 dot1q 3 +cre sub GigabitEthernet2/2/0 1 dot1q 1 +cre sub GigabitEthernet2/2/0 100 dot1q 100 + + +set int l2 tag-rewrite GigabitEthernet2/1/0.1 pop 1 +set int l2 tag-rewrite GigabitEthernet2/1/0.2 pop 1 + + +l2tp session add client 11::1 our 22::2 l2-interface GigabitEthernet2/1/0.1 +l2tp session add client 11::1 our 22::3 l2-interface GigabitEthernet2/1/0.2 local-session-id 2 l2-sublayer-present + +ip route 11::1/128 via GigabitEthernet2/2/0 +set ip6 neighbor GigabitEthernet2/2/0 11::1 00:02:04:06:08:0a + +enable ip6 interface GigabitEthernet2/2/0 + +set int ip6 l2tpv3 GigabitEthernet2/2/0 + +set int state GigabitEthernet2/1/0 up +set int state GigabitEthernet2/1/0.1 up +set int state GigabitEthernet2/1/0.2 up +set int state GigabitEthernet2/1/0.3 up +set int state GigabitEthernet2/2/0 up + + +trace add pg-input 2 + +clear error +clear run +clear int + +packet-generator new { + name decap + limit 10 + size 200-200 + no-recycle + node ethernet-input + interface GigabitEthernet2/2/0 + data { + IP6: 00:50:00:00:00:01 -> 00:50:56:b7:29:7a + L2TP: 11::1 -> 22::2 + L2TP: session_id 1 cookie 0xffffffffffffffff + IP4: 00:55:55:55:00:01 -> 00:dd:dd:dd:00:01 + UDP: 1.2.3.4 -> 5.6.7.8 + incrementing 8 + } +} + +packet-generator new { + name decap_bad_sid + limit 30 + size 200-200 + no-recycle + node ethernet-input + interface GigabitEthernet2/2/0 + data { + IP6: 00:50:00:00:00:01 -> 00:50:56:b7:29:7a + L2TP: 11::1 -> 22::2 + L2TP: session_id 0x999 cookie 0xffffffffffffffff + IP4: 00:55:55:55:00:01 -> 00:dd:dd:dd:00:01 + UDP: 1.2.3.4 -> 5.6.7.8 + incrementing 8 + } +} + +packet-generator new { + name decap_bad_cookie + limit 50 + size 200-200 + no-recycle + node ethernet-input + interface GigabitEthernet2/2/0 + data { + IP6: 00:50:00:00:00:01 -> 00:50:56:b7:29:7a + L2TP: 11::1 -> 22::2 + L2TP: session_id 1 cookie 0x3333ffffffffffff + IP4: 00:55:55:55:00:01 -> 00:dd:dd:dd:00:01 + UDP: 1.2.3.4 -> 5.6.7.8 + incrementing 8 + } +} + +packet-generator new { + name encap + limit 100 + no-recycle + node ethernet-input + interface GigabitEthernet2/1/0 + data { + IP4: 0000.5555.0002 -> 00:00:dd:dd:00:02 vlan 1 + UDP: 1.2.3.4 -> 5.6.7.8 + incrementing 8 + } +} + +packet-generator new { + name decap_sublayer + limit 300 + size 200-200 + no-recycle + node ethernet-input + interface GigabitEthernet2/2/0 + data { + IP6: 00:50:00:00:00:01 -> 00:50:56:b7:29:7a + L2TP: 11::1 -> 22::3 + L2TP: session_id 2 cookie 0xffffffffffffffff l2_sublayer 0 + IP4: 00:55:55:55:00:01 -> 00:dd:dd:dd:00:01 + UDP: 1.2.3.4 -> 5.6.7.8 + incrementing 8 + } +} + +packet-generator new { + name encap_sublayer + limit 700 + no-recycle + node ethernet-input + interface GigabitEthernet2/1/0 + data { + IP4: 0000.5555.0002 -> 00:00:dd:dd:00:02 vlan 2 + UDP: 1.2.3.4 -> 5.6.7.8 + incrementing 8 + } +} + diff --git a/src/scripts/vnet/leftpeer/leftpeer-classify b/src/scripts/vnet/leftpeer/leftpeer-classify new file mode 100755 index 00000000..74285912 --- /dev/null +++ b/src/scripts/vnet/leftpeer/leftpeer-classify @@ -0,0 +1,8 @@ +classify table mask l2 src l3 ip4 src buckets 2 miss-next local + +comment { classify table mask l3 ip4 src buckets 2 miss-next local } +set ip classify intfc GigabitEthernet2/2/0 table-index 0 +set int ip address GigabitEthernet2/2/0 192.168.1.1/24 +set int state GigabitEthernet2/2/0 up + +classify session hit-next local table-index 0 match l2 src 00:50:56:b7:05:bb l3 ip4 src 192.168.1.2 diff --git a/src/scripts/vnet/leftpeer/leftpeer-classify6 b/src/scripts/vnet/leftpeer/leftpeer-classify6 new file mode 100644 index 00000000..6579d50d --- /dev/null +++ b/src/scripts/vnet/leftpeer/leftpeer-classify6 @@ -0,0 +1,5 @@ +classify table mask l3 ip6 src buckets 2 miss-next local +set ip6 classify intfc GigabitEthernet2/2/0 table-index 0 +set int ip address GigabitEthernet2/2/0 db01::1/64 +set int state GigabitEthernet2/2/0 up +classify session hit-next local table-index 0 match l3 ip6 src db01::2 diff --git a/src/scripts/vnet/leftpeer/leftpeer-classifyl2 b/src/scripts/vnet/leftpeer/leftpeer-classifyl2 new file mode 100644 index 00000000..6be4b1e5 --- /dev/null +++ b/src/scripts/vnet/leftpeer/leftpeer-classifyl2 @@ -0,0 +1,8 @@ +set int ip address GigabitEthernet2/2/0 192.168.1.1/24 +set int state GigabitEthernet2/2/0 up + +classify table mask l3 ip4 src buckets 2 l2-miss-next ethernet + +classify session advance 14 l2-hit-next ip4 table-index 0 match l3 ip4 src 192.168.1.2 + +set int l2 class intfc GigabitEthernet2/2/0 ip4-table 0 diff --git a/src/scripts/vnet/leftpeer/leftpeer-dhcp b/src/scripts/vnet/leftpeer/leftpeer-dhcp new file mode 100644 index 00000000..c13a8f3a --- /dev/null +++ b/src/scripts/vnet/leftpeer/leftpeer-dhcp @@ -0,0 +1,23 @@ +loop cre +set int ip table loop0 12 +set int ip address loop0 192.168.1.1/24 +set int state loop0 up + +set int ip table GigabitEthernet2/2/0 12 +comment { set int ip address GigabitEthernet2/2/0 192.168.1.1/24 } +set int unnumbered GigabitEthernet2/2/0 use loop0 +set int state GigabitEthernet2/2/0 up + +set int ip table GigabitEthernet2/7/0 11 +set int ip address GigabitEthernet2/7/0 192.168.2.1/24 +set int state GigabitEthernet2/7/0 up + +uncomment { set dhcp proxy server 1.2.3.4 src-address 1.2.3.5 add-option-82 rx-fib-id 0 server-fib-id 0 } + +uncomment { set dhcp proxy server 192.168.2.2 src-address 192.168.2.1 add-option-82 rx-fib-id 12 server-fib-id 11 } + +ip route add 0.0.0.0/24 table 11 via local +ip route add 255.255.255.255/24 table 11 via local + +ip route add 0.0.0.0/24 table 12 via local +ip route add 255.255.255.255/24 table 12 via local diff --git a/src/scripts/vnet/leftpeer/leftpeer-ioam.conf b/src/scripts/vnet/leftpeer/leftpeer-ioam.conf new file mode 100644 index 00000000..6c1b502c --- /dev/null +++ b/src/scripts/vnet/leftpeer/leftpeer-ioam.conf @@ -0,0 +1,15 @@ +comment { connects to linux ping source eth1 addr db02::2/64 } +set int ip address GigabitEthernet2/2/0 db02::1/64 +set int state GigabitEthernet2/2/0 up + +comment { connects to ioam domain rightpeer eth2 addr db03::3/64 } +set int ip address GigabitEthernet2/3/0 db03::1/64 +set int state GigabitEthernet2/3/0 up + +ioam set rewrite trace-elts 2 pow + +set ip6 neighbor GigabitEthernet2/3/0 db03::3 00:50:56:b7:05:cb + +ip route add db04::0/64 via db03::3 + +ioam set destination db04::0/64 add diff --git a/src/scripts/vnet/leftpeer/leftpeer-l3vxlan.conf b/src/scripts/vnet/leftpeer/leftpeer-l3vxlan.conf new file mode 100644 index 00000000..a75f9b4c --- /dev/null +++ b/src/scripts/vnet/leftpeer/leftpeer-l3vxlan.conf @@ -0,0 +1,12 @@ +comment { tunnel to rightpeer 6.0.3.3 on vlan 101 } + +set int ip address GigabitEthernet2/3/0 6.0.3.1/24 +set int state GigabitEthernet2/3/0 up + +comment { configure lc2 eth1 at e.g. 6.0.2.2/24 } + +set int ip address GigabitEthernet2/2/0 6.0.2.1/24 +set int state GigabitEthernet2/2/0 up + +vxlan tunnel src 6.0.3.1 peer 6.0.3.3 vni 123 adj 6.0.4.4/24 + diff --git a/src/scripts/vnet/leftpeer/leftpeer-lisp.conf b/src/scripts/vnet/leftpeer/leftpeer-lisp.conf new file mode 100644 index 00000000..cb3180b7 --- /dev/null +++ b/src/scripts/vnet/leftpeer/leftpeer-lisp.conf @@ -0,0 +1,18 @@ +comment { vpe_phase2 configuration } + +comment { local client facing interface on vlan 100 } +comment { configure lc2 eth1 at e.g. 6.0.2.2/24 } + +set int ip address GigabitEthernet2/2/0 6.0.2.1/24 +set int state GigabitEthernet2/2/0 up + +comment { tunnel to rightpeer on vlan 101 } +set int ip address GigabitEthernet2/3/0 6.0.3.1/24 +set int state GigabitEthernet2/3/0 up + +lisp gpe tunnel src 6.0.3.1 dst 6.0.3.3 next-ip4 decap-next ip4 iid 1133 +set int ip address lisp_gpe_tunnel0 6.0.4.1/24 +set int state lisp_gpe_tunnel0 up + +lisp gpe tunnel src 6.0.3.3 dst 6.0.3.1 next-ip4 decap-next ip4 iid 3311 +set int stat lisp_gpe_tunnel1 up diff --git a/src/scripts/vnet/leftpeer/leftpeer-mpls.conf b/src/scripts/vnet/leftpeer/leftpeer-mpls.conf new file mode 100644 index 00000000..74bce81b --- /dev/null +++ b/src/scripts/vnet/leftpeer/leftpeer-mpls.conf @@ -0,0 +1,17 @@ +comment { vpe_phase2 configuration } + +comment { local client facing interface on vlan 100 } +comment { configure lc2 eth1 at e.g. 6.0.2.2/24 } + +set int ip table GigabitEthernet2/2/0 1 +set int ip address GigabitEthernet2/2/0 6.0.2.1/24 +set int state GigabitEthernet2/2/0 up + +comment { tunnel to rightpeer on vlan 101 } +set int ip address GigabitEthernet2/3/0 6.0.3.1/24 +set int state GigabitEthernet2/3/0 up + +mpls encap add label 30 fib 1 dest 6.0.3.3 +mpls decap add label 30 fib 1 + +create mpls gre tunnel src 6.0.3.1 dst 6.0.3.3 intfc 6.0.4.1/24 inner-fib-id 1 outer-fib-id 0 diff --git a/src/scripts/vnet/leftpeer/leftpeer-sr.conf b/src/scripts/vnet/leftpeer/leftpeer-sr.conf new file mode 100644 index 00000000..a7b962d3 --- /dev/null +++ b/src/scripts/vnet/leftpeer/leftpeer-sr.conf @@ -0,0 +1,24 @@ +comment { test sr segment chunk-offset on } +test sr hmac validate on + +comment { trunk to rightpeer } +set int ip address GigabitEthernet2/3/0 db03::2/64 +enable ip6 interface GigabitEthernet2/3/0 +set int state GigabitEthernet2/3/0 up + +comment { subscriber linux-ping-source } +set int ip address GigabitEthernet2/2/0 db02::2/64 +enable ip6 interface GigabitEthernet2/2/0 +set int state GigabitEthernet2/2/0 up + +sr hmac id 2 key Gozzer +sr hmac id 3 key Hoser + +sr tunnel src db01::1 dst db04::1/128 next db03::1 next db04::1 tag db02::2 clean key Gozzer InPE 1 + +tap connect srlocal hwaddr random +set int ip6 table tap-0 1 +set int ip address tap-0 db04::99/64 +enable ip6 interface tap-0 +set int state tap-0 up +ip route add table 1 db02::0/64 lookup in table 0 diff --git a/src/scripts/vnet/leftpeer/leftpeer-vxlan.conf b/src/scripts/vnet/leftpeer/leftpeer-vxlan.conf new file mode 100644 index 00000000..d50e8bf4 --- /dev/null +++ b/src/scripts/vnet/leftpeer/leftpeer-vxlan.conf @@ -0,0 +1,17 @@ +comment { tunnel to rightpeer 6.0.3.3 on vlan 101 } + +set int ip address GigabitEthernet2/3/0 6.0.3.1/24 +set int state GigabitEthernet2/3/0 up + +comment { tunnel to thirdpeer 6.0.5.5 on vlan 105 } +set int ip address GigabitEthernet2/7/0 6.0.5.1/24 +set int state GigabitEthernet2/7/0 up + +comment { configure lc2 eth1 at e.g. 6.0.2.2/24 } + +set int ip address GigabitEthernet2/2/0 6.0.2.1/24 +set int state GigabitEthernet2/2/0 up + +vxlan tunnel src 6.0.3.1 peer 6.0.3.3 peer 6.0.3.5 vni 123 +vxlan l2 GigabitEthernet2/2/0 vni 123 + diff --git a/src/scripts/vnet/leftpeer/leftpeer.script b/src/scripts/vnet/leftpeer/leftpeer.script new file mode 100644 index 00000000..f08c8090 --- /dev/null +++ b/src/scripts/vnet/leftpeer/leftpeer.script @@ -0,0 +1,9 @@ +l2tp_set_lookup_key lookup_v6_src + +sw_interface_add_del_address GigabitEthernet2/3/0 db03::2/64 +sw_interface_set_flags GigabitEthernet2/3/0 admin-up + +comment sw_interface_add_del_address GigabitEthernet2/2/0 db02::2/64 +sw_interface_set_flags GigabitEthernet2/2/0 admin-up + +l2tp_session_add_del client_address db03::1 our_address db03::2 GigabitEthernet2/2/0 local_session_id 1 remote_session_id 3 local_cookie 11 remote_cookie 33 diff --git a/src/scripts/vnet/lfib/ip4-to-mpls b/src/scripts/vnet/lfib/ip4-to-mpls new file mode 100644 index 00000000..85753797 --- /dev/null +++ b/src/scripts/vnet/lfib/ip4-to-mpls @@ -0,0 +1,26 @@ +packet-generator new { + name x + limit 1 + node ip4-input + size 64-64 + no-recycle + data { + ICMP: 1.0.0.2 -> 2.2.2.2 + ICMP echo_request + incrementing 100 + } +} + +loop create +loop create +set int state loop0 up +set int state loop1 up + +set int ip address loop0 1.0.0.1/24 +set int ip address loop1 2.0.0.1/24 + +set ip arp static loop1 2.0.0.2 dead.beef.babe +set int mpls loop1 enable +ip route add 2.2.2.2/32 via 2.0.0.2 loop1 out-label 33 + +trace add pg-input 100 diff --git a/src/scripts/vnet/lfib/mpls-pop-to-mpls b/src/scripts/vnet/lfib/mpls-pop-to-mpls new file mode 100644 index 00000000..2818ac13 --- /dev/null +++ b/src/scripts/vnet/lfib/mpls-pop-to-mpls @@ -0,0 +1,28 @@ +packet-generator new { + name x + limit 1 + node mpls-input + size 72-72 + no-recycle + data { + hex 0x0001e0ff0001f1ff4500004000000000400177ba010000020202020208007a6e000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f2021222324252627 + } +} + +loop create +loop create +set int state loop0 up +set int state loop1 up + +set int ip address loop0 1.0.0.1/24 +set int ip address loop1 2.0.0.1/24 + +set ip arp static loop1 2.0.0.2 dead.beef.babe +set int mpls loop1 enable + +ip route add 2.2.2.2/32 via 2.0.0.2 loop1 out-label 33 + +mpls local-label add 30 non-eos mpls-lookup-in-table 0 +mpls local-label add 31 2.2.2.2/32 + +trace add pg-input 100 diff --git a/src/scripts/vnet/lfib/mpls-to-ip4 b/src/scripts/vnet/lfib/mpls-to-ip4 new file mode 100644 index 00000000..24e235e0 --- /dev/null +++ b/src/scripts/vnet/lfib/mpls-to-ip4 @@ -0,0 +1,27 @@ +packet-generator new { + name x + limit 1 + node mpls-input + size 68-68 + no-recycle + data { + hex 0x0001e1ff4500004000000000400177ba010000020202020208007a6e000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f2021222324252627 + } +} + +loop create +loop create +set int state loop0 up +set int state loop1 up + +set int ip address loop0 1.0.0.1/24 +set int ip address loop1 2.0.0.1/24 + +set ip arp static loop1 2.0.0.2 dead.beef.babe +set int mpls loop1 enable + +ip route add 2.2.2.2/32 via 2.0.0.2 loop1 out-label 33 + +mpls local-label add 30 eos ip4-lookup-in-table 0 + +trace add pg-input 100 diff --git a/src/scripts/vnet/lfib/mpls-to-mpls b/src/scripts/vnet/lfib/mpls-to-mpls new file mode 100644 index 00000000..497dbab3 --- /dev/null +++ b/src/scripts/vnet/lfib/mpls-to-mpls @@ -0,0 +1,26 @@ +packet-generator new { + name x + limit 1 + node mpls-input + size 68-68 + no-recycle + data { + hex 0x0001e1ff4500004000000000400177ba010000020200000208007a6e000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f2021222324252627 + } +} + +loop create +loop create +set int state loop0 up +set int state loop1 up + +set int ip address loop0 1.0.0.1/24 +set int ip address loop1 2.0.0.1/24 + +set ip arp static loop1 2.0.0.2 dead.beef.babe +set int mpls loop1 enable + +ip route add 2.2.2.2/32 via 2.0.0.2 loop1 out-label 33 +mpls local-label add 30 2.2.2.2/32 + +trace add pg-input 100 diff --git a/src/scripts/vnet/mcast/ip4 b/src/scripts/vnet/mcast/ip4 new file mode 100644 index 00000000..eb6bab27 --- /dev/null +++ b/src/scripts/vnet/mcast/ip4 @@ -0,0 +1,25 @@ +packet-generator new { + name x + limit 1 + node ip4-input + size 512-512 + no-recycle + data { + ICMP: 1.0.0.2 -> 232.1.1.1 + ICMP echo_request + incrementing 100 + } +} + +create packet-generator interface pg1 +create packet-generator interface pg2 +create packet-generator interface pg3 + +set int state pg1 up +set int state pg2 up +set int state pg3 up + +ip mroute add 232.1.1.1 via pg0 Accept +ip mroute add 232.1.1.1 via pg1 Forward +ip mroute add 232.1.1.1 via pg2 Forward +ip mroute add 232.1.1.1 via pg3 Forward diff --git a/src/scripts/vnet/mpls-o-ethernet/leftpeer.conf b/src/scripts/vnet/mpls-o-ethernet/leftpeer.conf new file mode 100644 index 00000000..dd37b942 --- /dev/null +++ b/src/scripts/vnet/mpls-o-ethernet/leftpeer.conf @@ -0,0 +1,17 @@ +comment { vpe_phase2 configuration } + +comment { local client facing interface } +comment { configure lc2 eth1 at e.g. 6.0.2.2/24 } + +set int ip table GigabitEthernet2/2/0 1 +set int ip address GigabitEthernet2/2/0 6.0.2.1/24 +set int state GigabitEthernet2/2/0 up + +comment { tunnel to rightpeer } +set int ip address GigabitEthernet2/3/0 6.0.3.1/24 +set int state GigabitEthernet2/3/0 up + +mpls encap add label 30 fib 1 dest 6.0.4.1 +mpls decap add label 30 fib 1 + +create mpls ethernet tunnel dst 00:50:56:b7:05:cb adj 6.0.4.1/24 tx-intfc GigabitEthernet2/3/0 fib-id 1 diff --git a/src/scripts/vnet/mpls-o-ethernet/pg b/src/scripts/vnet/mpls-o-ethernet/pg new file mode 100644 index 00000000..ba5397f7 --- /dev/null +++ b/src/scripts/vnet/mpls-o-ethernet/pg @@ -0,0 +1,10 @@ +packet-generator new { + name x + limit 1 + node mpls-ethernet-input + size 68-68 + no-recycle + data { + hex 0x0001e1ff4500004000000000400177ba010000020200000208007a6e000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f2021222324252627 + } +}
\ No newline at end of file diff --git a/src/scripts/vnet/mpls-o-ethernet/rightpeer.conf b/src/scripts/vnet/mpls-o-ethernet/rightpeer.conf new file mode 100644 index 00000000..7709ce4d --- /dev/null +++ b/src/scripts/vnet/mpls-o-ethernet/rightpeer.conf @@ -0,0 +1,15 @@ +comment { local client facing interface } +comment { configure lc4 eth1 at e.g. 6.0.4.4/24 } + +set int ip table GigabitEthernet2/4/0 1 +set int ip address GigabitEthernet2/4/0 6.0.4.1/24 +set int state GigabitEthernet2/4/0 up + +comment { tunnel to leftpeer } +set int ip address GigabitEthernet2/3/0 6.0.3.3/24 +set int state GigabitEthernet2/3/0 up + +mpls encap add label 30 fib 1 dest 6.0.2.1 +mpls decap add label 30 fib 1 + +create mpls ethernet tunnel dst 00:50:56:b7:05:bf adj 6.0.2.1/24 tx-intfc GigabitEthernet2/3/0 fib-id 1 diff --git a/src/scripts/vnet/mpls-o-ethernet/single.conf b/src/scripts/vnet/mpls-o-ethernet/single.conf new file mode 100644 index 00000000..2a25d355 --- /dev/null +++ b/src/scripts/vnet/mpls-o-ethernet/single.conf @@ -0,0 +1,17 @@ +comment { single node configuration } + +loop create +loop create +set int state loop0 up +set int state loop1 up + +set int ip address loop0 1.0.0.1/24 +set int ip address loop1 2.0.0.1/24 + + +ip route add 2.2.2.2/32 via 2.0.0.2 loop1 + +mpls encap add label 30 fib 0 dest 2.2.2.2 +mpls decap add label 30 fib 0 + +create mpls ethernet tunnel dst 00:50:56:b7:05:cb adj 2.2.2.2/32 tx-intfc loop1 fib-id 0 diff --git a/src/scripts/vnet/mpls-o-gre/dhcpd.conf b/src/scripts/vnet/mpls-o-gre/dhcpd.conf new file mode 100644 index 00000000..f0f659cd --- /dev/null +++ b/src/scripts/vnet/mpls-o-gre/dhcpd.conf @@ -0,0 +1,116 @@ +# +# Sample configuration file for ISC dhcpd for Debian +# +# Attention: If /etc/ltsp/dhcpd.conf exists, that will be used as +# configuration file instead of this file. +# +# + +# The ddns-updates-style parameter controls whether or not the server will +# attempt to do a DNS update when a lease is confirmed. We default to the +# behavior of the version 2 packages ('none', since DHCP v2 didn't +# have support for DDNS.) +ddns-update-style none; + +# option definitions common to all supported networks... +option domain-name "example.org"; +option domain-name-servers ns1.example.org, ns2.example.org; + +default-lease-time 600; +max-lease-time 7200; + +# If this DHCP server is the official DHCP server for the local +# network, the authoritative directive should be uncommented. +#authoritative; + +# Use this to send dhcp log messages to a different log file (you also +# have to hack syslog.conf to complete the redirection). +log-facility local7; + +# No service will be given on this subnet, but declaring it helps the +# DHCP server to understand the network topology. + +#subnet 10.152.187.0 netmask 255.255.255.0 { +#} + +# This is a very basic subnet declaration. + +#subnet 10.254.239.0 netmask 255.255.255.224 { +# range 10.254.239.10 10.254.239.20; +# option routers rtr-239-0-1.example.org, rtr-239-0-2.example.org; +#} + +# This declaration allows BOOTP clients to get dynamic addresses, +# which we don't really recommend. + +#subnet 10.254.239.32 netmask 255.255.255.224 { +# range dynamic-bootp 10.254.239.40 10.254.239.60; +# option broadcast-address 10.254.239.31; +# option routers rtr-239-32-1.example.org; +#} + +# A slightly different configuration for an internal subnet. +#subnet 10.5.5.0 netmask 255.255.255.224 { +# range 10.5.5.26 10.5.5.30; +# option domain-name-servers ns1.internal.example.org; +# option domain-name "internal.example.org"; +# option routers 10.5.5.1; +# option broadcast-address 10.5.5.31; +# default-lease-time 600; +# max-lease-time 7200; +#} + +# Hosts which require special configuration options can be listed in +# host statements. If no address is specified, the address will be +# allocated dynamically (if possible), but the host-specific information +# will still come from the host declaration. + +#host passacaglia { +# hardware ethernet 0:0:c0:5d:bd:95; +# filename "vmunix.passacaglia"; +# server-name "toccata.fugue.com"; +#} + +# Fixed IP addresses can also be specified for hosts. These addresses +# should not also be listed as being available for dynamic assignment. +# Hosts for which fixed IP addresses have been specified can boot using +# BOOTP or DHCP. Hosts for which no fixed address is specified can only +# be booted with DHCP, unless there is an address range on the subnet +# to which a BOOTP client is connected which has the dynamic-bootp flag +# set. +#host fantasia { +# hardware ethernet 08:00:07:26:c0:a5; +# fixed-address fantasia.fugue.com; +#} + +# You can declare a class of clients and then do address allocation +# based on that. The example below shows a case where all clients +# in a certain class get addresses on the 10.17.224/24 subnet, and all +# other clients get addresses on the 10.0.29/24 subnet. + +#class "foo" { +# match if substring (option vendor-class-identifier, 0, 4) = "SUNW"; +#} + +#shared-network 224-29 { +# subnet 10.17.224.0 netmask 255.255.255.0 { +# option routers rtr-224.example.org; +# } +# subnet 10.0.29.0 netmask 255.255.255.0 { +# option routers rtr-29.example.org; +# } +# pool { +# allow members of "foo"; +# range 10.17.224.10 10.17.224.250; +# } +# pool { +# deny members of "foo"; +# range 10.0.29.10 10.0.29.230; +# } +#} +subnet 6.0.0.0 netmask 255.255.0.0 { + range 6.0.2.2 6.0.2.5; + option routers 6.0.2.1; + default-lease-time 15; + max-lease-time 15; +} diff --git a/src/scripts/vnet/mpls-o-gre/leftpeer.conf b/src/scripts/vnet/mpls-o-gre/leftpeer.conf new file mode 100644 index 00000000..149c70c0 --- /dev/null +++ b/src/scripts/vnet/mpls-o-gre/leftpeer.conf @@ -0,0 +1,14 @@ +comment { left linux ping target configure at e.g. 6.0.2.2/24 } + +set int ip table GigabitEthernet2/2/0 1 +set int ip address GigabitEthernet2/2/0 6.0.2.1/24 +set int state GigabitEthernet2/2/0 up + +comment { tunnel to rightpeer } +set int ip address GigabitEthernet2/3/0 6.0.3.1/24 +set int state GigabitEthernet2/3/0 up + +mpls encap add label 30 fib 1 dest 6.0.3.3 +mpls decap add label 30 fib 1 + +create mpls gre tunnel src 6.0.3.1 dst 6.0.3.3 intfc 6.0.4.1/24 inner-fib-id 1 outer-fib-id 0 diff --git a/src/scripts/vnet/mpls-o-gre/rightpeer.conf b/src/scripts/vnet/mpls-o-gre/rightpeer.conf new file mode 100644 index 00000000..b5bb597d --- /dev/null +++ b/src/scripts/vnet/mpls-o-gre/rightpeer.conf @@ -0,0 +1,14 @@ +comment { right linux ping target configure e.g. 6.0.4.4/24 } + +set int ip table GigabitEthernet2/4/0 1 +set int ip address GigabitEthernet2/4/0 6.0.4.1/24 +set int state GigabitEthernet2/4/0 up + +comment { tunnel to leftpeer } +set int ip address GigabitEthernet2/3/0 6.0.3.3/24 +set int state GigabitEthernet2/3/0 up + +mpls encap add label 30 fib 1 dest 6.0.3.1 +mpls decap add label 30 fib 1 + +create mpls gre tunnel src 6.0.3.3 dst 6.0.3.1 intfc 6.0.2.1/24 inner-fib-id 1 outer-fib-id 0 diff --git a/src/scripts/vnet/mpls-tunnel b/src/scripts/vnet/mpls-tunnel new file mode 100644 index 00000000..d04b2970 --- /dev/null +++ b/src/scripts/vnet/mpls-tunnel @@ -0,0 +1,87 @@ +packet-generator new { + name x0 + limit 1 + node ip4-input + size 64-64 + no-recycle + data { + ICMP: 1.0.0.2 -> 2.0.0.2 + ICMP echo_request + incrementing 100 + } +} +packet-generator new { + name x1 + limit 1 + node ip4-input + size 64-64 + no-recycle + data { + ICMP: 1.0.0.2 -> 2.0.1.2 + ICMP echo_request + incrementing 100 + } +} +packet-generator new { + name x2 + limit 1 + node ip4-input + size 64-64 + no-recycle + data { + ICMP: 1.0.0.2 -> 2.0.2.2 + ICMP echo_request + incrementing 100 + } +} +packet-generator new { + name x3 + limit 1 + node ip4-input + size 64-64 + no-recycle + data { + ICMP: 1.0.0.2 -> 2.0.3.2 + ICMP echo_request + incrementing 100 + } +} + + + +trace add pg-input 100 + +loop create +set int state loop0 up + +set int ip address loop0 10.0.0.1/24 +set ip arp loop0 10.0.0.2 00:00:11:aa:bb:cc + +mpls tunnel add via 10.0.0.2 loop0 out-label 33 out-label 34 out-label 35 out-label 36 +set int state mpls-tunnel0 up +set int ip addr mpls-tunnel0 192.168.0.1/32 +ip route add 2.0.0.2/32 via 192.168.0.2 mpls-tunnel0 + + +mpls tunnel add via 10.0.0.2 out-label 33 +set int state mpls-tunnel1 up +set int ip addr mpls-tunnel1 192.168.1.1/32 +ip route add 2.0.1.2/32 via 192.168.1.2 mpls-tunnel1 out-label 99 + +mpls tunnel add via 10.0.0.2 loop0 out-label 3 +set int state mpls-tunnel2 up +set int ip addr mpls-tunnel2 192.168.2.1/32 +ip route add 2.0.2.2/32 via 192.168.2.2 mpls-tunnel2 + + +mpls tunnel add l2-only via 10.0.0.2 loop0 out-label 234 out-label 0 +set int state mpls-tunnel3 up +set int l2 bridge mpls-tunnel3 1 + +loop create +set int ip addr loop1 6.0.1.44/24 +set int l2 bridge loop1 1 bvi +set int l2 learn loop1 disable +set int state loop1 up + +ip route add 2.0.3.2/32 via 6.0.1.45 loop1 diff --git a/src/scripts/vnet/nat44 b/src/scripts/vnet/nat44 new file mode 100644 index 00000000..3292b565 --- /dev/null +++ b/src/scripts/vnet/nat44 @@ -0,0 +1,41 @@ +create packet-generator interface pg0 +create packet-generator interface pg1 + +packet-generator new { + name f1 + limit 1000000 + node ip4-input + size 64-64 + no-recycle + interface pg0 + data { + UDP: 10.0.0.3 -> 172.16.1.2 + UDP: 3000 -> 3001 + length 128 checksum 0 incrementing 1 + } +} + + +packet-generator new { + name f2 + limit 1000000 + node ip4-input + size 64-64 + no-recycle + interface pg0 + data { + UDP: 10.0.0.3 -> 172.16.1.2 + UDP: 3005 -> 3006 + length 128 checksum 0 incrementing 1 + } +} + +nat44 add address 172.16.1.3 +set int ip address pg0 10.0.0.1/24 +set int ip address pg1 172.16.1.1/24 +set int state pg0 up +set int state pg1 up +set ip arp static pg0 10.0.0.3 abcd.abcd.abcd +set ip arp static pg0 10.0.0.4 abcd.abcd.abcd +set ip arp static pg1 172.16.1.2 cdef.abcd.abcd +set int nat44 in pg0 out pg1 diff --git a/src/scripts/vnet/nat44_det b/src/scripts/vnet/nat44_det new file mode 100644 index 00000000..629772e6 --- /dev/null +++ b/src/scripts/vnet/nat44_det @@ -0,0 +1,108 @@ +create packet-generator interface pg0 +create packet-generator interface pg1 + +packet-generator new { + name f1 + limit 1000000 + node ip4-input + size 64-64 + no-recycle + worker 0 + interface pg0 + data { + UDP: 10.0.0.3 -> 172.16.1.2 + UDP: 3000 -> 3001 + length 128 checksum 0 incrementing 1 + } +} + + +packet-generator new { + name f2 + limit 1000000 + node ip4-input + size 64-64 + no-recycle + worker 1 + interface pg0 + data { + UDP: 10.0.0.3 -> 172.16.1.2 + UDP: 3005 -> 3006 + length 128 checksum 0 incrementing 1 + } +} + + +packet-generator new { + name f3 + limit 1000000 + node ip4-input + size 64-64 + no-recycle + worker 0 + interface pg1 + data { + UDP: 172.16.1.2 -> 1.1.1.2 + UDP: 3001 -> 1141 + length 128 checksum 0 incrementing 1 + } +} + + +packet-generator new { + name f4 + limit 1000000 + node ip4-input + size 64-64 + no-recycle + worker 1 + interface pg1 + data { + UDP: 172.16.1.2 -> 1.1.1.2 + UDP: 3006 -> 1146 + length 128 checksum 0 incrementing 1 + } +} + + +packet-generator new { + name f5 + limit 1000000 + node ip4-input + size 64-64 + no-recycle + worker 2 + interface pg0 + data { + UDP: 10.0.0.4 -> 172.16.1.2 + UDP: 3005 -> 3006 + length 128 checksum 0 incrementing 1 + } +} + + +packet-generator new { + name f6 + limit 1000000 + node ip4-input + size 64-64 + no-recycle + worker 1 + interface pg1 + data { + UDP: 172.16.1.2 -> 1.1.1.2 + UDP: 3006 -> 1177 + length 128 checksum 0 incrementing 1 + } +} + +nat44 deterministic add in 10.0.0.0/21 out 1.1.1.2/32 +set int ip address pg0 10.0.0.1/24 +set int ip address pg1 172.16.1.1/24 +set int state pg0 up +set int state pg1 up +set ip arp static pg0 10.0.0.3 abcd.abcd.abcd +set ip arp static pg0 10.0.0.4 abcd.abcd.abcd +set ip arp static pg1 172.16.1.2 cdef.abcd.abcd +set int nat44 in pg0 out pg1 +trace add pg-input 10 diff --git a/src/scripts/vnet/nat44_static b/src/scripts/vnet/nat44_static new file mode 100644 index 00000000..2b8f25ec --- /dev/null +++ b/src/scripts/vnet/nat44_static @@ -0,0 +1,44 @@ +create packet-generator interface pg0 +create packet-generator interface pg1 + +packet-generator new { + name f1 + limit 1000000 + node ip4-input + size 64-64 + no-recycle + worker 0 + interface pg0 + data { + UDP: 10.0.0.3 -> 172.16.1.2 + UDP: 3000 -> 3001 + length 128 checksum 0 incrementing 1 + } +} + + +packet-generator new { + name f2 + limit 1000000 + node ip4-input + size 64-64 + no-recycle + worker 1 + interface pg1 + data { + UDP: 172.16.1.2 -> 172.16.1.3 + UDP: 3001 -> 3000 + length 128 checksum 0 incrementing 1 + } +} + +nat44 add address 172.16.1.3 +nat44 add static mapping local 10.0.0.3 external 172.16.1.3 +set int ip address pg0 10.0.0.1/24 +set int ip address pg1 172.16.1.1/24 +set int state pg0 up +set int state pg1 up +set ip arp static pg0 10.0.0.3 abcd.abcd.abcd +set ip arp static pg1 172.16.1.2 cdef.abcd.abcd +set int nat44 in pg0 out pg1 +trace add pg-input 10 diff --git a/src/scripts/vnet/nat44_static_with_port b/src/scripts/vnet/nat44_static_with_port new file mode 100644 index 00000000..15bef1be --- /dev/null +++ b/src/scripts/vnet/nat44_static_with_port @@ -0,0 +1,44 @@ +create packet-generator interface pg0 +create packet-generator interface pg1 + +packet-generator new { + name f1 + limit 1000000 + node ip4-input + size 64-64 + no-recycle + worker 0 + interface pg0 + data { + UDP: 10.0.0.3 -> 172.16.1.2 + UDP: 3000 -> 3001 + length 128 checksum 0 incrementing 1 + } +} + + +packet-generator new { + name f2 + limit 1000000 + node ip4-input + size 64-64 + no-recycle + worker 1 + interface pg1 + data { + UDP: 172.16.1.2 -> 172.16.1.3 + UDP: 3001 -> 3000 + length 128 checksum 0 incrementing 1 + } +} + +nat44 add address 172.16.1.3 +nat44 add static mapping local 10.0.0.3 3000 external 172.16.1.3 3000 +set int ip address pg0 10.0.0.1/24 +set int ip address pg1 172.16.1.1/24 +set int state pg0 up +set int state pg1 up +set ip arp static pg0 10.0.0.3 abcd.abcd.abcd +set ip arp static pg1 172.16.1.2 cdef.abcd.abcd +set int nat44 in pg0 out pg1 +trace add pg-input 10 diff --git a/src/scripts/vnet/pcap b/src/scripts/vnet/pcap new file mode 100644 index 00000000..692e5f27 --- /dev/null +++ b/src/scripts/vnet/pcap @@ -0,0 +1,18 @@ +packet-generator new { + name x + limit 1 + node ethernet-input + no-recycle + pcap /home/eliot/pcap-data/ISIS_level1_adjacency.cap +} + +packet-generator new { + name y + limit 1 + node hdlc-input + no-recycle + pcap /home/eliot/pcap-data/ISIS_p2p_adjacency.cap +} + +tr add pg-input 10 + diff --git a/src/scripts/vnet/probe4 b/src/scripts/vnet/probe4 new file mode 100644 index 00000000..b530e0db --- /dev/null +++ b/src/scripts/vnet/probe4 @@ -0,0 +1,11 @@ +ethernet create-interfaces +set int state fake-eth0 up +set int ip address fake-eth0 1.0.0.1/24 +comment { error } +comment { ip probe fake-eth0 1.0.0.1 } +comment { ip probe fake-eth0 1.2.3.4 } +comment { error } +comment { ip probe fake-eth0 1.0.0.2 } + + + diff --git a/src/scripts/vnet/probe6 b/src/scripts/vnet/probe6 new file mode 100644 index 00000000..a5490c90 --- /dev/null +++ b/src/scripts/vnet/probe6 @@ -0,0 +1,7 @@ +ethernet create-interfaces +set int state fake-eth0 up +set int ip address fake-eth0 2000::1/64 +comment { ip probe fake-eth0 2000::1 } + + + diff --git a/src/scripts/vnet/rewrite b/src/scripts/vnet/rewrite new file mode 100644 index 00000000..d41b9dbf --- /dev/null +++ b/src/scripts/vnet/rewrite @@ -0,0 +1,62 @@ + + +comment { test ipv4 port/vlan/qinq rewrites by generating arps } + +set int state tuntap-0 down + +set int ip address GigabitEthernet2/2/0 1.2.5.4/24 + +cre sub GigabitEthernet2/2/0 1 dot1q 6 exact-match +set int ip address GigabitEthernet2/2/0.1 1.2.6.4/24 + +cre sub GigabitEthernet2/2/0 2 dot1ad 7 inner-dot1q 8 exact-match +set int ip address GigabitEthernet2/2/0.2 1.2.7.4/24 + +set int state GigabitEthernet2/1/0 up +set int state GigabitEthernet2/2/0 up +set int state GigabitEthernet2/2/0.1 up +set int state GigabitEthernet2/2/0.2 up + +trace add pg-input 2 + +cle er +cle int +cle run + +packet-generator new { + name toport + limit 2 + no-recycle + node ethernet-input + interface GigabitEthernet2/1/0 + data { + IP4: 0050.56b7.7c83 -> 0050.56b7.296d + GRE: 8.0.0.1 -> 1.2.5.6 mpls_unicast + } +} + +packet-generator new { + name tovlan + limit 2 + no-recycle + node ethernet-input + interface GigabitEthernet2/1/0 + data { + IP4: 0050.56b7.7c83 -> 0050.56b7.296d + GRE: 8.0.0.1 -> 1.2.6.6 mpls_unicast + } +} + +packet-generator new { + name toqinq + limit 2 + no-recycle + node ethernet-input + interface GigabitEthernet2/1/0 + data { + IP4: 0050.56b7.7c83 -> 0050.56b7.296d + GRE: 8.0.0.1 -> 1.2.7.6 mpls_unicast + } +} + + diff --git a/src/scripts/vnet/rightpeer/rightpeer-ioam.conf b/src/scripts/vnet/rightpeer/rightpeer-ioam.conf new file mode 100644 index 00000000..3e9a8d34 --- /dev/null +++ b/src/scripts/vnet/rightpeer/rightpeer-ioam.conf @@ -0,0 +1,14 @@ +comment { connects to right ping target eth3 addr db04::4/64 } +set int ip address GigabitEthernet2/4/0 db04::1/64 +set int state GigabitEthernet2/4/0 up + +comment { connects to ioam domain leftpeer addr db03::1/64 } +set int ip address GigabitEthernet2/3/0 db03::3/64 +set int state GigabitEthernet2/3/0 up + +set ip6 neighbor GigabitEthernet2/3/0 db03::1 00:50:56:b7:05:bf +set ip6 neighbor GigabitEthernet2/4/0 db04::4 00:50:56:b7:05:d2 + +ip route add db02::0/64 via db03::1 + +ioam set destination db04::4/128 pop diff --git a/src/scripts/vnet/rightpeer/rightpeer-l3vxlan.conf b/src/scripts/vnet/rightpeer/rightpeer-l3vxlan.conf new file mode 100644 index 00000000..abba1ab0 --- /dev/null +++ b/src/scripts/vnet/rightpeer/rightpeer-l3vxlan.conf @@ -0,0 +1,9 @@ +set int ip address GigabitEthernet2/4/0 6.0.4.1/24 +set int state GigabitEthernet2/4/0 up + +comment { tunnel to leftpeer on vlan 101 } +set int ip address GigabitEthernet2/3/0 6.0.3.3/24 +set int state GigabitEthernet2/3/0 up + +vxlan tunnel src 6.0.3.3 peer 6.0.3.1 vni 123 adj 6.0.2.0/24 + diff --git a/src/scripts/vnet/rightpeer/rightpeer-lisp.conf b/src/scripts/vnet/rightpeer/rightpeer-lisp.conf new file mode 100644 index 00000000..961204a3 --- /dev/null +++ b/src/scripts/vnet/rightpeer/rightpeer-lisp.conf @@ -0,0 +1,16 @@ +comment { local client facing interface } +comment { configure lc4 eth1 at e.g. 6.0.4.4/24 } + +set int ip address GigabitEthernet2/4/0 6.0.4.1/24 +set int state GigabitEthernet2/4/0 up + +comment { tunnel to leftpeer } +set int ip address GigabitEthernet2/3/0 6.0.3.3/24 +set int state GigabitEthernet2/3/0 up + +lisp gpe tunnel src 6.0.3.3 dst 6.0.3.1 next-ip4 decap-next ip4 iid 3311 +set int ip address lisp_gpe_tunnel0 6.0.2.3/24 +set int state lisp_gpe_tunnel0 up + +lisp gpe tunnel src 6.0.3.1 dst 6.0.3.3 next-ip4 decap-next ip4 iid 1133 +set int state lisp_gpe_tunnel1 up diff --git a/src/scripts/vnet/rightpeer/rightpeer-mpls-l2.conf b/src/scripts/vnet/rightpeer/rightpeer-mpls-l2.conf new file mode 100644 index 00000000..0ce38583 --- /dev/null +++ b/src/scripts/vnet/rightpeer/rightpeer-mpls-l2.conf @@ -0,0 +1,24 @@ +comment { vpe_phase1d configuration } + +comment { local client facing interface } +comment { configure lc4 eth1 at e.g. 6.0.4.4/24 } + +set int ip table GigabitEthernet2/4/0 1 +set int ip address GigabitEthernet2/4/0 6.0.4.1/24 +set int state GigabitEthernet2/4/0 up + +comment { tunnel to leftpeer } +set int ip address GigabitEthernet2/3/0 6.0.3.3/24 +set int state GigabitEthernet2/3/0 up + +mpls encap add label 30 fib 1 dest 6.0.3.1 +mpls decap add label 30 next output GigabitEthernet2/4/0 + +comment { create mpls gre tunnel src 6.0.3.3 dst 6.0.3.1 intfc 6.0.2.1/24 inner-fib-id 1 outer-fib-id 0 l2-only } + +comment {set int l2 xconnect GigabitEthernet2/4/0 mpls-gre0 } + +uncomment { create mpls ethernet tunnel dst 00:50:56:b7:05:bf adj 6.0.3.1/8 l2-only tx-intfc GigabitEthernet2/3/0 fib-id 1 } + +uncomment { set int l2 xconnect GigabitEthernet2/4/0 mpls-eth0 } + diff --git a/src/scripts/vnet/rightpeer/rightpeer-mpls.conf b/src/scripts/vnet/rightpeer/rightpeer-mpls.conf new file mode 100644 index 00000000..fc97ba16 --- /dev/null +++ b/src/scripts/vnet/rightpeer/rightpeer-mpls.conf @@ -0,0 +1,17 @@ +comment { vpe_phase1d configuration } + +comment { local client facing interface } +comment { configure lc4 eth1 at e.g. 6.0.4.4/24 } + +set int ip table GigabitEthernet2/4/0 1 +set int ip address GigabitEthernet2/4/0 6.0.4.1/24 +set int state GigabitEthernet2/4/0 up + +comment { tunnel to leftpeer } +set int ip address GigabitEthernet2/3/0 6.0.3.3/24 +set int state GigabitEthernet2/3/0 up + +mpls encap add label 30 fib 1 dest 6.0.3.1 +mpls decap add label 30 fib 1 + +create mpls gre tunnel src 6.0.3.3 dst 6.0.3.1 intfc 6.0.2.1/24 inner-fib-id 1 outer-fib-id 0 diff --git a/src/scripts/vnet/rightpeer/rightpeer-sr.conf b/src/scripts/vnet/rightpeer/rightpeer-sr.conf new file mode 100644 index 00000000..0b2a98bb --- /dev/null +++ b/src/scripts/vnet/rightpeer/rightpeer-sr.conf @@ -0,0 +1,28 @@ +comment { test sr segment chunk-offset on } +test sr hmac validate on + +comment { trunk to leftpeer } +set int ip address GigabitEthernet2/3/0 db03::1/64 +enable ip6 interface GigabitEthernet2/3/0 +set int state GigabitEthernet2/3/0 up + +comment { subscriber right peer target } +set int ip address GigabitEthernet2/4/0 db04::2/64 + +comment { next address to fake out ND on shared LAN segment } +comment { set int ip address GigabitEthernet2/4/0 db02::13/64 } + +enable ip6 interface GigabitEthernet2/4/0 +set int state GigabitEthernet2/4/0 up + +sr hmac id 2 key Gozzer +sr hmac id 3 key Hoser + +sr tunnel src db04::1 dst db02::1/128 next db03::2 next db02::1 tag db04::2 clean key Hoser + +tap connect srlocal hwaddr random +set int ip6 table tap-0 1 +set int ip address tap-0 db04::99/64 +enable ip6 interface tap-0 +set int state tap-0 up +ip route add table 1 db02::0/64 lookup in table 0 diff --git a/src/scripts/vnet/rightpeer/rightpeer-vxlan.conf b/src/scripts/vnet/rightpeer/rightpeer-vxlan.conf new file mode 100644 index 00000000..bd4c427e --- /dev/null +++ b/src/scripts/vnet/rightpeer/rightpeer-vxlan.conf @@ -0,0 +1,16 @@ + +comment { local client facing interface } + +comment { configure client lc4 eth1 } +set int state GigabitEthernet2/4/0 up + +comment { tunnel to leftpeer } +set int ip address GigabitEthernet2/3/0 6.0.3.3/24 +set int state GigabitEthernet2/3/0 up + +comment { tunnel to extra ping target } +set int ip address GigabitEthernet2/7/0 6.0.5.3/24 +set int state GigabitEthernet2/3/0 up + +vxlan tunnel src 6.0.3.3 peer 6.0.3.1 peer 6.0.3.5 vni 123 +vxlan l2 GigabitEthernet2/4/0 vni 123 diff --git a/src/scripts/vnet/rightpeer/rightpeer.script b/src/scripts/vnet/rightpeer/rightpeer.script new file mode 100644 index 00000000..153988ce --- /dev/null +++ b/src/scripts/vnet/rightpeer/rightpeer.script @@ -0,0 +1,9 @@ +l2tp_set_lookup_key lookup_v6_src + +sw_interface_add_del_address GigabitEthernet2/3/0 db03::1/64 +sw_interface_set_flags GigabitEthernet2/3/0 admin-up + +comment sw_interface_add_del_address GigabitEthernet2/4/0 db02::2/64 +sw_interface_set_flags GigabitEthernet2/4/0 admin-up + +l2tp_session_add_del client_address db03::2 our_address db03::1 GigabitEthernet2/4/0 local_session_id 3 remote_session_id 1 local_cookie 33 remote_cookie 11 diff --git a/src/scripts/vnet/rpf b/src/scripts/vnet/rpf new file mode 100644 index 00000000..571c6b79 --- /dev/null +++ b/src/scripts/vnet/rpf @@ -0,0 +1,18 @@ +packet-generator new { + name x + limit 1 + node ip4-input + size 64-64 + no-recycle + data { + ICMP: 1.2.3.4 -> 5.6.7.8 + ICMP echo_request + incrementing 100 + } +} + +tr add pg-input 100 +set interface ip source-check pg/stream-0 +ip route 1.2.3.4/32 via pg/stream-0 0x01020304 +ip route 5.6.7.8/32 via drop + diff --git a/src/scripts/vnet/rtt-test b/src/scripts/vnet/rtt-test new file mode 100644 index 00000000..5501b99d --- /dev/null +++ b/src/scripts/vnet/rtt-test @@ -0,0 +1,31 @@ +set int state TenGigabitEthernet4/0/0 up +set int state TenGigabitEthernet5/0/0 up + +set int ip address TenGigabitEthernet4/0/0 1.0.0.1/24 +set int ip address TenGigabitEthernet5/0/0 2.0.0.1/24 + +ip route table 0 1.0.0.2/32 via TenGigabitEthernet4/0/0 IP4: 00:1b:21:74:5b:04 -> 00:1b:21:79:8e:bc +ip route table 0 2.0.0.2/32 via TenGigabitEthernet5/0/0 IP4: 00:1b:21:79:8e:bc -> 00:1b:21:74:5b:04 +ip route table 1 2.0.0.2/32 via local +ip route table 1 1.0.0.2/32 via local + +set int ip table TenGigabitEthernet5/0/0 1 +set int ip table TenGigabitEthernet4/0/0 1 + +comment { trace add rtt-test-tx 100 } +comment { trace add ixge-input 100 } +comment { te rtt { 1.0.0.2 -> 2.0.0.2 count 1e4 rate 1e9 size 100 histogram-time 1e-5 } } + +packet-generator new { + name x + limit 1 + node ip4-input + size 170-170 + data { + ICMP: 1.0.0.2 -> 2.0.0.2 + ICMP echo_request + incrementing 100 + } +} + + diff --git a/src/scripts/vnet/source_and_port_range_check b/src/scripts/vnet/source_and_port_range_check new file mode 100644 index 00000000..dce227b4 --- /dev/null +++ b/src/scripts/vnet/source_and_port_range_check @@ -0,0 +1,63 @@ + +create loop int + +set int state loop0 up +set int ip addr loop0 10.10.10.10/32 + +packet-generator new { + name deny-from-default-route + limit 1 + node ip4-input + size 64-64 + no-recycle + data { + UDP: 1.2.3.4 -> 5.6.7.8 + UDP: 3000 -> 3001 + length 128 checksum 0 incrementing 1 + } +} + +packet-generator new { + name allow + limit 1 + node ip4-input + size 64-64 + no-recycle + data { + UDP: 1.1.1.1 -> 5.6.7.8 + UDP: 3000 -> 3001 + length 128 checksum 0 incrementing 1 + } +} + +packet-generator new { + name deny-from-port-range + limit 1 + node ip4-input + size 64-64 + no-recycle + data { + UDP: 1.1.1.1 -> 5.6.7.8 + UDP: 6000 -> 6001 + length 128 checksum 0 incrementing 1 + } +} + +set ip source-and-port-range-check 1.1.1.0/24 range 2000 - 3000 vrf 99 + +set interface ip source-and-port-range-check pg0 udp-out-vrf 99 + + show ip source-and-port-range-check vrf 99 1.1.1.1 + +set ip source-and-port-range-check 1.1.1.0/24 range 4000 - 5000 vrf 99 + +set ip source-and-port-range-check 1.1.2.0/24 range 4000 - 5000 vrf 99 + +show ip source-and-port-range-check vrf 99 1.1.1.1 +show ip source-and-port-range-check vrf 99 1.1.2.1 + +set ip source-and-port-range-check 1.1.2.0/24 range 4000 - 5000 vrf 99 del + +show ip source-and-port-range-check vrf 99 1.1.2.1 + +tr add pg-input 100 diff --git a/src/scripts/vnet/speed b/src/scripts/vnet/speed new file mode 100644 index 00000000..d60d671f --- /dev/null +++ b/src/scripts/vnet/speed @@ -0,0 +1,14 @@ +packet-generator new { + name x + limit 1 + node ip4-input + size 50-50 + data { + ICMP: 1.2.3.4 -> 5.6.7.8 + ICMP echo_request + incrementing 100 + } +} + +tr add pg-input 100 +ip route 5.6.7.8/32 via pg/stream-0 000102030405060708090a0b0c0d diff --git a/src/scripts/vnet/sr/sr_mpls b/src/scripts/vnet/sr/sr_mpls new file mode 100644 index 00000000..4646372a --- /dev/null +++ b/src/scripts/vnet/sr/sr_mpls @@ -0,0 +1,11 @@ +set interface mpls local0 enable +sr mpls policy add bsid 20001 next 16001 next 16002 next 16003 +sr mpls steer l3 a::/112 via sr policy bsid 20001 + +loop create +set int state loop0 up + +set int ip address loop0 11.0.0.1/24 +set ip arp loop0 11.0.0.2 00:00:11:aa:bb:cc + +mpls local-label 16001 via 11.0.0.2 loop0 out-label 16001 diff --git a/src/scripts/vnet/srp b/src/scripts/vnet/srp new file mode 100644 index 00000000..7cc37011 --- /dev/null +++ b/src/scripts/vnet/srp @@ -0,0 +1,27 @@ +srp create-interfaces +srp create-interfaces +set int hw-class fake-srp0 srp +set int hw-class fake-srp1 srp + +packet-generator new { + name x + limit 1 + node ip4-input + size 64-64 + no-recycle + data { + ICMP: 1.0.0.2 -> 2.0.0.2 + ICMP echo_request + incrementing 100 + } +} + +tr add pg-input 100 +set int state fake-srp0 up +set int state fake-srp1 up + +set int ip address fake-srp0 1.0.0.1/24 +set int ip address fake-srp1 2.0.0.1/24 + + + diff --git a/src/scripts/vnet/tcp b/src/scripts/vnet/tcp new file mode 100644 index 00000000..b9c23c3a --- /dev/null +++ b/src/scripts/vnet/tcp @@ -0,0 +1,18 @@ +loop create +set int ip address loop0 192.168.1.1/8 +set int state loop0 up + +packet-generator new { + name x + limit 2048 + node ip4-input + size 100-100 + interface loop0 + no-recycle + data { + TCP: 192.168.1.2 -> 192.168.1.1 + TCP: 32415 -> 80 + SYN + incrementing 100 + } +} diff --git a/src/scripts/vnet/tcp-test b/src/scripts/vnet/tcp-test new file mode 100644 index 00000000..52bfbcdd --- /dev/null +++ b/src/scripts/vnet/tcp-test @@ -0,0 +1,6 @@ +int create-ethernet +set int ip address fake-eth0 1.2.3.4/24 +set int state fake-eth0 up +ip route 1.2.3.5/32 via local +trace add tuntap-rx 100 + diff --git a/src/scripts/vnet/tf-ucs-1 b/src/scripts/vnet/tf-ucs-1 new file mode 100644 index 00000000..efa5f2dc --- /dev/null +++ b/src/scripts/vnet/tf-ucs-1 @@ -0,0 +1,16 @@ +comment { connected to Ixia port 1} +set int ip address TenGigabitEthernet4/0/0 1.0.0.2/8 + +set int state TenGigabitEthernet4/0/0 up + +comment { connected to Ixia port 2} +set int ip address TenGigabitEthernet4/0/1 2.0.0.2/8 +set int state TenGigabitEthernet4/0/1 up + +comment { connected to Ixia port 3} +set int ip address TenGigabitEthernet6/0/0 3.0.0.2/8 +set int state TenGigabitEthernet6/0/0 up + +comment { connected to Ixia port 4} +set int ip address TenGigabitEthernet6/0/1 4.0.0.2/8 +set int state TenGigabitEthernet6/0/1 up diff --git a/src/scripts/vnet/udp b/src/scripts/vnet/udp new file mode 100644 index 00000000..7dda1eec --- /dev/null +++ b/src/scripts/vnet/udp @@ -0,0 +1,19 @@ +loop create +set int ip address loop0 192.168.1.1/8 +set int state loop0 up + +packet-generator new { + name udp + limit 512 + rate 1e4 + node ip4-input + size 100-100 + interface loop0 + no-recycle + data { + UDP: 192.168.1.2 - 192.168.2.255 -> 192.168.1.1 + UDP: 4321 -> 1234 + length 72 + incrementing 100 + } +} diff --git a/src/scripts/vnet/uri/afp_setup.cli b/src/scripts/vnet/uri/afp_setup.cli new file mode 100644 index 00000000..c29afc6f --- /dev/null +++ b/src/scripts/vnet/uri/afp_setup.cli @@ -0,0 +1,5 @@ +create host-interface name vpp1 +set int state host-vpp1 up +set int ip address host-vpp1 6.0.1.1/24 +trace add af-packet-input 10 +session enable diff --git a/src/scripts/vnet/uri/dpdk_setup.cli b/src/scripts/vnet/uri/dpdk_setup.cli new file mode 100644 index 00000000..02bba58f --- /dev/null +++ b/src/scripts/vnet/uri/dpdk_setup.cli @@ -0,0 +1,4 @@ +set int state GigabitEthernet1b/0/0 up +set int ip address GigabitEthernet1b/0/0 6.0.1.1/24 +trace add dpdk-input 10 +session enable diff --git a/src/scripts/vnet/uri/dummy_app.py b/src/scripts/vnet/uri/dummy_app.py new file mode 100644 index 00000000..ff00f2fc --- /dev/null +++ b/src/scripts/vnet/uri/dummy_app.py @@ -0,0 +1,100 @@ +#!/usr/bin/env python + +import socket +import sys +import time + +# action can be reflect or drop +action = "drop" +test = 0 + +def test_data (data, n_rcvd): + n_read = len (data); + for i in range(n_read): + expected = (n_rcvd + i) & 0xff + byte_got = ord (data[i]) + if (byte_got != expected): + print("Difference at byte {}. Expected {} got {}" + .format(n_rcvd + i, expected, byte_got)) + return n_read + +def handle_connection (connection, client_address): + print("Received connection from {}".format(repr(client_address))) + n_rcvd = 0 + try: + while True: + data = connection.recv(4096) + if not data: + break; + if (test == 1): + n_rcvd += test_data (data, n_rcvd) + if (action != "drop"): + connection.sendall(data) + finally: + connection.close() + +def run_server(ip, port): + print("Starting server {}:{}".format(repr(ip), repr(port))) + sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM) + sock.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1) + server_address = (ip, int(port)) + sock.bind(server_address) + sock.listen(1) + + while True: + connection, client_address = sock.accept() + handle_connection (connection, client_address) + +def prepare_data(): + buf = [] + for i in range (0, pow(2, 16)): + buf.append(i & 0xff) + return bytearray(buf) + +def run_client(ip, port): + print("Starting client {}:{}".format(repr(ip), repr(port))) + sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM) + server_address = (ip, port) + sock.connect(server_address) + + data = prepare_data() + n_rcvd = 0 + n_sent = len (data) + try: + sock.sendall(data) + + timeout = time.time() + 2 + while n_rcvd < n_sent and time.time() < timeout: + tmp = sock.recv(1500) + tmp = bytearray (tmp) + n_read = len(tmp) + for i in range(n_read): + if (data[n_rcvd + i] != tmp[i]): + print("Difference at byte {}. Sent {} got {}" + .format(n_rcvd + i, data[n_rcvd + i], tmp[i])) + n_rcvd += n_read + + if (n_rcvd < n_sent or n_rcvd > n_sent): + print("Sent {} and got back {}".format(n_sent, n_rcvd)) + else: + print("Got back what we've sent!!"); + + finally: + sock.close() + +def run(mode, ip, port): + if (mode == "server"): + run_server (ip, port) + elif (mode == "client"): + run_client (ip, port) + else: + raise Exception("Unknown mode. Only client and server supported") + +if __name__ == "__main__": + if (len(sys.argv)) < 4: + raise Exception("Usage: ./dummy_app <mode> <ip> <port> [<action> <test>]") + if (len(sys.argv) == 6): + action = sys.argv[4] + test = int(sys.argv[5]) + + run (sys.argv[1], sys.argv[2], int(sys.argv[3])) diff --git a/src/scripts/vnet/uri/tap_setup.cli b/src/scripts/vnet/uri/tap_setup.cli new file mode 100644 index 00000000..1d9a1b36 --- /dev/null +++ b/src/scripts/vnet/uri/tap_setup.cli @@ -0,0 +1,5 @@ +tap connect tap0 address 6.0.1.2/24 +set int ip addr tap-0 6.0.1.1/24 +set int state tap-0 up +trace add tapcli-rx 10 +session enable diff --git a/src/scripts/vnet/uri/tcp-setup.sh b/src/scripts/vnet/uri/tcp-setup.sh new file mode 100755 index 00000000..e0b01588 --- /dev/null +++ b/src/scripts/vnet/uri/tcp-setup.sh @@ -0,0 +1,39 @@ +#!/usr/bin/env bash + +function topo_setup +{ + ip netns add vppns1 + ip link add veth_vpp1 type veth peer name vpp1 + ip link set dev vpp1 up + ip link set dev veth_vpp1 up netns vppns1 + + ip netns exec vppns1 \ + bash -c " + ip link set dev lo up + ip addr add 6.0.1.2/24 dev veth_vpp1 + " + + ethtool --offload vpp1 rx off tx off + ip netns exec vppns1 ethtool --offload veth_vpp1 rx off tx off + +} + +function topo_clean +{ + ip link del dev veth_vpp1 &> /dev/null + ip netns del vppns1 &> /dev/null +} + +if [ "$1" == "clean" ] ; then + topo_clean + exit 0 +else + topo_setup +fi + +# to test connectivity do: +# sudo ip netns exec vppns1 telnet 6.0.1.1 1234 +# to push traffic to the server +# dd if=/dev/zero bs=1024K count=512 | nc 6.0.1.1 +# to listen for incoming connection from vpp +# nc -l 1234 diff --git a/src/scripts/vnet/uri/udp b/src/scripts/vnet/uri/udp new file mode 100644 index 00000000..c7628f49 --- /dev/null +++ b/src/scripts/vnet/uri/udp @@ -0,0 +1,20 @@ +loop create +set int ip address loop0 6.0.0.1/32 +set int state loop0 up + +packet-generator new { + name udp + limit 512 + rate 1e4 + node ip4-input + size 100-100 + interface loop0 + no-recycle + data { + UDP: 192.168.1.2 - 192.168.2.255 -> 192.168.1.1 + UDP: 4321 -> 1234 + length 72 + incrementing 100 + } +} +session enable diff --git a/src/scripts/vnet/urpf b/src/scripts/vnet/urpf new file mode 100644 index 00000000..a4d87527 --- /dev/null +++ b/src/scripts/vnet/urpf @@ -0,0 +1,86 @@ + +create loop int + +set int state loop0 up +set int ip addr loop0 10.10.10.10/24 + +packet-generator new { + name transit-deny + limit 1 + node ip4-input + size 64-64 + no-recycle + data { + UDP: 1.2.3.4 -> 2.2.2.2 + UDP: 3000 -> 3001 + length 128 checksum 0 incrementing 1 + } +} + +packet-generator new { + name transit-allow + limit 1 + node ip4-input + size 64-64 + no-recycle + data { + UDP: 1.1.1.1 -> 2.2.2.2 + UDP: 3000 -> 3001 + length 128 checksum 0 incrementing 1 + } +} + +packet-generator new { + name transit-allow-from-excemption + limit 1 + node ip4-input + size 64-64 + no-recycle + data { + UDP: 11.11.12.13 -> 2.2.2.2 + UDP: 6000 -> 6001 + length 128 checksum 0 incrementing 1 + } +} + +packet-generator new { + name for-us-allow-from-excemption + limit 1 + node ip4-input + size 64-64 + no-recycle + data { + UDP: 11.11.12.13 -> 10.10.10.10 + UDP: 6000 -> 6001 + length 128 checksum 0 incrementing 1 + } +} + +packet-generator new { + name for-us-allow + limit 1 + node ip4-input + size 64-64 + no-recycle + data { + UDP: 1.1.1.1 -> 10.10.10.10 + UDP: 3000 -> 3001 + length 128 checksum 0 incrementing 1 + } +} + +tr add pg-input 100 + +set int ip addr pg0 10.10.11.10/24 + +set interface ip source-check pg0 strict + +ip route add 1.1.1.1/32 via 10.10.11.11 pg0 +ip route add 2.2.2.2/32 via 10.10.10.11 loop0 + +ip urpf-accept 11.11.0.0/16 + +#set interface ip source-check pg0 strict del +#set interface ip source-check pg0 loose + +#ip urpf-accept del 11.11.0.0/16 diff --git a/src/scripts/vnet/virl/ip6sr.virl b/src/scripts/vnet/virl/ip6sr.virl new file mode 100644 index 00000000..5d4d1a0a --- /dev/null +++ b/src/scripts/vnet/virl/ip6sr.virl @@ -0,0 +1,874 @@ +<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
+<topology xmlns="http://www.cisco.com/VIRL" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" schemaVersion="0.9" xsi:schemaLocation="http://www.cisco.com/VIRL https://raw.github.com/CiscoVIRL/schema/v0.9/virl.xsd">
+ <extensions>
+ <entry key="management_network" type="String">flat</entry>
+ <entry key="AutoNetkit.address_family" type="String">dual_stack</entry>
+ <entry key="AutoNetkit.enable_routing" type="Boolean">false</entry>
+ </extensions>
+ <node name="iosv-1" type="SIMPLE" subtype="IOSv" location="195,78" ipv4="192.168.0.2" ipv6="::b:1:0:0:2">
+ <extensions>
+ <entry key="config" type="string">!
+! Last configuration change at 16:41:18 UTC Fri Mar 27 2015
+!
+version 15.4
+service timestamps debug datetime msec
+service timestamps log datetime msec
+no service password-encryption
+!
+hostname iosv-1
+!
+boot-start-marker
+boot-end-marker
+!
+!
+enable password cisco
+!
+no aaa new-model
+!
+!
+!
+mmi polling-interval 60
+no mmi auto-configure
+no mmi pvc
+mmi snmp-timeout 180
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+no ip domain lookup
+ip cef
+ipv6 unicast-routing
+ipv6 cef
+!
+multilink bundle-name authenticated
+!
+!
+cts logging verbose
+!
+!
+!
+redundancy
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+interface Loopback0
+ description Loopback
+ ip address 192.168.0.2 255.255.255.255
+ ipv6 address ::B:1:0:0:2/128
+!
+interface GigabitEthernet0/0
+ description OOB Management
+ ip address 172.16.1.193 255.255.255.0
+ duplex auto
+ speed auto
+ media-type rj45
+!
+interface GigabitEthernet0/1
+ description to vpp-1
+ ip address 10.0.0.5 255.255.255.252
+ duplex auto
+ speed auto
+ media-type rj45
+ ipv6 address ::A:1:1:0:6/126
+!
+ip forward-protocol nd
+!
+!
+no ip http server
+no ip http secure-server
+!
+! route to iosv-2
+ipv6 route ::A:1:1:0:16/128 ::A:1:1:0:7
+! route to iosv-4
+ipv6 route ::A:1:1:0:22/128 ::A:1:1:0:7
+!
+!
+!
+control-plane
+!
+banner exec `
+**************************************************************************
+* IOSv is strictly limited to use for evaluation, demonstration and IOS *
+* education. IOSv is provided as-is and is not supported by Cisco's *
+* Technical Advisory Center. Any use or disclosure, in whole or in part, *
+* of the IOSv Software or Documentation to any third party for any *
+* purposes is expressly prohibited except as otherwise authorized by *
+* Cisco in writing. *
+**************************************************************************`
+banner incoming `
+**************************************************************************
+* IOSv is strictly limited to use for evaluation, demonstration and IOS *
+* education. IOSv is provided as-is and is not supported by Cisco's *
+* Technical Advisory Center. Any use or disclosure, in whole or in part, *
+* of the IOSv Software or Documentation to any third party for any *
+* purposes is expressly prohibited except as otherwise authorized by *
+* Cisco in writing. *
+**************************************************************************`
+banner login `
+**************************************************************************
+* IOSv is strictly limited to use for evaluation, demonstration and IOS *
+* education. IOSv is provided as-is and is not supported by Cisco's *
+* Technical Advisory Center. Any use or disclosure, in whole or in part, *
+* of the IOSv Software or Documentation to any third party for any *
+* purposes is expressly prohibited except as otherwise authorized by *
+* Cisco in writing. *
+**************************************************************************`
+!
+line con 0
+ password cisco
+line aux 0
+line vty 0 4
+ exec-timeout 720 0
+ password cisco
+ login
+ transport input telnet ssh
+!
+no scheduler allocate
+!
+end</entry>
+ <entry key="AutoNetkit.mgmt_ip" type="string"></entry>
+ </extensions>
+ <interface id="0" name="GigabitEthernet0/1" ipv4="10.0.0.5" ipv6="::a:1:1:0:6" netPrefixLenV4="30" netPrefixLenV6="126"/>
+ </node>
+ <node name="iosv-2" type="SIMPLE" subtype="IOSv" location="667,82" ipv4="192.168.0.3" ipv6="::b:1:0:0:3">
+ <extensions>
+ <entry key="config" type="string">!
+! Last configuration change at 16:41:10 UTC Fri Mar 27 2015
+!
+version 15.4
+service timestamps debug datetime msec
+service timestamps log datetime msec
+no service password-encryption
+!
+hostname iosv-2
+!
+boot-start-marker
+boot-end-marker
+!
+!
+enable password cisco
+!
+no aaa new-model
+!
+!
+!
+mmi polling-interval 60
+no mmi auto-configure
+no mmi pvc
+mmi snmp-timeout 180
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+no ip domain lookup
+ip cef
+ipv6 unicast-routing
+ipv6 cef
+!
+multilink bundle-name authenticated
+!
+!
+cts logging verbose
+!
+!
+!
+redundancy
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+interface Loopback0
+ description Loopback
+ ip address 192.168.0.3 255.255.255.255
+ ipv6 address ::B:1:0:0:3/128
+!
+interface GigabitEthernet0/0
+ description OOB Management
+ ip address 172.16.1.191 255.255.255.0
+ duplex auto
+ speed auto
+ media-type rj45
+!
+interface GigabitEthernet0/1
+ description to vpp-2
+ ip address 10.0.0.21 255.255.255.252
+ duplex auto
+ speed auto
+ media-type rj45
+ ipv6 address ::A:1:1:0:16/126
+!
+ip forward-protocol nd
+!
+!
+no ip http server
+no ip http secure-server
+!
+ipv6 route ::A:1:1:0:6/128 ::A:1:1:0:17
+!
+!
+!
+control-plane
+!
+banner exec `
+**************************************************************************
+* IOSv is strictly limited to use for evaluation, demonstration and IOS *
+* education. IOSv is provided as-is and is not supported by Cisco's *
+* Technical Advisory Center. Any use or disclosure, in whole or in part, *
+* of the IOSv Software or Documentation to any third party for any *
+* purposes is expressly prohibited except as otherwise authorized by *
+* Cisco in writing. *
+**************************************************************************`
+banner incoming `
+**************************************************************************
+* IOSv is strictly limited to use for evaluation, demonstration and IOS *
+* education. IOSv is provided as-is and is not supported by Cisco's *
+* Technical Advisory Center. Any use or disclosure, in whole or in part, *
+* of the IOSv Software or Documentation to any third party for any *
+* purposes is expressly prohibited except as otherwise authorized by *
+* Cisco in writing. *
+**************************************************************************`
+banner login `
+**************************************************************************
+* IOSv is strictly limited to use for evaluation, demonstration and IOS *
+* education. IOSv is provided as-is and is not supported by Cisco's *
+* Technical Advisory Center. Any use or disclosure, in whole or in part, *
+* of the IOSv Software or Documentation to any third party for any *
+* purposes is expressly prohibited except as otherwise authorized by *
+* Cisco in writing. *
+**************************************************************************`
+!
+line con 0
+ password cisco
+line aux 0
+line vty 0 4
+ exec-timeout 720 0
+ password cisco
+ login
+ transport input telnet ssh
+!
+no scheduler allocate
+!
+end</entry>
+ <entry key="AutoNetkit.mgmt_ip" type="string"></entry>
+ </extensions>
+ <interface id="0" name="GigabitEthernet0/1" ipv4="10.0.0.21" ipv6="::a:1:1:0:16" netPrefixLenV4="30" netPrefixLenV6="126"/>
+ </node>
+ <node name="iosv-3" type="SIMPLE" subtype="IOSv" location="194,186" ipv4="192.168.0.6" ipv6="::b:1:0:0:4">
+ <extensions>
+ <entry key="config" type="string">!
+! Last configuration change at 16:27:43 UTC Fri Mar 27 2015
+!
+version 15.4
+service timestamps debug datetime msec
+service timestamps log datetime msec
+no service password-encryption
+!
+hostname iosv-3
+!
+boot-start-marker
+boot-end-marker
+!
+!
+enable password cisco
+!
+no aaa new-model
+!
+!
+!
+mmi polling-interval 60
+no mmi auto-configure
+no mmi pvc
+mmi snmp-timeout 180
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+no ip domain lookup
+ip cef
+ipv6 unicast-routing
+ipv6 cef
+!
+multilink bundle-name authenticated
+!
+!
+cts logging verbose
+!
+!
+!
+redundancy
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+interface Loopback0
+ description Loopback
+ ip address 192.168.0.6 255.255.255.255
+ ipv6 address ::B:1:0:0:4/128
+!
+interface GigabitEthernet0/0
+ description OOB Management
+ ip address 172.16.1.192 255.255.255.0
+ duplex auto
+ speed auto
+ media-type rj45
+!
+interface GigabitEthernet0/1
+ description to vpp-1
+ ip address 10.0.0.9 255.255.255.252
+ duplex auto
+ speed auto
+ media-type rj45
+ ipv6 address ::A:1:1:0:A/126
+!
+ip forward-protocol nd
+!
+!
+no ip http server
+no ip http secure-server
+!
+!
+!
+!
+control-plane
+!
+banner exec `
+**************************************************************************
+* IOSv is strictly limited to use for evaluation, demonstration and IOS *
+* education. IOSv is provided as-is and is not supported by Cisco's *
+* Technical Advisory Center. Any use or disclosure, in whole or in part, *
+* of the IOSv Software or Documentation to any third party for any *
+* purposes is expressly prohibited except as otherwise authorized by *
+* Cisco in writing. *
+**************************************************************************`
+banner incoming `
+**************************************************************************
+* IOSv is strictly limited to use for evaluation, demonstration and IOS *
+* education. IOSv is provided as-is and is not supported by Cisco's *
+* Technical Advisory Center. Any use or disclosure, in whole or in part, *
+* of the IOSv Software or Documentation to any third party for any *
+* purposes is expressly prohibited except as otherwise authorized by *
+* Cisco in writing. *
+**************************************************************************`
+banner login `
+**************************************************************************
+* IOSv is strictly limited to use for evaluation, demonstration and IOS *
+* education. IOSv is provided as-is and is not supported by Cisco's *
+* Technical Advisory Center. Any use or disclosure, in whole or in part, *
+* of the IOSv Software or Documentation to any third party for any *
+* purposes is expressly prohibited except as otherwise authorized by *
+* Cisco in writing. *
+**************************************************************************`
+!
+line con 0
+ password cisco
+line aux 0
+line vty 0 4
+ exec-timeout 720 0
+ password cisco
+ login
+ transport input telnet ssh
+!
+no scheduler allocate
+!
+end</entry>
+ <entry key="AutoNetkit.mgmt_ip" type="string"></entry>
+ </extensions>
+ <interface id="0" name="GigabitEthernet0/1" ipv4="10.0.0.9" ipv6="::a:1:1:0:a" netPrefixLenV4="30" netPrefixLenV6="126"/>
+ </node>
+ <node name="iosv-4" type="SIMPLE" subtype="IOSv" location="668,193" ipv4="192.168.0.8" ipv6="::b:1:0:0:5">
+ <extensions>
+ <entry key="config" type="string">!
+! Last configuration change at 16:27:43 UTC Fri Mar 27 2015
+!
+version 15.4
+service timestamps debug datetime msec
+service timestamps log datetime msec
+no service password-encryption
+!
+hostname iosv-4
+!
+boot-start-marker
+boot-end-marker
+!
+!
+enable password cisco
+!
+no aaa new-model
+!
+!
+!
+mmi polling-interval 60
+no mmi auto-configure
+no mmi pvc
+mmi snmp-timeout 180
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+no ip domain lookup
+ip cef
+ipv6 unicast-routing
+ipv6 cef
+!
+multilink bundle-name authenticated
+!
+!
+cts logging verbose
+!
+!
+!
+redundancy
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+interface Loopback0
+ description Loopback
+ ip address 192.168.0.8 255.255.255.255
+ ipv6 address ::B:1:0:0:5/128
+!
+interface GigabitEthernet0/0
+ description OOB Management
+ ip address 172.16.1.194 255.255.255.0
+ duplex auto
+ speed auto
+ media-type rj45
+!
+interface GigabitEthernet0/1
+ description to vpp-2
+ ip address 10.0.0.33 255.255.255.252
+ duplex auto
+ speed auto
+ media-type rj45
+ ipv6 address ::A:1:1:0:22/126
+!
+! Route to iosv-1
+ipv6 route ::A:1:1:0:6/128 ::A:1:1:0:23
+ip forward-protocol nd
+!
+!
+no ip http server
+no ip http secure-server
+!
+!
+!
+!
+control-plane
+!
+banner exec `
+**************************************************************************
+* IOSv is strictly limited to use for evaluation, demonstration and IOS *
+* education. IOSv is provided as-is and is not supported by Cisco's *
+* Technical Advisory Center. Any use or disclosure, in whole or in part, *
+* of the IOSv Software or Documentation to any third party for any *
+* purposes is expressly prohibited except as otherwise authorized by *
+* Cisco in writing. *
+**************************************************************************`
+banner incoming `
+**************************************************************************
+* IOSv is strictly limited to use for evaluation, demonstration and IOS *
+* education. IOSv is provided as-is and is not supported by Cisco's *
+* Technical Advisory Center. Any use or disclosure, in whole or in part, *
+* of the IOSv Software or Documentation to any third party for any *
+* purposes is expressly prohibited except as otherwise authorized by *
+* Cisco in writing. *
+**************************************************************************`
+banner login `
+**************************************************************************
+* IOSv is strictly limited to use for evaluation, demonstration and IOS *
+* education. IOSv is provided as-is and is not supported by Cisco's *
+* Technical Advisory Center. Any use or disclosure, in whole or in part, *
+* of the IOSv Software or Documentation to any third party for any *
+* purposes is expressly prohibited except as otherwise authorized by *
+* Cisco in writing. *
+**************************************************************************`
+!
+line con 0
+ password cisco
+line aux 0
+line vty 0 4
+ exec-timeout 720 0
+ password cisco
+ login
+ transport input telnet ssh
+!
+no scheduler allocate
+!
+end</entry>
+ <entry key="AutoNetkit.mgmt_ip" type="string"></entry>
+ </extensions>
+ <interface id="0" name="GigabitEthernet0/1" ipv4="10.0.0.33" ipv6="::a:1:1:0:22" netPrefixLenV4="30" netPrefixLenV6="126"/>
+ </node>
+ <node name="vpp-1" type="SIMPLE" subtype="vPP" location="302,140">
+ <extensions>
+ <entry key="config" type="string">#cloud-config
+bootcmd:
+- ln -s -t /etc/rc.d /etc/rc.local
+hostname: vpp-1
+manage_etc_hosts: true
+runcmd:
+- start ttyS0
+- systemctl start getty@ttyS0.service
+- systemctl start rc-local
+- sed -i '/^\s*PasswordAuthentication\s\+no/d' /etc/ssh/sshd_config
+- echo "UseDNS no" >> /etc/ssh/sshd_config
+- service ssh restart
+- service sshd restart
+- sed -i 's/no-pci//' /cisco/etc/qn.conf
+- sed -i 's/1024/1024 decimal-interface-names/g' /cisco/etc/qn.conf
+users:
+- default
+- gecos: User configured by VIRL Configuration Engine 0.15.3
+ lock-passwd: false
+ name: cisco
+ plain-text-passwd: cisco
+ shell: /bin/bash
+ ssh-authorized-keys:
+ - VIRL-USER-SSH-PUBLIC-KEY
+ sudo: ALL=(ALL) ALL
+write_files:
+- path: /etc/init/ttyS0.conf
+ owner: root:root
+ content: |
+ # ttyS0 - getty
+ # This service maintains a getty on ttyS0 from the point the system is
+ # started until it is shut down again.
+ start on stopped rc or RUNLEVEL=[12345]
+ stop on runlevel [!12345]
+ respawn
+ exec /sbin/getty -L 115200 ttyS0 vt102
+ permissions: '0644'
+- path: /etc/systemd/system/dhclient@.service
+ content: |
+ [Unit]
+ Description=Run dhclient on %i interface
+ After=network.target
+ [Service]
+ Type=oneshot
+ ExecStart=/sbin/dhclient %i -pf /var/run/dhclient.%i.pid -lf /var/lib/dhclient/dhclient.%i.lease
+ RemainAfterExit=yes
+ owner: root:root
+ permissions: '0644'
+- path: /cisco/etc/vpp-server.conf
+ owner: root:root
+ permissions: '0644'
+ content: |-
+ set interface ip address GigabitEthernet0/4/0 10.0.0.6/30
+ set interface ip address GigabitEthernet0/4/0 ::a:1:1:0:7/126
+ set interface state GigabitEthernet0/4/0 up
+ set interface ip address GigabitEthernet0/5/0 10.0.0.10/30
+ set interface ip address GigabitEthernet0/5/0 ::a:1:1:0:b/126
+ set interface state GigabitEthernet0/5/0 up
+ set interface ip address GigabitEthernet0/6/0 10.0.0.13/30
+ set interface ip address GigabitEthernet0/6/0 ::a:1:1:0:e/126
+ set interface state GigabitEthernet0/6/0 up
+ set interface ip address GigabitEthernet0/7/0 10.0.0.17/30
+ set interface ip address GigabitEthernet0/7/0 ::a:1:1:0:12/126
+ set interface state GigabitEthernet0/7/0 up
+ sr tunnel src 0::a:1:1:0:6 dst 0::a:1:1:0:16/128 next 0::a:1:1:0:f next 0::a:1:1:0:1a next 0::a:1:1:0:16 tag 0::a:1:1:0:7 InPE 1 clean
+ sr tunnel src 0::a:1:1:0:6 dst 0::a:1:1:0:22/128 next 0::a:1:1:0:f next 0::a:1:1:0:1a next 0::a:1:1:0:22 tag 0::a:1:1:0:7 InPE 1 clean
+</entry>
+ </extensions>
+ <interface id="0" name="GigabitEthernet0/4/0" ipv4="10.0.0.6" ipv6="::a:1:1:0:7" netPrefixLenV4="30" netPrefixLenV6="126"/>
+ <interface id="1" name="GigabitEthernet0/5/0" ipv4="10.0.0.10" ipv6="::a:1:1:0:b" netPrefixLenV4="30" netPrefixLenV6="126"/>
+ <interface id="2" name="GigabitEthernet0/6/0" ipv4="10.0.0.13" ipv6="::a:1:1:0:e" netPrefixLenV4="30" netPrefixLenV6="126"/>
+ <interface id="3" name="GigabitEthernet0/7/0" ipv4="10.0.0.17" ipv6="::a:1:1:0:12" netPrefixLenV4="30" netPrefixLenV6="126"/>
+ </node>
+ <node name="vpp-2" type="SIMPLE" subtype="vPP" location="541,147">
+ <extensions>
+ <entry key="config" type="string">#cloud-config
+bootcmd:
+- ln -s -t /etc/rc.d /etc/rc.local
+hostname: vpp-2
+manage_etc_hosts: true
+runcmd:
+- start ttyS0
+- systemctl start getty@ttyS0.service
+- systemctl start rc-local
+- sed -i '/^\s*PasswordAuthentication\s\+no/d' /etc/ssh/sshd_config
+- echo "UseDNS no" >> /etc/ssh/sshd_config
+- service ssh restart
+- service sshd restart
+- sed -i 's/no-pci//' /cisco/etc/qn.conf
+- sed -i 's/1024/1024 decimal-interface-names/g' /cisco/etc/qn.conf
+users:
+- default
+- gecos: User configured by VIRL Configuration Engine 0.15.3
+ lock-passwd: false
+ name: cisco
+ plain-text-passwd: cisco
+ shell: /bin/bash
+ ssh-authorized-keys:
+ - VIRL-USER-SSH-PUBLIC-KEY
+ sudo: ALL=(ALL) ALL
+write_files:
+- path: /etc/init/ttyS0.conf
+ owner: root:root
+ content: |
+ # ttyS0 - getty
+ # This service maintains a getty on ttyS0 from the point the system is
+ # started until it is shut down again.
+ start on stopped rc or RUNLEVEL=[12345]
+ stop on runlevel [!12345]
+ respawn
+ exec /sbin/getty -L 115200 ttyS0 vt102
+ permissions: '0644'
+- path: /etc/systemd/system/dhclient@.service
+ content: |
+ [Unit]
+ Description=Run dhclient on %i interface
+ After=network.target
+ [Service]
+ Type=oneshot
+ ExecStart=/sbin/dhclient %i -pf /var/run/dhclient.%i.pid -lf /var/lib/dhclient/dhclient.%i.lease
+ RemainAfterExit=yes
+ owner: root:root
+ permissions: '0644'
+- path: /cisco/etc/vpp-server.conf
+ owner: root:root
+ permissions: '0644'
+ content: |-
+ set interface ip address GigabitEthernet0/4/0 10.0.0.25/30
+ set interface ip address GigabitEthernet0/4/0 ::a:1:1:0:1a/126
+ set interface state GigabitEthernet0/4/0 up
+ set interface ip address GigabitEthernet0/5/0 10.0.0.29/30
+ set interface ip address GigabitEthernet0/5/0 ::a:1:1:0:1e/126
+ set interface state GigabitEthernet0/5/0 up
+ set interface ip address GigabitEthernet0/6/0 10.0.0.22/30
+ set interface ip address GigabitEthernet0/6/0 ::a:1:1:0:17/126
+ set interface state GigabitEthernet0/6/0 up
+ set interface ip address GigabitEthernet0/7/0 10.0.0.34/30
+ set interface ip address GigabitEthernet0/7/0 ::a:1:1:0:23/126
+ set interface state GigabitEthernet0/7/0 up
+ sr tunnel src 0::a:1:1:0:16 dst 0::a:1:1:0:6/128 next 0::a:1:1:0:1b next 0::a:1:1:0:e next 0::a:1:1:0:6 tag 0::a:1:1:0:17 InPE 1 clean
+</entry>
+ </extensions>
+ <interface id="0" name="GigabitEthernet0/4/0" ipv4="10.0.0.25" ipv6="::a:1:1:0:1a" netPrefixLenV4="30" netPrefixLenV6="126"/>
+ <interface id="1" name="GigabitEthernet0/5/0" ipv4="10.0.0.29" ipv6="::a:1:1:0:1e" netPrefixLenV4="30" netPrefixLenV6="126"/>
+ <interface id="2" name="GigabitEthernet0/6/0" ipv4="10.0.0.22" ipv6="::a:1:1:0:17" netPrefixLenV4="30" netPrefixLenV6="126"/>
+ <interface id="3" name="GigabitEthernet0/7/0" ipv4="10.0.0.34" ipv6="::a:1:1:0:23" netPrefixLenV4="30" netPrefixLenV6="126"/>
+ </node>
+ <node name="vpp-3" type="SIMPLE" subtype="vPP" location="415,89">
+ <extensions>
+ <entry key="config" type="string">#cloud-config
+bootcmd:
+- ln -s -t /etc/rc.d /etc/rc.local
+hostname: vpp-3
+manage_etc_hosts: true
+runcmd:
+- start ttyS0
+- systemctl start getty@ttyS0.service
+- systemctl start rc-local
+- sed -i '/^\s*PasswordAuthentication\s\+no/d' /etc/ssh/sshd_config
+- echo "UseDNS no" >> /etc/ssh/sshd_config
+- service ssh restart
+- service sshd restart
+- sed -i 's/no-pci//' /cisco/etc/qn.conf
+- sed -i 's/1024/1024 decimal-interface-names/g' /cisco/etc/qn.conf
+users:
+- default
+- gecos: User configured by VIRL Configuration Engine 0.15.3
+ lock-passwd: false
+ name: cisco
+ plain-text-passwd: cisco
+ shell: /bin/bash
+ ssh-authorized-keys:
+ - VIRL-USER-SSH-PUBLIC-KEY
+ sudo: ALL=(ALL) ALL
+write_files:
+- path: /etc/init/ttyS0.conf
+ owner: root:root
+ content: |
+ # ttyS0 - getty
+ # This service maintains a getty on ttyS0 from the point the system is
+ # started until it is shut down again.
+ start on stopped rc or RUNLEVEL=[12345]
+ stop on runlevel [!12345]
+ respawn
+ exec /sbin/getty -L 115200 ttyS0 vt102
+ permissions: '0644'
+- path: /etc/systemd/system/dhclient@.service
+ content: |
+ [Unit]
+ Description=Run dhclient on %i interface
+ After=network.target
+ [Service]
+ Type=oneshot
+ ExecStart=/sbin/dhclient %i -pf /var/run/dhclient.%i.pid -lf /var/lib/dhclient/dhclient.%i.lease
+ RemainAfterExit=yes
+ owner: root:root
+ permissions: '0644'
+- path: /cisco/etc/vpp-server.conf
+ owner: root:root
+ permissions: '0644'
+ content: |-
+ set interface ip address GigabitEthernet0/4/0 10.0.0.14/30
+ set interface ip address GigabitEthernet0/4/0 ::a:1:1:0:f/126
+ set interface state GigabitEthernet0/4/0 up
+ set interface ip address GigabitEthernet0/5/0 10.0.0.26/30
+ set interface ip address GigabitEthernet0/5/0 ::a:1:1:0:1b/126
+ set interface state GigabitEthernet0/5/0 up
+ comment { fix src rpf drop screws}
+ ip route add ::a:1:1:0:6/128 via drop
+ ip route add ::a:1:1:0:16/128 via drop
+ ip route add ::a:1:1:0:22/128 via drop
+</entry>
+ </extensions>
+ <interface id="0" name="GigabitEthernet0/4/0" ipv4="10.0.0.14" ipv6="::a:1:1:0:f" netPrefixLenV4="30" netPrefixLenV6="126"/>
+ <interface id="1" name="GigabitEthernet0/5/0" ipv4="10.0.0.26" ipv6="::a:1:1:0:1b" netPrefixLenV4="30" netPrefixLenV6="126"/>
+ </node>
+ <node name="vpp-4" type="SIMPLE" subtype="vPP" location="419,216">
+ <extensions>
+ <entry key="config" type="string">#cloud-config
+bootcmd:
+- ln -s -t /etc/rc.d /etc/rc.local
+hostname: vpp-4
+manage_etc_hosts: true
+runcmd:
+- start ttyS0
+- systemctl start getty@ttyS0.service
+- systemctl start rc-local
+- sed -i '/^\s*PasswordAuthentication\s\+no/d' /etc/ssh/sshd_config
+- echo "UseDNS no" >> /etc/ssh/sshd_config
+- service ssh restart
+- service sshd restart
+- sed -i 's/no-pci//' /cisco/etc/qn.conf
+- sed -i 's/1024/1024 decimal-interface-names/g' /cisco/etc/qn.conf
+users:
+- default
+- gecos: User configured by VIRL Configuration Engine 0.15.3
+ lock-passwd: false
+ name: cisco
+ plain-text-passwd: cisco
+ shell: /bin/bash
+ ssh-authorized-keys:
+ - VIRL-USER-SSH-PUBLIC-KEY
+ sudo: ALL=(ALL) ALL
+write_files:
+- path: /etc/init/ttyS0.conf
+ owner: root:root
+ content: |
+ # ttyS0 - getty
+ # This service maintains a getty on ttyS0 from the point the system is
+ # started until it is shut down again.
+ start on stopped rc or RUNLEVEL=[12345]
+ stop on runlevel [!12345]
+ respawn
+ exec /sbin/getty -L 115200 ttyS0 vt102
+ permissions: '0644'
+- path: /etc/systemd/system/dhclient@.service
+ content: |
+ [Unit]
+ Description=Run dhclient on %i interface
+ After=network.target
+ [Service]
+ Type=oneshot
+ ExecStart=/sbin/dhclient %i -pf /var/run/dhclient.%i.pid -lf /var/lib/dhclient/dhclient.%i.lease
+ RemainAfterExit=yes
+ owner: root:root
+ permissions: '0644'
+- path: /cisco/etc/vpp-server.conf
+ owner: root:root
+ permissions: '0644'
+ content: |-
+ set interface ip address GigabitEthernet0/4/0 10.0.0.18/30
+ set interface ip address GigabitEthernet0/4/0 ::a:1:1:0:13/126
+ set interface state GigabitEthernet0/4/0 up
+ set interface ip address GigabitEthernet0/5/0 10.0.0.30/30
+ set interface ip address GigabitEthernet0/5/0 ::a:1:1:0:1f/126
+ set interface state GigabitEthernet0/5/0 up
+</entry>
+ </extensions>
+ <interface id="0" name="GigabitEthernet0/4/0" ipv4="10.0.0.18" ipv6="::a:1:1:0:13" netPrefixLenV4="30" netPrefixLenV6="126"/>
+ <interface id="1" name="GigabitEthernet0/5/0" ipv4="10.0.0.30" ipv6="::a:1:1:0:1f" netPrefixLenV4="30" netPrefixLenV6="126"/>
+ </node>
+ <connection dst="/virl:topology/virl:node[5]/virl:interface[1]" src="/virl:topology/virl:node[1]/virl:interface[1]"/>
+ <connection dst="/virl:topology/virl:node[5]/virl:interface[2]" src="/virl:topology/virl:node[3]/virl:interface[1]"/>
+ <connection dst="/virl:topology/virl:node[7]/virl:interface[1]" src="/virl:topology/virl:node[5]/virl:interface[3]"/>
+ <connection dst="/virl:topology/virl:node[8]/virl:interface[1]" src="/virl:topology/virl:node[5]/virl:interface[4]"/>
+ <connection dst="/virl:topology/virl:node[6]/virl:interface[1]" src="/virl:topology/virl:node[7]/virl:interface[2]"/>
+ <connection dst="/virl:topology/virl:node[6]/virl:interface[2]" src="/virl:topology/virl:node[8]/virl:interface[2]"/>
+ <connection dst="/virl:topology/virl:node[2]/virl:interface[1]" src="/virl:topology/virl:node[6]/virl:interface[3]"/>
+ <connection dst="/virl:topology/virl:node[4]/virl:interface[1]" src="/virl:topology/virl:node[6]/virl:interface[4]"/>
+</topology>
diff --git a/src/scripts/vnet/virl/ip6sr_notes.txt b/src/scripts/vnet/virl/ip6sr_notes.txt new file mode 100644 index 00000000..5febf2c6 --- /dev/null +++ b/src/scripts/vnet/virl/ip6sr_notes.txt @@ -0,0 +1,38 @@ +vpp-1, tunnel 1: iosv-1 vpp-1 vpp-3 vpp-2 iosv-2
+
+iosv-1
+::a:1:1:0:6
+
+to iosv2
+ipv6 route ::a:1:1:0:16/128 ::a:1:1:0:7
+to iosv4
+ipv6 route ::a:1:1:0:22/128 ::a:1:1:0:7
+
+vpp-1
+
+::a:1:1:0:7
+...
+::a:1:1:0:e
+
+sr tunnel src 0::a:1:1:0:6 dst 0::a:1:1:0:16/128 next 0::a:1:1:0:f next 0::a:1:1:0:1a next 0::a:1:1:0:16 tag 0::a:1:1:0:7 InPE 1 clean
+
+vpp-3
+::a:1:1:0:f
+..
+::a:1:1:0:1b
+
+comment {fix src rpf screws}
+ip route add ::a:1:1:0:6/128 via drop
+ip route add ::a:1:1:0:16/128 via drop
+ip route add ::a:1:1:0:22/128 via drop
+vpp-2
+::a:1:1:0:1a
+..
+::a:1:1:0:17
+
+sr tunnel src 0::a:1:1:0:16 dst 0::a:1:1:0:6/128 next 0::a:1:1:0:1b next 0::a:1:1:0:e next 0::a:1:1:0:6 tag 0::a:1:1:0:17 InPE 1 clean
+
+iosv-2
+::a:1:1:0:16
+
+ipv6 route ::a:1:1:0:6/128 ::a:1:1:0:17
diff --git a/src/scripts/vnet/virl/mplsogre.virl b/src/scripts/vnet/virl/mplsogre.virl new file mode 100644 index 00000000..33dd0329 --- /dev/null +++ b/src/scripts/vnet/virl/mplsogre.virl @@ -0,0 +1,319 @@ +<?xml version="1.0" encoding="UTF-8" standalone="yes"?> +<topology xmlns="http://www.cisco.com/VIRL" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" schemaVersion="0.9" xsi:schemaLocation="http://www.cisco.com/VIRL https://raw.github.com/CiscoVIRL/schema/v0.9/virl.xsd"> + <extensions> + <entry key="management_network" type="String">flat</entry> + </extensions> + <node name="vpp-1" type="SIMPLE" subtype="vPP" location="467,307" vmImage="vPP-hacker [445e503a-564e-4c14-93e1-9660957c539a]" vmFlavor="vPP-small [e7f7de38-54e3-46f1-92ef-92b0039c1c60]"> + <extensions> + <entry key="config" type="string">#cloud-config +bootcmd: +- ln -s -t /etc/rc.d /etc/rc.local +hostname: vpp-1 +manage_etc_hosts: true +runcmd: +- start ttyS0 +- systemctl start getty@ttyS0.service +- systemctl start rc-local +- sed -i '/^\s*PasswordAuthentication\s\+no/d' /etc/ssh/sshd_config +- echo "UseDNS no" >> /etc/ssh/sshd_config +- service ssh restart +- service sshd restart +- sed -i 's/no-pci//' /cisco/etc/qn.conf +- sed -i 's/1024/1024 decimal-interface-names/g' /cisco/etc/qn.conf +users: +- default +- gecos: User configured by VIRL Configuration Engine 0.15.3 + lock-passwd: false + name: cisco + plain-text-passwd: cisco + shell: /bin/bash + ssh-authorized-keys: + - VIRL-USER-SSH-PUBLIC-KEY + sudo: ALL=(ALL) ALL +write_files: +- path: /etc/init/ttyS0.conf + owner: root:root + content: | + # ttyS0 - getty + # This service maintains a getty on ttyS0 from the point the system is + # started until it is shut down again. + start on stopped rc or RUNLEVEL=[12345] + stop on runlevel [!12345] + respawn + exec /sbin/getty -L 115200 ttyS0 vt102 + permissions: '0644' +- path: /etc/systemd/system/dhclient@.service + content: | + [Unit] + Description=Run dhclient on %i interface + After=network.target + [Service] + Type=oneshot + ExecStart=/sbin/dhclient %i -pf /var/run/dhclient.%i.pid -lf /var/lib/dhclient/dhclient.%i.lease + RemainAfterExit=yes + owner: root:root + permissions: '0644' +- path: /cisco/etc/vpp-server.conf + owner: root:root + permissions: '0644' + content: |- + set interface ip address GigabitEthernet0/4/0 10.0.0.6/30 + set interface state GigabitEthernet0/4/0 up + set interface ip address GigabitEthernet0/5/0 10.0.0.9/30 + set interface state GigabitEthernet0/5/0 up + mpls encap add label 30 fib 0 dest 10.0.0.10 + mpls decap add label 30 fib 0 + create mpls gre tunnel src 10.0.0.9 dst 10.0.0.10 intfc 10.0.0.13/30 inner-fib-id 0 outer-fib-id 0 +</entry> + </extensions> + <interface id="0" name="GigabitEthernet0/4/0" ipv4="10.0.0.6" netPrefixLenV4="30"/> + <interface id="1" name="GigabitEthernet0/5/0" ipv4="10.0.0.9" netPrefixLenV4="30"/> + </node> + <node name="vpp-2" type="SIMPLE" subtype="vPP" location="591,305" vmImage="vPP-hacker [445e503a-564e-4c14-93e1-9660957c539a]" vmFlavor="vPP-small [e7f7de38-54e3-46f1-92ef-92b0039c1c60]"> + <extensions> + <entry key="config" type="string">#cloud-config +bootcmd: +- ln -s -t /etc/rc.d /etc/rc.local +hostname: vpp-2 +manage_etc_hosts: true +runcmd: +- start ttyS0 +- systemctl start getty@ttyS0.service +- systemctl start rc-local +- sed -i '/^\s*PasswordAuthentication\s\+no/d' /etc/ssh/sshd_config +- echo "UseDNS no" >> /etc/ssh/sshd_config +- service ssh restart +- service sshd restart +- sed -i 's/no-pci//' /cisco/etc/qn.conf +- sed -i 's/1024/1024 decimal-interface-names/g' /cisco/etc/qn.conf +users: +- default +- gecos: User configured by VIRL Configuration Engine 0.15.3 + lock-passwd: false + name: cisco + plain-text-passwd: cisco + shell: /bin/bash + ssh-authorized-keys: + - VIRL-USER-SSH-PUBLIC-KEY + sudo: ALL=(ALL) ALL +write_files: +- path: /etc/init/ttyS0.conf + owner: root:root + content: | + # ttyS0 - getty + # This service maintains a getty on ttyS0 from the point the system is + # started until it is shut down again. + start on stopped rc or RUNLEVEL=[12345] + stop on runlevel [!12345] + respawn + exec /sbin/getty -L 115200 ttyS0 vt102 + permissions: '0644' +- path: /etc/systemd/system/dhclient@.service + content: | + [Unit] + Description=Run dhclient on %i interface + After=network.target + [Service] + Type=oneshot + ExecStart=/sbin/dhclient %i -pf /var/run/dhclient.%i.pid -lf /var/lib/dhclient/dhclient.%i.lease + RemainAfterExit=yes + owner: root:root + permissions: '0644' +- path: /cisco/etc/vpp-server.conf + owner: root:root + permissions: '0644' + content: |- + set interface ip address GigabitEthernet0/4/0 10.0.0.10/30 + set interface state GigabitEthernet0/4/0 up + set interface ip address GigabitEthernet0/5/0 10.0.0.14/30 + set interface state GigabitEthernet0/5/0 up + mpls encap add label 30 fib 0 dest 10.0.0.9 + mpls decap add label 30 fib 0 + create mpls gre tunnel src 10.0.0.10 dst 10.0.0.9 intfc 10.0.0.5/30 inner-fib-id 0 outer-fib-id 0 +</entry> + </extensions> + <interface id="0" name="GigabitEthernet0/4/0" ipv4="10.0.0.10" netPrefixLenV4="30"/> + <interface id="1" name="GigabitEthernet0/5/0" ipv4="10.0.0.14" netPrefixLenV4="30"/> + </node> + <node name="iosv-1" type="SIMPLE" subtype="IOSv" location="326,311" ipv4="192.168.0.1"> + <extensions> + <entry key="config" type="string">! IOS Config generated on 2015-03-03 17:26 +! by autonetkit_0.15.0 +! +hostname iosv-1 +boot-start-marker +boot-end-marker +! +no aaa new-model +! +! +ip cef +ipv6 unicast-routing +ipv6 cef +! +! +service timestamps debug datetime msec +service timestamps log datetime msec +no service password-encryption +no service config +enable password cisco +ip classless +ip subnet-zero +no ip domain lookup +line vty 0 4 + transport input ssh telnet + exec-timeout 720 0 + password cisco + login +line con 0 + password cisco +! +! +interface Loopback0 + description Loopback + ip address 192.168.0.1 255.255.255.255 +! +interface GigabitEthernet0/0 + description OOB Management + ! Configured on launch + no ip address + duplex auto + speed auto + no shutdown +! +interface GigabitEthernet0/1 + description to vpp-1 + ip address 10.0.0.5 255.255.255.252 + ip ospf cost 1 + duplex auto + speed auto + no shutdown +! +! +! +router ospf 1 + network 192.168.0.1 0.0.0.0 area 0 + log-adjacency-changes + passive-interface Loopback0 + network 10.0.0.4 0.0.0.3 area 0 +! +! +router bgp 1 + bgp router-id 192.168.0.1 + no synchronization +! ibgp + ! ibgp peers + ! + neighbor 192.168.0.4 remote-as 1 + neighbor 192.168.0.4 description iBGP peer iosv-2 + neighbor 192.168.0.4 update-source Loopback0 +! +! + ! + address-family ipv4 + network 192.168.0.1 mask 255.255.255.255 + neighbor 192.168.0.4 activate + exit-address-family +! +! +! +ip route 10.0.0.13 255.255.255.255 10.0.0.6 +end +</entry> + <entry key="AutoNetkit.mgmt_ip" type="string"></entry> + </extensions> + <interface id="0" name="GigabitEthernet0/1" ipv4="10.0.0.5" netPrefixLenV4="30"/> + </node> + <node name="iosv-2" type="SIMPLE" subtype="IOSv" location="741,307" ipv4="192.168.0.4"> + <extensions> + <entry key="config" type="string">! IOS Config generated on 2015-03-03 17:26 +! by autonetkit_0.15.0 +! +hostname iosv-2 +boot-start-marker +boot-end-marker +! +no aaa new-model +! +! +ip cef +ipv6 unicast-routing +ipv6 cef +! +! +service timestamps debug datetime msec +service timestamps log datetime msec +no service password-encryption +no service config +enable password cisco +ip classless +ip subnet-zero +no ip domain lookup +line vty 0 4 + transport input ssh telnet + exec-timeout 720 0 + password cisco + login +line con 0 + password cisco +! +! +interface Loopback0 + description Loopback + ip address 192.168.0.4 255.255.255.255 +! +interface GigabitEthernet0/0 + description OOB Management + ! Configured on launch + no ip address + duplex auto + speed auto + no shutdown +! +interface GigabitEthernet0/1 + description to vpp-2 + ip address 10.0.0.13 255.255.255.252 + ip ospf cost 1 + duplex auto + speed auto + no shutdown +! +! +! +router ospf 1 + network 192.168.0.4 0.0.0.0 area 0 + log-adjacency-changes + passive-interface Loopback0 + network 10.0.0.12 0.0.0.3 area 0 +! +! +router bgp 1 + bgp router-id 192.168.0.4 + no synchronization +! ibgp + ! ibgp peers + ! + neighbor 192.168.0.1 remote-as 1 + neighbor 192.168.0.1 description iBGP peer iosv-1 + neighbor 192.168.0.1 update-source Loopback0 +! +! + ! + address-family ipv4 + network 192.168.0.4 mask 255.255.255.255 + neighbor 192.168.0.1 activate + exit-address-family +! +! +ip route 10.0.0.5 255.255.255.255 10.0.0.14 +! +end +</entry> + <entry key="AutoNetkit.mgmt_ip" type="string"></entry> + </extensions> + <interface id="0" name="GigabitEthernet0/1" ipv4="10.0.0.13" netPrefixLenV4="30"/> + </node> + <connection dst="/virl:topology/virl:node[1]/virl:interface[1]" src="/virl:topology/virl:node[3]/virl:interface[1]"/> + <connection dst="/virl:topology/virl:node[2]/virl:interface[1]" src="/virl:topology/virl:node[1]/virl:interface[2]"/> + <connection dst="/virl:topology/virl:node[4]/virl:interface[1]" src="/virl:topology/virl:node[2]/virl:interface[2]"/> +</topology> diff --git a/src/scripts/vnet/virl/simple.virl b/src/scripts/vnet/virl/simple.virl new file mode 100644 index 00000000..6033c42c --- /dev/null +++ b/src/scripts/vnet/virl/simple.virl @@ -0,0 +1,389 @@ +<?xml version="1.0" encoding="UTF-8" standalone="yes"?> +<topology xmlns="http://www.cisco.com/VIRL" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" schemaVersion="0.9" xsi:schemaLocation="http://www.cisco.com/VIRL https://raw.github.com/CiscoVIRL/schema/v0.9/virl.xsd"> + <extensions> + <entry key="management_network" type="String">flat</entry> + </extensions> + <node name="iosv-1" type="SIMPLE" subtype="IOSv" location="427,219" ipv4="192.168.0.2"> + <extensions> + <entry key="config" type="string">! +! Last configuration change at 14:27:32 UTC Fri Mar 27 2015 +! +version 15.4 +service timestamps debug datetime msec +service timestamps log datetime msec +no service password-encryption +! +hostname iosv-1 +! +boot-start-marker +boot-end-marker +! +! +enable password cisco +! +no aaa new-model +! +! +! +mmi polling-interval 60 +no mmi auto-configure +no mmi pvc +mmi snmp-timeout 180 +! +! +! +! +! +! +! +! +! +! +! +! +! +no ip domain lookup +ip cef +ipv6 unicast-routing +ipv6 cef +! +multilink bundle-name authenticated +! +! +cts logging verbose +! +! +! +redundancy +! +! +! +! +! +! +! +! +! +! +! +! +! +! +! +interface Loopback0 + description Loopback + ip address 192.168.0.2 255.255.255.255 +! +interface GigabitEthernet0/0 + description OOB Management + ip address 172.16.1.167 255.255.255.0 + duplex auto + speed auto + media-type rj45 +! +interface GigabitEthernet0/1 + description to vpp-1 + ip address 10.0.0.5 255.255.255.252 + ip ospf cost 1 + duplex auto + speed auto + media-type rj45 +! +router ospf 1 + passive-interface Loopback0 + network 10.0.0.4 0.0.0.3 area 0 + network 192.168.0.2 0.0.0.0 area 0 +! +router bgp 1 + bgp router-id 192.168.0.2 + bgp log-neighbor-changes + neighbor 192.168.0.3 remote-as 1 + neighbor 192.168.0.3 description iBGP peer iosv-2 + neighbor 192.168.0.3 update-source Loopback0 + ! + address-family ipv4 + network 192.168.0.2 mask 255.255.255.255 + neighbor 192.168.0.3 activate + exit-address-family +! +ip forward-protocol nd +! +! +no ip http server +no ip http secure-server +ip route 10.0.0.9 255.255.255.255 10.0.0.6 +! +! +! +! +control-plane +! +banner exec ` +************************************************************************** +* IOSv is strictly limited to use for evaluation, demonstration and IOS * +* education. IOSv is provided as-is and is not supported by Cisco's * +* Technical Advisory Center. Any use or disclosure, in whole or in part, * +* of the IOSv Software or Documentation to any third party for any * +* purposes is expressly prohibited except as otherwise authorized by * +* Cisco in writing. * +**************************************************************************` +banner incoming ` +************************************************************************** +* IOSv is strictly limited to use for evaluation, demonstration and IOS * +* education. IOSv is provided as-is and is not supported by Cisco's * +* Technical Advisory Center. Any use or disclosure, in whole or in part, * +* of the IOSv Software or Documentation to any third party for any * +* purposes is expressly prohibited except as otherwise authorized by * +* Cisco in writing. * +**************************************************************************` +banner login ` +************************************************************************** +* IOSv is strictly limited to use for evaluation, demonstration and IOS * +* education. IOSv is provided as-is and is not supported by Cisco's * +* Technical Advisory Center. Any use or disclosure, in whole or in part, * +* of the IOSv Software or Documentation to any third party for any * +* purposes is expressly prohibited except as otherwise authorized by * +* Cisco in writing. * +**************************************************************************` +! +line con 0 + password cisco +line aux 0 +line vty 0 4 + exec-timeout 720 0 + password cisco + login + transport input telnet ssh +! +no scheduler allocate +! +end</entry> + <entry key="AutoNetkit.mgmt_ip" type="string"></entry> + </extensions> + <interface id="0" name="GigabitEthernet0/1" ipv4="10.0.0.5" netPrefixLenV4="30"/> + </node> + <node name="iosv-2" type="SIMPLE" subtype="IOSv" location="704,221" ipv4="192.168.0.3"> + <extensions> + <entry key="config" type="string">! +! Last configuration change at 14:26:58 UTC Fri Mar 27 2015 +! +version 15.4 +service timestamps debug datetime msec +service timestamps log datetime msec +no service password-encryption +! +hostname iosv-2 +! +boot-start-marker +boot-end-marker +! +! +enable password cisco +! +no aaa new-model +! +! +! +mmi polling-interval 60 +no mmi auto-configure +no mmi pvc +mmi snmp-timeout 180 +! +! +! +! +! +! +! +! +! +! +! +! +! +no ip domain lookup +ip cef +ipv6 unicast-routing +ipv6 cef +! +multilink bundle-name authenticated +! +! +cts logging verbose +! +! +! +redundancy +! +! +! +! +! +! +! +! +! +! +! +! +! +! +! +interface Loopback0 + description Loopback + ip address 192.168.0.3 255.255.255.255 +! +interface GigabitEthernet0/0 + description OOB Management + ip address 172.16.1.164 255.255.255.0 + duplex auto + speed auto + media-type rj45 +! +interface GigabitEthernet0/1 + description to vpp-1 + ip address 10.0.0.9 255.255.255.252 + ip ospf cost 1 + duplex auto + speed auto + media-type rj45 +! +router ospf 1 + passive-interface Loopback0 + network 10.0.0.8 0.0.0.3 area 0 + network 192.168.0.3 0.0.0.0 area 0 +! +router bgp 1 + bgp router-id 192.168.0.3 + bgp log-neighbor-changes + neighbor 192.168.0.2 remote-as 1 + neighbor 192.168.0.2 description iBGP peer iosv-1 + neighbor 192.168.0.2 update-source Loopback0 + ! + address-family ipv4 + network 192.168.0.3 mask 255.255.255.255 + neighbor 192.168.0.2 activate + exit-address-family +! +ip forward-protocol nd +! +! +no ip http server +no ip http secure-server +ip route 10.0.0.5 255.255.255.255 10.0.0.10 +! +! +! +! +control-plane +! +banner exec ` +************************************************************************** +* IOSv is strictly limited to use for evaluation, demonstration and IOS * +* education. IOSv is provided as-is and is not supported by Cisco's * +* Technical Advisory Center. Any use or disclosure, in whole or in part, * +* of the IOSv Software or Documentation to any third party for any * +* purposes is expressly prohibited except as otherwise authorized by * +* Cisco in writing. * +**************************************************************************` +banner incoming ` +************************************************************************** +* IOSv is strictly limited to use for evaluation, demonstration and IOS * +* education. IOSv is provided as-is and is not supported by Cisco's * +* Technical Advisory Center. Any use or disclosure, in whole or in part, * +* of the IOSv Software or Documentation to any third party for any * +* purposes is expressly prohibited except as otherwise authorized by * +* Cisco in writing. * +**************************************************************************` +banner login ` +************************************************************************** +* IOSv is strictly limited to use for evaluation, demonstration and IOS * +* education. IOSv is provided as-is and is not supported by Cisco's * +* Technical Advisory Center. Any use or disclosure, in whole or in part, * +* of the IOSv Software or Documentation to any third party for any * +* purposes is expressly prohibited except as otherwise authorized by * +* Cisco in writing. * +**************************************************************************` +! +line con 0 + password cisco +line aux 0 +line vty 0 4 + exec-timeout 720 0 + password cisco + login + transport input telnet ssh +! +no scheduler allocate +! +end</entry> + <entry key="AutoNetkit.mgmt_ip" type="string"></entry> + </extensions> + <interface id="0" name="GigabitEthernet0/1" ipv4="10.0.0.9" netPrefixLenV4="30"/> + </node> + <node name="vpp-1" type="SIMPLE" subtype="vPP" location="561,217"> + <extensions> + <entry key="config" type="string">#cloud-config +bootcmd: +- ln -s -t /etc/rc.d /etc/rc.local +hostname: vpp-1 +manage_etc_hosts: true +runcmd: +- start ttyS0 +- systemctl start getty@ttyS0.service +- systemctl start rc-local +- sed -i '/^\s*PasswordAuthentication\s\+no/d' /etc/ssh/sshd_config +- echo "UseDNS no" >> /etc/ssh/sshd_config +- service ssh restart +- service sshd restart +- sed -i 's/no-pci//' /cisco/etc/qn.conf +- sed -i 's/1024/1024 decimal-interface-names/g' /cisco/etc/qn.conf +users: +- default +- gecos: User configured by VIRL Configuration Engine 0.15.3 + lock-passwd: false + name: cisco + plain-text-passwd: cisco + shell: /bin/bash + ssh-authorized-keys: + - VIRL-USER-SSH-PUBLIC-KEY + sudo: ALL=(ALL) ALL +write_files: +- path: /etc/init/ttyS0.conf + owner: root:root + content: | + # ttyS0 - getty + # This service maintains a getty on ttyS0 from the point the system is + # started until it is shut down again. + start on stopped rc or RUNLEVEL=[12345] + stop on runlevel [!12345] + respawn + exec /sbin/getty -L 115200 ttyS0 vt102 + permissions: '0644' +- path: /etc/systemd/system/dhclient@.service + content: | + [Unit] + Description=Run dhclient on %i interface + After=network.target + [Service] + Type=oneshot + ExecStart=/sbin/dhclient %i -pf /var/run/dhclient.%i.pid -lf /var/lib/dhclient/dhclient.%i.lease + RemainAfterExit=yes + owner: root:root + permissions: '0644' +- path: /cisco/etc/vpp-server.conf + owner: root:root + permissions: '0644' + content: |- + set interface ip address GigabitEthernet0/4/0 10.0.0.6/30 + set interface state GigabitEthernet0/4/0 up + set interface ip address GigabitEthernet0/5/0 10.0.0.10/30 + set interface state GigabitEthernet0/5/0 up +</entry> + </extensions> + <interface id="0" name="GigabitEthernet0/4/0" ipv4="10.0.0.6" netPrefixLenV4="30"/> + <interface id="1" name="GigabitEthernet0/5/0" ipv4="10.0.0.10" netPrefixLenV4="30"/> + </node> + <connection dst="/virl:topology/virl:node[3]/virl:interface[1]" src="/virl:topology/virl:node[1]/virl:interface[1]"/> + <connection dst="/virl:topology/virl:node[2]/virl:interface[1]" src="/virl:topology/virl:node[3]/virl:interface[2]"/> +</topology> diff --git a/src/scripts/vnet/vlan b/src/scripts/vnet/vlan new file mode 100644 index 00000000..076080a6 --- /dev/null +++ b/src/scripts/vnet/vlan @@ -0,0 +1,23 @@ +int create-ethernet +int create-sub fake-eth0 1 +set int state fake-eth0 up +set int state fake-eth0.1 up + +packet-generator new { + name x + limit 1 + node ethernet-input + interface fake-eth0 + size 64-64 + no-recycle + data { + IP4: 1.2.3 -> 4.5.6 vlan 1 + ICMP: 1.2.3.4 -> 5.6.7.8 + ICMP echo_request + incrementing 100 + } +} + +tr add pg-input 100 +ip route 5.6.7.8/32 via local +ip route 1.2.3.4/32 via local |