diff options
Diffstat (limited to 'plugin-renderer-vpp.conf.in')
| -rw-r--r-- | plugin-renderer-vpp.conf.in | 110 |
1 files changed, 110 insertions, 0 deletions
diff --git a/plugin-renderer-vpp.conf.in b/plugin-renderer-vpp.conf.in new file mode 100644 index 0000000..0da51bf --- /dev/null +++ b/plugin-renderer-vpp.conf.in @@ -0,0 +1,110 @@ +{ + "plugins": { + // Load vpp renderer plugin + "renderer": ["libopflex_agent_renderer_vpp.so"] + }, + + "renderers": { + // vpp renderer configuration + // "vpp": { + // Put configuration specific to renderer plugin here. + // "inspect-socket": "/usr/local/var/run/opflex-agent-vpp-inspect.sock", + // "encap": { + // "vxlan" : { + // "encap-iface": "vpp_vxlan0", + // // The name of the interface whose IP should be used + // // as the source IP in encapsulated traffic. + // "uplink-iface": "team0.4093", + // + // // The vlan tag, if any, used on the uplink interface. + // // Set to zero or omit if the uplink is untagged. + // "uplink-vlan": 4093, + // + // // The IP address used for the destination IP in + // // the encapsulated traffic. This should be an + // // anycast IP address understood by the upstream + // // stiched-mode fabric. + // "remote-ip": "10.0.0.32", + // + // // UDP port number of the encapsulated traffic. + // "remote-port": 4789 + // }, + // // Encapsulate traffic with a locally-significant VLAN + // // tag + // "vlan" : { + // "encap-iface": "team0", + // // The name of the interface VPP will consume for uplink + // "uplink-iface": "veth-uplink", + // "uplink-iface": "BondEthernet0", + // "uplink-slaves" : [ + // "veth-uplink1", + // "veth-uplink2" + // ], + // // The vlan tag, used on the uplink interface. + // // for control traffic. + // "uplink-vlan": 4093, + // // The dhcp options + // "dhcp-opt": [ + // "opt-1", + // "opt-2", + // "opt-3" + // ] + // } + // }, + // "forwarding": { + // // Configure the virtual distributed router + // "virtual-router": { + // // Enable virtual distributed router. Set to true + // // to enable or false to disable. + // // Default: true. + // "enabled": true, + // + // // Override MAC address for virtual router. + // // Default: "00:22:bd:f8:19:ff" + // "mac": "00:22:bd:f8:19:ff", + // + // // Configure IPv6-related settings for the virtual + // // router + // "ipv6" : { + // // Send router advertisement messages in + // // response to router solicitation requests as + // // well as unsolicited advertisements. This + // // is not required in stitched mode since the + // // hardware router will send them. + // "router-advertisement": false + // } + // } + // }, + // // Cross connect interfaces + // "x-connect" : [ + // // pair consists of two interfaces. Each interface has name, optional VLAN and IP addresses + // { + // "east" : { + // "iface" : "veth-uplink", + // "vlan" : 2222, + // "ip-address" : "10.0.0.10", + // "tag-rewrite" : "pop" + // }, + // "west" : { + // "iface" : "veth-storage-mgmt", + // "vlan" : 3333, + // "ip-address" : "10.0.0.20" + // } + // }, + // { + // "east" : { + // "iface" : "BondEthernet0", + // "vlan" : 2222, + // "ip-address" : "10.0.0.10", + // "tag-rewrite" : "pop" + // }, + // "west" : { + // "iface" : "veth-storage", + // "vlan" : 1111, + // "ip-address" : "10.0.0.40" + // } + // } + // ] + // } + } +} |