python 3 - examples working

8 files changed, 60 insertions, 60 deletions

diff --git a/scripts/automation/trex_control_plane/stl/examples/stl_bi_dir_flows.py b/scripts/automation/trex_control_plane/stl/examples/stl_bi_dir_flows.py
index 05fff67c..ff16d397 100644
--- a/scripts/automation/trex_control_plane/stl/examples/stl_bi_dir_flows.py
+++ b/scripts/automation/trex_control_plane/stl/examples/stl_bi_dir_flows.py
@@ -73,7 +73,7 @@ def simple_burst ():
         c.clear_stats()
 
         # choose rate and start traffic for 10 seconds on 5 mpps
-        print "Running 5 Mpps on ports 0, 1 for 10 seconds..."
+        print("Running 5 Mpps on ports 0, 1 for 10 seconds...")
         c.start(ports = [0, 1], mult = "5mpps", duration = 10)
 
         # block until done
@@ -82,14 +82,14 @@ def simple_burst ():
         # read the stats after the test
         stats = c.get_stats()
 
-        print json.dumps(stats[0], indent = 4, separators=(',', ': '), sort_keys = True)
-        print json.dumps(stats[1], indent = 4, separators=(',', ': '), sort_keys = True)
+        print(json.dumps(stats[0], indent = 4, separators=(',', ': '), sort_keys = True))
+        print(json.dumps(stats[1], indent = 4, separators=(',', ': '), sort_keys = True))
 
         lost_a = stats[0]["opackets"] - stats[1]["ipackets"]
         lost_b = stats[1]["opackets"] - stats[0]["ipackets"]
 
-        print "\npackets lost from 0 --> 1:   {0} pkts".format(lost_a)
-        print "packets lost from 1 --> 0:   {0} pkts".format(lost_b)
+        print("\npackets lost from 0 --> 1:   {0} pkts".format(lost_a))
+        print("packets lost from 1 --> 0:   {0} pkts".format(lost_b))
 
         if (lost_a == 0) and (lost_b == 0):
             passed = True
@@ -98,15 +98,15 @@ def simple_burst ():
 
     except STLError as e:
         passed = False
-        print e
+        print(e)
 
     finally:
         c.disconnect()
 
     if passed:
-        print "\nTest has passed :-)\n"
+        print("\nTest has passed :-)\n")
     else:
-        print "\nTest has failed :-(\n"
+        print("\nTest has failed :-(\n")
 
 while True:
 # run the tests
diff --git a/scripts/automation/trex_control_plane/stl/examples/stl_bi_dir_flows1.py b/scripts/automation/trex_control_plane/stl/examples/stl_bi_dir_flows1.py
index 264d985e..6e08a0fa 100644
--- a/scripts/automation/trex_control_plane/stl/examples/stl_bi_dir_flows1.py
+++ b/scripts/automation/trex_control_plane/stl/examples/stl_bi_dir_flows1.py
@@ -73,7 +73,7 @@ def simple_burst ():
         c.clear_stats()
 
         # choose rate and start traffic for 10 seconds on 5 mpps
-        print "Running 5 Mpps on ports 0, 1 for 10 seconds..."
+        print("Running 5 Mpps on ports 0, 1 for 10 seconds...")
         c.start(ports = [2, 3], mult = "5mpps", duration = 10)
 
         # block until done
@@ -82,14 +82,14 @@ def simple_burst ():
         # read the stats after the test
         stats = c.get_stats()
 
-        print json.dumps(stats[2], indent = 4, separators=(',', ': '), sort_keys = True)
-        print json.dumps(stats[3], indent = 4, separators=(',', ': '), sort_keys = True)
+        print(json.dumps(stats[2], indent = 4, separators=(',', ': '), sort_keys = True))
+        print(json.dumps(stats[3], indent = 4, separators=(',', ': '), sort_keys = True))
 
         lost_a = stats[2]["opackets"] - stats[3]["ipackets"]
         lost_b = stats[3]["opackets"] - stats[2]["ipackets"]
 
-        print "\npackets lost from 0 --> 1:   {0} pkts".format(lost_a)
-        print "packets lost from 1 --> 0:   {0} pkts".format(lost_b)
+        print("\npackets lost from 0 --> 1:   {0} pkts".format(lost_a))
+        print("packets lost from 1 --> 0:   {0} pkts".format(lost_b))
 
         if (lost_a == 0) and (lost_b == 0):
             passed = True
@@ -98,15 +98,15 @@ def simple_burst ():
 
     except STLError as e:
         passed = False
-        print e
+        print(e)
 
     finally:
         c.disconnect()
 
     if passed:
-        print "\nTest has passed :-)\n"
+        print("\nTest has passed :-)\n")
     else:
-        print "\nTest has failed :-(\n"
+        print("\nTest has failed :-(\n")
 
 while True :
     # run the tests
diff --git a/scripts/automation/trex_control_plane/stl/examples/stl_flow_stats.py b/scripts/automation/trex_control_plane/stl/examples/stl_flow_stats.py
index fa6e67c3..d938852e 100644
--- a/scripts/automation/trex_control_plane/stl/examples/stl_flow_stats.py
+++ b/scripts/automation/trex_control_plane/stl/examples/stl_flow_stats.py
@@ -6,7 +6,7 @@ import pprint
 
 def rx_example (tx_port, rx_port, burst_size):
 
-    print "\nGoing to inject {0} packets on port {1} - checking RX stats on port {2}\n".format(burst_size, tx_port, rx_port)
+    print("\nGoing to inject {0} packets on port {1} - checking RX stats on port {2}\n".format(burst_size, tx_port, rx_port))
 
     # create client
     c = STLClient()
@@ -32,10 +32,10 @@ def rx_example (tx_port, rx_port, burst_size):
         # add both streams to ports
         c.add_streams([s1], ports = [tx_port])
 
-        print "\ninjecting {0} packets on port {1}\n".format(total_pkts, tx_port)
+        print("\ninjecting {0} packets on port {1}\n".format(total_pkts, tx_port))
 
         for i in range(0, 10):
-            print "\nStarting iteration: {0}:".format(i)
+            print("\nStarting iteration: {0}:".format(i))
             rc = rx_iteration(c, tx_port, rx_port, total_pkts, pkt.get_pkt_len())
             if not rc:
                 passed = False
@@ -44,15 +44,15 @@ def rx_example (tx_port, rx_port, burst_size):
 
     except STLError as e:
         passed = False
-        print e
+        print(e)
 
     finally:
         c.disconnect()
 
     if passed:
-        print "\nTest has passed :-)\n"
+        print("\nTest has passed :-)\n")
     else:
-        print "\nTest has failed :-(\n"
+        print("\nTest has failed :-(\n")
 
 # RX one iteration
 def rx_iteration (c, tx_port, rx_port, total_pkts, pkt_len):
@@ -64,7 +64,7 @@ def rx_iteration (c, tx_port, rx_port, total_pkts, pkt_len):
 
     flow_stats = c.get_stats()['flow_stats'].get(5)
     if not flow_stats:
-        print "no flow stats available"
+        print("no flow stats available")
         return False
 
     tx_pkts  = flow_stats['tx_pkts'].get(tx_port, 0)
@@ -72,25 +72,25 @@ def rx_iteration (c, tx_port, rx_port, total_pkts, pkt_len):
     rx_pkts  = flow_stats['rx_pkts'].get(rx_port, 0)
 
     if tx_pkts != total_pkts:
-        print "TX pkts mismatch - got: {0}, expected: {1}".format(tx_pkts, total_pkts)
+        print("TX pkts mismatch - got: {0}, expected: {1}".format(tx_pkts, total_pkts))
         pprint.pprint(flow_stats)
         return False
     else:
-        print "TX pkts match   - {0}".format(tx_pkts)
+        print("TX pkts match   - {0}".format(tx_pkts))
 
     if tx_bytes != (total_pkts * pkt_len):
-        print "TX bytes mismatch - got: {0}, expected: {1}".format(tx_bytes, (total_pkts * pkt_len))
+        print("TX bytes mismatch - got: {0}, expected: {1}".format(tx_bytes, (total_pkts * pkt_len)))
         pprint.pprint(flow_stats)
         return False
     else:
-        print "TX bytes match  - {0}".format(tx_bytes)
+        print("TX bytes match  - {0}".format(tx_bytes))
 
     if rx_pkts != total_pkts:
-        print "RX pkts mismatch - got: {0}, expected: {1}".format(rx_pkts, total_pkts)
+        print("RX pkts mismatch - got: {0}, expected: {1}".format(rx_pkts, total_pkts))
         pprint.pprint(flow_stats)
         return False
     else:
-        print "RX pkts match   - {0}".format(rx_pkts)
+        print("RX pkts match   - {0}".format(rx_pkts))
 
     return True
 
diff --git a/scripts/automation/trex_control_plane/stl/examples/stl_pcap.py b/scripts/automation/trex_control_plane/stl/examples/stl_pcap.py
index a729a572..317f44c7 100644
--- a/scripts/automation/trex_control_plane/stl/examples/stl_pcap.py
+++ b/scripts/automation/trex_control_plane/stl/examples/stl_pcap.py
@@ -31,7 +31,7 @@ def inject_pcap (pcap_file, port, loop_count, ipg_usec, use_vm):
 
         profile = STLProfile.load_pcap(pcap_file, ipg_usec = ipg_usec, loop_count = loop_count, vm = vm)
 
-        print "Loaded pcap {0} with {1} packets...\n".format(pcap_file, len(profile))
+        print("Loaded pcap {0} with {1} packets...\n".format(pcap_file, len(profile)))
 
         # uncomment this for simulator run
         #STLSim().run(profile.get_streams(), outfile = 'out.cap')
@@ -47,10 +47,10 @@ def inject_pcap (pcap_file, port, loop_count, ipg_usec, use_vm):
 
         stats = c.get_stats()
         opackets = stats[port]['opackets']
-        print "{0} packets were Tx on port {1}\n".format(opackets, port)
+        print("{0} packets were Tx on port {1}\n".format(opackets, port))
 
     except STLError as e:
-        print e
+        print(e)
 
     finally:
         c.disconnect()
diff --git a/scripts/automation/trex_control_plane/stl/examples/stl_profile.py b/scripts/automation/trex_control_plane/stl/examples/stl_profile.py
index ad9d525a..3ae5f855 100644
--- a/scripts/automation/trex_control_plane/stl/examples/stl_profile.py
+++ b/scripts/automation/trex_control_plane/stl/examples/stl_profile.py
@@ -24,11 +24,11 @@ def simple ():
         try:
             profile = STLProfile.load(profile_file)
         except STLError as e:
-            print format_text("\nError while loading profile '{0}'\n".format(opts.file[0]), 'bold')
-            print e.brief() + "\n"
+            print(format_text("\nError while loading profile '{0}'\n".format(opts.file[0]), 'bold'))
+            print(e.brief() + "\n")
             return
 
-        print profile.dump_to_yaml()
+        print(profile.dump_to_yaml())
 
         c.remove_all_streams(my_ports)
 
@@ -43,15 +43,15 @@ def simple ():
 
     except STLError as e:
         passed = False
-        print e
+        print(e)
 
     finally:
         c.disconnect()
 
     if passed:
-        print "\nTest has passed :-)\n"
+        print("\nTest has passed :-)\n")
     else:
-        print "\nTest has failed :-(\n"
+        print("\nTest has failed :-(\n")
 
 
 # run the tests
diff --git a/scripts/automation/trex_control_plane/stl/examples/stl_run_udp_simple.py b/scripts/automation/trex_control_plane/stl/examples/stl_run_udp_simple.py
index 465b3dde..d06414e4 100644
--- a/scripts/automation/trex_control_plane/stl/examples/stl_run_udp_simple.py
+++ b/scripts/automation/trex_control_plane/stl/examples/stl_run_udp_simple.py
@@ -108,7 +108,7 @@ def simple_burst (duration = 10, frame_size = 9000, speed = '1gbps'):
         c.clear_stats()
 
         # choose rate and start traffic for 10 seconds on 5 mpps
-        print "Running {0} on ports 0, 1 for 10 seconds, UDP {1}...".format(speed,frame_size+4)
+        print("Running {0} on ports 0, 1 for 10 seconds, UDP {1}...".format(speed,frame_size+4))
         c.start(ports = [0, 1], mult = speed, duration = duration)
 
         # block until done
@@ -118,14 +118,14 @@ def simple_burst (duration = 10, frame_size = 9000, speed = '1gbps'):
         stats = c.get_stats()
 
         #print stats
-        print json.dumps(stats[0], indent = 4, separators=(',', ': '), sort_keys = True)
-        print json.dumps(stats[1], indent = 4, separators=(',', ': '), sort_keys = True)
+        print(json.dumps(stats[0], indent = 4, separators=(',', ': '), sort_keys = True))
+        print(json.dumps(stats[1], indent = 4, separators=(',', ': '), sort_keys = True))
 
         lost_a = stats[0]["opackets"] - stats[1]["ipackets"]
         lost_b = stats[1]["opackets"] - stats[0]["ipackets"]
 
-        print "\npackets lost from 0 --> 1:   {0} pkts".format(lost_a)
-        print "packets lost from 1 --> 0:   {0} pkts".format(lost_b)
+        print("\npackets lost from 0 --> 1:   {0} pkts".format(lost_a))
+        print("packets lost from 1 --> 0:   {0} pkts".format(lost_b))
 
         if (lost_a == 0) and (lost_b == 0):
             passed = True
@@ -134,15 +134,15 @@ def simple_burst (duration = 10, frame_size = 9000, speed = '1gbps'):
 
     except STLError as e:
         passed = False
-        print e
+        print(e)
 
     finally:
         c.disconnect()
 
     if passed:
-        print "\nPASSED\n"
+        print("\nPASSED\n")
     else:
-        print "\nFAILED\n"
+        print("\nFAILED\n")
 
 def process_options ():
     parser = argparse.ArgumentParser(usage=""" 
@@ -202,7 +202,7 @@ def process_options ():
                         version=H_VER )
 
     t_global.args = parser.parse_args();
-    print t_global.args
+    print(t_global.args)
 
 
 
diff --git a/scripts/automation/trex_control_plane/stl/examples/stl_simple_burst.py b/scripts/automation/trex_control_plane/stl/examples/stl_simple_burst.py
index ed0cb93a..29341674 100644
--- a/scripts/automation/trex_control_plane/stl/examples/stl_simple_burst.py
+++ b/scripts/automation/trex_control_plane/stl/examples/stl_simple_burst.py
@@ -33,7 +33,7 @@ def simple_burst ():
         stream_ids = c.add_streams([s1, s2], ports = [0, 3])
 
         # run 5 times
-        for i in xrange(1, 6):
+        for i in range(1, 6):
             c.clear_stats()
             c.start(ports = [0, 3], mult = "1gbps")
             c.wait_on_traffic(ports = [0, 3])
@@ -41,22 +41,22 @@ def simple_burst ():
             stats = c.get_stats()
             ipackets  = stats['total']['ipackets']
 
-            print "Test iteration {0} - Packets Received: {1} ".format(i, ipackets)
+            print("Test iteration {0} - Packets Received: {1} ".format(i, ipackets))
             # (5000 + 3000) * 2 ports = 16,000
             if (ipackets != (16000)):
                 passed = False
 
     except STLError as e:
         passed = False
-        print e
+        print(e)
 
     finally:
         c.disconnect()
 
     if passed:
-        print "\nTest has passed :-)\n"
+        print("\nTest has passed :-)\n")
     else:
-        print "\nTest has failed :-(\n"
+        print("\nTest has failed :-(\n")
 
 
 # run the tests
diff --git a/scripts/automation/trex_control_plane/stl/examples/stl_simple_console_like.py b/scripts/automation/trex_control_plane/stl/examples/stl_simple_console_like.py
index dc9b2b2b..03909e65 100644
--- a/scripts/automation/trex_control_plane/stl/examples/stl_simple_console_like.py
+++ b/scripts/automation/trex_control_plane/stl/examples/stl_simple_console_like.py
@@ -19,14 +19,14 @@ def simple ():
         # prepare our ports
         c.reset(ports = my_ports)
 
-        print (" is connected {0}".format(c.is_connected()))
+        print((" is connected {0}".format(c.is_connected())))
 
-        print (" number of ports {0}".format(c.get_port_count()))
-        print (" acquired_ports {0}".format(c.get_acquired_ports()))
+        print((" number of ports {0}".format(c.get_port_count())))
+        print((" acquired_ports {0}".format(c.get_acquired_ports())))
         # port stats
-        print c.get_stats(my_ports)
+        print(c.get_stats(my_ports))
         # port info
-        print c.get_port_info(my_ports)
+        print(c.get_port_info(my_ports))
 
         c.ping()
 
@@ -43,15 +43,15 @@ def simple ():
 
     except STLError as e:
         passed = False
-        print e
+        print(e)
 
     finally:
         c.disconnect()
 
     if passed:
-        print "\nTest has passed :-)\n"
+        print("\nTest has passed :-)\n")
     else:
-        print "\nTest has failed :-(\n"
+        print("\nTest has failed :-(\n")
 
 
 # run the tests