diff options
author | Ido Barnea <ibarnea@cisco.com> | 2017-02-05 15:21:19 +0200 |
---|---|---|
committer | Ido Barnea <ibarnea@cisco.com> | 2017-02-13 12:32:01 +0200 |
commit | 9ca4a157305e4e23a892ba9bafc9eee0f66954ce (patch) | |
tree | 1a8afcf815fd33e7623e3c16246abe86c01bc8fd /src/dpdk/drivers/net/ixgbe/rte_pmd_ixgbe.h | |
parent | 2dab8f65015e9fa90df395be6ee1a07e9ac71044 (diff) |
dpdk1702-rc2 upstream files unchanged + mlx5 driver rc3
Signed-off-by: Ido Barnea <ibarnea@cisco.com>
Diffstat (limited to 'src/dpdk/drivers/net/ixgbe/rte_pmd_ixgbe.h')
-rw-r--r-- | src/dpdk/drivers/net/ixgbe/rte_pmd_ixgbe.h | 412 |
1 files changed, 412 insertions, 0 deletions
diff --git a/src/dpdk/drivers/net/ixgbe/rte_pmd_ixgbe.h b/src/dpdk/drivers/net/ixgbe/rte_pmd_ixgbe.h new file mode 100644 index 00000000..4d7b507d --- /dev/null +++ b/src/dpdk/drivers/net/ixgbe/rte_pmd_ixgbe.h @@ -0,0 +1,412 @@ +/*- + * BSD LICENSE + * + * Copyright (c) 2016 Intel Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/** + * @file rte_pmd_ixgbe.h + * ixgbe PMD specific functions. + * + **/ + +#ifndef _PMD_IXGBE_H_ +#define _PMD_IXGBE_H_ + +#include <rte_ethdev.h> + +/** + * Set the VF MAC address. + * + * @param port + * The port identifier of the Ethernet device. + * @param vf + * VF id. + * @param mac_addr + * VF MAC address. + * @return + * - (0) if successful. + * - (-ENODEV) if *port* invalid. + * - (-EINVAL) if *vf* or *mac_addr* is invalid. + */ +int rte_pmd_ixgbe_set_vf_mac_addr(uint8_t port, uint16_t vf, + struct ether_addr *mac_addr); + +/** + * Enable/Disable VF VLAN anti spoofing. + * + * @param port + * The port identifier of the Ethernet device. + * @param vf + * VF on which to set VLAN anti spoofing. + * @param on + * 1 - Enable VFs VLAN anti spoofing. + * 0 - Disable VFs VLAN anti spoofing. + * @return + * - (0) if successful. + * - (-ENODEV) if *port* invalid. + * - (-EINVAL) if bad parameter. + */ +int rte_pmd_ixgbe_set_vf_vlan_anti_spoof(uint8_t port, uint16_t vf, uint8_t on); + +/** + * Enable/Disable VF MAC anti spoofing. + * + * @param port + * The port identifier of the Ethernet device. + * @param vf + * VF on which to set MAC anti spoofing. + * @param on + * 1 - Enable VFs MAC anti spoofing. + * 0 - Disable VFs MAC anti spoofing. + * @return + * - (0) if successful. + * - (-ENODEV) if *port* invalid. + * - (-EINVAL) if bad parameter. + */ +int rte_pmd_ixgbe_set_vf_mac_anti_spoof(uint8_t port, uint16_t vf, uint8_t on); + +/** + * Enable/Disable vf vlan insert + * + * @param port + * The port identifier of the Ethernet device. + * @param vf + * ID specifying VF. + * @param vlan_id + * 0 - Disable VF's vlan insert. + * n - Enable; n is inserted as the vlan id. + * + * @return + * - (0) if successful. + * - (-ENODEV) if *port* invalid. + * - (-EINVAL) if bad parameter. + */ +int rte_pmd_ixgbe_set_vf_vlan_insert(uint8_t port, uint16_t vf, + uint16_t vlan_id); + +/** + * Enable/Disable tx loopback + * + * @param port + * The port identifier of the Ethernet device. + * @param on + * 1 - Enable tx loopback. + * 0 - Disable tx loopback. + * + * @return + * - (0) if successful. + * - (-ENODEV) if *port* invalid. + * - (-EINVAL) if bad parameter. + */ +int rte_pmd_ixgbe_set_tx_loopback(uint8_t port, uint8_t on); + +/** + * set all queues drop enable bit + * + * @param port + * The port identifier of the Ethernet device. + * @param on + * 1 - set the queue drop enable bit for all pools. + * 0 - reset the queue drop enable bit for all pools. + * + * @return + * - (0) if successful. + * - (-ENODEV) if *port* invalid. + * - (-EINVAL) if bad parameter. + */ +int rte_pmd_ixgbe_set_all_queues_drop_en(uint8_t port, uint8_t on); + +/** + * set drop enable bit in the VF split rx control register + * + * @param port + * The port identifier of the Ethernet device. + * @param vf + * ID specifying VF. + * @param on + * 1 - set the drop enable bit in the split rx control register. + * 0 - reset the drop enable bit in the split rx control register. + * + * @return + * - (0) if successful. + * - (-ENODEV) if *port* invalid. + * - (-EINVAL) if bad parameter. + */ + +int rte_pmd_ixgbe_set_vf_split_drop_en(uint8_t port, uint16_t vf, uint8_t on); + +/** + * Enable/Disable vf vlan strip for all queues in a pool + * + * @param port + * The port identifier of the Ethernet device. + * @param vf + * ID specifying VF. + * @param on + * 1 - Enable VF's vlan strip on RX queues. + * 0 - Disable VF's vlan strip on RX queues. + * + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support this feature. + * - (-ENODEV) if *port* invalid. + * - (-EINVAL) if bad parameter. + */ +int +rte_pmd_ixgbe_set_vf_vlan_stripq(uint8_t port, uint16_t vf, uint8_t on); + +/** + * Enable MACsec offload. + * + * @param port + * The port identifier of the Ethernet device. + * @param en + * 1 - Enable encryption (encrypt and add integrity signature). + * 0 - Disable encryption (only add integrity signature). + * @param rp + * 1 - Enable replay protection. + * 0 - Disable replay protection. + * @return + * - (0) if successful. + * - (-ENODEV) if *port* invalid. + * - (-ENOTSUP) if hardware doesn't support this feature. + */ +int rte_pmd_ixgbe_macsec_enable(uint8_t port, uint8_t en, uint8_t rp); + +/** + * Disable MACsec offload. + * + * @param port + * The port identifier of the Ethernet device. + * @return + * - (0) if successful. + * - (-ENODEV) if *port* invalid. + * - (-ENOTSUP) if hardware doesn't support this feature. + */ +int rte_pmd_ixgbe_macsec_disable(uint8_t port); + +/** + * Configure Tx SC (Secure Connection). + * + * @param port + * The port identifier of the Ethernet device. + * @param mac + * The MAC address on the local side. + * @return + * - (0) if successful. + * - (-ENODEV) if *port* invalid. + * - (-ENOTSUP) if hardware doesn't support this feature. + */ +int rte_pmd_ixgbe_macsec_config_txsc(uint8_t port, uint8_t *mac); + +/** + * Configure Rx SC (Secure Connection). + * + * @param port + * The port identifier of the Ethernet device. + * @param mac + * The MAC address on the remote side. + * @param pi + * The PI (port identifier) on the remote side. + * @return + * - (0) if successful. + * - (-ENODEV) if *port* invalid. + * - (-ENOTSUP) if hardware doesn't support this feature. + */ +int rte_pmd_ixgbe_macsec_config_rxsc(uint8_t port, uint8_t *mac, uint16_t pi); + +/** + * Enable Tx SA (Secure Association). + * + * @param port + * The port identifier of the Ethernet device. + * @param idx + * The SA to be enabled (0 or 1). + * @param an + * The association number on the local side. + * @param pn + * The packet number on the local side. + * @param key + * The key on the local side. + * @return + * - (0) if successful. + * - (-ENODEV) if *port* invalid. + * - (-ENOTSUP) if hardware doesn't support this feature. + * - (-EINVAL) if bad parameter. + */ +int rte_pmd_ixgbe_macsec_select_txsa(uint8_t port, uint8_t idx, uint8_t an, + uint32_t pn, uint8_t *key); + +/** + * Enable Rx SA (Secure Association). + * + * @param port + * The port identifier of the Ethernet device. + * @param idx + * The SA to be enabled (0 or 1) + * @param an + * The association number on the remote side. + * @param pn + * The packet number on the remote side. + * @param key + * The key on the remote side. + * @return + * - (0) if successful. + * - (-ENODEV) if *port* invalid. + * - (-ENOTSUP) if hardware doesn't support this feature. + * - (-EINVAL) if bad parameter. + */ +int rte_pmd_ixgbe_macsec_select_rxsa(uint8_t port, uint8_t idx, uint8_t an, + uint32_t pn, uint8_t *key); + +/** +* Set RX L2 Filtering mode of a VF of an Ethernet device. +* +* @param port +* The port identifier of the Ethernet device. +* @param vf +* VF id. +* @param rx_mask +* The RX mode mask, which is one or more of accepting Untagged Packets, +* packets that match the PFUTA table, Broadcast and Multicast Promiscuous. +* ETH_VMDQ_ACCEPT_UNTAG,ETH_VMDQ_ACCEPT_HASH_UC, +* ETH_VMDQ_ACCEPT_BROADCAST and ETH_VMDQ_ACCEPT_MULTICAST will be used +* in rx_mode. +* @param on +* 1 - Enable a VF RX mode. +* 0 - Disable a VF RX mode. +* @return +* - (0) if successful. +* - (-ENOTSUP) if hardware doesn't support. +* - (-ENODEV) if *port_id* invalid. +* - (-EINVAL) if bad parameter. +*/ +int +rte_pmd_ixgbe_set_vf_rxmode(uint8_t port, uint16_t vf, uint16_t rx_mask, uint8_t on); + +/** +* Enable or disable a VF traffic receive of an Ethernet device. +* +* @param port +* The port identifier of the Ethernet device. +* @param vf +* VF id. +* @param on +* 1 - Enable a VF traffic receive. +* 0 - Disable a VF traffic receive. +* @return +* - (0) if successful. +* - (-ENOTSUP) if hardware doesn't support. +* - (-ENODEV) if *port_id* invalid. +* - (-EINVAL) if bad parameter. +*/ +int +rte_pmd_ixgbe_set_vf_rx(uint8_t port, uint16_t vf, uint8_t on); + +/** +* Enable or disable a VF traffic transmit of the Ethernet device. +* +* @param port +* The port identifier of the Ethernet device. +* @param vf +* VF id. +* @param on +* 1 - Enable a VF traffic transmit. +* 0 - Disable a VF traffic transmit. +* @return +* - (0) if successful. +* - (-ENODEV) if *port_id* invalid. +* - (-ENOTSUP) if hardware doesn't support. +* - (-EINVAL) if bad parameter. +*/ +int +rte_pmd_ixgbe_set_vf_tx(uint8_t port, uint16_t vf, uint8_t on); + +/** +* Enable/Disable hardware VF VLAN filtering by an Ethernet device of +* received VLAN packets tagged with a given VLAN Tag Identifier. +* +* @param port +* The port identifier of the Ethernet device. +* @param vlan +* The VLAN Tag Identifier whose filtering must be enabled or disabled. +* @param vf_mask +* Bitmap listing which VFs participate in the VLAN filtering. +* @param vlan_on +* 1 - Enable VFs VLAN filtering. +* 0 - Disable VFs VLAN filtering. +* @return +* - (0) if successful. +* - (-ENOTSUP) if hardware doesn't support. +* - (-ENODEV) if *port_id* invalid. +* - (-EINVAL) if bad parameter. +*/ +int +rte_pmd_ixgbe_set_vf_vlan_filter(uint8_t port, uint16_t vlan, uint64_t vf_mask, uint8_t vlan_on); + +/** + * Set the rate limitation for a vf on an Ethernet device. + * + * @param port + * The port identifier of the Ethernet device. + * @param vf + * VF id. + * @param tx_rate + * The tx rate allocated from the total link speed for this VF id. + * @param q_msk + * The queue mask which need to set the rate. + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support this feature. + * - (-ENODEV) if *port_id* invalid. + * - (-EINVAL) if bad parameter. + */ +int rte_pmd_ixgbe_set_vf_rate_limit(uint8_t port, uint16_t vf, uint16_t tx_rate, uint64_t q_msk); + +/** + * Response sent back to ixgbe driver from user app after callback + */ +enum rte_pmd_ixgbe_mb_event_rsp { + RTE_PMD_IXGBE_MB_EVENT_NOOP_ACK, /**< skip mbox request and ACK */ + RTE_PMD_IXGBE_MB_EVENT_NOOP_NACK, /**< skip mbox request and NACK */ + RTE_PMD_IXGBE_MB_EVENT_PROCEED, /**< proceed with mbox request */ + RTE_PMD_IXGBE_MB_EVENT_MAX /**< max value of this enum */ +}; + +/** + * Data sent to the user application when the callback is executed. + */ +struct rte_pmd_ixgbe_mb_event_param { + uint16_t vfid; /**< Virtual Function number */ + uint16_t msg_type; /**< VF to PF message type, defined in ixgbe_mbx.h */ + uint16_t retval; /**< return value */ + void *msg; /**< pointer to message */ +}; +#endif /* _PMD_IXGBE_H_ */ |