summaryrefslogtreecommitdiffstats
path: root/scripts/automation/regression/setups/trex07/config.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'scripts/automation/regression/setups/trex07/config.yaml')
-rw-r--r--scripts/automation/regression/setups/trex07/config.yaml66
1 files changed, 66 insertions, 0 deletions
diff --git a/scripts/automation/regression/setups/trex07/config.yaml b/scripts/automation/regression/setups/trex07/config.yaml
new file mode 100644
index 00000000..beb73435
--- /dev/null
+++ b/scripts/automation/regression/setups/trex07/config.yaml
@@ -0,0 +1,66 @@
+################################################################
+#### T-Rex nightly test configuration file ####
+################################################################
+
+
+### T-Rex configuration:
+# hostname - can be DNS name or IP for the TRex machine for ssh to the box
+# password - root password for TRex machine
+# is_dual - should the TRex inject with -p ?
+# version_path - path to the t-rex version and executable
+# cores - how many cores should be used
+# latency - rate of latency packets injected by the TRex
+# modes - list of modes (tagging) of this setup (loopback etc.)
+# * loopback - Trex works via loopback. Router and TFTP configurations may be skipped.
+# * VM - Virtual OS (accept low CPU utilization in tests, latency can get spikes)
+# * virt_nics - NICs are virtual (VMXNET3 etc.)
+
+### Router configuration:
+# hostname - the router hostname as apears in ______# cli prefix
+# ip_address - the router's ip that can be used to communicate with
+# image - the desired imaged wished to be loaded as the router's running config
+# line_password - router password when access via Telent
+# en_password - router password when changing to "enable" mode
+# interfaces - an array of client-server pairs, representing the interfaces configurations of the router
+# configurations - an array of configurations that could possibly loaded into the router during the test.
+# The "clean" configuration is a mandatory configuration the router will load with to run the basic test bench
+
+### TFTP configuration:
+# hostname - the tftp hostname
+# ip_address - the tftp's ip address
+# images_path - the tftp's relative path in which the router's images are located
+
+### Test_misc configuration:
+# expected_bw - the "golden" bandwidth (in Gbps) results planned on receiving from the test
+
+trex:
+ hostname : csi-trex-07
+ cores : 4
+
+router:
+ model : ASR1001x
+ hostname : csi-asr-01
+ ip_address : 10.56.216.120
+ image : asr1001x-universalk9.03.13.02.S.154-3.S2-ext.SPA.bin
+ line_password : cisco
+ en_password : cisco
+ mgmt_interface : GigabitEthernet0
+ clean_config : clean_config.cfg
+ intf_masking : 255.255.255.0
+ ipv6_mask : 64
+ interfaces :
+ - client :
+ name : Te0/0/0
+ src_mac_addr : 0000.0001.0002
+ dest_mac_addr : 0000.0001.0001
+ server :
+ name : Te0/0/1
+ src_mac_addr : 0000.0002.0002
+ dest_mac_addr : 0000.0002.0001
+ vrf_name : null
+
+tftp:
+ hostname : ats-asr-srv-1
+ ip_address : 10.56.217.7
+ root_dir : /scratch/tftp/
+ images_path : /asr1001x/