diff options
Diffstat (limited to 'scripts')
| -rw-r--r-- | scripts/automation/regression/setups/trex17/benchmark.yaml | 62 | ||||
| -rw-r--r-- | scripts/automation/regression/setups/trex17/config.yaml | 39 |
2 files changed, 101 insertions, 0 deletions
diff --git a/scripts/automation/regression/setups/trex17/benchmark.yaml b/scripts/automation/regression/setups/trex17/benchmark.yaml new file mode 100644 index 00000000..e5459dce --- /dev/null +++ b/scripts/automation/regression/setups/trex17/benchmark.yaml @@ -0,0 +1,62 @@ +################################################################ +#### T-Rex benchmark configuration file #### +################################################################ + + +test_rx_check : + multiplier : 0.8 + cores : 1 + rx_sample_rate : 128 + exp_gbps : 0.5 + cpu_to_core_ratio : 37270000 + exp_bw : 1 + exp_latency : 1 + + +test_routing_imix_64 : + multiplier : 28 + cores : 1 + cpu_to_core_ratio : 280 + exp_latency : 1 + +test_routing_imix : + multiplier : 0.5 + cores : 1 + cpu_to_core_ratio : 1800 + exp_latency : 1 + +test_static_routing_imix : + stat_route_dict : + clients_start : 16.0.0.1 + servers_start : 48.0.0.1 + dual_port_mask : 1.0.0.0 + client_destination_mask : 255.0.0.0 + server_destination_mask : 255.0.0.0 + multiplier : 0.8 + cores : 1 + cpu_to_core_ratio : 1800 + exp_latency : 1 + +test_static_routing_imix_asymmetric: + stat_route_dict : + clients_start : 16.0.0.1 + servers_start : 48.0.0.1 + dual_port_mask : 1.0.0.0 + client_destination_mask : 255.0.0.0 + server_destination_mask : 255.0.0.0 + multiplier : 0.8 + cores : 1 + cpu_to_core_ratio : 1800 + exp_latency : 1 + +test_ipv6_simple : + multiplier : 0.5 + cores : 1 + cpu_to_core_ratio : 30070000 + cpu2core_custom_dev: YES + cpu2core_dev : 0.07 + + +test_jumbo: + multiplier : 2.8 + cores : 1
\ No newline at end of file diff --git a/scripts/automation/regression/setups/trex17/config.yaml b/scripts/automation/regression/setups/trex17/config.yaml new file mode 100644 index 00000000..cf490b85 --- /dev/null +++ b/scripts/automation/regression/setups/trex17/config.yaml @@ -0,0 +1,39 @@ +################################################################ +#### T-Rex nightly test configuration file #### +################################################################ + + +### T-Rex configuration: +# hostname - can be DNS name or IP for the TRex machine for ssh to the box +# password - root password for TRex machine +# is_dual - should the TRex inject with -p ? +# version_path - path to the t-rex version and executable +# cores - how many cores should be used +# latency - rate of latency packets injected by the Trex +# modes - list of modes (tagging) of this setup (loopback, virtual etc.) +# * loopback - Trex works via loopback. Router and TFTP configurations may be skipped. +# * VM - Virtual OS (accept low CPU utilization in tests, latency can get spikes) +# * virt_nics - NICs are virtual (VMXNET3 etc. have their limitations in tests) + +### Router configuration: +# hostname - the router hostname as apears in ______# cli prefix +# ip_address - the router's ip that can be used to communicate with +# image - the desired imaged wished to be loaded as the router's running config +# line_password - router password when access via Telent +# en_password - router password when changing to "enable" mode +# interfaces - an array of client-server pairs, representing the interfaces configurations of the router +# configurations - an array of configurations that could possibly loaded into the router during the test. +# The "clean" configuration is a mandatory configuration the router will load with to run the basic test bench + +### TFTP configuration: +# hostname - the tftp hostname +# ip_address - the tftp's ip address +# images_path - the tftp's relative path in which the router's images are located + +### Test_misc configuration: +# expected_bw - the "golden" bandwidth (in Gbps) results planned on receiving from the test + +trex: + hostname : csi-trex-17 + cores : 2 + modes : [loopback, virt_nics, VM] |