diff options
Diffstat (limited to 'src/dpdk/drivers/net/e1000/base/e1000_ich8lan.h')
| -rw-r--r-- | src/dpdk/drivers/net/e1000/base/e1000_ich8lan.h | 21 |
1 files changed, 20 insertions, 1 deletions
diff --git a/src/dpdk/drivers/net/e1000/base/e1000_ich8lan.h b/src/dpdk/drivers/net/e1000/base/e1000_ich8lan.h index 33e77fb8..bc4ed1dd 100644 --- a/src/dpdk/drivers/net/e1000/base/e1000_ich8lan.h +++ b/src/dpdk/drivers/net/e1000/base/e1000_ich8lan.h @@ -121,6 +121,18 @@ POSSIBILITY OF SUCH DAMAGE. #if !defined(EXTERNAL_RELEASE) || defined(ULP_SUPPORT) #define E1000_FEXTNVM7_DISABLE_SMB_PERST 0x00000020 #endif /* !EXTERNAL_RELEASE || ULP_SUPPORT */ +#define E1000_FEXTNVM9_IOSFSB_CLKGATE_DIS 0x00000800 +#define E1000_FEXTNVM9_IOSFSB_CLKREQ_DIS 0x00001000 +#define E1000_FEXTNVM11_DISABLE_PB_READ 0x00000200 +#define E1000_FEXTNVM11_DISABLE_MULR_FIX 0x00002000 + +/* bit24: RXDCTL thresholds granularity: 0 - cache lines, 1 - descriptors */ +#define E1000_RXDCTL_THRESH_UNIT_DESC 0x01000000 + +#define NVM_SIZE_MULTIPLIER 4096 /*multiplier for NVMS field*/ +#define E1000_FLASH_BASE_ADDR 0xE000 /*offset of NVM access regs*/ +#define E1000_CTRL_EXT_NVMVS 0x3 /*NVM valid sector */ +#define E1000_TARC0_CB_MULTIQ_3_REQ (1 << 28 | 1 << 29) #define PCIE_ICH8_SNOOP_ALL PCIE_NO_SNOOP_ALL #define E1000_ICH_RAR_ENTRIES 7 @@ -198,6 +210,10 @@ POSSIBILITY OF SUCH DAMAGE. #define I218_ULP_CONFIG1_INBAND_EXIT 0x0020 /* Inband on ULP exit */ #define I218_ULP_CONFIG1_WOL_HOST 0x0040 /* WoL Host on ULP exit */ #define I218_ULP_CONFIG1_RESET_TO_SMBUS 0x0100 /* Reset to SMBus mode */ +/* enable ULP even if when phy powered down via lanphypc */ +#define I218_ULP_CONFIG1_EN_ULP_LANPHYPC 0x0400 +/* disable clear of sticky ULP on PERST */ +#define I218_ULP_CONFIG1_DIS_CLR_STICKY_ON_PERST 0x0800 #define I218_ULP_CONFIG1_DISABLE_SMB_PERST 0x1000 /* Disable on PERST# */ #endif /* !EXTERNAL_RELEASE || ULP_SUPPORT */ @@ -234,9 +250,12 @@ POSSIBILITY OF SUCH DAMAGE. /* PHY Power Management Control */ #define HV_PM_CTRL PHY_REG(770, 17) -#define HV_PM_CTRL_PLL_STOP_IN_K1_GIGA 0x100 +#define HV_PM_CTRL_K1_CLK_REQ 0x200 #define HV_PM_CTRL_K1_ENABLE 0x4000 +#define I217_PLL_CLOCK_GATE_REG PHY_REG(772, 28) +#define I217_PLL_CLOCK_GATE_MASK 0x07FF + #define SW_FLAG_TIMEOUT 1000 /* SW Semaphore flag timeout in ms */ /* Inband Control */ |