1 files changed, 247 insertions, 70 deletions

diff --git a/src/dpdk/drivers/net/ixgbe/base/ixgbe_common.c b/src/dpdk/drivers/net/ixgbe/base/ixgbe_common.c
index 811875a4..96456678 100644
--- a/src/dpdk/drivers/net/ixgbe/base/ixgbe_common.c
+++ b/src/dpdk/drivers/net/ixgbe/base/ixgbe_common.c
@@ -113,6 +113,7 @@ s32 ixgbe_init_ops_generic(struct ixgbe_hw *hw)
 	mac->ops.led_off = ixgbe_led_off_generic;
 	mac->ops.blink_led_start = ixgbe_blink_led_start_generic;
 	mac->ops.blink_led_stop = ixgbe_blink_led_stop_generic;
+	mac->ops.init_led_link_act = ixgbe_init_led_link_act_generic;
 
 	/* RAR, Multicast, VLAN */
 	mac->ops.set_rar = ixgbe_set_rar_generic;
@@ -168,13 +169,24 @@ bool ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw)
 	switch (hw->phy.media_type) {
 	case ixgbe_media_type_fiber_qsfp:
 	case ixgbe_media_type_fiber:
-		hw->mac.ops.check_link(hw, &speed, &link_up, false);
-		/* if link is down, assume supported */
-		if (link_up)
-			supported = speed == IXGBE_LINK_SPEED_1GB_FULL ?
+		/* flow control autoneg black list */
+		switch (hw->device_id) {
+		case IXGBE_DEV_ID_X550EM_A_SFP:
+		case IXGBE_DEV_ID_X550EM_A_SFP_N:
+		case IXGBE_DEV_ID_X550EM_A_QSFP:
+		case IXGBE_DEV_ID_X550EM_A_QSFP_N:
+			supported = false;
+			break;
+		default:
+			hw->mac.ops.check_link(hw, &speed, &link_up, false);
+			/* if link is down, assume supported */
+			if (link_up)
+				supported = speed == IXGBE_LINK_SPEED_1GB_FULL ?
 				true : false;
-		else
-			supported = true;
+			else
+				supported = true;
+		}
+
 		break;
 	case ixgbe_media_type_backplane:
 		supported = true;
@@ -188,6 +200,9 @@ bool ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw)
 		case IXGBE_DEV_ID_X550T:
 		case IXGBE_DEV_ID_X550T1:
 		case IXGBE_DEV_ID_X550EM_X_10G_T:
+		case IXGBE_DEV_ID_X550EM_A_10G_T:
+		case IXGBE_DEV_ID_X550EM_A_1G_T:
+		case IXGBE_DEV_ID_X550EM_A_1G_T_L:
 			supported = true;
 			break;
 		default:
@@ -197,9 +212,10 @@ bool ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw)
 		break;
 	}
 
-	ERROR_REPORT2(IXGBE_ERROR_UNSUPPORTED,
-		      "Device %x does not support flow control autoneg",
-		      hw->device_id);
+	if (!supported)
+		ERROR_REPORT2(IXGBE_ERROR_UNSUPPORTED,
+			      "Device %x does not support flow control autoneg",
+			      hw->device_id);
 	return supported;
 }
 
@@ -371,6 +387,7 @@ s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw)
 {
 	s32 ret_val;
 	u32 ctrl_ext;
+	u16 device_caps;
 
 	DEBUGFUNC("ixgbe_start_hw_generic");
 
@@ -393,14 +410,31 @@ s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw)
 
 	/* Setup flow control */
 	ret_val = ixgbe_setup_fc(hw);
-	if (ret_val != IXGBE_SUCCESS)
-		goto out;
+	if (ret_val != IXGBE_SUCCESS && ret_val != IXGBE_NOT_IMPLEMENTED) {
+		DEBUGOUT1("Flow control setup failed, returning %d\n", ret_val);
+		return ret_val;
+	}
+
+	/* Cache bit indicating need for crosstalk fix */
+	switch (hw->mac.type) {
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X550EM_x:
+	case ixgbe_mac_X550EM_a:
+		hw->mac.ops.get_device_caps(hw, &device_caps);
+		if (device_caps & IXGBE_DEVICE_CAPS_NO_CROSSTALK_WR)
+			hw->need_crosstalk_fix = false;
+		else
+			hw->need_crosstalk_fix = true;
+		break;
+	default:
+		hw->need_crosstalk_fix = false;
+		break;
+	}
 
 	/* Clear adapter stopped flag */
 	hw->adapter_stopped = false;
 
-out:
-	return ret_val;
+	return IXGBE_SUCCESS;
 }
 
 /**
@@ -466,6 +500,12 @@ s32 ixgbe_init_hw_generic(struct ixgbe_hw *hw)
 		status = hw->mac.ops.start_hw(hw);
 	}
 
+	/* Initialize the LED link active for LED blink support */
+	hw->mac.ops.init_led_link_act(hw);
+
+	if (status != IXGBE_SUCCESS)
+		DEBUGOUT1("Failed to initialize HW, STATUS = %d\n", status);
+
 	return status;
 }
 
@@ -1046,7 +1086,7 @@ void ixgbe_set_lan_id_multi_port_pcie(struct ixgbe_hw *hw)
 	if (hw->device_id == IXGBE_DEV_ID_X550EM_A_SFP) {
 		hw->eeprom.ops.read(hw, IXGBE_EEPROM_CTRL_4, &ee_ctrl_4);
 		bus->instance_id = (ee_ctrl_4 & IXGBE_EE_CTRL_4_INST_ID) >>
-			IXGBE_EE_CTRL_4_INST_ID_SHIFT;
+				   IXGBE_EE_CTRL_4_INST_ID_SHIFT;
 	}
 }
 
@@ -1105,6 +1145,47 @@ s32 ixgbe_stop_adapter_generic(struct ixgbe_hw *hw)
 }
 
 /**
+ *  ixgbe_init_led_link_act_generic - Store the LED index link/activity.
+ *  @hw: pointer to hardware structure
+ *
+ *  Store the index for the link active LED. This will be used to support
+ *  blinking the LED.
+ **/
+s32 ixgbe_init_led_link_act_generic(struct ixgbe_hw *hw)
+{
+	struct ixgbe_mac_info *mac = &hw->mac;
+	u32 led_reg, led_mode;
+	u8 i;
+
+	led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+
+	/* Get LED link active from the LEDCTL register */
+	for (i = 0; i < 4; i++) {
+		led_mode = led_reg >> IXGBE_LED_MODE_SHIFT(i);
+
+		if ((led_mode & IXGBE_LED_MODE_MASK_BASE) ==
+		     IXGBE_LED_LINK_ACTIVE) {
+			mac->led_link_act = i;
+			return IXGBE_SUCCESS;
+		}
+	}
+
+	/*
+	 * If LEDCTL register does not have the LED link active set, then use
+	 * known MAC defaults.
+	 */
+	switch (hw->mac.type) {
+	case ixgbe_mac_X550EM_a:
+	case ixgbe_mac_X550EM_x:
+		mac->led_link_act = 1;
+		break;
+	default:
+		mac->led_link_act = 2;
+	}
+	return IXGBE_SUCCESS;
+}
+
+/**
  *  ixgbe_led_on_generic - Turns on the software controllable LEDs.
  *  @hw: pointer to hardware structure
  *  @index: led number to turn on
@@ -1115,6 +1196,9 @@ s32 ixgbe_led_on_generic(struct ixgbe_hw *hw, u32 index)
 
 	DEBUGFUNC("ixgbe_led_on_generic");
 
+	if (index > 3)
+		return IXGBE_ERR_PARAM;
+
 	/* To turn on the LED, set mode to ON. */
 	led_reg &= ~IXGBE_LED_MODE_MASK(index);
 	led_reg |= IXGBE_LED_ON << IXGBE_LED_MODE_SHIFT(index);
@@ -1135,6 +1219,9 @@ s32 ixgbe_led_off_generic(struct ixgbe_hw *hw, u32 index)
 
 	DEBUGFUNC("ixgbe_led_off_generic");
 
+	if (index > 3)
+		return IXGBE_ERR_PARAM;
+
 	/* To turn off the LED, set mode to OFF. */
 	led_reg &= ~IXGBE_LED_MODE_MASK(index);
 	led_reg |= IXGBE_LED_OFF << IXGBE_LED_MODE_SHIFT(index);
@@ -2851,7 +2938,7 @@ out:
  *  advertised settings
  **/
 s32 ixgbe_negotiate_fc(struct ixgbe_hw *hw, u32 adv_reg, u32 lp_reg,
-			      u32 adv_sym, u32 adv_asm, u32 lp_sym, u32 lp_asm)
+		       u32 adv_sym, u32 adv_asm, u32 lp_sym, u32 lp_asm)
 {
 	if ((!(adv_reg)) ||  (!(lp_reg))) {
 		ERROR_REPORT3(IXGBE_ERROR_UNSUPPORTED,
@@ -3323,7 +3410,7 @@ s32 prot_autoc_write_generic(struct ixgbe_hw *hw, u32 reg_val, bool locked)
  **/
 s32 ixgbe_enable_sec_rx_path_generic(struct ixgbe_hw *hw)
 {
-	int secrxreg;
+	u32 secrxreg;
 
 	DEBUGFUNC("ixgbe_enable_sec_rx_path_generic");
 
@@ -3370,6 +3457,9 @@ s32 ixgbe_blink_led_start_generic(struct ixgbe_hw *hw, u32 index)
 
 	DEBUGFUNC("ixgbe_blink_led_start_generic");
 
+	if (index > 3)
+		return IXGBE_ERR_PARAM;
+
 	/*
 	 * Link must be up to auto-blink the LEDs;
 	 * Force it if link is down.
@@ -3415,6 +3505,10 @@ s32 ixgbe_blink_led_stop_generic(struct ixgbe_hw *hw, u32 index)
 
 	DEBUGFUNC("ixgbe_blink_led_stop_generic");
 
+	if (index > 3)
+		return IXGBE_ERR_PARAM;
+
+
 	ret_val = hw->mac.ops.prot_autoc_read(hw, &locked, &autoc_reg);
 	if (ret_val != IXGBE_SUCCESS)
 		goto out;
@@ -3720,7 +3814,8 @@ s32 ixgbe_clear_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
 	}
 
 	/* was that the last pool using this rar? */
-	if (mpsar_lo == 0 && mpsar_hi == 0 && rar != 0)
+	if (mpsar_lo == 0 && mpsar_hi == 0 &&
+	    rar != 0 && rar != hw->mac.san_mac_rar_index)
 		hw->mac.ops.clear_rar(hw, rar);
 done:
 	return IXGBE_SUCCESS;
@@ -3887,7 +3982,8 @@ s32 ixgbe_set_vfta_generic(struct ixgbe_hw *hw, u32 vlan, u32 vind,
 	vfta_delta = 1 << (vlan % 32);
 	vfta = IXGBE_READ_REG(hw, IXGBE_VFTA(regidx));
 
-	/* vfta_delta represents the difference between the current value
+	/*
+	 * vfta_delta represents the difference between the current value
 	 * of vfta and the value we want in the register.  Since the diff
 	 * is an XOR mask we can just update the vfta using an XOR
 	 */
@@ -3920,7 +4016,7 @@ vfta_update:
  *  @vind: VMDq output index that maps queue to VLAN id in VLVFB
  *  @vlan_on: boolean flag to turn on/off VLAN in VLVF
  *  @vfta_delta: pointer to the difference between the current value of VFTA
- * and the desired value
+ *		 and the desired value
  *  @vfta: the desired value of the VFTA
  *  @vlvf_bypass: boolean flag indicating updating default pool is okay
  *
@@ -3947,6 +4043,7 @@ s32 ixgbe_set_vlvf_generic(struct ixgbe_hw *hw, u32 vlan, u32 vind,
 	 */
 	if (!(IXGBE_READ_REG(hw, IXGBE_VT_CTL) & IXGBE_VT_CTL_VT_ENABLE))
 		return IXGBE_SUCCESS;
+
 	vlvf_index = ixgbe_find_vlvf_slot(hw, vlan, vlvf_bypass);
 	if (vlvf_index < 0)
 		return vlvf_index;
@@ -3967,7 +4064,7 @@ s32 ixgbe_set_vlvf_generic(struct ixgbe_hw *hw, u32 vlan, u32 vind,
 		 * we run the risk of stray packets leaking into
 		 * the PF via the default pool
 		 */
-		if (vfta_delta)
+		if (*vfta_delta)
 			IXGBE_WRITE_REG(hw, IXGBE_VFTA(vlan / 32), vfta);
 
 		/* disable VLVF and clear remaining bit from pool */
@@ -3976,6 +4073,7 @@ s32 ixgbe_set_vlvf_generic(struct ixgbe_hw *hw, u32 vlan, u32 vind,
 
 		return IXGBE_SUCCESS;
 	}
+
 	/* If there are still bits set in the VLVFB registers
 	 * for the VLAN ID indicated we need to see if the
 	 * caller is requesting that we clear the VFTA entry bit.
@@ -4025,6 +4123,32 @@ s32 ixgbe_clear_vfta_generic(struct ixgbe_hw *hw)
 }
 
 /**
+ *  ixgbe_need_crosstalk_fix - Determine if we need to do cross talk fix
+ *  @hw: pointer to hardware structure
+ *
+ *  Contains the logic to identify if we need to verify link for the
+ *  crosstalk fix
+ **/
+static bool ixgbe_need_crosstalk_fix(struct ixgbe_hw *hw)
+{
+
+	/* Does FW say we need the fix */
+	if (!hw->need_crosstalk_fix)
+		return false;
+
+	/* Only consider SFP+ PHYs i.e. media type fiber */
+	switch (hw->mac.ops.get_media_type(hw)) {
+	case ixgbe_media_type_fiber:
+	case ixgbe_media_type_fiber_qsfp:
+		break;
+	default:
+		return false;
+	}
+
+	return true;
+}
+
+/**
  *  ixgbe_check_mac_link_generic - Determine link and speed status
  *  @hw: pointer to hardware structure
  *  @speed: pointer to link speed
@@ -4041,6 +4165,35 @@ s32 ixgbe_check_mac_link_generic(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
 
 	DEBUGFUNC("ixgbe_check_mac_link_generic");
 
+	/* If Crosstalk fix enabled do the sanity check of making sure
+	 * the SFP+ cage is full.
+	 */
+	if (ixgbe_need_crosstalk_fix(hw)) {
+		u32 sfp_cage_full;
+
+		switch (hw->mac.type) {
+		case ixgbe_mac_82599EB:
+			sfp_cage_full = IXGBE_READ_REG(hw, IXGBE_ESDP) &
+					IXGBE_ESDP_SDP2;
+			break;
+		case ixgbe_mac_X550EM_x:
+		case ixgbe_mac_X550EM_a:
+			sfp_cage_full = IXGBE_READ_REG(hw, IXGBE_ESDP) &
+					IXGBE_ESDP_SDP0;
+			break;
+		default:
+			/* sanity check - No SFP+ devices here */
+			sfp_cage_full = false;
+			break;
+		}
+
+		if (!sfp_cage_full) {
+			*link_up = false;
+			*speed = IXGBE_LINK_SPEED_UNKNOWN;
+			return IXGBE_SUCCESS;
+		}
+	}
+
 	/* clear the old state */
 	links_orig = IXGBE_READ_REG(hw, IXGBE_LINKS);
 
@@ -4082,11 +4235,18 @@ s32 ixgbe_check_mac_link_generic(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
 		break;
 	case IXGBE_LINKS_SPEED_100_82599:
 		*speed = IXGBE_LINK_SPEED_100_FULL;
-		if (hw->mac.type >= ixgbe_mac_X550) {
+		if (hw->mac.type == ixgbe_mac_X550) {
 			if (links_reg & IXGBE_LINKS_SPEED_NON_STD)
 				*speed = IXGBE_LINK_SPEED_5GB_FULL;
 		}
 		break;
+	case IXGBE_LINKS_SPEED_10_X550EM_A:
+		*speed = IXGBE_LINK_SPEED_UNKNOWN;
+		if (hw->device_id == IXGBE_DEV_ID_X550EM_A_1G_T ||
+		    hw->device_id == IXGBE_DEV_ID_X550EM_A_1G_T_L) {
+			*speed = IXGBE_LINK_SPEED_10_FULL;
+		}
+		break;
 	default:
 		*speed = IXGBE_LINK_SPEED_UNKNOWN;
 	}
@@ -4318,43 +4478,31 @@ u8 ixgbe_calculate_checksum(u8 *buffer, u32 length)
 }
 
 /**
- *  ixgbe_host_interface_command - Issue command to manageability block
+ *  ixgbe_hic_unlocked - Issue command to manageability block unlocked
  *  @hw: pointer to the HW structure
- *  @buffer: contains the command to write and where the return status will
- *   be placed
+ *  @buffer: command to write and where the return status will be placed
  *  @length: length of buffer, must be multiple of 4 bytes
  *  @timeout: time in ms to wait for command completion
- *  @return_data: read and return data from the buffer (true) or not (false)
- *   Needed because FW structures are big endian and decoding of
- *   these fields can be 8 bit or 16 bit based on command. Decoding
- *   is not easily understood without making a table of commands.
- *   So we will leave this up to the caller to read back the data
- *   in these cases.
  *
  *  Communicates with the manageability block. On success return IXGBE_SUCCESS
  *  else returns semaphore error when encountering an error acquiring
  *  semaphore or IXGBE_ERR_HOST_INTERFACE_COMMAND when command fails.
+ *
+ *  This function assumes that the IXGBE_GSSR_SW_MNG_SM semaphore is held
+ *  by the caller.
  **/
-s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u32 *buffer,
-				 u32 length, u32 timeout, bool return_data)
+s32 ixgbe_hic_unlocked(struct ixgbe_hw *hw, u32 *buffer, u32 length,
+		       u32 timeout)
 {
-	u32 hicr, i, bi, fwsts;
-	u32 hdr_size = sizeof(struct ixgbe_hic_hdr);
-	u16 buf_len;
+	u32 hicr, i, fwsts;
 	u16 dword_len;
-	s32 status;
 
-	DEBUGFUNC("ixgbe_host_interface_command");
+	DEBUGFUNC("ixgbe_hic_unlocked");
 
-	if (length == 0 || length > IXGBE_HI_MAX_BLOCK_BYTE_LENGTH) {
+	if (!length || length > IXGBE_HI_MAX_BLOCK_BYTE_LENGTH) {
 		DEBUGOUT1("Buffer length failure buffersize=%d.\n", length);
 		return IXGBE_ERR_HOST_INTERFACE_COMMAND;
 	}
-	/* Take management host interface semaphore */
-	status = hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_SW_MNG_SM);
-
-	if (status)
-		return status;
 
 	/* Set bit 9 of FWSTS clearing FW reset indication */
 	fwsts = IXGBE_READ_REG(hw, IXGBE_FWSTS);
@@ -4362,17 +4510,15 @@ s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u32 *buffer,
 
 	/* Check that the host interface is enabled. */
 	hicr = IXGBE_READ_REG(hw, IXGBE_HICR);
-	if ((hicr & IXGBE_HICR_EN) == 0) {
+	if (!(hicr & IXGBE_HICR_EN)) {
 		DEBUGOUT("IXGBE_HOST_EN bit disabled.\n");
-		status = IXGBE_ERR_HOST_INTERFACE_COMMAND;
-		goto rel_out;
+		return IXGBE_ERR_HOST_INTERFACE_COMMAND;
 	}
 
 	/* Calculate length in DWORDs. We must be DWORD aligned */
-	if ((length % (sizeof(u32))) != 0) {
+	if (length % sizeof(u32)) {
 		DEBUGOUT("Buffer length failure, not aligned to dword");
-		status = IXGBE_ERR_INVALID_ARGUMENT;
-		goto rel_out;
+		return IXGBE_ERR_INVALID_ARGUMENT;
 	}
 
 	dword_len = length >> 2;
@@ -4395,14 +4541,59 @@ s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u32 *buffer,
 	}
 
 	/* Check command completion */
-	if ((timeout != 0 && i == timeout) ||
+	if ((timeout && i == timeout) ||
 	    !(IXGBE_READ_REG(hw, IXGBE_HICR) & IXGBE_HICR_SV)) {
 		ERROR_REPORT1(IXGBE_ERROR_CAUTION,
 			     "Command has failed with no status valid.\n");
-		status = IXGBE_ERR_HOST_INTERFACE_COMMAND;
-		goto rel_out;
+		return IXGBE_ERR_HOST_INTERFACE_COMMAND;
 	}
 
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_host_interface_command - Issue command to manageability block
+ *  @hw: pointer to the HW structure
+ *  @buffer: contains the command to write and where the return status will
+ *   be placed
+ *  @length: length of buffer, must be multiple of 4 bytes
+ *  @timeout: time in ms to wait for command completion
+ *  @return_data: read and return data from the buffer (true) or not (false)
+ *   Needed because FW structures are big endian and decoding of
+ *   these fields can be 8 bit or 16 bit based on command. Decoding
+ *   is not easily understood without making a table of commands.
+ *   So we will leave this up to the caller to read back the data
+ *   in these cases.
+ *
+ *  Communicates with the manageability block. On success return IXGBE_SUCCESS
+ *  else returns semaphore error when encountering an error acquiring
+ *  semaphore or IXGBE_ERR_HOST_INTERFACE_COMMAND when command fails.
+ **/
+s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u32 *buffer,
+				 u32 length, u32 timeout, bool return_data)
+{
+	u32 hdr_size = sizeof(struct ixgbe_hic_hdr);
+	u16 dword_len;
+	u16 buf_len;
+	s32 status;
+	u32 bi;
+
+	DEBUGFUNC("ixgbe_host_interface_command");
+
+	if (length == 0 || length > IXGBE_HI_MAX_BLOCK_BYTE_LENGTH) {
+		DEBUGOUT1("Buffer length failure buffersize=%d.\n", length);
+		return IXGBE_ERR_HOST_INTERFACE_COMMAND;
+	}
+
+	/* Take management host interface semaphore */
+	status = hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_SW_MNG_SM);
+	if (status)
+		return status;
+
+	status = ixgbe_hic_unlocked(hw, buffer, length, timeout);
+	if (status)
+		goto rel_out;
+
 	if (!return_data)
 		goto rel_out;
 
@@ -4417,7 +4608,7 @@ s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u32 *buffer,
 
 	/* If there is any thing in data position pull it in */
 	buf_len = ((struct ixgbe_hic_hdr *)buffer)->buf_len;
-	if (buf_len == 0)
+	if (!buf_len)
 		goto rel_out;
 
 	if (length < buf_len + hdr_size) {
@@ -4455,13 +4646,15 @@ rel_out:
  *  semaphore or IXGBE_ERR_HOST_INTERFACE_COMMAND when command fails.
  **/
 s32 ixgbe_set_fw_drv_ver_generic(struct ixgbe_hw *hw, u8 maj, u8 min,
-				 u8 build, u8 sub)
+				 u8 build, u8 sub, u16 len,
+				 const char *driver_ver)
 {
 	struct ixgbe_hic_drv_info fw_cmd;
 	int i;
 	s32 ret_val = IXGBE_SUCCESS;
 
 	DEBUGFUNC("ixgbe_set_fw_drv_ver_generic");
+	UNREFERENCED_2PARAMETER(len, driver_ver);
 
 	fw_cmd.hdr.cmd = FW_CEM_CMD_DRIVER_INFO;
 	fw_cmd.hdr.buf_len = FW_CEM_CMD_DRIVER_INFO_LEN;
@@ -4923,14 +5116,6 @@ s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
 		speedcnt++;
 		highest_link_speed = IXGBE_LINK_SPEED_10GB_FULL;
 
-		/* If we already have link at this speed, just jump out */
-		status = ixgbe_check_link(hw, &link_speed, &link_up, false);
-		if (status != IXGBE_SUCCESS)
-			return status;
-
-		if ((link_speed == IXGBE_LINK_SPEED_10GB_FULL) && link_up)
-			goto out;
-
 		/* Set the module link speed */
 		switch (hw->phy.media_type) {
 		case ixgbe_media_type_fiber:
@@ -4981,14 +5166,6 @@ s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
 		if (highest_link_speed == IXGBE_LINK_SPEED_UNKNOWN)
 			highest_link_speed = IXGBE_LINK_SPEED_1GB_FULL;
 
-		/* If we already have link at this speed, just jump out */
-		status = ixgbe_check_link(hw, &link_speed, &link_up, false);
-		if (status != IXGBE_SUCCESS)
-			return status;
-
-		if ((link_speed == IXGBE_LINK_SPEED_1GB_FULL) && link_up)
-			goto out;
-
 		/* Set the module link speed */
 		switch (hw->phy.media_type) {
 		case ixgbe_media_type_fiber: