diff options
Diffstat (limited to 'src/dpdk/lib/librte_ether/rte_ethdev.h')
| -rw-r--r-- | src/dpdk/lib/librte_ether/rte_ethdev.h | 605 |
1 files changed, 328 insertions, 277 deletions
diff --git a/src/dpdk/lib/librte_ether/rte_ethdev.h b/src/dpdk/lib/librte_ether/rte_ethdev.h index 5339d3be..c17bbda8 100644 --- a/src/dpdk/lib/librte_ether/rte_ethdev.h +++ b/src/dpdk/lib/librte_ether/rte_ethdev.h @@ -182,6 +182,7 @@ extern "C" { #include <rte_pci.h> #include <rte_dev.h> #include <rte_devargs.h> +#include <rte_errno.h> #include "rte_ether.h" #include "rte_eth_ctrl.h" #include "rte_dev_info.h" @@ -190,6 +191,9 @@ struct rte_mbuf; /** * A structure used to retrieve statistics for an Ethernet port. + * Not all statistics fields in struct rte_eth_stats are supported + * by any type of network interface card (NIC). If any statistics + * field is not supported, its value is 0. */ struct rte_eth_stats { uint64_t ipackets; /**< Total number of successfully received packets. */ @@ -198,7 +202,7 @@ struct rte_eth_stats { uint64_t obytes; /**< Total number of successfully transmitted bytes. */ uint64_t imissed; /**< Total of RX packets dropped by the HW, - * because there are no available mbufs (i.e. RX queues are full). + * because there are no available buffer (i.e. RX queues are full). */ uint64_t ierrors; /**< Total number of erroneous received packets. */ uint64_t oerrors; /**< Total number of failed transmitted packets. */ @@ -255,6 +259,7 @@ struct rte_eth_stats { /** * A structure used to retrieve link-level information of an Ethernet port. */ +__extension__ struct rte_eth_link { uint32_t link_speed; /**< ETH_SPEED_NUM_ */ uint16_t link_duplex : 1; /**< ETH_LINK_[HALF/FULL]_DUPLEX */ @@ -346,6 +351,7 @@ struct rte_eth_rxmode { enum rte_eth_rx_mq_mode mq_mode; uint32_t max_rx_pkt_len; /**< Only used if jumbo_frame enabled. */ uint16_t split_hdr_size; /**< hdr buf size (header_split enabled).*/ + __extension__ uint16_t header_split : 1, /**< Header Split enable. */ hw_ip_checksum : 1, /**< IP/UDP/TCP checksum offload enable. */ hw_vlan_filter : 1, /**< VLAN filter enable. */ @@ -645,6 +651,7 @@ struct rte_eth_txmode { /* For i40e specifically */ uint16_t pvid; + __extension__ uint8_t hw_vlan_reject_tagged : 1, /**< If set, reject sending out tagged pkts */ hw_vlan_reject_untagged : 1, @@ -696,6 +703,29 @@ struct rte_eth_desc_lim { uint16_t nb_max; /**< Max allowed number of descriptors. */ uint16_t nb_min; /**< Min allowed number of descriptors. */ uint16_t nb_align; /**< Number of descriptors should be aligned to. */ + + /** + * Max allowed number of segments per whole packet. + * + * - For TSO packet this is the total number of data descriptors allowed + * by device. + * + * @see nb_mtu_seg_max + */ + uint16_t nb_seg_max; + + /** + * Max number of segments per one MTU. + * + * - For non-TSO packet, this is the maximum allowed number of segments + * in a single transmit packet. + * + * - For TSO packet each segment within the TSO may span up to this + * value. + * + * @see nb_seg_max + */ + uint16_t nb_mtu_seg_max; }; /** @@ -767,8 +797,6 @@ struct rte_fdir_conf { struct rte_eth_fdir_masks mask; struct rte_eth_fdir_flex_conf flex_conf; /**< Flex payload configuration. */ - // TREX_PATCH - uint8_t flexbytes_offset; }; /** @@ -853,6 +881,7 @@ struct rte_eth_conf { #define DEV_RX_OFFLOAD_TCP_LRO 0x00000010 #define DEV_RX_OFFLOAD_QINQ_STRIP 0x00000020 #define DEV_RX_OFFLOAD_OUTER_IPV4_CKSUM 0x00000040 +#define DEV_RX_OFFLOAD_MACSEC_STRIP 0x00000080 /** * TX offload capabilities of a device. @@ -866,6 +895,11 @@ struct rte_eth_conf { #define DEV_TX_OFFLOAD_UDP_TSO 0x00000040 #define DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM 0x00000080 /**< Used for tunneling packet. */ #define DEV_TX_OFFLOAD_QINQ_INSERT 0x00000100 +#define DEV_TX_OFFLOAD_VXLAN_TNL_TSO 0x00000200 /**< Used for tunneling packet. */ +#define DEV_TX_OFFLOAD_GRE_TNL_TSO 0x00000400 /**< Used for tunneling packet. */ +#define DEV_TX_OFFLOAD_IPIP_TNL_TSO 0x00000800 /**< Used for tunneling packet. */ +#define DEV_TX_OFFLOAD_GENEVE_TNL_TSO 0x00001000 /**< Used for tunneling packet. */ +#define DEV_TX_OFFLOAD_MACSEC_INSERT 0x00002000 /** * Ethernet device information @@ -930,23 +964,26 @@ struct rte_eth_txq_info { /** * An Ethernet device extended statistic structure * - * This structure is used by ethdev->eth_xstats_get() to provide - * statistics that are not provided in the generic rte_eth_stats + * This structure is used by rte_eth_xstats_get() to provide + * statistics that are not provided in the generic *rte_eth_stats* * structure. + * It maps a name id, corresponding to an index in the array returned + * by rte_eth_xstats_get_names(), to a statistic value. */ struct rte_eth_xstat { - uint64_t id; - uint64_t value; + uint64_t id; /**< The index in xstats name array. */ + uint64_t value; /**< The statistic counter value. */ }; /** - * A name-key lookup element for extended statistics. + * A name element for extended statistics. * - * This structure is used to map between names and ID numbers - * for extended ethernet statistics. + * An array of this structure is returned by rte_eth_xstats_get_names(). + * It lists the names of extended statistics for a PMD. The *rte_eth_xstat* + * structure references these names by their array index. */ struct rte_eth_xstat_name { - char name[RTE_ETH_XSTATS_NAME_SIZE]; + char name[RTE_ETH_XSTATS_NAME_SIZE]; /**< The statistic name. */ }; #define ETH_DCB_NUM_TCS 8 @@ -1142,6 +1179,10 @@ typedef uint32_t (*eth_rx_queue_count_t)(struct rte_eth_dev *dev, typedef int (*eth_rx_descriptor_done_t)(void *rxq, uint16_t offset); /**< @internal Check DD bit of specific RX descriptor */ +typedef int (*eth_fw_version_get_t)(struct rte_eth_dev *dev, + char *fw_version, size_t fw_size); +/**< @internal Get firmware information of an Ethernet device. */ + typedef void (*eth_rxq_info_get_t)(struct rte_eth_dev *dev, uint16_t rx_queue_id, struct rte_eth_rxq_info *qinfo); @@ -1183,6 +1224,11 @@ typedef uint16_t (*eth_tx_burst_t)(void *txq, uint16_t nb_pkts); /**< @internal Send output packets on a transmit queue of an Ethernet device. */ +typedef uint16_t (*eth_tx_prep_t)(void *txq, + struct rte_mbuf **tx_pkts, + uint16_t nb_pkts); +/**< @internal Prepare output packets on a transmit queue of an Ethernet device. */ + typedef int (*flow_ctrl_get_t)(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf); /**< @internal Get current flow control parameter on an Ethernet device */ @@ -1241,39 +1287,11 @@ typedef int (*eth_uc_all_hash_table_set_t)(struct rte_eth_dev *dev, uint8_t on); /**< @internal Set all Unicast Hash bitmap */ -typedef int (*eth_set_vf_rx_mode_t)(struct rte_eth_dev *dev, - uint16_t vf, - uint16_t rx_mode, - uint8_t on); -/**< @internal Set a VF receive mode */ - -typedef int (*eth_set_vf_rx_t)(struct rte_eth_dev *dev, - uint16_t vf, - uint8_t on); -/**< @internal Set a VF receive mode */ - -typedef int (*eth_set_vf_tx_t)(struct rte_eth_dev *dev, - uint16_t vf, - uint8_t on); -/**< @internal Enable or disable a VF transmit */ - -typedef int (*eth_set_vf_vlan_filter_t)(struct rte_eth_dev *dev, - uint16_t vlan, - uint64_t vf_mask, - uint8_t vlan_on); -/**< @internal Set VF VLAN pool filter */ - typedef int (*eth_set_queue_rate_limit_t)(struct rte_eth_dev *dev, uint16_t queue_idx, uint16_t tx_rate); /**< @internal Set queue TX rate */ -typedef int (*eth_set_vf_rate_limit_t)(struct rte_eth_dev *dev, - uint16_t vf, - uint16_t tx_rate, - uint64_t q_msk); -/**< @internal Set VF TX rate */ - typedef int (*eth_mirror_rule_set_t)(struct rte_eth_dev *dev, struct rte_eth_mirror_conf *mirror_conf, uint8_t rule_id, @@ -1423,11 +1441,18 @@ struct eth_dev_ops { eth_dev_set_link_up_t dev_set_link_up; /**< Device link up. */ eth_dev_set_link_down_t dev_set_link_down; /**< Device link down. */ eth_dev_close_t dev_close; /**< Close device. */ + eth_link_update_t link_update; /**< Get device link state. */ + eth_promiscuous_enable_t promiscuous_enable; /**< Promiscuous ON. */ eth_promiscuous_disable_t promiscuous_disable;/**< Promiscuous OFF. */ eth_allmulticast_enable_t allmulticast_enable;/**< RX multicast ON. */ eth_allmulticast_disable_t allmulticast_disable;/**< RX multicast OF. */ - eth_link_update_t link_update; /**< Get device link state. */ + eth_mac_addr_remove_t mac_addr_remove; /**< Remove MAC address. */ + eth_mac_addr_add_t mac_addr_add; /**< Add a MAC address. */ + eth_mac_addr_set_t mac_addr_set; /**< Set a MAC address. */ + eth_set_mc_addr_list_t set_mc_addr_list; /**< set list of mcast addrs. */ + mtu_set_t mtu_set; /**< Set MTU. */ + eth_stats_get_t stats_get; /**< Get generic device statistics. */ eth_stats_reset_t stats_reset; /**< Reset generic device statistics. */ eth_xstats_get_t xstats_get; /**< Get extended device statistics. */ @@ -1436,109 +1461,93 @@ struct eth_dev_ops { /**< Get names of extended statistics. */ eth_queue_stats_mapping_set_t queue_stats_mapping_set; /**< Configure per queue stat counter mapping. */ + eth_dev_infos_get_t dev_infos_get; /**< Get device info. */ + eth_rxq_info_get_t rxq_info_get; /**< retrieve RX queue information. */ + eth_txq_info_get_t txq_info_get; /**< retrieve TX queue information. */ + eth_fw_version_get_t fw_version_get; /**< Get firmware version. */ eth_dev_supported_ptypes_get_t dev_supported_ptypes_get; - /**< Get packet types supported and identified by device*/ - mtu_set_t mtu_set; /**< Set MTU. */ - vlan_filter_set_t vlan_filter_set; /**< Filter VLAN Setup. */ - vlan_tpid_set_t vlan_tpid_set; /**< Outer/Inner VLAN TPID Setup. */ + /**< Get packet types supported and identified by device. */ + + vlan_filter_set_t vlan_filter_set; /**< Filter VLAN Setup. */ + vlan_tpid_set_t vlan_tpid_set; /**< Outer/Inner VLAN TPID Setup. */ vlan_strip_queue_set_t vlan_strip_queue_set; /**< VLAN Stripping on queue. */ vlan_offload_set_t vlan_offload_set; /**< Set VLAN Offload. */ - vlan_pvid_set_t vlan_pvid_set; /**< Set port based TX VLAN insertion */ - eth_queue_start_t rx_queue_start;/**< Start RX for a queue.*/ - eth_queue_stop_t rx_queue_stop;/**< Stop RX for a queue.*/ - eth_queue_start_t tx_queue_start;/**< Start TX for a queue.*/ - eth_queue_stop_t tx_queue_stop;/**< Stop TX for a queue.*/ - eth_rx_queue_setup_t rx_queue_setup;/**< Set up device RX queue.*/ - eth_queue_release_t rx_queue_release;/**< Release RX queue.*/ - eth_rx_queue_count_t rx_queue_count; /**< Get Rx queue count. */ - eth_rx_descriptor_done_t rx_descriptor_done; /**< Check rxd DD bit */ - /**< Enable Rx queue interrupt. */ - eth_rx_enable_intr_t rx_queue_intr_enable; - /**< Disable Rx queue interrupt.*/ - eth_rx_disable_intr_t rx_queue_intr_disable; - eth_tx_queue_setup_t tx_queue_setup;/**< Set up device TX queue.*/ - eth_queue_release_t tx_queue_release;/**< Release TX queue.*/ + vlan_pvid_set_t vlan_pvid_set; /**< Set port based TX VLAN insertion. */ + + eth_queue_start_t rx_queue_start;/**< Start RX for a queue. */ + eth_queue_stop_t rx_queue_stop; /**< Stop RX for a queue. */ + eth_queue_start_t tx_queue_start;/**< Start TX for a queue. */ + eth_queue_stop_t tx_queue_stop; /**< Stop TX for a queue. */ + eth_rx_queue_setup_t rx_queue_setup;/**< Set up device RX queue. */ + eth_queue_release_t rx_queue_release; /**< Release RX queue. */ + eth_rx_queue_count_t rx_queue_count;/**< Get Rx queue count. */ + eth_rx_descriptor_done_t rx_descriptor_done; /**< Check rxd DD bit. */ + eth_rx_enable_intr_t rx_queue_intr_enable; /**< Enable Rx queue interrupt. */ + eth_rx_disable_intr_t rx_queue_intr_disable; /**< Disable Rx queue interrupt. */ + eth_tx_queue_setup_t tx_queue_setup;/**< Set up device TX queue. */ + eth_queue_release_t tx_queue_release; /**< Release TX queue. */ + eth_dev_led_on_t dev_led_on; /**< Turn on LED. */ eth_dev_led_off_t dev_led_off; /**< Turn off LED. */ + flow_ctrl_get_t flow_ctrl_get; /**< Get flow control. */ flow_ctrl_set_t flow_ctrl_set; /**< Setup flow control. */ - priority_flow_ctrl_set_t priority_flow_ctrl_set; /**< Setup priority flow control.*/ - eth_mac_addr_remove_t mac_addr_remove; /**< Remove MAC address */ - eth_mac_addr_add_t mac_addr_add; /**< Add a MAC address */ - eth_mac_addr_set_t mac_addr_set; /**< Set a MAC address */ - eth_uc_hash_table_set_t uc_hash_table_set; /**< Set Unicast Table Array */ - eth_uc_all_hash_table_set_t uc_all_hash_table_set; /**< Set Unicast hash bitmap */ - eth_mirror_rule_set_t mirror_rule_set; /**< Add a traffic mirror rule.*/ - eth_mirror_rule_reset_t mirror_rule_reset; /**< reset a traffic mirror rule.*/ - eth_set_vf_rx_mode_t set_vf_rx_mode; /**< Set VF RX mode */ - eth_set_vf_rx_t set_vf_rx; /**< enable/disable a VF receive */ - eth_set_vf_tx_t set_vf_tx; /**< enable/disable a VF transmit */ - eth_set_vf_vlan_filter_t set_vf_vlan_filter; /**< Set VF VLAN filter */ - /** Add UDP tunnel port. */ - eth_udp_tunnel_port_add_t udp_tunnel_port_add; - /** Del UDP tunnel port. */ - eth_udp_tunnel_port_del_t udp_tunnel_port_del; - eth_set_queue_rate_limit_t set_queue_rate_limit; /**< Set queue rate limit */ - eth_set_vf_rate_limit_t set_vf_rate_limit; /**< Set VF rate limit */ - /** Update redirection table. */ - reta_update_t reta_update; - /** Query redirection table. */ - reta_query_t reta_query; - - eth_get_reg_t get_reg; - /**< Get registers */ - eth_get_eeprom_length_t get_eeprom_length; - /**< Get eeprom length */ - eth_get_eeprom_t get_eeprom; - /**< Get eeprom data */ - eth_set_eeprom_t set_eeprom; - /**< Set eeprom */ - /* bypass control */ + priority_flow_ctrl_set_t priority_flow_ctrl_set; /**< Setup priority flow control. */ + + eth_uc_hash_table_set_t uc_hash_table_set; /**< Set Unicast Table Array. */ + eth_uc_all_hash_table_set_t uc_all_hash_table_set; /**< Set Unicast hash bitmap. */ + + eth_mirror_rule_set_t mirror_rule_set; /**< Add a traffic mirror rule. */ + eth_mirror_rule_reset_t mirror_rule_reset; /**< reset a traffic mirror rule. */ + + eth_udp_tunnel_port_add_t udp_tunnel_port_add; /** Add UDP tunnel port. */ + eth_udp_tunnel_port_del_t udp_tunnel_port_del; /** Del UDP tunnel port. */ + eth_l2_tunnel_eth_type_conf_t l2_tunnel_eth_type_conf; + /** Config ether type of l2 tunnel. */ + eth_l2_tunnel_offload_set_t l2_tunnel_offload_set; + /** Enable/disable l2 tunnel offload functions. */ + + eth_set_queue_rate_limit_t set_queue_rate_limit; /**< Set queue rate limit. */ + + rss_hash_update_t rss_hash_update; /** Configure RSS hash protocols. */ + rss_hash_conf_get_t rss_hash_conf_get; /** Get current RSS hash configuration. */ + reta_update_t reta_update; /** Update redirection table. */ + reta_query_t reta_query; /** Query redirection table. */ + + eth_get_reg_t get_reg; /**< Get registers. */ + eth_get_eeprom_length_t get_eeprom_length; /**< Get eeprom length. */ + eth_get_eeprom_t get_eeprom; /**< Get eeprom data. */ + eth_set_eeprom_t set_eeprom; /**< Set eeprom. */ + + /* bypass control */ #ifdef RTE_NIC_BYPASS - bypass_init_t bypass_init; - bypass_state_set_t bypass_state_set; - bypass_state_show_t bypass_state_show; - bypass_event_set_t bypass_event_set; - bypass_event_show_t bypass_event_show; - bypass_wd_timeout_set_t bypass_wd_timeout_set; - bypass_wd_timeout_show_t bypass_wd_timeout_show; - bypass_ver_show_t bypass_ver_show; - bypass_wd_reset_t bypass_wd_reset; + bypass_init_t bypass_init; + bypass_state_set_t bypass_state_set; + bypass_state_show_t bypass_state_show; + bypass_event_set_t bypass_event_set; + bypass_event_show_t bypass_event_show; + bypass_wd_timeout_set_t bypass_wd_timeout_set; + bypass_wd_timeout_show_t bypass_wd_timeout_show; + bypass_ver_show_t bypass_ver_show; + bypass_wd_reset_t bypass_wd_reset; #endif - /** Configure RSS hash protocols. */ - rss_hash_update_t rss_hash_update; - /** Get current RSS hash configuration. */ - rss_hash_conf_get_t rss_hash_conf_get; - eth_filter_ctrl_t filter_ctrl; - /**< common filter control. */ - eth_set_mc_addr_list_t set_mc_addr_list; /**< set list of mcast addrs */ - eth_rxq_info_get_t rxq_info_get; - /**< retrieve RX queue information. */ - eth_txq_info_get_t txq_info_get; - /**< retrieve TX queue information. */ + eth_filter_ctrl_t filter_ctrl; /**< common filter control. */ + + eth_get_dcb_info get_dcb_info; /** Get DCB information. */ + + eth_timesync_enable_t timesync_enable; /** Turn IEEE1588/802.1AS timestamping on. */ - eth_timesync_enable_t timesync_enable; + eth_timesync_disable_t timesync_disable; /** Turn IEEE1588/802.1AS timestamping off. */ - eth_timesync_disable_t timesync_disable; - /** Read the IEEE1588/802.1AS RX timestamp. */ eth_timesync_read_rx_timestamp_t timesync_read_rx_timestamp; - /** Read the IEEE1588/802.1AS TX timestamp. */ + /** Read the IEEE1588/802.1AS RX timestamp. */ eth_timesync_read_tx_timestamp_t timesync_read_tx_timestamp; - - /** Get DCB information */ - eth_get_dcb_info get_dcb_info; - /** Adjust the device clock.*/ - eth_timesync_adjust_time timesync_adjust_time; - /** Get the device clock time. */ - eth_timesync_read_time timesync_read_time; - /** Set the device clock time. */ - eth_timesync_write_time timesync_write_time; - /** Config ether type of l2 tunnel */ - eth_l2_tunnel_eth_type_conf_t l2_tunnel_eth_type_conf; - /** Enable/disable l2 tunnel offload functions */ - eth_l2_tunnel_offload_set_t l2_tunnel_offload_set; + /** Read the IEEE1588/802.1AS TX timestamp. */ + eth_timesync_adjust_time timesync_adjust_time; /** Adjust the device clock. */ + eth_timesync_read_time timesync_read_time; /** Get the device clock time. */ + eth_timesync_write_time timesync_write_time; /** Set the device clock time. */ }; /** @@ -1605,17 +1614,6 @@ struct rte_eth_rxtx_callback { }; /** - * The eth device type. - */ -enum rte_eth_dev_type { - RTE_ETH_DEV_UNKNOWN, /**< unknown device type */ - RTE_ETH_DEV_PCI, - /**< Physical function and Virtual function of PCI devices */ - RTE_ETH_DEV_VIRTUAL, /**< non hardware device */ - RTE_ETH_DEV_MAX /**< max value of this enum */ -}; - -/** * @internal * The generic data structure associated with each ethernet device. * @@ -1628,10 +1626,12 @@ enum rte_eth_dev_type { struct rte_eth_dev { eth_rx_burst_t rx_pkt_burst; /**< Pointer to PMD receive function. */ eth_tx_burst_t tx_pkt_burst; /**< Pointer to PMD transmit function. */ + eth_tx_prep_t tx_pkt_prepare; /**< Pointer to PMD transmit prepare function. */ struct rte_eth_dev_data *data; /**< Pointer to device data */ const struct eth_driver *driver;/**< Driver for this device */ const struct eth_dev_ops *dev_ops; /**< Functions exported by PMD */ - struct rte_pci_device *pci_dev; /**< PCI info. supplied by probing */ + struct rte_device *device; /**< Backing device */ + struct rte_intr_handle *intr_handle; /**< Device interrupt handle */ /** User application callbacks for NIC interrupts */ struct rte_eth_dev_cb_list link_intr_cbs; /** @@ -1645,7 +1645,6 @@ struct rte_eth_dev { */ struct rte_eth_rxtx_callback *pre_tx_burst_cbs[RTE_MAX_QUEUES_PER_PORT]; uint8_t attached; /**< Flag indicating the port is attached */ - enum rte_eth_dev_type dev_type; /**< Flag indicating the device type */ } __rte_cache_aligned; struct rte_eth_dev_sriov { @@ -1693,6 +1692,7 @@ struct rte_eth_dev_data { struct ether_addr* hash_mac_addrs; /** Device Ethernet MAC addresses of hash filtering. */ uint8_t port_id; /**< Device [external] port identifier. */ + __extension__ uint8_t promiscuous : 1, /**< RX promiscuous mode ON(1) / OFF(0). */ scattered_rx : 1, /**< RX of scattered packets is ON(1) / OFF(0) */ all_multicast : 1, /**< RX all multicast mode ON(1) / OFF(0). */ @@ -1758,8 +1758,7 @@ struct rte_eth_dev *rte_eth_dev_allocated(const char *name); * @return * - Slot in the rte_dev_devices array for a new device; */ -struct rte_eth_dev *rte_eth_dev_allocate(const char *name, - enum rte_eth_dev_type type); +struct rte_eth_dev *rte_eth_dev_allocate(const char *name); /** * @internal @@ -1778,7 +1777,7 @@ int rte_eth_dev_release_port(struct rte_eth_dev *eth_dev); * @param devargs * A pointer to a strings array describing the new device * to be attached. The strings should be a pci address like - * '0000:01:00.0' or virtual device name like 'eth_pcap0'. + * '0000:01:00.0' or virtual device name like 'net_pcap0'. * @param port_id * A pointer to a port identifier actually attached. * @return @@ -1873,18 +1872,6 @@ struct eth_driver { }; /** - * @internal - * A function invoked by the initialization function of an Ethernet driver - * to simultaneously register itself as a PCI driver and as an Ethernet - * Poll Mode Driver (PMD). - * - * @param eth_drv - * The pointer to the *eth_driver* structure associated with - * the Ethernet driver. - */ -void rte_eth_driver_register(struct eth_driver *eth_drv); - -/** * Convert a numerical speed in Mbps to a bitmap flag that can be used in * the bitmap link_speeds of the struct rte_eth_conf * @@ -1930,6 +1917,19 @@ int rte_eth_dev_configure(uint8_t port_id, uint16_t nb_rx_queue, uint16_t nb_tx_queue, const struct rte_eth_conf *eth_conf); /** + * @internal + * Release device queues and clear its configuration to force the user + * application to reconfigure it. It is for internal use only. + * + * @param dev + * Pointer to struct rte_eth_dev. + * + * @return + * void + */ +void _rte_eth_dev_reset(struct rte_eth_dev *dev); + +/** * Allocate and set up a receive queue for an Ethernet device. * * The function allocates a contiguous block of memory for *nb_rx_desc* @@ -2288,18 +2288,19 @@ void rte_eth_stats_reset(uint8_t port_id); * @param port_id * The port identifier of the Ethernet device. * @param xstats_names - * Block of memory to insert names into. Must be at least size in capacity. - * If set to NULL, function returns required capacity. + * An rte_eth_xstat_name array of at least *size* elements to + * be filled. If set to NULL, the function returns the required number + * of elements. * @param size - * Capacity of xstats_names (number of names). + * The size of the xstats_names array (number of elements). * @return - * - positive value lower or equal to size: success. The return value + * - A positive value lower or equal to size: success. The return value * is the number of entries filled in the stats table. - * - positive value higher than size: error, the given statistics table + * - A positive value higher than size: error, the given statistics table * is too small. The return value corresponds to the size that should * be given to succeed. The entries in the table are not valid and * shall not be used by the caller. - * - negative value on error (invalid port id) + * - A negative value on error (invalid port id). */ int rte_eth_xstats_get_names(uint8_t port_id, struct rte_eth_xstat_name *xstats_names, @@ -2312,19 +2313,20 @@ int rte_eth_xstats_get_names(uint8_t port_id, * The port identifier of the Ethernet device. * @param xstats * A pointer to a table of structure of type *rte_eth_xstat* - * to be filled with device statistics ids and values. + * to be filled with device statistics ids and values: id is the + * index of the name string in xstats_names (see rte_eth_xstats_get_names()), + * and value is the statistic counter. * This parameter can be set to NULL if n is 0. * @param n - * The size of the stats table, which should be large enough to store - * all the statistics of the device. + * The size of the xstats array (number of elements). * @return - * - positive value lower or equal to n: success. The return value + * - A positive value lower or equal to n: success. The return value * is the number of entries filled in the stats table. - * - positive value higher than n: error, the given statistics table + * - A positive value higher than n: error, the given statistics table * is too small. The return value corresponds to the size that should * be given to succeed. The entries in the table are not valid and * shall not be used by the caller. - * - negative value on error (invalid port id) + * - A negative value on error (invalid port id). */ int rte_eth_xstats_get(uint8_t port_id, struct rte_eth_xstat *xstats, unsigned n); @@ -2401,6 +2403,27 @@ void rte_eth_macaddr_get(uint8_t port_id, struct ether_addr *mac_addr); void rte_eth_dev_info_get(uint8_t port_id, struct rte_eth_dev_info *dev_info); /** + * Retrieve the firmware version of a device. + * + * @param port_id + * The port identifier of the device. + * @param fw_version + * A pointer to a string array storing the firmware version of a device, + * the string includes terminating null. This pointer is allocated by caller. + * @param fw_size + * The size of the string array pointed by fw_version, which should be + * large enough to store firmware version of the device. + * @return + * - (0) if successful. + * - (-ENOTSUP) if operation is not supported. + * - (-ENODEV) if *port_id* invalid. + * - (>0) if *fw_size* is not enough to store firmware version, return + * the size of the non truncated string. + */ +int rte_eth_dev_fw_version_get(uint8_t port_id, + char *fw_version, size_t fw_size); + +/** * Retrieve the supported packet types of an Ethernet device. * * When a packet type is announced as supported, it *must* be recognized by @@ -2835,6 +2858,115 @@ rte_eth_tx_burst(uint8_t port_id, uint16_t queue_id, return (*dev->tx_pkt_burst)(dev->data->tx_queues[queue_id], tx_pkts, nb_pkts); } +/** + * @warning + * @b EXPERIMENTAL: this API may change without prior notice + * + * Process a burst of output packets on a transmit queue of an Ethernet device. + * + * The rte_eth_tx_prepare() function is invoked to prepare output packets to be + * transmitted on the output queue *queue_id* of the Ethernet device designated + * by its *port_id*. + * The *nb_pkts* parameter is the number of packets to be prepared which are + * supplied in the *tx_pkts* array of *rte_mbuf* structures, each of them + * allocated from a pool created with rte_pktmbuf_pool_create(). + * For each packet to send, the rte_eth_tx_prepare() function performs + * the following operations: + * + * - Check if packet meets devices requirements for tx offloads. + * + * - Check limitations about number of segments. + * + * - Check additional requirements when debug is enabled. + * + * - Update and/or reset required checksums when tx offload is set for packet. + * + * Since this function can modify packet data, provided mbufs must be safely + * writable (e.g. modified data cannot be in shared segment). + * + * The rte_eth_tx_prepare() function returns the number of packets ready to be + * sent. A return value equal to *nb_pkts* means that all packets are valid and + * ready to be sent, otherwise stops processing on the first invalid packet and + * leaves the rest packets untouched. + * + * When this functionality is not implemented in the driver, all packets are + * are returned untouched. + * + * @param port_id + * The port identifier of the Ethernet device. + * The value must be a valid port id. + * @param queue_id + * The index of the transmit queue through which output packets must be + * sent. + * The value must be in the range [0, nb_tx_queue - 1] previously supplied + * to rte_eth_dev_configure(). + * @param tx_pkts + * The address of an array of *nb_pkts* pointers to *rte_mbuf* structures + * which contain the output packets. + * @param nb_pkts + * The maximum number of packets to process. + * @return + * The number of packets correct and ready to be sent. The return value can be + * less than the value of the *tx_pkts* parameter when some packet doesn't + * meet devices requirements with rte_errno set appropriately: + * - -EINVAL: offload flags are not correctly set + * - -ENOTSUP: the offload feature is not supported by the hardware + * + */ + +#ifndef RTE_ETHDEV_TX_PREPARE_NOOP + +static inline uint16_t +rte_eth_tx_prepare(uint8_t port_id, uint16_t queue_id, + struct rte_mbuf **tx_pkts, uint16_t nb_pkts) +{ + struct rte_eth_dev *dev; + +#ifdef RTE_LIBRTE_ETHDEV_DEBUG + if (!rte_eth_dev_is_valid_port(port_id)) { + RTE_PMD_DEBUG_TRACE("Invalid TX port_id=%d\n", port_id); + rte_errno = -EINVAL; + return 0; + } +#endif + + dev = &rte_eth_devices[port_id]; + +#ifdef RTE_LIBRTE_ETHDEV_DEBUG + if (queue_id >= dev->data->nb_tx_queues) { + RTE_PMD_DEBUG_TRACE("Invalid TX queue_id=%d\n", queue_id); + rte_errno = -EINVAL; + return 0; + } +#endif + + if (!dev->tx_pkt_prepare) + return nb_pkts; + + return (*dev->tx_pkt_prepare)(dev->data->tx_queues[queue_id], + tx_pkts, nb_pkts); +} + +#else + +/* + * Native NOOP operation for compilation targets which doesn't require any + * preparations steps, and functional NOOP may introduce unnecessary performance + * drop. + * + * Generally this is not a good idea to turn it on globally and didn't should + * be used if behavior of tx_preparation can change. + */ + +static inline uint16_t +rte_eth_tx_prepare(__rte_unused uint8_t port_id, __rte_unused uint16_t queue_id, + __rte_unused struct rte_mbuf **tx_pkts, uint16_t nb_pkts) +{ + return nb_pkts; +} + +#endif + typedef void (*buffer_tx_error_fn)(struct rte_mbuf **unsent, uint16_t count, void *userdata); @@ -3049,6 +3181,8 @@ enum rte_eth_event_type { /**< queue state event (enabled/disabled) */ RTE_ETH_EVENT_INTR_RESET, /**< reset interrupt event, sent to VF on PF reset */ + RTE_ETH_EVENT_VF_MBOX, /**< message from the VF received by PF */ + RTE_ETH_EVENT_MACSEC, /**< MACsec offload related event */ RTE_ETH_EVENT_MAX /**< max value of this enum */ }; @@ -3070,6 +3204,11 @@ typedef void (*rte_eth_dev_cb_fn)(uint8_t port_id, \ * @param cb_arg * Pointer to the parameters for the registered callback. * + * The user data is overwritten in the case of RTE_ETH_EVENT_VF_MBOX. + * This even occurs when a message from the VF is received by the PF. + * The user data is overwritten with struct rte_pmd_ixgbe_mb_event_param. + * This struct is defined in rte_pmd_ixgbe.h. + * * @return * - On success, zero. * - On failure, a negative value. @@ -3108,12 +3247,16 @@ int rte_eth_dev_callback_unregister(uint8_t port_id, * Pointer to struct rte_eth_dev. * @param event * Eth device interrupt event type. + * @param cb_arg + * Update callback parameter to pass data back to user application. + * This allows the user application to decide if a particular function + * is permitted or not. * * @return * void */ void _rte_eth_dev_callback_process(struct rte_eth_dev *dev, - enum rte_eth_event_type event); + enum rte_eth_event_type event, void *cb_arg); /** * When there is no rx packet coming in Rx Queue for a long time, we can @@ -3409,93 +3552,6 @@ int rte_eth_dev_uc_hash_table_set(uint8_t port,struct ether_addr *addr, */ int rte_eth_dev_uc_all_hash_table_set(uint8_t port,uint8_t on); - /** - * Set RX L2 Filtering mode of a VF of an Ethernet device. - * - * @param port - * The port identifier of the Ethernet device. - * @param vf - * VF id. - * @param rx_mode - * The RX mode mask, which is one or more of accepting Untagged Packets, - * packets that match the PFUTA table, Broadcast and Multicast Promiscuous. - * ETH_VMDQ_ACCEPT_UNTAG,ETH_VMDQ_ACCEPT_HASH_UC, - * ETH_VMDQ_ACCEPT_BROADCAST and ETH_VMDQ_ACCEPT_MULTICAST will be used - * in rx_mode. - * @param on - * 1 - Enable a VF RX mode. - * 0 - Disable a VF RX mode. - * @return - * - (0) if successful. - * - (-ENOTSUP) if hardware doesn't support. - * - (-ENOTSUP) if hardware doesn't support. - * - (-EINVAL) if bad parameter. - */ -int rte_eth_dev_set_vf_rxmode(uint8_t port, uint16_t vf, uint16_t rx_mode, - uint8_t on); - -/** -* Enable or disable a VF traffic transmit of the Ethernet device. -* -* @param port -* The port identifier of the Ethernet device. -* @param vf -* VF id. -* @param on -* 1 - Enable a VF traffic transmit. -* 0 - Disable a VF traffic transmit. -* @return -* - (0) if successful. -* - (-ENODEV) if *port_id* invalid. -* - (-ENOTSUP) if hardware doesn't support. -* - (-EINVAL) if bad parameter. -*/ -int -rte_eth_dev_set_vf_tx(uint8_t port,uint16_t vf, uint8_t on); - -/** -* Enable or disable a VF traffic receive of an Ethernet device. -* -* @param port -* The port identifier of the Ethernet device. -* @param vf -* VF id. -* @param on -* 1 - Enable a VF traffic receive. -* 0 - Disable a VF traffic receive. -* @return -* - (0) if successful. -* - (-ENOTSUP) if hardware doesn't support. -* - (-ENODEV) if *port_id* invalid. -* - (-EINVAL) if bad parameter. -*/ -int -rte_eth_dev_set_vf_rx(uint8_t port,uint16_t vf, uint8_t on); - -/** -* Enable/Disable hardware VF VLAN filtering by an Ethernet device of -* received VLAN packets tagged with a given VLAN Tag Identifier. -* -* @param port id -* The port identifier of the Ethernet device. -* @param vlan_id -* The VLAN Tag Identifier whose filtering must be enabled or disabled. -* @param vf_mask -* Bitmap listing which VFs participate in the VLAN filtering. -* @param vlan_on -* 1 - Enable VFs VLAN filtering. -* 0 - Disable VFs VLAN filtering. -* @return -* - (0) if successful. -* - (-ENOTSUP) if hardware doesn't support. -* - (-ENODEV) if *port_id* invalid. -* - (-EINVAL) if bad parameter. -*/ -int -rte_eth_dev_set_vf_vlan_filter(uint8_t port, uint16_t vlan_id, - uint64_t vf_mask, - uint8_t vlan_on); - /** * Set a traffic mirroring rule on an Ethernet device * @@ -3557,26 +3613,6 @@ int rte_eth_set_queue_rate_limit(uint8_t port_id, uint16_t queue_idx, uint16_t tx_rate); /** - * Set the rate limitation for a vf on an Ethernet device. - * - * @param port_id - * The port identifier of the Ethernet device. - * @param vf - * VF id. - * @param tx_rate - * The tx rate allocated from the total link speed for this VF id. - * @param q_msk - * The queue mask which need to set the rate. - * @return - * - (0) if successful. - * - (-ENOTSUP) if hardware doesn't support this feature. - * - (-ENODEV) if *port_id* invalid. - * - (-EINVAL) if bad parameter. - */ -int rte_eth_set_vf_rate_limit(uint8_t port_id, uint16_t vf, - uint16_t tx_rate, uint64_t q_msk); - -/** * Initialize bypass logic. This function needs to be called before * executing any other bypass API. * @@ -4343,7 +4379,7 @@ rte_eth_dev_l2_tunnel_offload_set(uint8_t port_id, /** * Get the port id from pci adrress or device name -* Ex: 0000:2:00.0 or vdev name eth_pcap0 +* Ex: 0000:2:00.0 or vdev name net_pcap0 * * @param name * pci address or name of the device @@ -4370,6 +4406,21 @@ rte_eth_dev_get_port_by_name(const char *name, uint8_t *port_id); int rte_eth_dev_get_name_by_port(uint8_t port_id, char *name); +/** + * @internal + * Wrapper for use by pci drivers as a .probe function to attach to a ethdev + * interface. + */ +int rte_eth_dev_pci_probe(struct rte_pci_driver *pci_drv, + struct rte_pci_device *pci_dev); + +/** + * @internal + * Wrapper for use by pci drivers as a .remove function to detach a ethdev + * interface. + */ +int rte_eth_dev_pci_remove(struct rte_pci_device *pci_dev); + #ifdef __cplusplus } #endif |