diff options
Diffstat (limited to 'src/dpdk22/drivers/net/enic/base/vnic_devcmd.h')
-rw-r--r-- | src/dpdk22/drivers/net/enic/base/vnic_devcmd.h | 773 |
1 files changed, 0 insertions, 773 deletions
diff --git a/src/dpdk22/drivers/net/enic/base/vnic_devcmd.h b/src/dpdk22/drivers/net/enic/base/vnic_devcmd.h deleted file mode 100644 index b3d5a6cc..00000000 --- a/src/dpdk22/drivers/net/enic/base/vnic_devcmd.h +++ /dev/null @@ -1,773 +0,0 @@ -/* - * Copyright 2008-2010 Cisco Systems, Inc. All rights reserved. - * Copyright 2007 Nuova Systems, Inc. All rights reserved. - * - * Copyright (c) 2014, Cisco Systems, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - */ - -#ifndef _VNIC_DEVCMD_H_ -#define _VNIC_DEVCMD_H_ - -#define _CMD_NBITS 14 -#define _CMD_VTYPEBITS 10 -#define _CMD_FLAGSBITS 6 -#define _CMD_DIRBITS 2 - -#define _CMD_NMASK ((1 << _CMD_NBITS)-1) -#define _CMD_VTYPEMASK ((1 << _CMD_VTYPEBITS)-1) -#define _CMD_FLAGSMASK ((1 << _CMD_FLAGSBITS)-1) -#define _CMD_DIRMASK ((1 << _CMD_DIRBITS)-1) - -#define _CMD_NSHIFT 0 -#define _CMD_VTYPESHIFT (_CMD_NSHIFT+_CMD_NBITS) -#define _CMD_FLAGSSHIFT (_CMD_VTYPESHIFT+_CMD_VTYPEBITS) -#define _CMD_DIRSHIFT (_CMD_FLAGSSHIFT+_CMD_FLAGSBITS) - -/* - * Direction bits (from host perspective). - */ -#define _CMD_DIR_NONE 0U -#define _CMD_DIR_WRITE 1U -#define _CMD_DIR_READ 2U -#define _CMD_DIR_RW (_CMD_DIR_WRITE | _CMD_DIR_READ) - -/* - * Flag bits. - */ -#define _CMD_FLAGS_NONE 0U -#define _CMD_FLAGS_NOWAIT 1U - -/* - * vNIC type bits. - */ -#define _CMD_VTYPE_NONE 0U -#define _CMD_VTYPE_ENET 1U -#define _CMD_VTYPE_FC 2U -#define _CMD_VTYPE_SCSI 4U -#define _CMD_VTYPE_ALL (_CMD_VTYPE_ENET | _CMD_VTYPE_FC | _CMD_VTYPE_SCSI) - -/* - * Used to create cmds.. - */ -#define _CMDCF(dir, flags, vtype, nr) \ - (((dir) << _CMD_DIRSHIFT) | \ - ((flags) << _CMD_FLAGSSHIFT) | \ - ((vtype) << _CMD_VTYPESHIFT) | \ - ((nr) << _CMD_NSHIFT)) -#define _CMDC(dir, vtype, nr) _CMDCF(dir, 0, vtype, nr) -#define _CMDCNW(dir, vtype, nr) _CMDCF(dir, _CMD_FLAGS_NOWAIT, vtype, nr) - -/* - * Used to decode cmds.. - */ -#define _CMD_DIR(cmd) (((cmd) >> _CMD_DIRSHIFT) & _CMD_DIRMASK) -#define _CMD_FLAGS(cmd) (((cmd) >> _CMD_FLAGSSHIFT) & _CMD_FLAGSMASK) -#define _CMD_VTYPE(cmd) (((cmd) >> _CMD_VTYPESHIFT) & _CMD_VTYPEMASK) -#define _CMD_N(cmd) (((cmd) >> _CMD_NSHIFT) & _CMD_NMASK) - -enum vnic_devcmd_cmd { - CMD_NONE = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_NONE, 0), - - /* - * mcpu fw info in mem: - * in: - * (u64)a0=paddr to struct vnic_devcmd_fw_info - * action: - * Fills in struct vnic_devcmd_fw_info (128 bytes) - * note: - * An old definition of CMD_MCPU_FW_INFO - */ - CMD_MCPU_FW_INFO_OLD = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 1), - - /* - * mcpu fw info in mem: - * in: - * (u64)a0=paddr to struct vnic_devcmd_fw_info - * (u16)a1=size of the structure - * out: - * (u16)a1=0 for in:a1 = 0, - * data size actually written for other values. - * action: - * Fills in first 128 bytes of vnic_devcmd_fw_info for in:a1 = 0, - * first in:a1 bytes for 0 < in:a1 <= 132, - * 132 bytes for other values of in:a1. - * note: - * CMD_MCPU_FW_INFO and CMD_MCPU_FW_INFO_OLD have the same enum 1 - * for source compatibility. - */ - CMD_MCPU_FW_INFO = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 1), - - /* dev-specific block member: - * in: (u16)a0=offset,(u8)a1=size - * out: a0=value */ - CMD_DEV_SPEC = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 2), - - /* stats clear */ - CMD_STATS_CLEAR = _CMDCNW(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 3), - - /* stats dump in mem: (u64)a0=paddr to stats area, - * (u16)a1=sizeof stats area */ - CMD_STATS_DUMP = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 4), - - /* set Rx packet filter: (u32)a0=filters (see CMD_PFILTER_*) */ - CMD_PACKET_FILTER = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 7), - - /* set Rx packet filter for all: (u32)a0=filters (see CMD_PFILTER_*) */ - CMD_PACKET_FILTER_ALL = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 7), - - /* hang detection notification */ - CMD_HANG_NOTIFY = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 8), - - /* MAC address in (u48)a0 */ - CMD_GET_MAC_ADDR = _CMDC(_CMD_DIR_READ, - _CMD_VTYPE_ENET | _CMD_VTYPE_FC, 9), - - /* add addr from (u48)a0 */ - CMD_ADDR_ADD = _CMDCNW(_CMD_DIR_WRITE, - _CMD_VTYPE_ENET | _CMD_VTYPE_FC, 12), - - /* del addr from (u48)a0 */ - CMD_ADDR_DEL = _CMDCNW(_CMD_DIR_WRITE, - _CMD_VTYPE_ENET | _CMD_VTYPE_FC, 13), - - /* add VLAN id in (u16)a0 */ - CMD_VLAN_ADD = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 14), - - /* del VLAN id in (u16)a0 */ - CMD_VLAN_DEL = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 15), - - /* nic_cfg in (u32)a0 */ - CMD_NIC_CFG = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 16), - - /* union vnic_rss_key in mem: (u64)a0=paddr, (u16)a1=len */ - CMD_RSS_KEY = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 17), - - /* union vnic_rss_cpu in mem: (u64)a0=paddr, (u16)a1=len */ - CMD_RSS_CPU = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 18), - - /* initiate softreset */ - CMD_SOFT_RESET = _CMDCNW(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 19), - - /* softreset status: - * out: a0=0 reset complete, a0=1 reset in progress */ - CMD_SOFT_RESET_STATUS = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 20), - - /* set struct vnic_devcmd_notify buffer in mem: - * in: - * (u64)a0=paddr to notify (set paddr=0 to unset) - * (u32)a1 & 0x00000000ffffffff=sizeof(struct vnic_devcmd_notify) - * (u16)a1 & 0x0000ffff00000000=intr num (-1 for no intr) - * out: - * (u32)a1 = effective size - */ - CMD_NOTIFY = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 21), - - /* UNDI API: (u64)a0=paddr to s_PXENV_UNDI_ struct, - * (u8)a1=PXENV_UNDI_xxx */ - CMD_UNDI = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 22), - - /* initiate open sequence (u32)a0=flags (see CMD_OPENF_*) */ - CMD_OPEN = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 23), - - /* open status: - * out: a0=0 open complete, a0=1 open in progress */ - CMD_OPEN_STATUS = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 24), - - /* close vnic */ - CMD_CLOSE = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 25), - - /* initialize virtual link: (u32)a0=flags (see CMD_INITF_*) */ -/***** Replaced by CMD_INIT *****/ - CMD_INIT_v1 = _CMDCNW(_CMD_DIR_READ, _CMD_VTYPE_ALL, 26), - - /* variant of CMD_INIT, with provisioning info - * (u64)a0=paddr of vnic_devcmd_provinfo - * (u32)a1=sizeof provision info */ - CMD_INIT_PROV_INFO = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 27), - - /* enable virtual link */ - CMD_ENABLE = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 28), - - /* enable virtual link, waiting variant. */ - CMD_ENABLE_WAIT = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 28), - - /* disable virtual link */ - CMD_DISABLE = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 29), - - /* stats dump sum of all vnic stats on same uplink in mem: - * (u64)a0=paddr - * (u16)a1=sizeof stats area */ - CMD_STATS_DUMP_ALL = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 30), - - /* init status: - * out: a0=0 init complete, a0=1 init in progress - * if a0=0, a1=errno */ - CMD_INIT_STATUS = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 31), - - /* INT13 API: (u64)a0=paddr to vnic_int13_params struct - * (u32)a1=INT13_CMD_xxx */ - CMD_INT13 = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_FC, 32), - - /* logical uplink enable/disable: (u64)a0: 0/1=disable/enable */ - CMD_LOGICAL_UPLINK = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 33), - - /* undo initialize of virtual link */ - CMD_DEINIT = _CMDCNW(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 34), - - /* initialize virtual link: (u32)a0=flags (see CMD_INITF_*) */ - CMD_INIT = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 35), - - /* check fw capability of a cmd: - * in: (u32)a0=cmd - * out: (u32)a0=errno, 0:valid cmd, a1=supported VNIC_STF_* bits */ - CMD_CAPABILITY = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 36), - - /* persistent binding info - * in: (u64)a0=paddr of arg - * (u32)a1=CMD_PERBI_XXX */ - CMD_PERBI = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_FC, 37), - - /* Interrupt Assert Register functionality - * in: (u16)a0=interrupt number to assert - */ - CMD_IAR = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 38), - - /* initiate hangreset, like softreset after hang detected */ - CMD_HANG_RESET = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 39), - - /* hangreset status: - * out: a0=0 reset complete, a0=1 reset in progress */ - CMD_HANG_RESET_STATUS = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 40), - - /* - * Set hw ingress packet vlan rewrite mode: - * in: (u32)a0=new vlan rewrite mode - * out: (u32)a0=old vlan rewrite mode */ - CMD_IG_VLAN_REWRITE_MODE = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ENET, 41), - - /* - * in: (u16)a0=bdf of target vnic - * (u32)a1=cmd to proxy - * a2-a15=args to cmd in a1 - * out: (u32)a0=status of proxied cmd - * a1-a15=out args of proxied cmd */ - CMD_PROXY_BY_BDF = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 42), - - /* - * As for BY_BDF except a0 is index of hvnlink subordinate vnic - * or SR-IOV virtual vnic - */ - CMD_PROXY_BY_INDEX = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 43), - - /* - * For HPP toggle: - * adapter-info-get - * in: (u64)a0=phsical address of buffer passed in from caller. - * (u16)a1=size of buffer specified in a0. - * out: (u64)a0=phsical address of buffer passed in from caller. - * (u16)a1=actual bytes from VIF-CONFIG-INFO TLV, or - * 0 if no VIF-CONFIG-INFO TLV was ever received. */ - CMD_CONFIG_INFO_GET = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 44), - - /* - * INT13 API: (u64)a0=paddr to vnic_int13_params struct - * (u32)a1=INT13_CMD_xxx - */ - CMD_INT13_ALL = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 45), - - /* - * Set default vlan: - * in: (u16)a0=new default vlan - * (u16)a1=zero for overriding vlan with param a0, - * non-zero for resetting vlan to the default - * out: (u16)a0=old default vlan - */ - CMD_SET_DEFAULT_VLAN = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 46), - - /* init_prov_info2: - * Variant of CMD_INIT_PROV_INFO, where it will not try to enable - * the vnic until CMD_ENABLE2 is issued. - * (u64)a0=paddr of vnic_devcmd_provinfo - * (u32)a1=sizeof provision info */ - CMD_INIT_PROV_INFO2 = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 47), - - /* enable2: - * (u32)a0=0 ==> standby - * =CMD_ENABLE2_ACTIVE ==> active - */ - CMD_ENABLE2 = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 48), - - /* - * cmd_status: - * Returns the status of the specified command - * Input: - * a0 = command for which status is being queried. - * Possible values are: - * CMD_SOFT_RESET - * CMD_HANG_RESET - * CMD_OPEN - * CMD_INIT - * CMD_INIT_PROV_INFO - * CMD_DEINIT - * CMD_INIT_PROV_INFO2 - * CMD_ENABLE2 - * Output: - * if status == STAT_ERROR - * a0 = ERR_ENOTSUPPORTED - status for command in a0 is - * not supported - * if status == STAT_NONE - * a0 = status of the devcmd specified in a0 as follows. - * ERR_SUCCESS - command in a0 completed successfully - * ERR_EINPROGRESS - command in a0 is still in progress - */ - CMD_STATUS = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 49), - - /* - * Returns interrupt coalescing timer conversion factors. - * After calling this devcmd, ENIC driver can convert - * interrupt coalescing timer in usec into CPU cycles as follows: - * - * intr_timer_cycles = intr_timer_usec * multiplier / divisor - * - * Interrupt coalescing timer in usecs can be be converted/obtained - * from CPU cycles as follows: - * - * intr_timer_usec = intr_timer_cycles * divisor / multiplier - * - * in: none - * out: (u32)a0 = multiplier - * (u32)a1 = divisor - * (u32)a2 = maximum timer value in usec - */ - CMD_INTR_COAL_CONVERT = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 50), - - /* - * ISCSI DUMP API: - * in: (u64)a0=paddr of the param or param itself - * (u32)a1=ISCSI_CMD_xxx - */ - CMD_ISCSI_DUMP_REQ = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 51), - - /* - * ISCSI DUMP STATUS API: - * in: (u32)a0=cmd tag - * in: (u32)a1=ISCSI_CMD_xxx - * out: (u32)a0=cmd status - */ - CMD_ISCSI_DUMP_STATUS = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 52), - - /* - * Subvnic migration from MQ <--> VF. - * Enable the LIF migration from MQ to VF and vice versa. MQ and VF - * indexes are statically bound at the time of initialization. - * Based on the - * direction of migration, the resources of either MQ or the VF shall - * be attached to the LIF. - * in: (u32)a0=Direction of Migration - * 0=> Migrate to VF - * 1=> Migrate to MQ - * (u32)a1=VF index (MQ index) - */ - CMD_MIGRATE_SUBVNIC = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 53), - - - /* - * Register / Deregister the notification block for MQ subvnics - * in: - * (u64)a0=paddr to notify (set paddr=0 to unset) - * (u32)a1 & 0x00000000ffffffff=sizeof(struct vnic_devcmd_notify) - * (u16)a1 & 0x0000ffff00000000=intr num (-1 for no intr) - * out: - * (u32)a1 = effective size - */ - CMD_SUBVNIC_NOTIFY = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 54), - - /* - * Set the predefined mac address as default - * in: - * (u48)a0=mac addr - */ - CMD_SET_MAC_ADDR = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 55), - - /* Update the provisioning info of the given VIF - * (u64)a0=paddr of vnic_devcmd_provinfo - * (u32)a1=sizeof provision info */ - CMD_PROV_INFO_UPDATE = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 56), - - /* - * Initialization for the devcmd2 interface. - * in: (u64) a0=host result buffer physical address - * in: (u16) a1=number of entries in result buffer - */ - CMD_INITIALIZE_DEVCMD2 = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 57), - - /* - * Add a filter. - * in: (u64) a0= filter address - * (u32) a1= size of filter - * out: (u32) a0=filter identifier - */ - CMD_ADD_FILTER = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ENET, 58), - - /* - * Delete a filter. - * in: (u32) a0=filter identifier - */ - CMD_DEL_FILTER = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 59), - - /* - * Enable a Queue Pair in User space NIC - * in: (u32) a0=Queue Pair number - * (u32) a1= command - */ - CMD_QP_ENABLE = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 60), - - /* - * Disable a Queue Pair in User space NIC - * in: (u32) a0=Queue Pair number - * (u32) a1= command - */ - CMD_QP_DISABLE = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 61), - - /* - * Stats dump Queue Pair in User space NIC - * in: (u32) a0=Queue Pair number - * (u64) a1=host buffer addr for status dump - * (u32) a2=length of the buffer - */ - CMD_QP_STATS_DUMP = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 62), - - /* - * Clear stats for Queue Pair in User space NIC - * in: (u32) a0=Queue Pair number - */ - CMD_QP_STATS_CLEAR = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 63), - - /* - * Enable/Disable overlay offloads on the given vnic - * in: (u8) a0 = OVERLAY_FEATURE_NVGRE : NVGRE - * a0 = OVERLAY_FEATURE_VXLAN : VxLAN - * in: (u8) a1 = OVERLAY_OFFLOAD_ENABLE : Enable - * a1 = OVERLAY_OFFLOAD_DISABLE : Disable - */ - CMD_OVERLAY_OFFLOAD_ENABLE_DISABLE = - _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 72), - - /* - * Configuration of overlay offloads feature on a given vNIC - * in: (u8) a0 = DEVCMD_OVERLAY_NVGRE : NVGRE - * a0 = DEVCMD_OVERLAY_VXLAN : VxLAN - * in: (u8) a1 = VXLAN_PORT_UPDATE : VxLAN - * in: (u16) a2 = unsigned short int port information - */ - CMD_OVERLAY_OFFLOAD_CFG = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 73), -}; - -/* CMD_ENABLE2 flags */ -#define CMD_ENABLE2_STANDBY 0x0 -#define CMD_ENABLE2_ACTIVE 0x1 - -/* flags for CMD_OPEN */ -#define CMD_OPENF_OPROM 0x1 /* open coming from option rom */ - -/* flags for CMD_INIT */ -#define CMD_INITF_DEFAULT_MAC 0x1 /* init with default mac addr */ - -/* flags for CMD_PACKET_FILTER */ -#define CMD_PFILTER_DIRECTED 0x01 -#define CMD_PFILTER_MULTICAST 0x02 -#define CMD_PFILTER_BROADCAST 0x04 -#define CMD_PFILTER_PROMISCUOUS 0x08 -#define CMD_PFILTER_ALL_MULTICAST 0x10 - -/* Commands for CMD_QP_ENABLE/CM_QP_DISABLE */ -#define CMD_QP_RQWQ 0x0 - -/* rewrite modes for CMD_IG_VLAN_REWRITE_MODE */ -#define IG_VLAN_REWRITE_MODE_DEFAULT_TRUNK 0 -#define IG_VLAN_REWRITE_MODE_UNTAG_DEFAULT_VLAN 1 -#define IG_VLAN_REWRITE_MODE_PRIORITY_TAG_DEFAULT_VLAN 2 -#define IG_VLAN_REWRITE_MODE_PASS_THRU 3 - -enum vnic_devcmd_status { - STAT_NONE = 0, - STAT_BUSY = 1 << 0, /* cmd in progress */ - STAT_ERROR = 1 << 1, /* last cmd caused error (code in a0) */ -}; - -enum vnic_devcmd_error { - ERR_SUCCESS = 0, - ERR_EINVAL = 1, - ERR_EFAULT = 2, - ERR_EPERM = 3, - ERR_EBUSY = 4, - ERR_ECMDUNKNOWN = 5, - ERR_EBADSTATE = 6, - ERR_ENOMEM = 7, - ERR_ETIMEDOUT = 8, - ERR_ELINKDOWN = 9, - ERR_EMAXRES = 10, - ERR_ENOTSUPPORTED = 11, - ERR_EINPROGRESS = 12, - ERR_MAX -}; - -/* - * note: hw_version and asic_rev refer to the same thing, - * but have different formats. hw_version is - * a 32-byte string (e.g. "A2") and asic_rev is - * a 16-bit integer (e.g. 0xA2). - */ -struct vnic_devcmd_fw_info { - char fw_version[32]; - char fw_build[32]; - char hw_version[32]; - char hw_serial_number[32]; - u16 asic_type; - u16 asic_rev; -}; - -enum fwinfo_asic_type { - FWINFO_ASIC_TYPE_UNKNOWN, - FWINFO_ASIC_TYPE_PALO, - FWINFO_ASIC_TYPE_SERENO, -}; - - -struct vnic_devcmd_notify { - u32 csum; /* checksum over following words */ - - u32 link_state; /* link up == 1 */ - u32 port_speed; /* effective port speed (rate limit) */ - u32 mtu; /* MTU */ - u32 msglvl; /* requested driver msg lvl */ - u32 uif; /* uplink interface */ - u32 status; /* status bits (see VNIC_STF_*) */ - u32 error; /* error code (see ERR_*) for first ERR */ - u32 link_down_cnt; /* running count of link down transitions */ - u32 perbi_rebuild_cnt; /* running count of perbi rebuilds */ -}; -#define VNIC_STF_FATAL_ERR 0x0001 /* fatal fw error */ -#define VNIC_STF_STD_PAUSE 0x0002 /* standard link-level pause on */ -#define VNIC_STF_PFC_PAUSE 0x0004 /* priority flow control pause on */ -/* all supported status flags */ -#define VNIC_STF_ALL (VNIC_STF_FATAL_ERR |\ - VNIC_STF_STD_PAUSE |\ - VNIC_STF_PFC_PAUSE |\ - 0) - -struct vnic_devcmd_provinfo { - u8 oui[3]; - u8 type; - u8 data[0]; -}; - -/* - * These are used in flags field of different filters to denote - * valid fields used. - */ -#define FILTER_FIELD_VALID(fld) (1 << (fld - 1)) - -#define FILTER_FIELDS_USNIC (FILTER_FIELD_VALID(1) | \ - FILTER_FIELD_VALID(2) | \ - FILTER_FIELD_VALID(3) | \ - FILTER_FIELD_VALID(4)) - -#define FILTER_FIELDS_IPV4_5TUPLE (FILTER_FIELD_VALID(1) | \ - FILTER_FIELD_VALID(2) | \ - FILTER_FIELD_VALID(3) | \ - FILTER_FIELD_VALID(4) | \ - FILTER_FIELD_VALID(5)) - -#define FILTER_FIELDS_MAC_VLAN (FILTER_FIELD_VALID(1) | \ - FILTER_FIELD_VALID(2)) - -#define FILTER_FIELD_USNIC_VLAN FILTER_FIELD_VALID(1) -#define FILTER_FIELD_USNIC_ETHTYPE FILTER_FIELD_VALID(2) -#define FILTER_FIELD_USNIC_PROTO FILTER_FIELD_VALID(3) -#define FILTER_FIELD_USNIC_ID FILTER_FIELD_VALID(4) - -struct filter_usnic_id { - u32 flags; - u16 vlan; - u16 ethtype; - u8 proto_version; - u32 usnic_id; -} __attribute__((packed)); - -#define FILTER_FIELD_5TUP_PROTO FILTER_FIELD_VALID(1) -#define FILTER_FIELD_5TUP_SRC_AD FILTER_FIELD_VALID(2) -#define FILTER_FIELD_5TUP_DST_AD FILTER_FIELD_VALID(3) -#define FILTER_FIELD_5TUP_SRC_PT FILTER_FIELD_VALID(4) -#define FILTER_FIELD_5TUP_DST_PT FILTER_FIELD_VALID(5) - -/* Enums for the protocol field. */ -enum protocol_e { - PROTO_UDP = 0, - PROTO_TCP = 1, -}; - -struct filter_ipv4_5tuple { - u32 flags; - u32 protocol; - u32 src_addr; - u32 dst_addr; - u16 src_port; - u16 dst_port; -} __attribute__((packed)); - -#define FILTER_FIELD_VMQ_VLAN FILTER_FIELD_VALID(1) -#define FILTER_FIELD_VMQ_MAC FILTER_FIELD_VALID(2) - -struct filter_mac_vlan { - u32 flags; - u16 vlan; - u8 mac_addr[6]; -} __attribute__((packed)); - -/* Specifies the filter_action type. */ -enum { - FILTER_ACTION_RQ_STEERING = 0, - FILTER_ACTION_MAX -}; - -struct filter_action { - u32 type; - union { - u32 rq_idx; - } u; -} __attribute__((packed)); - -/* Specifies the filter type. */ -enum filter_type { - FILTER_USNIC_ID = 0, - FILTER_IPV4_5TUPLE = 1, - FILTER_MAC_VLAN = 2, - FILTER_MAX -}; - -struct filter { - u32 type; - union { - struct filter_usnic_id usnic; - struct filter_ipv4_5tuple ipv4; - struct filter_mac_vlan mac_vlan; - } u; -} __attribute__((packed)); - -enum { - CLSF_TLV_FILTER = 0, - CLSF_TLV_ACTION = 1, -}; - -#define FILTER_MAX_BUF_SIZE 100 /* Maximum size of buffer to CMD_ADD_FILTER */ - -struct filter_tlv { - uint32_t type; - uint32_t length; - uint32_t val[0]; -}; - -enum { - CLSF_ADD = 0, - CLSF_DEL = 1, -}; - -/* - * Writing cmd register causes STAT_BUSY to get set in status register. - * When cmd completes, STAT_BUSY will be cleared. - * - * If cmd completed successfully STAT_ERROR will be clear - * and args registers contain cmd-specific results. - * - * If cmd error, STAT_ERROR will be set and args[0] contains error code. - * - * status register is read-only. While STAT_BUSY is set, - * all other register contents are read-only. - */ - -/* Make sizeof(vnic_devcmd) a power-of-2 for I/O BAR. */ -#define VNIC_DEVCMD_NARGS 15 -struct vnic_devcmd { - u32 status; /* RO */ - u32 cmd; /* RW */ - u64 args[VNIC_DEVCMD_NARGS]; /* RW cmd args (little-endian) */ -}; - -/* - * Version 2 of the interface. - * - * Some things are carried over, notably the vnic_devcmd_cmd enum. - */ - -/* - * Flags for vnic_devcmd2.flags - */ - -#define DEVCMD2_FNORESULT 0x1 /* Don't copy result to host */ - -#define VNIC_DEVCMD2_NARGS VNIC_DEVCMD_NARGS -struct vnic_devcmd2 { - u16 pad; - u16 flags; - u32 cmd; /* same command #defines as original */ - u64 args[VNIC_DEVCMD2_NARGS]; -}; - -#define VNIC_DEVCMD2_NRESULTS VNIC_DEVCMD_NARGS -struct devcmd2_result { - u64 results[VNIC_DEVCMD2_NRESULTS]; - u32 pad; - u16 completed_index; /* into copy WQ */ - u8 error; /* same error codes as original */ - u8 color; /* 0 or 1 as with completion queues */ -}; - -#define DEVCMD2_RING_SIZE 32 -#define DEVCMD2_DESC_SIZE 128 - -#define DEVCMD2_RESULTS_SIZE_MAX ((1 << 16) - 1) - -/* Overlay related definitions */ - -/* - * This enum lists the flag associated with each of the overlay features - */ -typedef enum { - OVERLAY_FEATURE_NVGRE = 1, - OVERLAY_FEATURE_VXLAN, - OVERLAY_FEATURE_MAX, -} overlay_feature_t; - -#define OVERLAY_OFFLOAD_ENABLE 0 -#define OVERLAY_OFFLOAD_DISABLE 1 - -#define OVERLAY_CFG_VXLAN_PORT_UPDATE 0 -#endif /* _VNIC_DEVCMD_H_ */ |