diff options
Diffstat (limited to 'src/dpdk22/drivers/net/fm10k/base/fm10k_mbx.c')
| -rw-r--r-- | src/dpdk22/drivers/net/fm10k/base/fm10k_mbx.c | 2239 |
1 files changed, 2239 insertions, 0 deletions
diff --git a/src/dpdk22/drivers/net/fm10k/base/fm10k_mbx.c b/src/dpdk22/drivers/net/fm10k/base/fm10k_mbx.c new file mode 100644 index 00000000..3c9ab3a5 --- /dev/null +++ b/src/dpdk22/drivers/net/fm10k/base/fm10k_mbx.c @@ -0,0 +1,2239 @@ +/******************************************************************************* + +Copyright (c) 2013 - 2015, Intel Corporation +All rights reserved. + +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + 3. Neither the name of the Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived from + this software without specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE +LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +POSSIBILITY OF SUCH DAMAGE. + +***************************************************************************/ + +#include "fm10k_common.h" + +/** + * fm10k_fifo_init - Initialize a message FIFO + * @fifo: pointer to FIFO + * @buffer: pointer to memory to be used to store FIFO + * @size: maximum message size to store in FIFO, must be 2^n - 1 + **/ +STATIC void fm10k_fifo_init(struct fm10k_mbx_fifo *fifo, u32 *buffer, u16 size) +{ + fifo->buffer = buffer; + fifo->size = size; + fifo->head = 0; + fifo->tail = 0; +} + +/** + * fm10k_fifo_used - Retrieve used space in FIFO + * @fifo: pointer to FIFO + * + * This function returns the number of DWORDs used in the FIFO + **/ +STATIC u16 fm10k_fifo_used(struct fm10k_mbx_fifo *fifo) +{ + return fifo->tail - fifo->head; +} + +/** + * fm10k_fifo_unused - Retrieve unused space in FIFO + * @fifo: pointer to FIFO + * + * This function returns the number of unused DWORDs in the FIFO + **/ +STATIC u16 fm10k_fifo_unused(struct fm10k_mbx_fifo *fifo) +{ + return fifo->size + fifo->head - fifo->tail; +} + +/** + * fm10k_fifo_empty - Test to verify if fifo is empty + * @fifo: pointer to FIFO + * + * This function returns true if the FIFO is empty, else false + **/ +STATIC bool fm10k_fifo_empty(struct fm10k_mbx_fifo *fifo) +{ + return fifo->head == fifo->tail; +} + +/** + * fm10k_fifo_head_offset - returns indices of head with given offset + * @fifo: pointer to FIFO + * @offset: offset to add to head + * + * This function returns the indices into the fifo based on head + offset + **/ +STATIC u16 fm10k_fifo_head_offset(struct fm10k_mbx_fifo *fifo, u16 offset) +{ + return (fifo->head + offset) & (fifo->size - 1); +} + +/** + * fm10k_fifo_tail_offset - returns indices of tail with given offset + * @fifo: pointer to FIFO + * @offset: offset to add to tail + * + * This function returns the indices into the fifo based on tail + offset + **/ +STATIC u16 fm10k_fifo_tail_offset(struct fm10k_mbx_fifo *fifo, u16 offset) +{ + return (fifo->tail + offset) & (fifo->size - 1); +} + +/** + * fm10k_fifo_head_len - Retrieve length of first message in FIFO + * @fifo: pointer to FIFO + * + * This function returns the size of the first message in the FIFO + **/ +STATIC u16 fm10k_fifo_head_len(struct fm10k_mbx_fifo *fifo) +{ + u32 *head = fifo->buffer + fm10k_fifo_head_offset(fifo, 0); + + /* verify there is at least 1 DWORD in the fifo so *head is valid */ + if (fm10k_fifo_empty(fifo)) + return 0; + + /* retieve the message length */ + return FM10K_TLV_DWORD_LEN(*head); +} + +/** + * fm10k_fifo_head_drop - Drop the first message in FIFO + * @fifo: pointer to FIFO + * + * This function returns the size of the message dropped from the FIFO + **/ +STATIC u16 fm10k_fifo_head_drop(struct fm10k_mbx_fifo *fifo) +{ + u16 len = fm10k_fifo_head_len(fifo); + + /* update head so it is at the start of next frame */ + fifo->head += len; + + return len; +} + +/** + * fm10k_fifo_drop_all - Drop all messages in FIFO + * @fifo: pointer to FIFO + * + * This function resets the head pointer to drop all messages in the FIFO and + * ensure the FIFO is empty. + **/ +STATIC void fm10k_fifo_drop_all(struct fm10k_mbx_fifo *fifo) +{ + fifo->head = fifo->tail; +} + +/** + * fm10k_mbx_index_len - Convert a head/tail index into a length value + * @mbx: pointer to mailbox + * @head: head index + * @tail: head index + * + * This function takes the head and tail index and determines the length + * of the data indicated by this pair. + **/ +STATIC u16 fm10k_mbx_index_len(struct fm10k_mbx_info *mbx, u16 head, u16 tail) +{ + u16 len = tail - head; + + /* we wrapped so subtract 2, one for index 0, one for all 1s index */ + if (len > tail) + len -= 2; + + return len & ((mbx->mbmem_len << 1) - 1); +} + +/** + * fm10k_mbx_tail_add - Determine new tail value with added offset + * @mbx: pointer to mailbox + * @offset: length to add to head offset + * + * This function takes the local tail index and recomputes it for + * a given length added as an offset. + **/ +STATIC u16 fm10k_mbx_tail_add(struct fm10k_mbx_info *mbx, u16 offset) +{ + u16 tail = (mbx->tail + offset + 1) & ((mbx->mbmem_len << 1) - 1); + + /* add/sub 1 because we cannot have offset 0 or all 1s */ + return (tail > mbx->tail) ? --tail : ++tail; +} + +/** + * fm10k_mbx_tail_sub - Determine new tail value with subtracted offset + * @mbx: pointer to mailbox + * @offset: length to add to head offset + * + * This function takes the local tail index and recomputes it for + * a given length added as an offset. + **/ +STATIC u16 fm10k_mbx_tail_sub(struct fm10k_mbx_info *mbx, u16 offset) +{ + u16 tail = (mbx->tail - offset - 1) & ((mbx->mbmem_len << 1) - 1); + + /* sub/add 1 because we cannot have offset 0 or all 1s */ + return (tail < mbx->tail) ? ++tail : --tail; +} + +/** + * fm10k_mbx_head_add - Determine new head value with added offset + * @mbx: pointer to mailbox + * @offset: length to add to head offset + * + * This function takes the local head index and recomputes it for + * a given length added as an offset. + **/ +STATIC u16 fm10k_mbx_head_add(struct fm10k_mbx_info *mbx, u16 offset) +{ + u16 head = (mbx->head + offset + 1) & ((mbx->mbmem_len << 1) - 1); + + /* add/sub 1 because we cannot have offset 0 or all 1s */ + return (head > mbx->head) ? --head : ++head; +} + +/** + * fm10k_mbx_head_sub - Determine new head value with subtracted offset + * @mbx: pointer to mailbox + * @offset: length to add to head offset + * + * This function takes the local head index and recomputes it for + * a given length added as an offset. + **/ +STATIC u16 fm10k_mbx_head_sub(struct fm10k_mbx_info *mbx, u16 offset) +{ + u16 head = (mbx->head - offset - 1) & ((mbx->mbmem_len << 1) - 1); + + /* sub/add 1 because we cannot have offset 0 or all 1s */ + return (head < mbx->head) ? ++head : --head; +} + +/** + * fm10k_mbx_pushed_tail_len - Retrieve the length of message being pushed + * @mbx: pointer to mailbox + * + * This function will return the length of the message currently being + * pushed onto the tail of the Rx queue. + **/ +STATIC u16 fm10k_mbx_pushed_tail_len(struct fm10k_mbx_info *mbx) +{ + u32 *tail = mbx->rx.buffer + fm10k_fifo_tail_offset(&mbx->rx, 0); + + /* pushed tail is only valid if pushed is set */ + if (!mbx->pushed) + return 0; + + return FM10K_TLV_DWORD_LEN(*tail); +} + +/** + * fm10k_fifo_write_copy - pulls data off of msg and places it in fifo + * @fifo: pointer to FIFO + * @msg: message array to populate + * @tail_offset: additional offset to add to tail pointer + * @len: length of FIFO to copy into message header + * + * This function will take a message and copy it into a section of the + * FIFO. In order to get something into a location other than just + * the tail you can use tail_offset to adjust the pointer. + **/ +STATIC void fm10k_fifo_write_copy(struct fm10k_mbx_fifo *fifo, + const u32 *msg, u16 tail_offset, u16 len) +{ + u16 end = fm10k_fifo_tail_offset(fifo, tail_offset); + u32 *tail = fifo->buffer + end; + + /* track when we should cross the end of the FIFO */ + end = fifo->size - end; + + /* copy end of message before start of message */ + if (end < len) + memcpy(fifo->buffer, msg + end, (len - end) << 2); + else + end = len; + + /* Copy remaining message into Tx FIFO */ + memcpy(tail, msg, end << 2); +} + +/** + * fm10k_fifo_enqueue - Enqueues the message to the tail of the FIFO + * @fifo: pointer to FIFO + * @msg: message array to read + * + * This function enqueues a message up to the size specified by the length + * contained in the first DWORD of the message and will place at the tail + * of the FIFO. It will return 0 on success, or a negative value on error. + **/ +STATIC s32 fm10k_fifo_enqueue(struct fm10k_mbx_fifo *fifo, const u32 *msg) +{ + u16 len = FM10K_TLV_DWORD_LEN(*msg); + + DEBUGFUNC("fm10k_fifo_enqueue"); + + /* verify parameters */ + if (len > fifo->size) + return FM10K_MBX_ERR_SIZE; + + /* verify there is room for the message */ + if (len > fm10k_fifo_unused(fifo)) + return FM10K_MBX_ERR_NO_SPACE; + + /* Copy message into FIFO */ + fm10k_fifo_write_copy(fifo, msg, 0, len); + + /* memory barrier to guarantee FIFO is written before tail update */ + FM10K_WMB(); + + /* Update Tx FIFO tail */ + fifo->tail += len; + + return FM10K_SUCCESS; +} + +/** + * fm10k_mbx_validate_msg_size - Validate incoming message based on size + * @mbx: pointer to mailbox + * @len: length of data pushed onto buffer + * + * This function analyzes the frame and will return a non-zero value when + * the start of a message larger than the mailbox is detected. + **/ +STATIC u16 fm10k_mbx_validate_msg_size(struct fm10k_mbx_info *mbx, u16 len) +{ + struct fm10k_mbx_fifo *fifo = &mbx->rx; + u16 total_len = 0, msg_len; + u32 *msg; + + DEBUGFUNC("fm10k_mbx_validate_msg"); + + /* length should include previous amounts pushed */ + len += mbx->pushed; + + /* offset in message is based off of current message size */ + do { + msg = fifo->buffer + fm10k_fifo_tail_offset(fifo, total_len); + msg_len = FM10K_TLV_DWORD_LEN(*msg); + total_len += msg_len; + } while (total_len < len); + + /* message extends out of pushed section, but fits in FIFO */ + if ((len < total_len) && (msg_len <= mbx->max_size)) + return 0; + + /* return length of invalid section */ + return (len < total_len) ? len : (len - total_len); +} + +/** + * fm10k_mbx_write_copy - pulls data off of Tx FIFO and places it in mbmem + * @mbx: pointer to mailbox + * + * This function will take a section of the Tx FIFO and copy it into the + * mailbox memory. The offset in mbmem is based on the lower bits of the + * tail and len determines the length to copy. + **/ +STATIC void fm10k_mbx_write_copy(struct fm10k_hw *hw, + struct fm10k_mbx_info *mbx) +{ + struct fm10k_mbx_fifo *fifo = &mbx->tx; + u32 mbmem = mbx->mbmem_reg; + u32 *head = fifo->buffer; + u16 end, len, tail, mask; + + DEBUGFUNC("fm10k_mbx_write_copy"); + + if (!mbx->tail_len) + return; + + /* determine data length and mbmem tail index */ + mask = mbx->mbmem_len - 1; + len = mbx->tail_len; + tail = fm10k_mbx_tail_sub(mbx, len); + if (tail > mask) + tail++; + + /* determine offset in the ring */ + end = fm10k_fifo_head_offset(fifo, mbx->pulled); + head += end; + + /* memory barrier to guarantee data is ready to be read */ + FM10K_RMB(); + + /* Copy message from Tx FIFO */ + for (end = fifo->size - end; len; head = fifo->buffer) { + do { + /* adjust tail to match offset for FIFO */ + tail &= mask; + if (!tail) + tail++; + + mbx->tx_mbmem_pulled++; + + /* write message to hardware FIFO */ + FM10K_WRITE_MBX(hw, mbmem + tail++, *(head++)); + } while (--len && --end); + } +} + +/** + * fm10k_mbx_pull_head - Pulls data off of head of Tx FIFO + * @hw: pointer to hardware structure + * @mbx: pointer to mailbox + * @head: acknowledgement number last received + * + * This function will push the tail index forward based on the remote + * head index. It will then pull up to mbmem_len DWORDs off of the + * head of the FIFO and will place it in the MBMEM registers + * associated with the mailbox. + **/ +STATIC void fm10k_mbx_pull_head(struct fm10k_hw *hw, + struct fm10k_mbx_info *mbx, u16 head) +{ + u16 mbmem_len, len, ack = fm10k_mbx_index_len(mbx, head, mbx->tail); + struct fm10k_mbx_fifo *fifo = &mbx->tx; + + /* update number of bytes pulled and update bytes in transit */ + mbx->pulled += mbx->tail_len - ack; + + /* determine length of data to pull, reserve space for mbmem header */ + mbmem_len = mbx->mbmem_len - 1; + len = fm10k_fifo_used(fifo) - mbx->pulled; + if (len > mbmem_len) + len = mbmem_len; + + /* update tail and record number of bytes in transit */ + mbx->tail = fm10k_mbx_tail_add(mbx, len - ack); + mbx->tail_len = len; + + /* drop pulled messages from the FIFO */ + for (len = fm10k_fifo_head_len(fifo); + len && (mbx->pulled >= len); + len = fm10k_fifo_head_len(fifo)) { + mbx->pulled -= fm10k_fifo_head_drop(fifo); + mbx->tx_messages++; + mbx->tx_dwords += len; + } + + /* Copy message out from the Tx FIFO */ + fm10k_mbx_write_copy(hw, mbx); +} + +/** + * fm10k_mbx_read_copy - pulls data off of mbmem and places it in Rx FIFO + * @hw: pointer to hardware structure + * @mbx: pointer to mailbox + * + * This function will take a section of the mailbox memory and copy it + * into the Rx FIFO. The offset is based on the lower bits of the + * head and len determines the length to copy. + **/ +STATIC void fm10k_mbx_read_copy(struct fm10k_hw *hw, + struct fm10k_mbx_info *mbx) +{ + struct fm10k_mbx_fifo *fifo = &mbx->rx; + u32 mbmem = mbx->mbmem_reg ^ mbx->mbmem_len; + u32 *tail = fifo->buffer; + u16 end, len, head; + + DEBUGFUNC("fm10k_mbx_read_copy"); + + /* determine data length and mbmem head index */ + len = mbx->head_len; + head = fm10k_mbx_head_sub(mbx, len); + if (head >= mbx->mbmem_len) + head++; + + /* determine offset in the ring */ + end = fm10k_fifo_tail_offset(fifo, mbx->pushed); + tail += end; + + /* Copy message into Rx FIFO */ + for (end = fifo->size - end; len; tail = fifo->buffer) { + do { + /* adjust head to match offset for FIFO */ + head &= mbx->mbmem_len - 1; + if (!head) + head++; + + mbx->rx_mbmem_pushed++; + + /* read message from hardware FIFO */ + *(tail++) = FM10K_READ_MBX(hw, mbmem + head++); + } while (--len && --end); + } + + /* memory barrier to guarantee FIFO is written before tail update */ + FM10K_WMB(); +} + +/** + * fm10k_mbx_push_tail - Pushes up to 15 DWORDs on to tail of FIFO + * @hw: pointer to hardware structure + * @mbx: pointer to mailbox + * @tail: tail index of message + * + * This function will first validate the tail index and size for the + * incoming message. It then updates the acknowledgment number and + * copies the data into the FIFO. It will return the number of messages + * dequeued on success and a negative value on error. + **/ +STATIC s32 fm10k_mbx_push_tail(struct fm10k_hw *hw, + struct fm10k_mbx_info *mbx, + u16 tail) +{ + struct fm10k_mbx_fifo *fifo = &mbx->rx; + u16 len, seq = fm10k_mbx_index_len(mbx, mbx->head, tail); + + DEBUGFUNC("fm10k_mbx_push_tail"); + + /* determine length of data to push */ + len = fm10k_fifo_unused(fifo) - mbx->pushed; + if (len > seq) + len = seq; + + /* update head and record bytes received */ + mbx->head = fm10k_mbx_head_add(mbx, len); + mbx->head_len = len; + + /* nothing to do if there is no data */ + if (!len) + return FM10K_SUCCESS; + + /* Copy msg into Rx FIFO */ + fm10k_mbx_read_copy(hw, mbx); + + /* determine if there are any invalid lengths in message */ + if (fm10k_mbx_validate_msg_size(mbx, len)) + return FM10K_MBX_ERR_SIZE; + + /* Update pushed */ + mbx->pushed += len; + + /* flush any completed messages */ + for (len = fm10k_mbx_pushed_tail_len(mbx); + len && (mbx->pushed >= len); + len = fm10k_mbx_pushed_tail_len(mbx)) { + fifo->tail += len; + mbx->pushed -= len; + mbx->rx_messages++; + mbx->rx_dwords += len; + } + + return FM10K_SUCCESS; +} + +/* pre-generated data for generating the CRC based on the poly 0xAC9A. */ +static const u16 fm10k_crc_16b_table[256] = { + 0x0000, 0x7956, 0xF2AC, 0x8BFA, 0xBC6D, 0xC53B, 0x4EC1, 0x3797, + 0x21EF, 0x58B9, 0xD343, 0xAA15, 0x9D82, 0xE4D4, 0x6F2E, 0x1678, + 0x43DE, 0x3A88, 0xB172, 0xC824, 0xFFB3, 0x86E5, 0x0D1F, 0x7449, + 0x6231, 0x1B67, 0x909D, 0xE9CB, 0xDE5C, 0xA70A, 0x2CF0, 0x55A6, + 0x87BC, 0xFEEA, 0x7510, 0x0C46, 0x3BD1, 0x4287, 0xC97D, 0xB02B, + 0xA653, 0xDF05, 0x54FF, 0x2DA9, 0x1A3E, 0x6368, 0xE892, 0x91C4, + 0xC462, 0xBD34, 0x36CE, 0x4F98, 0x780F, 0x0159, 0x8AA3, 0xF3F5, + 0xE58D, 0x9CDB, 0x1721, 0x6E77, 0x59E0, 0x20B6, 0xAB4C, 0xD21A, + 0x564D, 0x2F1B, 0xA4E1, 0xDDB7, 0xEA20, 0x9376, 0x188C, 0x61DA, + 0x77A2, 0x0EF4, 0x850E, 0xFC58, 0xCBCF, 0xB299, 0x3963, 0x4035, + 0x1593, 0x6CC5, 0xE73F, 0x9E69, 0xA9FE, 0xD0A8, 0x5B52, 0x2204, + 0x347C, 0x4D2A, 0xC6D0, 0xBF86, 0x8811, 0xF147, 0x7ABD, 0x03EB, + 0xD1F1, 0xA8A7, 0x235D, 0x5A0B, 0x6D9C, 0x14CA, 0x9F30, 0xE666, + 0xF01E, 0x8948, 0x02B2, 0x7BE4, 0x4C73, 0x3525, 0xBEDF, 0xC789, + 0x922F, 0xEB79, 0x6083, 0x19D5, 0x2E42, 0x5714, 0xDCEE, 0xA5B8, + 0xB3C0, 0xCA96, 0x416C, 0x383A, 0x0FAD, 0x76FB, 0xFD01, 0x8457, + 0xAC9A, 0xD5CC, 0x5E36, 0x2760, 0x10F7, 0x69A1, 0xE25B, 0x9B0D, + 0x8D75, 0xF423, 0x7FD9, 0x068F, 0x3118, 0x484E, 0xC3B4, 0xBAE2, + 0xEF44, 0x9612, 0x1DE8, 0x64BE, 0x5329, 0x2A7F, 0xA185, 0xD8D3, + 0xCEAB, 0xB7FD, 0x3C07, 0x4551, 0x72C6, 0x0B90, 0x806A, 0xF93C, + 0x2B26, 0x5270, 0xD98A, 0xA0DC, 0x974B, 0xEE1D, 0x65E7, 0x1CB1, + 0x0AC9, 0x739F, 0xF865, 0x8133, 0xB6A4, 0xCFF2, 0x4408, 0x3D5E, + 0x68F8, 0x11AE, 0x9A54, 0xE302, 0xD495, 0xADC3, 0x2639, 0x5F6F, + 0x4917, 0x3041, 0xBBBB, 0xC2ED, 0xF57A, 0x8C2C, 0x07D6, 0x7E80, + 0xFAD7, 0x8381, 0x087B, 0x712D, 0x46BA, 0x3FEC, 0xB416, 0xCD40, + 0xDB38, 0xA26E, 0x2994, 0x50C2, 0x6755, 0x1E03, 0x95F9, 0xECAF, + 0xB909, 0xC05F, 0x4BA5, 0x32F3, 0x0564, 0x7C32, 0xF7C8, 0x8E9E, + 0x98E6, 0xE1B0, 0x6A4A, 0x131C, 0x248B, 0x5DDD, 0xD627, 0xAF71, + 0x7D6B, 0x043D, 0x8FC7, 0xF691, 0xC106, 0xB850, 0x33AA, 0x4AFC, + 0x5C84, 0x25D2, 0xAE28, 0xD77E, 0xE0E9, 0x99BF, 0x1245, 0x6B13, + 0x3EB5, 0x47E3, 0xCC19, 0xB54F, 0x82D8, 0xFB8E, 0x7074, 0x0922, + 0x1F5A, 0x660C, 0xEDF6, 0x94A0, 0xA337, 0xDA61, 0x519B, 0x28CD }; + +/** + * fm10k_crc_16b - Generate a 16 bit CRC for a region of 16 bit data + * @data: pointer to data to process + * @seed: seed value for CRC + * @len: length measured in 16 bits words + * + * This function will generate a CRC based on the polynomial 0xAC9A and + * whatever value is stored in the seed variable. Note that this + * value inverts the local seed and the result in order to capture all + * leading and trailing zeros. + */ +STATIC u16 fm10k_crc_16b(const u32 *data, u16 seed, u16 len) +{ + u32 result = seed; + + while (len--) { + result ^= *(data++); + result = (result >> 8) ^ fm10k_crc_16b_table[result & 0xFF]; + result = (result >> 8) ^ fm10k_crc_16b_table[result & 0xFF]; + + if (!(len--)) + break; + + result = (result >> 8) ^ fm10k_crc_16b_table[result & 0xFF]; + result = (result >> 8) ^ fm10k_crc_16b_table[result & 0xFF]; + } + + return (u16)result; +} + +/** + * fm10k_fifo_crc - generate a CRC based off of FIFO data + * @fifo: pointer to FIFO + * @offset: offset point for start of FIFO + * @len: number of DWORDS words to process + * @seed: seed value for CRC + * + * This function generates a CRC for some region of the FIFO + **/ +STATIC u16 fm10k_fifo_crc(struct fm10k_mbx_fifo *fifo, u16 offset, + u16 len, u16 seed) +{ + u32 *data = fifo->buffer + offset; + + /* track when we should cross the end of the FIFO */ + offset = fifo->size - offset; + + /* if we are in 2 blocks process the end of the FIFO first */ + if (offset < len) { + seed = fm10k_crc_16b(data, seed, offset * 2); + data = fifo->buffer; + len -= offset; + } + + /* process any remaining bits */ + return fm10k_crc_16b(data, seed, len * 2); +} + +/** + * fm10k_mbx_update_local_crc - Update the local CRC for outgoing data + * @mbx: pointer to mailbox + * @head: head index provided by remote mailbox + * + * This function will generate the CRC for all data from the end of the + * last head update to the current one. It uses the result of the + * previous CRC as the seed for this update. The result is stored in + * mbx->local. + **/ +STATIC void fm10k_mbx_update_local_crc(struct fm10k_mbx_info *mbx, u16 head) +{ + u16 len = mbx->tail_len - fm10k_mbx_index_len(mbx, head, mbx->tail); + + /* determine the offset for the start of the region to be pulled */ + head = fm10k_fifo_head_offset(&mbx->tx, mbx->pulled); + + /* update local CRC to include all of the pulled data */ + mbx->local = fm10k_fifo_crc(&mbx->tx, head, len, mbx->local); +} + +/** + * fm10k_mbx_verify_remote_crc - Verify the CRC is correct for current data + * @mbx: pointer to mailbox + * + * This function will take all data that has been provided from the remote + * end and generate a CRC for it. This is stored in mbx->remote. The + * CRC for the header is then computed and if the result is non-zero this + * is an error and we signal an error dropping all data and resetting the + * connection. + */ +STATIC s32 fm10k_mbx_verify_remote_crc(struct fm10k_mbx_info *mbx) +{ + struct fm10k_mbx_fifo *fifo = &mbx->rx; + u16 len = mbx->head_len; + u16 offset = fm10k_fifo_tail_offset(fifo, mbx->pushed) - len; + u16 crc; + + /* update the remote CRC if new data has been received */ + if (len) + mbx->remote = fm10k_fifo_crc(fifo, offset, len, mbx->remote); + + /* process the full header as we have to validate the CRC */ + crc = fm10k_crc_16b(&mbx->mbx_hdr, mbx->remote, 1); + + /* notify other end if we have a problem */ + return crc ? FM10K_MBX_ERR_CRC : FM10K_SUCCESS; +} + +/** + * fm10k_mbx_rx_ready - Indicates that a message is ready in the Rx FIFO + * @mbx: pointer to mailbox + * + * This function returns true if there is a message in the Rx FIFO to dequeue. + **/ +STATIC bool fm10k_mbx_rx_ready(struct fm10k_mbx_info *mbx) +{ + u16 msg_size = fm10k_fifo_head_len(&mbx->rx); + + return msg_size && (fm10k_fifo_used(&mbx->rx) >= msg_size); +} + +/** + * fm10k_mbx_tx_ready - Indicates that the mailbox is in state ready for Tx + * @mbx: pointer to mailbox + * @len: verify free space is >= this value + * + * This function returns true if the mailbox is in a state ready to transmit. + **/ +STATIC bool fm10k_mbx_tx_ready(struct fm10k_mbx_info *mbx, u16 len) +{ + u16 fifo_unused = fm10k_fifo_unused(&mbx->tx); + + return (mbx->state == FM10K_STATE_OPEN) && (fifo_unused >= len); +} + +/** + * fm10k_mbx_tx_complete - Indicates that the Tx FIFO has been emptied + * @mbx: pointer to mailbox + * + * This function returns true if the Tx FIFO is empty. + **/ +STATIC bool fm10k_mbx_tx_complete(struct fm10k_mbx_info *mbx) +{ + return fm10k_fifo_empty(&mbx->tx); +} + +/** + * fm10k_mbx_deqeueue_rx - Dequeues the message from the head in the Rx FIFO + * @hw: pointer to hardware structure + * @mbx: pointer to mailbox + * + * This function dequeues messages and hands them off to the tlv parser. + * It will return the number of messages processed when called. + **/ +STATIC u16 fm10k_mbx_dequeue_rx(struct fm10k_hw *hw, + struct fm10k_mbx_info *mbx) +{ + struct fm10k_mbx_fifo *fifo = &mbx->rx; + s32 err; + u16 cnt; + + /* parse Rx messages out of the Rx FIFO to empty it */ + for (cnt = 0; !fm10k_fifo_empty(fifo); cnt++) { + err = fm10k_tlv_msg_parse(hw, fifo->buffer + fifo->head, + mbx, mbx->msg_data); + if (err < 0) + mbx->rx_parse_err++; + + fm10k_fifo_head_drop(fifo); + } + + /* shift remaining bytes back to start of FIFO */ + memmove(fifo->buffer, fifo->buffer + fifo->tail, mbx->pushed << 2); + + /* shift head and tail based on the memory we moved */ + fifo->tail -= fifo->head; + fifo->head = 0; + + return cnt; +} + +/** + * fm10k_mbx_enqueue_tx - Enqueues the message to the tail of the Tx FIFO + * @hw: pointer to hardware structure + * @mbx: pointer to mailbox + * @msg: message array to read + * + * This function enqueues a message up to the size specified by the length + * contained in the first DWORD of the message and will place at the tail + * of the FIFO. It will return 0 on success, or a negative value on error. + **/ +STATIC s32 fm10k_mbx_enqueue_tx(struct fm10k_hw *hw, + struct fm10k_mbx_info *mbx, const u32 *msg) +{ + u32 countdown = mbx->timeout; + s32 err; + + switch (mbx->state) { + case FM10K_STATE_CLOSED: + case FM10K_STATE_DISCONNECT: + return FM10K_MBX_ERR_NO_MBX; + default: + break; + } + + /* enqueue the message on the Tx FIFO */ + err = fm10k_fifo_enqueue(&mbx->tx, msg); + + /* if it failed give the FIFO a chance to drain */ + while (err && countdown) { + countdown--; + usec_delay(mbx->usec_delay); + mbx->ops.process(hw, mbx); + err = fm10k_fifo_enqueue(&mbx->tx, msg); + } + + /* if we failed treat the error */ + if (err) { + mbx->timeout = 0; + mbx->tx_busy++; + } + + /* begin processing message, ignore errors as this is just meant + * to start the mailbox flow so we are not concerned if there + * is a bad error, or the mailbox is already busy with a request + */ + if (!mbx->tail_len) + mbx->ops.process(hw, mbx); + + return FM10K_SUCCESS; +} + +/** + * fm10k_mbx_read - Copies the mbmem to local message buffer + * @hw: pointer to hardware structure + * @mbx: pointer to mailbox + * + * This function copies the message from the mbmem to the message array + **/ +STATIC s32 fm10k_mbx_read(struct fm10k_hw *hw, struct fm10k_mbx_info *mbx) +{ + DEBUGFUNC("fm10k_mbx_read"); + + /* only allow one reader in here at a time */ + if (mbx->mbx_hdr) + return FM10K_MBX_ERR_BUSY; + + /* read to capture initial interrupt bits */ + if (FM10K_READ_MBX(hw, mbx->mbx_reg) & FM10K_MBX_REQ_INTERRUPT) + mbx->mbx_lock = FM10K_MBX_ACK; + + /* write back interrupt bits to clear */ + FM10K_WRITE_MBX(hw, mbx->mbx_reg, + FM10K_MBX_REQ_INTERRUPT | FM10K_MBX_ACK_INTERRUPT); + + /* read remote header */ + mbx->mbx_hdr = FM10K_READ_MBX(hw, mbx->mbmem_reg ^ mbx->mbmem_len); + + return FM10K_SUCCESS; +} + +/** + * fm10k_mbx_write - Copies the local message buffer to mbmem + * @hw: pointer to hardware structure + * @mbx: pointer to mailbox + * + * This function copies the message from the the message array to mbmem + **/ +STATIC void fm10k_mbx_write(struct fm10k_hw *hw, struct fm10k_mbx_info *mbx) +{ + u32 mbmem = mbx->mbmem_reg; + + DEBUGFUNC("fm10k_mbx_write"); + + /* write new msg header to notify recipient of change */ + FM10K_WRITE_MBX(hw, mbmem, mbx->mbx_hdr); + + /* write mailbox to send interrupt */ + if (mbx->mbx_lock) + FM10K_WRITE_MBX(hw, mbx->mbx_reg, mbx->mbx_lock); + + /* we no longer are using the header so free it */ + mbx->mbx_hdr = 0; + mbx->mbx_lock = 0; +} + +/** + * fm10k_mbx_create_connect_hdr - Generate a connect mailbox header + * @mbx: pointer to mailbox + * + * This function returns a connection mailbox header + **/ +STATIC void fm10k_mbx_create_connect_hdr(struct fm10k_mbx_info *mbx) +{ + mbx->mbx_lock |= FM10K_MBX_REQ; + + mbx->mbx_hdr = FM10K_MSG_HDR_FIELD_SET(FM10K_MSG_CONNECT, TYPE) | + FM10K_MSG_HDR_FIELD_SET(mbx->head, HEAD) | + FM10K_MSG_HDR_FIELD_SET(mbx->rx.size - 1, CONNECT_SIZE); +} + +/** + * fm10k_mbx_create_data_hdr - Generate a data mailbox header + * @mbx: pointer to mailbox + * + * This function returns a data mailbox header + **/ +STATIC void fm10k_mbx_create_data_hdr(struct fm10k_mbx_info *mbx) +{ + u32 hdr = FM10K_MSG_HDR_FIELD_SET(FM10K_MSG_DATA, TYPE) | + FM10K_MSG_HDR_FIELD_SET(mbx->tail, TAIL) | + FM10K_MSG_HDR_FIELD_SET(mbx->head, HEAD); + struct fm10k_mbx_fifo *fifo = &mbx->tx; + u16 crc; + + if (mbx->tail_len) + mbx->mbx_lock |= FM10K_MBX_REQ; + + /* generate CRC for data in flight and header */ + crc = fm10k_fifo_crc(fifo, fm10k_fifo_head_offset(fifo, mbx->pulled), + mbx->tail_len, mbx->local); + crc = fm10k_crc_16b(&hdr, crc, 1); + + /* load header to memory to be written */ + mbx->mbx_hdr = hdr | FM10K_MSG_HDR_FIELD_SET(crc, CRC); +} + +/** + * fm10k_mbx_create_disconnect_hdr - Generate a disconnect mailbox header + * @mbx: pointer to mailbox + * + * This function returns a disconnect mailbox header + **/ +STATIC void fm10k_mbx_create_disconnect_hdr(struct fm10k_mbx_info *mbx) +{ + u32 hdr = FM10K_MSG_HDR_FIELD_SET(FM10K_MSG_DISCONNECT, TYPE) | + FM10K_MSG_HDR_FIELD_SET(mbx->tail, TAIL) | + FM10K_MSG_HDR_FIELD_SET(mbx->head, HEAD); + u16 crc = fm10k_crc_16b(&hdr, mbx->local, 1); + + mbx->mbx_lock |= FM10K_MBX_ACK; + + /* load header to memory to be written */ + mbx->mbx_hdr = hdr | FM10K_MSG_HDR_FIELD_SET(crc, CRC); +} + +/** + * fm10k_mbx_create_fake_disconnect_hdr - Generate a false disconnect mailbox header + * @mbx: pointer to mailbox + * + * This function creates a fake disconnect header for loading into remote + * mailbox header. The primary purpose is to prevent errors on immediate + * start up after mbx->connect. + **/ +STATIC void fm10k_mbx_create_fake_disconnect_hdr(struct fm10k_mbx_info *mbx) +{ + u32 hdr = FM10K_MSG_HDR_FIELD_SET(FM10K_MSG_DISCONNECT, TYPE) | + FM10K_MSG_HDR_FIELD_SET(mbx->head, TAIL) | + FM10K_MSG_HDR_FIELD_SET(mbx->tail, HEAD); + u16 crc = fm10k_crc_16b(&hdr, mbx->local, 1); + + mbx->mbx_lock |= FM10K_MBX_ACK; + + /* load header to memory to be written */ + mbx->mbx_hdr = hdr | FM10K_MSG_HDR_FIELD_SET(crc, CRC); +} + +/** + * fm10k_mbx_create_error_msg - Generate a error message + * @mbx: pointer to mailbox + * @err: local error encountered + * + * This function will interpret the error provided by err, and based on + * that it may shift the message by 1 DWORD and then place an error header + * at the start of the message. + **/ +STATIC void fm10k_mbx_create_error_msg(struct fm10k_mbx_info *mbx, s32 err) +{ + /* only generate an error message for these types */ + switch (err) { + case FM10K_MBX_ERR_TAIL: + case FM10K_MBX_ERR_HEAD: + case FM10K_MBX_ERR_TYPE: + case FM10K_MBX_ERR_SIZE: + case FM10K_MBX_ERR_RSVD0: + case FM10K_MBX_ERR_CRC: + break; + default: + return; + } + + mbx->mbx_lock |= FM10K_MBX_REQ; + + mbx->mbx_hdr = FM10K_MSG_HDR_FIELD_SET(FM10K_MSG_ERROR, TYPE) | + FM10K_MSG_HDR_FIELD_SET(err, ERR_NO) | + FM10K_MSG_HDR_FIELD_SET(mbx->head, HEAD); +} + +/** + * fm10k_mbx_validate_msg_hdr - Validate common fields in the message header + * @mbx: pointer to mailbox + * @msg: message array to read + * + * This function will parse up the fields in the mailbox header and return + * an error if the header contains any of a number of invalid configurations + * including unrecognized type, invalid route, or a malformed message. + **/ +STATIC s32 fm10k_mbx_validate_msg_hdr(struct fm10k_mbx_info *mbx) +{ + u16 type, rsvd0, head, tail, size; + const u32 *hdr = &mbx->mbx_hdr; + + DEBUGFUNC("fm10k_mbx_validate_msg_hdr"); + + type = FM10K_MSG_HDR_FIELD_GET(*hdr, TYPE); + rsvd0 = FM10K_MSG_HDR_FIELD_GET(*hdr, RSVD0); + tail = FM10K_MSG_HDR_FIELD_GET(*hdr, TAIL); + head = FM10K_MSG_HDR_FIELD_GET(*hdr, HEAD); + size = FM10K_MSG_HDR_FIELD_GET(*hdr, CONNECT_SIZE); + + if (rsvd0) + return FM10K_MBX_ERR_RSVD0; + + switch (type) { + case FM10K_MSG_DISCONNECT: + /* validate that all data has been received */ + if (tail != mbx->head) + return FM10K_MBX_ERR_TAIL; + + /* fall through */ + case FM10K_MSG_DATA: + /* validate that head is moving correctly */ + if (!head || (head == FM10K_MSG_HDR_MASK(HEAD))) + return FM10K_MBX_ERR_HEAD; + if (fm10k_mbx_index_len(mbx, head, mbx->tail) > mbx->tail_len) + return FM10K_MBX_ERR_HEAD; + + /* validate that tail is moving correctly */ + if (!tail || (tail == FM10K_MSG_HDR_MASK(TAIL))) + return FM10K_MBX_ERR_TAIL; + if (fm10k_mbx_index_len(mbx, mbx->head, tail) < mbx->mbmem_len) + break; + + return FM10K_MBX_ERR_TAIL; + case FM10K_MSG_CONNECT: + /* validate size is in range and is power of 2 mask */ + if ((size < FM10K_VFMBX_MSG_MTU) || (size & (size + 1))) + return FM10K_MBX_ERR_SIZE; + + /* fall through */ + case FM10K_MSG_ERROR: + if (!head || (head == FM10K_MSG_HDR_MASK(HEAD))) + return FM10K_MBX_ERR_HEAD; + /* neither create nor error include a tail offset */ + if (tail) + return FM10K_MBX_ERR_TAIL; + + break; + default: + return FM10K_MBX_ERR_TYPE; + } + + return FM10K_SUCCESS; +} + +/** + * fm10k_mbx_create_reply - Generate reply based on state and remote head + * @mbx: pointer to mailbox + * @head: acknowledgement number + * + * This function will generate an outgoing message based on the current + * mailbox state and the remote fifo head. It will return the length + * of the outgoing message excluding header on success, and a negative value + * on error. + **/ +STATIC s32 fm10k_mbx_create_reply(struct fm10k_hw *hw, + struct fm10k_mbx_info *mbx, u16 head) +{ + switch (mbx->state) { + case FM10K_STATE_OPEN: + case FM10K_STATE_DISCONNECT: + /* update our checksum for the outgoing data */ + fm10k_mbx_update_local_crc(mbx, head); + + /* as long as other end recognizes us keep sending data */ + fm10k_mbx_pull_head(hw, mbx, head); + + /* generate new header based on data */ + if (mbx->tail_len || (mbx->state == FM10K_STATE_OPEN)) + fm10k_mbx_create_data_hdr(mbx); + else + fm10k_mbx_create_disconnect_hdr(mbx); + break; + case FM10K_STATE_CONNECT: + /* send disconnect even if we aren't connected */ + fm10k_mbx_create_connect_hdr(mbx); + break; + case FM10K_STATE_CLOSED: + /* generate new header based on data */ + fm10k_mbx_create_disconnect_hdr(mbx); + default: + break; + } + + return FM10K_SUCCESS; +} + +/** + * fm10k_mbx_reset_work- Reset internal pointers for any pending work + * @mbx: pointer to mailbox + * + * This function will reset all internal pointers so any work in progress + * is dropped. This call should occur every time we transition from the + * open state to the connect state. + **/ +STATIC void fm10k_mbx_reset_work(struct fm10k_mbx_info *mbx) +{ + u16 len, head, ack; + + /* reset our outgoing max size back to Rx limits */ + mbx->max_size = mbx->rx.size - 1; + + /* update mbx->pulled to account for tail_len and ack */ + head = FM10K_MSG_HDR_FIELD_GET(mbx->mbx_hdr, HEAD); + ack = fm10k_mbx_index_len(mbx, head, mbx->tail); + mbx->pulled += mbx->tail_len - ack; + + /* now drop any messages which have started or finished transmitting */ + while (fm10k_fifo_head_len(&mbx->tx) && mbx->pulled) { + len = fm10k_fifo_head_drop(&mbx->tx); + mbx->tx_dropped++; + if (mbx->pulled >= len) + mbx->pulled -= len; + else + mbx->pulled = 0; + } + + /* just do a quick resysnc to start of message */ + mbx->pushed = 0; + mbx->pulled = 0; + mbx->tail_len = 0; + mbx->head_len = 0; + mbx->rx.tail = 0; + mbx->rx.head = 0; +} + +/** + * fm10k_mbx_update_max_size - Update the max_size and drop large messages + * @mbx: pointer to mailbox + * @size: new value for max_size + * + * This function updates the max_size value and drops any outgoing messages + * at the head of the Tx FIFO if they are larger than max_size. It does not + * drop all messages, as this is too difficult to parse and remove them from + * the FIFO. Instead, rely on the checking to ensure that messages larger + * than max_size aren't pushed into the memory buffer. + **/ +STATIC void fm10k_mbx_update_max_size(struct fm10k_mbx_info *mbx, u16 size) +{ + u16 len; + + DEBUGFUNC("fm10k_mbx_update_max_size_hdr"); + + mbx->max_size = size; + + /* flush any oversized messages from the queue */ + for (len = fm10k_fifo_head_len(&mbx->tx); + len > size; + len = fm10k_fifo_head_len(&mbx->tx)) { + fm10k_fifo_head_drop(&mbx->tx); + mbx->tx_dropped++; + } +} + +/** + * fm10k_mbx_connect_reset - Reset following request for reset + * @mbx: pointer to mailbox + * + * This function resets the mailbox to either a disconnected state + * or a connect state depending on the current mailbox state + **/ +STATIC void fm10k_mbx_connect_reset(struct fm10k_mbx_info *mbx) +{ + /* just do a quick resysnc to start of frame */ + fm10k_mbx_reset_work(mbx); + + /* reset CRC seeds */ + mbx->local = FM10K_MBX_CRC_SEED; + mbx->remote = FM10K_MBX_CRC_SEED; + + /* we cannot exit connect until the size is good */ + if (mbx->state == FM10K_STATE_OPEN) + mbx->state = FM10K_STATE_CONNECT; + else + mbx->state = FM10K_STATE_CLOSED; +} + +/** + * fm10k_mbx_process_connect - Process connect header + * @mbx: pointer to mailbox + * @msg: message array to process + * + * This function will read an incoming connect header and reply with the + * appropriate message. It will return a value indicating the number of + * data DWORDs on success, or will return a negative value on failure. + **/ +STATIC s32 fm10k_mbx_process_connect(struct fm10k_hw *hw, + struct fm10k_mbx_info *mbx) +{ + const enum fm10k_mbx_state state = mbx->state; + const u32 *hdr = &mbx->mbx_hdr; + u16 size, head; + + /* we will need to pull all of the fields for verification */ + size = FM10K_MSG_HDR_FIELD_GET(*hdr, CONNECT_SIZE); + head = FM10K_MSG_HDR_FIELD_GET(*hdr, HEAD); + + switch (state) { + case FM10K_STATE_DISCONNECT: + case FM10K_STATE_OPEN: + /* reset any in-progress work */ + fm10k_mbx_connect_reset(mbx); + break; + case FM10K_STATE_CONNECT: + /* we cannot exit connect until the size is good */ + if (size > mbx->rx.size) { + mbx->max_size = mbx->rx.size - 1; + } else { + /* record the remote system requesting connection */ + mbx->state = FM10K_STATE_OPEN; + + fm10k_mbx_update_max_size(mbx, size); + } + break; + default: + break; + } + + /* align our tail index to remote head index */ + mbx->tail = head; + + return fm10k_mbx_create_reply(hw, mbx, head); +} + +/** + * fm10k_mbx_process_data - Process data header + * @mbx: pointer to mailbox + * + * This function will read an incoming data header and reply with the + * appropriate message. It will return a value indicating the number of + * data DWORDs on success, or will return a negative value on failure. + **/ +STATIC s32 fm10k_mbx_process_data(struct fm10k_hw *hw, + struct fm10k_mbx_info *mbx) +{ + const u32 *hdr = &mbx->mbx_hdr; + u16 head, tail; + s32 err; + + DEBUGFUNC("fm10k_mbx_process_data"); + + /* we will need to pull all of the fields for verification */ + head = FM10K_MSG_HDR_FIELD_GET(*hdr, HEAD); + tail = FM10K_MSG_HDR_FIELD_GET(*hdr, TAIL); + + /* if we are in connect just update our data and go */ + if (mbx->state == FM10K_STATE_CONNECT) { + mbx->tail = head; + mbx->state = FM10K_STATE_OPEN; + } + + /* abort on message size errors */ + err = fm10k_mbx_push_tail(hw, mbx, tail); + if (err < 0) + return err; + + /* verify the checksum on the incoming data */ + err = fm10k_mbx_verify_remote_crc(mbx); + if (err) + return err; + + /* process messages if we have received any */ + fm10k_mbx_dequeue_rx(hw, mbx); + + return fm10k_mbx_create_reply(hw, mbx, head); +} + +/** + * fm10k_mbx_process_disconnect - Process disconnect header + * @mbx: pointer to mailbox + * + * This function will read an incoming disconnect header and reply with the + * appropriate message. It will return a value indicating the number of + * data DWORDs on success, or will return a negative value on failure. + **/ +STATIC s32 fm10k_mbx_process_disconnect(struct fm10k_hw *hw, + struct fm10k_mbx_info *mbx) +{ + const enum fm10k_mbx_state state = mbx->state; + const u32 *hdr = &mbx->mbx_hdr; + u16 head; + s32 err; + + /* we will need to pull the header field for verification */ + head = FM10K_MSG_HDR_FIELD_GET(*hdr, HEAD); + + /* We should not be receiving disconnect if Rx is incomplete */ + if (mbx->pushed) + return FM10K_MBX_ERR_TAIL; + + /* we have already verified mbx->head == tail so we know this is 0 */ + mbx->head_len = 0; + + /* verify the checksum on the incoming header is correct */ + err = fm10k_mbx_verify_remote_crc(mbx); + if (err) + return err; + + switch (state) { + case FM10K_STATE_DISCONNECT: + case FM10K_STATE_OPEN: + /* state doesn't change if we still have work to do */ + if (!fm10k_mbx_tx_complete(mbx)) + break; + + /* verify the head indicates we completed all transmits */ + if (head != mbx->tail) + return FM10K_MBX_ERR_HEAD; + + /* reset any in-progress work */ + fm10k_mbx_connect_reset(mbx); + break; + default: + break; + } + + return fm10k_mbx_create_reply(hw, mbx, head); +} + +/** + * fm10k_mbx_process_error - Process error header + * @mbx: pointer to mailbox + * + * This function will read an incoming error header and reply with the + * appropriate message. It will return a value indicating the number of + * data DWORDs on success, or will return a negative value on failure. + **/ +STATIC s32 fm10k_mbx_process_error(struct fm10k_hw *hw, + struct fm10k_mbx_info *mbx) +{ + const u32 *hdr = &mbx->mbx_hdr; + u16 head; + + /* we will need to pull all of the fields for verification */ + head = FM10K_MSG_HDR_FIELD_GET(*hdr, HEAD); + + switch (mbx->state) { + case FM10K_STATE_OPEN: + case FM10K_STATE_DISCONNECT: + /* flush any uncompleted work */ + fm10k_mbx_reset_work(mbx); + + /* reset CRC seeds */ + mbx->local = FM10K_MBX_CRC_SEED; + mbx->remote = FM10K_MBX_CRC_SEED; + + /* reset tail index and size to prepare for reconnect */ + mbx->tail = head; + + /* if open then reset max_size and go back to connect */ + if (mbx->state == FM10K_STATE_OPEN) { + mbx->state = FM10K_STATE_CONNECT; + break; + } + + /* send a connect message to get data flowing again */ + fm10k_mbx_create_connect_hdr(mbx); + return FM10K_SUCCESS; + default: + break; + } + + return fm10k_mbx_create_reply(hw, mbx, mbx->tail); +} + +/** + * fm10k_mbx_process - Process mailbox interrupt + * @hw: pointer to hardware structure + * @mbx: pointer to mailbox + * + * This function will process incoming mailbox events and generate mailbox + * replies. It will return a value indicating the number of DWORDs + * transmitted excluding header on success or a negative value on error. + **/ +STATIC s32 fm10k_mbx_process(struct fm10k_hw *hw, + struct fm10k_mbx_info *mbx) +{ + s32 err; + + DEBUGFUNC("fm10k_mbx_process"); + + /* we do not read mailbox if closed */ + if (mbx->state == FM10K_STATE_CLOSED) + return FM10K_SUCCESS; + + /* copy data from mailbox */ + err = fm10k_mbx_read(hw, mbx); + if (err) + return err; + + /* validate type, source, and destination */ + err = fm10k_mbx_validate_msg_hdr(mbx); + if (err < 0) + goto msg_err; + + switch (FM10K_MSG_HDR_FIELD_GET(mbx->mbx_hdr, TYPE)) { + case FM10K_MSG_CONNECT: + err = fm10k_mbx_process_connect(hw, mbx); + break; + case FM10K_MSG_DATA: + err = fm10k_mbx_process_data(hw, mbx); + break; + case FM10K_MSG_DISCONNECT: + err = fm10k_mbx_process_disconnect(hw, mbx); + break; + case FM10K_MSG_ERROR: + err = fm10k_mbx_process_error(hw, mbx); + break; + default: + err = FM10K_MBX_ERR_TYPE; + break; + } + +msg_err: + /* notify partner of errors on our end */ + if (err < 0) + fm10k_mbx_create_error_msg(mbx, err); + + /* copy data from mailbox */ + fm10k_mbx_write(hw, mbx); + + return err; +} + +/** + * fm10k_mbx_disconnect - Shutdown mailbox connection + * @hw: pointer to hardware structure + * @mbx: pointer to mailbox + * + * This function will shut down the mailbox. It places the mailbox first + * in the disconnect state, it then allows up to a predefined timeout for + * the mailbox to transition to close on its own. If this does not occur + * then the mailbox will be forced into the closed state. + * + * Any mailbox transactions not completed before calling this function + * are not guaranteed to complete and may be dropped. + **/ +STATIC void fm10k_mbx_disconnect(struct fm10k_hw *hw, + struct fm10k_mbx_info *mbx) +{ + int timeout = mbx->timeout ? FM10K_MBX_DISCONNECT_TIMEOUT : 0; + + DEBUGFUNC("fm10k_mbx_disconnect"); + + /* Place mbx in ready to disconnect state */ + mbx->state = FM10K_STATE_DISCONNECT; + + /* trigger interrupt to start shutdown process */ + FM10K_WRITE_MBX(hw, mbx->mbx_reg, FM10K_MBX_REQ | + FM10K_MBX_INTERRUPT_DISABLE); + do { + usec_delay(FM10K_MBX_POLL_DELAY); + mbx->ops.process(hw, mbx); + timeout -= FM10K_MBX_POLL_DELAY; + } while ((timeout > 0) && (mbx->state != FM10K_STATE_CLOSED)); + + /* in case we didn't close, just force the mailbox into shutdown and + * drop all left over messages in the FIFO. + */ + fm10k_mbx_connect_reset(mbx); + fm10k_fifo_drop_all(&mbx->tx); + + FM10K_WRITE_MBX(hw, mbx->mbmem_reg, 0); +} + +/** + * fm10k_mbx_connect - Start mailbox connection + * @hw: pointer to hardware structure + * @mbx: pointer to mailbox + * + * This function will initiate a mailbox connection. It will populate the + * mailbox with a broadcast connect message and then initialize the lock. + * This is safe since the connect message is a single DWORD so the mailbox + * transaction is guaranteed to be atomic. + * + * This function will return an error if the mailbox has not been initiated + * or is currently in use. + **/ +STATIC s32 fm10k_mbx_connect(struct fm10k_hw *hw, struct fm10k_mbx_info *mbx) +{ + DEBUGFUNC("fm10k_mbx_connect"); + + /* we cannot connect an uninitialized mailbox */ + if (!mbx->rx.buffer) + return FM10K_MBX_ERR_NO_SPACE; + + /* we cannot connect an already connected mailbox */ + if (mbx->state != FM10K_STATE_CLOSED) + return FM10K_MBX_ERR_BUSY; + + /* mailbox timeout can now become active */ + mbx->timeout = FM10K_MBX_INIT_TIMEOUT; + + /* Place mbx in ready to connect state */ + mbx->state = FM10K_STATE_CONNECT; + + fm10k_mbx_reset_work(mbx); + + fm10k_mbx_create_fake_disconnect_hdr(mbx); + FM10K_WRITE_MBX(hw, mbx->mbmem_reg ^ mbx->mbmem_len, mbx->mbx_hdr); + + /* enable interrupt and notify other party of new message */ + mbx->mbx_lock = FM10K_MBX_REQ_INTERRUPT | FM10K_MBX_ACK_INTERRUPT | + FM10K_MBX_INTERRUPT_ENABLE; + + /* generate and load connect header into mailbox */ + fm10k_mbx_create_connect_hdr(mbx); + fm10k_mbx_write(hw, mbx); + + return FM10K_SUCCESS; +} + +/** + * fm10k_mbx_validate_handlers - Validate layout of message parsing data + * @msg_data: handlers for mailbox events + * + * This function validates the layout of the message parsing data. This + * should be mostly static, but it is important to catch any errors that + * are made when constructing the parsers. + **/ +STATIC s32 fm10k_mbx_validate_handlers(const struct fm10k_msg_data *msg_data) +{ + const struct fm10k_tlv_attr *attr; + unsigned int id; + + DEBUGFUNC("fm10k_mbx_validate_handlers"); + + /* Allow NULL mailboxes that transmit but don't receive */ + if (!msg_data) + return FM10K_SUCCESS; + + while (msg_data->id != FM10K_TLV_ERROR) { + /* all messages should have a function handler */ + if (!msg_data->func) + return FM10K_ERR_PARAM; + + /* parser is optional */ + attr = msg_data->attr; + if (attr) { + while (attr->id != FM10K_TLV_ERROR) { + id = attr->id; + attr++; + /* ID should always be increasing */ + if (id >= attr->id) + return FM10K_ERR_PARAM; + /* ID should fit in results array */ + if (id >= FM10K_TLV_RESULTS_MAX) + return FM10K_ERR_PARAM; + } + + /* verify terminator is in the list */ + if (attr->id != FM10K_TLV_ERROR) + return FM10K_ERR_PARAM; + } + + id = msg_data->id; + msg_data++; + /* ID should always be increasing */ + if (id >= msg_data->id) + return FM10K_ERR_PARAM; + } + + /* verify terminator is in the list */ + if ((msg_data->id != FM10K_TLV_ERROR) || !msg_data->func) + return FM10K_ERR_PARAM; + + return FM10K_SUCCESS; +} + +/** + * fm10k_mbx_register_handlers - Register a set of handler ops for mailbox + * @mbx: pointer to mailbox + * @msg_data: handlers for mailbox events + * + * This function associates a set of message handling ops with a mailbox. + **/ +STATIC s32 fm10k_mbx_register_handlers(struct fm10k_mbx_info *mbx, + const struct fm10k_msg_data *msg_data) +{ + DEBUGFUNC("fm10k_mbx_register_handlers"); + + /* validate layout of handlers before assigning them */ + if (fm10k_mbx_validate_handlers(msg_data)) + return FM10K_ERR_PARAM; + + /* initialize the message handlers */ + mbx->msg_data = msg_data; + + return FM10K_SUCCESS; +} + +/** + * fm10k_pfvf_mbx_init - Initialize mailbox memory for PF/VF mailbox + * @hw: pointer to hardware structure + * @mbx: pointer to mailbox + * @msg_data: handlers for mailbox events + * @id: ID reference for PF as it supports up to 64 PF/VF mailboxes + * + * This function initializes the mailbox for use. It will split the + * buffer provided an use that th populate both the Tx and Rx FIFO by + * evenly splitting it. In order to allow for easy masking of head/tail + * the value reported in size must be a power of 2 and is reported in + * DWORDs, not bytes. Any invalid values will cause the mailbox to return + * error. + **/ +s32 fm10k_pfvf_mbx_init(struct fm10k_hw *hw, struct fm10k_mbx_info *mbx, + const struct fm10k_msg_data *msg_data, u8 id) +{ + DEBUGFUNC("fm10k_pfvf_mbx_init"); + + /* initialize registers */ + switch (hw->mac.type) { + case fm10k_mac_vf: + mbx->mbx_reg = FM10K_VFMBX; + mbx->mbmem_reg = FM10K_VFMBMEM(FM10K_VFMBMEM_VF_XOR); + break; + case fm10k_mac_pf: + /* there are only 64 VF <-> PF mailboxes */ + if (id < 64) { + mbx->mbx_reg = FM10K_MBX(id); + mbx->mbmem_reg = FM10K_MBMEM_VF(id, 0); + break; + } + /* fallthough */ + default: + return FM10K_MBX_ERR_NO_MBX; + } + + /* start out in closed state */ + mbx->state = FM10K_STATE_CLOSED; + + /* validate layout of handlers before assigning them */ + if (fm10k_mbx_validate_handlers(msg_data)) + return FM10K_ERR_PARAM; + + /* initialize the message handlers */ + mbx->msg_data = msg_data; + + /* start mailbox as timed out and let the reset_hw call + * set the timeout value to begin communications + */ + mbx->timeout = 0; + mbx->usec_delay = FM10K_MBX_INIT_DELAY; + + /* initialize tail and head */ + mbx->tail = 1; + mbx->head = 1; + + /* initialize CRC seeds */ + mbx->local = FM10K_MBX_CRC_SEED; + mbx->remote = FM10K_MBX_CRC_SEED; + + /* Split buffer for use by Tx/Rx FIFOs */ + mbx->max_size = FM10K_MBX_MSG_MAX_SIZE; + mbx->mbmem_len = FM10K_VFMBMEM_VF_XOR; + + /* initialize the FIFOs, sizes are in 4 byte increments */ + fm10k_fifo_init(&mbx->tx, mbx->buffer, FM10K_MBX_TX_BUFFER_SIZE); + fm10k_fifo_init(&mbx->rx, &mbx->buffer[FM10K_MBX_TX_BUFFER_SIZE], + FM10K_MBX_RX_BUFFER_SIZE); + + /* initialize function pointers */ + mbx->ops.connect = fm10k_mbx_connect; + mbx->ops.disconnect = fm10k_mbx_disconnect; + mbx->ops.rx_ready = fm10k_mbx_rx_ready; + mbx->ops.tx_ready = fm10k_mbx_tx_ready; + mbx->ops.tx_complete = fm10k_mbx_tx_complete; + mbx->ops.enqueue_tx = fm10k_mbx_enqueue_tx; + mbx->ops.process = fm10k_mbx_process; + mbx->ops.register_handlers = fm10k_mbx_register_handlers; + + return FM10K_SUCCESS; +} + +/** + * fm10k_sm_mbx_create_data_hdr - Generate a mailbox header for local FIFO + * @mbx: pointer to mailbox + * + * This function returns a connection mailbox header + **/ +STATIC void fm10k_sm_mbx_create_data_hdr(struct fm10k_mbx_info *mbx) +{ + if (mbx->tail_len) + mbx->mbx_lock |= FM10K_MBX_REQ; + + mbx->mbx_hdr = FM10K_MSG_HDR_FIELD_SET(mbx->tail, SM_TAIL) | + FM10K_MSG_HDR_FIELD_SET(mbx->remote, SM_VER) | + FM10K_MSG_HDR_FIELD_SET(mbx->head, SM_HEAD); +} + +/** + * fm10k_sm_mbx_create_connect_hdr - Generate a mailbox header for local FIFO + * @mbx: pointer to mailbox + * @err: error flags to report if any + * + * This function returns a connection mailbox header + **/ +STATIC void fm10k_sm_mbx_create_connect_hdr(struct fm10k_mbx_info *mbx, u8 err) +{ + if (mbx->local) + mbx->mbx_lock |= FM10K_MBX_REQ; + + mbx->mbx_hdr = FM10K_MSG_HDR_FIELD_SET(mbx->tail, SM_TAIL) | + FM10K_MSG_HDR_FIELD_SET(mbx->remote, SM_VER) | + FM10K_MSG_HDR_FIELD_SET(mbx->head, SM_HEAD) | + FM10K_MSG_HDR_FIELD_SET(err, SM_ERR); +} + +/** + * fm10k_sm_mbx_connect_reset - Reset following request for reset + * @mbx: pointer to mailbox + * + * This function resets the mailbox to a just connected state + **/ +STATIC void fm10k_sm_mbx_connect_reset(struct fm10k_mbx_info *mbx) +{ + /* flush any uncompleted work */ + fm10k_mbx_reset_work(mbx); + + /* set local version to max and remote version to 0 */ + mbx->local = FM10K_SM_MBX_VERSION; + mbx->remote = 0; + + /* initialize tail and head */ + mbx->tail = 1; + mbx->head = 1; + + /* reset state back to connect */ + mbx->state = FM10K_STATE_CONNECT; +} + +/** + * fm10k_sm_mbx_connect - Start switch manager mailbox connection + * @hw: pointer to hardware structure + * @mbx: pointer to mailbox + * + * This function will initiate a mailbox connection with the switch + * manager. To do this it will first disconnect the mailbox, and then + * reconnect it in order to complete a reset of the mailbox. + * + * This function will return an error if the mailbox has not been initiated + * or is currently in use. + **/ +STATIC s32 fm10k_sm_mbx_connect(struct fm10k_hw *hw, struct fm10k_mbx_info *mbx) +{ + DEBUGFUNC("fm10k_mbx_connect"); + + /* we cannot connect an uninitialized mailbox */ + if (!mbx->rx.buffer) + return FM10K_MBX_ERR_NO_SPACE; + + /* we cannot connect an already connected mailbox */ + if (mbx->state != FM10K_STATE_CLOSED) + return FM10K_MBX_ERR_BUSY; + + /* mailbox timeout can now become active */ + mbx->timeout = FM10K_MBX_INIT_TIMEOUT; + + /* Place mbx in ready to connect state */ + mbx->state = FM10K_STATE_CONNECT; + mbx->max_size = FM10K_MBX_MSG_MAX_SIZE; + + /* reset interface back to connect */ + fm10k_sm_mbx_connect_reset(mbx); + + /* enable interrupt and notify other party of new message */ + mbx->mbx_lock = FM10K_MBX_REQ_INTERRUPT | FM10K_MBX_ACK_INTERRUPT | + FM10K_MBX_INTERRUPT_ENABLE; + + /* generate and load connect header into mailbox */ + fm10k_sm_mbx_create_connect_hdr(mbx, 0); + fm10k_mbx_write(hw, mbx); + + /* enable interrupt and notify other party of new message */ + + return FM10K_SUCCESS; +} + +/** + * fm10k_sm_mbx_disconnect - Shutdown mailbox connection + * @hw: pointer to hardware structure + * @mbx: pointer to mailbox + * + * This function will shut down the mailbox. It places the mailbox first + * in the disconnect state, it then allows up to a predefined timeout for + * the mailbox to transition to close on its own. If this does not occur + * then the mailbox will be forced into the closed state. + * + * Any mailbox transactions not completed before calling this function + * are not guaranteed to complete and may be dropped. + **/ +STATIC void fm10k_sm_mbx_disconnect(struct fm10k_hw *hw, + struct fm10k_mbx_info *mbx) +{ + int timeout = mbx->timeout ? FM10K_MBX_DISCONNECT_TIMEOUT : 0; + + DEBUGFUNC("fm10k_sm_mbx_disconnect"); + + /* Place mbx in ready to disconnect state */ + mbx->state = FM10K_STATE_DISCONNECT; + + /* trigger interrupt to start shutdown process */ + FM10K_WRITE_REG(hw, mbx->mbx_reg, FM10K_MBX_REQ | + FM10K_MBX_INTERRUPT_DISABLE); + do { + usec_delay(FM10K_MBX_POLL_DELAY); + mbx->ops.process(hw, mbx); + timeout -= FM10K_MBX_POLL_DELAY; + } while ((timeout > 0) && (mbx->state != FM10K_STATE_CLOSED)); + + /* in case we didn't close just force the mailbox into shutdown */ + mbx->state = FM10K_STATE_CLOSED; + mbx->remote = 0; + fm10k_mbx_reset_work(mbx); + fm10k_fifo_drop_all(&mbx->tx); + + FM10K_WRITE_REG(hw, mbx->mbmem_reg, 0); +} + +/** + * fm10k_mbx_validate_fifo_hdr - Validate fields in the remote FIFO header + * @mbx: pointer to mailbox + * + * This function will parse up the fields in the mailbox header and return + * an error if the header contains any of a number of invalid configurations + * including unrecognized offsets or version numbers. + **/ +STATIC s32 fm10k_sm_mbx_validate_fifo_hdr(struct fm10k_mbx_info *mbx) +{ + const u32 *hdr = &mbx->mbx_hdr; + u16 tail, head, ver; + + DEBUGFUNC("fm10k_mbx_validate_msg_hdr"); + + tail = FM10K_MSG_HDR_FIELD_GET(*hdr, SM_TAIL); + ver = FM10K_MSG_HDR_FIELD_GET(*hdr, SM_VER); + head = FM10K_MSG_HDR_FIELD_GET(*hdr, SM_HEAD); + + switch (ver) { + case 0: + break; + case FM10K_SM_MBX_VERSION: + if (!head || head > FM10K_SM_MBX_FIFO_LEN) + return FM10K_MBX_ERR_HEAD; + if (!tail || tail > FM10K_SM_MBX_FIFO_LEN) + return FM10K_MBX_ERR_TAIL; + if (mbx->tail < head) + head += mbx->mbmem_len - 1; + if (tail < mbx->head) + tail += mbx->mbmem_len - 1; + if (fm10k_mbx_index_len(mbx, head, mbx->tail) > mbx->tail_len) + return FM10K_MBX_ERR_HEAD; + if (fm10k_mbx_index_len(mbx, mbx->head, tail) < mbx->mbmem_len) + break; + return FM10K_MBX_ERR_TAIL; + default: + return FM10K_MBX_ERR_SRC; + } + + return FM10K_SUCCESS; +} + +/** + * fm10k_sm_mbx_process_error - Process header with error flag set + * @mbx: pointer to mailbox + * + * This function is meant to respond to a request where the error flag + * is set. As a result we will terminate a connection if one is present + * and fall back into the reset state with a connection header of version + * 0 (RESET). + **/ +STATIC void fm10k_sm_mbx_process_error(struct fm10k_mbx_info *mbx) +{ + const enum fm10k_mbx_state state = mbx->state; + + switch (state) { + case FM10K_STATE_DISCONNECT: + /* if there is an error just disconnect */ + mbx->remote = 0; + break; + case FM10K_STATE_OPEN: + /* flush any uncompleted work */ + fm10k_sm_mbx_connect_reset(mbx); + break; + case FM10K_STATE_CONNECT: + /* try connnecting at lower version */ + if (mbx->remote) { + while (mbx->local > 1) + mbx->local--; + mbx->remote = 0; + } + break; + default: + break; + } + + fm10k_sm_mbx_create_connect_hdr(mbx, 0); +} + +/** + * fm10k_sm_mbx_create_error_message - Process an error in FIFO hdr + * @mbx: pointer to mailbox + * @err: local error encountered + * + * This function will interpret the error provided by err, and based on + * that it may set the error bit in the local message header + **/ +STATIC void fm10k_sm_mbx_create_error_msg(struct fm10k_mbx_info *mbx, s32 err) +{ + /* only generate an error message for these types */ + switch (err) { + case FM10K_MBX_ERR_TAIL: + case FM10K_MBX_ERR_HEAD: + case FM10K_MBX_ERR_SRC: + case FM10K_MBX_ERR_SIZE: + case FM10K_MBX_ERR_RSVD0: + break; + default: + return; + } + + /* process it as though we received an error, and send error reply */ + fm10k_sm_mbx_process_error(mbx); + fm10k_sm_mbx_create_connect_hdr(mbx, 1); +} + +/** + * fm10k_sm_mbx_receive - Take message from Rx mailbox FIFO and put it in Rx + * @hw: pointer to hardware structure + * @mbx: pointer to mailbox + * + * This function will dequeue one message from the Rx switch manager mailbox + * FIFO and place it in the Rx mailbox FIFO for processing by software. + **/ +STATIC s32 fm10k_sm_mbx_receive(struct fm10k_hw *hw, + struct fm10k_mbx_info *mbx, + u16 tail) +{ + /* reduce length by 1 to convert to a mask */ + u16 mbmem_len = mbx->mbmem_len - 1; + s32 err; + + DEBUGFUNC("fm10k_sm_mbx_receive"); + + /* push tail in front of head */ + if (tail < mbx->head) + tail += mbmem_len; + + /* copy data to the Rx FIFO */ + err = fm10k_mbx_push_tail(hw, mbx, tail); + if (err < 0) + return err; + + /* process messages if we have received any */ + fm10k_mbx_dequeue_rx(hw, mbx); + + /* guarantee head aligns with the end of the last message */ + mbx->head = fm10k_mbx_head_sub(mbx, mbx->pushed); + mbx->pushed = 0; + + /* clear any extra bits left over since index adds 1 extra bit */ + if (mbx->head > mbmem_len) + mbx->head -= mbmem_len; + + return err; +} + +/** + * fm10k_sm_mbx_transmit - Take message from Tx and put it in Tx mailbox FIFO + * @hw: pointer to hardware structure + * @mbx: pointer to mailbox + * + * This function will dequeue one message from the Tx mailbox FIFO and place + * it in the Tx switch manager mailbox FIFO for processing by hardware. + **/ +STATIC void fm10k_sm_mbx_transmit(struct fm10k_hw *hw, + struct fm10k_mbx_info *mbx, u16 head) +{ + struct fm10k_mbx_fifo *fifo = &mbx->tx; + /* reduce length by 1 to convert to a mask */ + u16 mbmem_len = mbx->mbmem_len - 1; + u16 tail_len, len = 0; + u32 *msg; + + DEBUGFUNC("fm10k_sm_mbx_transmit"); + + /* push head behind tail */ + if (mbx->tail < head) + head += mbmem_len; + + fm10k_mbx_pull_head(hw, mbx, head); + + /* determine msg aligned offset for end of buffer */ + do { + msg = fifo->buffer + fm10k_fifo_head_offset(fifo, len); + tail_len = len; + len += FM10K_TLV_DWORD_LEN(*msg); + } while ((len <= mbx->tail_len) && (len < mbmem_len)); + + /* guarantee we stop on a message boundary */ + if (mbx->tail_len > tail_len) { + mbx->tail = fm10k_mbx_tail_sub(mbx, mbx->tail_len - tail_len); + mbx->tail_len = tail_len; + } + + /* clear any extra bits left over since index adds 1 extra bit */ + if (mbx->tail > mbmem_len) + mbx->tail -= mbmem_len; +} + +/** + * fm10k_sm_mbx_create_reply - Generate reply based on state and remote head + * @mbx: pointer to mailbox + * @head: acknowledgement number + * + * This function will generate an outgoing message based on the current + * mailbox state and the remote fifo head. It will return the length + * of the outgoing message excluding header on success, and a negative value + * on error. + **/ +STATIC void fm10k_sm_mbx_create_reply(struct fm10k_hw *hw, + struct fm10k_mbx_info *mbx, u16 head) +{ + switch (mbx->state) { + case FM10K_STATE_OPEN: + case FM10K_STATE_DISCONNECT: + /* flush out Tx data */ + fm10k_sm_mbx_transmit(hw, mbx, head); + + /* generate new header based on data */ + if (mbx->tail_len || (mbx->state == FM10K_STATE_OPEN)) { + fm10k_sm_mbx_create_data_hdr(mbx); + } else { + mbx->remote = 0; + fm10k_sm_mbx_create_connect_hdr(mbx, 0); + } + break; + case FM10K_STATE_CONNECT: + case FM10K_STATE_CLOSED: + fm10k_sm_mbx_create_connect_hdr(mbx, 0); + break; + default: + break; + } +} + +/** + * fm10k_sm_mbx_process_reset - Process header with version == 0 (RESET) + * @hw: pointer to hardware structure + * @mbx: pointer to mailbox + * + * This function is meant to respond to a request where the version data + * is set to 0. As such we will either terminate the connection or go + * into the connect state in order to re-establish the connection. This + * function can also be used to respond to an error as the connection + * resetting would also be a means of dealing with errors. + **/ +STATIC void fm10k_sm_mbx_process_reset(struct fm10k_hw *hw, + struct fm10k_mbx_info *mbx) +{ + const enum fm10k_mbx_state state = mbx->state; + + switch (state) { + case FM10K_STATE_DISCONNECT: + /* drop remote connections and disconnect */ + mbx->state = FM10K_STATE_CLOSED; + mbx->remote = 0; + mbx->local = 0; + break; + case FM10K_STATE_OPEN: + /* flush any incomplete work */ + fm10k_sm_mbx_connect_reset(mbx); + break; + case FM10K_STATE_CONNECT: + /* Update remote value to match local value */ + mbx->remote = mbx->local; + default: + break; + } + + fm10k_sm_mbx_create_reply(hw, mbx, mbx->tail); +} + +/** + * fm10k_sm_mbx_process_version_1 - Process header with version == 1 + * @hw: pointer to hardware structure + * @mbx: pointer to mailbox + * + * This function is meant to process messages received when the remote + * mailbox is active. + **/ +STATIC s32 fm10k_sm_mbx_process_version_1(struct fm10k_hw *hw, + struct fm10k_mbx_info *mbx) +{ + const u32 *hdr = &mbx->mbx_hdr; + u16 head, tail; + s32 len; + + /* pull all fields needed for verification */ + tail = FM10K_MSG_HDR_FIELD_GET(*hdr, SM_TAIL); + head = FM10K_MSG_HDR_FIELD_GET(*hdr, SM_HEAD); + + /* if we are in connect and wanting version 1 then start up and go */ + if (mbx->state == FM10K_STATE_CONNECT) { + if (!mbx->remote) + goto send_reply; + if (mbx->remote != 1) + return FM10K_MBX_ERR_SRC; + + mbx->state = FM10K_STATE_OPEN; + } + + do { + /* abort on message size errors */ + len = fm10k_sm_mbx_receive(hw, mbx, tail); + if (len < 0) + return len; + + /* continue until we have flushed the Rx FIFO */ + } while (len); + +send_reply: + fm10k_sm_mbx_create_reply(hw, mbx, head); + + return FM10K_SUCCESS; +} + +/** + * fm10k_sm_mbx_process - Process mailbox switch mailbox interrupt + * @hw: pointer to hardware structure + * @mbx: pointer to mailbox + * + * This function will process incoming mailbox events and generate mailbox + * replies. It will return a value indicating the number of DWORDs + * transmitted excluding header on success or a negative value on error. + **/ +STATIC s32 fm10k_sm_mbx_process(struct fm10k_hw *hw, + struct fm10k_mbx_info *mbx) +{ + s32 err; + + DEBUGFUNC("fm10k_sm_mbx_process"); + + /* we do not read mailbox if closed */ + if (mbx->state == FM10K_STATE_CLOSED) + return FM10K_SUCCESS; + + /* retrieve data from switch manager */ + err = fm10k_mbx_read(hw, mbx); + if (err) + return err; + + err = fm10k_sm_mbx_validate_fifo_hdr(mbx); + if (err < 0) + goto fifo_err; + + if (FM10K_MSG_HDR_FIELD_GET(mbx->mbx_hdr, SM_ERR)) { + fm10k_sm_mbx_process_error(mbx); + goto fifo_err; + } + + switch (FM10K_MSG_HDR_FIELD_GET(mbx->mbx_hdr, SM_VER)) { + case 0: + fm10k_sm_mbx_process_reset(hw, mbx); + break; + case FM10K_SM_MBX_VERSION: + err = fm10k_sm_mbx_process_version_1(hw, mbx); + break; + } + +fifo_err: + if (err < 0) + fm10k_sm_mbx_create_error_msg(mbx, err); + + /* report data to switch manager */ + fm10k_mbx_write(hw, mbx); + + return err; +} + +/** + * fm10k_sm_mbx_init - Initialize mailbox memory for PF/SM mailbox + * @hw: pointer to hardware structure + * @mbx: pointer to mailbox + * @msg_data: handlers for mailbox events + * + * This function for now is used to stub out the PF/SM mailbox + **/ +s32 fm10k_sm_mbx_init(struct fm10k_hw *hw, struct fm10k_mbx_info *mbx, + const struct fm10k_msg_data *msg_data) +{ + DEBUGFUNC("fm10k_sm_mbx_init"); + UNREFERENCED_1PARAMETER(hw); + + mbx->mbx_reg = FM10K_GMBX; + mbx->mbmem_reg = FM10K_MBMEM_PF(0); + + /* start out in closed state */ + mbx->state = FM10K_STATE_CLOSED; + + /* validate layout of handlers before assigning them */ + if (fm10k_mbx_validate_handlers(msg_data)) + return FM10K_ERR_PARAM; + + /* initialize the message handlers */ + mbx->msg_data = msg_data; + + /* start mailbox as timed out and let the reset_hw call + * set the timeout value to begin communications + */ + mbx->timeout = 0; + mbx->usec_delay = FM10K_MBX_INIT_DELAY; + + /* Split buffer for use by Tx/Rx FIFOs */ + mbx->max_size = FM10K_MBX_MSG_MAX_SIZE; + mbx->mbmem_len = FM10K_MBMEM_PF_XOR; + + /* initialize the FIFOs, sizes are in 4 byte increments */ + fm10k_fifo_init(&mbx->tx, mbx->buffer, FM10K_MBX_TX_BUFFER_SIZE); + fm10k_fifo_init(&mbx->rx, &mbx->buffer[FM10K_MBX_TX_BUFFER_SIZE], + FM10K_MBX_RX_BUFFER_SIZE); + + /* initialize function pointers */ + mbx->ops.connect = fm10k_sm_mbx_connect; + mbx->ops.disconnect = fm10k_sm_mbx_disconnect; + mbx->ops.rx_ready = fm10k_mbx_rx_ready; + mbx->ops.tx_ready = fm10k_mbx_tx_ready; + mbx->ops.tx_complete = fm10k_mbx_tx_complete; + mbx->ops.enqueue_tx = fm10k_mbx_enqueue_tx; + mbx->ops.process = fm10k_sm_mbx_process; + mbx->ops.register_handlers = fm10k_mbx_register_handlers; + + return FM10K_SUCCESS; +} |