diff options
Diffstat (limited to 'src/dpdk_lib18/librte_eal/linuxapp/kni/ethtool/igb/e1000_82575.c')
| -rwxr-xr-x | src/dpdk_lib18/librte_eal/linuxapp/kni/ethtool/igb/e1000_82575.c | 3665 |
1 files changed, 0 insertions, 3665 deletions
diff --git a/src/dpdk_lib18/librte_eal/linuxapp/kni/ethtool/igb/e1000_82575.c b/src/dpdk_lib18/librte_eal/linuxapp/kni/ethtool/igb/e1000_82575.c deleted file mode 100755 index b8c9a13f..00000000 --- a/src/dpdk_lib18/librte_eal/linuxapp/kni/ethtool/igb/e1000_82575.c +++ /dev/null @@ -1,3665 +0,0 @@ -/******************************************************************************* - - Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007-2013 Intel Corporation. - - This program is free software; you can redistribute it and/or modify it - under the terms and conditions of the GNU General Public License, - version 2, as published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - more details. - - You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., - 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - - The full GNU General Public License is included in this distribution in - the file called "COPYING". - - Contact Information: - e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - -/* - * 82575EB Gigabit Network Connection - * 82575EB Gigabit Backplane Connection - * 82575GB Gigabit Network Connection - * 82576 Gigabit Network Connection - * 82576 Quad Port Gigabit Mezzanine Adapter - * 82580 Gigabit Network Connection - * I350 Gigabit Network Connection - */ - -#include "e1000_api.h" -#include "e1000_i210.h" - -static s32 e1000_init_phy_params_82575(struct e1000_hw *hw); -static s32 e1000_init_mac_params_82575(struct e1000_hw *hw); -static s32 e1000_acquire_phy_82575(struct e1000_hw *hw); -static void e1000_release_phy_82575(struct e1000_hw *hw); -static s32 e1000_acquire_nvm_82575(struct e1000_hw *hw); -static void e1000_release_nvm_82575(struct e1000_hw *hw); -static s32 e1000_check_for_link_82575(struct e1000_hw *hw); -static s32 e1000_check_for_link_media_swap(struct e1000_hw *hw); -static s32 e1000_get_cfg_done_82575(struct e1000_hw *hw); -static s32 e1000_get_link_up_info_82575(struct e1000_hw *hw, u16 *speed, - u16 *duplex); -static s32 e1000_init_hw_82575(struct e1000_hw *hw); -static s32 e1000_phy_hw_reset_sgmii_82575(struct e1000_hw *hw); -static s32 e1000_read_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset, - u16 *data); -static s32 e1000_reset_hw_82575(struct e1000_hw *hw); -static s32 e1000_reset_hw_82580(struct e1000_hw *hw); -static s32 e1000_read_phy_reg_82580(struct e1000_hw *hw, - u32 offset, u16 *data); -static s32 e1000_write_phy_reg_82580(struct e1000_hw *hw, - u32 offset, u16 data); -static s32 e1000_set_d0_lplu_state_82580(struct e1000_hw *hw, - bool active); -static s32 e1000_set_d3_lplu_state_82580(struct e1000_hw *hw, - bool active); -static s32 e1000_set_d0_lplu_state_82575(struct e1000_hw *hw, - bool active); -static s32 e1000_setup_copper_link_82575(struct e1000_hw *hw); -static s32 e1000_setup_serdes_link_82575(struct e1000_hw *hw); -static s32 e1000_get_media_type_82575(struct e1000_hw *hw); -static s32 e1000_set_sfp_media_type_82575(struct e1000_hw *hw); -static s32 e1000_valid_led_default_82575(struct e1000_hw *hw, u16 *data); -static s32 e1000_write_phy_reg_sgmii_82575(struct e1000_hw *hw, - u32 offset, u16 data); -static void e1000_clear_hw_cntrs_82575(struct e1000_hw *hw); -static s32 e1000_acquire_swfw_sync_82575(struct e1000_hw *hw, u16 mask); -static s32 e1000_get_pcs_speed_and_duplex_82575(struct e1000_hw *hw, - u16 *speed, u16 *duplex); -static s32 e1000_get_phy_id_82575(struct e1000_hw *hw); -static void e1000_release_swfw_sync_82575(struct e1000_hw *hw, u16 mask); -static bool e1000_sgmii_active_82575(struct e1000_hw *hw); -static s32 e1000_reset_init_script_82575(struct e1000_hw *hw); -static s32 e1000_read_mac_addr_82575(struct e1000_hw *hw); -static void e1000_config_collision_dist_82575(struct e1000_hw *hw); -static void e1000_power_down_phy_copper_82575(struct e1000_hw *hw); -static void e1000_shutdown_serdes_link_82575(struct e1000_hw *hw); -static void e1000_power_up_serdes_link_82575(struct e1000_hw *hw); -static s32 e1000_set_pcie_completion_timeout(struct e1000_hw *hw); -static s32 e1000_reset_mdicnfg_82580(struct e1000_hw *hw); -static s32 e1000_validate_nvm_checksum_82580(struct e1000_hw *hw); -static s32 e1000_update_nvm_checksum_82580(struct e1000_hw *hw); -static s32 e1000_update_nvm_checksum_with_offset(struct e1000_hw *hw, - u16 offset); -static s32 e1000_validate_nvm_checksum_with_offset(struct e1000_hw *hw, - u16 offset); -static s32 e1000_validate_nvm_checksum_i350(struct e1000_hw *hw); -static s32 e1000_update_nvm_checksum_i350(struct e1000_hw *hw); -static void e1000_write_vfta_i350(struct e1000_hw *hw, u32 offset, u32 value); -static void e1000_clear_vfta_i350(struct e1000_hw *hw); - -static void e1000_i2c_start(struct e1000_hw *hw); -static void e1000_i2c_stop(struct e1000_hw *hw); -static s32 e1000_clock_in_i2c_byte(struct e1000_hw *hw, u8 *data); -static s32 e1000_clock_out_i2c_byte(struct e1000_hw *hw, u8 data); -static s32 e1000_get_i2c_ack(struct e1000_hw *hw); -static s32 e1000_clock_in_i2c_bit(struct e1000_hw *hw, bool *data); -static s32 e1000_clock_out_i2c_bit(struct e1000_hw *hw, bool data); -static void e1000_raise_i2c_clk(struct e1000_hw *hw, u32 *i2cctl); -static void e1000_lower_i2c_clk(struct e1000_hw *hw, u32 *i2cctl); -static s32 e1000_set_i2c_data(struct e1000_hw *hw, u32 *i2cctl, bool data); -static bool e1000_get_i2c_data(u32 *i2cctl); - -static const u16 e1000_82580_rxpbs_table[] = { - 36, 72, 144, 1, 2, 4, 8, 16, 35, 70, 140 }; -#define E1000_82580_RXPBS_TABLE_SIZE \ - (sizeof(e1000_82580_rxpbs_table)/sizeof(u16)) - - -/** - * e1000_sgmii_uses_mdio_82575 - Determine if I2C pins are for external MDIO - * @hw: pointer to the HW structure - * - * Called to determine if the I2C pins are being used for I2C or as an - * external MDIO interface since the two options are mutually exclusive. - **/ -static bool e1000_sgmii_uses_mdio_82575(struct e1000_hw *hw) -{ - u32 reg = 0; - bool ext_mdio = false; - - DEBUGFUNC("e1000_sgmii_uses_mdio_82575"); - - switch (hw->mac.type) { - case e1000_82575: - case e1000_82576: - reg = E1000_READ_REG(hw, E1000_MDIC); - ext_mdio = !!(reg & E1000_MDIC_DEST); - break; - case e1000_82580: - case e1000_i350: - case e1000_i354: - case e1000_i210: - case e1000_i211: - reg = E1000_READ_REG(hw, E1000_MDICNFG); - ext_mdio = !!(reg & E1000_MDICNFG_EXT_MDIO); - break; - default: - break; - } - return ext_mdio; -} - -/** - * e1000_init_phy_params_82575 - Init PHY func ptrs. - * @hw: pointer to the HW structure - **/ -static s32 e1000_init_phy_params_82575(struct e1000_hw *hw) -{ - struct e1000_phy_info *phy = &hw->phy; - s32 ret_val = E1000_SUCCESS; - u32 ctrl_ext; - - DEBUGFUNC("e1000_init_phy_params_82575"); - - phy->ops.read_i2c_byte = e1000_read_i2c_byte_generic; - phy->ops.write_i2c_byte = e1000_write_i2c_byte_generic; - - if (hw->phy.media_type != e1000_media_type_copper) { - phy->type = e1000_phy_none; - goto out; - } - - phy->ops.power_up = e1000_power_up_phy_copper; - phy->ops.power_down = e1000_power_down_phy_copper_82575; - - phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; - phy->reset_delay_us = 100; - - phy->ops.acquire = e1000_acquire_phy_82575; - phy->ops.check_reset_block = e1000_check_reset_block_generic; - phy->ops.commit = e1000_phy_sw_reset_generic; - phy->ops.get_cfg_done = e1000_get_cfg_done_82575; - phy->ops.release = e1000_release_phy_82575; - - ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); - - if (e1000_sgmii_active_82575(hw)) { - phy->ops.reset = e1000_phy_hw_reset_sgmii_82575; - ctrl_ext |= E1000_CTRL_I2C_ENA; - } else { - phy->ops.reset = e1000_phy_hw_reset_generic; - ctrl_ext &= ~E1000_CTRL_I2C_ENA; - } - - E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext); - e1000_reset_mdicnfg_82580(hw); - - if (e1000_sgmii_active_82575(hw) && !e1000_sgmii_uses_mdio_82575(hw)) { - phy->ops.read_reg = e1000_read_phy_reg_sgmii_82575; - phy->ops.write_reg = e1000_write_phy_reg_sgmii_82575; - } else { - switch (hw->mac.type) { - case e1000_82580: - case e1000_i350: - case e1000_i354: - phy->ops.read_reg = e1000_read_phy_reg_82580; - phy->ops.write_reg = e1000_write_phy_reg_82580; - break; - case e1000_i210: - case e1000_i211: - phy->ops.read_reg = e1000_read_phy_reg_gs40g; - phy->ops.write_reg = e1000_write_phy_reg_gs40g; - break; - default: - phy->ops.read_reg = e1000_read_phy_reg_igp; - phy->ops.write_reg = e1000_write_phy_reg_igp; - } - } - - /* Set phy->phy_addr and phy->id. */ - ret_val = e1000_get_phy_id_82575(hw); - - /* Verify phy id and set remaining function pointers */ - switch (phy->id) { - case M88E1543_E_PHY_ID: - case I347AT4_E_PHY_ID: - case M88E1112_E_PHY_ID: - case M88E1340M_E_PHY_ID: - case M88E1111_I_PHY_ID: - phy->type = e1000_phy_m88; - phy->ops.check_polarity = e1000_check_polarity_m88; - phy->ops.get_info = e1000_get_phy_info_m88; - if (phy->id == I347AT4_E_PHY_ID || - phy->id == M88E1112_E_PHY_ID || - phy->id == M88E1340M_E_PHY_ID) - phy->ops.get_cable_length = - e1000_get_cable_length_m88_gen2; - else if (phy->id == M88E1543_E_PHY_ID) - phy->ops.get_cable_length = - e1000_get_cable_length_m88_gen2; - else - phy->ops.get_cable_length = e1000_get_cable_length_m88; - phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_m88; - /* Check if this PHY is confgured for media swap. */ - if (phy->id == M88E1112_E_PHY_ID) { - u16 data; - - ret_val = phy->ops.write_reg(hw, - E1000_M88E1112_PAGE_ADDR, - 2); - if (ret_val) - goto out; - - ret_val = phy->ops.read_reg(hw, - E1000_M88E1112_MAC_CTRL_1, - &data); - if (ret_val) - goto out; - - data = (data & E1000_M88E1112_MAC_CTRL_1_MODE_MASK) >> - E1000_M88E1112_MAC_CTRL_1_MODE_SHIFT; - if (data == E1000_M88E1112_AUTO_COPPER_SGMII || - data == E1000_M88E1112_AUTO_COPPER_BASEX) - hw->mac.ops.check_for_link = - e1000_check_for_link_media_swap; - } - break; - case IGP03E1000_E_PHY_ID: - case IGP04E1000_E_PHY_ID: - phy->type = e1000_phy_igp_3; - phy->ops.check_polarity = e1000_check_polarity_igp; - phy->ops.get_info = e1000_get_phy_info_igp; - phy->ops.get_cable_length = e1000_get_cable_length_igp_2; - phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_igp; - phy->ops.set_d0_lplu_state = e1000_set_d0_lplu_state_82575; - phy->ops.set_d3_lplu_state = e1000_set_d3_lplu_state_generic; - break; - case I82580_I_PHY_ID: - case I350_I_PHY_ID: - phy->type = e1000_phy_82580; - phy->ops.check_polarity = e1000_check_polarity_82577; - phy->ops.force_speed_duplex = - e1000_phy_force_speed_duplex_82577; - phy->ops.get_cable_length = e1000_get_cable_length_82577; - phy->ops.get_info = e1000_get_phy_info_82577; - phy->ops.set_d0_lplu_state = e1000_set_d0_lplu_state_82580; - phy->ops.set_d3_lplu_state = e1000_set_d3_lplu_state_82580; - break; - case I210_I_PHY_ID: - phy->type = e1000_phy_i210; - phy->ops.check_polarity = e1000_check_polarity_m88; - phy->ops.get_info = e1000_get_phy_info_m88; - phy->ops.get_cable_length = e1000_get_cable_length_m88_gen2; - phy->ops.set_d0_lplu_state = e1000_set_d0_lplu_state_82580; - phy->ops.set_d3_lplu_state = e1000_set_d3_lplu_state_82580; - phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_m88; - break; - default: - ret_val = -E1000_ERR_PHY; - goto out; - } - -out: - return ret_val; -} - -/** - * e1000_init_nvm_params_82575 - Init NVM func ptrs. - * @hw: pointer to the HW structure - **/ -s32 e1000_init_nvm_params_82575(struct e1000_hw *hw) -{ - struct e1000_nvm_info *nvm = &hw->nvm; - u32 eecd = E1000_READ_REG(hw, E1000_EECD); - u16 size; - - DEBUGFUNC("e1000_init_nvm_params_82575"); - - size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >> - E1000_EECD_SIZE_EX_SHIFT); - /* - * Added to a constant, "size" becomes the left-shift value - * for setting word_size. - */ - size += NVM_WORD_SIZE_BASE_SHIFT; - - /* Just in case size is out of range, cap it to the largest - * EEPROM size supported - */ - if (size > 15) - size = 15; - - nvm->word_size = 1 << size; - if (hw->mac.type < e1000_i210) { - nvm->opcode_bits = 8; - nvm->delay_usec = 1; - - switch (nvm->override) { - case e1000_nvm_override_spi_large: - nvm->page_size = 32; - nvm->address_bits = 16; - break; - case e1000_nvm_override_spi_small: - nvm->page_size = 8; - nvm->address_bits = 8; - break; - default: - nvm->page_size = eecd & E1000_EECD_ADDR_BITS ? 32 : 8; - nvm->address_bits = eecd & E1000_EECD_ADDR_BITS ? - 16 : 8; - break; - } - if (nvm->word_size == (1 << 15)) - nvm->page_size = 128; - - nvm->type = e1000_nvm_eeprom_spi; - } else { - nvm->type = e1000_nvm_flash_hw; - } - - /* Function Pointers */ - nvm->ops.acquire = e1000_acquire_nvm_82575; - nvm->ops.release = e1000_release_nvm_82575; - if (nvm->word_size < (1 << 15)) - nvm->ops.read = e1000_read_nvm_eerd; - else - nvm->ops.read = e1000_read_nvm_spi; - - nvm->ops.write = e1000_write_nvm_spi; - nvm->ops.validate = e1000_validate_nvm_checksum_generic; - nvm->ops.update = e1000_update_nvm_checksum_generic; - nvm->ops.valid_led_default = e1000_valid_led_default_82575; - - /* override generic family function pointers for specific descendants */ - switch (hw->mac.type) { - case e1000_82580: - nvm->ops.validate = e1000_validate_nvm_checksum_82580; - nvm->ops.update = e1000_update_nvm_checksum_82580; - break; - case e1000_i350: - //case e1000_i354: - nvm->ops.validate = e1000_validate_nvm_checksum_i350; - nvm->ops.update = e1000_update_nvm_checksum_i350; - break; - default: - break; - } - - return E1000_SUCCESS; -} - -/** - * e1000_init_mac_params_82575 - Init MAC func ptrs. - * @hw: pointer to the HW structure - **/ -static s32 e1000_init_mac_params_82575(struct e1000_hw *hw) -{ - struct e1000_mac_info *mac = &hw->mac; - struct e1000_dev_spec_82575 *dev_spec = &hw->dev_spec._82575; - - DEBUGFUNC("e1000_init_mac_params_82575"); - - /* Derives media type */ - e1000_get_media_type_82575(hw); - /* Set mta register count */ - mac->mta_reg_count = 128; - /* Set uta register count */ - mac->uta_reg_count = (hw->mac.type == e1000_82575) ? 0 : 128; - /* Set rar entry count */ - mac->rar_entry_count = E1000_RAR_ENTRIES_82575; - if (mac->type == e1000_82576) - mac->rar_entry_count = E1000_RAR_ENTRIES_82576; - if (mac->type == e1000_82580) - mac->rar_entry_count = E1000_RAR_ENTRIES_82580; - if (mac->type == e1000_i350 || mac->type == e1000_i354) - mac->rar_entry_count = E1000_RAR_ENTRIES_I350; - - /* Enable EEE default settings for EEE supported devices */ - if (mac->type >= e1000_i350) - dev_spec->eee_disable = false; - - /* Allow a single clear of the SW semaphore on I210 and newer */ - if (mac->type >= e1000_i210) - dev_spec->clear_semaphore_once = true; - - /* Set if part includes ASF firmware */ - mac->asf_firmware_present = true; - /* FWSM register */ - mac->has_fwsm = true; - /* ARC supported; valid only if manageability features are enabled. */ - mac->arc_subsystem_valid = - !!(E1000_READ_REG(hw, E1000_FWSM) & E1000_FWSM_MODE_MASK); - - /* Function pointers */ - - /* bus type/speed/width */ - mac->ops.get_bus_info = e1000_get_bus_info_pcie_generic; - /* reset */ - if (mac->type >= e1000_82580) - mac->ops.reset_hw = e1000_reset_hw_82580; - else - mac->ops.reset_hw = e1000_reset_hw_82575; - /* hw initialization */ - mac->ops.init_hw = e1000_init_hw_82575; - /* link setup */ - mac->ops.setup_link = e1000_setup_link_generic; - /* physical interface link setup */ - mac->ops.setup_physical_interface = - (hw->phy.media_type == e1000_media_type_copper) - ? e1000_setup_copper_link_82575 : e1000_setup_serdes_link_82575; - /* physical interface shutdown */ - mac->ops.shutdown_serdes = e1000_shutdown_serdes_link_82575; - /* physical interface power up */ - mac->ops.power_up_serdes = e1000_power_up_serdes_link_82575; - /* check for link */ - mac->ops.check_for_link = e1000_check_for_link_82575; - /* read mac address */ - mac->ops.read_mac_addr = e1000_read_mac_addr_82575; - /* configure collision distance */ - mac->ops.config_collision_dist = e1000_config_collision_dist_82575; - /* multicast address update */ - mac->ops.update_mc_addr_list = e1000_update_mc_addr_list_generic; - if (hw->mac.type == e1000_i350 || mac->type == e1000_i354) { - /* writing VFTA */ - mac->ops.write_vfta = e1000_write_vfta_i350; - /* clearing VFTA */ - mac->ops.clear_vfta = e1000_clear_vfta_i350; - } else { - /* writing VFTA */ - mac->ops.write_vfta = e1000_write_vfta_generic; - /* clearing VFTA */ - mac->ops.clear_vfta = e1000_clear_vfta_generic; - } - if (hw->mac.type >= e1000_82580) - mac->ops.validate_mdi_setting = - e1000_validate_mdi_setting_crossover_generic; - /* ID LED init */ - mac->ops.id_led_init = e1000_id_led_init_generic; - /* blink LED */ - mac->ops.blink_led = e1000_blink_led_generic; - /* setup LED */ - mac->ops.setup_led = e1000_setup_led_generic; - /* cleanup LED */ - mac->ops.cleanup_led = e1000_cleanup_led_generic; - /* turn on/off LED */ - mac->ops.led_on = e1000_led_on_generic; - mac->ops.led_off = e1000_led_off_generic; - /* clear hardware counters */ - mac->ops.clear_hw_cntrs = e1000_clear_hw_cntrs_82575; - /* link info */ - mac->ops.get_link_up_info = e1000_get_link_up_info_82575; - /* get thermal sensor data */ - mac->ops.get_thermal_sensor_data = - e1000_get_thermal_sensor_data_generic; - mac->ops.init_thermal_sensor_thresh = - e1000_init_thermal_sensor_thresh_generic; - /* acquire SW_FW sync */ - mac->ops.acquire_swfw_sync = e1000_acquire_swfw_sync_82575; - mac->ops.release_swfw_sync = e1000_release_swfw_sync_82575; - if (mac->type >= e1000_i210) { - mac->ops.acquire_swfw_sync = e1000_acquire_swfw_sync_i210; - mac->ops.release_swfw_sync = e1000_release_swfw_sync_i210; - } - - /* set lan id for port to determine which phy lock to use */ - hw->mac.ops.set_lan_id(hw); - - return E1000_SUCCESS; -} - -/** - * e1000_init_function_pointers_82575 - Init func ptrs. - * @hw: pointer to the HW structure - * - * Called to initialize all function pointers and parameters. - **/ -void e1000_init_function_pointers_82575(struct e1000_hw *hw) -{ - DEBUGFUNC("e1000_init_function_pointers_82575"); - - hw->mac.ops.init_params = e1000_init_mac_params_82575; - hw->nvm.ops.init_params = e1000_init_nvm_params_82575; - hw->phy.ops.init_params = e1000_init_phy_params_82575; - hw->mbx.ops.init_params = e1000_init_mbx_params_pf; -} - -/** - * e1000_acquire_phy_82575 - Acquire rights to access PHY - * @hw: pointer to the HW structure - * - * Acquire access rights to the correct PHY. - **/ -static s32 e1000_acquire_phy_82575(struct e1000_hw *hw) -{ - u16 mask = E1000_SWFW_PHY0_SM; - - DEBUGFUNC("e1000_acquire_phy_82575"); - - if (hw->bus.func == E1000_FUNC_1) - mask = E1000_SWFW_PHY1_SM; - else if (hw->bus.func == E1000_FUNC_2) - mask = E1000_SWFW_PHY2_SM; - else if (hw->bus.func == E1000_FUNC_3) - mask = E1000_SWFW_PHY3_SM; - - return hw->mac.ops.acquire_swfw_sync(hw, mask); -} - -/** - * e1000_release_phy_82575 - Release rights to access PHY - * @hw: pointer to the HW structure - * - * A wrapper to release access rights to the correct PHY. - **/ -static void e1000_release_phy_82575(struct e1000_hw *hw) -{ - u16 mask = E1000_SWFW_PHY0_SM; - - DEBUGFUNC("e1000_release_phy_82575"); - - if (hw->bus.func == E1000_FUNC_1) - mask = E1000_SWFW_PHY1_SM; - else if (hw->bus.func == E1000_FUNC_2) - mask = E1000_SWFW_PHY2_SM; - else if (hw->bus.func == E1000_FUNC_3) - mask = E1000_SWFW_PHY3_SM; - - hw->mac.ops.release_swfw_sync(hw, mask); -} - -/** - * e1000_read_phy_reg_sgmii_82575 - Read PHY register using sgmii - * @hw: pointer to the HW structure - * @offset: register offset to be read - * @data: pointer to the read data - * - * Reads the PHY register at offset using the serial gigabit media independent - * interface and stores the retrieved information in data. - **/ -static s32 e1000_read_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset, - u16 *data) -{ - s32 ret_val = -E1000_ERR_PARAM; - - DEBUGFUNC("e1000_read_phy_reg_sgmii_82575"); - - if (offset > E1000_MAX_SGMII_PHY_REG_ADDR) { - DEBUGOUT1("PHY Address %u is out of range\n", offset); - goto out; - } - - ret_val = hw->phy.ops.acquire(hw); - if (ret_val) - goto out; - - ret_val = e1000_read_phy_reg_i2c(hw, offset, data); - - hw->phy.ops.release(hw); - -out: - return ret_val; -} - -/** - * e1000_write_phy_reg_sgmii_82575 - Write PHY register using sgmii - * @hw: pointer to the HW structure - * @offset: register offset to write to - * @data: data to write at register offset - * - * Writes the data to PHY register at the offset using the serial gigabit - * media independent interface. - **/ -static s32 e1000_write_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset, - u16 data) -{ - s32 ret_val = -E1000_ERR_PARAM; - - DEBUGFUNC("e1000_write_phy_reg_sgmii_82575"); - - if (offset > E1000_MAX_SGMII_PHY_REG_ADDR) { - DEBUGOUT1("PHY Address %d is out of range\n", offset); - goto out; - } - - ret_val = hw->phy.ops.acquire(hw); - if (ret_val) - goto out; - - ret_val = e1000_write_phy_reg_i2c(hw, offset, data); - - hw->phy.ops.release(hw); - -out: - return ret_val; -} - -/** - * e1000_get_phy_id_82575 - Retrieve PHY addr and id - * @hw: pointer to the HW structure - * - * Retrieves the PHY address and ID for both PHY's which do and do not use - * sgmi interface. - **/ -static s32 e1000_get_phy_id_82575(struct e1000_hw *hw) -{ - struct e1000_phy_info *phy = &hw->phy; - s32 ret_val = E1000_SUCCESS; - u16 phy_id; - u32 ctrl_ext; - u32 mdic; - - DEBUGFUNC("e1000_get_phy_id_82575"); - - /* i354 devices can have a PHY that needs an extra read for id */ - if (hw->mac.type == e1000_i354) - e1000_get_phy_id(hw); - - - /* - * For SGMII PHYs, we try the list of possible addresses until - * we find one that works. For non-SGMII PHYs - * (e.g. integrated copper PHYs), an address of 1 should - * work. The result of this function should mean phy->phy_addr - * and phy->id are set correctly. - */ - if (!e1000_sgmii_active_82575(hw)) { - phy->addr = 1; - ret_val = e1000_get_phy_id(hw); - goto out; - } - - if (e1000_sgmii_uses_mdio_82575(hw)) { - switch (hw->mac.type) { - case e1000_82575: - case e1000_82576: - mdic = E1000_READ_REG(hw, E1000_MDIC); - mdic &= E1000_MDIC_PHY_MASK; - phy->addr = mdic >> E1000_MDIC_PHY_SHIFT; - break; - case e1000_82580: - case e1000_i350: - case e1000_i354: - case e1000_i210: - case e1000_i211: - mdic = E1000_READ_REG(hw, E1000_MDICNFG); - mdic &= E1000_MDICNFG_PHY_MASK; - phy->addr = mdic >> E1000_MDICNFG_PHY_SHIFT; - break; - default: - ret_val = -E1000_ERR_PHY; - goto out; - break; - } - ret_val = e1000_get_phy_id(hw); - goto out; - } - - /* Power on sgmii phy if it is disabled */ - ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); - E1000_WRITE_REG(hw, E1000_CTRL_EXT, - ctrl_ext & ~E1000_CTRL_EXT_SDP3_DATA); - E1000_WRITE_FLUSH(hw); - msec_delay(300); - - /* - * The address field in the I2CCMD register is 3 bits and 0 is invalid. - * Therefore, we need to test 1-7 - */ - for (phy->addr = 1; phy->addr < 8; phy->addr++) { - ret_val = e1000_read_phy_reg_sgmii_82575(hw, PHY_ID1, &phy_id); - if (ret_val == E1000_SUCCESS) { - DEBUGOUT2("Vendor ID 0x%08X read at address %u\n", - phy_id, phy->addr); - /* - * At the time of this writing, The M88 part is - * the only supported SGMII PHY product. - */ - if (phy_id == M88_VENDOR) - break; - } else { - DEBUGOUT1("PHY address %u was unreadable\n", - phy->addr); - } - } - - /* A valid PHY type couldn't be found. */ - if (phy->addr == 8) { - phy->addr = 0; - ret_val = -E1000_ERR_PHY; - } else { - ret_val = e1000_get_phy_id(hw); - } - - /* restore previous sfp cage power state */ - E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext); - -out: - return ret_val; -} - -/** - * e1000_phy_hw_reset_sgmii_82575 - Performs a PHY reset - * @hw: pointer to the HW structure - * - * Resets the PHY using the serial gigabit media independent interface. - **/ -static s32 e1000_phy_hw_reset_sgmii_82575(struct e1000_hw *hw) -{ - s32 ret_val = E1000_SUCCESS; - - DEBUGFUNC("e1000_phy_hw_reset_sgmii_82575"); - - /* - * This isn't a true "hard" reset, but is the only reset - * available to us at this time. - */ - - DEBUGOUT("Soft resetting SGMII attached PHY...\n"); - - if (!(hw->phy.ops.write_reg)) - goto out; - - /* - * SFP documentation requires the following to configure the SPF module - * to work on SGMII. No further documentation is given. - */ - ret_val = hw->phy.ops.write_reg(hw, 0x1B, 0x8084); - if (ret_val) - goto out; - - ret_val = hw->phy.ops.commit(hw); - -out: - return ret_val; -} - -/** - * e1000_set_d0_lplu_state_82575 - Set Low Power Linkup D0 state - * @hw: pointer to the HW structure - * @active: true to enable LPLU, false to disable - * - * Sets the LPLU D0 state according to the active flag. When - * activating LPLU this function also disables smart speed - * and vice versa. LPLU will not be activated unless the - * device autonegotiation advertisement meets standards of - * either 10 or 10/100 or 10/100/1000 at all duplexes. - * This is a function pointer entry point only called by - * PHY setup routines. - **/ -static s32 e1000_set_d0_lplu_state_82575(struct e1000_hw *hw, bool active) -{ - struct e1000_phy_info *phy = &hw->phy; - s32 ret_val = E1000_SUCCESS; - u16 data; - - DEBUGFUNC("e1000_set_d0_lplu_state_82575"); - - if (!(hw->phy.ops.read_reg)) - goto out; - - ret_val = phy->ops.read_reg(hw, IGP02E1000_PHY_POWER_MGMT, &data); - if (ret_val) - goto out; - - if (active) { - data |= IGP02E1000_PM_D0_LPLU; - ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT, - data); - if (ret_val) - goto out; - - /* When LPLU is enabled, we should disable SmartSpeed */ - ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CONFIG, - &data); - data &= ~IGP01E1000_PSCFR_SMART_SPEED; - ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_PORT_CONFIG, - data); - if (ret_val) - goto out; - } else { - data &= ~IGP02E1000_PM_D0_LPLU; - ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT, - data); - /* - * LPLU and SmartSpeed are mutually exclusive. LPLU is used - * during Dx states where the power conservation is most - * important. During driver activity we should enable - * SmartSpeed, so performance is maintained. - */ - if (phy->smart_speed == e1000_smart_speed_on) { - ret_val = phy->ops.read_reg(hw, - IGP01E1000_PHY_PORT_CONFIG, - &data); - if (ret_val) - goto out; - - data |= IGP01E1000_PSCFR_SMART_SPEED; - ret_val = phy->ops.write_reg(hw, - IGP01E1000_PHY_PORT_CONFIG, - data); - if (ret_val) - goto out; - } else if (phy->smart_speed == e1000_smart_speed_off) { - ret_val = phy->ops.read_reg(hw, - IGP01E1000_PHY_PORT_CONFIG, - &data); - if (ret_val) - goto out; - - data &= ~IGP01E1000_PSCFR_SMART_SPEED; - ret_val = phy->ops.write_reg(hw, - IGP01E1000_PHY_PORT_CONFIG, - data); - if (ret_val) - goto out; - } - } - -out: - return ret_val; -} - -/** - * e1000_set_d0_lplu_state_82580 - Set Low Power Linkup D0 state - * @hw: pointer to the HW structure - * @active: true to enable LPLU, false to disable - * - * Sets the LPLU D0 state according to the active flag. When - * activating LPLU this function also disables smart speed - * and vice versa. LPLU will not be activated unless the - * device autonegotiation advertisement meets standards of - * either 10 or 10/100 or 10/100/1000 at all duplexes. - * This is a function pointer entry point only called by - * PHY setup routines. - **/ -static s32 e1000_set_d0_lplu_state_82580(struct e1000_hw *hw, bool active) -{ - struct e1000_phy_info *phy = &hw->phy; - s32 ret_val = E1000_SUCCESS; - u32 data; - - DEBUGFUNC("e1000_set_d0_lplu_state_82580"); - - data = E1000_READ_REG(hw, E1000_82580_PHY_POWER_MGMT); - - if (active) { - data |= E1000_82580_PM_D0_LPLU; - - /* When LPLU is enabled, we should disable SmartSpeed */ - data &= ~E1000_82580_PM_SPD; - } else { - data &= ~E1000_82580_PM_D0_LPLU; - - /* - * LPLU and SmartSpeed are mutually exclusive. LPLU is used - * during Dx states where the power conservation is most - * important. During driver activity we should enable - * SmartSpeed, so performance is maintained. - */ - if (phy->smart_speed == e1000_smart_speed_on) - data |= E1000_82580_PM_SPD; - else if (phy->smart_speed == e1000_smart_speed_off) - data &= ~E1000_82580_PM_SPD; - } - - E1000_WRITE_REG(hw, E1000_82580_PHY_POWER_MGMT, data); - return ret_val; -} - -/** - * e1000_set_d3_lplu_state_82580 - Sets low power link up state for D3 - * @hw: pointer to the HW structure - * @active: boolean used to enable/disable lplu - * - * Success returns 0, Failure returns 1 - * - * The low power link up (lplu) state is set to the power management level D3 - * and SmartSpeed is disabled when active is true, else clear lplu for D3 - * and enable Smartspeed. LPLU and Smartspeed are mutually exclusive. LPLU - * is used during Dx states where the power conservation is most important. - * During driver activity, SmartSpeed should be enabled so performance is - * maintained. - **/ -s32 e1000_set_d3_lplu_state_82580(struct e1000_hw *hw, bool active) -{ - struct e1000_phy_info *phy = &hw->phy; - s32 ret_val = E1000_SUCCESS; - u32 data; - - DEBUGFUNC("e1000_set_d3_lplu_state_82580"); - - data = E1000_READ_REG(hw, E1000_82580_PHY_POWER_MGMT); - - if (!active) { - data &= ~E1000_82580_PM_D3_LPLU; - /* - * LPLU and SmartSpeed are mutually exclusive. LPLU is used - * during Dx states where the power conservation is most - * important. During driver activity we should enable - * SmartSpeed, so performance is maintained. - */ - if (phy->smart_speed == e1000_smart_speed_on) - data |= E1000_82580_PM_SPD; - else if (phy->smart_speed == e1000_smart_speed_off) - data &= ~E1000_82580_PM_SPD; - } else if ((phy->autoneg_advertised == E1000_ALL_SPEED_DUPLEX) || - (phy->autoneg_advertised == E1000_ALL_NOT_GIG) || - (phy->autoneg_advertised == E1000_ALL_10_SPEED)) { - data |= E1000_82580_PM_D3_LPLU; - /* When LPLU is enabled, we should disable SmartSpeed */ - data &= ~E1000_82580_PM_SPD; - } - - E1000_WRITE_REG(hw, E1000_82580_PHY_POWER_MGMT, data); - return ret_val; -} - -/** - * e1000_acquire_nvm_82575 - Request for access to EEPROM - * @hw: pointer to the HW structure - * - * Acquire the necessary semaphores for exclusive access to the EEPROM. - * Set the EEPROM access request bit and wait for EEPROM access grant bit. - * Return successful if access grant bit set, else clear the request for - * EEPROM access and return -E1000_ERR_NVM (-1). - **/ -static s32 e1000_acquire_nvm_82575(struct e1000_hw *hw) -{ - s32 ret_val; - - DEBUGFUNC("e1000_acquire_nvm_82575"); - - ret_val = e1000_acquire_swfw_sync_82575(hw, E1000_SWFW_EEP_SM); - if (ret_val) - goto out; - - /* - * Check if there is some access - * error this access may hook on - */ - if (hw->mac.type == e1000_i350) { - u32 eecd = E1000_READ_REG(hw, E1000_EECD); - if (eecd & (E1000_EECD_BLOCKED | E1000_EECD_ABORT | - E1000_EECD_TIMEOUT)) { - /* Clear all access error flags */ - E1000_WRITE_REG(hw, E1000_EECD, eecd | - E1000_EECD_ERROR_CLR); - DEBUGOUT("Nvm bit banging access error detected and cleared.\n"); - } - } - if (hw->mac.type == e1000_82580) { - u32 eecd = E1000_READ_REG(hw, E1000_EECD); - if (eecd & E1000_EECD_BLOCKED) { - /* Clear access error flag */ - E1000_WRITE_REG(hw, E1000_EECD, eecd | - E1000_EECD_BLOCKED); - DEBUGOUT("Nvm bit banging access error detected and cleared.\n"); - } - } - - - ret_val = e1000_acquire_nvm_generic(hw); - if (ret_val) - e1000_release_swfw_sync_82575(hw, E1000_SWFW_EEP_SM); - -out: - return ret_val; -} - -/** - * e1000_release_nvm_82575 - Release exclusive access to EEPROM - * @hw: pointer to the HW structure - * - * Stop any current commands to the EEPROM and clear the EEPROM request bit, - * then release the semaphores acquired. - **/ -static void e1000_release_nvm_82575(struct e1000_hw *hw) -{ - DEBUGFUNC("e1000_release_nvm_82575"); - - e1000_release_nvm_generic(hw); - - e1000_release_swfw_sync_82575(hw, E1000_SWFW_EEP_SM); -} - -/** - * e1000_acquire_swfw_sync_82575 - Acquire SW/FW semaphore - * @hw: pointer to the HW structure - * @mask: specifies which semaphore to acquire - * - * Acquire the SW/FW semaphore to access the PHY or NVM. The mask - * will also specify which port we're acquiring the lock for. - **/ -static s32 e1000_acquire_swfw_sync_82575(struct e1000_hw *hw, u16 mask) -{ - u32 swfw_sync; - u32 swmask = mask; - u32 fwmask = mask << 16; - s32 ret_val = E1000_SUCCESS; - s32 i = 0, timeout = 200; /* FIXME: find real value to use here */ - - DEBUGFUNC("e1000_acquire_swfw_sync_82575"); - - while (i < timeout) { - if (e1000_get_hw_semaphore_generic(hw)) { - ret_val = -E1000_ERR_SWFW_SYNC; - goto out; - } - - swfw_sync = E1000_READ_REG(hw, E1000_SW_FW_SYNC); - if (!(swfw_sync & (fwmask | swmask))) - break; - - /* - * Firmware currently using resource (fwmask) - * or other software thread using resource (swmask) - */ - e1000_put_hw_semaphore_generic(hw); - msec_delay_irq(5); - i++; - } - - if (i == timeout) { - DEBUGOUT("Driver can't access resource, SW_FW_SYNC timeout.\n"); - ret_val = -E1000_ERR_SWFW_SYNC; - goto out; - } - - swfw_sync |= swmask; - E1000_WRITE_REG(hw, E1000_SW_FW_SYNC, swfw_sync); - - e1000_put_hw_semaphore_generic(hw); - -out: - return ret_val; -} - -/** - * e1000_release_swfw_sync_82575 - Release SW/FW semaphore - * @hw: pointer to the HW structure - * @mask: specifies which semaphore to acquire - * - * Release the SW/FW semaphore used to access the PHY or NVM. The mask - * will also specify which port we're releasing the lock for. - **/ -static void e1000_release_swfw_sync_82575(struct e1000_hw *hw, u16 mask) -{ - u32 swfw_sync; - - DEBUGFUNC("e1000_release_swfw_sync_82575"); - - while (e1000_get_hw_semaphore_generic(hw) != E1000_SUCCESS) - ; /* Empty */ - - swfw_sync = E1000_READ_REG(hw, E1000_SW_FW_SYNC); - swfw_sync &= ~mask; - E1000_WRITE_REG(hw, E1000_SW_FW_SYNC, swfw_sync); - - e1000_put_hw_semaphore_generic(hw); -} - -/** - * e1000_get_cfg_done_82575 - Read config done bit - * @hw: pointer to the HW structure - * - * Read the management control register for the config done bit for - * completion status. NOTE: silicon which is EEPROM-less will fail trying - * to read the config done bit, so an error is *ONLY* logged and returns - * E1000_SUCCESS. If we were to return with error, EEPROM-less silicon - * would not be able to be reset or change link. - **/ -static s32 e1000_get_cfg_done_82575(struct e1000_hw *hw) -{ - s32 timeout = PHY_CFG_TIMEOUT; - s32 ret_val = E1000_SUCCESS; - u32 mask = E1000_NVM_CFG_DONE_PORT_0; - - DEBUGFUNC("e1000_get_cfg_done_82575"); - - if (hw->bus.func == E1000_FUNC_1) - mask = E1000_NVM_CFG_DONE_PORT_1; - else if (hw->bus.func == E1000_FUNC_2) - mask = E1000_NVM_CFG_DONE_PORT_2; - else if (hw->bus.func == E1000_FUNC_3) - mask = E1000_NVM_CFG_DONE_PORT_3; - while (timeout) { - if (E1000_READ_REG(hw, E1000_EEMNGCTL) & mask) - break; - msec_delay(1); - timeout--; - } - if (!timeout) - DEBUGOUT("MNG configuration cycle has not completed.\n"); - - /* If EEPROM is not marked present, init the PHY manually */ - if (!(E1000_READ_REG(hw, E1000_EECD) & E1000_EECD_PRES) && - (hw->phy.type == e1000_phy_igp_3)) - e1000_phy_init_script_igp3(hw); - - return ret_val; -} - -/** - * e1000_get_link_up_info_82575 - Get link speed/duplex info - * @hw: pointer to the HW structure - * @speed: stores the current speed - * @duplex: stores the current duplex - * - * This is a wrapper function, if using the serial gigabit media independent - * interface, use PCS to retrieve the link speed and duplex information. - * Otherwise, use the generic function to get the link speed and duplex info. - **/ -static s32 e1000_get_link_up_info_82575(struct e1000_hw *hw, u16 *speed, - u16 *duplex) -{ - s32 ret_val; - - DEBUGFUNC("e1000_get_link_up_info_82575"); - - if (hw->phy.media_type != e1000_media_type_copper) - ret_val = e1000_get_pcs_speed_and_duplex_82575(hw, speed, - duplex); - else - ret_val = e1000_get_speed_and_duplex_copper_generic(hw, speed, - duplex); - - return ret_val; -} - -/** - * e1000_check_for_link_82575 - Check for link - * @hw: pointer to the HW structure - * - * If sgmii is enabled, then use the pcs register to determine link, otherwise - * use the generic interface for determining link. - **/ -static s32 e1000_check_for_link_82575(struct e1000_hw *hw) -{ - s32 ret_val; - u16 speed, duplex; - - DEBUGFUNC("e1000_check_for_link_82575"); - - if (hw->phy.media_type != e1000_media_type_copper) { - ret_val = e1000_get_pcs_speed_and_duplex_82575(hw, &speed, - &duplex); - /* - * Use this flag to determine if link needs to be checked or - * not. If we have link clear the flag so that we do not - * continue to check for link. - */ - hw->mac.get_link_status = !hw->mac.serdes_has_link; - - /* - * Configure Flow Control now that Auto-Neg has completed. - * First, we need to restore the desired flow control - * settings because we may have had to re-autoneg with a - * different link partner. - */ - ret_val = e1000_config_fc_after_link_up_generic(hw); - if (ret_val) - DEBUGOUT("Error configuring flow control\n"); - } else { - ret_val = e1000_check_for_copper_link_generic(hw); - } - - return ret_val; -} - -/** - * e1000_check_for_link_media_swap - Check which M88E1112 interface linked - * @hw: pointer to the HW structure - * - * Poll the M88E1112 interfaces to see which interface achieved link. - */ -static s32 e1000_check_for_link_media_swap(struct e1000_hw *hw) -{ - struct e1000_phy_info *phy = &hw->phy; - s32 ret_val; - u16 data; - u8 port = 0; - - DEBUGFUNC("e1000_check_for_link_media_swap"); - - /* Check the copper medium. */ - ret_val = phy->ops.write_reg(hw, E1000_M88E1112_PAGE_ADDR, 0); - if (ret_val) - return ret_val; - - ret_val = phy->ops.read_reg(hw, E1000_M88E1112_STATUS, &data); - if (ret_val) - return ret_val; - - if (data & E1000_M88E1112_STATUS_LINK) - port = E1000_MEDIA_PORT_COPPER; - - /* Check the other medium. */ - ret_val = phy->ops.write_reg(hw, E1000_M88E1112_PAGE_ADDR, 1); - if (ret_val) - return ret_val; - - ret_val = phy->ops.read_reg(hw, E1000_M88E1112_STATUS, &data); - if (ret_val) - return ret_val; - - if (data & E1000_M88E1112_STATUS_LINK) - port = E1000_MEDIA_PORT_OTHER; - - /* Determine if a swap needs to happen. */ - if (port && (hw->dev_spec._82575.media_port != port)) { - hw->dev_spec._82575.media_port = port; - hw->dev_spec._82575.media_changed = true; - } else { - ret_val = e1000_check_for_link_82575(hw); - } - - return E1000_SUCCESS; -} - -/** - * e1000_power_up_serdes_link_82575 - Power up the serdes link after shutdown - * @hw: pointer to the HW structure - **/ -static void e1000_power_up_serdes_link_82575(struct e1000_hw *hw) -{ - u32 reg; - - DEBUGFUNC("e1000_power_up_serdes_link_82575"); - - if ((hw->phy.media_type != e1000_media_type_internal_serdes) && - !e1000_sgmii_active_82575(hw)) - return; - - /* Enable PCS to turn on link */ - reg = E1000_READ_REG(hw, E1000_PCS_CFG0); - reg |= E1000_PCS_CFG_PCS_EN; - E1000_WRITE_REG(hw, E1000_PCS_CFG0, reg); - - /* Power up the laser */ - reg = E1000_READ_REG(hw, E1000_CTRL_EXT); - reg &= ~E1000_CTRL_EXT_SDP3_DATA; - E1000_WRITE_REG(hw, E1000_CTRL_EXT, reg); - - /* flush the write to verify completion */ - E1000_WRITE_FLUSH(hw); - msec_delay(1); -} - -/** - * e1000_get_pcs_speed_and_duplex_82575 - Retrieve current speed/duplex - * @hw: pointer to the HW structure - * @speed: stores the current speed - * @duplex: stores the current duplex - * - * Using the physical coding sub-layer (PCS), retrieve the current speed and - * duplex, then store the values in the pointers provided. - **/ -static s32 e1000_get_pcs_speed_and_duplex_82575(struct e1000_hw *hw, - u16 *speed, u16 *duplex) -{ - struct e1000_mac_info *mac = &hw->mac; - u32 pcs; - u32 status; - - DEBUGFUNC("e1000_get_pcs_speed_and_duplex_82575"); - - /* - * Read the PCS Status register for link state. For non-copper mode, - * the status register is not accurate. The PCS status register is - * used instead. - */ - pcs = E1000_READ_REG(hw, E1000_PCS_LSTAT); - - /* - * The link up bit determines when link is up on autoneg. - */ - if (pcs & E1000_PCS_LSTS_LINK_OK) { - mac->serdes_has_link = true; - - /* Detect and store PCS speed */ - if (pcs & E1000_PCS_LSTS_SPEED_1000) - *speed = SPEED_1000; - else if (pcs & E1000_PCS_LSTS_SPEED_100) - *speed = SPEED_100; - else - *speed = SPEED_10; - - /* Detect and store PCS duplex */ - if (pcs & E1000_PCS_LSTS_DUPLEX_FULL) - *duplex = FULL_DUPLEX; - else - *duplex = HALF_DUPLEX; - - /* Check if it is an I354 2.5Gb backplane connection. */ - if (mac->type == e1000_i354) { - status = E1000_READ_REG(hw, E1000_STATUS); - if ((status & E1000_STATUS_2P5_SKU) && - !(status & E1000_STATUS_2P5_SKU_OVER)) { - *speed = SPEED_2500; - *duplex = FULL_DUPLEX; - DEBUGOUT("2500 Mbs, "); - DEBUGOUT("Full Duplex\n"); - } - } - - } else { - mac->serdes_has_link = false; - *speed = 0; - *duplex = 0; - } - - return E1000_SUCCESS; -} - -/** - * e1000_shutdown_serdes_link_82575 - Remove link during power down - * @hw: pointer to the HW structure - * - * In the case of serdes shut down sfp and PCS on driver unload - * when management pass thru is not enabled. - **/ -void e1000_shutdown_serdes_link_82575(struct e1000_hw *hw) -{ - u32 reg; - - DEBUGFUNC("e1000_shutdown_serdes_link_82575"); - - if ((hw->phy.media_type != e1000_media_type_internal_serdes) && - !e1000_sgmii_active_82575(hw)) - return; - - if (!e1000_enable_mng_pass_thru(hw)) { - /* Disable PCS to turn off link */ - reg = E1000_READ_REG(hw, E1000_PCS_CFG0); - reg &= ~E1000_PCS_CFG_PCS_EN; - E1000_WRITE_REG(hw, E1000_PCS_CFG0, reg); - - /* shutdown the laser */ - reg = E1000_READ_REG(hw, E1000_CTRL_EXT); - reg |= E1000_CTRL_EXT_SDP3_DATA; - E1000_WRITE_REG(hw, E1000_CTRL_EXT, reg); - - /* flush the write to verify completion */ - E1000_WRITE_FLUSH(hw); - msec_delay(1); - } - - return; -} - -/** - * e1000_reset_hw_82575 - Reset hardware - * @hw: pointer to the HW structure - * - * This resets the hardware into a known state. - **/ -static s32 e1000_reset_hw_82575(struct e1000_hw *hw) -{ - u32 ctrl; - s32 ret_val; - - DEBUGFUNC("e1000_reset_hw_82575"); - - /* - * Prevent the PCI-E bus from sticking if there is no TLP connection - * on the last TLP read/write transaction when MAC is reset. - */ - ret_val = e1000_disable_pcie_master_generic(hw); - if (ret_val) - DEBUGOUT("PCI-E Master disable polling has failed.\n"); - - /* set the completion timeout for interface */ - ret_val = e1000_set_pcie_completion_timeout(hw); - if (ret_val) - DEBUGOUT("PCI-E Set completion timeout has failed.\n"); - - DEBUGOUT("Masking off all interrupts\n"); - E1000_WRITE_REG(hw, E1000_IMC, 0xffffffff); - - E1000_WRITE_REG(hw, E1000_RCTL, 0); - E1000_WRITE_REG(hw, E1000_TCTL, E1000_TCTL_PSP); - E1000_WRITE_FLUSH(hw); - - msec_delay(10); - - ctrl = E1000_READ_REG(hw, E1000_CTRL); - - DEBUGOUT("Issuing a global reset to MAC\n"); - E1000_WRITE_REG(hw, E1000_CTRL, ctrl | E1000_CTRL_RST); - - ret_val = e1000_get_auto_rd_done_generic(hw); - if (ret_val) { - /* - * When auto config read does not complete, do not - * return with an error. This can happen in situations - * where there is no eeprom and prevents getting link. - */ - DEBUGOUT("Auto Read Done did not complete\n"); - } - - /* If EEPROM is not present, run manual init scripts */ - if (!(E1000_READ_REG(hw, E1000_EECD) & E1000_EECD_PRES)) - e1000_reset_init_script_82575(hw); - - /* Clear any pending interrupt events. */ - E1000_WRITE_REG(hw, E1000_IMC, 0xffffffff); - E1000_READ_REG(hw, E1000_ICR); - - /* Install any alternate MAC address into RAR0 */ - ret_val = e1000_check_alt_mac_addr_generic(hw); - - return ret_val; -} - -/** - * e1000_init_hw_82575 - Initialize hardware - * @hw: pointer to the HW structure - * - * This inits the hardware readying it for operation. - **/ -static s32 e1000_init_hw_82575(struct e1000_hw *hw) -{ - struct e1000_mac_info *mac = &hw->mac; - s32 ret_val; - u16 i, rar_count = mac->rar_entry_count; - - DEBUGFUNC("e1000_init_hw_82575"); - - /* Initialize identification LED */ - ret_val = mac->ops.id_led_init(hw); - if (ret_val) { - DEBUGOUT("Error initializing identification LED\n"); - /* This is not fatal and we should not stop init due to this */ - } - - /* Disabling VLAN filtering */ - DEBUGOUT("Initializing the IEEE VLAN\n"); - mac->ops.clear_vfta(hw); - - /* Setup the receive address */ - e1000_init_rx_addrs_generic(hw, rar_count); - - /* Zero out the Multicast HASH table */ - DEBUGOUT("Zeroing the MTA\n"); - for (i = 0; i < mac->mta_reg_count; i++) - E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0); - - /* Zero out the Unicast HASH table */ - DEBUGOUT("Zeroing the UTA\n"); - for (i = 0; i < mac->uta_reg_count; i++) - E1000_WRITE_REG_ARRAY(hw, E1000_UTA, i, 0); - - /* Setup link and flow control */ - ret_val = mac->ops.setup_link(hw); - - /* Set the default MTU size */ - hw->dev_spec._82575.mtu = 1500; - - /* - * Clear all of the statistics registers (clear on read). It is - * important that we do this after we have tried to establish link - * because the symbol error count will increment wildly if there - * is no link. - */ - e1000_clear_hw_cntrs_82575(hw); - - return ret_val; -} - -/** - * e1000_setup_copper_link_82575 - Configure copper link settings - * @hw: pointer to the HW structure - * - * Configures the link for auto-neg or forced speed and duplex. Then we check - * for link, once link is established calls to configure collision distance - * and flow control are called. - **/ -static s32 e1000_setup_copper_link_82575(struct e1000_hw *hw) -{ - u32 ctrl; - s32 ret_val; - u32 phpm_reg; - - DEBUGFUNC("e1000_setup_copper_link_82575"); - - ctrl = E1000_READ_REG(hw, E1000_CTRL); - ctrl |= E1000_CTRL_SLU; - ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX); - E1000_WRITE_REG(hw, E1000_CTRL, ctrl); - - /* Clear Go Link Disconnect bit on supported devices */ - switch (hw->mac.type) { - case e1000_82580: - case e1000_i350: - case e1000_i210: - case e1000_i211: - phpm_reg = E1000_READ_REG(hw, E1000_82580_PHY_POWER_MGMT); - phpm_reg &= ~E1000_82580_PM_GO_LINKD; - E1000_WRITE_REG(hw, E1000_82580_PHY_POWER_MGMT, phpm_reg); - break; - default: - break; - } - - ret_val = e1000_setup_serdes_link_82575(hw); - if (ret_val) - goto out; - - if (e1000_sgmii_active_82575(hw) && !hw->phy.reset_disable) { - /* allow time for SFP cage time to power up phy */ - msec_delay(300); - - ret_val = hw->phy.ops.reset(hw); - if (ret_val) { - DEBUGOUT("Error resetting the PHY.\n"); - goto out; - } - } - switch (hw->phy.type) { - case e1000_phy_i210: - case e1000_phy_m88: - switch (hw->phy.id) { - case I347AT4_E_PHY_ID: - case M88E1112_E_PHY_ID: - case M88E1340M_E_PHY_ID: - case M88E1543_E_PHY_ID: - case I210_I_PHY_ID: - ret_val = e1000_copper_link_setup_m88_gen2(hw); - break; - default: - ret_val = e1000_copper_link_setup_m88(hw); - break; - } - break; - case e1000_phy_igp_3: - ret_val = e1000_copper_link_setup_igp(hw); - break; - case e1000_phy_82580: - ret_val = e1000_copper_link_setup_82577(hw); - break; - default: - ret_val = -E1000_ERR_PHY; - break; - } - - if (ret_val) - goto out; - - ret_val = e1000_setup_copper_link_generic(hw); -out: - return ret_val; -} - -/** - * e1000_setup_serdes_link_82575 - Setup link for serdes - * @hw: pointer to the HW structure - * - * Configure the physical coding sub-layer (PCS) link. The PCS link is - * used on copper connections where the serialized gigabit media independent - * interface (sgmii), or serdes fiber is being used. Configures the link - * for auto-negotiation or forces speed/duplex. - **/ -static s32 e1000_setup_serdes_link_82575(struct e1000_hw *hw) -{ - u32 ctrl_ext, ctrl_reg, reg, anadv_reg; - bool pcs_autoneg; - s32 ret_val = E1000_SUCCESS; - u16 data; - - DEBUGFUNC("e1000_setup_serdes_link_82575"); - - if ((hw->phy.media_type != e1000_media_type_internal_serdes) && - !e1000_sgmii_active_82575(hw)) - return ret_val; - - /* - * On the 82575, SerDes loopback mode persists until it is - * explicitly turned off or a power cycle is performed. A read to - * the register does not indicate its status. Therefore, we ensure - * loopback mode is disabled during initialization. - */ - E1000_WRITE_REG(hw, E1000_SCTL, E1000_SCTL_DISABLE_SERDES_LOOPBACK); - - /* power on the sfp cage if present */ - ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); - ctrl_ext &= ~E1000_CTRL_EXT_SDP3_DATA; - E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext); - - ctrl_reg = E1000_READ_REG(hw, E1000_CTRL); - ctrl_reg |= E1000_CTRL_SLU; - - /* set both sw defined pins on 82575/82576*/ - if (hw->mac.type == e1000_82575 || hw->mac.type == e1000_82576) - ctrl_reg |= E1000_CTRL_SWDPIN0 | E1000_CTRL_SWDPIN1; - - reg = E1000_READ_REG(hw, E1000_PCS_LCTL); - - /* default pcs_autoneg to the same setting as mac autoneg */ - pcs_autoneg = hw->mac.autoneg; - - switch (ctrl_ext & E1000_CTRL_EXT_LINK_MODE_MASK) { - case E1000_CTRL_EXT_LINK_MODE_SGMII: - /* sgmii mode lets the phy handle forcing speed/duplex */ - pcs_autoneg = true; - /* autoneg time out should be disabled for SGMII mode */ - reg &= ~(E1000_PCS_LCTL_AN_TIMEOUT); - break; - case E1000_CTRL_EXT_LINK_MODE_1000BASE_KX: - /* disable PCS autoneg and support parallel detect only */ - pcs_autoneg = false; - /* fall through to default case */ - default: - if (hw->mac.type == e1000_82575 || - hw->mac.type == e1000_82576) { - ret_val = hw->nvm.ops.read(hw, NVM_COMPAT, 1, &data); - if (ret_val) { - DEBUGOUT("NVM Read Error\n"); - return ret_val; - } - - if (data & E1000_EEPROM_PCS_AUTONEG_DISABLE_BIT) - pcs_autoneg = false; - } - - /* - * non-SGMII modes only supports a speed of 1000/Full for the - * link so it is best to just force the MAC and let the pcs - * link either autoneg or be forced to 1000/Full - */ - ctrl_reg |= E1000_CTRL_SPD_1000 | E1000_CTRL_FRCSPD | - E1000_CTRL_FD | E1000_CTRL_FRCDPX; - - /* set speed of 1000/Full if speed/duplex is forced */ - reg |= E1000_PCS_LCTL_FSV_1000 | E1000_PCS_LCTL_FDV_FULL; - break; - } - - E1000_WRITE_REG(hw, E1000_CTRL, ctrl_reg); - - /* - * New SerDes mode allows for forcing speed or autonegotiating speed - * at 1gb. Autoneg should be default set by most drivers. This is the - * mode that will be compatible with older link partners and switches. - * However, both are supported by the hardware and some drivers/tools. - */ - reg &= ~(E1000_PCS_LCTL_AN_ENABLE | E1000_PCS_LCTL_FLV_LINK_UP | - E1000_PCS_LCTL_FSD | E1000_PCS_LCTL_FORCE_LINK); - - if (pcs_autoneg) { - /* Set PCS register for autoneg */ - reg |= E1000_PCS_LCTL_AN_ENABLE | /* Enable Autoneg */ - E1000_PCS_LCTL_AN_RESTART; /* Restart autoneg */ - - /* Disable force flow control for autoneg */ - reg &= ~E1000_PCS_LCTL_FORCE_FCTRL; - - /* Configure flow control advertisement for autoneg */ - anadv_reg = E1000_READ_REG(hw, E1000_PCS_ANADV); - anadv_reg &= ~(E1000_TXCW_ASM_DIR | E1000_TXCW_PAUSE); - - switch (hw->fc.requested_mode) { - case e1000_fc_full: - case e1000_fc_rx_pause: - anadv_reg |= E1000_TXCW_ASM_DIR; - anadv_reg |= E1000_TXCW_PAUSE; - break; - case e1000_fc_tx_pause: - anadv_reg |= E1000_TXCW_ASM_DIR; - break; - default: - break; - } - - E1000_WRITE_REG(hw, E1000_PCS_ANADV, anadv_reg); - - DEBUGOUT1("Configuring Autoneg:PCS_LCTL=0x%08X\n", reg); - } else { - /* Set PCS register for forced link */ - reg |= E1000_PCS_LCTL_FSD; /* Force Speed */ - - /* Force flow control for forced link */ - reg |= E1000_PCS_LCTL_FORCE_FCTRL; - - DEBUGOUT1("Configuring Forced Link:PCS_LCTL=0x%08X\n", reg); - } - - E1000_WRITE_REG(hw, E1000_PCS_LCTL, reg); - - if (!pcs_autoneg && !e1000_sgmii_active_82575(hw)) - e1000_force_mac_fc_generic(hw); - - return ret_val; -} - -/** - * e1000_get_media_type_82575 - derives current media type. - * @hw: pointer to the HW structure - * - * The media type is chosen reflecting few settings. - * The following are taken into account: - * - link mode set in the current port Init Control Word #3 - * - current link mode settings in CSR register - * - MDIO vs. I2C PHY control interface chosen - * - SFP module media type - **/ -static s32 e1000_get_media_type_82575(struct e1000_hw *hw) -{ - struct e1000_dev_spec_82575 *dev_spec = &hw->dev_spec._82575; - s32 ret_val = E1000_SUCCESS; - u32 ctrl_ext = 0; - u32 link_mode = 0; - - /* Set internal phy as default */ - dev_spec->sgmii_active = false; - dev_spec->module_plugged = false; - - /* Get CSR setting */ - ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); - - /* extract link mode setting */ - link_mode = ctrl_ext & E1000_CTRL_EXT_LINK_MODE_MASK; - - switch (link_mode) { - case E1000_CTRL_EXT_LINK_MODE_1000BASE_KX: - hw->phy.media_type = e1000_media_type_internal_serdes; - break; - case E1000_CTRL_EXT_LINK_MODE_GMII: - hw->phy.media_type = e1000_media_type_copper; - break; - case E1000_CTRL_EXT_LINK_MODE_SGMII: - /* Get phy control interface type set (MDIO vs. I2C)*/ - if (e1000_sgmii_uses_mdio_82575(hw)) { - hw->phy.media_type = e1000_media_type_copper; - dev_spec->sgmii_active = true; - break; - } - /* fall through for I2C based SGMII */ - case E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES: - /* read media type from SFP EEPROM */ - ret_val = e1000_set_sfp_media_type_82575(hw); - if ((ret_val != E1000_SUCCESS) || - (hw->phy.media_type == e1000_media_type_unknown)) { - /* - * If media type was not identified then return media - * type defined by the CTRL_EXT settings. - */ - hw->phy.media_type = e1000_media_type_internal_serdes; - - if (link_mode == E1000_CTRL_EXT_LINK_MODE_SGMII) { - hw->phy.media_type = e1000_media_type_copper; - dev_spec->sgmii_active = true; - } - - break; - } - - /* do not change link mode for 100BaseFX */ - if (dev_spec->eth_flags.e100_base_fx) - break; - - /* change current link mode setting */ - ctrl_ext &= ~E1000_CTRL_EXT_LINK_MODE_MASK; - - if (hw->phy.media_type == e1000_media_type_copper) - ctrl_ext |= E1000_CTRL_EXT_LINK_MODE_SGMII; - else - ctrl_ext |= E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES; - - E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext); - - break; - } - - return ret_val; -} - -/** - * e1000_set_sfp_media_type_82575 - derives SFP module media type. - * @hw: pointer to the HW structure - * - * The media type is chosen based on SFP module. - * compatibility flags retrieved from SFP ID EEPROM. - **/ -static s32 e1000_set_sfp_media_type_82575(struct e1000_hw *hw) -{ - s32 ret_val = E1000_ERR_CONFIG; - u32 ctrl_ext = 0; - struct e1000_dev_spec_82575 *dev_spec = &hw->dev_spec._82575; - struct sfp_e1000_flags *eth_flags = &dev_spec->eth_flags; - u8 tranceiver_type = 0; - s32 timeout = 3; - - /* Turn I2C interface ON and power on sfp cage */ - ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); - ctrl_ext &= ~E1000_CTRL_EXT_SDP3_DATA; - E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext | E1000_CTRL_I2C_ENA); - - E1000_WRITE_FLUSH(hw); - - /* Read SFP module data */ - while (timeout) { - ret_val = e1000_read_sfp_data_byte(hw, - E1000_I2CCMD_SFP_DATA_ADDR(E1000_SFF_IDENTIFIER_OFFSET), - &tranceiver_type); - if (ret_val == E1000_SUCCESS) - break; - msec_delay(100); - timeout--; - } - if (ret_val != E1000_SUCCESS) - goto out; - - ret_val = e1000_read_sfp_data_byte(hw, - E1000_I2CCMD_SFP_DATA_ADDR(E1000_SFF_ETH_FLAGS_OFFSET), - (u8 *)eth_flags); - if (ret_val != E1000_SUCCESS) - goto out; - - /* Check if there is some SFP module plugged and powered */ - if ((tranceiver_type == E1000_SFF_IDENTIFIER_SFP) || - (tranceiver_type == E1000_SFF_IDENTIFIER_SFF)) { - dev_spec->module_plugged = true; - if (eth_flags->e1000_base_lx || eth_flags->e1000_base_sx) { - hw->phy.media_type = e1000_media_type_internal_serdes; - } else if (eth_flags->e100_base_fx) { - dev_spec->sgmii_active = true; - hw->phy.media_type = e1000_media_type_internal_serdes; - } else if (eth_flags->e1000_base_t) { - dev_spec->sgmii_active = true; - hw->phy.media_type = e1000_media_type_copper; - } else { - hw->phy.media_type = e1000_media_type_unknown; - DEBUGOUT("PHY module has not been recognized\n"); - goto out; - } - } else { - hw->phy.media_type = e1000_media_type_unknown; - } - ret_val = E1000_SUCCESS; -out: - /* Restore I2C interface setting */ - E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext); - return ret_val; -} - -/** - * e1000_valid_led_default_82575 - Verify a valid default LED config - * @hw: pointer to the HW structure - * @data: pointer to the NVM (EEPROM) - * - * Read the EEPROM for the current default LED configuration. If the - * LED configuration is not valid, set to a valid LED configuration. - **/ -static s32 e1000_valid_led_default_82575(struct e1000_hw *hw, u16 *data) -{ - s32 ret_val; - - DEBUGFUNC("e1000_valid_led_default_82575"); - - ret_val = hw->nvm.ops.read(hw, NVM_ID_LED_SETTINGS, 1, data); - if (ret_val) { - DEBUGOUT("NVM Read Error\n"); - goto out; - } - - if (*data == ID_LED_RESERVED_0000 || *data == ID_LED_RESERVED_FFFF) { - switch (hw->phy.media_type) { - case e1000_media_type_internal_serdes: - *data = ID_LED_DEFAULT_82575_SERDES; - break; - case e1000_media_type_copper: - default: - *data = ID_LED_DEFAULT; - break; - } - } -out: - return ret_val; -} - -/** - * e1000_sgmii_active_82575 - Return sgmii state - * @hw: pointer to the HW structure - * - * 82575 silicon has a serialized gigabit media independent interface (sgmii) - * which can be enabled for use in the embedded applications. Simply - * return the current state of the sgmii interface. - **/ -static bool e1000_sgmii_active_82575(struct e1000_hw *hw) -{ - struct e1000_dev_spec_82575 *dev_spec = &hw->dev_spec._82575; - return dev_spec->sgmii_active; -} - -/** - * e1000_reset_init_script_82575 - Inits HW defaults after reset - * @hw: pointer to the HW structure - * - * Inits recommended HW defaults after a reset when there is no EEPROM - * detected. This is only for the 82575. - **/ -static s32 e1000_reset_init_script_82575(struct e1000_hw *hw) -{ - DEBUGFUNC("e1000_reset_init_script_82575"); - - if (hw->mac.type == e1000_82575) { - DEBUGOUT("Running reset init script for 82575\n"); - /* SerDes configuration via SERDESCTRL */ - e1000_write_8bit_ctrl_reg_generic(hw, E1000_SCTL, 0x00, 0x0C); - e1000_write_8bit_ctrl_reg_generic(hw, E1000_SCTL, 0x01, 0x78); - e1000_write_8bit_ctrl_reg_generic(hw, E1000_SCTL, 0x1B, 0x23); - e1000_write_8bit_ctrl_reg_generic(hw, E1000_SCTL, 0x23, 0x15); - - /* CCM configuration via CCMCTL register */ - e1000_write_8bit_ctrl_reg_generic(hw, E1000_CCMCTL, 0x14, 0x00); - e1000_write_8bit_ctrl_reg_generic(hw, E1000_CCMCTL, 0x10, 0x00); - - /* PCIe lanes configuration */ - e1000_write_8bit_ctrl_reg_generic(hw, E1000_GIOCTL, 0x00, 0xEC); - e1000_write_8bit_ctrl_reg_generic(hw, E1000_GIOCTL, 0x61, 0xDF); - e1000_write_8bit_ctrl_reg_generic(hw, E1000_GIOCTL, 0x34, 0x05); - e1000_write_8bit_ctrl_reg_generic(hw, E1000_GIOCTL, 0x2F, 0x81); - - /* PCIe PLL Configuration */ - e1000_write_8bit_ctrl_reg_generic(hw, E1000_SCCTL, 0x02, 0x47); - e1000_write_8bit_ctrl_reg_generic(hw, E1000_SCCTL, 0x14, 0x00); - e1000_write_8bit_ctrl_reg_generic(hw, E1000_SCCTL, 0x10, 0x00); - } - - return E1000_SUCCESS; -} - -/** - * e1000_read_mac_addr_82575 - Read device MAC address - * @hw: pointer to the HW structure - **/ -static s32 e1000_read_mac_addr_82575(struct e1000_hw *hw) -{ - s32 ret_val = E1000_SUCCESS; - - DEBUGFUNC("e1000_read_mac_addr_82575"); - - /* - * If there's an alternate MAC address place it in RAR0 - * so that it will override the Si installed default perm - * address. - */ - ret_val = e1000_check_alt_mac_addr_generic(hw); - if (ret_val) - goto out; - - ret_val = e1000_read_mac_addr_generic(hw); - -out: - return ret_val; -} - -/** - * e1000_config_collision_dist_82575 - Configure collision distance - * @hw: pointer to the HW structure - * - * Configures the collision distance to the default value and is used - * during link setup. - **/ -static void e1000_config_collision_dist_82575(struct e1000_hw *hw) -{ - u32 tctl_ext; - - DEBUGFUNC("e1000_config_collision_dist_82575"); - - tctl_ext = E1000_READ_REG(hw, E1000_TCTL_EXT); - - tctl_ext &= ~E1000_TCTL_EXT_COLD; - tctl_ext |= E1000_COLLISION_DISTANCE << E1000_TCTL_EXT_COLD_SHIFT; - - E1000_WRITE_REG(hw, E1000_TCTL_EXT, tctl_ext); - E1000_WRITE_FLUSH(hw); -} - -/** - * e1000_power_down_phy_copper_82575 - Remove link during PHY power down - * @hw: pointer to the HW structure - * - * In the case of a PHY power down to save power, or to turn off link during a - * driver unload, or wake on lan is not enabled, remove the link. - **/ -static void e1000_power_down_phy_copper_82575(struct e1000_hw *hw) -{ - struct e1000_phy_info *phy = &hw->phy; - - if (!(phy->ops.check_reset_block)) - return; - - /* If the management interface is not enabled, then power down */ - if (!(e1000_enable_mng_pass_thru(hw) || phy->ops.check_reset_block(hw))) - e1000_power_down_phy_copper(hw); - - return; -} - -/** - * e1000_clear_hw_cntrs_82575 - Clear device specific hardware counters - * @hw: pointer to the HW structure - * - * Clears the hardware counters by reading the counter registers. - **/ -static void e1000_clear_hw_cntrs_82575(struct e1000_hw *hw) -{ - DEBUGFUNC("e1000_clear_hw_cntrs_82575"); - - e1000_clear_hw_cntrs_base_generic(hw); - - E1000_READ_REG(hw, E1000_PRC64); - E1000_READ_REG(hw, E1000_PRC127); - E1000_READ_REG(hw, E1000_PRC255); - E1000_READ_REG(hw, E1000_PRC511); - E1000_READ_REG(hw, E1000_PRC1023); - E1000_READ_REG(hw, E1000_PRC1522); - E1000_READ_REG(hw, E1000_PTC64); - E1000_READ_REG(hw, E1000_PTC127); - E1000_READ_REG(hw, E1000_PTC255); - E1000_READ_REG(hw, E1000_PTC511); - E1000_READ_REG(hw, E1000_PTC1023); - E1000_READ_REG(hw, E1000_PTC1522); - - E1000_READ_REG(hw, E1000_ALGNERRC); - E1000_READ_REG(hw, E1000_RXERRC); - E1000_READ_REG(hw, E1000_TNCRS); - E1000_READ_REG(hw, E1000_CEXTERR); - E1000_READ_REG(hw, E1000_TSCTC); - E1000_READ_REG(hw, E1000_TSCTFC); - - E1000_READ_REG(hw, E1000_MGTPRC); - E1000_READ_REG(hw, E1000_MGTPDC); - E1000_READ_REG(hw, E1000_MGTPTC); - - E1000_READ_REG(hw, E1000_IAC); - E1000_READ_REG(hw, E1000_ICRXOC); - - E1000_READ_REG(hw, E1000_ICRXPTC); - E1000_READ_REG(hw, E1000_ICRXATC); - E1000_READ_REG(hw, E1000_ICTXPTC); - E1000_READ_REG(hw, E1000_ICTXATC); - E1000_READ_REG(hw, E1000_ICTXQEC); - E1000_READ_REG(hw, E1000_ICTXQMTC); - E1000_READ_REG(hw, E1000_ICRXDMTC); - - E1000_READ_REG(hw, E1000_CBTMPC); - E1000_READ_REG(hw, E1000_HTDPMC); - E1000_READ_REG(hw, E1000_CBRMPC); - E1000_READ_REG(hw, E1000_RPTHC); - E1000_READ_REG(hw, E1000_HGPTC); - E1000_READ_REG(hw, E1000_HTCBDPC); - E1000_READ_REG(hw, E1000_HGORCL); - E1000_READ_REG(hw, E1000_HGORCH); - E1000_READ_REG(hw, E1000_HGOTCL); - E1000_READ_REG(hw, E1000_HGOTCH); - E1000_READ_REG(hw, E1000_LENERRS); - - /* This register should not be read in copper configurations */ - if ((hw->phy.media_type == e1000_media_type_internal_serdes) || - e1000_sgmii_active_82575(hw)) - E1000_READ_REG(hw, E1000_SCVPC); -} - -/** - * e1000_rx_fifo_flush_82575 - Clean rx fifo after Rx enable - * @hw: pointer to the HW structure - * - * After rx enable if managability is enabled then there is likely some - * bad data at the start of the fifo and possibly in the DMA fifo. This - * function clears the fifos and flushes any packets that came in as rx was - * being enabled. - **/ -void e1000_rx_fifo_flush_82575(struct e1000_hw *hw) -{ - u32 rctl, rlpml, rxdctl[4], rfctl, temp_rctl, rx_enabled; - int i, ms_wait; - - DEBUGFUNC("e1000_rx_fifo_workaround_82575"); - if (hw->mac.type != e1000_82575 || - !(E1000_READ_REG(hw, E1000_MANC) & E1000_MANC_RCV_TCO_EN)) - return; - - /* Disable all Rx queues */ - for (i = 0; i < 4; i++) { - rxdctl[i] = E1000_READ_REG(hw, E1000_RXDCTL(i)); - E1000_WRITE_REG(hw, E1000_RXDCTL(i), - rxdctl[i] & ~E1000_RXDCTL_QUEUE_ENABLE); - } - /* Poll all queues to verify they have shut down */ - for (ms_wait = 0; ms_wait < 10; ms_wait++) { - msec_delay(1); - rx_enabled = 0; - for (i = 0; i < 4; i++) - rx_enabled |= E1000_READ_REG(hw, E1000_RXDCTL(i)); - if (!(rx_enabled & E1000_RXDCTL_QUEUE_ENABLE)) - break; - } - - if (ms_wait == 10) - DEBUGOUT("Queue disable timed out after 10ms\n"); - - /* Clear RLPML, RCTL.SBP, RFCTL.LEF, and set RCTL.LPE so that all - * incoming packets are rejected. Set enable and wait 2ms so that - * any packet that was coming in as RCTL.EN was set is flushed - */ - rfctl = E1000_READ_REG(hw, E1000_RFCTL); - E1000_WRITE_REG(hw, E1000_RFCTL, rfctl & ~E1000_RFCTL_LEF); - - rlpml = E1000_READ_REG(hw, E1000_RLPML); - E1000_WRITE_REG(hw, E1000_RLPML, 0); - - rctl = E1000_READ_REG(hw, E1000_RCTL); - temp_rctl = rctl & ~(E1000_RCTL_EN | E1000_RCTL_SBP); - temp_rctl |= E1000_RCTL_LPE; - - E1000_WRITE_REG(hw, E1000_RCTL, temp_rctl); - E1000_WRITE_REG(hw, E1000_RCTL, temp_rctl | E1000_RCTL_EN); - E1000_WRITE_FLUSH(hw); - msec_delay(2); - - /* Enable Rx queues that were previously enabled and restore our - * previous state - */ - for (i = 0; i < 4; i++) - E1000_WRITE_REG(hw, E1000_RXDCTL(i), rxdctl[i]); - E1000_WRITE_REG(hw, E1000_RCTL, rctl); - E1000_WRITE_FLUSH(hw); - - E1000_WRITE_REG(hw, E1000_RLPML, rlpml); - E1000_WRITE_REG(hw, E1000_RFCTL, rfctl); - - /* Flush receive errors generated by workaround */ - E1000_READ_REG(hw, E1000_ROC); - E1000_READ_REG(hw, E1000_RNBC); - E1000_READ_REG(hw, E1000_MPC); -} - -/** - * e1000_set_pcie_completion_timeout - set pci-e completion timeout - * @hw: pointer to the HW structure - * - * The defaults for 82575 and 82576 should be in the range of 50us to 50ms, - * however the hardware default for these parts is 500us to 1ms which is less - * than the 10ms recommended by the pci-e spec. To address this we need to - * increase the value to either 10ms to 200ms for capability version 1 config, - * or 16ms to 55ms for version 2. - **/ -static s32 e1000_set_pcie_completion_timeout(struct e1000_hw *hw) -{ - u32 gcr = E1000_READ_REG(hw, E1000_GCR); - s32 ret_val = E1000_SUCCESS; - u16 pcie_devctl2; - - /* only take action if timeout value is defaulted to 0 */ - if (gcr & E1000_GCR_CMPL_TMOUT_MASK) - goto out; - - /* - * if capababilities version is type 1 we can write the - * timeout of 10ms to 200ms through the GCR register - */ - if (!(gcr & E1000_GCR_CAP_VER2)) { - gcr |= E1000_GCR_CMPL_TMOUT_10ms; - goto out; - } - - /* - * for version 2 capabilities we need to write the config space - * directly in order to set the completion timeout value for - * 16ms to 55ms - */ - ret_val = e1000_read_pcie_cap_reg(hw, PCIE_DEVICE_CONTROL2, - &pcie_devctl2); - if (ret_val) - goto out; - - pcie_devctl2 |= PCIE_DEVICE_CONTROL2_16ms; - - ret_val = e1000_write_pcie_cap_reg(hw, PCIE_DEVICE_CONTROL2, - &pcie_devctl2); -out: - /* disable completion timeout resend */ - gcr &= ~E1000_GCR_CMPL_TMOUT_RESEND; - - E1000_WRITE_REG(hw, E1000_GCR, gcr); - return ret_val; -} - -/** - * e1000_vmdq_set_anti_spoofing_pf - enable or disable anti-spoofing - * @hw: pointer to the hardware struct - * @enable: state to enter, either enabled or disabled - * @pf: Physical Function pool - do not set anti-spoofing for the PF - * - * enables/disables L2 switch anti-spoofing functionality. - **/ -void e1000_vmdq_set_anti_spoofing_pf(struct e1000_hw *hw, bool enable, int pf) -{ - u32 reg_val, reg_offset; - - switch (hw->mac.type) { - case e1000_82576: - reg_offset = E1000_DTXSWC; - break; - case e1000_i350: - case e1000_i354: - reg_offset = E1000_TXSWC; - break; - default: - return; - } - - reg_val = E1000_READ_REG(hw, reg_offset); - if (enable) { - reg_val |= (E1000_DTXSWC_MAC_SPOOF_MASK | - E1000_DTXSWC_VLAN_SPOOF_MASK); - /* The PF can spoof - it has to in order to - * support emulation mode NICs - */ - reg_val ^= (1 << pf | 1 << (pf + MAX_NUM_VFS)); - } else { - reg_val &= ~(E1000_DTXSWC_MAC_SPOOF_MASK | - E1000_DTXSWC_VLAN_SPOOF_MASK); - } - E1000_WRITE_REG(hw, reg_offset, reg_val); -} - -/** - * e1000_vmdq_set_loopback_pf - enable or disable vmdq loopback - * @hw: pointer to the hardware struct - * @enable: state to enter, either enabled or disabled - * - * enables/disables L2 switch loopback functionality. - **/ -void e1000_vmdq_set_loopback_pf(struct e1000_hw *hw, bool enable) -{ - u32 dtxswc; - - switch (hw->mac.type) { - case e1000_82576: - dtxswc = E1000_READ_REG(hw, E1000_DTXSWC); - if (enable) - dtxswc |= E1000_DTXSWC_VMDQ_LOOPBACK_EN; - else - dtxswc &= ~E1000_DTXSWC_VMDQ_LOOPBACK_EN; - E1000_WRITE_REG(hw, E1000_DTXSWC, dtxswc); - break; - case e1000_i350: - case e1000_i354: - dtxswc = E1000_READ_REG(hw, E1000_TXSWC); - if (enable) - dtxswc |= E1000_DTXSWC_VMDQ_LOOPBACK_EN; - else - dtxswc &= ~E1000_DTXSWC_VMDQ_LOOPBACK_EN; - E1000_WRITE_REG(hw, E1000_TXSWC, dtxswc); - break; - default: - /* Currently no other hardware supports loopback */ - break; - } - - -} - -/** - * e1000_vmdq_set_replication_pf - enable or disable vmdq replication - * @hw: pointer to the hardware struct - * @enable: state to enter, either enabled or disabled - * - * enables/disables replication of packets across multiple pools. - **/ -void e1000_vmdq_set_replication_pf(struct e1000_hw *hw, bool enable) -{ - u32 vt_ctl = E1000_READ_REG(hw, E1000_VT_CTL); - - if (enable) - vt_ctl |= E1000_VT_CTL_VM_REPL_EN; - else - vt_ctl &= ~E1000_VT_CTL_VM_REPL_EN; - - E1000_WRITE_REG(hw, E1000_VT_CTL, vt_ctl); -} - -/** - * e1000_read_phy_reg_82580 - Read 82580 MDI control register - * @hw: pointer to the HW structure - * @offset: register offset to be read - * @data: pointer to the read data - * - * Reads the MDI control register in the PHY at offset and stores the - * information read to data. - **/ -static s32 e1000_read_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 *data) -{ - s32 ret_val; - - DEBUGFUNC("e1000_read_phy_reg_82580"); - - ret_val = hw->phy.ops.acquire(hw); - if (ret_val) - goto out; - - ret_val = e1000_read_phy_reg_mdic(hw, offset, data); - - hw->phy.ops.release(hw); - -out: - return ret_val; -} - -/** - * e1000_write_phy_reg_82580 - Write 82580 MDI control register - * @hw: pointer to the HW structure - * @offset: register offset to write to - * @data: data to write to register at offset - * - * Writes data to MDI control register in the PHY at offset. - **/ -static s32 e1000_write_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 data) -{ - s32 ret_val; - - DEBUGFUNC("e1000_write_phy_reg_82580"); - - ret_val = hw->phy.ops.acquire(hw); - if (ret_val) - goto out; - - ret_val = e1000_write_phy_reg_mdic(hw, offset, data); - - hw->phy.ops.release(hw); - -out: - return ret_val; -} - -/** - * e1000_reset_mdicnfg_82580 - Reset MDICNFG destination and com_mdio bits - * @hw: pointer to the HW structure - * - * This resets the the MDICNFG.Destination and MDICNFG.Com_MDIO bits based on - * the values found in the EEPROM. This addresses an issue in which these - * bits are not restored from EEPROM after reset. - **/ -static s32 e1000_reset_mdicnfg_82580(struct e1000_hw *hw) -{ - s32 ret_val = E1000_SUCCESS; - u32 mdicnfg; - u16 nvm_data = 0; - - DEBUGFUNC("e1000_reset_mdicnfg_82580"); - - if (hw->mac.type != e1000_82580) - goto out; - if (!e1000_sgmii_active_82575(hw)) - goto out; - - ret_val = hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_A + - NVM_82580_LAN_FUNC_OFFSET(hw->bus.func), 1, - &nvm_data); - if (ret_val) { - DEBUGOUT("NVM Read Error\n"); - goto out; - } - - mdicnfg = E1000_READ_REG(hw, E1000_MDICNFG); - if (nvm_data & NVM_WORD24_EXT_MDIO) - mdicnfg |= E1000_MDICNFG_EXT_MDIO; - if (nvm_data & NVM_WORD24_COM_MDIO) - mdicnfg |= E1000_MDICNFG_COM_MDIO; - E1000_WRITE_REG(hw, E1000_MDICNFG, mdicnfg); -out: - return ret_val; -} - -/** - * e1000_reset_hw_82580 - Reset hardware - * @hw: pointer to the HW structure - * - * This resets function or entire device (all ports, etc.) - * to a known state. - **/ -static s32 e1000_reset_hw_82580(struct e1000_hw *hw) -{ - s32 ret_val = E1000_SUCCESS; - /* BH SW mailbox bit in SW_FW_SYNC */ - u16 swmbsw_mask = E1000_SW_SYNCH_MB; - u32 ctrl; - bool global_device_reset = hw->dev_spec._82575.global_device_reset; - - DEBUGFUNC("e1000_reset_hw_82580"); - - hw->dev_spec._82575.global_device_reset = false; - - /* 82580 does not reliably do global_device_reset due to hw errata */ - if (hw->mac.type == e1000_82580) - global_device_reset = false; - - /* Get current control state. */ - ctrl = E1000_READ_REG(hw, E1000_CTRL); - - /* - * Prevent the PCI-E bus from sticking if there is no TLP connection - * on the last TLP read/write transaction when MAC is reset. - */ - ret_val = e1000_disable_pcie_master_generic(hw); - if (ret_val) - DEBUGOUT("PCI-E Master disable polling has failed.\n"); - - DEBUGOUT("Masking off all interrupts\n"); - E1000_WRITE_REG(hw, E1000_IMC, 0xffffffff); - E1000_WRITE_REG(hw, E1000_RCTL, 0); - E1000_WRITE_REG(hw, E1000_TCTL, E1000_TCTL_PSP); - E1000_WRITE_FLUSH(hw); - - msec_delay(10); - - /* Determine whether or not a global dev reset is requested */ - if (global_device_reset && hw->mac.ops.acquire_swfw_sync(hw, - swmbsw_mask)) - global_device_reset = false; - - if (global_device_reset && !(E1000_READ_REG(hw, E1000_STATUS) & - E1000_STAT_DEV_RST_SET)) - ctrl |= E1000_CTRL_DEV_RST; - else - ctrl |= E1000_CTRL_RST; - - E1000_WRITE_REG(hw, E1000_CTRL, ctrl); - E1000_WRITE_FLUSH(hw); - - /* Add delay to insure DEV_RST has time to complete */ - if (global_device_reset) - msec_delay(5); - - ret_val = e1000_get_auto_rd_done_generic(hw); - if (ret_val) { - /* - * When auto config read does not complete, do not - * return with an error. This can happen in situations - * where there is no eeprom and prevents getting link. - */ - DEBUGOUT("Auto Read Done did not complete\n"); - } - - /* clear global device reset status bit */ - E1000_WRITE_REG(hw, E1000_STATUS, E1000_STAT_DEV_RST_SET); - - /* Clear any pending interrupt events. */ - E1000_WRITE_REG(hw, E1000_IMC, 0xffffffff); - E1000_READ_REG(hw, E1000_ICR); - - ret_val = e1000_reset_mdicnfg_82580(hw); - if (ret_val) - DEBUGOUT("Could not reset MDICNFG based on EEPROM\n"); - - /* Install any alternate MAC address into RAR0 */ - ret_val = e1000_check_alt_mac_addr_generic(hw); - - /* Release semaphore */ - if (global_device_reset) - hw->mac.ops.release_swfw_sync(hw, swmbsw_mask); - - return ret_val; -} - -/** - * e1000_rxpbs_adjust_82580 - adjust RXPBS value to reflect actual Rx PBA size - * @data: data received by reading RXPBS register - * - * The 82580 uses a table based approach for packet buffer allocation sizes. - * This function converts the retrieved value into the correct table value - * 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 - * 0x0 36 72 144 1 2 4 8 16 - * 0x8 35 70 140 rsv rsv rsv rsv rsv - */ -u16 e1000_rxpbs_adjust_82580(u32 data) -{ - u16 ret_val = 0; - - if (data < E1000_82580_RXPBS_TABLE_SIZE) - ret_val = e1000_82580_rxpbs_table[data]; - - return ret_val; -} - -/** - * e1000_validate_nvm_checksum_with_offset - Validate EEPROM - * checksum - * @hw: pointer to the HW structure - * @offset: offset in words of the checksum protected region - * - * Calculates the EEPROM checksum by reading/adding each word of the EEPROM - * and then verifies that the sum of the EEPROM is equal to 0xBABA. - **/ -s32 e1000_validate_nvm_checksum_with_offset(struct e1000_hw *hw, u16 offset) -{ - s32 ret_val = E1000_SUCCESS; - u16 checksum = 0; - u16 i, nvm_data; - - DEBUGFUNC("e1000_validate_nvm_checksum_with_offset"); - - for (i = offset; i < ((NVM_CHECKSUM_REG + offset) + 1); i++) { - ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data); - if (ret_val) { - DEBUGOUT("NVM Read Error\n"); - goto out; - } - checksum += nvm_data; - } - - if (checksum != (u16) NVM_SUM) { - DEBUGOUT("NVM Checksum Invalid\n"); - ret_val = -E1000_ERR_NVM; - goto out; - } - -out: - return ret_val; -} - -/** - * e1000_update_nvm_checksum_with_offset - Update EEPROM - * checksum - * @hw: pointer to the HW structure - * @offset: offset in words of the checksum protected region - * - * Updates the EEPROM checksum by reading/adding each word of the EEPROM - * up to the checksum. Then calculates the EEPROM checksum and writes the - * value to the EEPROM. - **/ -s32 e1000_update_nvm_checksum_with_offset(struct e1000_hw *hw, u16 offset) -{ - s32 ret_val; - u16 checksum = 0; - u16 i, nvm_data; - - DEBUGFUNC("e1000_update_nvm_checksum_with_offset"); - - for (i = offset; i < (NVM_CHECKSUM_REG + offset); i++) { - ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data); - if (ret_val) { - DEBUGOUT("NVM Read Error while updating checksum.\n"); - goto out; - } - checksum += nvm_data; - } - checksum = (u16) NVM_SUM - checksum; - ret_val = hw->nvm.ops.write(hw, (NVM_CHECKSUM_REG + offset), 1, - &checksum); - if (ret_val) - DEBUGOUT("NVM Write Error while updating checksum.\n"); - -out: - return ret_val; -} - -/** - * e1000_validate_nvm_checksum_82580 - Validate EEPROM checksum - * @hw: pointer to the HW structure - * - * Calculates the EEPROM section checksum by reading/adding each word of - * the EEPROM and then verifies that the sum of the EEPROM is - * equal to 0xBABA. - **/ -static s32 e1000_validate_nvm_checksum_82580(struct e1000_hw *hw) -{ - s32 ret_val = E1000_SUCCESS; - u16 eeprom_regions_count = 1; - u16 j, nvm_data; - u16 nvm_offset; - - DEBUGFUNC("e1000_validate_nvm_checksum_82580"); - - ret_val = hw->nvm.ops.read(hw, NVM_COMPATIBILITY_REG_3, 1, &nvm_data); - if (ret_val) { - DEBUGOUT("NVM Read Error\n"); - goto out; - } - - if (nvm_data & NVM_COMPATIBILITY_BIT_MASK) { - /* if chekcsums compatibility bit is set validate checksums - * for all 4 ports. */ - eeprom_regions_count = 4; - } - - for (j = 0; j < eeprom_regions_count; j++) { - nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j); - ret_val = e1000_validate_nvm_checksum_with_offset(hw, - nvm_offset); - if (ret_val != E1000_SUCCESS) - goto out; - } - -out: - return ret_val; -} - -/** - * e1000_update_nvm_checksum_82580 - Update EEPROM checksum - * @hw: pointer to the HW structure - * - * Updates the EEPROM section checksums for all 4 ports by reading/adding - * each word of the EEPROM up to the checksum. Then calculates the EEPROM - * checksum and writes the value to the EEPROM. - **/ -static s32 e1000_update_nvm_checksum_82580(struct e1000_hw *hw) -{ - s32 ret_val; - u16 j, nvm_data; - u16 nvm_offset; - - DEBUGFUNC("e1000_update_nvm_checksum_82580"); - - ret_val = hw->nvm.ops.read(hw, NVM_COMPATIBILITY_REG_3, 1, &nvm_data); - if (ret_val) { - DEBUGOUT("NVM Read Error while updating checksum compatibility bit.\n"); - goto out; - } - - if (!(nvm_data & NVM_COMPATIBILITY_BIT_MASK)) { - /* set compatibility bit to validate checksums appropriately */ - nvm_data = nvm_data | NVM_COMPATIBILITY_BIT_MASK; - ret_val = hw->nvm.ops.write(hw, NVM_COMPATIBILITY_REG_3, 1, - &nvm_data); - if (ret_val) { - DEBUGOUT("NVM Write Error while updating checksum compatibility bit.\n"); - goto out; - } - } - - for (j = 0; j < 4; j++) { - nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j); - ret_val = e1000_update_nvm_checksum_with_offset(hw, nvm_offset); - if (ret_val) - goto out; - } - -out: - return ret_val; -} - -/** - * e1000_validate_nvm_checksum_i350 - Validate EEPROM checksum - * @hw: pointer to the HW structure - * - * Calculates the EEPROM section checksum by reading/adding each word of - * the EEPROM and then verifies that the sum of the EEPROM is - * equal to 0xBABA. - **/ -static s32 e1000_validate_nvm_checksum_i350(struct e1000_hw *hw) -{ - s32 ret_val = E1000_SUCCESS; - u16 j; - u16 nvm_offset; - - DEBUGFUNC("e1000_validate_nvm_checksum_i350"); - - for (j = 0; j < 4; j++) { - nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j); - ret_val = e1000_validate_nvm_checksum_with_offset(hw, - nvm_offset); - if (ret_val != E1000_SUCCESS) - goto out; - } - -out: - return ret_val; -} - -/** - * e1000_update_nvm_checksum_i350 - Update EEPROM checksum - * @hw: pointer to the HW structure - * - * Updates the EEPROM section checksums for all 4 ports by reading/adding - * each word of the EEPROM up to the checksum. Then calculates the EEPROM - * checksum and writes the value to the EEPROM. - **/ -static s32 e1000_update_nvm_checksum_i350(struct e1000_hw *hw) -{ - s32 ret_val = E1000_SUCCESS; - u16 j; - u16 nvm_offset; - - DEBUGFUNC("e1000_update_nvm_checksum_i350"); - - for (j = 0; j < 4; j++) { - nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j); - ret_val = e1000_update_nvm_checksum_with_offset(hw, nvm_offset); - if (ret_val != E1000_SUCCESS) - goto out; - } - -out: - return ret_val; -} - -/** - * __e1000_access_emi_reg - Read/write EMI register - * @hw: pointer to the HW structure - * @addr: EMI address to program - * @data: pointer to value to read/write from/to the EMI address - * @read: boolean flag to indicate read or write - **/ -static s32 __e1000_access_emi_reg(struct e1000_hw *hw, u16 address, - u16 *data, bool read) -{ - s32 ret_val = E1000_SUCCESS; - - DEBUGFUNC("__e1000_access_emi_reg"); - - ret_val = hw->phy.ops.write_reg(hw, E1000_EMIADD, address); - if (ret_val) - return ret_val; - - if (read) - ret_val = hw->phy.ops.read_reg(hw, E1000_EMIDATA, data); - else - ret_val = hw->phy.ops.write_reg(hw, E1000_EMIDATA, *data); - - return ret_val; -} - -/** - * e1000_read_emi_reg - Read Extended Management Interface register - * @hw: pointer to the HW structure - * @addr: EMI address to program - * @data: value to be read from the EMI address - **/ -s32 e1000_read_emi_reg(struct e1000_hw *hw, u16 addr, u16 *data) -{ - DEBUGFUNC("e1000_read_emi_reg"); - - return __e1000_access_emi_reg(hw, addr, data, true); -} - -/** - * e1000_set_eee_i350 - Enable/disable EEE support - * @hw: pointer to the HW structure - * - * Enable/disable EEE based on setting in dev_spec structure. - * - **/ -s32 e1000_set_eee_i350(struct e1000_hw *hw) -{ - s32 ret_val = E1000_SUCCESS; - u32 ipcnfg, eeer; - - DEBUGFUNC("e1000_set_eee_i350"); - - if ((hw->mac.type < e1000_i350) || - (hw->phy.media_type != e1000_media_type_copper)) - goto out; - ipcnfg = E1000_READ_REG(hw, E1000_IPCNFG); - eeer = E1000_READ_REG(hw, E1000_EEER); - - /* enable or disable per user setting */ - if (!(hw->dev_spec._82575.eee_disable)) { - u32 eee_su = E1000_READ_REG(hw, E1000_EEE_SU); - - ipcnfg |= (E1000_IPCNFG_EEE_1G_AN | E1000_IPCNFG_EEE_100M_AN); - eeer |= (E1000_EEER_TX_LPI_EN | E1000_EEER_RX_LPI_EN | - E1000_EEER_LPI_FC); - - /* This bit should not be set in normal operation. */ - if (eee_su & E1000_EEE_SU_LPI_CLK_STP) - DEBUGOUT("LPI Clock Stop Bit should not be set!\n"); - } else { - ipcnfg &= ~(E1000_IPCNFG_EEE_1G_AN | E1000_IPCNFG_EEE_100M_AN); - eeer &= ~(E1000_EEER_TX_LPI_EN | E1000_EEER_RX_LPI_EN | - E1000_EEER_LPI_FC); - } - E1000_WRITE_REG(hw, E1000_IPCNFG, ipcnfg); - E1000_WRITE_REG(hw, E1000_EEER, eeer); - E1000_READ_REG(hw, E1000_IPCNFG); - E1000_READ_REG(hw, E1000_EEER); -out: - - return ret_val; -} - -/** - * e1000_set_eee_i354 - Enable/disable EEE support - * @hw: pointer to the HW structure - * - * Enable/disable EEE legacy mode based on setting in dev_spec structure. - * - **/ -s32 e1000_set_eee_i354(struct e1000_hw *hw) -{ - struct e1000_phy_info *phy = &hw->phy; - s32 ret_val = E1000_SUCCESS; - u16 phy_data; - - DEBUGFUNC("e1000_set_eee_i354"); - - if ((hw->phy.media_type != e1000_media_type_copper) || - ((phy->id != M88E1543_E_PHY_ID))) - goto out; - - if (!hw->dev_spec._82575.eee_disable) { - /* Switch to PHY page 18. */ - ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 18); - if (ret_val) - goto out; - - ret_val = phy->ops.read_reg(hw, E1000_M88E1543_EEE_CTRL_1, - &phy_data); - if (ret_val) - goto out; - - phy_data |= E1000_M88E1543_EEE_CTRL_1_MS; - ret_val = phy->ops.write_reg(hw, E1000_M88E1543_EEE_CTRL_1, - phy_data); - if (ret_val) - goto out; - - /* Return the PHY to page 0. */ - ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0); - if (ret_val) - goto out; - - /* Turn on EEE advertisement. */ - ret_val = e1000_read_xmdio_reg(hw, E1000_EEE_ADV_ADDR_I354, - E1000_EEE_ADV_DEV_I354, - &phy_data); - if (ret_val) - goto out; - - phy_data |= E1000_EEE_ADV_100_SUPPORTED | - E1000_EEE_ADV_1000_SUPPORTED; - ret_val = e1000_write_xmdio_reg(hw, E1000_EEE_ADV_ADDR_I354, - E1000_EEE_ADV_DEV_I354, - phy_data); - } else { - /* Turn off EEE advertisement. */ - ret_val = e1000_read_xmdio_reg(hw, E1000_EEE_ADV_ADDR_I354, - E1000_EEE_ADV_DEV_I354, - &phy_data); - if (ret_val) - goto out; - - phy_data &= ~(E1000_EEE_ADV_100_SUPPORTED | - E1000_EEE_ADV_1000_SUPPORTED); - ret_val = e1000_write_xmdio_reg(hw, E1000_EEE_ADV_ADDR_I354, - E1000_EEE_ADV_DEV_I354, - phy_data); - } - -out: - return ret_val; -} - -/** - * e1000_get_eee_status_i354 - Get EEE status - * @hw: pointer to the HW structure - * @status: EEE status - * - * Get EEE status by guessing based on whether Tx or Rx LPI indications have - * been received. - **/ -s32 e1000_get_eee_status_i354(struct e1000_hw *hw, bool *status) -{ - struct e1000_phy_info *phy = &hw->phy; - s32 ret_val = E1000_SUCCESS; - u16 phy_data; - - DEBUGFUNC("e1000_get_eee_status_i354"); - - /* Check if EEE is supported on this device. */ - if ((hw->phy.media_type != e1000_media_type_copper) || - ((phy->id != M88E1543_E_PHY_ID))) - goto out; - - ret_val = e1000_read_xmdio_reg(hw, E1000_PCS_STATUS_ADDR_I354, - E1000_PCS_STATUS_DEV_I354, - &phy_data); - if (ret_val) - goto out; - - *status = phy_data & (E1000_PCS_STATUS_TX_LPI_RCVD | - E1000_PCS_STATUS_RX_LPI_RCVD) ? true : false; - -out: - return ret_val; -} - -/* Due to a hw errata, if the host tries to configure the VFTA register - * while performing queries from the BMC or DMA, then the VFTA in some - * cases won't be written. - */ - -/** - * e1000_clear_vfta_i350 - Clear VLAN filter table - * @hw: pointer to the HW structure - * - * Clears the register array which contains the VLAN filter table by - * setting all the values to 0. - **/ -void e1000_clear_vfta_i350(struct e1000_hw *hw) -{ - u32 offset; - int i; - - DEBUGFUNC("e1000_clear_vfta_350"); - - for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) { - for (i = 0; i < 10; i++) - E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, 0); - - E1000_WRITE_FLUSH(hw); - } -} - -/** - * e1000_write_vfta_i350 - Write value to VLAN filter table - * @hw: pointer to the HW structure - * @offset: register offset in VLAN filter table - * @value: register value written to VLAN filter table - * - * Writes value at the given offset in the register array which stores - * the VLAN filter table. - **/ -void e1000_write_vfta_i350(struct e1000_hw *hw, u32 offset, u32 value) -{ - int i; - - DEBUGFUNC("e1000_write_vfta_350"); - - for (i = 0; i < 10; i++) - E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, value); - - E1000_WRITE_FLUSH(hw); -} - - -/** - * e1000_set_i2c_bb - Enable I2C bit-bang - * @hw: pointer to the HW structure - * - * Enable I2C bit-bang interface - * - **/ -s32 e1000_set_i2c_bb(struct e1000_hw *hw) -{ - s32 ret_val = E1000_SUCCESS; - u32 ctrl_ext, i2cparams; - - DEBUGFUNC("e1000_set_i2c_bb"); - - ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); - ctrl_ext |= E1000_CTRL_I2C_ENA; - E1000_WRITE_REG(hw, E1000_CTRL_EXT, ctrl_ext); - E1000_WRITE_FLUSH(hw); - - i2cparams = E1000_READ_REG(hw, E1000_I2CPARAMS); - i2cparams |= E1000_I2CBB_EN; - i2cparams |= E1000_I2C_DATA_OE_N; - i2cparams |= E1000_I2C_CLK_OE_N; - E1000_WRITE_REG(hw, E1000_I2CPARAMS, i2cparams); - E1000_WRITE_FLUSH(hw); - - return ret_val; -} - -/** - * e1000_read_i2c_byte_generic - Reads 8 bit word over I2C - * @hw: pointer to hardware structure - * @byte_offset: byte offset to read - * @dev_addr: device address - * @data: value read - * - * Performs byte read operation over I2C interface at - * a specified device address. - **/ -s32 e1000_read_i2c_byte_generic(struct e1000_hw *hw, u8 byte_offset, - u8 dev_addr, u8 *data) -{ - s32 status = E1000_SUCCESS; - u32 max_retry = 10; - u32 retry = 1; - u16 swfw_mask = 0; - - bool nack = true; - - DEBUGFUNC("e1000_read_i2c_byte_generic"); - - swfw_mask = E1000_SWFW_PHY0_SM; - - do { - if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) - != E1000_SUCCESS) { - status = E1000_ERR_SWFW_SYNC; - goto read_byte_out; - } - - e1000_i2c_start(hw); - - /* Device Address and write indication */ - status = e1000_clock_out_i2c_byte(hw, dev_addr); - if (status != E1000_SUCCESS) - goto fail; - - status = e1000_get_i2c_ack(hw); - if (status != E1000_SUCCESS) - goto fail; - - status = e1000_clock_out_i2c_byte(hw, byte_offset); - if (status != E1000_SUCCESS) - goto fail; - - status = e1000_get_i2c_ack(hw); - if (status != E1000_SUCCESS) - goto fail; - - e1000_i2c_start(hw); - - /* Device Address and read indication */ - status = e1000_clock_out_i2c_byte(hw, (dev_addr | 0x1)); - if (status != E1000_SUCCESS) - goto fail; - - status = e1000_get_i2c_ack(hw); - if (status != E1000_SUCCESS) - goto fail; - - status = e1000_clock_in_i2c_byte(hw, data); - if (status != E1000_SUCCESS) - goto fail; - - status = e1000_clock_out_i2c_bit(hw, nack); - if (status != E1000_SUCCESS) - goto fail; - - e1000_i2c_stop(hw); - break; - -fail: - hw->mac.ops.release_swfw_sync(hw, swfw_mask); - msec_delay(100); - e1000_i2c_bus_clear(hw); - retry++; - if (retry < max_retry) - DEBUGOUT("I2C byte read error - Retrying.\n"); - else - DEBUGOUT("I2C byte read error.\n"); - - } while (retry < max_retry); - - hw->mac.ops.release_swfw_sync(hw, swfw_mask); - -read_byte_out: - - return status; -} - -/** - * e1000_write_i2c_byte_generic - Writes 8 bit word over I2C - * @hw: pointer to hardware structure - * @byte_offset: byte offset to write - * @dev_addr: device address - * @data: value to write - * - * Performs byte write operation over I2C interface at - * a specified device address. - **/ -s32 e1000_write_i2c_byte_generic(struct e1000_hw *hw, u8 byte_offset, - u8 dev_addr, u8 data) -{ - s32 status = E1000_SUCCESS; - u32 max_retry = 1; - u32 retry = 0; - u16 swfw_mask = 0; - - DEBUGFUNC("e1000_write_i2c_byte_generic"); - - swfw_mask = E1000_SWFW_PHY0_SM; - - if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) != E1000_SUCCESS) { - status = E1000_ERR_SWFW_SYNC; - goto write_byte_out; - } - - do { - e1000_i2c_start(hw); - - status = e1000_clock_out_i2c_byte(hw, dev_addr); - if (status != E1000_SUCCESS) - goto fail; - - status = e1000_get_i2c_ack(hw); - if (status != E1000_SUCCESS) - goto fail; - - status = e1000_clock_out_i2c_byte(hw, byte_offset); - if (status != E1000_SUCCESS) - goto fail; - - status = e1000_get_i2c_ack(hw); - if (status != E1000_SUCCESS) - goto fail; - - status = e1000_clock_out_i2c_byte(hw, data); - if (status != E1000_SUCCESS) - goto fail; - - status = e1000_get_i2c_ack(hw); - if (status != E1000_SUCCESS) - goto fail; - - e1000_i2c_stop(hw); - break; - -fail: - e1000_i2c_bus_clear(hw); - retry++; - if (retry < max_retry) - DEBUGOUT("I2C byte write error - Retrying.\n"); - else - DEBUGOUT("I2C byte write error.\n"); - } while (retry < max_retry); - - hw->mac.ops.release_swfw_sync(hw, swfw_mask); - -write_byte_out: - - return status; -} - -/** - * e1000_i2c_start - Sets I2C start condition - * @hw: pointer to hardware structure - * - * Sets I2C start condition (High -> Low on SDA while SCL is High) - **/ -static void e1000_i2c_start(struct e1000_hw *hw) -{ - u32 i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); - - DEBUGFUNC("e1000_i2c_start"); - - /* Start condition must begin with data and clock high */ - e1000_set_i2c_data(hw, &i2cctl, 1); - e1000_raise_i2c_clk(hw, &i2cctl); - - /* Setup time for start condition (4.7us) */ - usec_delay(E1000_I2C_T_SU_STA); - - e1000_set_i2c_data(hw, &i2cctl, 0); - - /* Hold time for start condition (4us) */ - usec_delay(E1000_I2C_T_HD_STA); - - e1000_lower_i2c_clk(hw, &i2cctl); - - /* Minimum low period of clock is 4.7 us */ - usec_delay(E1000_I2C_T_LOW); - -} - -/** - * e1000_i2c_stop - Sets I2C stop condition - * @hw: pointer to hardware structure - * - * Sets I2C stop condition (Low -> High on SDA while SCL is High) - **/ -static void e1000_i2c_stop(struct e1000_hw *hw) -{ - u32 i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); - - DEBUGFUNC("e1000_i2c_stop"); - - /* Stop condition must begin with data low and clock high */ - e1000_set_i2c_data(hw, &i2cctl, 0); - e1000_raise_i2c_clk(hw, &i2cctl); - - /* Setup time for stop condition (4us) */ - usec_delay(E1000_I2C_T_SU_STO); - - e1000_set_i2c_data(hw, &i2cctl, 1); - - /* bus free time between stop and start (4.7us)*/ - usec_delay(E1000_I2C_T_BUF); -} - -/** - * e1000_clock_in_i2c_byte - Clocks in one byte via I2C - * @hw: pointer to hardware structure - * @data: data byte to clock in - * - * Clocks in one byte data via I2C data/clock - **/ -static s32 e1000_clock_in_i2c_byte(struct e1000_hw *hw, u8 *data) -{ - s32 i; - bool bit = 0; - - DEBUGFUNC("e1000_clock_in_i2c_byte"); - - *data = 0; - for (i = 7; i >= 0; i--) { - e1000_clock_in_i2c_bit(hw, &bit); - *data |= bit << i; - } - - return E1000_SUCCESS; -} - -/** - * e1000_clock_out_i2c_byte - Clocks out one byte via I2C - * @hw: pointer to hardware structure - * @data: data byte clocked out - * - * Clocks out one byte data via I2C data/clock - **/ -static s32 e1000_clock_out_i2c_byte(struct e1000_hw *hw, u8 data) -{ - s32 status = E1000_SUCCESS; - s32 i; - u32 i2cctl; - bool bit = 0; - - DEBUGFUNC("e1000_clock_out_i2c_byte"); - - for (i = 7; i >= 0; i--) { - bit = (data >> i) & 0x1; - status = e1000_clock_out_i2c_bit(hw, bit); - - if (status != E1000_SUCCESS) - break; - } - - /* Release SDA line (set high) */ - i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); - - i2cctl |= E1000_I2C_DATA_OE_N; - E1000_WRITE_REG(hw, E1000_I2CPARAMS, i2cctl); - E1000_WRITE_FLUSH(hw); - - return status; -} - -/** - * e1000_get_i2c_ack - Polls for I2C ACK - * @hw: pointer to hardware structure - * - * Clocks in/out one bit via I2C data/clock - **/ -static s32 e1000_get_i2c_ack(struct e1000_hw *hw) -{ - s32 status = E1000_SUCCESS; - u32 i = 0; - u32 i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); - u32 timeout = 10; - bool ack = true; - - DEBUGFUNC("e1000_get_i2c_ack"); - - e1000_raise_i2c_clk(hw, &i2cctl); - - /* Minimum high period of clock is 4us */ - usec_delay(E1000_I2C_T_HIGH); - - /* Wait until SCL returns high */ - for (i = 0; i < timeout; i++) { - usec_delay(1); - i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); - if (i2cctl & E1000_I2C_CLK_IN) - break; - } - if (!(i2cctl & E1000_I2C_CLK_IN)) - return E1000_ERR_I2C; - - ack = e1000_get_i2c_data(&i2cctl); - if (ack) { - DEBUGOUT("I2C ack was not received.\n"); - status = E1000_ERR_I2C; - } - - e1000_lower_i2c_clk(hw, &i2cctl); - - /* Minimum low period of clock is 4.7 us */ - usec_delay(E1000_I2C_T_LOW); - - return status; -} - -/** - * e1000_clock_in_i2c_bit - Clocks in one bit via I2C data/clock - * @hw: pointer to hardware structure - * @data: read data value - * - * Clocks in one bit via I2C data/clock - **/ -static s32 e1000_clock_in_i2c_bit(struct e1000_hw *hw, bool *data) -{ - u32 i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); - - DEBUGFUNC("e1000_clock_in_i2c_bit"); - - e1000_raise_i2c_clk(hw, &i2cctl); - - /* Minimum high period of clock is 4us */ - usec_delay(E1000_I2C_T_HIGH); - - i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); - *data = e1000_get_i2c_data(&i2cctl); - - e1000_lower_i2c_clk(hw, &i2cctl); - - /* Minimum low period of clock is 4.7 us */ - usec_delay(E1000_I2C_T_LOW); - - return E1000_SUCCESS; -} - -/** - * e1000_clock_out_i2c_bit - Clocks in/out one bit via I2C data/clock - * @hw: pointer to hardware structure - * @data: data value to write - * - * Clocks out one bit via I2C data/clock - **/ -static s32 e1000_clock_out_i2c_bit(struct e1000_hw *hw, bool data) -{ - s32 status; - u32 i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); - - DEBUGFUNC("e1000_clock_out_i2c_bit"); - - status = e1000_set_i2c_data(hw, &i2cctl, data); - if (status == E1000_SUCCESS) { - e1000_raise_i2c_clk(hw, &i2cctl); - - /* Minimum high period of clock is 4us */ - usec_delay(E1000_I2C_T_HIGH); - - e1000_lower_i2c_clk(hw, &i2cctl); - - /* Minimum low period of clock is 4.7 us. - * This also takes care of the data hold time. - */ - usec_delay(E1000_I2C_T_LOW); - } else { - status = E1000_ERR_I2C; - DEBUGOUT1("I2C data was not set to %X\n", data); - } - - return status; -} -/** - * e1000_raise_i2c_clk - Raises the I2C SCL clock - * @hw: pointer to hardware structure - * @i2cctl: Current value of I2CCTL register - * - * Raises the I2C clock line '0'->'1' - **/ -static void e1000_raise_i2c_clk(struct e1000_hw *hw, u32 *i2cctl) -{ - DEBUGFUNC("e1000_raise_i2c_clk"); - - *i2cctl |= E1000_I2C_CLK_OUT; - *i2cctl &= ~E1000_I2C_CLK_OE_N; - E1000_WRITE_REG(hw, E1000_I2CPARAMS, *i2cctl); - E1000_WRITE_FLUSH(hw); - - /* SCL rise time (1000ns) */ - usec_delay(E1000_I2C_T_RISE); -} - -/** - * e1000_lower_i2c_clk - Lowers the I2C SCL clock - * @hw: pointer to hardware structure - * @i2cctl: Current value of I2CCTL register - * - * Lowers the I2C clock line '1'->'0' - **/ -static void e1000_lower_i2c_clk(struct e1000_hw *hw, u32 *i2cctl) -{ - - DEBUGFUNC("e1000_lower_i2c_clk"); - - *i2cctl &= ~E1000_I2C_CLK_OUT; - *i2cctl &= ~E1000_I2C_CLK_OE_N; - E1000_WRITE_REG(hw, E1000_I2CPARAMS, *i2cctl); - E1000_WRITE_FLUSH(hw); - - /* SCL fall time (300ns) */ - usec_delay(E1000_I2C_T_FALL); -} - -/** - * e1000_set_i2c_data - Sets the I2C data bit - * @hw: pointer to hardware structure - * @i2cctl: Current value of I2CCTL register - * @data: I2C data value (0 or 1) to set - * - * Sets the I2C data bit - **/ -static s32 e1000_set_i2c_data(struct e1000_hw *hw, u32 *i2cctl, bool data) -{ - s32 status = E1000_SUCCESS; - - DEBUGFUNC("e1000_set_i2c_data"); - - if (data) - *i2cctl |= E1000_I2C_DATA_OUT; - else - *i2cctl &= ~E1000_I2C_DATA_OUT; - - *i2cctl &= ~E1000_I2C_DATA_OE_N; - *i2cctl |= E1000_I2C_CLK_OE_N; - E1000_WRITE_REG(hw, E1000_I2CPARAMS, *i2cctl); - E1000_WRITE_FLUSH(hw); - - /* Data rise/fall (1000ns/300ns) and set-up time (250ns) */ - usec_delay(E1000_I2C_T_RISE + E1000_I2C_T_FALL + E1000_I2C_T_SU_DATA); - - *i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); - if (data != e1000_get_i2c_data(i2cctl)) { - status = E1000_ERR_I2C; - DEBUGOUT1("Error - I2C data was not set to %X.\n", data); - } - - return status; -} - -/** - * e1000_get_i2c_data - Reads the I2C SDA data bit - * @hw: pointer to hardware structure - * @i2cctl: Current value of I2CCTL register - * - * Returns the I2C data bit value - **/ -static bool e1000_get_i2c_data(u32 *i2cctl) -{ - bool data; - - DEBUGFUNC("e1000_get_i2c_data"); - - if (*i2cctl & E1000_I2C_DATA_IN) - data = 1; - else - data = 0; - - return data; -} - -/** - * e1000_i2c_bus_clear - Clears the I2C bus - * @hw: pointer to hardware structure - * - * Clears the I2C bus by sending nine clock pulses. - * Used when data line is stuck low. - **/ -void e1000_i2c_bus_clear(struct e1000_hw *hw) -{ - u32 i2cctl = E1000_READ_REG(hw, E1000_I2CPARAMS); - u32 i; - - DEBUGFUNC("e1000_i2c_bus_clear"); - - e1000_i2c_start(hw); - - e1000_set_i2c_data(hw, &i2cctl, 1); - - for (i = 0; i < 9; i++) { - e1000_raise_i2c_clk(hw, &i2cctl); - - /* Min high period of clock is 4us */ - usec_delay(E1000_I2C_T_HIGH); - - e1000_lower_i2c_clk(hw, &i2cctl); - - /* Min low period of clock is 4.7us*/ - usec_delay(E1000_I2C_T_LOW); - } - - e1000_i2c_start(hw); - - /* Put the i2c bus back to default state */ - e1000_i2c_stop(hw); -} - -static const u8 e1000_emc_temp_data[4] = { - E1000_EMC_INTERNAL_DATA, - E1000_EMC_DIODE1_DATA, - E1000_EMC_DIODE2_DATA, - E1000_EMC_DIODE3_DATA -}; -static const u8 e1000_emc_therm_limit[4] = { - E1000_EMC_INTERNAL_THERM_LIMIT, - E1000_EMC_DIODE1_THERM_LIMIT, - E1000_EMC_DIODE2_THERM_LIMIT, - E1000_EMC_DIODE3_THERM_LIMIT -}; - -/** - * e1000_get_thermal_sensor_data_generic - Gathers thermal sensor data - * @hw: pointer to hardware structure - * - * Updates the temperatures in mac.thermal_sensor_data - **/ -s32 e1000_get_thermal_sensor_data_generic(struct e1000_hw *hw) -{ - s32 status = E1000_SUCCESS; - u16 ets_offset; - u16 ets_cfg; - u16 ets_sensor; - u8 num_sensors; - u8 sensor_index; - u8 sensor_location; - u8 i; - struct e1000_thermal_sensor_data *data = &hw->mac.thermal_sensor_data; - - DEBUGFUNC("e1000_get_thermal_sensor_data_generic"); - - if ((hw->mac.type != e1000_i350) || (hw->bus.func != 0)) - return E1000_NOT_IMPLEMENTED; - - data->sensor[0].temp = (E1000_READ_REG(hw, E1000_THMJT) & 0xFF); - - /* Return the internal sensor only if ETS is unsupported */ - e1000_read_nvm(hw, NVM_ETS_CFG, 1, &ets_offset); - if ((ets_offset == 0x0000) || (ets_offset == 0xFFFF)) - return status; - - e1000_read_nvm(hw, ets_offset, 1, &ets_cfg); - if (((ets_cfg & NVM_ETS_TYPE_MASK) >> NVM_ETS_TYPE_SHIFT) - != NVM_ETS_TYPE_EMC) - return E1000_NOT_IMPLEMENTED; - - num_sensors = (ets_cfg & NVM_ETS_NUM_SENSORS_MASK); - if (num_sensors > E1000_MAX_SENSORS) - num_sensors = E1000_MAX_SENSORS; - - for (i = 1; i < num_sensors; i++) { - e1000_read_nvm(hw, (ets_offset + i), 1, &ets_sensor); - sensor_index = ((ets_sensor & NVM_ETS_DATA_INDEX_MASK) >> - NVM_ETS_DATA_INDEX_SHIFT); - sensor_location = ((ets_sensor & NVM_ETS_DATA_LOC_MASK) >> - NVM_ETS_DATA_LOC_SHIFT); - - if (sensor_location != 0) - hw->phy.ops.read_i2c_byte(hw, - e1000_emc_temp_data[sensor_index], - E1000_I2C_THERMAL_SENSOR_ADDR, - &data->sensor[i].temp); - } - return status; -} - -/** - * e1000_init_thermal_sensor_thresh_generic - Sets thermal sensor thresholds - * @hw: pointer to hardware structure - * - * Sets the thermal sensor thresholds according to the NVM map - * and save off the threshold and location values into mac.thermal_sensor_data - **/ -s32 e1000_init_thermal_sensor_thresh_generic(struct e1000_hw *hw) -{ - s32 status = E1000_SUCCESS; - u16 ets_offset; - u16 ets_cfg; - u16 ets_sensor; - u8 low_thresh_delta; - u8 num_sensors; - u8 sensor_index; - u8 sensor_location; - u8 therm_limit; - u8 i; - struct e1000_thermal_sensor_data *data = &hw->mac.thermal_sensor_data; - - DEBUGFUNC("e1000_init_thermal_sensor_thresh_generic"); - - if ((hw->mac.type != e1000_i350) || (hw->bus.func != 0)) - return E1000_NOT_IMPLEMENTED; - - memset(data, 0, sizeof(struct e1000_thermal_sensor_data)); - - data->sensor[0].location = 0x1; - data->sensor[0].caution_thresh = - (E1000_READ_REG(hw, E1000_THHIGHTC) & 0xFF); - data->sensor[0].max_op_thresh = - (E1000_READ_REG(hw, E1000_THLOWTC) & 0xFF); - - /* Return the internal sensor only if ETS is unsupported */ - e1000_read_nvm(hw, NVM_ETS_CFG, 1, &ets_offset); - if ((ets_offset == 0x0000) || (ets_offset == 0xFFFF)) - return status; - - e1000_read_nvm(hw, ets_offset, 1, &ets_cfg); - if (((ets_cfg & NVM_ETS_TYPE_MASK) >> NVM_ETS_TYPE_SHIFT) - != NVM_ETS_TYPE_EMC) - return E1000_NOT_IMPLEMENTED; - - low_thresh_delta = ((ets_cfg & NVM_ETS_LTHRES_DELTA_MASK) >> - NVM_ETS_LTHRES_DELTA_SHIFT); - num_sensors = (ets_cfg & NVM_ETS_NUM_SENSORS_MASK); - - for (i = 1; i <= num_sensors; i++) { - e1000_read_nvm(hw, (ets_offset + i), 1, &ets_sensor); - sensor_index = ((ets_sensor & NVM_ETS_DATA_INDEX_MASK) >> - NVM_ETS_DATA_INDEX_SHIFT); - sensor_location = ((ets_sensor & NVM_ETS_DATA_LOC_MASK) >> - NVM_ETS_DATA_LOC_SHIFT); - therm_limit = ets_sensor & NVM_ETS_DATA_HTHRESH_MASK; - - hw->phy.ops.write_i2c_byte(hw, - e1000_emc_therm_limit[sensor_index], - E1000_I2C_THERMAL_SENSOR_ADDR, - therm_limit); - - if ((i < E1000_MAX_SENSORS) && (sensor_location != 0)) { - data->sensor[i].location = sensor_location; - data->sensor[i].caution_thresh = therm_limit; - data->sensor[i].max_op_thresh = therm_limit - - low_thresh_delta; - } - } - return status; -} |