diff options
Diffstat (limited to 'src/dpdk_lib18/librte_eal/linuxapp/kni/ethtool/ixgbe/ixgbe_api.c')
| -rwxr-xr-x | src/dpdk_lib18/librte_eal/linuxapp/kni/ethtool/ixgbe/ixgbe_api.c | 1158 |
1 files changed, 0 insertions, 1158 deletions
diff --git a/src/dpdk_lib18/librte_eal/linuxapp/kni/ethtool/ixgbe/ixgbe_api.c b/src/dpdk_lib18/librte_eal/linuxapp/kni/ethtool/ixgbe/ixgbe_api.c deleted file mode 100755 index 9a0a43e6..00000000 --- a/src/dpdk_lib18/librte_eal/linuxapp/kni/ethtool/ixgbe/ixgbe_api.c +++ /dev/null @@ -1,1158 +0,0 @@ -/******************************************************************************* - - Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2012 Intel Corporation. - - This program is free software; you can redistribute it and/or modify it - under the terms and conditions of the GNU General Public License, - version 2, as published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - more details. - - You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., - 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - - The full GNU General Public License is included in this distribution in - the file called "COPYING". - - Contact Information: - e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - -#include "ixgbe_api.h" -#include "ixgbe_common.h" - -/** - * ixgbe_init_shared_code - Initialize the shared code - * @hw: pointer to hardware structure - * - * This will assign function pointers and assign the MAC type and PHY code. - * Does not touch the hardware. This function must be called prior to any - * other function in the shared code. The ixgbe_hw structure should be - * memset to 0 prior to calling this function. The following fields in - * hw structure should be filled in prior to calling this function: - * hw_addr, back, device_id, vendor_id, subsystem_device_id, - * subsystem_vendor_id, and revision_id - **/ -s32 ixgbe_init_shared_code(struct ixgbe_hw *hw) -{ - s32 status; - - /* - * Set the mac type - */ - ixgbe_set_mac_type(hw); - - switch (hw->mac.type) { - case ixgbe_mac_82598EB: - status = ixgbe_init_ops_82598(hw); - break; - case ixgbe_mac_82599EB: - status = ixgbe_init_ops_82599(hw); - break; - case ixgbe_mac_X540: - status = ixgbe_init_ops_X540(hw); - break; - default: - status = IXGBE_ERR_DEVICE_NOT_SUPPORTED; - break; - } - - return status; -} - -/** - * ixgbe_set_mac_type - Sets MAC type - * @hw: pointer to the HW structure - * - * This function sets the mac type of the adapter based on the - * vendor ID and device ID stored in the hw structure. - **/ -s32 ixgbe_set_mac_type(struct ixgbe_hw *hw) -{ - s32 ret_val = 0; - - if (hw->vendor_id == IXGBE_INTEL_VENDOR_ID) { - switch (hw->device_id) { - case IXGBE_DEV_ID_82598: - case IXGBE_DEV_ID_82598_BX: - case IXGBE_DEV_ID_82598AF_SINGLE_PORT: - case IXGBE_DEV_ID_82598AF_DUAL_PORT: - case IXGBE_DEV_ID_82598AT: - case IXGBE_DEV_ID_82598AT2: - case IXGBE_DEV_ID_82598EB_CX4: - case IXGBE_DEV_ID_82598_CX4_DUAL_PORT: - case IXGBE_DEV_ID_82598_DA_DUAL_PORT: - case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM: - case IXGBE_DEV_ID_82598EB_XF_LR: - case IXGBE_DEV_ID_82598EB_SFP_LOM: - hw->mac.type = ixgbe_mac_82598EB; - break; - case IXGBE_DEV_ID_82599_KX4: - case IXGBE_DEV_ID_82599_KX4_MEZZ: - case IXGBE_DEV_ID_82599_XAUI_LOM: - case IXGBE_DEV_ID_82599_COMBO_BACKPLANE: - case IXGBE_DEV_ID_82599_KR: - case IXGBE_DEV_ID_82599_SFP: - case IXGBE_DEV_ID_82599_BACKPLANE_FCOE: - case IXGBE_DEV_ID_82599_SFP_FCOE: - case IXGBE_DEV_ID_82599_SFP_EM: - case IXGBE_DEV_ID_82599_SFP_SF2: - case IXGBE_DEV_ID_82599_QSFP_SF_QP: - case IXGBE_DEV_ID_82599EN_SFP: - case IXGBE_DEV_ID_82599_CX4: - case IXGBE_DEV_ID_82599_LS: - case IXGBE_DEV_ID_82599_T3_LOM: - hw->mac.type = ixgbe_mac_82599EB; - break; - case IXGBE_DEV_ID_X540T: - hw->mac.type = ixgbe_mac_X540; - break; - default: - ret_val = IXGBE_ERR_DEVICE_NOT_SUPPORTED; - break; - } - } else { - ret_val = IXGBE_ERR_DEVICE_NOT_SUPPORTED; - } - - hw_dbg(hw, "ixgbe_set_mac_type found mac: %d, returns: %d\n", - hw->mac.type, ret_val); - return ret_val; -} - -/** - * ixgbe_init_hw - Initialize the hardware - * @hw: pointer to hardware structure - * - * Initialize the hardware by resetting and then starting the hardware - **/ -s32 ixgbe_init_hw(struct ixgbe_hw *hw) -{ - return ixgbe_call_func(hw, hw->mac.ops.init_hw, (hw), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_reset_hw - Performs a hardware reset - * @hw: pointer to hardware structure - * - * Resets the hardware by resetting the transmit and receive units, masks and - * clears all interrupts, performs a PHY reset, and performs a MAC reset - **/ -s32 ixgbe_reset_hw(struct ixgbe_hw *hw) -{ - return ixgbe_call_func(hw, hw->mac.ops.reset_hw, (hw), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_start_hw - Prepares hardware for Rx/Tx - * @hw: pointer to hardware structure - * - * Starts the hardware by filling the bus info structure and media type, - * clears all on chip counters, initializes receive address registers, - * multicast table, VLAN filter table, calls routine to setup link and - * flow control settings, and leaves transmit and receive units disabled - * and uninitialized. - **/ -s32 ixgbe_start_hw(struct ixgbe_hw *hw) -{ - return ixgbe_call_func(hw, hw->mac.ops.start_hw, (hw), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_clear_hw_cntrs - Clear hardware counters - * @hw: pointer to hardware structure - * - * Clears all hardware statistics counters by reading them from the hardware - * Statistics counters are clear on read. - **/ -s32 ixgbe_clear_hw_cntrs(struct ixgbe_hw *hw) -{ - return ixgbe_call_func(hw, hw->mac.ops.clear_hw_cntrs, (hw), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_get_media_type - Get media type - * @hw: pointer to hardware structure - * - * Returns the media type (fiber, copper, backplane) - **/ -enum ixgbe_media_type ixgbe_get_media_type(struct ixgbe_hw *hw) -{ - return ixgbe_call_func(hw, hw->mac.ops.get_media_type, (hw), - ixgbe_media_type_unknown); -} - -/** - * ixgbe_get_mac_addr - Get MAC address - * @hw: pointer to hardware structure - * @mac_addr: Adapter MAC address - * - * Reads the adapter's MAC address from the first Receive Address Register - * (RAR0) A reset of the adapter must have been performed prior to calling - * this function in order for the MAC address to have been loaded from the - * EEPROM into RAR0 - **/ -s32 ixgbe_get_mac_addr(struct ixgbe_hw *hw, u8 *mac_addr) -{ - return ixgbe_call_func(hw, hw->mac.ops.get_mac_addr, - (hw, mac_addr), IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_get_san_mac_addr - Get SAN MAC address - * @hw: pointer to hardware structure - * @san_mac_addr: SAN MAC address - * - * Reads the SAN MAC address from the EEPROM, if it's available. This is - * per-port, so set_lan_id() must be called before reading the addresses. - **/ -s32 ixgbe_get_san_mac_addr(struct ixgbe_hw *hw, u8 *san_mac_addr) -{ - return ixgbe_call_func(hw, hw->mac.ops.get_san_mac_addr, - (hw, san_mac_addr), IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_set_san_mac_addr - Write a SAN MAC address - * @hw: pointer to hardware structure - * @san_mac_addr: SAN MAC address - * - * Writes A SAN MAC address to the EEPROM. - **/ -s32 ixgbe_set_san_mac_addr(struct ixgbe_hw *hw, u8 *san_mac_addr) -{ - return ixgbe_call_func(hw, hw->mac.ops.set_san_mac_addr, - (hw, san_mac_addr), IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_get_device_caps - Get additional device capabilities - * @hw: pointer to hardware structure - * @device_caps: the EEPROM word for device capabilities - * - * Reads the extra device capabilities from the EEPROM - **/ -s32 ixgbe_get_device_caps(struct ixgbe_hw *hw, u16 *device_caps) -{ - return ixgbe_call_func(hw, hw->mac.ops.get_device_caps, - (hw, device_caps), IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_get_wwn_prefix - Get alternative WWNN/WWPN prefix from the EEPROM - * @hw: pointer to hardware structure - * @wwnn_prefix: the alternative WWNN prefix - * @wwpn_prefix: the alternative WWPN prefix - * - * This function will read the EEPROM from the alternative SAN MAC address - * block to check the support for the alternative WWNN/WWPN prefix support. - **/ -s32 ixgbe_get_wwn_prefix(struct ixgbe_hw *hw, u16 *wwnn_prefix, - u16 *wwpn_prefix) -{ - return ixgbe_call_func(hw, hw->mac.ops.get_wwn_prefix, - (hw, wwnn_prefix, wwpn_prefix), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_get_fcoe_boot_status - Get FCOE boot status from EEPROM - * @hw: pointer to hardware structure - * @bs: the fcoe boot status - * - * This function will read the FCOE boot status from the iSCSI FCOE block - **/ -s32 ixgbe_get_fcoe_boot_status(struct ixgbe_hw *hw, u16 *bs) -{ - return ixgbe_call_func(hw, hw->mac.ops.get_fcoe_boot_status, - (hw, bs), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_get_bus_info - Set PCI bus info - * @hw: pointer to hardware structure - * - * Sets the PCI bus info (speed, width, type) within the ixgbe_hw structure - **/ -s32 ixgbe_get_bus_info(struct ixgbe_hw *hw) -{ - return ixgbe_call_func(hw, hw->mac.ops.get_bus_info, (hw), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_get_num_of_tx_queues - Get Tx queues - * @hw: pointer to hardware structure - * - * Returns the number of transmit queues for the given adapter. - **/ -u32 ixgbe_get_num_of_tx_queues(struct ixgbe_hw *hw) -{ - return hw->mac.max_tx_queues; -} - -/** - * ixgbe_get_num_of_rx_queues - Get Rx queues - * @hw: pointer to hardware structure - * - * Returns the number of receive queues for the given adapter. - **/ -u32 ixgbe_get_num_of_rx_queues(struct ixgbe_hw *hw) -{ - return hw->mac.max_rx_queues; -} - -/** - * ixgbe_stop_adapter - Disable Rx/Tx units - * @hw: pointer to hardware structure - * - * Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts, - * disables transmit and receive units. The adapter_stopped flag is used by - * the shared code and drivers to determine if the adapter is in a stopped - * state and should not touch the hardware. - **/ -s32 ixgbe_stop_adapter(struct ixgbe_hw *hw) -{ - return ixgbe_call_func(hw, hw->mac.ops.stop_adapter, (hw), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_read_pba_string - Reads part number string from EEPROM - * @hw: pointer to hardware structure - * @pba_num: stores the part number string from the EEPROM - * @pba_num_size: part number string buffer length - * - * Reads the part number string from the EEPROM. - **/ -s32 ixgbe_read_pba_string(struct ixgbe_hw *hw, u8 *pba_num, u32 pba_num_size) -{ - return ixgbe_read_pba_string_generic(hw, pba_num, pba_num_size); -} - -/** - * ixgbe_identify_phy - Get PHY type - * @hw: pointer to hardware structure - * - * Determines the physical layer module found on the current adapter. - **/ -s32 ixgbe_identify_phy(struct ixgbe_hw *hw) -{ - s32 status = 0; - - if (hw->phy.type == ixgbe_phy_unknown) { - status = ixgbe_call_func(hw, hw->phy.ops.identify, (hw), - IXGBE_NOT_IMPLEMENTED); - } - - return status; -} - -/** - * ixgbe_reset_phy - Perform a PHY reset - * @hw: pointer to hardware structure - **/ -s32 ixgbe_reset_phy(struct ixgbe_hw *hw) -{ - s32 status = 0; - - if (hw->phy.type == ixgbe_phy_unknown) { - if (ixgbe_identify_phy(hw) != 0) - status = IXGBE_ERR_PHY; - } - - if (status == 0) { - status = ixgbe_call_func(hw, hw->phy.ops.reset, (hw), - IXGBE_NOT_IMPLEMENTED); - } - return status; -} - -/** - * ixgbe_get_phy_firmware_version - - * @hw: pointer to hardware structure - * @firmware_version: pointer to firmware version - **/ -s32 ixgbe_get_phy_firmware_version(struct ixgbe_hw *hw, u16 *firmware_version) -{ - s32 status = 0; - - status = ixgbe_call_func(hw, hw->phy.ops.get_firmware_version, - (hw, firmware_version), - IXGBE_NOT_IMPLEMENTED); - return status; -} - -/** - * ixgbe_read_phy_reg - Read PHY register - * @hw: pointer to hardware structure - * @reg_addr: 32 bit address of PHY register to read - * @phy_data: Pointer to read data from PHY register - * - * Reads a value from a specified PHY register - **/ -s32 ixgbe_read_phy_reg(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, - u16 *phy_data) -{ - if (hw->phy.id == 0) - ixgbe_identify_phy(hw); - - return ixgbe_call_func(hw, hw->phy.ops.read_reg, (hw, reg_addr, - device_type, phy_data), IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_write_phy_reg - Write PHY register - * @hw: pointer to hardware structure - * @reg_addr: 32 bit PHY register to write - * @phy_data: Data to write to the PHY register - * - * Writes a value to specified PHY register - **/ -s32 ixgbe_write_phy_reg(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, - u16 phy_data) -{ - if (hw->phy.id == 0) - ixgbe_identify_phy(hw); - - return ixgbe_call_func(hw, hw->phy.ops.write_reg, (hw, reg_addr, - device_type, phy_data), IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_setup_phy_link - Restart PHY autoneg - * @hw: pointer to hardware structure - * - * Restart autonegotiation and PHY and waits for completion. - **/ -s32 ixgbe_setup_phy_link(struct ixgbe_hw *hw) -{ - return ixgbe_call_func(hw, hw->phy.ops.setup_link, (hw), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_check_phy_link - Determine link and speed status - * @hw: pointer to hardware structure - * - * Reads a PHY register to determine if link is up and the current speed for - * the PHY. - **/ -s32 ixgbe_check_phy_link(struct ixgbe_hw *hw, ixgbe_link_speed *speed, - bool *link_up) -{ - return ixgbe_call_func(hw, hw->phy.ops.check_link, (hw, speed, - link_up), IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_setup_phy_link_speed - Set auto advertise - * @hw: pointer to hardware structure - * @speed: new link speed - * @autoneg: true if autonegotiation enabled - * - * Sets the auto advertised capabilities - **/ -s32 ixgbe_setup_phy_link_speed(struct ixgbe_hw *hw, ixgbe_link_speed speed, - bool autoneg, - bool autoneg_wait_to_complete) -{ - return ixgbe_call_func(hw, hw->phy.ops.setup_link_speed, (hw, speed, - autoneg, autoneg_wait_to_complete), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_check_link - Get link and speed status - * @hw: pointer to hardware structure - * - * Reads the links register to determine if link is up and the current speed - **/ -s32 ixgbe_check_link(struct ixgbe_hw *hw, ixgbe_link_speed *speed, - bool *link_up, bool link_up_wait_to_complete) -{ - return ixgbe_call_func(hw, hw->mac.ops.check_link, (hw, speed, - link_up, link_up_wait_to_complete), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_disable_tx_laser - Disable Tx laser - * @hw: pointer to hardware structure - * - * If the driver needs to disable the laser on SFI optics. - **/ -void ixgbe_disable_tx_laser(struct ixgbe_hw *hw) -{ - if (hw->mac.ops.disable_tx_laser) - hw->mac.ops.disable_tx_laser(hw); -} - -/** - * ixgbe_enable_tx_laser - Enable Tx laser - * @hw: pointer to hardware structure - * - * If the driver needs to enable the laser on SFI optics. - **/ -void ixgbe_enable_tx_laser(struct ixgbe_hw *hw) -{ - if (hw->mac.ops.enable_tx_laser) - hw->mac.ops.enable_tx_laser(hw); -} - -/** - * ixgbe_flap_tx_laser - flap Tx laser to start autotry process - * @hw: pointer to hardware structure - * - * When the driver changes the link speeds that it can support then - * flap the tx laser to alert the link partner to start autotry - * process on its end. - **/ -void ixgbe_flap_tx_laser(struct ixgbe_hw *hw) -{ - if (hw->mac.ops.flap_tx_laser) - hw->mac.ops.flap_tx_laser(hw); -} - -/** - * ixgbe_setup_link - Set link speed - * @hw: pointer to hardware structure - * @speed: new link speed - * @autoneg: true if autonegotiation enabled - * - * Configures link settings. Restarts the link. - * Performs autonegotiation if needed. - **/ -s32 ixgbe_setup_link(struct ixgbe_hw *hw, ixgbe_link_speed speed, - bool autoneg, - bool autoneg_wait_to_complete) -{ - return ixgbe_call_func(hw, hw->mac.ops.setup_link, (hw, speed, - autoneg, autoneg_wait_to_complete), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_get_link_capabilities - Returns link capabilities - * @hw: pointer to hardware structure - * - * Determines the link capabilities of the current configuration. - **/ -s32 ixgbe_get_link_capabilities(struct ixgbe_hw *hw, ixgbe_link_speed *speed, - bool *autoneg) -{ - return ixgbe_call_func(hw, hw->mac.ops.get_link_capabilities, (hw, - speed, autoneg), IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_led_on - Turn on LEDs - * @hw: pointer to hardware structure - * @index: led number to turn on - * - * Turns on the software controllable LEDs. - **/ -s32 ixgbe_led_on(struct ixgbe_hw *hw, u32 index) -{ - return ixgbe_call_func(hw, hw->mac.ops.led_on, (hw, index), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_led_off - Turn off LEDs - * @hw: pointer to hardware structure - * @index: led number to turn off - * - * Turns off the software controllable LEDs. - **/ -s32 ixgbe_led_off(struct ixgbe_hw *hw, u32 index) -{ - return ixgbe_call_func(hw, hw->mac.ops.led_off, (hw, index), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_blink_led_start - Blink LEDs - * @hw: pointer to hardware structure - * @index: led number to blink - * - * Blink LED based on index. - **/ -s32 ixgbe_blink_led_start(struct ixgbe_hw *hw, u32 index) -{ - return ixgbe_call_func(hw, hw->mac.ops.blink_led_start, (hw, index), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_blink_led_stop - Stop blinking LEDs - * @hw: pointer to hardware structure - * - * Stop blinking LED based on index. - **/ -s32 ixgbe_blink_led_stop(struct ixgbe_hw *hw, u32 index) -{ - return ixgbe_call_func(hw, hw->mac.ops.blink_led_stop, (hw, index), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_init_eeprom_params - Initialize EEPROM parameters - * @hw: pointer to hardware structure - * - * Initializes the EEPROM parameters ixgbe_eeprom_info within the - * ixgbe_hw struct in order to set up EEPROM access. - **/ -s32 ixgbe_init_eeprom_params(struct ixgbe_hw *hw) -{ - return ixgbe_call_func(hw, hw->eeprom.ops.init_params, (hw), - IXGBE_NOT_IMPLEMENTED); -} - - -/** - * ixgbe_write_eeprom - Write word to EEPROM - * @hw: pointer to hardware structure - * @offset: offset within the EEPROM to be written to - * @data: 16 bit word to be written to the EEPROM - * - * Writes 16 bit value to EEPROM. If ixgbe_eeprom_update_checksum is not - * called after this function, the EEPROM will most likely contain an - * invalid checksum. - **/ -s32 ixgbe_write_eeprom(struct ixgbe_hw *hw, u16 offset, u16 data) -{ - return ixgbe_call_func(hw, hw->eeprom.ops.write, (hw, offset, data), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_write_eeprom_buffer - Write word(s) to EEPROM - * @hw: pointer to hardware structure - * @offset: offset within the EEPROM to be written to - * @data: 16 bit word(s) to be written to the EEPROM - * @words: number of words - * - * Writes 16 bit word(s) to EEPROM. If ixgbe_eeprom_update_checksum is not - * called after this function, the EEPROM will most likely contain an - * invalid checksum. - **/ -s32 ixgbe_write_eeprom_buffer(struct ixgbe_hw *hw, u16 offset, u16 words, - u16 *data) -{ - return ixgbe_call_func(hw, hw->eeprom.ops.write_buffer, - (hw, offset, words, data), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_read_eeprom - Read word from EEPROM - * @hw: pointer to hardware structure - * @offset: offset within the EEPROM to be read - * @data: read 16 bit value from EEPROM - * - * Reads 16 bit value from EEPROM - **/ -s32 ixgbe_read_eeprom(struct ixgbe_hw *hw, u16 offset, u16 *data) -{ - return ixgbe_call_func(hw, hw->eeprom.ops.read, (hw, offset, data), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_read_eeprom_buffer - Read word(s) from EEPROM - * @hw: pointer to hardware structure - * @offset: offset within the EEPROM to be read - * @data: read 16 bit word(s) from EEPROM - * @words: number of words - * - * Reads 16 bit word(s) from EEPROM - **/ -s32 ixgbe_read_eeprom_buffer(struct ixgbe_hw *hw, u16 offset, - u16 words, u16 *data) -{ - return ixgbe_call_func(hw, hw->eeprom.ops.read_buffer, - (hw, offset, words, data), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_validate_eeprom_checksum - Validate EEPROM checksum - * @hw: pointer to hardware structure - * @checksum_val: calculated checksum - * - * Performs checksum calculation and validates the EEPROM checksum - **/ -s32 ixgbe_validate_eeprom_checksum(struct ixgbe_hw *hw, u16 *checksum_val) -{ - return ixgbe_call_func(hw, hw->eeprom.ops.validate_checksum, - (hw, checksum_val), IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_eeprom_update_checksum - Updates the EEPROM checksum - * @hw: pointer to hardware structure - **/ -s32 ixgbe_update_eeprom_checksum(struct ixgbe_hw *hw) -{ - return ixgbe_call_func(hw, hw->eeprom.ops.update_checksum, (hw), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_insert_mac_addr - Find a RAR for this mac address - * @hw: pointer to hardware structure - * @addr: Address to put into receive address register - * @vmdq: VMDq pool to assign - * - * Puts an ethernet address into a receive address register, or - * finds the rar that it is aleady in; adds to the pool list - **/ -s32 ixgbe_insert_mac_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq) -{ - return ixgbe_call_func(hw, hw->mac.ops.insert_mac_addr, - (hw, addr, vmdq), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_set_rar - Set Rx address register - * @hw: pointer to hardware structure - * @index: Receive address register to write - * @addr: Address to put into receive address register - * @vmdq: VMDq "set" - * @enable_addr: set flag that address is active - * - * Puts an ethernet address into a receive address register. - **/ -s32 ixgbe_set_rar(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq, - u32 enable_addr) -{ - return ixgbe_call_func(hw, hw->mac.ops.set_rar, (hw, index, addr, vmdq, - enable_addr), IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_clear_rar - Clear Rx address register - * @hw: pointer to hardware structure - * @index: Receive address register to write - * - * Puts an ethernet address into a receive address register. - **/ -s32 ixgbe_clear_rar(struct ixgbe_hw *hw, u32 index) -{ - return ixgbe_call_func(hw, hw->mac.ops.clear_rar, (hw, index), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_set_vmdq - Associate a VMDq index with a receive address - * @hw: pointer to hardware structure - * @rar: receive address register index to associate with VMDq index - * @vmdq: VMDq set or pool index - **/ -s32 ixgbe_set_vmdq(struct ixgbe_hw *hw, u32 rar, u32 vmdq) -{ - return ixgbe_call_func(hw, hw->mac.ops.set_vmdq, (hw, rar, vmdq), - IXGBE_NOT_IMPLEMENTED); - -} - -/** - * ixgbe_set_vmdq_san_mac - Associate VMDq index 127 with a receive address - * @hw: pointer to hardware structure - * @vmdq: VMDq default pool index - **/ -s32 ixgbe_set_vmdq_san_mac(struct ixgbe_hw *hw, u32 vmdq) -{ - return ixgbe_call_func(hw, hw->mac.ops.set_vmdq_san_mac, - (hw, vmdq), IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_clear_vmdq - Disassociate a VMDq index from a receive address - * @hw: pointer to hardware structure - * @rar: receive address register index to disassociate with VMDq index - * @vmdq: VMDq set or pool index - **/ -s32 ixgbe_clear_vmdq(struct ixgbe_hw *hw, u32 rar, u32 vmdq) -{ - return ixgbe_call_func(hw, hw->mac.ops.clear_vmdq, (hw, rar, vmdq), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_init_rx_addrs - Initializes receive address filters. - * @hw: pointer to hardware structure - * - * Places the MAC address in receive address register 0 and clears the rest - * of the receive address registers. Clears the multicast table. Assumes - * the receiver is in reset when the routine is called. - **/ -s32 ixgbe_init_rx_addrs(struct ixgbe_hw *hw) -{ - return ixgbe_call_func(hw, hw->mac.ops.init_rx_addrs, (hw), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_get_num_rx_addrs - Returns the number of RAR entries. - * @hw: pointer to hardware structure - **/ -u32 ixgbe_get_num_rx_addrs(struct ixgbe_hw *hw) -{ - return hw->mac.num_rar_entries; -} - -/** - * ixgbe_update_uc_addr_list - Updates the MAC's list of secondary addresses - * @hw: pointer to hardware structure - * @addr_list: the list of new multicast addresses - * @addr_count: number of addresses - * @func: iterator function to walk the multicast address list - * - * The given list replaces any existing list. Clears the secondary addrs from - * receive address registers. Uses unused receive address registers for the - * first secondary addresses, and falls back to promiscuous mode as needed. - **/ -s32 ixgbe_update_uc_addr_list(struct ixgbe_hw *hw, u8 *addr_list, - u32 addr_count, ixgbe_mc_addr_itr func) -{ - return ixgbe_call_func(hw, hw->mac.ops.update_uc_addr_list, (hw, - addr_list, addr_count, func), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_update_mc_addr_list - Updates the MAC's list of multicast addresses - * @hw: pointer to hardware structure - * @mc_addr_list: the list of new multicast addresses - * @mc_addr_count: number of addresses - * @func: iterator function to walk the multicast address list - * - * The given list replaces any existing list. Clears the MC addrs from receive - * address registers and the multicast table. Uses unused receive address - * registers for the first multicast addresses, and hashes the rest into the - * multicast table. - **/ -s32 ixgbe_update_mc_addr_list(struct ixgbe_hw *hw, u8 *mc_addr_list, - u32 mc_addr_count, ixgbe_mc_addr_itr func, - bool clear) -{ - return ixgbe_call_func(hw, hw->mac.ops.update_mc_addr_list, (hw, - mc_addr_list, mc_addr_count, func, clear), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_enable_mc - Enable multicast address in RAR - * @hw: pointer to hardware structure - * - * Enables multicast address in RAR and the use of the multicast hash table. - **/ -s32 ixgbe_enable_mc(struct ixgbe_hw *hw) -{ - return ixgbe_call_func(hw, hw->mac.ops.enable_mc, (hw), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_disable_mc - Disable multicast address in RAR - * @hw: pointer to hardware structure - * - * Disables multicast address in RAR and the use of the multicast hash table. - **/ -s32 ixgbe_disable_mc(struct ixgbe_hw *hw) -{ - return ixgbe_call_func(hw, hw->mac.ops.disable_mc, (hw), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_clear_vfta - Clear VLAN filter table - * @hw: pointer to hardware structure - * - * Clears the VLAN filer table, and the VMDq index associated with the filter - **/ -s32 ixgbe_clear_vfta(struct ixgbe_hw *hw) -{ - return ixgbe_call_func(hw, hw->mac.ops.clear_vfta, (hw), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_set_vfta - Set VLAN filter table - * @hw: pointer to hardware structure - * @vlan: VLAN id to write to VLAN filter - * @vind: VMDq output index that maps queue to VLAN id in VFTA - * @vlan_on: boolean flag to turn on/off VLAN in VFTA - * - * Turn on/off specified VLAN in the VLAN filter table. - **/ -s32 ixgbe_set_vfta(struct ixgbe_hw *hw, u32 vlan, u32 vind, bool vlan_on) -{ - return ixgbe_call_func(hw, hw->mac.ops.set_vfta, (hw, vlan, vind, - vlan_on), IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_set_vlvf - Set VLAN Pool Filter - * @hw: pointer to hardware structure - * @vlan: VLAN id to write to VLAN filter - * @vind: VMDq output index that maps queue to VLAN id in VFVFB - * @vlan_on: boolean flag to turn on/off VLAN in VFVF - * @vfta_changed: pointer to boolean flag which indicates whether VFTA - * should be changed - * - * Turn on/off specified bit in VLVF table. - **/ -s32 ixgbe_set_vlvf(struct ixgbe_hw *hw, u32 vlan, u32 vind, bool vlan_on, - bool *vfta_changed) -{ - return ixgbe_call_func(hw, hw->mac.ops.set_vlvf, (hw, vlan, vind, - vlan_on, vfta_changed), IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_fc_enable - Enable flow control - * @hw: pointer to hardware structure - * - * Configures the flow control settings based on SW configuration. - **/ -s32 ixgbe_fc_enable(struct ixgbe_hw *hw) -{ - return ixgbe_call_func(hw, hw->mac.ops.fc_enable, (hw), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_set_fw_drv_ver - Try to send the driver version number FW - * @hw: pointer to hardware structure - * @maj: driver major number to be sent to firmware - * @min: driver minor number to be sent to firmware - * @build: driver build number to be sent to firmware - * @ver: driver version number to be sent to firmware - **/ -s32 ixgbe_set_fw_drv_ver(struct ixgbe_hw *hw, u8 maj, u8 min, u8 build, - u8 ver) -{ - return ixgbe_call_func(hw, hw->mac.ops.set_fw_drv_ver, (hw, maj, min, - build, ver), IXGBE_NOT_IMPLEMENTED); -} - - -/** - * ixgbe_get_thermal_sensor_data - Gathers thermal sensor data - * @hw: pointer to hardware structure - * - * Updates the temperatures in mac.thermal_sensor_data - **/ -s32 ixgbe_get_thermal_sensor_data(struct ixgbe_hw *hw) -{ - return ixgbe_call_func(hw, hw->mac.ops.get_thermal_sensor_data, (hw), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_init_thermal_sensor_thresh - Inits thermal sensor thresholds - * @hw: pointer to hardware structure - * - * Inits the thermal sensor thresholds according to the NVM map - **/ -s32 ixgbe_init_thermal_sensor_thresh(struct ixgbe_hw *hw) -{ - return ixgbe_call_func(hw, hw->mac.ops.init_thermal_sensor_thresh, (hw), - IXGBE_NOT_IMPLEMENTED); -} -/** - * ixgbe_read_analog_reg8 - Reads 8 bit analog register - * @hw: pointer to hardware structure - * @reg: analog register to read - * @val: read value - * - * Performs write operation to analog register specified. - **/ -s32 ixgbe_read_analog_reg8(struct ixgbe_hw *hw, u32 reg, u8 *val) -{ - return ixgbe_call_func(hw, hw->mac.ops.read_analog_reg8, (hw, reg, - val), IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_write_analog_reg8 - Writes 8 bit analog register - * @hw: pointer to hardware structure - * @reg: analog register to write - * @val: value to write - * - * Performs write operation to Atlas analog register specified. - **/ -s32 ixgbe_write_analog_reg8(struct ixgbe_hw *hw, u32 reg, u8 val) -{ - return ixgbe_call_func(hw, hw->mac.ops.write_analog_reg8, (hw, reg, - val), IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_init_uta_tables - Initializes Unicast Table Arrays. - * @hw: pointer to hardware structure - * - * Initializes the Unicast Table Arrays to zero on device load. This - * is part of the Rx init addr execution path. - **/ -s32 ixgbe_init_uta_tables(struct ixgbe_hw *hw) -{ - return ixgbe_call_func(hw, hw->mac.ops.init_uta_tables, (hw), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_read_i2c_byte - Reads 8 bit word over I2C at specified device address - * @hw: pointer to hardware structure - * @byte_offset: byte offset to read - * @data: value read - * - * Performs byte read operation to SFP module's EEPROM over I2C interface. - **/ -s32 ixgbe_read_i2c_byte(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr, - u8 *data) -{ - return ixgbe_call_func(hw, hw->phy.ops.read_i2c_byte, (hw, byte_offset, - dev_addr, data), IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_write_i2c_byte - Writes 8 bit word over I2C - * @hw: pointer to hardware structure - * @byte_offset: byte offset to write - * @data: value to write - * - * Performs byte write operation to SFP module's EEPROM over I2C interface - * at a specified device address. - **/ -s32 ixgbe_write_i2c_byte(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr, - u8 data) -{ - return ixgbe_call_func(hw, hw->phy.ops.write_i2c_byte, (hw, byte_offset, - dev_addr, data), IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_write_i2c_eeprom - Writes 8 bit EEPROM word over I2C interface - * @hw: pointer to hardware structure - * @byte_offset: EEPROM byte offset to write - * @eeprom_data: value to write - * - * Performs byte write operation to SFP module's EEPROM over I2C interface. - **/ -s32 ixgbe_write_i2c_eeprom(struct ixgbe_hw *hw, - u8 byte_offset, u8 eeprom_data) -{ - return ixgbe_call_func(hw, hw->phy.ops.write_i2c_eeprom, - (hw, byte_offset, eeprom_data), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_read_i2c_eeprom - Reads 8 bit EEPROM word over I2C interface - * @hw: pointer to hardware structure - * @byte_offset: EEPROM byte offset to read - * @eeprom_data: value read - * - * Performs byte read operation to SFP module's EEPROM over I2C interface. - **/ -s32 ixgbe_read_i2c_eeprom(struct ixgbe_hw *hw, u8 byte_offset, u8 *eeprom_data) -{ - return ixgbe_call_func(hw, hw->phy.ops.read_i2c_eeprom, - (hw, byte_offset, eeprom_data), - IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_get_supported_physical_layer - Returns physical layer type - * @hw: pointer to hardware structure - * - * Determines physical layer capabilities of the current configuration. - **/ -u32 ixgbe_get_supported_physical_layer(struct ixgbe_hw *hw) -{ - return ixgbe_call_func(hw, hw->mac.ops.get_supported_physical_layer, - (hw), IXGBE_PHYSICAL_LAYER_UNKNOWN); -} - -/** - * ixgbe_enable_rx_dma - Enables Rx DMA unit, dependent on device specifics - * @hw: pointer to hardware structure - * @regval: bitfield to write to the Rx DMA register - * - * Enables the Rx DMA unit of the device. - **/ -s32 ixgbe_enable_rx_dma(struct ixgbe_hw *hw, u32 regval) -{ - return ixgbe_call_func(hw, hw->mac.ops.enable_rx_dma, - (hw, regval), IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_disable_sec_rx_path - Stops the receive data path - * @hw: pointer to hardware structure - * - * Stops the receive data path. - **/ -s32 ixgbe_disable_sec_rx_path(struct ixgbe_hw *hw) -{ - return ixgbe_call_func(hw, hw->mac.ops.disable_sec_rx_path, - (hw), IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_enable_sec_rx_path - Enables the receive data path - * @hw: pointer to hardware structure - * - * Enables the receive data path. - **/ -s32 ixgbe_enable_sec_rx_path(struct ixgbe_hw *hw) -{ - return ixgbe_call_func(hw, hw->mac.ops.enable_sec_rx_path, - (hw), IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_acquire_swfw_semaphore - Acquire SWFW semaphore - * @hw: pointer to hardware structure - * @mask: Mask to specify which semaphore to acquire - * - * Acquires the SWFW semaphore through SW_FW_SYNC register for the specified - * function (CSR, PHY0, PHY1, EEPROM, Flash) - **/ -s32 ixgbe_acquire_swfw_semaphore(struct ixgbe_hw *hw, u16 mask) -{ - return ixgbe_call_func(hw, hw->mac.ops.acquire_swfw_sync, - (hw, mask), IXGBE_NOT_IMPLEMENTED); -} - -/** - * ixgbe_release_swfw_semaphore - Release SWFW semaphore - * @hw: pointer to hardware structure - * @mask: Mask to specify which semaphore to release - * - * Releases the SWFW semaphore through SW_FW_SYNC register for the specified - * function (CSR, PHY0, PHY1, EEPROM, Flash) - **/ -void ixgbe_release_swfw_semaphore(struct ixgbe_hw *hw, u16 mask) -{ - if (hw->mac.ops.release_swfw_sync) - hw->mac.ops.release_swfw_sync(hw, mask); -} - |