diff options
Diffstat (limited to 'src')
| -rwxr-xr-x | src/bp_sim.cpp | 8 | ||||
| -rwxr-xr-x | src/main_dpdk.cpp | 51 |
2 files changed, 27 insertions, 32 deletions
diff --git a/src/bp_sim.cpp b/src/bp_sim.cpp index 22335da4..d35ae68a 100755 --- a/src/bp_sim.cpp +++ b/src/bp_sim.cpp @@ -219,7 +219,7 @@ bool CPlatformSocketInfoConfig::init(){ m_max_threads_per_dual_if = num_threads; }else{ if (lp->m_threads.size() != num_threads) { - printf("ERROR number of threads per dual ports should be the same for all dual ports\n"); + printf("ERROR, the number of threads per dual ports should be the same for all dual ports\n"); exit(1); } } @@ -231,7 +231,7 @@ bool CPlatformSocketInfoConfig::init(){ uint8_t phy_thread = lp->m_threads[j]; if (phy_thread>MAX_THREADS_SUPPORTED) { - printf("ERROR physical thread id is %d higher than max %d \n",phy_thread,MAX_THREADS_SUPPORTED); + printf("ERROR, physical thread id is %d higher than max %d \n",phy_thread,MAX_THREADS_SUPPORTED); exit(1); } @@ -479,8 +479,8 @@ void CPlatformSocketInfo::dump(FILE *fd){ void CRteMemPool::dump_in_case_of_error(FILE *fd){ - fprintf(fd," ERROR ERROR there is no enough memory in socket %d \n",m_pool_id); - fprintf(fd," Try to enlarge the memory values in the configuration file /etc/trex_cfg.yaml \n"); + fprintf(fd," ERROR,there is no enough memory in socket %d \n",m_pool_id); + fprintf(fd," Try to enlarge the memory values in the configuration file -/etc/trex_cfg.yaml ,see manual for more detail \n"); dump(fd); } diff --git a/src/main_dpdk.cpp b/src/main_dpdk.cpp index 692e1c0e..865c84ed 100755 --- a/src/main_dpdk.cpp +++ b/src/main_dpdk.cpp @@ -552,19 +552,17 @@ static int usage(){ printf(" --mac [file] : YAML file with <client ip, mac addr> configuration \n"); printf(" \n\n"); - printf(" -r : realtime enable \n"); - printf(" \n\n"); - printf(" -c [number of cores] : 1 ,2,3,4,5 numnber of dual cores + master 1 means 1 master and 2 cores \n"); + printf(" -c [number of threads] : default is 1. number of threads to allocate for each dual ports. \n"); printf(" \n"); - printf(" -s : run only one data path core\n"); + printf(" -s : run only one data path core. for debug\n"); printf(" \n"); - printf(" --flip : flow will be sent from client->server and server->client for maximum throughput \n"); + printf(" --flip : flow will be sent from client->server and server->client for maximum throughput \n"); printf(" \n"); - printf(" -p : flow-flip , send all packets flow from the same interface base of client ip \n"); + printf(" -p : flow-flip , send all flow packets from the same interface base of client ip \n"); printf(" -e : like -p but comply to the generator rules \n"); printf(" \n"); - printf(" -l [pkt/sec] : run laterncy daemon in this rate \n"); + printf(" -l [pkt/sec] : run latency daemon in this rate \n"); printf(" e.g -l 1000 run 1000 pkt/sec from each interface , zero mean to disable latency check \n"); printf(" --lm : latency mask \n"); printf(" 0x1 only port 0 will send traffic \n"); @@ -572,20 +570,18 @@ static int usage(){ printf(" \n"); - printf(" --limit-ports : limit number of ports , must be even e.g 2,4 \n"); + printf(" --limit-ports : limit number of ports, must be even e.g. 2,4 \n"); printf(" \n"); - printf(" --nc : if set will not close all the flow , faster \n"); + printf(" --nc : If set, will not wait for all the flows to be closed, terminate faster- see manual for more information \n"); printf(" \n"); - printf(" -d : duration of the test in sec \n"); + printf(" -d : duration of the test in sec. look for --nc \n"); printf(" \n"); - printf(" -pm : platform factor , in case you have splitter in the setup you can multiply the total results in this factor \n"); + printf(" -pm : platform factor ,in case you have splitter in the setup you can multiply the total results in this factor \n"); printf(" e.g --pm 2.0 will multiply all the results bps in this factor \n"); printf(" \n"); printf(" -pubd : disable monitors publishers \n"); - printf(" -m : factor of bandwidth \n"); - printf(" \n"); - printf(" -1g : 1G trex \n"); + printf(" -m : factor of bandwidth \n"); printf(" \n"); printf(" -k [sec] : run latency test before starting the test. it will wait for x sec sending packet and x sec after that \n"); printf(" \n"); @@ -595,7 +591,7 @@ static int usage(){ printf(" you can copy this file to /etc/trex_cfg.yaml \n"); printf(" \n"); - printf(" --ipv6 : work in ipv6 mode \n"); + printf(" --ipv6 : work in ipv6 mode\n"); printf(" --learn : Work in NAT environments, learn the dynamic NAT translation and ALG \n"); printf(" --learn-verify : Learn the translation, but intended for verification of the mechanism in cases that NAT does not exist \n"); @@ -610,17 +606,17 @@ static int usage(){ printf(" Warning : This program can generate huge-files (TB ) watch out! try this only on local drive \n"); printf(" \n"); printf(" \n"); - printf(" --rx-check [sample] : enable rx check thread , using this thread we sample flows 1/sample and check order,latency and more \n"); + printf(" --rx-check [sample] : enable rx check thread, using this thread we sample flows 1/sample and check order,latency and more \n"); printf(" this feature consume another thread \n"); printf(" \n"); - printf(" --hops [hops] : If rx check is enabled, the hop number can be assigned. The default number of hops is 1\n"); - printf(" --iom [mode] : io mode for interactive mode [0- silent, 1- normal , 2- short] \n"); + printf(" --hops [hops] : If rx check is enabled, the hop number can be assigned. The default number of hops is 1\n"); + printf(" --iom [mode] : io mode for interactive mode [0- silent, 1- normal , 2- short] \n"); printf(" this feature consume another thread \n"); printf(" \n"); - printf(" --no-key : daemon mode, don't get input from keyboard \n"); - printf(" --no-flow-control : In default TRex disables flow-control using this flag it does not touch it \n"); - printf(" --prefix : for multi trex, each instance should have a different name \n"); - printf(" --mac-spread : Spread the destination mac-order by this factor. e.g 2 will generate the traffic to 2 devices DEST-MAC ,DEST-MAC+1 \n"); + printf(" --no-key : daemon mode, don't get input from keyboard \n"); + printf(" --no-flow-control : In default TRex disables flow-control using this flag it does not touch it \n"); + printf(" --prefix : for multi trex, each instance should have a different name \n"); + printf(" --mac-spread : Spread the destination mac-order by this factor. e.g 2 will generate the traffic to 2 devices DEST-MAC ,DEST-MAC+1 \n"); printf(" maximum is up to 128 devices \n"); @@ -631,7 +627,7 @@ static int usage(){ printf(" \n"); printf(" -o [capfile_name] simulate trex into pcap file \n"); printf(" --pcap export the file in pcap mode \n"); - printf(" t-rex-64 -d 10 -f cfg.yaml -o my.pcap --pcap # export 10 sec of what Trex will do on real-time to a file my.pcap \n"); + printf(" bp-sim-64 -d 10 -f cfg.yaml -o my.pcap --pcap # export 10 sec of what Trex will do on real-time to a file my.pcap \n"); printf(" --vm-sim : simulate vm with driver of one input queue and one output queue \n"); printf(" \n"); printf(" Examples: "); @@ -893,7 +889,7 @@ static int parse_options(int argc, char *argv[], CParserOption* po, bool first_t } if (po->preview.get_is_rx_check_enable() && ( po->is_latency_disabled() ) ) { - printf(" rx check must be enable with latency check. try adding '-l 1000' \n"); + printf(" rx check must be enabled with latency check. try adding '-l 1000' \n"); return -1; } @@ -906,7 +902,7 @@ static int parse_options(int argc, char *argv[], CParserOption* po, bool first_t uint32_t cores=po->preview.getCores(); if ( cores > ((BP_MAX_CORES)/2-1) ) { - printf(" ERROR maximum cores are : %d \n",((BP_MAX_CORES)/2-1)); + printf(" ERROR maximum supported cores are : %d \n",((BP_MAX_CORES)/2-1)); return -1; } @@ -4649,11 +4645,10 @@ int main_test(int argc , char * argv[]){ && (CGlobalInfo::m_options.m_latency_prev>0) ){ uint32_t pkts = CGlobalInfo::m_options.m_latency_prev* CGlobalInfo::m_options.m_latency_rate; - printf("Start prev latency check - hack for Keren for %d sec \n",CGlobalInfo::m_options.m_latency_prev); + printf("Start prev latency check- for %d sec \n",CGlobalInfo::m_options.m_latency_prev); g_trex.m_mg.start(pkts); - printf("Delay now you can call command \n"); delay(CGlobalInfo::m_options.m_latency_prev* 1000); - printf("Finish wating \n"); + printf("Finished \n"); g_trex.m_mg.reset(); g_trex.reset_counters(); } |