aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorSatoru Matsushima <satoru.matsushima@gmail.com>2020-05-18 17:33:57 +0900
committerAndrew Yourtchenko <ayourtch@gmail.com>2020-05-25 15:59:41 +0000
commit04d4d92f961905d93da313a89ecd0951a2a12bc6 (patch)
treefbe09db5b7915d9d07a39785f77bf1b000a9a8e4
parentbe955ef3160cfbfd02dd14bbc624b6d57c2324ea (diff)
srv6-mobile: Update the doc of 20.05 for gtp4.dt and gtp6.dt funcitons.
Document update to reflect merged SRv6 functions into 20.05 of lookup and forwarding for inner IP packet encapsulated with outer IP and GTP-U headers. Type: docs Signed-off-by: Satoru Matsushima <satoru.matsushima@gmail.com> Change-Id: I85c9ddf6bf9fa63f2b8b6e03eff3ecec1e7615ab
-rw-r--r--src/plugins/srv6-mobile/mobile_plugin_doc.md69
1 files changed, 64 insertions, 5 deletions
diff --git a/src/plugins/srv6-mobile/mobile_plugin_doc.md b/src/plugins/srv6-mobile/mobile_plugin_doc.md
index df8af19280b..3a44e795838 100644
--- a/src/plugins/srv6-mobile/mobile_plugin_doc.md
+++ b/src/plugins/srv6-mobile/mobile_plugin_doc.md
@@ -3,22 +3,29 @@ SRv6 Mobile User Plane Plugins {#srv6_mobile_plugin_doc}
# Introduction
-This plugin module can provide the stateless mobile user plane protocols translation between GTP-U and SRv6. The functions of the translation take advantage of SRv6 network programmability.
+This plugin module can provide the stateless mobile user plane protocols translation between GTP-U and SRv6. The plugin also provides FIB table lookup for an IPv4/IPv6 packet encapsulated in GTP-U. These plugin functions take advantage of SRv6 network programmability.
[SRv6 Mobile User Plane](https://tools.ietf.org/html/draft-ietf-dmm-srv6-mobile-uplane) defines the user plane protocol using SRv6
including following stateless translation functions:
-- **T.M.GTP4.D:**
+- **T.M.GTP4.D:**
GTP-U over UDP/IPv4 -> SRv6
-- **End.M.GTP4.E:**
+- **End.M.GTP4.E:**
SRv6 -> GTP-U over UDP/IPv4
-- **End.M.GTP6.D:**
+- **End.M.GTP6.D:**
GTP-U over UDP/IPv6 -> SRv6
-- **End.M.GTP6.E:**
+- **End.M.GTP6.E:**
SRv6 -> GTP-U over UDP/IPv6
These functions benefit user plane(overlay) to be able to utilize data plane(underlay) networks properly. And also it benefits data plane to be able to handle user plane in routing paradigm.
+In addition to the above functions, the plugin supports following functions:
+
+- **T.M.GTP4.DT{4|6|46}:**
+ FIB table lookup for IPv4/IP6 encapsulated in GTP-U over UDP/IPv4
+- **End.M.GTP6.DT{4|6|46}:**
+ FIB table lookup for IPv4/IP6 encapsulated in GTP-U over UDP/IPv6
+
Noted that the prefix of function names follow naming convention of SRv6 network programming. "T" means transit function, "End" means end function, "M" means Mobility specific function. The suffix "D" and "E" mean that "decapsulation" and "encapsulation" respectively.
@@ -138,5 +145,57 @@ For example, the below command configures the SID prefix 2001:db8::/64 with `end
sr localsid prefix 2001:db8::/64 behavior end.m.gtp6.e
```
+## FIB Table Lookup for Inner IPv4/IPv6 packet
+
+SRv6 Mobile functions of `t.m.gtp4.dt*` and `end.m.gtp6.dt*` support decapsulating outer IP/UDP/GTP-U headers and forwarding inner IP packet based on specific fib table.
+
+In case of the both outer and inner IP address families are IPv4, `t.m.gtp4.dt4` function supports GTP-U decapsulation and fib lookup for inner IPv4 with an associated steering policy and the following parameters:
+
+- SID: A SRv6 SID to represents the function
+- FIB: fib-table number for inner IPv4 packet lookup and forwarding
+
+The following command instantiates a new T.M.GTP4.DT4 function.
+
+```
+sr policy add bsid SID behavior t.m.gtp4.dt4 fib-table FIB
+```
+
+For example, the below commands configure D5:: as the SID instantiates `t.m.gtp4.dt4` function. A steering policy for packets destine to 172.20.0.1 binds to the SID.
+
+```
+sr steer l3 172.20.0.1/32 via bsid D5::
+sr policy add bsid D5:: behavior t.m.gtp4.dt4 fib-table 0
+```
+
+In addition, inner IPv6, or mix of IPv4 and IPv6 inner packet cases require the function to be configured with local-fib table.
+
+- LOCAL-FIB: fib-table number for lookup and forward GTP-U packet based on outer IP destination address
+
+This is inner IPv6 case specific. The reason is that GTP-U encapsulates link local IPv6 packet for NDP (Neighber Discovery Protocol). Outer GTP-U header should be kept until the packets reach to the node responsible for NDP handling. It is typically UPF(User Plane Function) node.
+
+The following command instantiate a new T.M.GTP4.DT6 function.
+
+```
+sr policy add bsid D5:: behavior t.m.gtp4.dt6 fib-table 0 local-fib-table LOCAL-FIB
+```
+
+Following example configures fib 0 for inner packet and fib 1 for outer GTP-U packet forwarding:
+
+```
+sr policy add bsid D5:: behavior t.m.gtp4.dt6 fib-table 0 local-fib-table 1
+```
+
+If you need to suport both IPv4 and IPv6 inner packet lookup with just one SID, you can configure `t.m.gtp4.dt46` function:
+
+```
+sr policy add bsid D5:: behavior t.m.gtp4.dt46 fib-table 0 local-fib-table 1
+```
+
+In case of GTP-U over IPv6 case, `end.m.gtp6.dt4`, `end.m.gtp6.dt6` and `end.m.gtp6.dt46` functions support inner IPv4, IPv6 and IPv4/IPv6 lookup and forwarding respectively. Specifiyng fib table for inner IP packet forwarding is required as same as GTP-U over IPv4 case, and local-fib table for inner IPv6 and IPv4/IPv6 cases as well.
+
+```
+sr localsid prefix D::/64 behavior end.m.gtp6.dt46 fib-table 0 local-fib-table 0
+```
+
To run some demo setup please refer to: @subpage srv6_mobile_runner_doc