Add a vpp-dpdk-dev package, enable plugins to use dpdk APIs directly - vpp

diff options

author	Dave Barach <dave@barachs.net>	2016-02-01 12:05:52 -0500
committer	Dave Barach <dave@barachs.net>	2016-02-01 12:06:04 -0500
commit	74574228b0f63a3c8fd373321ed25f4d24308df0 (patch)
tree	7876bc41a773b1a379c1b1835c4eb05a94a47d3e /build-root/deb
parent	67ba3bed006c8fdaec5cbee897843d54cf2f538d (diff)

Add a vpp-dpdk-dev package, enable plugins to use dpdk APIs directly

Change-Id: I69db06a0b5d5d556c2fd570ea0056bb59d7bc3d6 Signed-off-by: Dave Barach <dave@barachs.net>

Diffstat (limited to 'build-root/deb')

-rw-r--r--

build-root/deb/debian/.gitignore

-rw-r--r--

build-root/deb/debian/control

2 files changed, 9 insertions, 8 deletions

# Copyright (c) 2017 Cisco and/or its affiliates. # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at: # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. *** Settings *** | Resource | resources/libraries/robot/performance/performance_setup.robot | ... | Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC | ... | NIC_Intel-X520-DA2 | ETH | IP6FWD | SCALE | FIB_20K | ... | Suite Setup | Set up 3-node performance topology with DUT's NIC model | ... | L3 | Intel-X520-DA2 | Suite Teardown | Tear down 3-node performance topology | ... | Test Setup | Set up performance test | ... | Test Teardown | Tear down performance discovery test | ${min_rate}pps | ... | ${framesize} | ${traffic_profile} | ... | Documentation | *RFC2544: Pkt throughput IPv6 routing test cases* | ... | ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology | ... | with single links between nodes. | ... | *[Enc] Packet Encapsulations:* Eth-IPv6 for IPv6 routing. | ... | *[Cfg] DUT configuration:* DUT1 and DUT2 are configured with IPv6 | ... | routing and 2x10k static IPv6 /64 route entries. DUT1 and DUT2 tested | ... | with 2p10GE NIC X520 Niantic by Intel. | ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop | ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop | ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage | ... | of packets transmitted. NDR and PDR are discovered for different | ... | Ethernet L2 frame sizes using either binary search or linear search | ... | algorithms with configured starting rate and final step that determines | ... | throughput measurement resolution. Test packets are generated by TG on | ... | links to DUTs. TG traffic profile contains two L3 flow-groups | ... | (flow-group per direction, 10k flows per flow-group) with all packets | ... | containing Ethernet header, IPv6 header withq IP and static payload. | ... | MAC addresses are matching MAC addresses of the TG node interfaces. | ... | Incrementing of IP.dst (IPv6 destination address) field is applied to | ... | both streams. | ... | *[Ref] Applicable standard specifications:* RFC2544. *** Variables *** # X520-DA2 bandwidth limit | ${s_limit} | ${10000000000} | ${rts_per_flow}= | ${10000} # Traffic profile: | ${traffic_profile} | trex-sl-3n-ethip6-ip6dst${rts_per_flow} *** Test Cases *** | tc01-78B-1t1c-ethip6-ip6scale20k-ndrdisc | | [Documentation] | | ... | [Cfg] DUT runs IPv6 routing config with 1 phy core, \ | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 78 Byte frames | | ... | using binary search start at 10GE linerate, step 50kpps. | | [Tags] | 78B | 1C | NDRDISC | | ${framesize}= | Set Variable | ${78} | | ${min_rate}= | Set Variable | ${50000} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology | | ... | ${rts_per_flow} | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} | tc02-78B-1t1c-ethip6-ip6scale20k-pdrdisc | | [Documentation] | | ... | [Cfg] DUT runs IPv6 routing config with 1 phy core, \ | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 78 Byte frames | | ... | using binary search start at 10GE linerate, step 50kpps, LT=0.5%. | | [Tags] | 78B | 1C | PDRDISC | SKIP_PATCH | | ${framesize}= | Set Variable | ${78} | | ${min_rate}= | Set Variable | ${50000} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology | | ... | ${rts_per_flow} | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} | | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} | tc03-1518B-1t1c-ethip6-ip6scale20k-ndrdisc | | [Documentation] | | ... | [Cfg] DUT runs IPv6 routing config with 1 phy core, \ | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames | | ... | using binary search start at 10GE linerate, step 50kpps. | | [Tags] | 1518B | 1C | NDRDISC | | ${framesize}= | Set Variable | ${1518} | | ${min_rate}= | Set Variable | ${50000} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology | | ... | ${rts_per_flow} | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} | tc04-1518B-1t1c-ethip6-ip6scale20k-pdrdisc | | [Documentation] | | ... | [Cfg] DUT runs IPv6 routing config with 1 phy core, \ | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames | | ... | using binary search start at 10GE linerate, step 50kpps, LT=0.5%. | | [Tags] | 1518B | 1C | PDRDISC | SKIP_PATCH | | ${framesize}= | Set Variable | ${1518} | | ${min_rate}= | Set Variable | ${50000} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology | | ... | ${rts_per_flow} | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} | | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} | tc05-9000B-1t1c-ethip6-ip6scale20k-ndrdisc | | [Documentation] | | ... | [Cfg] DUT runs IPv6 routing config with 1 phy core, \ | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames | | ... | using binary search start at 10GE linerate, step 10kpps. | | [Tags] | 9000B | 1C | NDRDISC | | ${framesize}= | Set Variable | ${9000} | | ${min_rate}= | Set Variable | ${10000} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology | | ... | ${rts_per_flow} | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} | tc06-9000B-1t1c-ethip6-ip6scale20k-pdrdisc | | [Documentation] | | ... | [Cfg] DUT runs IPv6 routing config with 1 phy core, \ | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames | | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. | | [Tags] | 9000B | 1C | PDRDISC | SKIP_PATCH | | ${framesize}= | Set Variable | ${9000} | | ${min_rate}= | Set Variable | ${10000} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add worker threads and rxqueues to all DUTs | 1 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology | | ... | ${rts_per_flow} | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} | | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} | tc07-78B-2t2c-ethip6-ip6scale20k-ndrdisc | | [Documentation] | | ... | [Cfg] DUT runs IPv6 routing config with 2 phy cores, \ | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 78 Byte frames | | ... | using binary search start at 10GE linerate, step 50kpps. | | [Tags] | 78B | 2C | NDRDISC | | ${framesize}= | Set Variable | ${78} | | ${min_rate}= | Set Variable | ${50000} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology | | ... | ${rts_per_flow} | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} | tc08-78B-2t2c-ethip6-ip6scale20k-pdrdisc | | [Documentation] | | ... | [Cfg] DUT runs IPv6 routing config with 2 phy cores, \ | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 78 Byte frames | | ... | using binary search start at 10GE linerate, step 50kpps, LT=0.5%. | | [Tags] | 78B | 2C | PDRDISC | SKIP_PATCH | | ${framesize}= | Set Variable | ${78} | | ${min_rate}= | Set Variable | ${50000} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology | | ... | ${rts_per_flow} | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} | | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} | tc09-1518B-2t2c-ethip6-ip6scale20k-ndrdisc | | [Documentation] | | ... | [Cfg] DUT runs IPv6 routing config with 2 phy cores, \ | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 1518 Byte frames | | ... | using binary search start at 10GE linerate, step 50kpps. | | [Tags] | 1518B | 2C | NDRDISC | SKIP_PATCH | | ${framesize}= | Set Variable | ${1518} | | ${min_rate}= | Set Variable | ${50000} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology | | ... | ${rts_per_flow} | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} | tc10-1518B-2t2c-ethip6-ip6scale20k-pdrdisc | | [Documentation] | | ... | [Cfg] DUT runs IPv6 routing config with 2 phy cores, \ | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 1518 Byte frames | | ... | using binary search start at 10GE linerate, step 50kpps, LT=0.5%. | | [Tags] | 1518B | 2C | PDRDISC | SKIP_PATCH | | ${framesize}= | Set Variable | ${1518} | | ${min_rate}= | Set Variable | ${50000} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology | | ... | ${rts_per_flow} | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} | | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} | tc11-9000B-2t2c-ethip6-ip6scale20k-ndrdisc | | [Documentation] | | ... | [Cfg] DUT runs IPv6 routing config with 2 phy cores, \ | | ... | 1 receive queue per NIC port. [Ver] Find NDR for 9000 Byte frames | | ... | using binary search start at 10GE linerate, step 10kpps. | | [Tags] | 9000B | 2C | NDRDISC | SKIP_PATCH | | ${framesize}= | Set Variable | ${9000} | | ${min_rate}= | Set Variable | ${10000} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology | | ... | ${rts_per_flow} | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} | tc12-9000B-2t2c-ethip6-ip6scale20k-pdrdisc | | [Documentation] | | ... | [Cfg] DUT runs IPv6 routing config with 2 phy cores, \ | | ... | 1 receive queue per NIC port. [Ver] Find PDR for 9000 Byte frames | | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. | | [Tags] | 9000B | 2C | PDRDISC | SKIP_PATCH | | ${framesize}= | Set Variable | ${9000} | | ${min_rate}= | Set Variable | ${10000} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add worker threads and rxqueues to all DUTs | 2 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology | | ... | ${rts_per_flow} | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} | | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} | tc13-78B-4t4c-ethip6-ip6scale20k-ndrdisc | | [Documentation] | | ... | [Cfg] DUT runs IPv6 routing config with 4 phy cores, \ | | ... | 2 receive queues per NIC port. [Ver] Find NDR for 78 Byte frames | | ... | using binary search start at 10GE linerate, step 50kpps. | | [Tags] | 78B | 4C | NDRDISC | | ${framesize}= | Set Variable | ${78} | | ${min_rate}= | Set Variable | ${50000} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology | | ... | ${rts_per_flow} | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} | tc14-78B-4t4c-ethip6-ip6scale20k-pdrdisc | | [Documentation] | | ... | [Cfg] DUT runs IPv6 routing config with 4 phy cores, \ | | ... | 2 receive queues per NIC port. [Ver] Find PDR for 78 Byte frames | | ... | using binary search start at 10GE linerate, step 50kpps, LT=0.5%. | | [Tags] | 78B | 4C | PDRDISC | SKIP_PATCH | | ${framesize}= | Set Variable | ${78} | | ${min_rate}= | Set Variable | ${50000} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology | | ... | ${rts_per_flow} | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} | | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} | tc15-1518B-4t4c-ethip6-ip6scale20k-ndrdisc | | [Documentation] | | ... | [Cfg] DUT runs IPv6 routing config with 4 phy cores, \ | | ... | 2 receive queues per NIC port. [Ver] Find NDR for 1518 Byte frames | | ... | using binary search start at 10GE linerate, step 50kpps. | | [Tags] | 1518B | 4C | NDRDISC | SKIP_PATCH | | ${framesize}= | Set Variable | ${1518} | | ${min_rate}= | Set Variable | ${50000} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology | | ... | ${rts_per_flow} | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} | tc16-1518B-4t4c-ethip6-ip6scale20k-pdrdisc | | [Documentation] | | ... | [Cfg] DUT runs IPv6 routing config with 4 phy cores, \ | | ... | 2 receive queues per NIC port. [Ver] Find PDR for 1518 Byte frames | | ... | using binary search start at 10GE linerate, step 50kpps, LT=0.5%. | | [Tags] | 1518B | 4C | PDRDISC | SKIP_PATCH | | ${framesize}= | Set Variable | ${1518} | | ${min_rate}= | Set Variable | ${50000} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Add no multi seg to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology | | ... | ${rts_per_flow} | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} | | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type} | tc17-9000B-4t4c-ethip6-ip6scale20k-ndrdisc | | [Documentation] | | ... | [Cfg] DUT runs IPv6 routing config with 4 phy cores, \ | | ... | 2 receive queues per NIC port. [Ver] Find NDR for 9000 Byte frames | | ... | using binary search start at 10GE linerate, step 10kpps. | | [Tags] | 9000B | 4C | NDRDISC | SKIP_PATCH | | ${framesize}= | Set Variable | ${9000} | | ${min_rate}= | Set Variable | ${10000} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology | | ... | ${rts_per_flow} | | Then Find NDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} | tc18-9000B-4t4c-ethip6-ip6scale20k-pdrdisc | | [Documentation] | | ... | [Cfg] DUT runs IPv6 routing config with 4 phy cores, \ | | ... | 2 receive queues per NIC port. [Ver] Find PDR for 9000 Byte frames | | ... | using binary search start at 10GE linerate, step 10kpps, LT=0.5%. | | [Tags] | 9000B | 4C | PDRDISC | SKIP_PATCH | | ${framesize}= | Set Variable | ${9000} | | ${min_rate}= | Set Variable | ${10000} | | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize} | | ${binary_min}= | Set Variable | ${min_rate} | | ${binary_max}= | Set Variable | ${max_rate} | | ${threshold}= | Set Variable | ${min_rate} | | Given Add worker threads and rxqueues to all DUTs | 4 | | And Add PCI devices to all DUTs | | And Apply startup configuration on all VPP DUTs | | And Initialize IPv6 forwarding with scaling in 3-node circular topology | | ... | ${rts_per_flow} | | Then Find PDR using binary search and pps | ${framesize} | ${binary_min} | | ... | ${binary_max} | ${traffic_profile} | | ... | ${min_rate} | ${max_rate} | ${threshold} | | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}


context:
space:
mode: