docs: Incororate Scott's overall review

Change-Id: Ic70a62e17891fa9291a5274400ae89f1d6194b6e
Signed-off-by: John DeNisco <jdenisco@cisco.com>

17 files changed, 129 insertions, 73 deletions

diff --git a/docs/gettingstarted/developers/index.rst b/docs/gettingstarted/developers/index.rst
index cccb18d731a..165488c7a31 100644
--- a/docs/gettingstarted/developers/index.rst
+++ b/docs/gettingstarted/developers/index.rst
@@ -4,6 +4,14 @@
 Developers
 ##########
 
+The Developers section covers the following areas:
+
+* Building VPP
+* Describes the components of the four VPP layers
+* How to Create, Add, Enable/Disable features
+* Discusses different aspects of Bounded-index Extensible Hashing (bihash)
+
+
 .. toctree::
    :maxdepth: 2
 
diff --git a/docs/gettingstarted/index.rst b/docs/gettingstarted/index.rst
index 754796b670b..acee1963af5 100644
--- a/docs/gettingstarted/index.rst
+++ b/docs/gettingstarted/index.rst
@@ -1,8 +1,31 @@
 .. _gettingstarted:
 
-###############
-Getting Started
-###############
+######################
+Getting Started Guides
+######################
+
+The Getting Started Guide is comprised of several different sections; a section for Users,  another for Developers, and a section for Writing VPP documentation.
+
+The Users section covers basic VPP installation and configuration operations. This section covers the following areas:
+
+* Describes the different types of VPP packages
+* Describes how to install VPP Binaries on different OS platforms (Ubuntu, Centos, openSUSE).
+* Explains how to configure, then use VPP.
+* Explains how to use the Configuration Utility.
+
+The Developers section covers the following areas:
+
+* Building VPP
+* Describes the components of the four VPP layers
+* How to Create, Add, Enable/Disable features
+* Discusses different aspects of Bounded-index Extensible Hashing (bihash)
+
+The Writing VPP Documentation section covers the following topics:
+
+* How to build VPP documents
+* How to push your changes to the VPP Docs Repository
+* Identifies the different styles associated to reStructuredText
+* Identifies the different styles associated to Markdown
 
 .. toctree::
    :maxdepth: 2
diff --git a/docs/gettingstarted/users/configuring/hugepages.rst b/docs/gettingstarted/users/configuring/hugepages.rst
index 42f6aa30282..76ac7d0807d 100644
--- a/docs/gettingstarted/users/configuring/hugepages.rst
+++ b/docs/gettingstarted/users/configuring/hugepages.rst
@@ -3,11 +3,12 @@
 Huge Pages
 ----------
 
-VPP requires *'hugepages'* to run. VPP will overwrite existing hugepage
-settings when VPP is installed. By default, VPP sets the number of hugepages on
-a system to 1024 2M hugepages (1G hugepages are no longer supported). This is
-the number of hugepages on the system, not just used by VPP. When VPP is
-installed, the following file is copied to the system and used to apply the
+VPP requires *'hugepages'* to run. VPP will overwrite existing hugepage settings
+when VPP is installed. By default, VPP sets the number of hugepages on a system
+to 1024 2M hugepages (1G hugepages are no longer supported). This is the number
+of hugepages on the system, not just used by VPP. 
+
+When VPP is installed, the following file is copied to the system and used to apply the
 hugepage settings on VPP installation and system reboot:
 
 .. code-block:: console
diff --git a/docs/gettingstarted/users/configuring/index.rst b/docs/gettingstarted/users/configuring/index.rst
index 75c5276d8a5..f1244c61a4f 100644
--- a/docs/gettingstarted/users/configuring/index.rst
+++ b/docs/gettingstarted/users/configuring/index.rst
@@ -1,10 +1,10 @@
 .. _configuring:
 
 Configuring VPP
-===============
+==================
 
-There is some basic configuration that is need to run FD.io VPP. This section
-will describe some basic configuration. 
+There is some basic configuration that is needed to run FD.io VPP.  This section
+describes the basic configuration:
 
 .. toctree::
    :maxdepth: 2
diff --git a/docs/gettingstarted/users/configuring/startup.rst b/docs/gettingstarted/users/configuring/startup.rst
index 7dd2c996a80..8ce27eb676d 100644
--- a/docs/gettingstarted/users/configuring/startup.rst
+++ b/docs/gettingstarted/users/configuring/startup.rst
@@ -10,9 +10,10 @@ VPP Configuration File - 'startup.conf'
 
 
 After a successful installation, VPP installs a startup config file named
-*'startup.conf'* in the *'/etc/vpp/'*' directory. This file can be tailored to
+*startup.conf* in the */etc/vpp/* directory. This file can be tailored to
 make VPP run as desired, but contains default values for typical installations.
-Below are more details about this file and parameter and values it contains.
+
+Below are more details about this file and the parameters and values it contains.
 
 Introduction
 ------------
diff --git a/docs/gettingstarted/users/configutil/commandfour.rst b/docs/gettingstarted/users/configutil/commandfour.rst
index 27cac824e4a..6a1b82e1da5 100644
--- a/docs/gettingstarted/users/configutil/commandfour.rst
+++ b/docs/gettingstarted/users/configutil/commandfour.rst
@@ -4,11 +4,11 @@
 List/Install/Uninstall VPP
 **************************
 
-With option "4" the user can list, install or uninstall the FD.io VPP packages. If there
-are packages already installed, the packages will be listed and then the user will be asked
-if the packages should be uninstalled. If no packages are installed the user will be asked if
-the FD.io packages should be installed. The packages installed will be the latest released
-packages.
+With command option "4" the user can list, install, or uninstall the FD.io VPP
+packages. If there are packages already installed, then the packages will be listed
+and the user will be asked if the packages should be uninstalled. If no packages are
+installed, then the user will be asked if the FD.io packages should be installed. The
+packages installed will be the latest released packages.
 
 Uninstalling the packages:
 
diff --git a/docs/gettingstarted/users/configutil/commandone.rst b/docs/gettingstarted/users/configutil/commandone.rst
index 9d63809b96b..33b6dbb04ce 100644
--- a/docs/gettingstarted/users/configutil/commandone.rst
+++ b/docs/gettingstarted/users/configutil/commandone.rst
@@ -4,9 +4,9 @@
 Show System Information
 ***********************
 
-With option "1" the user can inspect the system characteristics.
+With command option "1" the user can inspect the system characteristics.
 
-This example shows a system that VPP has not yet been installed.
+This example shows a system that has not yet had VPP installed.
 
 .. code-block:: console
 
diff --git a/docs/gettingstarted/users/configutil/commandthree.rst b/docs/gettingstarted/users/configutil/commandthree.rst
index c4c44292fd0..589a3671acf 100644
--- a/docs/gettingstarted/users/configutil/commandthree.rst
+++ b/docs/gettingstarted/users/configutil/commandthree.rst
@@ -1,13 +1,14 @@
 .. _config-command-three:
 
-***********************
+************************
 Apply the Configuration
-***********************
+************************
 
-After the configuration files have been examined and are correct. The configuration
-can be applied. After the configuration is applied use option "1" to check the
-system configuration. Notice the default is NOT to change the grub file. If the option
-to change the grub command line is selected a reboot of the system will be required.
+After the configuration files have been examined and verified as correct, then the
+configuration can be applied by using command option '3'. After the configuration
+is applied, use option "1" to check the system configuration. Notice the default is
+NOT to change the grub file. If the option to change the grub command line is selected,
+then a reboot of the system will be required.
 
 .. code-block:: console
 
diff --git a/docs/gettingstarted/users/configutil/commandtwo.rst b/docs/gettingstarted/users/configutil/commandtwo.rst
index 0d06c1410e5..c30663f5df9 100644
--- a/docs/gettingstarted/users/configutil/commandtwo.rst
+++ b/docs/gettingstarted/users/configutil/commandtwo.rst
@@ -4,10 +4,12 @@
 Dry Run
 *******
 
-With the config utility dry run option the important configuration files are created
-so that the user can examine them and then if they look reasonable apply them with
-option 3. The files for **Ubuntu** can be found in the root directory /usr/local/vpp/vpp-config/dryrun
-and for **Centos** in /usr/vpp/vpp-config/dryrun.
+With command option '2' (the config utility *dry run* option) the important
+configuration files are created so that the user can examine them, and then
+if they look reasonable apply them with command option 3. 
+
+The files for **Ubuntu** can be found in the root directory */usr/local/vpp/vpp-config/dryrun*
+and for **Centos** in directory */usr/vpp/vpp-config/dryrun*.
 
 The important configuration files are **/etc/vpp/startup.conf**, **/etc/sysctl.d/80-vpp.conf**,
 and **/etc/default/grub** 
@@ -15,32 +17,32 @@ and **/etc/default/grub**
 Startup.conf
 ============
 
-FD.io VPP startup parameters are configured in the file **/etc/vpp/startup.conf**. The
-utility creates this file under the vpp-config root directory in vpp/startup.conf.
-the values in this file come from the questions asked about the devices, cores, rx queues,
+FD.io VPP startup parameters are configured in the file **/etc/vpp/startup.conf**.
+The utility creates this file under the *vpp-config* root directory in the file *vpp/startup.conf*.
+The values in this file come from the questions asked about the devices, cores, rx queues,
 and tcp parameters.
 
 80-vpp.conf
-===========
+============
 
 The huge page configuration comes by setting values in the file **/etc/sysctl.d/80-vpp.conf**.
-The utility creates the file under the root directory in sysctl.d/80-vpp.conf. When asked the
-question about huge pages the correct values are put in the dryrin file.
+The utility creates the file under the root directory in the file *sysctl.d/80-vpp.conf*. When asked the
+question about huge pages the correct values are put in the dryrun file.
 
 grub
 ====
 
-CPUs can be isolated for use by VPP or other processes such as VMs using the grub configuration
-file. This file is **/etc/default/grub**. This file must be modified with care. It is possible to
-make your system unusable if this file is modified incorrectly. The dry run file is located under
-the vpp-config root directory and then default.
+CPUs can be isolated for use by VPP or other processes such as VMs using the grub
+configuration file. This file is **/etc/default/grub**. This file must be modified with
+care. It is possible to make your system unusable if this file is modified incorrectly.
+The dry run file is located under the *vpp-config* root directory and then default.
 
-*********************
+***********************
 Executing the Dry Run
-*********************
+***********************
 
-The following is an example of how to execute a dry run. Defaults should be picked first and then
-the values increased accordingly.
+The following is an example of how to execute a dry run. Defaults should be picked first,
+and then the values increased accordingly.
 
 .. code-block:: console
 
diff --git a/docs/gettingstarted/users/configutil/usingvppconfig.rst b/docs/gettingstarted/users/configutil/usingvppconfig.rst
index 4f1ce6c3c30..8694a83341f 100644
--- a/docs/gettingstarted/users/configutil/usingvppconfig.rst
+++ b/docs/gettingstarted/users/configutil/usingvppconfig.rst
@@ -8,14 +8,15 @@ The vpp-config utility provides the user with several different menus. This allo
 user to configure ports, some performance characteristics, the number of huge pages
 and install/uninstall the released FD.io packages.
 
-It is recommended that the menu options are executed in this order.
+It is recommended that the menu command options, noted below as *"x)"*, are run in
+this order (command option 4 first, then options 1,2,3):
 
 #. :ref:`4) List/Install/Uninstall VPP <config-command-four>`
 #. :ref:`1) Show basic system information <config-command-one>`
 #. :ref:`2) Dry Run <config-command-two>`
 #. :ref:`3) Full Configuration <config-command-three>`
 
-Once vpp-config is installed as a root user execute the following
+Once vpp-config is installed as a root user, then run the following code:
 
 .. code-block:: console
 
@@ -44,8 +45,8 @@ Once vpp-config is installed as a root user execute the following
 Default Values
 ==============
 
-If you do not choose to modify the default for any of the questions prompted by vpp-config,
-you may press the ENTER key to select the default options:
+If you do not choose to modify the default for any of the questions prompted by vpp-config, then
+you may press the **ENTER** key to select the default options:
 
 * Questions that ask [Y/n], the capital letter Y is the default answer.
 * Numbers have their default within brackets, such as in [1024], the 1024 is the default.   
diff --git a/docs/gettingstarted/users/index.rst b/docs/gettingstarted/users/index.rst
index 6fd7260650a..36640a8b454 100644
--- a/docs/gettingstarted/users/index.rst
+++ b/docs/gettingstarted/users/index.rst
@@ -1,8 +1,16 @@
 .. _users:
 
-#####
+########
 Users
-#####
+########
+
+The Users section covers basic VPP installation and configuration operations. This
+section covers the following areas:
+
+* Describes the different types of VPP packages 
+* Describes how to install VPP Binaries on different OS platforms (Ubuntu, Centos, openSUSE)
+* Explains how to configure, then use VPP
+* Explains how to use the Configuration Utility
 
 .. toctree::
    :maxdepth: 2
diff --git a/docs/gettingstarted/users/installing/centos.rst b/docs/gettingstarted/users/installing/centos.rst
index bb69eb9e797..470ca87be1f 100644
--- a/docs/gettingstarted/users/installing/centos.rst
+++ b/docs/gettingstarted/users/installing/centos.rst
@@ -8,7 +8,7 @@ Setup the fd.io Repository - Centos 7
 Update the OS
 -------------
 
-It is probably a good idea to update and upgrade the OS before starting:
+Before starting the repository setup, it is a good idea to first update and upgrade the OS.
 
 .. code-block:: console
 
diff --git a/docs/gettingstarted/users/installing/index.rst b/docs/gettingstarted/users/installing/index.rst
index 7636ec875fd..6cadae0a314 100644
--- a/docs/gettingstarted/users/installing/index.rst
+++ b/docs/gettingstarted/users/installing/index.rst
@@ -3,11 +3,10 @@
 .. toctree::
 
 Installing VPP from Packages
-============================
+==============================
 
-If you are simply using vpp, it can be convenient to install the binaries from
-existing packages. This guide will describe how pull, install and run the VPP
-packages.
+If you want to use VPP it can be convenient to install the binaries from
+existing packages. This guide describes how to pull, install and run the VPP packages.
 
 .. toctree::
 
@@ -20,10 +19,13 @@ The following is a brief description of the packages to be installed with VPP.
    packages
 
 Installing VPP Binaries
------------------------
+----------------------------------
+
+This section provides directions on how to Install VPP binaries on Ubuntu, Centos,
+and openSUSE platforms.
 
 Installing on Ubuntu
-^^^^^^^^^^^^^^^^^^^^
+^^^^^^^^^^^^^^^^^^^^^
 The following are instructions on how to install VPP on Ubuntu.
 
 .. toctree::
diff --git a/docs/gettingstarted/users/installing/opensuse.rst b/docs/gettingstarted/users/installing/opensuse.rst
index 8e91ebd2f45..b5dcbc35820 100644
--- a/docs/gettingstarted/users/installing/opensuse.rst
+++ b/docs/gettingstarted/users/installing/opensuse.rst
@@ -4,17 +4,18 @@
 
 Installing
 ==========
-Top install VPP on openSUSE first pick the following release and execute the appropriate commands.
+To install VPP on openSUSE, first install the following release and then execute
+the appropriate commands.
 
 openSUSE Tumbleweed (rolling release)
--------------------------------------
+------------------------------------------------------------
 
 .. code-block:: console
 
    sudo zypper install vpp vpp-plugins
 
 openSUSE Leap 42.3
-------------------
+--------------------------------
 
 .. code-block:: console
 
diff --git a/docs/gettingstarted/users/installing/packages.rst b/docs/gettingstarted/users/installing/packages.rst
index d67ff605d99..55ddf05fdad 100644
--- a/docs/gettingstarted/users/installing/packages.rst
+++ b/docs/gettingstarted/users/installing/packages.rst
@@ -1,7 +1,9 @@
 .. _packages:
 
 Packages
-========
+==========
+
+This section identifies the different VPP packages and describes their contents.
 
 .. toctree::
 
diff --git a/docs/gettingstarted/users/installing/ubuntu.rst b/docs/gettingstarted/users/installing/ubuntu.rst
index 9c082e667b0..5b4a1d86fee 100644
--- a/docs/gettingstarted/users/installing/ubuntu.rst
+++ b/docs/gettingstarted/users/installing/ubuntu.rst
@@ -3,13 +3,13 @@
 .. toctree::
  
 Ubuntu 16.04 - Setup the fd.io Repository
-=========================================
+==========================================
 
-From the following choose one of the releases to install.
+From the following, choose one of the releases to install.
 
 
 Update the OS
--------------
+-----------------------
 
 It is probably a good idea to update and upgrade the OS before starting
 
@@ -19,7 +19,7 @@ It is probably a good idea to update and upgrade the OS before starting
 
 
 Point to the Repository
------------------------
+-----------------------------------
 
 Create a file **"/etc/apt/sources.list.d/99fd.io.list"** with the contents that point to
 the version needed. The contents needed are shown below.
@@ -27,7 +27,7 @@ the version needed. The contents needed are shown below.
 .. _install_vpp:
 
 VPP latest Release
-^^^^^^^^^^^^^^^^^^
+^^^^^^^^^^^^^^^^^^^
 
 Create the file **/etc/apt/sources.list.d/99fd.io.list** with contents:
 
@@ -37,7 +37,7 @@ Create the file **/etc/apt/sources.list.d/99fd.io.list** with contents:
 
 
 VPP stable/1804 Branch
-^^^^^^^^^^^^^^^^^^^^^^
+^^^^^^^^^^^^^^^^^^^^^^^
 
 Create the file **/etc/apt/sources.list.d/99fd.io.list** with contents:
 
@@ -47,7 +47,7 @@ Create the file **/etc/apt/sources.list.d/99fd.io.list** with contents:
 
 
 VPP master Branch
-^^^^^^^^^^^^^^^^^
+^^^^^^^^^^^^^^^^^^^^
 
 Create the file **/etc/apt/sources.list.d/99fd.io.list** with contents:
 
@@ -57,7 +57,7 @@ Create the file **/etc/apt/sources.list.d/99fd.io.list** with contents:
 
 
 Install the Mandatory Packages
-==============================
+===============================
 
 .. code-block:: console
 
@@ -66,7 +66,7 @@ Install the Mandatory Packages
 
 
 Install the Optional Packages
-=============================
+==============================
 
 .. code-block:: console
 
diff --git a/docs/gettingstarted/writingdocs/index.rst b/docs/gettingstarted/writingdocs/index.rst
index e1ce767e40e..1361c422af7 100644
--- a/docs/gettingstarted/writingdocs/index.rst
+++ b/docs/gettingstarted/writingdocs/index.rst
@@ -4,6 +4,15 @@
 Writing VPP Documentation
 #########################
 
+This section covers the following topics:
+
+* Building VPP Documents
+* Merging FD.io VPP documents and performing a Git review
+* Using Read the Docs
+* reStructured Text Style Guide that describes different format styles
+* Markdown Style Guide that describes different format styles
+
+
 .. toctree::
 
   buildingrst
@@ -13,6 +22,3 @@ Writing VPP Documentation
   styleguidemd/index.rst
   todo
   pushingapatch
-
-
-