diff options
author | 2018-08-16 13:50:02 -0400 | |
---|---|---|
committer | 2018-08-17 17:28:28 +0000 | |
commit | c4c72d28352f74be5e3c78521e73ff64bbb78ea0 (patch) | |
tree | 2cb26ebd5206a6b8bb31eb3703f1ae8bbab6f6fc /docs/guides/progressivevpp/index.rst | |
parent | a60c3ed14b2cd2f63a1262b8935b823e081aeef7 (diff) |
docs: Rework the VPP progressive Tutorial.
Change-Id: If5b0d07ea90d978c6b1f11210a661876b7929653
Signed-off-by: John DeNisco <jdenisco@cisco.com>
Diffstat (limited to 'docs/guides/progressivevpp/index.rst')
-rw-r--r-- | docs/guides/progressivevpp/index.rst | 176 |
1 files changed, 0 insertions, 176 deletions
diff --git a/docs/guides/progressivevpp/index.rst b/docs/guides/progressivevpp/index.rst deleted file mode 100644 index 8be904dc911..00000000000 --- a/docs/guides/progressivevpp/index.rst +++ /dev/null @@ -1,176 +0,0 @@ -.. _progressivevpp: - -.. toctree:: - -######################## -Progressive VPP Tutorial -######################## - -Overview -======== - -Learn to run FD.io VPP on a single Ubuntu 16.04 VM using Vagrant with this walkthrough -covering basic FD.io VPP senarios. Useful FD.io VPP commands will be used, and -will discuss basic operations, and the state of a running FD.io VPP on a system. - -.. note:: - - This is *not* intended to be a 'How to Run in a Production Environment' set of instructions. - -.. _introduction-to-vpp-vagrant: - -Setting up your environment -=========================== - -All of these exercises are designed to be performed on an Ubuntu 16.04 (Xenial) box. - -* If you have an Ubuntu 16.04 box on which you have sudo or root access, you can feel free to use that. -* If you do not, a Vagrantfile is provided to setup a basic Ubuntu 16.04 box for you in the the steps below. - -Running Vagrant -=============== - -FD.io VPP runs in userspace. In a production environment you will often run it with DPDK to connect to real NICs or vhost to connect to VMs. -In those circumstances you usually run a single instance of FD.io VPP. - -For purposes of this tutorial, it is going to be extremely useful to run multiple instances of vpp, and connect them to each other to form -a topology. Fortunately, FD.io VPP supports this. - -When running multiple FD.io VPP instances, each instance needs to have specified a 'name' or 'prefix'. In the example below, the 'name' or 'prefix' is "vpp1". Note that only one instance can use the dpdk plugin, since this plugin is trying to acquire a lock on a file. - -.. toctree:: - - settingupenvironment.rst - -The DPDK Plugin will be disabled for this section. The link below demonstrates how this is done. - -.. toctree:: - - removedpdkplugin.rst - -Start a FD.io VPP shell using vppctl -==================================== - -The command *$ sudo vppctl* will launch a FD.io VPP shell with which you can run multiple FD.io VPP commands interactively by running: - -.. code-block:: console - - $ sudo vppctl - _______ _ _ _____ ___ - __/ __/ _ \ (_)__ | | / / _ \/ _ \ - _/ _// // / / / _ \ | |/ / ___/ ___/ - /_/ /____(_)_/\___/ |___/_/ /_/ - vpp# show ver - vpp v18.07-release built by root on c469eba2a593 at Mon Jul 30 23:27:03 UTC 2018 - -Create an Interface -=================== - -Skills to be Learned -^^^^^^^^^^^^^^^^^^^^ - -#. Create a veth interface in Linux host -#. Assign an IP address to one end of the veth interface in the Linux host -#. Create a vpp host-interface that connected to one end of a veth interface via AF_PACKET -#. Add an ip address to a vpp interface - -.. toctree:: - - interface.rst - -Traces -====== - -Skills to be Learned -^^^^^^^^^^^^^^^^^^^^ - -#. Setup a 'trace' -#. View a 'trace' -#. Clear a 'trace' -#. Verify using ping from host -#. Ping from vpp -#. Examine Arp Table -#. Examine ip fib - -.. toctree:: - - traces.rst - -Routing -======= - -Skills to be Learned -^^^^^^^^^^^^^^^^^^^^ - -In this exercise you will learn these new skills: - -#. Add route to Linux Host routing table -#. Add route to FD.io VPP routing table - -And revisit the old ones: - -#. Examine FD.io VPP routing table -#. Enable trace on vpp1 and vpp2 -#. ping from host to FD.io VPP -#. Examine and clear trace on vpp1 and vpp2 -#. ping from FD.io VPP to host -#. Examine and clear trace on vpp1 and vpp2 - - -.. toctree:: - - routing.rst - -Connecting Two FD.io VPP Instances -================================== - -memif is a very high performance, direct memory interface type which can -be used between FD.io VPP instances to form a topology. It uses a file socket -for a control channel to set up that shared memory. - -Skills to be Learned -^^^^^^^^^^^^^^^^^^^^ - -You will learn the following new skill in this exercise: - -#. Create a memif interface between two FD.io VPP instances - -You should be able to perform this exercise with the following skills -learned in previous exercises: - -#. Run a second FD.io VPP instance -#. Add an ip address to a FD.io VPP interface -#. Ping from FD.io VPP - -.. toctree:: - - twovppinstances.rst - -Switching -========= - -Skills to be Learned -^^^^^^^^^^^^^^^^^^^^ - -#. Associate an interface with a bridge domain -#. Create a loopback interaface -#. Create a BVI (Bridge Virtual Interface) for a bridge domain -#. Examine a bridge domain - -.. toctree:: - - switching.rst - -Source NAT -========== - -Skills to be Learned -^^^^^^^^^^^^^^^^^^^^ - -#. Abusing networks namespaces for fun and profit -#. Configuring snat address -#. Configuring snat inside and outside interfaces - -.. toctree:: - - sourceNAT.rst |