summaryrefslogtreecommitdiffstats
path: root/docs/reference/cmdreference
diff options
context:
space:
mode:
authorScott Keeler <skeeler@cisco.com>2018-10-23 15:16:46 -0400
committerDamjan Marion <dmarion@me.com>2018-10-24 15:21:20 +0000
commit70f28fc4b83fee72a1e2a17f5f898af83b4fb39c (patch)
tree2a8bc77cdc012af9f9b3321a7b27f46fbdf4725b /docs/reference/cmdreference
parent8a6928938c468639232350bccb0e6c4364fff4c4 (diff)
docs: add useful debug CLI
Change-Id: I5ef9ecd741f1623ae1b7a23fa0a4fa6db7e243a3 Signed-off-by: Scott Keeler <skeeler@cisco.com>
Diffstat (limited to 'docs/reference/cmdreference')
-rw-r--r--docs/reference/cmdreference/index.rst33
-rw-r--r--docs/reference/cmdreference/interface/basic.rst (renamed from docs/reference/cmdreference/interface/interface.rst)110
-rw-r--r--docs/reference/cmdreference/interface/create_interface.rst222
-rw-r--r--docs/reference/cmdreference/interface/hardware.rst83
-rw-r--r--docs/reference/cmdreference/interface/index.rst13
-rw-r--r--docs/reference/cmdreference/interface/setinterface.rst187
-rw-r--r--docs/reference/cmdreference/interface/subinterface.rst117
-rw-r--r--docs/reference/cmdreference/ip/index.rst12
-rw-r--r--docs/reference/cmdreference/ip/ip.rst145
-rw-r--r--docs/reference/cmdreference/show/index.rst12
-rw-r--r--docs/reference/cmdreference/show/show.rst283
-rw-r--r--docs/reference/cmdreference/trace/index.rst12
-rw-r--r--docs/reference/cmdreference/trace/trace.rst58
-rw-r--r--docs/reference/cmdreference/vhost/index.rst2
-rw-r--r--docs/reference/cmdreference/vhost/vhostuser.rst16
15 files changed, 1057 insertions, 248 deletions
diff --git a/docs/reference/cmdreference/index.rst b/docs/reference/cmdreference/index.rst
index 5c8effa3310..983517cf1ce 100644
--- a/docs/reference/cmdreference/index.rst
+++ b/docs/reference/cmdreference/index.rst
@@ -1,55 +1,60 @@
.. _cmdreference:
-Command Line Reference
-======================
-This is a reference guide for the vpp debug commands that are referenced in the within these documents. This is **NOT** a complete list. For a complete list refer to the Debug CLI section of the
+Useful Debug CLI
+==================
+
+This is a reference guide for the vpp debug commands that are referenced within these documents. This is **NOT** a complete list. For a complete list refer to the Debug CLI section of the
`Source Code Documents <https://docs.fd.io/vpp/18.07/clicmd.html>`_.
-The debug CLI can be executed from a su shell using the vppctl command.
+The debug CLI can be executed from an su shell using the vppctl command.
.. code-block:: console
# sudo bash
# vppctl show interface
- Name Idx State Counter Count
+ Name Idx State Counter Count
TenGigabitEthernet86/0/0 1 up rx packets 6569213
rx bytes 9928352943
tx packets 50384
tx bytes 3329279
- TenGigabitEthernet86/0/1 2 down
+ TenGigabitEthernet86/0/1 2 down
VirtualEthernet0/0/0 3 up rx packets 50384
rx bytes 3329279
tx packets 6569213
tx bytes 9928352943
drops 1498
- local0 0 down
+ local0 0 down
Commands can also be executed from the vppct shell.
.. code-block:: console
# vppctl
- _______ _ _ _____ ___
+ _______ _ _ _____ ___
__/ __/ _ \ (_)__ | | / / _ \/ _ \
_/ _// // / / / _ \ | |/ / ___/ ___/
- /_/ /____(_)_/\___/ |___/_/ /_/
-
- vpp# show interface
- Name Idx State Counter Count
+ /_/ /____(_)_/\___/ |___/_/ /_/
+
+ vpp# show interface
+ Name Idx State Counter Count
TenGigabitEthernet86/0/0 1 up rx packets 6569213
rx bytes 9928352943
tx packets 50384
tx bytes 3329279
- TenGigabitEthernet86/0/1 2 down
+ TenGigabitEthernet86/0/1 2 down
VirtualEthernet0/0/0 3 up rx packets 50384
rx bytes 3329279
tx packets 6569213
tx bytes 9928352943
drops 1498
- local0 0 down
+ local0 0 down
.. toctree::
+ :maxdepth: 3
interface/index.rst
+ ip/index.rst
+ show/index.rst
+ trace/index.rst
vhost/index.rst
diff --git a/docs/reference/cmdreference/interface/interface.rst b/docs/reference/cmdreference/interface/basic.rst
index a3429037e8b..9848005502e 100644
--- a/docs/reference/cmdreference/interface/interface.rst
+++ b/docs/reference/cmdreference/interface/basic.rst
@@ -1,15 +1,22 @@
-.. _intcommands:
-
-Interface Commands
-==================
+.. _interface:
.. toctree::
+Basic Interface Commands
+=========================
+
+There are several commands that are associated to Basic Interface:
+
+* `Show Interface`_
+* `Clear Interfaces`_
+
+.. note:: For a complete list of CLI Debug commands refer to the Debug CLI section of the `Source Code Documents <https://docs.fd.io/vpp/18.07/clicmd.html>`_ .
+
.. _showintcommand:
Show Interface
-==============
-Shows software interface information including counters and features
+++++++++++++++++
+Shows software interface information including counters and features.
Summary/Usage
-------------
@@ -26,18 +33,18 @@ Example of how to show the interface counters:
.. code-block:: console
vpp# show int
- Name Idx State Counter Count
+ Name Idx State Counter Count
TenGigabitEthernet86/0/0 1 up rx packets 6569213
rx bytes 9928352943
tx packets 50384
tx bytes 3329279
- TenGigabitEthernet86/0/1 2 down
+ TenGigabitEthernet86/0/1 2 down
VirtualEthernet0/0/0 3 up rx packets 50384
rx bytes 3329279
tx packets 6569213
tx bytes 9928352943
drops 1498
- local0 0 down
+ local0 0 down
Example of how to display the interface placement:
@@ -62,7 +69,7 @@ Example of how to display the interface placement:
VirtualEthernet0/0/13 queue 3 (polling)
Clear Interfaces
-================
++++++++++++++++++
Clear the statistics for all interfaces (statistics associated with the
'*show interface*' command).
@@ -80,86 +87,3 @@ Example of how to clear the statistics for all interfaces:
.. code-block:: console
vpp# clear interfaces
-
-Set Interface Mac Address
-=========================
-The '*set interface mac address* ' command allows to set MAC address of
-given interface. In case of NIC interfaces the one has to support MAC
-address change. A side effect of MAC address change are changes of MAC
-addresses in FIB tables (ipv4 and ipv6).
-
-
-Summary/Usage
--------------
-
-.. code-block:: shell
-
- set interface mac address <interface> <mac-address>.
-
-Examples
---------
-
-Examples of how to change MAC Address of interface:
-
-.. code-block:: console
-
- vpp# set interface mac address GigabitEthernet0/8/0 aa:bb:cc:dd:ee:01
- vpp# set interface mac address host-vpp0 aa:bb:cc:dd:ee:02
- vpp# set interface mac address tap-0 aa:bb:cc:dd:ee:03
- vpp# set interface mac address pg0 aa:bb:cc:dd:ee:04
-
-Set Interface Mtu
-=================
-
-.. toctree::
-
-Summary/Usage
--------------
-
-.. code-block:: shell
-
- set interface mtu [packet|ip4|ip6|mpls] <value> <interface>.
-
-Set Interface Promiscuous
-=========================
-
-Summary/Usage
--------------
-
-.. code-block:: shell
-
- set interface promiscuous [on|off] <interface>.
-
-.. _setintstate:
-
-Set Interface State
-===================
-This command is used to change the admin state (up/down) of an
-interface.
-
-If an interface is down, the optional '*punt*' flag can also be set. The
-'*punt*' flag implies the interface is disabled for forwarding but punt
-all traffic to slow-path. Use the '*enable*' flag to clear '*punt*' flag
-(interface is still down).
-
-Summary/Usage
--------------
-
-.. code-block:: shell
-
- set interface state <interface> [up|down|punt|enable].
-
-Examples
---------
-
-Example of how to configure the admin state of an interface to **up**:
-
-.. code-block:: console
-
- vpp# set interface state GigabitEthernet2/0/0 up
-
-Example of how to configure the admin state of an interface to **down**:
-
-.. code-block:: console
-
- vpp# set interface state GigabitEthernet2/0/0 down
diff --git a/docs/reference/cmdreference/interface/create_interface.rst b/docs/reference/cmdreference/interface/create_interface.rst
new file mode 100644
index 00000000000..f0e2e6ba115
--- /dev/null
+++ b/docs/reference/cmdreference/interface/create_interface.rst
@@ -0,0 +1,222 @@
+.. _interface:
+
+.. toctree::
+
+Create Interfaces Commands
+===========================
+This section contains those interface commands that are associated to creating an interface:
+
+* `Create Host-Interface`_
+* `Create Interface Memif`_
+* `Create Loopback Interface`_
+* `Create Sub-Interfaces`_
+
+.. note:: For a complete list of CLI Debug commands refer to the Debug CLI section of the `Source Code Documents <https://docs.fd.io/vpp/18.07/clicmd.html>`_ .
+
+Create Host-Interface
+++++++++++++++++++++++
+Summary/Usage
+-------------
+
+create host-interface name <*ifname*> [*hw-addr <*mac-addr*>]
+
+Description
+------------
+
+Create a host interface that will attach to a linux AF_PACKET interface, one side of a veth pair. The veth pair must already exist. Once created, a new host interface will exist in VPP with the name 'host-<*ifname*>', where '<*ifname*>' is the name of the specified veth pair. Use the `show interface` command to display host interface details.
+
+This command has the following optional parameters:
+
+ hw-addr <*mac-addr*> - Optional ethernet address, can be in either X:X:X:X:X:X unix or X.X.X cisco format
+
+Example Usage
+-------------
+
+ Example of how to create a host interface tied to one side of an existing linux veth pair named vpp1:
+
+ .. code-block:: console
+
+ vpp# create host-interface name vpp1
+
+ host-vpp1
+
+ Once the host interface is created, enable the interface using:
+
+ .. code-block:: console
+
+ vpp# set interface state host-vpp1 up
+
+Declaration and Implementation
+-------------------------------
+
+**Declaration:** af_packet_create_command (src/vnet/devices/af_packet/cli.c line 133)
+
+**Implementation:** af_packet_create_command_fn
+
+Create Interface Memif
++++++++++++++++++++++++
+
+Summary/Usage
+-------------
+
+create interface memif [id <*id*>] [socket-id <*socket-id*>] [ring-size <*size*>] [buffer-size <*size*>] [hw-addr <*mac-address*>] <master|slave> [rx-queues <*number*>] [tx-queues <*number*>] [mode ip] [secret <*string*>]
+
+Declaration and Implementation
+-------------------------------
+
+**Declaration:** memif_create_command (src/plugins/memif/cli.c line 258)
+
+**Implementation:** memif_create_command_fn
+
+
+Create Loopback Interface
+++++++++++++++++++++++++++
+
+Summary/Usage
+--------------
+
+create loopback interface [mac <*mac-addr*>] [instance <*instance*>]
+
+Description
+------------
+
+Create a loopback interface. Optionally, a MAC Address can be provided. If not provided, de:ad:00:00:00:<*loopId*> will be used.
+
+Example Usage
+--------------
+ The following two command syntaxes are equivalent:
+
+ .. code-block:: console
+
+ vpp# loopback create-interface [mac <*mac-addr*>] [instance <*instance*>]
+
+ vpp# create loopback interface [mac <*mac-addr*>] [instance <*instance*>]
+
+ Example of how to create a loopback interface:
+
+ .. code-block:: console
+
+ vpp# create loopback interface
+
+Declaration and Implementation
+-------------------------------
+
+**Declaration:** create_loopback_interface_command (src/vnet/ethernet/interface.c line 879)
+
+**Implementation:** create_simulated_ethernet_interfaces
+
+
+Create Sub-Interfaces
+++++++++++++++++++++++
+
+This command is used to add VLAN IDs to interfaces, also known as
+subinterfaces. The primary input to this command is the *interface*
+and *subId* (subinterface Id) parameters. If no additional VLAN ID is
+provide, the VLAN ID is assumed to be the *subId*. The VLAN ID and
+*subId* can be different, but this is not recommended.
+
+This command has several variations:
+
+- **create sub-interfaces** <*interface*> <*subId*> - Create a subinterface
+ to process packets with a given 802.1q VLAN ID (same value as the
+ *subId*).
+- **create sub-interfaces** <*interface*> <*subId*> default - Adding the
+ *default* parameter indicates that packets with VLAN IDs that do
+ not match any other subinterfaces should be sent to this
+ subinterface.
+- **create sub-interfaces** <*interface*> <*subId*> untagged - Adding the
+ *untagged* parameter indicates that packets no VLAN IDs should be
+ sent to this subinterface.
+- **create sub-interfaces** <*interface*> <*subId*>-<*subId*> - Create a
+ range of subinterfaces to handle a range of VLAN IDs.
+- **create sub-interfaces** <*interface*> <*subId*> dot1q|dot1ad <*vlanId*>|any
+ [exact-match] - Use this command to specify the outer VLAN ID, to
+ either be explicited or to make the VLAN ID different from the
+ *subId*.
+- **create sub-interfaces** <*interface*> <*subId*> dot1q|dot1ad <*vlanId*>|any
+ inner-dot1q <*vlanId*>|any [exact-match] - Use this command to
+ specify the outer VLAN ID and the innner VLAN ID.
+
+When *dot1q* or *dot1ad* is explictly entered, subinterfaces can be
+configured as either *exact-match* or *non-exact match*. *Non-exact match* is
+the CLI default. If *exact-match* is specified, packets must have the
+same number of VLAN tags as the configuration. For *non-exact-match*,
+packets must at least that number of tags. L3 (routed) interfaces must
+be configured as exact-match. L2 interfaces are typically configured as
+non-exact-match. If *dot1q* or *dot1ad* is NOT entered, then the
+default behavior is *exact-match*.
+
+Use the **show interface** command to display all subinterfaces.
+
+Summary/Usage
+-------------
+
+.. code-block:: shell
+
+ create sub-interfaces <interface> {<subId> [default|untagged]} | {<subId>-<subId>} | {<subId> dot1q|dot1ad <vlanId>|any [inner-dot1q <vlanId>|any] [exact-match]}
+
+Example Usage
+--------------
+
+Example of how to create a VLAN subinterface 11 to process packets on 802.1q VLAN ID 11:
+
+.. code-block:: console
+
+ vpp# create sub-interfaces GigabitEthernet2/0/0 11
+
+The previous example is shorthand and is equivalent to:
+
+.. code-block:: console
+
+ vpp# create sub-interfaces GigabitEthernet2/0/0 11 dot1q 11 exact-match
+
+Example of how to create a subinterface number that is different from the VLAN ID:
+
+.. code-block:: console
+
+ vpp# create sub-interfaces GigabitEthernet2/0/0 11 dot1q 100
+
+Examples of how to create q-in-q and q-in-any subinterfaces:
+
+.. code-block:: console
+
+ vpp# create sub-interfaces GigabitEthernet2/0/0 11 dot1q 100 inner-dot1q 200
+ vpp# create sub-interfaces GigabitEthernet2/0/0 12 dot1q 100 inner-dot1q any
+
+Examples of how to create dot1ad interfaces:
+
+.. code-block:: console
+
+ vpp# create sub-interfaces GigabitEthernet2/0/0 11 dot1ad 11
+ vpp# create sub-interfaces GigabitEthernet2/0/0 12 dot1ad 100 inner-dot1q 200
+
+Examples of *exact-match* versus non-exact match. A packet with outer VLAN 100 and inner VLAN 200 would match this interface, because the default is non-exact match:
+
+.. code-block:: console
+
+ vpp# create sub-interfaces GigabitEthernet2/0/0 5 dot1q 100
+
+However, the same packet would NOT match this interface because *exact-match* is specified and only one VLAN is configured, but packet contains two VLANs:
+
+.. code-block:: console
+
+ vpp# create sub-interfaces GigabitEthernet2/0/0 5 dot1q 100 exact-match
+
+Example of how to created a subinterface to process untagged packets:
+
+.. code-block:: console
+
+ vpp# create sub-interfaces GigabitEthernet2/0/0 5 untagged
+
+Example of how to created a subinterface to process any packet with a VLAN ID that does not match any other subinterface:
+
+.. code-block:: console
+
+ vpp# create sub-interfaces GigabitEthernet2/0/0 7 default
+
+When subinterfaces are created, they are in the down state. Example of how to enable a newly created subinterface:
+
+.. code-block:: console
+
+ vpp# set interface GigabitEthernet2/0/0.7 up
+
diff --git a/docs/reference/cmdreference/interface/hardware.rst b/docs/reference/cmdreference/interface/hardware.rst
index f4d334fd935..4ae8fd59559 100644
--- a/docs/reference/cmdreference/interface/hardware.rst
+++ b/docs/reference/cmdreference/interface/hardware.rst
@@ -1,32 +1,87 @@
-.. _hardwarecommands:
+.. _interface:
.. toctree::
+Hardware-Interfaces Commands
+=============================
+This section contains those interface commands that are related to hardware-interfaces:
+
+
+* `Show Bridge-Domain`_
+* `Show Hardware-Interfaces`_
+* `Clear Hardware-Interfaces`_
+
+.. note:: For a complete list of CLI Debug commands refer to the Debug CLI section of the `Source Code Documents <https://docs.fd.io/vpp/18.07/clicmd.html>`_ .
+
+Show Bridge-Domain
++++++++++++++++++++
+
+Summary/Usage
+--------------
+
+show bridge-domain [*bridge-domain-id* [detail|int|arp| *bd-tag* ]]
+
+Description
+------------
+
+Show a summary of all the bridge-domain instances or detailed view of a single bridge-domain. Bridge-domains are created by adding an interface to a bridge using the **set interface l2 bridge** command.
+
+Example Usage
+--------------
+.. code-block:: console
+
+ Example of displaying all bridge-domains:
+
+ vpp# show bridge-domain
+
+ ID Index Learning U-Forwrd UU-Flood Flooding ARP-Term BVI-Intf
+ 0 0 off off off off off local0
+ 200 1 on on on on off N/A
+
+ Example of displaying details of a single bridge-domains:
+
+ vpp# show bridge-domain 200 detail
+
+ ID Index Learning U-Forwrd UU-Flood Flooding ARP-Term BVI-Intf
+ 200 1 on on on on off N/A
+
+ Interface Index SHG BVI VLAN-Tag-Rewrite
+ GigabitEthernet0/8/0.200 3 0 - none
+ GigabitEthernet0/9/0.200 4 0 - none
+
+Declaration and Implementation
+-------------------------------
+
+**Declaration:** bd_show_cli (src/vnet/l2/l2_bd.c line 1151)
+
+**Implementation:** bd_show
+
Show Hardware-Interfaces
-========================
++++++++++++++++++++++++++
Display more detailed information about all or a list of given
interfaces. The verboseness of the output can be controlled by the
following optional parameters:
-- brief: Only show name, index and state (default for bonded
+- **brief**: Only show name, index and state (default for bonded
interfaces).
-- verbose: Also display additional attributes (default for all other
+- **verbose**: Also display additional attributes (default for all other
interfaces).
-- detail: Also display all remaining attributes and extended
+- **detail**: Also display all remaining attributes and extended
statistics.
-**To limit the output of the command to bonded interfaces and their
-slave interfaces, use the '*bond*' optional parameter.**
+.. note::
+ To limit the output of the command to bonded interfaces and their
+ slave interfaces, use the '*bond*' optional parameter.
Summary/Usage
--------------
+--------------
.. code-block:: shell
show hardware-interfaces [brief|verbose|detail] [bond] [<interface> [<interface> [..]]] [<sw_idx> [<sw_idx> [..]]].
Examples
---------
+---------
Example of how to display default data for all interfaces:
.. code-block:: console
@@ -56,7 +111,7 @@ Example of how to display default data for all interfaces:
local0 0 down local0
local
-Example of how to display '*verbose*' data for an interface by name and software index (where 2 is the software index):
+Example of how to display *verbose* data for an interface by name and software index (where 2 is the software index):
.. code-block:: console
@@ -76,10 +131,10 @@ Example of how to display '*verbose*' data for an interface by name and software
cpu socket 0
Clear Hardware-Interfaces
-=========================
++++++++++++++++++++++++++++
Clear the extended statistics for all or a list of given interfaces
-(statistics associated with the '*show hardware-interfaces*' command).
+(statistics associated with the **show hardware-interfaces** command).
Summary/Usage
@@ -88,7 +143,7 @@ Summary/Usage
.. code-block:: shell
clear hardware-interfaces [<interface> [<interface> [..]]] [<sw_idx> [<sw_idx> [..]]].
-
+
Examples
--------
@@ -100,7 +155,7 @@ Example of how to clear the extended statistics for all interfaces:
vpp# clear hardware-interfaces
-Example of how to clear the extended statistics for an interface by name and software index (where 2 is the software index):
+Example of how to clear the extended statistics for an interface by name and software index (where 2 is the software index):
.. code-block:: console
diff --git a/docs/reference/cmdreference/interface/index.rst b/docs/reference/cmdreference/interface/index.rst
index db4aa44bba2..7fca8f11df2 100644
--- a/docs/reference/cmdreference/interface/index.rst
+++ b/docs/reference/cmdreference/interface/index.rst
@@ -1,10 +1,17 @@
-.. _interfacecommands:
+.. _interface:
+
+.. note:: For a complete list of CLI Debug commands refer to the Debug CLI section of the `Source Code Documents <https://docs.fd.io/vpp/18.07/clicmd.html>`_ .
+
+.. _intcommands:
Interface Commands
==================
+This section identifies the following types of interface commands:
.. toctree::
+ :maxdepth: 2
+ basic
hardware
- interface
- subinterface
+ create_interface
+ setinterface
diff --git a/docs/reference/cmdreference/interface/setinterface.rst b/docs/reference/cmdreference/interface/setinterface.rst
new file mode 100644
index 00000000000..744263e57f3
--- /dev/null
+++ b/docs/reference/cmdreference/interface/setinterface.rst
@@ -0,0 +1,187 @@
+.. _interface:
+
+.. toctree::
+
+Set Interface Commands
+=======================
+This section covers those commands that are related to setting an interface:
+
+* `Set Interface`_
+* `Set Interface IP Address`_
+* `Set Interface L2 Bridge`_
+* `Set Interface Mtu`_
+* `Set Interface Promiscuous`_
+* `Set Interface State`_
+
+.. note:: For a complete list of CLI Debug commands refer to the Debug CLI section of the `Source Code Documents <https://docs.fd.io/vpp/18.07/clicmd.html>`_ .
+
+Set Interface
+++++++++++++++++
+
+Summary/Usage
+-------------
+
+Interface commands.
+
+Declaration and Implementation
+-------------------------------
+
+**Declaration:** vnet_cli_set_interface_command (src/vnet/interface_cli.c line 484)
+
+Set Interface IP Address
++++++++++++++++++++++++++
+
+Summary/Usage
+-------------
+
+set interface ip address [del] <*interface*> <*ip-addr*>/<*mask*> | [all]
+
+Description
+-------------
+
+Add an IP Address to an interface or remove and IP Address from an interface. The IP Address can be an IPv4 or an IPv6 address. Interfaces may have multiple IPv4 and IPv6 addresses. There is no concept of primary vs. secondary interface addresses; they're just addresses.
+
+To display the addresses associated with a given interface, use the command **show interface address** <*interface*>.
+
+.. note::
+ The debug CLI does not enforce classful mask-width / addressing constraints.
+
+Example Usage
+--------------
+
+An example of how to add an IPv4 address to an interface:
+
+.. code-block:: console
+
+ vpp# set interface ip address GigabitEthernet2/0/0 172.16.2.12/24
+
+An example of how to add an IPv6 address to an interface:
+
+.. code-block:: console
+
+ vpp# set interface ip address GigabitEthernet2/0/0 ::a:1:1:0:7/126
+
+To delete a specific interface ip address:
+
+.. code-block:: console
+
+ vpp# set interface ip address GigabitEthernet2/0/0 172.16.2.12/24 del
+
+To delete all interfaces addresses (IPv4 and IPv6):
+
+.. code-block:: console
+
+ vpp# set interface ip address GigabitEthernet2/0/0 del all
+
+Declaration and Implementation
+-------------------------------
+
+**Declaration:** set_interface_ip_address_command (src/vnet/ip/ip46_cli.c line 216)
+
+**Implementation:** add_del_ip_address
+
+
+Set Interface L2 Bridge
++++++++++++++++++++++++++
+
+Summary/Usage
+-------------
+
+set interface l2 bridge <*interface*> <*bridge-domain-id*> [bvi|uu-fwd] [shg]
+
+Description
+-------------
+
+Use this command put an interface into Layer 2 bridge domain. If a bridge-domain with the provided bridge-domain-id does not exist, it will be created. Interfaces in a bridge-domain forward packets to other interfaces in the same bridge-domain based on destination mac address. To remove an interface from a the Layer 2 bridge domain, put the interface in a different mode, for example Layer 3 mode.
+
+Optionally, an interface can be added to a Layer 2 bridge-domain as a Bridged Virtual Interface (bvi). Only one interface in a Layer 2 bridge-domain can be a bvi.
+
+Optionally, a split-horizon group can also be specified. This defaults to 0 if not specified.
+
+Example Usage
+--------------
+Example of how to configure a Layer 2 bridge-domain with three interfaces (where 200 is the bridge-domain-id):
+
+.. code-block:: console
+
+ vpp# set interface l2 bridge GigabitEthernet0/8/0.200 200
+
+This interface is added a BVI interface:
+
+.. code-block:: console
+
+ vpp# set interface l2 bridge GigabitEthernet0/9/0.200 200 bvi
+
+This interface also has a split-horizon group of 1 specified:
+
+.. code-block:: console
+
+ vpp# set interface l2 bridge GigabitEthernet0/a/0.200 200 1
+
+Example of how to remove an interface from a Layer2 bridge-domain:
+
+.. code-block:: console
+
+ vpp# set interface l3 GigabitEthernet0/a/0.200
+
+Declaration and Implementation
+-------------------------------
+
+**Declaration:** int_l2_bridge_cli (src/vnet/l2/l2_input.c line 949)
+
+**Implementation:** int_l2_bridge
+
+Set Interface Mtu
+++++++++++++++++++
+
+Summary/Usage
+-------------
+
+.. code-block:: shell
+
+ set interface mtu [packet|ip4|ip6|mpls] <value> <interface>
+
+Set Interface Promiscuous
+++++++++++++++++++++++++++
+
+Summary/Usage
+-------------
+
+.. code-block:: shell
+
+ set interface promiscuous [on|off] <interface>.
+
+.. _setintstate:
+
+Set Interface State
+++++++++++++++++++++
+This command is used to change the admin state (up/down) of an
+interface.
+
+If an interface is down, the optional *punt* flag can also be set. The
+*punt* flag implies the interface is disabled for forwarding but punt
+all traffic to slow-path. Use the *enable* flag to clear *punt* flag
+(interface is still down).
+
+Summary/Usage
+-------------
+
+.. code-block:: shell
+
+ set interface state <interface> [up|down|punt|enable].
+
+Example Usage
+----------------
+
+Example of how to configure the admin state of an interface to **up**:
+
+.. code-block:: console
+
+ vpp# set interface state GigabitEthernet2/0/0 up
+
+Example of how to configure the admin state of an interface to **down**:
+
+.. code-block:: console
+
+ vpp# set interface state GigabitEthernet2/0/0 down
+
diff --git a/docs/reference/cmdreference/interface/subinterface.rst b/docs/reference/cmdreference/interface/subinterface.rst
deleted file mode 100644
index 24519bc1a26..00000000000
--- a/docs/reference/cmdreference/interface/subinterface.rst
+++ /dev/null
@@ -1,117 +0,0 @@
-.. _subinterfacecommands:
-
-.. toctree::
-
-Create Sub-Interfaces
-=====================
-This command is used to add VLAN IDs to interfaces, also known as
-subinterfaces. The primary input to this command is the '*interface*'
-and '*subId*' (subinterface Id) parameters. If no additional VLAN ID is
-provide, the VLAN ID is assumed to be the '*subId*'. The VLAN ID and
-'*subId*' can be different, but this is not recommended.
-
-This command has several variations:
-
-- **create sub-interfaces <interface> <subId>** - Create a subinterface
- to process packets with a given 802.1q VLAN ID (same value as the
- '*subId*').
-- **create sub-interfaces <interface> <subId> default** - Adding the
- '*default*' parameter indicates that packets with VLAN IDs that do
- not match any other subinterfaces should be sent to this
- subinterface.
-- **create sub-interfaces <interface> <subId> untagged** - Adding the
- '*untagged*' parameter indicates that packets no VLAN IDs should be
- sent to this subinterface.
-- **create sub-interfaces <interface> <subId>-<subId>** - Create a
- range of subinterfaces to handle a range of VLAN IDs.
-- **create sub-interfaces <interface> <subId> dot1q|dot1ad <vlanId>|any
- [exact-match]** - Use this command to specify the outer VLAN ID, to
- either be explicited or to make the VLAN ID different from the
- '*subId*'.
-- **create sub-interfaces <interface> <subId> dot1q|dot1ad <vlanId>|any
- inner-dot1q <vlanId>|any [exact-match]** - Use this command to
- specify the outer VLAN ID and the innner VLAN ID.
-
-When '*dot1q*' or '*dot1ad*' is explictly entered, subinterfaces can be
-configured as either exact-match or non-exact match. Non-exact match is
-the CLI default. If '*exact-match*' is specified, packets must have the
-same number of VLAN tags as the configuration. For non-exact-match,
-packets must at least that number of tags. L3 (routed) interfaces must
-be configured as exact-match. L2 interfaces are typically configured as
-non-exact-match. If '*dot1q*' or '*dot1ad*' is NOT entered, then the
-default behavior is exact-match.
-
-Use the '*show interface*' command to display all subinterfaces.
-
-Summary/Usage
--------------
-
-.. code-block:: shell
-
- create sub-interfaces <interface> {<subId> [default|untagged]} | {<subId>-<subId>} | {<subId> dot1q|dot1ad <vlanId>|any [inner-dot1q <vlanId>|any] [exact-match]}.
-
-Examples
---------
-
-Example of how to create a VLAN subinterface 11 to process packets on 802.1q VLAN ID 11:
-
-.. code-block:: console
-
- vpp# create sub-interfaces GigabitEthernet2/0/0 11
-
-The previous example is shorthand and is equivalent to:
-
-.. code-block:: console
-
- vpp# create sub-interfaces GigabitEthernet2/0/0 11 dot1q 11 exact-match
-
-Example of how to create a subinterface number that is different from the VLAN ID:
-
-.. code-block:: console
-
- vpp# create sub-interfaces GigabitEthernet2/0/0 11 dot1q 100
-
-Examples of how to create q-in-q and q-in-any subinterfaces:
-
-.. code-block:: console
-
- vpp# create sub-interfaces GigabitEthernet2/0/0 11 dot1q 100 inner-dot1q 200
- vpp# create sub-interfaces GigabitEthernet2/0/0 12 dot1q 100 inner-dot1q any
-
-Examples of how to create dot1ad interfaces:
-
-.. code-block:: console
-
- vpp# create sub-interfaces GigabitEthernet2/0/0 11 dot1ad 11
- vpp# create sub-interfaces GigabitEthernet2/0/0 12 dot1ad 100 inner-dot1q 200
-
-Examples of '*exact-match*' versus non-exact match. A packet with outer VLAN 100 and inner VLAN 200 would match this interface, because the default is non-exact match:
-
-.. code-block:: console
-
- vpp# create sub-interfaces GigabitEthernet2/0/0 5 dot1q 100
-
-However, the same packet would NOT match this interface because '*exact-match*' is specified and only one VLAN is configured, but packet contains two VLANs:
-
-.. code-block:: console
-
- vpp# create sub-interfaces GigabitEthernet2/0/0 5 dot1q 100 exact-match
-
-Example of how to created a subinterface to process untagged packets:
-
-.. code-block:: console
-
- vpp# create sub-interfaces GigabitEthernet2/0/0 5 untagged
-
-Example of how to created a subinterface to process any packet with a VLAN ID that does not match any other subinterface:
-
-.. code-block:: console
-
- vpp# create sub-interfaces GigabitEthernet2/0/0 7 default
-
-When subinterfaces are created, they are in the down state. Example of how to enable a newly created subinterface:
-
-.. code-block:: console
-
- vpp# set interface GigabitEthernet2/0/0.7 up
-
diff --git a/docs/reference/cmdreference/ip/index.rst b/docs/reference/cmdreference/ip/index.rst
new file mode 100644
index 00000000000..0dbe5c63de7
--- /dev/null
+++ b/docs/reference/cmdreference/ip/index.rst
@@ -0,0 +1,12 @@
+.. ip:
+
+.. note:: For a complete list of CLI Debug commands refer to the Debug CLI section of the `Source Code Documents <https://docs.fd.io/vpp/18.07/clicmd.html>`_ .
+
+IP Commands
+============
+This section identifies the following types of IP commands:
+
+.. toctree::
+ :maxdepth: 2
+
+ ip \ No newline at end of file
diff --git a/docs/reference/cmdreference/ip/ip.rst b/docs/reference/cmdreference/ip/ip.rst
new file mode 100644
index 00000000000..32cc30c4275
--- /dev/null
+++ b/docs/reference/cmdreference/ip/ip.rst
@@ -0,0 +1,145 @@
+.. _ip1:
+
+.. toctree::
+
+.. note:: For a complete list of CLI Debug commands refer to the Debug CLI section of the `Source Code Documents <https://docs.fd.io/vpp/18.07/clicmd.html>`_ .
+
+IP Route
+==========
+
+Summary/Usage
+--------------
+
+`ip route [add|del] [count <*n*>] <*dst-ip-addr*>/<*width*> [table <*table-id*>] via [next-hop-address] [next-hop-interface] [next-hop-table <*value*>] [weight <*value*>] [preference <*value*>] [udp-encap-id <*value*>] [ip4-lookup-in-table <*value*>] [ip6-lookup-in-table <*value*>] [mpls-lookup-in-table <*value*>] [resolve-via-host] [resolve-via-connected] [rx-ip4 <*interface*>] [out-labels <*value value value*>]`
+
+Description
+------------
+
+This command is used to add or delete IPv4 or IPv6 routes. All IP Addresses ('<*dst-ip-addr*>/<*width*>', '<*next-hop-ip-addr*>' and '<*adj-hop-ip-addr*>') can be IPv4 or IPv6, but all must be of the same form in a single command. To display the current set of routes, use the commands 'show ip fib' and 'show ip6 fib'.
+
+Example Usage
+--------------
+
+Example of how to add a straight forward static route:
+
+.. code-block:: console
+
+ vpp# ip route add 6.0.1.2/32 via 6.0.0.1 GigabitEthernet2/0/0
+
+Example of how to delete a straight forward static route:
+
+.. code-block:: console
+
+ vpp# ip route del 6.0.1.2/32 via 6.0.0.1 GigabitEthernet2/0/0
+
+Mainly for route add/del performance testing, one can add or delete multiple routes by adding 'count N' to the previous item:
+
+.. code-block:: console
+
+ vpp# ip route add count 10 7.0.0.0/24 via 6.0.0.1 GigabitEthernet2/0/0
+
+Add multiple routes for the same destination to create equal-cost multipath:
+
+.. code-block:: console
+
+ vpp# ip route add 7.0.0.1/32 via 6.0.0.1 GigabitEthernet2/0/0
+
+ vpp# ip route add 7.0.0.1/32 via 6.0.0.2 GigabitEthernet2/0/0
+
+For unequal-cost multipath, specify the desired weights. This combination of weights results in 3/4 of the traffic following the second path, 1/4 following the first path:
+
+.. code-block:: console
+
+ vpp# ip route add 7.0.0.1/32 via 6.0.0.1 GigabitEthernet2/0/0 weight 1
+
+ vpp# ip route add 7.0.0.1/32 via 6.0.0.2 GigabitEthernet2/0/0 weight 3
+
+To add a route to a particular FIB table (VRF), use:
+
+.. code-block:: console
+
+ vpp# ip route add 172.16.24.0/24 table 7 via GigabitEthernet2/0/0
+
+Declaration and Implementation
+---------------------------------
+
+**Declaration:** ip_route_command (src/vnet/ip/lookup.c line 641)
+
+**Implementation:** vnet_ip_route_cmd
+
+Ping
+=====
+
+Summary/Usage
+--------------
+
+ping {<*ip-addr*> | ipv4 <*ip4-addr*> | ipv6 <*ip6-addr*>} [ipv4 <*ip4-addr*> | ipv6 <*ip6-addr*>] [source <*interface*>] [size <*pktsize*>] [interval <*sec*>] [repeat <*cnt*>] [table-id <*id*>] [verbose]
+
+Description
+------------
+
+This command sends an ICMP ECHO_REQUEST to network hosts. The address can be an IPv4 or IPv6 address (or both at the same time).
+
+Example Usage
+--------------
+
+Example of how ping an IPv4 address:
+
+.. code-block:: console
+
+ vpp# ping 172.16.1.2 source GigabitEthernet2/0/0 repeat 2
+
+ 64 bytes from 172.16.1.2: icmp_seq=1 ttl=64 time=.1090 ms
+ 64 bytes from 172.16.1.2: icmp_seq=2 ttl=64 time=.0914 ms
+
+ Statistics: 2 sent, 2 received, 0% packet loss
+
+ Example of how ping both an IPv4 address and IPv6 address at the same time:
+
+ vpp# ping 172.16.1.2 ipv6 fe80::24a5:f6ff:fe9c:3a36 source GigabitEthernet2/0/0 repeat 2 verbose
+
+ Adjacency index: 10, sw_if_index: 1
+ Adj: ip6-discover-neighbor
+ Adj Interface: 0
+ Forced set interface: 1
+ Adjacency index: 0, sw_if_index: 4294967295
+ Adj: ip4-miss
+ Adj Interface: 0
+ Forced set interface: 1
+ Source address: 172.16.1.1
+ 64 bytes from 172.16.1.2: icmp_seq=1 ttl=64 time=.1899 ms
+ Adjacency index: 10, sw_if_index: 1
+ Adj: ip6-discover-neighbor
+ Adj Interface: 0
+ Forced set interface: 1
+ Adjacency index: 0, sw_if_index: 4294967295
+ Adj: ip4-miss
+ Adj Interface: 0
+ Forced set interface: 1
+ Source address: 172.16.1.1
+ 64 bytes from 172.16.1.2: icmp_seq=2 ttl=64 time=.0910 ms
+
+ Statistics: 4 sent, 2 received, 50% packet loss
+
+Declaration and Implementation
+-------------------------------
+
+Declaration: ping_command (src/vnet/ip/ping.c line 899)
+
+Implementation: ping_ip_address
+
+Set Interface IP Address
+=========================
+
+`Set Interface IP Address <../interface/setinterface.html#set-interface-ip-address>`_
+
+Show IP Arp
+=============
+
+`Show IP-Arp <../show/show.html#show-ip-arp>`_
+
+
+Show IP Fib
+============
+
+`Show IP-Fib <../show/show.html#show-ip-fib>`_
diff --git a/docs/reference/cmdreference/show/index.rst b/docs/reference/cmdreference/show/index.rst
new file mode 100644
index 00000000000..7973758d50d
--- /dev/null
+++ b/docs/reference/cmdreference/show/index.rst
@@ -0,0 +1,12 @@
+.. _interface:
+
+.. note:: For a complete list of CLI Debug commands refer to the Debug CLI section of the `Source Code Documents <https://docs.fd.io/vpp/18.07/clicmd.html>`_ .
+
+Show Commands
+==================
+This section identifies the following types of show commands:
+
+.. toctree::
+ :maxdepth: 2
+
+ show \ No newline at end of file
diff --git a/docs/reference/cmdreference/show/show.rst b/docs/reference/cmdreference/show/show.rst
new file mode 100644
index 00000000000..492477defd5
--- /dev/null
+++ b/docs/reference/cmdreference/show/show.rst
@@ -0,0 +1,283 @@
+.. _interface:
+
+.. toctree::
+
+.. note:: For a complete list of CLI Debug commands refer to the Debug CLI section of the `Source Code Documents <https://docs.fd.io/vpp/18.07/clicmd.html>`_ .
+
+Show Bridge-Domain
+===================
+
+`Show Bridge-Domain <../interface/hardware.html#show-bridge-domain>`_
+
+Show Interface
+================
+
+`Show Interface <../interface/basic.html#show-interface>`_
+
+Show IP Arp
+============
+
+Summary/Usage
+---------------
+
+show ip arp
+
+Description
+------------
+
+Display all the IPv4 ARP entries.
+
+Example Usage
+--------------
+Example of how to display the IPv4 ARP table:
+
+.. code-block:: console
+
+ vpp# **show ip arp**
+ Time FIB IP4 Flags Ethernet Interface
+ 346.3028 0 6.1.1.3 de:ad:be:ef:ba:be GigabitEthernet2/0/0
+ 3077.4271 0 6.1.1.4 S de:ad:be:ef:ff:ff GigabitEthernet2/0/0
+ 2998.6409 1 6.2.2.3 de:ad:be:ef:00:01 GigabitEthernet2/0/0
+ Proxy arps enabled for:
+ Fib_index 0 6.0.0.1 - 6.0.0.11
+
+
+Declaration and Implementation
+-------------------------------
+
+**Declaration:** show_ip4_arp_command (src/vnet/ethernet/arp.c line 1465)
+
+**Implementation:** show_ip4_arp
+
+Show IP Fib
+=============
+
+Summary/Usage
+---------------
+
+show ip fib [summary] [table <*table-id*>] [index <*fib-id*>] [<*ip4-addr*>[/<*mask*>]] [mtrie] [detail]
+
+Description
+------------
+
+This command displays the IPv4 FIB Tables (VRF Tables) and the route entries for each table.
+
+.. note::
+ This command will run for a long time when the FIB tables are comprised of millions of entries. For those senarios, consider displaying a single table or summary mode.
+
+Example Usage
+--------------
+Example of how to display all the IPv4 FIB tables:
+
+.. code-block:: console
+
+ vpp# **show ip fib**
+
+ ipv4-VRF:0, fib_index 0, flow hash: src dst sport dport proto
+ 0.0.0.0/0
+ unicast-ip4-chain
+ [@0]: dpo-load-balance: [index:0 buckets:1 uRPF:0 to:[0:0]]
+ [0] [@0]: dpo-drop ip6
+ 0.0.0.0/32
+ unicast-ip4-chain
+ [@0]: dpo-load-balance: [index:1 buckets:1 uRPF:1 to:[0:0]]
+ [0] [@0]: dpo-drop ip6
+ 6.0.1.2/32
+ unicast-ip4-chain
+ [@0]: dpo-load-balance: [index:30 buckets:1 uRPF:29 to:[0:0]]
+ [0] [@3]: arp-ipv4: via 6.0.0.1 af_packet0
+ 7.0.0.1/32
+ unicast-ip4-chain
+ [@0]: dpo-load-balance: [index:31 buckets:4 uRPF:30 to:[0:0]]
+ [0] [@3]: arp-ipv4: via 6.0.0.2 af_packet0
+ [1] [@3]: arp-ipv4: via 6.0.0.2 af_packet0
+ [2] [@3]: arp-ipv4: via 6.0.0.2 af_packet0
+ [3] [@3]: arp-ipv4: via 6.0.0.1 af_packet0
+ 224.0.0.0/8
+ unicast-ip4-chain
+ [@0]: dpo-load-balance: [index:3 buckets:1 uRPF:3 to:[0:0]]
+ [0] [@0]: dpo-drop ip6
+ 240.0.0.0/8
+ unicast-ip4-chain
+ [@0]: dpo-load-balance: [index:2 buckets:1 uRPF:2 to:[0:0]]
+ [0] [@0]: dpo-drop ip6
+ 255.255.255.255/32
+ unicast-ip4-chain
+ [@0]: dpo-load-balance: [index:4 buckets:1 uRPF:4 to:[0:0]]
+ [0] [@0]: dpo-drop ip6
+ ipv4-VRF:7, fib_index 1, flow hash: src dst sport dport proto
+ 0.0.0.0/0
+ unicast-ip4-chain
+ [@0]: dpo-load-balance: [index:12 buckets:1 uRPF:11 to:[0:0]]
+ [0] [@0]: dpo-drop ip6
+ 0.0.0.0/32
+ unicast-ip4-chain
+ [@0]: dpo-load-balance: [index:13 buckets:1 uRPF:12 to:[0:0]]
+ [0] [@0]: dpo-drop ip6
+ 172.16.1.0/24
+ unicast-ip4-chain
+ [@0]: dpo-load-balance: [index:17 buckets:1 uRPF:16 to:[0:0]]
+ [0] [@4]: ipv4-glean: af_packet0
+ 172.16.1.1/32
+ unicast-ip4-chain
+ [@0]: dpo-load-balance: [index:18 buckets:1 uRPF:17 to:[1:84]]
+ [0] [@2]: dpo-receive: 172.16.1.1 on af_packet0
+ 172.16.1.2/32
+ unicast-ip4-chain
+ [@0]: dpo-load-balance: [index:21 buckets:1 uRPF:20 to:[0:0]]
+ [0] [@5]: ipv4 via 172.16.1.2 af_packet0: IP4: 02:fe:9e:70:7a:2b -> 26:a5:f6:9c:3a:36
+ 172.16.2.0/24
+ unicast-ip4-chain
+ [@0]: dpo-load-balance: [index:19 buckets:1 uRPF:18 to:[0:0]]
+ [0] [@4]: ipv4-glean: af_packet1
+ 172.16.2.1/32
+ unicast-ip4-chain
+ [@0]: dpo-load-balance: [index:20 buckets:1 uRPF:19 to:[0:0]]
+ [0] [@2]: dpo-receive: 172.16.2.1 on af_packet1
+ 224.0.0.0/8
+ unicast-ip4-chain
+ [@0]: dpo-load-balance: [index:15 buckets:1 uRPF:14 to:[0:0]]
+ [0] [@0]: dpo-drop ip6
+ 240.0.0.0/8
+ unicast-ip4-chain
+ [@0]: dpo-load-balance: [index:14 buckets:1 uRPF:13 to:[0:0]]
+ [0] [@0]: dpo-drop ip6
+ 255.255.255.255/32
+ unicast-ip4-chain
+ [@0]: dpo-load-balance: [index:16 buckets:1 uRPF:15 to:[0:0]]
+ [0] [@0]: dpo-drop ip6
+
+Example of how to display a single IPv4 FIB table:
+
+.. code-block:: console
+
+ vpp# **show ip fib table 7**
+
+ ipv4-VRF:7, fib_index 1, flow hash: src dst sport dport proto
+ 0.0.0.0/0
+ unicast-ip4-chain
+ [@0]: dpo-load-balance: [index:12 buckets:1 uRPF:11 to:[0:0]]
+ [0] [@0]: dpo-drop ip6
+ 0.0.0.0/32
+ unicast-ip4-chain
+ [@0]: dpo-load-balance: [index:13 buckets:1 uRPF:12 to:[0:0]]
+ [0] [@0]: dpo-drop ip6
+ 172.16.1.0/24
+ unicast-ip4-chain
+ [@0]: dpo-load-balance: [index:17 buckets:1 uRPF:16 to:[0:0]]
+ [0] [@4]: ipv4-glean: af_packet0
+ 172.16.1.1/32
+ unicast-ip4-chain
+ [@0]: dpo-load-balance: [index:18 buckets:1 uRPF:17 to:[1:84]]
+ [0] [@2]: dpo-receive: 172.16.1.1 on af_packet0
+ 172.16.1.2/32
+ unicast-ip4-chain
+ [@0]: dpo-load-balance: [index:21 buckets:1 uRPF:20 to:[0:0]]
+ [0] [@5]: ipv4 via 172.16.1.2 af_packet0: IP4: 02:fe:9e:70:7a:2b -*> 26:a5:f6:9c:3a:36
+ 172.16.2.0/24
+ unicast-ip4-chain
+ [@0]: dpo-load-balance: [index:19 buckets:1 uRPF:18 to:[0:0]]
+ [0] [@4]: ipv4-glean: af_packet1
+ 172.16.2.1/32
+ unicast-ip4-chain
+ [@0]: dpo-load-balance: [index:20 buckets:1 uRPF:19 to:[0:0]]
+ [0] [@2]: dpo-receive: 172.16.2.1 on af_packet1
+ 224.0.0.0/8
+ unicast-ip4-chain
+ [@0]: dpo-load-balance: [index:15 buckets:1 uRPF:14 to:[0:0]]
+ [0] [@0]: dpo-drop ip6
+ 240.0.0.0/8
+ unicast-ip4-chain
+ [@0]: dpo-load-balance: [index:14 buckets:1 uRPF:13 to:[0:0]]
+ [0] [@0]: dpo-drop ip6
+ 255.255.255.255/32
+ unicast-ip4-chain
+ [@0]: dpo-load-balance: [index:16 buckets:1 uRPF:15 to:[0:0]]
+ [0] [@0]: dpo-drop ip6
+
+Example of how to display a summary of all IPv4 FIB tables:
+
+.. code-block:: console
+
+ vpp# **show ip fib summary**
+
+ ipv4-VRF:0, fib_index 0, flow hash: src dst sport dport proto
+ Prefix length Count
+ 0 1
+ 8 2
+ 32 4
+ ipv4-VRF:7, fib_index 1, flow hash: src dst sport dport proto
+ Prefix length Count
+ 0 1
+ 8 2
+ 24 2
+ 32 4
+
+Declaration and Implementation
+-------------------------------
+
+**Declaration:** ip4_show_fib_command (src/vnet/fib/ip4_fib.c line 873)
+
+**Implementation:** ip4_show_fib
+
+Show L2fib
+============
+
+Summary/Usage
+------------------
+
+show l2fib [all] | [bd_id <*nn*> | bd_index <*nn*>] [learn | add] | [raw]
+
+Description
+------------
+
+This command displays the MAC Address entries of the L2 FIB table. Output can be filtered to just get the number of MAC Addresses or display each MAC Address for all bridge domains or just a single bridge domain.
+
+Example Usage
+--------------
+Example of how to display the number of MAC Address entries in the L2 FIB table:
+
+
+.. code-block:: console
+
+ vpp# **show l2fib**
+
+ 3 l2fib entries
+
+ Example of how to display all the MAC Address entries in the L2 FIB table:
+
+ vpp# **show l2fib all**
+
+ Mac Address BD Idx Interface Index static filter bvi refresh timestamp
+ 52:54:00:53:18:33 1 GigabitEthernet0/8/0.200 3 0 0 0 0 0
+ 52:54:00:53:18:55 1 GigabitEthernet0/8/0.200 3 1 0 0 0 0
+ 52:54:00:53:18:77 1 N/A -1 1 1 0 0 0
+ 3 l2fib entries
+
+Declaration and Implementation
+-------------------------------
+
+**Declaration:** show_l2fib_cli (src/vnet/l2/l2_fib.c line 311)
+
+**Implementation:** show_l2fib
+
+Show Trace
+===========
+
+Summary/Usage
+--------------
+
+show trace buffer [max COUNT]
+
+Declaration and Implementation
+------------------------------
+
+**Declaration:** show_trace_cli (src/vlib/trace.c line 347)
+
+**Implementation:** cli_show_trace_buffer
+
+Show Vhost-User
+================
+
+`Show Vhost-User <../vhost/vhostuser.html#show-vhost-user>`_
+
diff --git a/docs/reference/cmdreference/trace/index.rst b/docs/reference/cmdreference/trace/index.rst
new file mode 100644
index 00000000000..ce213cc985b
--- /dev/null
+++ b/docs/reference/cmdreference/trace/index.rst
@@ -0,0 +1,12 @@
+.. _interface:
+
+.. note:: For a complete list of CLI Debug commands refer to the Debug CLI section of the `Source Code Documents <https://docs.fd.io/vpp/18.07/clicmd.html>`_ .
+
+Trace Commands
+===============
+This section identifies the following types of trace commands:
+
+.. toctree::
+ :maxdepth: 2
+
+ trace \ No newline at end of file
diff --git a/docs/reference/cmdreference/trace/trace.rst b/docs/reference/cmdreference/trace/trace.rst
new file mode 100644
index 00000000000..5d0ddb604ef
--- /dev/null
+++ b/docs/reference/cmdreference/trace/trace.rst
@@ -0,0 +1,58 @@
+.. _interface:
+
+.. toctree::
+
+.. note:: For a complete list of CLI Debug commands refer to the Debug CLI section of the `Source Code Documents <https://docs.fd.io/vpp/18.07/clicmd.html>`_ .
+
+
+API Trace
+===========
+
+Summary/Usage
+--------------
+
+api trace [on|off][first <*n*>][last <*n*>][status][free][post-mortem-on][dump|custom-dump|save|replay <*file*>]
+
+Description
+------------
+
+Display, replay, or save a binary API trace.
+
+Declaration and Implementation
+-------------------------------
+
+**Declaration:** api_trace_command (src/vlibmemory/vlib_api_cli.c line 783)
+
+**Implementation:** api_trace_command_fn
+
+Clear Trace
+=============
+
+Summary/Usage
+--------------
+Clear trace buffer and free memory.
+Declaration and implementation
+
+**Declaration:** clear_trace_cli (src/vlib/trace.c line 519)
+
+**Implementation:** cli_clear_trace_buffer
+
+Show Trace
+===========
+
+`Show Trace <../interface/show.html#show-trace>`_
+
+Trace Add
+===========
+
+Summary/Usage
+--------------
+
+Trace given number of packets.
+
+Declaration and Implementation
+-------------------------------
+
+**Declaration:** add_trace_cli (src/vlib/trace.c line 405)
+
+**Implementation:** cli_add_trace_buffer \ No newline at end of file
diff --git a/docs/reference/cmdreference/vhost/index.rst b/docs/reference/cmdreference/vhost/index.rst
index 3e41718af26..d1cce23ff76 100644
--- a/docs/reference/cmdreference/vhost/index.rst
+++ b/docs/reference/cmdreference/vhost/index.rst
@@ -1,5 +1,7 @@
.. _vhostcommands:
+.. note:: For a complete list of CLI Debug commands refer to the Debug CLI section of the `Source Code Documents <https://docs.fd.io/vpp/18.07/clicmd.html>`_ .
+
Vhost User Commands
===================
diff --git a/docs/reference/cmdreference/vhost/vhostuser.rst b/docs/reference/cmdreference/vhost/vhostuser.rst
index a21c314404c..8b34ec6e8fb 100644
--- a/docs/reference/cmdreference/vhost/vhostuser.rst
+++ b/docs/reference/cmdreference/vhost/vhostuser.rst
@@ -1,7 +1,9 @@
-.. _vhostusercommands:
+.. vhost:
.. toctree::
+.. note:: For a complete list of CLI Debug commands refer to the Debug CLI section of the `Source Code Documents <https://docs.fd.io/vpp/18.07/clicmd.html>`_ .
+
.. _createvhostuser:
Create Vhost-User
@@ -13,7 +15,7 @@ next free index.
There are several parameters associated with a vHost interface:
-- **socket <socket-filename>** - Name of the linux socket used by
+- **socket <*socket-filename*>** - Name of the linux socket used by
hypervisor and VPP to manage the vHost interface. If in '*server*'
mode, VPP will create the socket if it does not already exist. If in
'*client*' mode, hypervisor will create the socket if it does not
@@ -227,10 +229,10 @@ previous example but will include the descriptor table for each queue. The outpu
Virtqueue 1 (RX)
qsz 256 last_avail_idx 0 last_used_idx 0
-
+
Debug Vhost-User
================
-Turn on/off debug for vhost
+Turn on/off debug for vhost.
Summary/Usage
@@ -238,8 +240,8 @@ Summary/Usage
.. code-block:: shell
- debug vhost-user <on | off>.
-
+ debug vhost-user <on | off>
+
Delete Vhost-User
========================
Delete a vHost User interface using the interface name or the software
@@ -252,7 +254,7 @@ Summary/Usage
.. code-block:: shell
- delete vhost-user {<interface> | sw_if_index <sw_idx>}.
+ delete vhost-user {<interface> | sw_if_index <sw_idx>}
Examples
--------