docs: better docs, mv doxygen to sphinx

This patch refactors the VPP sphinx docs
in order to make it easier to consume
for external readers as well as VPP developers.

It also makes sphinx the single source
of documentation, which simplifies maintenance
and operation.

Most important updates are:

- reformat the existing documentation as rst
- split RELEASE.md and move it into separate rst files
- remove section 'events'
- remove section 'archive'
- remove section 'related projects'
- remove section 'feature by release'
- remove section 'Various links'
- make (Configuration reference, CLI docs,
  developer docs) top level items in the list
- move 'Use Cases' as part of 'About VPP'
- move 'Troubleshooting' as part of 'Getting Started'
- move test framework docs into 'Developer Documentation'
- add a 'Contributing' section for gerrit,
  docs and other contributer related infos
- deprecate doxygen and test-docs targets
- redirect the "make doxygen" target to "make docs"

Type: refactor

Change-Id: I552a5645d5b7964d547f99b1336e2ac24e7c209f
Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com>
Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>

1 files changed, 0 insertions, 333 deletions

diff --git a/docs/usecases/contiv/BUG_REPORTS.md b/docs/usecases/contiv/BUG_REPORTS.md
deleted file mode 100644
index 5b9c3cf4875..00000000000
--- a/docs/usecases/contiv/BUG_REPORTS.md
+++ /dev/null
@@ -1,333 +0,0 @@
-# Debugging and Reporting Bugs in Contiv-VPP
-
-## Bug Report Structure
-
-- [Deployment description](#describe-deployment):
-Briefly describes the deployment, where an issue was spotted,
-number of k8s nodes, is DHCP/STN/TAP used.
-
-- [Logs](#collecting-the-logs):
-Attach corresponding logs, at least from the vswitch pods.
-
-- [VPP config](#inspect-vpp-config):
-Attach output of the show commands.
-
-- [Basic Collection Example](#basic-example)
-
-### Describe Deployment
-Since contiv-vpp can be used with different configurations, it is helpful 
-to attach the config that was applied. Either attach `values.yaml` passed to the helm chart,
-or attach the [corresponding part](https://github.com/contiv/vpp/blob/42b3bfbe8735508667b1e7f1928109a65dfd5261/k8s/contiv-vpp.yaml#L24-L38) from the deployment yaml file.
-
-```
-  contiv.yaml: |-
-    TCPstackDisabled: true
-    UseTAPInterfaces: true
-    TAPInterfaceVersion: 2
-    NatExternalTraffic: true
-    MTUSize: 1500
-    IPAMConfig:
-      PodSubnetCIDR: 10.1.0.0/16
-      PodNetworkPrefixLen: 24
-      PodIfIPCIDR: 10.2.1.0/24
-      VPPHostSubnetCIDR: 172.30.0.0/16
-      VPPHostNetworkPrefixLen: 24
-      NodeInterconnectCIDR: 192.168.16.0/24
-      VxlanCIDR: 192.168.30.0/24
-      NodeInterconnectDHCP: False
-```
-
-Information that might be helpful:
- - Whether node IPs are statically assigned, or if DHCP is used
- - STN is enabled
- - Version of TAP interfaces used
- - Output of `kubectl get pods -o wide --all-namespaces`
- 
-
-### Collecting the Logs
-
-The most essential thing that needs to be done when debugging and **reporting an issue**
-in Contiv-VPP is **collecting the logs from the contiv-vpp vswitch containers**.
-
-#### a) Collecting Vswitch Logs Using kubectl
-In order to collect the logs from individual vswitches in the cluster, connect to the master node
-and then find the POD names of the individual vswitch containers:
-
-```
-$ kubectl get pods --all-namespaces | grep vswitch
-kube-system   contiv-vswitch-lqxfp               2/2       Running   0          1h
-kube-system   contiv-vswitch-q6kwt               2/2       Running   0          1h
-```
-
-Then run the following command, with *pod name* replaced by the actual POD name:
-```
-$ kubectl logs <pod name> -n kube-system -c contiv-vswitch
-```
-
-Redirect the output to a file to save the logs, for example:
-
-```
-kubectl logs contiv-vswitch-lqxfp -n kube-system -c contiv-vswitch > logs-master.txt
-```
-
-#### b) Collecting Vswitch Logs Using Docker
-If option a) does not work, then you can still collect the same logs using the plain docker
-command. For that, you need to connect to each individual node in the k8s cluster, and find the container ID of the vswitch container:
-
-```
-$ docker ps | grep contivvpp/vswitch
-b682b5837e52        contivvpp/vswitch                                        "/usr/bin/supervisor…"   2 hours ago         Up 2 hours                              k8s_contiv-vswitch_contiv-vswitch-q6kwt_kube-system_d09b6210-2903-11e8-b6c9-08002723b076_0
-```
-
-Now use the ID from the first column to dump the logs into the `logs-master.txt` file:
-```
-$ docker logs b682b5837e52 > logs-master.txt
-```
-
-#### Reviewing the Vswitch Logs
-
-In order to debug an issue, it is good to start by grepping the logs for the `level=error` string, for example:
-```
-$ cat logs-master.txt | grep level=error
-```
-
-Also, VPP or contiv-agent may crash with some bugs. To check if some process crashed, grep for the string `exit`, for example:
-```
-$ cat logs-master.txt | grep exit
-2018-03-20 06:03:45,948 INFO exited: vpp (terminated by SIGABRT (core dumped); not expected)
-2018-03-20 06:03:48,948 WARN received SIGTERM indicating exit request
-```
-
-#### Collecting the STN Daemon Logs
-In STN (Steal The NIC) deployment scenarios, often need to collect and review the logs
-from the STN daemon. This needs to be done on each node:
-```
-$ docker logs contiv-stn > logs-stn-master.txt
-```
-
-#### Collecting Logs in Case of Crash Loop
-If the vswitch is crashing in a loop (which can be determined by increasing the number in the `RESTARTS`
-column of the `kubectl get pods --all-namespaces` output), the `kubectl logs` or `docker logs` would
-give us the logs of the latest incarnation of the vswitch. That might not be the original root cause
-of the very first crash, so in order to debug that, we need to disable k8s health check probes to not
-restart the vswitch after the very first crash. This can be done by commenting-out the `readinessProbe`
-and `livenessProbe` in the contiv-vpp deployment YAML:
-
-```diff
-diff --git a/k8s/contiv-vpp.yaml b/k8s/contiv-vpp.yaml
-index 3676047..ffa4473 100644
---- a/k8s/contiv-vpp.yaml
-+++ b/k8s/contiv-vpp.yaml
-@@ -224,18 +224,18 @@ spec:
-           ports:
-             # readiness + liveness probe
-             - containerPort: 9999
--          readinessProbe:
--            httpGet:
--              path: /readiness
--              port: 9999
--            periodSeconds: 1
--            initialDelaySeconds: 15
--          livenessProbe:
--            httpGet:
--              path: /liveness
--              port: 9999
--            periodSeconds: 1
--            initialDelaySeconds: 60
-+ #         readinessProbe:
-+ #           httpGet:
-+ #             path: /readiness
-+ #             port: 9999
-+ #           periodSeconds: 1
-+ #           initialDelaySeconds: 15
-+ #         livenessProbe:
-+ #           httpGet:
-+ #             path: /liveness
-+ #             port: 9999
-+ #           periodSeconds: 1
-+ #           initialDelaySeconds: 60
-           env:
-             - name: MICROSERVICE_LABEL
-               valueFrom:
-```
-
-If VPP is the crashing process, please follow the \[CORE_FILES\](CORE_FILES.html) guide and provide the coredump file.
-
-
-### Inspect VPP Config
-Inspect the following areas:
-- Configured interfaces (issues related basic node/pod connectivity issues):
-```
-vpp# sh int addr
-GigabitEthernet0/9/0 (up):
-  192.168.16.1/24
-local0 (dn):
-loop0 (up):
-  l2 bridge bd_id 1 bvi shg 0
-  192.168.30.1/24
-tapcli-0 (up):
-  172.30.1.1/24
-```
-
-- IP forwarding table:
-```
-vpp# sh ip fib
-ipv4-VRF:0, fib_index:0, flow hash:[src dst sport dport proto ] locks:[src:(nil):2, src:adjacency:3, src:default-route:1, ]
-0.0.0.0/0
-  unicast-ip4-chain
-  [@0]: dpo-load-balance: [proto:ip4 index:1 buckets:1 uRPF:0 to:[7:552]]
-    [0] [@0]: dpo-drop ip4
-0.0.0.0/32
-  unicast-ip4-chain
-  [@0]: dpo-load-balance: [proto:ip4 index:2 buckets:1 uRPF:1 to:[0:0]]
-    [0] [@0]: dpo-drop ip4
-
-... 
-...
-
-255.255.255.255/32
-  unicast-ip4-chain
-  [@0]: dpo-load-balance: [proto:ip4 index:5 buckets:1 uRPF:4 to:[0:0]]
-    [0] [@0]: dpo-drop ip4
-```
-- ARP Table:
-```
-vpp# sh ip arp
-    Time           IP4       Flags      Ethernet              Interface       
-    728.6616  192.168.16.2     D    08:00:27:9c:0e:9f GigabitEthernet0/8/0
-    542.7045  192.168.30.2     S    1a:2b:3c:4d:5e:02 loop0
-      1.4241   172.30.1.2      D    86:41:d5:92:fd:24 tapcli-0
-     15.2485    10.1.1.2      SN    00:00:00:00:00:02 tapcli-1
-    739.2339    10.1.1.3      SN    00:00:00:00:00:02 tapcli-2
-    739.4119    10.1.1.4      SN    00:00:00:00:00:02 tapcli-3
-```
-- NAT configuration (issues related to services):
-```
-DBGvpp# sh nat44 addresses
-NAT44 pool addresses:
-192.168.16.10
-  tenant VRF independent
-  0 busy udp ports
-  0 busy tcp ports
-  0 busy icmp ports
-NAT44 twice-nat pool addresses:
-```
-```
-vpp# sh nat44 static mappings 
-NAT44 static mappings:
- tcp local 192.168.42.1:6443 external 10.96.0.1:443 vrf 0  out2in-only
- tcp local 192.168.42.1:12379 external 192.168.42.2:32379 vrf 0  out2in-only
- tcp local 192.168.42.1:12379 external 192.168.16.2:32379 vrf 0  out2in-only
- tcp local 192.168.42.1:12379 external 192.168.42.1:32379 vrf 0  out2in-only
- tcp local 192.168.42.1:12379 external 192.168.16.1:32379 vrf 0  out2in-only
- tcp local 192.168.42.1:12379 external 10.109.143.39:12379 vrf 0  out2in-only
- udp local 10.1.2.2:53 external 10.96.0.10:53 vrf 0  out2in-only
- tcp local 10.1.2.2:53 external 10.96.0.10:53 vrf 0  out2in-only
-```
-```
-vpp# sh nat44 interfaces
-NAT44 interfaces:
- loop0 in out
- GigabitEthernet0/9/0 out
- tapcli-0 in out
-```
-```
-vpp# sh nat44 sessions
-NAT44 sessions:
-  192.168.20.2: 0 dynamic translations, 3 static translations
-  10.1.1.3: 0 dynamic translations, 0 static translations
-  10.1.1.4: 0 dynamic translations, 0 static translations
-  10.1.1.2: 0 dynamic translations, 6 static translations
-  10.1.2.18: 0 dynamic translations, 2 static translations
-```
-- ACL config (issues related to policies):
-```
-vpp# sh acl-plugin acl
-```
-- "Steal the NIC (STN)" config (issues related to host connectivity when STN is active):
-```
-vpp# sh stn rules 
-- rule_index: 0
-  address: 10.1.10.47
-  iface: tapcli-0 (2)
-  next_node: tapcli-0-output (410)
-```
-- Errors:
-```
-vpp# sh errors
-```
-- Vxlan tunnels:
-```
-vpp# sh vxlan tunnels
-```
-- Vxlan tunnels:
-```
-vpp# sh vxlan tunnels
-```
-- Hardware interface information:
-```
-vpp# sh hardware-interfaces
-```
-
-### Basic Example
-
-[contiv-vpp-bug-report.sh][1] is an example of a script that may be a useful starting point to gathering the above information using kubectl.  
-
-Limitations: 
-- The script does not include STN daemon logs nor does it handle the special
-  case of a crash loop
-  
-Prerequisites:
-- The user specified in the script must have passwordless access to all nodes
-  in the cluster; on each node in the cluster the user must have passwordless
-  access to sudo.
-  
-#### Setting up Prerequisites
-To enable logging into a node without a password, copy your public key to the following
-node:
-```
-ssh-copy-id <user-id>@<node-name-or-ip-address>
-```
-
-To enable running sudo without a password for a given user, enter:
-```
-$ sudo visudo
-```
-
-Append the following entry to run ALL command without a password for a given
-user:
-```
-<userid> ALL=(ALL) NOPASSWD:ALL
-```
-
-You can also add user `<user-id>` to group `sudo` and edit the `sudo`
-entry as follows:
-
-```
-# Allow members of group sudo to execute any command
-%sudo	ALL=(ALL:ALL) NOPASSWD:ALL
-```
-
-Add user `<user-id>` to group `<group-id>` as follows:
-```
-sudo adduser <user-id> <group-id>
-```
-or as follows:
-```
-usermod -a -G <group-id> <user-id>
-```
-#### Working with the Contiv-VPP Vagrant Test Bed 
-The script can be used to collect data from the [Contiv-VPP test bed created with Vagrant][2].
-To collect debug information from this Contiv-VPP test bed, do the
-following steps:
-* In the directory where you created your vagrant test bed, do:
-```
-  vagrant ssh-config > vagrant-ssh.conf
-```
-* To collect the debug information do:
-```
-  ./contiv-vpp-bug-report.sh -u vagrant -m k8s-master -f <path-to-your-vagrant-ssh-config-file>/vagrant-ssh.conf
-```
-
-[1]: https://github.com/contiv/vpp/tree/master/scripts/contiv-vpp-bug-report.sh
-[2]: https://github.com/contiv/vpp/blob/master/vagrant/README.md