summaryrefslogtreecommitdiffstats
path: root/docs/usecases/contiv/VPP_CONFIG.md
diff options
context:
space:
mode:
authorNathan Skrzypczak <nathan.skrzypczak@gmail.com>2021-08-19 11:38:06 +0200
committerDave Wallace <dwallacelf@gmail.com>2021-10-13 23:22:32 +0000
commit9ad39c026c8a3c945a7003c4aa4f5cb1d4c80160 (patch)
tree3cca19635417e28ae381d67ae31c75df2925032d /docs/usecases/contiv/VPP_CONFIG.md
parentf47122e07e1ecd0151902a3cabe46c60a99bee8e (diff)
docs: better docs, mv doxygen to sphinx
This patch refactors the VPP sphinx docs in order to make it easier to consume for external readers as well as VPP developers. It also makes sphinx the single source of documentation, which simplifies maintenance and operation. Most important updates are: - reformat the existing documentation as rst - split RELEASE.md and move it into separate rst files - remove section 'events' - remove section 'archive' - remove section 'related projects' - remove section 'feature by release' - remove section 'Various links' - make (Configuration reference, CLI docs, developer docs) top level items in the list - move 'Use Cases' as part of 'About VPP' - move 'Troubleshooting' as part of 'Getting Started' - move test framework docs into 'Developer Documentation' - add a 'Contributing' section for gerrit, docs and other contributer related infos - deprecate doxygen and test-docs targets - redirect the "make doxygen" target to "make docs" Type: refactor Change-Id: I552a5645d5b7964d547f99b1336e2ac24e7c209f Signed-off-by: Nathan Skrzypczak <nathan.skrzypczak@gmail.com> Signed-off-by: Andrew Yourtchenko <ayourtch@gmail.com>
Diffstat (limited to 'docs/usecases/contiv/VPP_CONFIG.md')
-rw-r--r--docs/usecases/contiv/VPP_CONFIG.md153
1 files changed, 0 insertions, 153 deletions
diff --git a/docs/usecases/contiv/VPP_CONFIG.md b/docs/usecases/contiv/VPP_CONFIG.md
deleted file mode 100644
index 0d0559372cb..00000000000
--- a/docs/usecases/contiv/VPP_CONFIG.md
+++ /dev/null
@@ -1,153 +0,0 @@
-## Creating VPP Startup Configuration
-This document describes how to create the VPP startup configuration
-file located at `/etc/vpp/contiv-vswitch.conf`.
-
-### Hardware Interface Configuration
-#### Single-NIC Configuration
-You need to configure hardware interfaces for use by VPP. First, find out the PCI address of the host's network interface. On
-Debian-based distributions, you can use `lshw`:
-
-```
-sudo lshw -class network -businfo
-Bus info Device Class Description
-========================================================
-pci@0000:03:00.0 ens160 network VMXNET3 Ethernet Controller
-```
-
-In our case, it would be the `ens3` interface with the PCI address
-`0000:00:03.0`
-
-Now, add or modify the VPP startup config file (`/etc/vpp/contiv-vswitch.conf`)
-to contain the proper PCI address:
-```
-unix {
- nodaemon
- cli-listen /run/vpp/cli.sock
- cli-no-pager
- coredump-size unlimited
- full-coredump
- poll-sleep-usec 100
-}
-nat {
- endpoint-dependent
-}
-dpdk {
- dev 0000:00:03.0
-}
-api-trace {
- on
- nitems 500
-}
-```
-#### Multi-NIC Configuration
-Similar to the single-NIC configuration, use command *lshw* to find the PCI
-addresses of all the NICs in the system, for example:
-
-```
-$ sudo lshw -class network -businfo
-Bus info Device Class Description
-====================================================
-pci@0000:00:03.0 ens3 network Virtio network device
-pci@0000:00:04.0 ens4 network Virtio network device
-```
-
-In the example above, `ens3` would be the primary interface and `ens4` would
-be the interface that would be used by VPP. The PCI address of the `ens4`
-interface would be `0000:00:04.0`.
-
-Make sure the selected interface is *shut down*, otherwise VPP
-will not grab it:
-```
-sudo ip link set ens4 down
-```
-
-Now, add or modify the VPP startup config file in `/etc/vpp/contiv-vswitch.conf`
-to contain the proper PCI address:
-```
-unix {
- nodaemon
- cli-listen /run/vpp/cli.sock
- cli-no-pager
- coredump-size unlimited
- full-coredump
- poll-sleep-usec 100
-}
-nat {
- endpoint-dependent
-}
-dpdk {
- dev 0000:00:04.0
-}
-api-trace {
- on
- nitems 500
-}
-```
-If assigning multiple NICs to VPP you will need to include each NIC's PCI address
-in the dpdk stanza in `/etc/vpp/contiv-vswitch.conf`.
-
-##### Assigning all NICs to VPP
-On a multi-NIC node, it is also possible to assign all NICs from the kernel for
-use by VPP. First, you need to install the STN daemon, as described [here][1],
-since you will want the NICs to revert to the kernel if VPP crashes.
-
-You also need to configure the NICs in the VPP startup config file
-in `/etc/vpp/contiv-vswitch.conf`. For example, to use both the primary and
-secondary NIC, in a two-NIC node, your VPP startup config file would look
-something like this:
-
-```
-unix {
- nodaemon
- cli-listen /run/vpp/cli.sock
- cli-no-pager
- coredump-size unlimited
- full-coredump
- poll-sleep-usec 100
-}
-nat {
- endpoint-dependent
-}
-dpdk {
- dev 0000:00:03.0
- dev 0000:00:04.0
-}
-api-trace {
- on
- nitems 500
-}
-```
-
-#### Installing `lshw` on CentOS/RedHat/Fedora
-Note: On CentOS/RedHat/Fedora distributions, `lshw` may not be available
-by default, install it by
-```
-sudo yum -y install lshw
-```
-
-### Power-saving Mode
-In regular operation, VPP takes 100% of one CPU core at all times (poll loop).
-If high performance and low latency is not required you can "slow-down"
-the poll-loop and drastically reduce CPU utilization by adding the following
-stanza to the `unix` section of the VPP startup config file:
-```
-unix {
- ...
- poll-sleep-usec 100
- ...
-}
-```
-The power-saving mode is especially useful in VM-based development environments
-running on laptops or less powerful servers.
-
-### VPP API Trace
-To troubleshoot VPP configuration issues in production environments, it is
-strongly recommended to configure VPP API trace. This is done by adding the
-following stanza to the VPP startup config file:
-```
-api-trace {
- on
- nitems 500
-}
-```
-You can set the size of the trace buffer with the <nitems> attribute.