summaryrefslogtreecommitdiffstats
path: root/docs/usecases
diff options
context:
space:
mode:
authorMatthew Giassa <mgiassa@cisco.com>2021-11-19 17:06:11 +0000
committerDave Wallace <dwallacelf@gmail.com>2021-12-01 18:41:20 +0000
commit4a0dd383cf363ba7df105b87838435ef1cfa4fd7 (patch)
treeb6f7701433601af5fc3c44ce3b815efc668be0d9 /docs/usecases
parent342a5d472fe8f9aafd7ff50521d94c39a112c961 (diff)
docs: add VPP Container Testbench example and lab
Adding a "VPP container testbench" (pair of Docker containers plus helper scripts to test Linux and VPP interfaces). Will be part of a larger set of labs/exercises/tutorials. Putting this baseline setup up for review first to see if the community sees use/value in it. If so, additional exercises using the testbench will be added gradually. Type: improvement Signed-off-by: Matthew Giassa <mgiassa@cisco.com> Change-Id: I582310f7355419e907d575f640482ca49cbb282f
Diffstat (limited to 'docs/usecases')
-rw-r--r--docs/usecases/vpp_testbench/index.rst180
-rw-r--r--docs/usecases/vpp_testbench/labs/intro_to_vpp/index.rst257
-rw-r--r--docs/usecases/vpp_testbench/src/Dockerfile.vpp_testbench82
-rw-r--r--docs/usecases/vpp_testbench/src/Dockerfile.vpp_testbench.dockerignore14
-rw-r--r--docs/usecases/vpp_testbench/src/Makefile147
-rwxr-xr-xdocs/usecases/vpp_testbench/src/entrypoint_client.sh150
-rwxr-xr-xdocs/usecases/vpp_testbench/src/entrypoint_server.sh176
-rwxr-xr-xdocs/usecases/vpp_testbench/src/vpp_testbench_helpers.sh273
8 files changed, 1279 insertions, 0 deletions
diff --git a/docs/usecases/vpp_testbench/index.rst b/docs/usecases/vpp_testbench/index.rst
new file mode 100644
index 00000000000..744fa864766
--- /dev/null
+++ b/docs/usecases/vpp_testbench/index.rst
@@ -0,0 +1,180 @@
+VPP Container Test Bench
+========================
+
+This project spins up a pair of Docker containers, both of which are running
+Ubuntu 20.04 "Focal Fossa" (x86_64) along with VPP. At run-time, the containers
+will attempt to create various links between each other, using both the Linux
+networking stack as well as VPP, and will then send some simple traffic
+back-and-forth (i.e. ICMP echo/ping requests and HTTP GET requests).
+
+The intent of this example is to provide a relatively simple example of
+connecting containers via VPP and allowing others to use it as a springboard of
+sorts for their own projects and examples. Besides Docker and a handful of
+common Linux command-line utlities, not much else is required to build this
+example (due to most of the dependencies being lumped inside the containers
+themselves).
+
+Instructions - Short Version
+----------------------------
+
+The use of an Ubuntu 20.04 LTS Linux distro, running on x86_64 hardware, is
+required for these labs. If your current workstation/PC/laptop/etc. is
+unable to run such a setup natively, the reader is now tasked with figuring out
+how to get such a setup in order. This can be accomplished, for example,
+through the use of virtual machines via tools like VirtualBox, or ``vagrant``.
+As this can be a time consuming task for readers new to virtual machines, we
+leave it as an exercise for the reader, as it is impractical to provide support
+for such a task in this narrow/focused set of labs and tutorials.
+
+This being said, it's quite probable that one could use these labs on different
+flavors/distros of Linux, since the bulk of the work involved takes place
+inside containers which are always set to use an Ubuntu 20.04 baseline.
+However, for the sake of these labs, any other such setup is not supported.
+
+- Replicate the file listings at the end of this document
+ (:ref:`sec_file_listings_vpp_testbench`). You can also directly acquire a
+ copy of these files by cloning the VPP repo, and navigating to the
+ ``docs/usecases/vpp_testbench/src`` path to save yourself the hassle of
+ copy-pasting and naming the files. Once that's done, open a shell, and
+ navigate to the location housing the project files.
+- To build the project, simply run: ``make``
+- To start up the containers and have all the initialization logic take place,
+ run: ``make start``
+- To trigger some basic traffic tests, run: ``make poll``
+- To terminate the containers and clean-up associated resources, run ``make stop``
+- To launch an interactive shell for the "client" container, run ``make
+ shell_client``
+- To launch an interactive shell for the "server" container, run ``make
+ shell_server``
+
+Instructions - Long Version
+---------------------------
+
+Directory Structure and File Purposes
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+First, let's quickly review the purpose of the various files used in this
+project.
+
+* ``vpp_testbench_helpers.sh``: shell variables and helper functions re-used in
+ other scripts in this project. Intended to be sourced (i.e. not intended to
+ be run directly). Some of the helper functions are used at run-time within
+ the containers, while others are intended to be run in the default namespace
+ on the host operating system to help with run-time configuration/bringup of
+ the testbench.
+* ``Dockerfile.vpp_testbench``: used to build the various Docker images used in
+ this project (i.e. so VPP, our test tools, etc.; are all encapsulated within
+ containers rather than being deployed to the host OS).
+* ``Dockerfile.vpp_testbench.dockerignore``: a "permit-list" to restrict what
+ files we permit to be included in our Docker images (helps keep image size
+ down and provides some minor security benefits at build time, at least in
+ general).
+* ``entrypoint_client.sh``: entrypoint script used by the "client" Docker
+ container when it is launched.
+* ``entrypoint_server.sh``: entrypoint script used by the "server" Docker
+ container when it is launched.
+* ``Makefile``: top-level script; used to trigger the artifacts and Docker
+ image builds, provides rules for starting/testing/stopping the containers,
+ etc.
+
+Getting Started
+^^^^^^^^^^^^^^^
+
+First, we'll assume you are running on a Ubuntu 20.04 x86_64 setup (either on a
+bare metal host or in a virtual machine), and have acquirec a copy of the
+project files (either by cloning the VPP git repository, or duplicating them
+from :ref:`sec_file_listings_vpp_testbench`). Now, just run ``make``. The
+process should take a few minutes as it pulls the baseline Ubuntu Docker image,
+applies system/package updates/upgrades via ``apt``, and installs VPP.
+
+Next, one can start up the containers used by the project via ``make start``.
+From this point forward, most testing, experiments, etc.; will likely involve
+modifying/extending the ``poll_containers`` definition inside ``Makefile``
+(probably easiest to just have it invoke a shell script that you write for your
+own testing). Once you've completed various test runs, the entire deployment
+can be cleaned-up via ``make stop``, and the whole process of starting,
+testing, stopping, etc.; can be repeated as needed.
+
+In addition to starting up the containers, ``make start`` will establish
+variaous types of links/connections between the two containers, making use of
+both the Linux network stack, as well as VPP, to handle the "plumbing"
+involved. This is to allow various types of connections between the two
+containers, and to allow the reader to experiment with them (i.e. using
+``vppctl`` to congfigure or trace packets going over VPP-managed links, use
+traditional Linux command line utilities like ``tcpdump``, ``iproute2``,
+``ping``, etc.; to accomplish similar tasks over links managed purely by the
+Linux network stack, etc.). Later labs will also encourage readers to compare
+the two types of links (perhaps some performance metrics/profiling, or similar
+tasks). This testbench project is effectively intended as a baseline workspace
+upon which one may design and run the labs (or your own projects and examples,
+whichever works for you).
+
+Labs
+----
+
+.. toctree::
+ labs/intro_to_vpp/index
+
+Future Labs
+-----------
+
+.. note::
+
+ Coming soon.
+
+- Lab: Writing your First CLI Application (Querying Statistics)
+- Lab: MACSWAP Plugin Revisited
+
+.. _sec_file_listings_vpp_testbench:
+
+File Listings
+-------------
+
+Makefile
+^^^^^^^^
+
+.. literalinclude:: src/Makefile
+ :caption: Makefile
+ :language: Makefile
+ :linenos:
+
+Dockerfile.vpp_testbench
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. literalinclude:: src/Dockerfile.vpp_testbench
+ :caption: Dockerfile.vpp_testbench
+ :language: Dockerfile
+ :linenos:
+
+Dockerfile.vpp_testbench.dockerignore
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. literalinclude:: src/Dockerfile.vpp_testbench.dockerignore
+ :caption: Dockerfile.vpp_testbench.dockerignore
+ :language: Dockerfile
+ :linenos:
+
+vpp_testbench_helpers.sh
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. literalinclude:: src/vpp_testbench_helpers.sh
+ :caption: vpp_testbench_helpers.sh
+ :language: shell
+ :linenos:
+
+entrypoint_client.sh
+^^^^^^^^^^^^^^^^^^^^
+
+.. literalinclude:: src/entrypoint_client.sh
+ :caption: entrypoint_client.sh
+ :language: shell
+ :linenos:
+
+entrypoint_server.sh
+^^^^^^^^^^^^^^^^^^^^
+
+.. literalinclude:: src/entrypoint_server.sh
+ :caption: entrypoint_server.sh
+ :language: shell
+ :linenos:
+
diff --git a/docs/usecases/vpp_testbench/labs/intro_to_vpp/index.rst b/docs/usecases/vpp_testbench/labs/intro_to_vpp/index.rst
new file mode 100644
index 00000000000..0b8acca4d90
--- /dev/null
+++ b/docs/usecases/vpp_testbench/labs/intro_to_vpp/index.rst
@@ -0,0 +1,257 @@
+.. _sec_lab_vpp_intro:
+
+Lab: Taking the VPP Container Testbench for a Spin
+==================================================
+
+Assuming the reader has already acquired the test bench build scripts, let's
+start with building it.
+
+.. code-block:: shell
+ :linenos:
+
+ vagrant@ubuntu-focal$> make
+ # Client image.
+ DOCKER_BUILDKIT=1 docker build \
+ --file Dockerfile.vpp_testbench \
+ --build-arg HEALTHCHECK_PORT=8123 \
+ --tag vpp-testbench-client:local \
+ --target client_img \
+ .
+ ...
+ ...
+ ...
+ DOCKER_BUILDKIT=1 docker build \
+ --file Dockerfile.vpp_testbench \
+ --build-arg HEALTHCHECK_PORT=8123 \
+ --tag vpp-testbench-server:local \
+ --target server_img \
+ .
+ ...
+ ...
+ ...
+ => exporting to image
+ => => exporting layers
+ => => writing image
+ => => naming to docker.io/library/vpp-testbench-server:local
+ 0.0s
+ Done.
+
+
+Now, let's start up our newly built images as a pair of containers. The various
+hashes throughout this document will differ from those shown in your own
+console (perfectly fine). First, let's assume there are no running containers
+on your system. We'll verify via ``docker ps``:
+
+
+.. code-block:: shell
+ :linenos:
+
+ vagrant@ubuntu-focal$> docker ps
+ CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
+
+
+OK: good initial conditions. Now, let's launch the containers:
+
+.. code-block:: shell
+ :linenos:
+
+ vagrant@ubuntu-focal$> make start
+ # Create Docker bridge network.
+ bash -c " . vpp_testbench_helpers.sh; host_only_create_docker_networks; "
+ 6e071e533e239380b2fe92d6e0844c42736ec186226fbb20d89706f9a80f935f
+ # Launch the containers.
+ bash -c " . vpp_testbench_helpers.sh; host_only_run_testbench_client_container
+ vpp-testbench-client:local; host_only_run_testbench_server_container
+ vpp-testbench-server:local; "
+ 720fed0a94fd715694d73a41317f05a3f36860a6d5ae54db2d7cb7f2dcaf7924
+ ccf166993d09e399f7b10d372c47cc9e72ce6092ef70ea206c699263da844e1b
+ # Entrypoint scripts will bring up the various links.
+ # Use "docker ps" to check status of containers, see if their health
+ # probes are working as expected (i.e. "health"), etc.
+
+
+Now, we can use ``docker ps`` to verify if the containers are up and running:
+
+.. code-block:: shell
+ :linenos:
+
+ vagrant@ubuntu-focal$> docker ps
+ CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
+ 7d8e3ab35111 vpp-testbench-server:local "/entrypoint.sh" 3 seconds ago Up 2 seconds (health: starting) vpp-testbench-server
+ cc01e64b12da vpp-testbench-client:local "/entrypoint.sh" 4 seconds ago Up 3 seconds (health: starting) vpp-testbench-client
+
+
+Looking good so far. However, note the "health" status of the containers.
+They're not yet ready. We can re-execute the ``docker ps`` command occasionally
+until the containers are ready:
+
+.. code-block:: shell
+ :linenos:
+
+ vagrant@ubuntu-focal$> while true; do docker ps; sleep 1; done
+ CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
+ 42e9bcea7c58 vpp-testbench-server:local "/entrypoint.sh" 1 second ago Up Less than a second (health: starting) vpp-testbench-server
+ 710287b40bd3 vpp-testbench-client:local "/entrypoint.sh" 2 seconds ago Up Less than a second (health: starting) vpp-testbench-client
+ 42e9bcea7c58 vpp-testbench-server:local "/entrypoint.sh" 30 seconds ago Up 29 seconds (health: starting) vpp-testbench-server
+ 710287b40bd3 vpp-testbench-client:local "/entrypoint.sh" 31 seconds ago Up 30 seconds (healthy) vpp-testbench-client
+ CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
+ 42e9bcea7c58 vpp-testbench-server:local "/entrypoint.sh" 31 seconds ago Up 30 seconds (healthy) vpp-testbench-server
+ 710287b40bd3 vpp-testbench-client:local "/entrypoint.sh" 32 seconds ago Up 31 seconds (healthy) vpp-testbench-client
+
+
+Not the most elegant approach, but it works. Onward.
+
+.. note::
+
+ How would one automate this step so that we're not having to manually watch
+ the console until the containers are ready? What's something that we could
+ put into a script our our ``Makefile`` to poll the containers until they're
+ ready to use?
+
+ .. raw:: html
+
+ <details>
+ <summary><a>Spoiler</a></summary>
+
+ .. code-block:: shell
+
+ # "Direct" approach.
+ while true; do
+ [ '"healthy"' = docker inspect --format "{{json .State.Health.Status }}" vpp-testbench-client] && break
+ done
+
+ # Could also use awk/grep/etc. against the output of "docker ps".
+
+ .. raw:: html
+
+ </details>
+
+Now that our containers are up and running, let's drop a shell into the
+"client" container:
+
+.. code-block:: shell
+ :linenos:
+
+ vagrant@ubuntu-focal$> make shell_client
+
+First, let's take a look at the default network configuration.
+
+.. code-block:: shell
+ :linenos:
+
+ root@478ab126035e:/work# ip a
+ 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
+ link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
+ inet 127.0.0.1/8 scope host lo
+ valid_lft forever preferred_lft forever
+ 2: vxlan-vid-42: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1450 qdisc noqueue state UNKNOWN group default qlen 1000
+ link/ether 3a:2c:19:cb:ca:35 brd ff:ff:ff:ff:ff:ff
+ inet 169.254.10.1/24 scope global vxlan-vid-42
+ valid_lft forever preferred_lft forever
+ 3: vpp-tap-0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UNKNOWN group default qlen 1000
+ link/ether 02:fe:c5:52:63:12 brd ff:ff:ff:ff:ff:ff
+ inet 169.254.12.1/24 scope global vpp-tap-0
+ valid_lft forever preferred_lft forever
+ 635: eth0@if636: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default
+ link/ether 02:42:a9:fe:00:01 brd ff:ff:ff:ff:ff:ff link-netnsid 0
+ inet 169.254.0.1/24 brd 169.254.0.255 scope global eth0
+ valid_lft forever preferred_lft forever
+
+Let's also enumerate the interfaces managed by VPP. For the help of the reader,
+there is a shell function, ``vc``, which just launches ``vppctl`` with some
+helpful default arguments.
+
+.. code-block:: shell
+ :linenos:
+
+ root@478ab126035e:/work# type vc
+ vc is a function
+ vc ()
+ {
+ vppctl -s "${VPP_SOCK}" "${@}"
+ }
+ root@478ab126035e:/work# vc
+ _______ _ _ _____ ___
+ __/ __/ _ \ (_)__ | | / / _ \/ _ \
+ _/ _// // / / / _ \ | |/ / ___/ ___/
+ /_/ /____(_)_/\___/ |___/_/ /_/
+
+ vpp# show int
+ Name Idx State MTU (L3/IP4/IP6/MPLS) Counter Count
+ local0 0 down 0/0/0/0
+ memif0/0 1 up 9000/0/0/0 rx packets 7
+ rx bytes 521
+ tx packets 7
+ tx bytes 503
+ tap0 2 up 9000/0/0/0 rx packets 7
+ rx bytes 503
+ tx packets 7
+ tx bytes 521
+ vpp#
+
+
+.. note::
+
+ One more exercise for the reader:
+ 1. From the client container, how would you ping the server container on the
+ Linux-managed VXLAN interface?
+ 2. From the client container, how would you ping the server container on the
+ VPP-managed TAP interface?
+ 3. A couple trivial web servers (using ``netcat``) are running on the server
+ container. Besides looking at the ``Makefile`` recipes, how could one
+ determine what ports and interfaces these servers are bound to, and
+ how would one issue an HTTP GET query against them from the client
+ container? (hint: you're allowed to log-in to the server container via
+ ``make shell_server``, and the ``netstat`` command may be of use).
+
+ .. raw:: html
+
+ <details>
+ <summary><a>Spoiler</a></summary>
+
+ .. code-block:: shell
+
+ 1. ping 169.254.10.2
+ 2. ping 169.254.12.2
+ 3. make shell_server
+ netstat -tulpn
+ tcp 0 0 169.254.12.2:8000 0.0.0.0:*
+ LISTEN 47/nc
+ tcp 0 0 169.254.10.2:8000 0.0.0.0:*
+ LISTEN 34/nc
+ exit
+ make shell_client
+ root@478ab126035e:/work# curl 169.254.10.2:8000
+ HOST:14f0df855445
+ DATE:Fri Nov 19 16:36:57 UTC 2021
+ Hello from the Linux interface.
+ root@478ab126035e:/work# curl 169.254.12.2:8000
+ HOST:14f0df855445
+ DATE:Fri Nov 19 16:37:04 UTC 2021
+ Hello from the VPP interface.
+ exit
+
+ .. raw:: html
+
+ </details>
+
+Now that we've done some quick exercises, let's clean-up the containers and
+their associated resources.
+
+
+.. code-block:: shell
+ :linenos:
+
+ vagrant@ubuntu-focal$> make stop
+ # Terminate the containers.
+ bash -c " . vpp_testbench_helpers.sh; host_only_kill_testbench_client_container vpp-testbench-client:local; host_only_kill_testbench_server_container vpp-testbench-server:local; "
+ vpp-testbench-client
+ Error: No such container: vpp-testbench-client
+ vpp-testbench-server
+ Error: No such container: vpp-testbench-server
+ # Cleanup Docker bridge network.
+ bash -c " . vpp_testbench_helpers.sh; host_only_destroy_docker_networks; "
+ vpp-testbench-net
+
+That's it for this section.
+
diff --git a/docs/usecases/vpp_testbench/src/Dockerfile.vpp_testbench b/docs/usecases/vpp_testbench/src/Dockerfile.vpp_testbench
new file mode 100644
index 00000000000..f7e19feebbf
--- /dev/null
+++ b/docs/usecases/vpp_testbench/src/Dockerfile.vpp_testbench
@@ -0,0 +1,82 @@
+#------------------------------------------------------------------------------#
+# @brief: Dockerfile for building the VPP testbench project.
+# @author: Matthew Giassa <mgiassa@cisco.com>
+# @copyright: (C) Cisco 2021.
+#------------------------------------------------------------------------------#
+# Baseline image both client and server inherit from.
+FROM ubuntu:focal as baseline
+
+# System packages.
+RUN apt update -y && \
+ DEBIAN_FRONTEND="noninteractive" apt install -y tzdata termshark && \
+ apt install -y \
+ apt-transport-https \
+ axel \
+ bash \
+ binutils \
+ bridge-utils \
+ ca-certificates \
+ coreutils \
+ curl \
+ gnupg \
+ htop \
+ iftop \
+ iproute2 \
+ iptables \
+ iputils-ping \
+ netcat \
+ net-tools \
+ nload \
+ nmap \
+ procps \
+ python3 \
+ python3-dev \
+ python3-pip \
+ sudo \
+ wget \
+ tcpdump \
+ vim \
+ && \
+ apt clean -y
+# Python packages.
+RUN python3 -m pip install \
+ scapy
+
+# VPP.
+RUN bash -c "curl -L https://packagecloud.io/fdio/master/gpgkey | apt-key add -" && \
+ bash -c "echo \"deb [trusted=yes] https://packagecloud.io/fdio/release/ubuntu focal main\" >> /etc/apt/sources.list.d/99fd.io.list" && \
+ apt update && \
+ apt install -y \
+ vpp \
+ vpp-plugin-core \
+ vpp-plugin-dpdk \
+ && \
+ apt clean -y
+
+# Used by client/server entrypoint scripts.
+ADD vpp_testbench_helpers.sh /
+
+
+#------------------------------------------------------------------------------#
+# Client image.
+FROM baseline as client_img
+# Enable a health probe.
+ARG HEALTHCHECK_PORT=8080
+ENV HEALTHCHECK_PORT_RUNTIME="${HEALTHCHECK_PORT}"
+HEALTHCHECK CMD curl --fail "http://localhost:$HEALTHCHECK_PORT_RUNTIME" || exit 1
+# Image-specific overrides.
+ADD ./entrypoint_client.sh /entrypoint.sh
+ENTRYPOINT ["/entrypoint.sh"]
+
+
+#------------------------------------------------------------------------------#
+# Server image.
+FROM baseline as server_img
+# Enable a health probe.
+ARG HEALTHCHECK_PORT=8080
+ENV HEALTHCHECK_PORT_RUNTIME="${HEALTHCHECK_PORT}"
+HEALTHCHECK CMD curl --fail "http://localhost:$HEALTHCHECK_PORT_RUNTIME" || exit 1
+# Image-specific overrides.
+ADD ./entrypoint_server.sh /entrypoint.sh
+ENTRYPOINT ["/entrypoint.sh"]
+
diff --git a/docs/usecases/vpp_testbench/src/Dockerfile.vpp_testbench.dockerignore b/docs/usecases/vpp_testbench/src/Dockerfile.vpp_testbench.dockerignore
new file mode 100644
index 00000000000..0a39eeac666
--- /dev/null
+++ b/docs/usecases/vpp_testbench/src/Dockerfile.vpp_testbench.dockerignore
@@ -0,0 +1,14 @@
+#------------------------------------------------------------------------------#
+# @brief: Dockerfile permit/deny-list for building the VPP testbench
+# project.
+# @author: Matthew Giassa <mgiassa@cisco.com>
+# @copyright: (C) Cisco 2021.
+#------------------------------------------------------------------------------#
+# Ignore everything by default. Permit-list only.
+*
+
+# Entrypoint scripts and other artifacts.
+!entrypoint_client.sh
+!entrypoint_server.sh
+!vpp_testbench_helpers.sh
+
diff --git a/docs/usecases/vpp_testbench/src/Makefile b/docs/usecases/vpp_testbench/src/Makefile
new file mode 100644
index 00000000000..4433edbe4d7
--- /dev/null
+++ b/docs/usecases/vpp_testbench/src/Makefile
@@ -0,0 +1,147 @@
+################################################################################
+# @brief: Makefile for building the VPP testbench example.
+# @author: Matthew Giassa.
+# @copyright: (C) Cisco 2021.
+################################################################################
+#------------------------------------------------------------------------------#
+# Constants and settings.
+#------------------------------------------------------------------------------#
+SHELL=/bin/bash
+.DEFAULT_GOAL: all
+
+# Image names.
+# TODO: semver2 format if we want to publish these to a registry.
+DOCKER_CLIENT_IMG := vpp-testbench-client
+DOCKER_CLIENT_REL := local
+DOCKER_CLIENT_IMG_FULL := $(DOCKER_CLIENT_IMG):$(DOCKER_CLIENT_REL)
+DOCKER_SERVER_IMG := vpp-testbench-server
+DOCKER_SERVER_REL := local
+DOCKER_SERVER_IMG_FULL := $(DOCKER_SERVER_IMG):$(DOCKER_SERVER_REL)
+# Docker build-time settings (and run-time settings as well).
+DOCKER_HEALTH_PROBE_PORT := $(shell bash -c ". vpp_testbench_helpers.sh; host_only_get_docker_health_probe_port")
+
+#------------------------------------------------------------------------------#
+# Functions.
+#------------------------------------------------------------------------------#
+#------------------------------------------------------------------------------#
+# Cleanup running containers, Docker networks, etc.; from previous runs.
+define cleanup_everything
+ # Terminate the containers.
+ bash -c "\
+ . vpp_testbench_helpers.sh; \
+ host_only_kill_testbench_client_container $(DOCKER_CLIENT_IMG_FULL); \
+ host_only_kill_testbench_server_container $(DOCKER_SERVER_IMG_FULL); \
+ "
+
+ # Cleanup Docker bridge network.
+ bash -c "\
+ . vpp_testbench_helpers.sh; \
+ host_only_destroy_docker_networks; \
+ "
+endef
+
+#------------------------------------------------------------------------------#
+# Launch our containers and connect them to a private Docker network for
+# testing.
+define launch_testbench
+ # Create Docker bridge network.
+ bash -c "\
+ . vpp_testbench_helpers.sh; \
+ host_only_create_docker_networks; \
+ "
+
+ # Launch the containers.
+ bash -c "\
+ . vpp_testbench_helpers.sh; \
+ host_only_run_testbench_client_container $(DOCKER_CLIENT_IMG_FULL); \
+ host_only_run_testbench_server_container $(DOCKER_SERVER_IMG_FULL); \
+ "
+
+ # Entrypoint scripts will bring up the various links.
+ # Use "docker ps" to check status of containers, see if their health
+ # probes are working as expected (i.e. "health"), etc.
+endef
+
+#------------------------------------------------------------------------------#
+# Goals.
+#------------------------------------------------------------------------------#
+#------------------------------------------------------------------------------#
+# Default goal.
+.PHONY: all
+all: docker
+ @echo Done.
+
+#------------------------------------------------------------------------------#
+# Build all docker images.
+.PHONY: docker
+docker: Dockerfile.vpp_testbench Dockerfile.vpp_testbench.dockerignore \
+ entrypoint_client.sh entrypoint_server.sh \
+ vpp_testbench_helpers.sh
+ # Client image.
+ DOCKER_BUILDKIT=1 docker build \
+ --file Dockerfile.vpp_testbench \
+ --build-arg HEALTHCHECK_PORT=$(DOCKER_HEALTH_PROBE_PORT) \
+ --tag $(DOCKER_CLIENT_IMG_FULL) \
+ --target client_img \
+ .
+ # Server image.
+ DOCKER_BUILDKIT=1 docker build \
+ --file Dockerfile.vpp_testbench \
+ --build-arg HEALTHCHECK_PORT=$(DOCKER_HEALTH_PROBE_PORT) \
+ --tag $(DOCKER_SERVER_IMG_FULL) \
+ --target server_img \
+ .
+
+#------------------------------------------------------------------------------#
+# Execute end-to-end test via containers.
+.PHONY: test
+test:
+ # Cleanup anything from previous runs.
+ $(call cleanup_everything)
+
+ # Launch our testbench.
+ $(call launch_testbench)
+
+ # Final cleanup.
+ $(call cleanup_everything)
+
+#------------------------------------------------------------------------------#
+# For manually cleaning up a test that fails partway through its execution.
+.PHONY: clean
+clean:
+ $(call cleanup_everything)
+
+#------------------------------------------------------------------------------#
+# For manually launching our testbench for interactive testing.
+.PHONY: start
+start:
+ $(call launch_testbench)
+
+#------------------------------------------------------------------------------#
+# For manually stopping (and cleaning up) our testbench.
+.PHONY: stop
+stop:
+ $(call cleanup_everything)
+
+#------------------------------------------------------------------------------#
+# Create an interactive shell session connected to the client container (for
+# manual testing). Typically preceded by "make start", and concluded with
+# "make stop" after exiting the shell.
+.PHONY: shell_client
+shell_client:
+ bash -c "\
+ . vpp_testbench_helpers.sh; \
+ host_only_shell_client_container; \
+ "
+
+#------------------------------------------------------------------------------#
+# Create an interactive shell session connected to the server container (for
+# manual testing). Typically preceded by "make start", and concluded with
+# "make stop" after exiting the shell.
+.PHONY: shell_server
+shell_server:
+ bash -c "\
+ . vpp_testbench_helpers.sh; \
+ host_only_shell_server_container; \
+ "
+
diff --git a/docs/usecases/vpp_testbench/src/entrypoint_client.sh b/docs/usecases/vpp_testbench/src/entrypoint_client.sh
new file mode 100755
index 00000000000..432c2769730
--- /dev/null
+++ b/docs/usecases/vpp_testbench/src/entrypoint_client.sh
@@ -0,0 +1,150 @@
+#!/bin/bash
+################################################################################
+# @brief: Launcher/entrypoint script plus helper functions for "client
+# side" container in the VPP testbench.
+# @author: Matthew Giassa <mgiassa@cisco.com>
+# @copyright: (C) Cisco 2021.
+################################################################################
+
+################################################################################
+# Dependencies.
+################################################################################
+# Import common settings for server and client. This is supplied via the
+# Dockerfile build.
+# shellcheck disable=SC1091
+. vpp_testbench_helpers.sh
+
+################################################################################
+# Globals.
+################################################################################
+# VPP instance socket.
+export VPP_SOCK=/run/vpp/vpp.testbench-client.sock
+# Alias for vppctl that uses the correct socket name.
+export VPPCTL="vppctl -s ${VPP_SOCK}"
+# Our "Docker bridge network". Don't change this value.
+export NET_IF_DOCKER="eth0"
+# Name of link associated with our VXLAN.
+export LINK_VXLAN_LINUX="vxlan-vid-${VXLAN_ID_LINUX}"
+
+################################################################################
+# Function definitions.
+################################################################################
+#------------------------------------------------------------------------------#
+# @brief: Alias for vppctl (knowing which API socket to use).
+function vc()
+{
+ vppctl -s "${VPP_SOCK}" "${@}"
+}
+
+#------------------------------------------------------------------------------#
+# @brief: Used to initialize/configure the client container once it's up and
+# running.
+function context_create()
+{
+ set -x
+ echo "Running client. Host: $(hostname)"
+ local mtu
+
+ # Setup VXLAN overlay.
+ ip link add "${LINK_VXLAN_LINUX}" \
+ type vxlan \
+ id "${VXLAN_ID_LINUX}" \
+ dstport "${VXLAN_PORT}" \
+ local "${CLIENT_BRIDGE_IP_DOCKER}" \
+ group "${MC_VXLAN_ADDR_LINUX}" \
+ dev "${NET_IF_DOCKER}" \
+ ttl 1
+ ip link set "${LINK_VXLAN_LINUX}" up
+ ip addr add "${CLIENT_VXLAN_IP_LINUX}/${MASK_VXLAN_LINUX}" dev "${LINK_VXLAN_LINUX}"
+
+ # Get MTU of interface. VXLAN must use a smaller value due to overhead.
+ mtu="$(cat /sys/class/net/${NET_IF_DOCKER}/mtu)"
+
+ # Decrease VXLAN MTU. This should already be handled for us by iproute2, but
+ # just being cautious.
+ ip link set dev "${LINK_VXLAN_LINUX}" mtu "$((mtu - 50))"
+
+ # Bring-up VPP and create tap interfaces and VXLAN tunnel.
+ vpp \
+ unix '{' log /tmp/vpp1.log full-coredump cli-listen ${VPP_SOCK} '}' \
+ api-segment '{' prefix vpp1 '}' \
+ api-trace '{' on '}' \
+ dpdk '{' uio-driver uio_pci_generic no-pci '}'
+
+ # Wait for VPP to come up.
+ while ! ${VPPCTL} show log; do
+ sleep 1
+ done
+
+ # Bring up the memif interface and assign an IP to it.
+ ${VPPCTL} create interface memif id 0 slave
+ sleep 1
+ ${VPPCTL} set int state memif0/0 up
+ ${VPPCTL} set int ip address memif0/0 "${CLIENT_VPP_MEMIF_IP}/${VPP_MEMIF_NM}"
+
+ # Create VPP-controlled tap interface bridged to the memif.
+ ${VPPCTL} create tap id 0 host-if-name vpp-tap-0
+ sleep 1
+ ${VPPCTL} set interface state tap0 up
+ ip addr add "${CLIENT_VPP_TAP_IP_MEMIF}/${VPP_TAP_NM}" dev vpp-tap-0
+ ${VPPCTL} set interface l2 bridge tap0 "${VPP_BRIDGE_DOMAIN_TAP}"
+ ${VPPCTL} set interface l2 bridge memif0/0 "${VPP_BRIDGE_DOMAIN_TAP}"
+}
+
+#------------------------------------------------------------------------------#
+# @brief: Used to shutdown/cleanup the client container.
+function context_destroy()
+{
+ # OS will reclaim interfaces and resources when container is terminated.
+ :
+}
+
+#------------------------------------------------------------------------------#
+# @brief: Client worker loop to keep the container alive. Just idles.
+function context_loop()
+{
+ # Sleep indefinitely (to keep container alive for testing).
+ tail -f /dev/null
+}
+
+#------------------------------------------------------------------------------#
+# @brief: Launches a minimalistic web server via netcat. The Dockerfile
+# associated with this project is configured to treat the web server
+# replying with "200 OK" as a sort of simple health probe.
+function health_check_init()
+{
+ while true; do
+ echo -e "HTTP/1.1 200 OK\n\nHOST:$(hostname)\nDATE:$(date)" \
+ | nc -l -p "${DOCKER_HEALTH_PROBE_PORT}" -q 1
+ done
+}
+
+#------------------------------------------------------------------------------#
+# @brief: Main/default entry point.
+function main()
+{
+ # Make sure we always cleanup.
+ trap context_destroy EXIT
+
+ # Bring up interfaces.
+ context_create
+
+ # Enable health check responder.
+ health_check_init &
+
+ # Enter our worker loop.
+ context_loop
+}
+
+#------------------------------------------------------------------------------#
+# Script is generally intended to be sourced and individual functions called.
+# If just run as a standalone script, assume it's being used as the entrypoint
+# for a Docker container.
+if [ "${BASH_SOURCE[0]}" -ef "$0" ]; then
+ # Being run. Launch main.
+ main "${@}"
+else
+ # Being sourced. Do nothing.
+ :
+fi
+
diff --git a/docs/usecases/vpp_testbench/src/entrypoint_server.sh b/docs/usecases/vpp_testbench/src/entrypoint_server.sh
new file mode 100755
index 00000000000..755472a72bf
--- /dev/null
+++ b/docs/usecases/vpp_testbench/src/entrypoint_server.sh
@@ -0,0 +1,176 @@
+#!/bin/bash
+################################################################################
+# @brief: Launcher/entrypoint script plus helper functions for "server
+# side" container in the VPP testbench.
+# @author: Matthew Giassa <mgiassa@cisco.com>
+# @copyright: (C) Cisco 2021.
+################################################################################
+
+################################################################################
+# Dependencies.
+################################################################################
+# Import common settings for server and client. This is supplied via the
+# Dockerfile build.
+# shellcheck disable=SC1091
+. vpp_testbench_helpers.sh
+
+################################################################################
+# Globals.
+################################################################################
+# VPP instance socket.
+export VPP_SOCK=/run/vpp/vpp.testbench-server.sock
+# Alias for vppctl that uses the correct socket name.
+export VPPCTL="vppctl -s ${VPP_SOCK}"
+# Our "Docker bridge network". Don't change this value.
+export NET_IF_DOCKER="eth0"
+# Name of link associated with our VXLAN.
+export LINK_VXLAN_LINUX="vxlan-vid-${VXLAN_ID_LINUX}"
+
+################################################################################
+# Function definitions.
+################################################################################
+#------------------------------------------------------------------------------#
+# @brief: Alias for vppctl (knowing which API socket to use).
+function vc()
+{
+ vppctl -s "${VPP_SOCK}" "${@}"
+}
+
+#------------------------------------------------------------------------------#
+# @brief: Used to initialize/configure the server container once it's up and
+# running.
+function context_create()
+{
+ set -x
+ echo "Running server. Host: $(hostname)"
+ local mtu
+
+ # Setup VXLAN overlay.
+ ip link add "${LINK_VXLAN_LINUX}" \
+ type vxlan \
+ id "${VXLAN_ID_LINUX}" \
+ dstport "${VXLAN_PORT}" \
+ local "${SERVER_BRIDGE_IP_DOCKER}" \
+ group "${MC_VXLAN_ADDR_LINUX}" \
+ dev "${NET_IF_DOCKER}" \
+ ttl 1
+ ip link set "${LINK_VXLAN_LINUX}" up
+ ip addr add "${SERVER_VXLAN_IP_LINUX}/${MASK_VXLAN_LINUX}" dev "${LINK_VXLAN_LINUX}"
+
+ # Get MTU of interface. VXLAN must use a smaller value due to overhead.
+ mtu="$(cat /sys/class/net/${NET_IF_DOCKER}/mtu)"
+
+ # Decrease VXLAN MTU. This should already be handled for us by iproute2, but
+ # just being cautious.
+ ip link set dev "${LINK_VXLAN_LINUX}" mtu "$((mtu - 50))"
+
+ # Bring-up VPP and create tap interfaces and VXLAN tunnel.
+ vpp \
+ unix '{' log /tmp/vpp1.log full-coredump cli-listen ${VPP_SOCK} '}' \
+ api-segment '{' prefix vpp1 '}' \
+ api-trace '{' on '}' \
+ dpdk '{' uio-driver uio_pci_generic no-pci '}'
+
+ # Wait for VPP to come up.
+ while ! ${VPPCTL} show log; do
+ sleep 1
+ done
+
+ # Bring up the memif interface and assign an IP to it.
+ ${VPPCTL} create interface memif id 0 master
+ sleep 1
+ ${VPPCTL} set int state memif0/0 up
+ ${VPPCTL} set int ip address memif0/0 "${SERVER_VPP_MEMIF_IP}/${VPP_MEMIF_NM}"
+
+ # Create VPP-controlled tap interface bridged to the memif.
+ ${VPPCTL} create tap id 0 host-if-name vpp-tap-0
+ sleep 1
+ ${VPPCTL} set interface state tap0 up
+ ip addr add "${SERVER_VPP_TAP_IP_MEMIF}/${VPP_TAP_NM}" dev vpp-tap-0
+ ${VPPCTL} set interface l2 bridge tap0 "${VPP_BRIDGE_DOMAIN_TAP}"
+ ${VPPCTL} set interface l2 bridge memif0/0 "${VPP_BRIDGE_DOMAIN_TAP}"
+}
+
+#------------------------------------------------------------------------------#
+# @brief: Used to shutdown/cleanup the server container.
+function context_destroy()
+{
+ # OS will reclaim interfaces and resources when container is terminated.
+ :
+}
+
+#------------------------------------------------------------------------------#
+# @brief: Server worker loop to keep the container alive. Just idles.
+function context_loop()
+{
+ # Sleep indefinitely (to keep container alive for testing).
+ tail -f /dev/null
+}
+
+#------------------------------------------------------------------------------#
+# @brief: Launches a minimalistic web server via netcat. The Dockerfile
+# associated with this project is configured to treat the web server
+# replying with "200 OK" as a sort of simple health probe.
+function health_check_init()
+{
+ while true; do
+ echo -e "HTTP/1.1 200 OK\n\nHOST:$(hostname)\nDATE:$(date)" \
+ | nc -l -p "${DOCKER_HEALTH_PROBE_PORT}" -q 1
+ done
+}
+
+#------------------------------------------------------------------------------#
+# @brief: Launches a minimalistic web server via netcat. This instance is
+# meant to bind to the Linux VXLAN tunnel we create.
+function web_server_vxlan_linux()
+{
+ while true; do
+ echo -e "HTTP/1.1 200 OK\n\nHOST:$(hostname)\nDATE:$(date)\nHello from the Linux interface." \
+ | nc -l -s "${SERVER_VXLAN_IP_LINUX}" -p 8000 -q 1
+ done
+}
+
+#------------------------------------------------------------------------------#
+# @brief: Launches a minimalistic web server via netcat. This instance is
+# meant to bind to the VPP VXLAN tunnel we create.
+function web_server_vpp_tap()
+{
+ while true; do
+ echo -e "HTTP/1.1 200 OK\n\nHOST:$(hostname)\nDATE:$(date)\nHello from the VPP interface." \
+ | nc -l -s "${SERVER_VPP_TAP_IP_MEMIF}" -p 8000 -q 1
+ done
+}
+
+#------------------------------------------------------------------------------#
+# @brief: Main/default entry point.
+function main()
+{
+ # Make sure we always cleanup.
+ trap context_destroy EXIT
+
+ # Bring up interfaces.
+ context_create
+
+ # Enable health check responder.
+ health_check_init &
+
+ # Bring up test web servers.
+ web_server_vxlan_linux &
+ web_server_vpp_tap &
+
+ # Enter our worker loop.
+ context_loop
+}
+
+#------------------------------------------------------------------------------#
+# Script is generally intended to be sourced and individual functions called.
+# If just run as a standalone script, assume it's being used as the entrypoint
+# for a Docker container.
+if [ "${BASH_SOURCE[0]}" -ef "$0" ]; then
+ # Being run. Launch main.
+ main "${@}"
+else
+ # Being sourced. Do nothing.
+ :
+fi
+
diff --git a/docs/usecases/vpp_testbench/src/vpp_testbench_helpers.sh b/docs/usecases/vpp_testbench/src/vpp_testbench_helpers.sh
new file mode 100755
index 00000000000..7dfb646a1db
--- /dev/null
+++ b/docs/usecases/vpp_testbench/src/vpp_testbench_helpers.sh
@@ -0,0 +1,273 @@
+#!/bin/bash
+################################################################################
+# @brief: Helper functions for the VPP testbench project.
+# NOTE: functions prefixed with "host_only" are functions
+# intended to be executed on the host OS, **outside** of the
+# Docker containers. These are typically functions for bring-up
+# (i.e. creating the Docker networks, launching/terminating the
+# Docker containers, etc.). If a function is not prefixed with
+# "host_only", assume that the function/value/etc. is intended
+# for use within the Docker containers. We could maybe re-factor
+# this in the future so "host_only" functions live in a separate
+# file.
+# @author: Matthew Giassa <mgiassa@cisco.com>
+# @copyright: (C) Cisco 2021.
+################################################################################
+
+# Meant to be sourced, not executed directly.
+if [ "${BASH_SOURCE[0]}" -ef "$0" ]; then
+ echo "This script is intended to be sourced, not run. Aborting."
+ false
+ exit
+fi
+
+#------------------------------------------------------------------------------#
+# For tests using the Linux kernel network stack.
+#------------------------------------------------------------------------------#
+# Health check probe port for all containers.
+export DOCKER_HEALTH_PROBE_PORT="8123"
+# Docker bridge network settings.
+export CLIENT_BRIDGE_IP_DOCKER="169.254.0.1"
+export SERVER_BRIDGE_IP_DOCKER="169.254.0.2"
+export BRIDGE_NET_DOCKER="169.254.0.0/24"
+export BRIDGE_GW_DOCKER="169.254.0.254"
+# Overlay IP addresses.
+export CLIENT_VXLAN_IP_LINUX="169.254.10.1"
+export SERVER_VXLAN_IP_LINUX="169.254.10.2"
+export MASK_VXLAN_LINUX="24"
+export VXLAN_ID_LINUX="42"
+# IANA (rather than Linux legacy port value).
+export VXLAN_PORT="4789"
+
+# Docker network we use to bridge containers.
+export DOCKER_NET="vpp-testbench-net"
+# Docker container names for client and server (runtime aliases).
+export DOCKER_CLIENT_HOST="vpp-testbench-client"
+export DOCKER_SERVER_HOST="vpp-testbench-server"
+# Some related variables have to be computed at the last second, so they
+# are not all defined up-front.
+export CLIENT_VPP_NETNS_DST="/var/run/netns/${DOCKER_CLIENT_HOST}"
+export SERVER_VPP_NETNS_DST="/var/run/netns/${DOCKER_SERVER_HOST}"
+
+# VPP options.
+# These can be arbitrarily named.
+export CLIENT_VPP_HOST_IF="vpp1"
+export SERVER_VPP_HOST_IF="vpp2"
+# Putting VPP interfaces on separate subnet from Linux-stack i/f.
+export CLIENT_VPP_MEMIF_IP="169.254.11.1"
+export SERVER_VPP_MEMIF_IP="169.254.11.2"
+export VPP_MEMIF_NM="24"
+export CLIENT_VPP_TAP_IP_MEMIF="169.254.12.1"
+export SERVER_VPP_TAP_IP_MEMIF="169.254.12.2"
+export VPP_TAP_NM="24"
+# Bridge domain ID (for VPP tap + VXLAN interfaces). Arbitrary.
+export VPP_BRIDGE_DOMAIN_TAP="1000"
+
+# VPP socket path. Make it one level "deeper" than the "/run/vpp" that is used
+# by default, so our containers don't accidentally connect to an instance of
+# VPP running on the host OS (i.e. "/run/vpp/vpp.sock"), and hang the system.
+export VPP_SOCK_PATH="/run/vpp/containers"
+
+#------------------------------------------------------------------------------#
+# @brief: Converts an integer value representation of a VXLAN ID to a
+# VXLAN IPv4 multicast address (string represenation). This
+# effectively sets the first octet to "239" and the remaining 3x
+# octets to the IP-address equivalent of a 24-bit value.
+# Assumes that it's never supplied an input greater than what a
+# 24-bit unsigned integer can hold.
+function vxlan_id_to_mc_ip()
+{
+ if [ $# -ne 1 ]; then
+ echo "Sanity failure."
+ false
+ exit
+ fi
+
+ local id="${1}"
+ local a b c d ret
+ a="239"
+ b="$(((id>>16) & 0xff))"
+ c="$(((id>>8) & 0xff))"
+ d="$(((id) & 0xff))"
+ ret="${a}.${b}.${c}.${d}"
+
+ echo "${ret}"
+ true
+}
+# Multicast address for VXLAN. Treat the lower three octets as the 24-bit
+# representation of the VXLAN ID for ease-of-use (use-case specific, not
+# necessarily an established rule/protocol).
+MC_VXLAN_ADDR_LINUX="$(vxlan_id_to_mc_ip ${VXLAN_ID_LINUX})"
+export MC_VXLAN_ADDR_LINUX
+
+#------------------------------------------------------------------------------#
+# @brief: Get'er function (so makefile can re-use common values from this
+# script, and propagate them down to the Docker build operations
+# and logic within the Dockerfile; "DRY").
+function host_only_get_docker_health_probe_port()
+{
+ echo "${DOCKER_HEALTH_PROBE_PORT}"
+}
+
+#------------------------------------------------------------------------------#
+# @brief: Creates the Docker bridge network used to connect the
+# client and server testbench containers.
+function host_only_create_docker_networks()
+{
+ # Create network (bridge for VXLAN). Don't touch 172.16/12 subnet, as
+ # Docker uses it by default for its own overlay functionality.
+ docker network create \
+ --driver bridge \
+ --subnet=${BRIDGE_NET_DOCKER} \
+ --gateway=${BRIDGE_GW_DOCKER} \
+ "${DOCKER_NET}"
+}
+
+#------------------------------------------------------------------------------#
+# @brief: Destroys the Docker bridge network for connecting the
+# containers.
+function host_only_destroy_docker_networks()
+{
+ docker network rm "${DOCKER_NET}" || true
+}
+
+#------------------------------------------------------------------------------#
+# @brief: Bringup/dependency helper for VPP.
+function host_only_create_vpp_deps()
+{
+ # Create area for VPP sockets and mount points, if it doesn't already
+ # exist. Our containers need access to this path so they can see each
+ # others' respective sockets so we can bind them together via memif.
+ sudo mkdir -p "${VPP_SOCK_PATH}"
+}
+
+#------------------------------------------------------------------------------#
+# @brief: Launches the testbench client container.
+function host_only_run_testbench_client_container()
+{
+ # Sanity check.
+ if [ $# -ne 1 ]; then
+ echo "Sanity failure."
+ false
+ exit
+ fi
+
+ # Launch container. Mount the local PWD into the container too (so we can
+ # backup results).
+ local image_name="${1}"
+ docker run -d --rm \
+ --cap-add=NET_ADMIN \
+ --cap-add=SYS_NICE \
+ --cap-add=SYS_PTRACE \
+ --device=/dev/net/tun:/dev/net/tun \
+ --device=/dev/vfio/vfio:/dev/vfio/vfio \
+ --device=/dev/vhost-net:/dev/vhost-net \
+ --name "${DOCKER_CLIENT_HOST}" \
+ --volume="$(pwd):/work:rw" \
+ --volume="${VPP_SOCK_PATH}:/run/vpp:rw" \
+ --network name="${DOCKER_NET},ip=${CLIENT_BRIDGE_IP_DOCKER}" \
+ --workdir=/work \
+ "${image_name}"
+}
+
+#------------------------------------------------------------------------------#
+# @brief: Launches the testbench server container.
+function host_only_run_testbench_server_container()
+{
+ # Sanity check.
+ if [ $# -ne 1 ]; then
+ echo "Sanity failure."
+ false
+ exit
+ fi
+
+ # Launch container. Mount the local PWD into the container too (so we can
+ # backup results).
+ local image_name="${1}"
+ docker run -d --rm \
+ --cap-add=NET_ADMIN \
+ --cap-add=SYS_NICE \
+ --cap-add=SYS_PTRACE \
+ --device=/dev/net/tun:/dev/net/tun \
+ --device=/dev/vfio/vfio:/dev/vfio/vfio \
+ --device=/dev/vhost-net:/dev/vhost-net \
+ --name "${DOCKER_SERVER_HOST}" \
+ --volume="${VPP_SOCK_PATH}:/run/vpp:rw" \
+ --network name="${DOCKER_NET},ip=${SERVER_BRIDGE_IP_DOCKER}" \
+ "${image_name}"
+}
+
+#------------------------------------------------------------------------------#
+# @brief: Terminates the testbench client container.
+function host_only_kill_testbench_client_container()
+{
+ docker kill "${DOCKER_CLIENT_HOST}" || true
+ docker rm "${DOCKER_CLIENT_HOST}" || true
+}
+
+#------------------------------------------------------------------------------#
+# @brief: Terminates the testbench server container.
+function host_only_kill_testbench_server_container()
+{
+ docker kill "${DOCKER_SERVER_HOST}" || true
+ docker rm "${DOCKER_SERVER_HOST}" || true
+}
+
+#------------------------------------------------------------------------------#
+# @brief: Launches an interactive shell in the client container.
+function host_only_shell_client_container()
+{
+ docker exec -it "${DOCKER_CLIENT_HOST}" bash --init-file /entrypoint.sh
+}
+
+#------------------------------------------------------------------------------#
+# @brief: Launches an interactive shell in the server container.
+function host_only_shell_server_container()
+{
+ docker exec -it "${DOCKER_SERVER_HOST}" bash --init-file /entrypoint.sh
+}
+
+#------------------------------------------------------------------------------#
+# @brief: Determines the network namespace or "netns" associated with a
+# running Docker container, and then creates a network interface
+# in the default/host netns, and moves it into the netns
+# associated with the container.
+function host_only_move_host_interfaces_into_container()
+{
+ # NOTE: this is only necessary if we want to create Linux network
+ # interfaces while working in the default namespace, and then move them
+ # into container network namespaces.
+ # In earlier versions of this code, we did such an operation, but now we
+ # just create the interfaces inside the containers themselves (requires
+ # CAP_NET_ADMIN, or privileged containers, which we avoid). This is left
+ # here as it's occasionally useful for debug purposes (or might become a
+ # mini-lab itself).
+
+ # Make sure netns path exists.
+ sudo mkdir -p /var/run/netns
+
+ # Mount container network namespaces so that they are accessible via "ip
+ # netns". Ignore "START_OF_SCRIPT": just used to make
+ # linter-compliant text indentation look nicer.
+ DOCKER_CLIENT_PID=$(docker inspect -f '{{.State.Pid}}' ${DOCKER_CLIENT_HOST})
+ DOCKER_SERVER_PID=$(docker inspect -f '{{.State.Pid}}' ${DOCKER_SERVER_HOST})
+ CLIENT_VPP_NETNS_SRC=/proc/${DOCKER_CLIENT_PID}/ns/net
+ SERVER_VPP_NETNS_SRC=/proc/${DOCKER_SERVER_PID}/ns/net
+ sudo ln -sfT "${CLIENT_VPP_NETNS_SRC}" "${CLIENT_VPP_NETNS_DST}"
+ sudo ln -sfT "${SERVER_VPP_NETNS_SRC}" "${SERVER_VPP_NETNS_DST}"
+
+ # Move these interfaces into the namespaces of the containers and assign an
+ # IPv4 address to them.
+ sudo ip link set dev "${CLIENT_VPP_HOST_IF}" netns "${DOCKER_CLIENT_NETNS}"
+ sudo ip link set dev "${SERVER_VPP_HOST_IF}" netns "${DOCKER_SERVER_NETNS}"
+ docker exec ${DOCKER_CLIENT_HOST} ip a
+ docker exec ${DOCKER_SERVER_HOST} ip a
+
+ # Bring up the links and assign IP addresses. This must be done
+ # **after** moving the interfaces to a new netns, as we might have a
+ # hypothetical use case where we assign the same IP to multiple
+ # interfaces, which would be a problem. This collision issue isn't a
+ # problem though if the interfaces are in separate network namespaces
+ # though.
+}
+