misc: deprecate netmap and ixge drivers

Both are out of sync for long time...

Type: refactor

Change-Id: I7de3170d35330fc172501d87655dfef91998b8fe
Signed-off-by: Damjan Marion <damarion@cisco.com>

1 files changed, 236 insertions, 0 deletions

diff --git a/extras/deprecated/netmap/cli.c b/extras/deprecated/netmap/cli.c
new file mode 100644
index 00000000000..713632947a1
--- /dev/null
+++ b/extras/deprecated/netmap/cli.c
@@ -0,0 +1,236 @@
+/*
+ *------------------------------------------------------------------
+ * Copyright (c) 2016 Cisco and/or its affiliates.
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *------------------------------------------------------------------
+ */
+#include <stdint.h>
+#include <net/if.h>
+#include <sys/ioctl.h>
+
+#include <vlib/vlib.h>
+#include <vlib/unix/unix.h>
+#include <vnet/ethernet/ethernet.h>
+
+#include <vnet/devices/netmap/net_netmap.h>
+#include <vnet/devices/netmap/netmap.h>
+
+static clib_error_t *
+netmap_create_command_fn (vlib_main_t * vm, unformat_input_t * input,
+			  vlib_cli_command_t * cmd)
+{
+  unformat_input_t _line_input, *line_input = &_line_input;
+  u8 *host_if_name = NULL;
+  u8 hwaddr[6];
+  u8 *hw_addr_ptr = 0;
+  int r;
+  u8 is_pipe = 0;
+  u8 is_master = 0;
+  u32 sw_if_index = ~0;
+  clib_error_t *error = NULL;
+
+  /* Get a line of input. */
+  if (!unformat_user (input, unformat_line_input, line_input))
+    return 0;
+
+  while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
+    {
+      if (unformat (line_input, "name %s", &host_if_name))
+	;
+      else
+	if (unformat
+	    (line_input, "hw-addr %U", unformat_ethernet_address, hwaddr))
+	hw_addr_ptr = hwaddr;
+      else if (unformat (line_input, "pipe"))
+	is_pipe = 1;
+      else if (unformat (line_input, "master"))
+	is_master = 1;
+      else if (unformat (line_input, "slave"))
+	is_master = 0;
+      else
+	{
+	  error = clib_error_return (0, "unknown input `%U'",
+				     format_unformat_error, line_input);
+	  goto done;
+	}
+    }
+
+  if (host_if_name == NULL)
+    {
+      error = clib_error_return (0, "missing host interface name");
+      goto done;
+    }
+
+  r =
+    netmap_create_if (vm, host_if_name, hw_addr_ptr, is_pipe, is_master,
+		      &sw_if_index);
+
+  if (r == VNET_API_ERROR_SYSCALL_ERROR_1)
+    {
+      error = clib_error_return (0, "%s (errno %d)", strerror (errno), errno);
+      goto done;
+    }
+
+  if (r == VNET_API_ERROR_INVALID_INTERFACE)
+    {
+      error = clib_error_return (0, "Invalid interface name");
+      goto done;
+    }
+
+  if (r == VNET_API_ERROR_SUBIF_ALREADY_EXISTS)
+    {
+      error = clib_error_return (0, "Interface already exists");
+      goto done;
+    }
+
+  vlib_cli_output (vm, "%U\n", format_vnet_sw_if_index_name, vnet_get_main (),
+		   sw_if_index);
+
+done:
+  unformat_free (line_input);
+
+  return error;
+}
+
+/*?
+ * '<em>netmap</em>' is a framework for very fast packet I/O from userspace.
+ * '<em>VALE</em>' is an equally fast in-kernel software switch using the
+ * netmap API. '<em>netmap</em>' includes '<em>netmap pipes</em>', a shared
+ * memory packet transport channel. Together, they provide a high speed
+ * user-space interface that allows VPP to patch into a linux namespace, a
+ * linux container, or a physical NIC without the use of DPDK. Netmap/VALE
+ * generates the '<em>netmap.ko</em>' kernel module that needs to be loaded
+ * before netmap interfaces can be created.
+ * - https://github.com/luigirizzo/netmap - Netmap/VALE repo.
+ * - https://github.com/vpp-dev/netmap - VPP development package for Netmap/VALE,
+ * which is a snapshot of the Netmap/VALE repo with minor changes to work
+ * with containers and modified kernel drivers to work with NICs.
+ *
+ * Create a netmap interface that will attach to a linux interface.
+ * The interface must already exist. Once created, a new netmap interface
+ * will exist in VPP with the name '<em>netmap-<ifname></em>', where
+ * '<em><ifname></em>' takes one of two forms:
+ * - <b>ifname</b> - Linux interface to bind too.
+ * - <b>valeXXX:YYY</b> -
+ *   - Where '<em>valeXXX</em>' is an arbitrary name for a VALE
+ *     interface that must start with '<em>vale</em>' and is less
+ *     than 16 characters.
+ *   - Where '<em>YYY</em>' is an existing linux namespace.
+ *
+ * This command has the following optional parameters:
+ *
+ * - <b>hw-addr <mac-addr></b> - Optional ethernet address, can be in either
+ * X:X:X:X:X:X unix or X.X.X cisco format.
+ *
+ * - <b>pipe</b> - Optional flag to indicate that a '<em>netmap pipe</em>'
+ * instance should be created.
+ *
+ * - <b>master | slave</b> - Optional flag to indicate whether VPP should
+ * be the master or slave of the '<em>netmap pipe</em>'. Only considered
+ * if '<em>pipe</em>' is entered. Defaults to '<em>slave</em>' if not entered.
+ *
+ * @cliexpar
+ * Example of how to create a netmap interface tied to the linux
+ * namespace '<em>vpp1</em>':
+ * @cliexstart{create netmap name vale00:vpp1 hw-addr 02:FE:3F:34:15:9B pipe master}
+ * netmap-vale00:vpp1
+ * @cliexend
+ * Once the netmap interface is created, enable the interface using:
+ * @cliexcmd{set interface state netmap-vale00:vpp1 up}
+?*/
+/* *INDENT-OFF* */
+VLIB_CLI_COMMAND (netmap_create_command, static) = {
+  .path = "create netmap",
+  .short_help = "create netmap name <ifname>|valeXXX:YYY "
+    "[hw-addr <mac-addr>] [pipe] [master|slave]",
+  .function = netmap_create_command_fn,
+};
+/* *INDENT-ON* */
+
+static clib_error_t *
+netmap_delete_command_fn (vlib_main_t * vm, unformat_input_t * input,
+			  vlib_cli_command_t * cmd)
+{
+  unformat_input_t _line_input, *line_input = &_line_input;
+  u8 *host_if_name = NULL;
+  clib_error_t *error = NULL;
+
+  /* Get a line of input. */
+  if (!unformat_user (input, unformat_line_input, line_input))
+    return 0;
+
+  while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
+    {
+      if (unformat (line_input, "name %s", &host_if_name))
+	;
+      else
+	{
+	  error = clib_error_return (0, "unknown input `%U'",
+				     format_unformat_error, line_input);
+	  goto done;
+	}
+    }
+
+  if (host_if_name == NULL)
+    {
+      error = clib_error_return (0, "missing host interface name");
+      goto done;
+    }
+
+  netmap_delete_if (vm, host_if_name);
+
+done:
+  unformat_free (line_input);
+
+  return error;
+}
+
+/*?
+ * Delete a netmap interface. Use the '<em><ifname></em>' to identify
+ * the netmap interface to be deleted. In VPP, netmap interfaces are
+ * named as '<em>netmap-<ifname></em>', where '<em><ifname></em>'
+ * takes one of two forms:
+ * - <b>ifname</b> - Linux interface to bind too.
+ * - <b>valeXXX:YYY</b> -
+ *   - Where '<em>valeXXX</em>' is an arbitrary name for a VALE
+ *     interface that must start with '<em>vale</em>' and is less
+ *     than 16 characters.
+ *   - Where '<em>YYY</em>' is an existing linux namespace.
+ *
+ * @cliexpar
+ * Example of how to delete a netmap interface named '<em>netmap-vale00:vpp1</em>':
+ * @cliexcmd{delete netmap name vale00:vpp1}
+?*/
+/* *INDENT-OFF* */
+VLIB_CLI_COMMAND (netmap_delete_command, static) = {
+  .path = "delete netmap",
+  .short_help = "delete netmap name <ifname>|valeXXX:YYY",
+  .function = netmap_delete_command_fn,
+};
+/* *INDENT-ON* */
+
+clib_error_t *
+netmap_cli_init (vlib_main_t * vm)
+{
+  return 0;
+}
+
+VLIB_INIT_FUNCTION (netmap_cli_init);
+
+/*
+ * fd.io coding-style-patch-verification: ON
+ *
+ * Local Variables:
+ * eval: (c-set-style "gnu")
+ * End:
+ */