Add structure to some of the documentation; VPP-223

Moves the random .md files, when rendered by Doxygen,
into a config examples tree. We may later flesh this
out into a more complete user documentation section.

Change-Id: If423b82f1047f1c84f90876a786313054b5f7c77
Signed-off-by: Chris Luke <chrisy@flirble.org>

1 files changed, 0 insertions, 465 deletions

diff --git a/plugins/ioam-plugin/ioam/Readme.md b/plugins/ioam-plugin/ioam/Readme.md
deleted file mode 100644
index 469a15a142d..00000000000
--- a/plugins/ioam-plugin/ioam/Readme.md
+++ /dev/null
@@ -1,465 +0,0 @@
-
-## VPP Inband OAM (iOAM)
-
-In-band OAM (iOAM) is an implementation study to record operational
-information in the packet while the packet traverses a path between
-two points in the network.
-
-Overview of iOAM can be found in [iOAM-Devnet] page.
-The following IETF drafts detail the motivation and mechanism for
-recording operational information:
- - [iOAM-ietf-requirements] - Describes motivation and usecases for iOAM
- - [iOAM-ietf-data] - Describes data records that can be collected using iOAM
- - [iOAM-ietf-transport] - Lists out the transport protocols
- and mechanism to carry iOAM data records
- - [iOAM-ietf-proof-of-transit] - Describes the idea of Proof of Transit (POT)
- and mechanisms to operationalize the idea
-
-## Terminology
-In-band OAM is expected to be deployed in a specific domain rather
-than on the overall Internet. The part of the network which employs in-band OAM
-is referred to as **"in-band OAM-domain"**.
-
-In-band OAM data is added to a packet on entering the in-band OAM-domain
-and is removed from the packet when exiting the domain.
-Within the in-band OAM-domain, network nodes that the packet traverses
-may update the in-band OAM data records.
-
-- The node which adds in-band OAM data to the packet is called the
-**"in-band OAM encapsulating node"**.
-
-- The node which removes the in-band OAM data is referred to as the
-**"in-band OAM decapsulating node"**.
-
-- Nodes within the domain which are aware of in-band OAM data and read
-and/or write or process the in-band OAM data are called
-**"in-band OAM transit nodes"**.
-
-## Features supported in the current release
-VPP can function as in-band OAM encapsulating, transit and decapsulating node.
-In this version of VPP in-band OAM data is transported as options in an
-IPv6 hop-by-hop extension header. Hence in-band OAM can be enabled
-for IPv6 traffic.
-
-The following iOAM features are supported:
-
-- **In-band OAM Tracing** : In-band OAM supports multiple data records to be
-recorded in the packet as the packet traverses the network.
-These data records offer insights into the operational behavior of the network.
-The following information can be collected in the tracing
-data from the nodes a packet traverses:
-  - Node ID
-  - Ingress interface ID
-  - Egress interface ID
-  - Timestamp
-  - Pre-configured application data
-
-- **In-band OAM Proof of Transit (POT)**: Proof of transit iOAM data is
-added to every packet for verifying that a packet traverses a specific
-set of nodes.
-In-band OAM data is updated at every node that is enabled with iOAM
-proof of transit and is used to verify whether a packet traversed
-all the specified nodes. When the verifier receives each packet,
-it can validate whether the packet traversed the specified nodes.
-
-
-## Configuration
-Configuring iOAM involves:
-- Selecting the packets for which iOAM data must be inserted, updated or removed
-  - Selection of packets for iOAM data insertion on iOAM encapsulating node.
-  Selection of packets is done by 5-tuple based classification
-  - Selection of packets for updating iOAM data is implicitly done on the
-  presence of iOAM options in the packet
-  - Selection of packets for removing the iOAM data is done on 5-tuple
-  based classification
-- The kind of data to be collected
-  - Tracing data
-  - Proof of transit
-- Additional details for processing iOAM data to be collected
-  - For trace data - trace type, number of nodes to be recorded in the trace,
-  time stamp precision, etc.
-  - For POT data - configuration of POT profile required to process the POT data
-
-The CLI for configuring iOAM is explained here followed by detailed steps
-and examples to deploy iOAM on VPP as an encapsulating, transit or
-decapsulating iOAM node in the subsequent sub-sections.
-
-VPP iOAM configuration for enabling trace and POT is as follows:
-
-    set ioam rewrite trace-type <0x1f|0x7|0x9|0x11|0x19>
-    trace-elts <number of trace elements> trace-tsp <0|1|2|3>
-    node-id <node ID in hex> app-data <application data in hex> [pot]
-
-A description of each of the options of the CLI follows:
-- trace-type : An entry in the "Node data List" array of the trace option
-can have different formats, following the needs of the a deployment.
-For example: Some deployments might only be interested
-in recording the node identifiers, whereas others might be interested
-in recording node identifier and timestamp.
-The following types are currently supported:
-    - 0x1f : Node data to include hop limit (8 bits), node ID (24 bits),
-    ingress and egress interface IDs (16 bits each), timestamp (32 bits),
-    application data (32 bits)
-    - 0x7 : Node data to include hop limit (8 bits), node ID (24 bits),
-    ingress and egress interface IDs (16 bits each)
-    - 0x9 : Node data to include hop limit (8 bits), node ID (24 bits),
-    timestamp (32 bits)
-    - 0x11: Node data to include hop limit (8 bits), node ID (24 bits),
-    application data (32 bits)
-    - 0x19: Node data to include hop limit (8 bits), node ID (24 bits),
-    timestamp (32 bits), application data (32 bits)
-- trace-elts : Defines the length of the node data array in the trace option.
-- trace-tsp : Defines the timestamp precision to use with the enumerated value
-              for precision as follows:
-    - 0 : 32bits timestamp in seconds
-    - 1 : 32bits timestamp in milliseconds
-    - 2 : 32bits timestamp in microseconds
-    - 3 : 32bits timestamp in nanoseconds
-- node-id : Unique identifier for the node, included in the node ID
-  field of the node data in trace option.
-- app-data : The value configured here is included as is in
-application data field of node data in trace option.
-- pot : Enables POT option to be included in the iOAM options.
-
-### Trace configuration
-
-#### On in-band OAM encapsulating node
- - **Configure classifier and apply ACL** to select packets for
- iOAM data insertion
-    - Example to enable iOAM data insertion for all the packets
-    towards IPv6 address db06::06:
-
-    vpp# classify table miss-next node ip6-lookup mask l3 ip6 dst
-    
-    vpp# classify session acl-hit-next node ip6-add-hop-by-hop
-    table-index 0 match l3 ip6 dst db06::06
-    
-    vpp# set int input acl intfc GigabitEthernet0/0/0 ip6-table 0
-    
- - **Enable tracing** : Specify node ID, maximum number of nodes for which
- trace data should be recorded, type of data to be included for recording,
- optionally application data to be included
-    - Example to enable tracing with a maximum of 4 nodes recorded
-    and the data to be recorded to include - hop limit, node id,
-    ingress and egress interface IDs, timestamp (millisecond precision),
-    application data (0x1234):
-
-
-    vpp# set ioam rewrite trace-type 0x1f trace-elts 4 trace-tsp 1
-    node-id 0x1 app-data 0x1234
-
-
-
-#### On in-band OAM transit node
-- The transit node requires trace type, timestamp precision, node ID and
-optionally application data to be configured,
-to update its node data in the trace option.
-
-Example:  
-
-    vpp# set ioam rewrite trace-type 0x1f trace-elts 4 trace-tsp 1  
-    node-id 0x2 app-data 0x1234  
-
-#### On the In-band OAM decapsulating node
-- The decapsulating node similar to encapsulating node requires
-**classification** of the packets to remove iOAM data from.
-    - Example to decapsulate iOAM data for packets towards
-    db06::06, configure classifier and enable it as an ACL as follows:
-
-
-    vpp# classify table miss-next node ip6-lookup mask l3 ip6 dst
-
-    vpp# classify session acl-hit-next node ip6-lookup table-index 0
-    match l3 ip6 dst db06::06 opaque-index 100
-
-    vpp# set int input acl intfc GigabitEthernet0/0/0 ip6-table 0
-
-
-- Decapsulating node requires trace type, timestamp precision,
-node ID and optionally application data to be configured,
-to update its node data in the trace option before it is decapsulated.
-
-Example:  
-
-    vpp# set ioam rewrite trace-type 0x1f trace-elts 4  
-    trace-tsp 1 node-id 0x3 app-data 0x1234  
-
-
-### Proof of Transit configuration
-
-For details on proof-of-transit,
-see the IETF draft [iOAM-ietf-proof-of-transit].
-To enable Proof of Transit all the nodes that participate
-and hence are verified for transit need a proof of transit profile.
-A script to generate a proof of transit profile as per the mechanism
-described in [iOAM-ietf-proof-of-transit] will be available at [iOAM-Devnet].
-
-The Proof of transit mechanism implemented here is based on
-Shamir's Secret Sharing algorithm.
-The overall algorithm uses two polynomials 
-POLY-1 and POLY-2. The degree of polynomials depends on number of nodes
-to be verified for transit.
-POLY-1 is secret and constant. Each node gets a point on POLY-1
-at setup-time and keeps it secret.
-POLY-2 is public, random and per packet.
-Each node is assigned a point on POLY-1 and POLY-2 with the same x index.
-Each node derives its point on POLY-2 each time a packet arrives at it.
-A node then contributes its points on POLY-1 and POLY-2 to construct
-POLY-3 (POLY-3 = POLY-1 + POLY-2) using lagrange extrapolation and
-forwards it towards the verifier by updating POT data in the packet.
-The verifier constructs POLY-3 from the accumulated value from all the nodes
-and its own points on POLY-1 and POLY-2 and verifies whether
-POLY-3 = POLY-1 + POLY-2.  Only the verifier knows POLY-1.
-The solution leverages finite field arithmetic in a field of size "prime number"
-for reasons explained in description of Shamir's secret sharing algorithm.
-
-Here is an explanation of POT profile list and profile configuration CLI to
-realize the above mechanism.
-It is best to use the script provided at [iOAM-Devnet] to generate
-this configuration.
-- **Create POT profile** : set pot profile name <string> id [0-1]  
-[validator-key 0xu64] prime-number 0xu64 secret_share 0xu64  
-lpc 0xu64 polynomial2 0xu64 bits-in-random [0-64]  
-    - name : Profile list name.
-    - id : Profile id, it can be 0 or 1.
-    A maximum of two profiles can be configured per profile list.
-    - validator-key : Secret key configured only on the
-    verifier/decapsulating node used to compare and verify proof of transit.
-    - prime-number : Prime number for finite field arithmetic as required by the
-    proof of transit mechanism.
-    - secret_share : Unique point for each node on the secret polynomial POLY-1.
-    - lpc : Lagrange Polynomial Constant(LPC) calculated per node based on
-    its point (x value used for evaluating the points on the polynomial)
-    on the polynomial used in lagrange extrapolation
-    for reconstructing polynomial (POLY-3).
-    - polynomial2 : Is the pre-evaluated value of the point on
-    2nd polynomial(POLY-2). This is unique for each node.
-    It is pre-evaluated for all the coefficients of POLY-2 except
-    for the constant part of the polynomial that changes per packet
-    and is received as part of the POT data in the packet.
-    - bits-in-random : To control the size of the random number to be
-    generated. This number has to match the other numbers generated and used
-    in the profile as per the algorithm.
-
-- **Set a configured profile as active/in-use** :  
-set pot profile-active name <string> ID [0-1]  
-    - name : Name of the profile list to be used for computing
-    POT data per packet.
-    - ID : Identifier of the profile within the list to be used.
-
-#### On In-band OAM encapsulating node
- - Configure the classifier and apply ACL to select packets for iOAM data insertion.
-    - Example to enable iOAM data insertion for all the packet towards
-    IPv6 address db06::06 -
-
-
-    vpp# classify table miss-next node ip6-lookup mask l3 ip6 dst
-
-    vpp# classify session acl-hit-next node
-    ip6-add-hop-by-hop table-index 0 match l3 ip6 dst db06::06
-
-    vpp# set int input acl intfc GigabitEthernet0/0/0 ip6-table 0
-
-
- - Configure the proof of transit profile list with profiles.
-Each profile list referred to by a name can contain 2 profiles,
-only one is in use for updating proof of transit data at any time.
-    - Example profile list example with a profile generated from the
-    script to verify transit through 3 nodes is:
-
-
-    vpp# set pot profile name example id 0 prime-number 0x7fff0000fa884685
-    secret_share 0x6c22eff0f45ec56d lpc 0x7fff0000fa884682
-    polynomial2 0xffb543d4a9c bits-in-random 63
-
- - Enable one of the profiles from the configured profile list as active
- so that is will be used for calculating proof of transit
-
-Example enable profile ID 0 from profile list example configured above:
-
-
-    vpp# set pot profile-active name example ID 0
-
-
- - Enable POT option to be inserted
-
-
-    vpp# set ioam rewrite pot
-
-
-#### On in-band OAM transit node
- - Configure the proof of transit profile list with profiles for transit node.
-Example:
-
-
-    vpp# set pot profile name example id 0 prime-number 0x7fff0000fa884685
-    secret_share 0x564cdbdec4eb625d lpc 0x1
-    polynomial2 0x23f3a227186a bits-in-random 63
-
-#### On in-band OAM decapsulating node / verifier
-- The decapsulating node, similar to the encapsulating node requires
-classification of the packets to remove iOAM data from.
-    - Example to decapsulate iOAM data for packets towards db06::06
-    configure classifier and enable it as an ACL as follows:
-
-
-    vpp# classify table miss-next node ip6-lookup mask l3 ip6 dst
-
-    vpp# classify session acl-hit-next node ip6-lookup table-index 0
-    match l3 ip6 dst db06::06 opaque-index 100
-
-    vpp# set int input acl intfc GigabitEthernet0/0/0 ip6-table 0
-
-- To update and verify the proof of transit, POT profile list should be configured.
-    - Example POT profile list configured as follows:
-
-    vpp# set pot profile name example id 0 validate-key 0x7fff0000fa88465d
-    prime-number 0x7fff0000fa884685 secret_share 0x7a08fbfc5b93116d lpc 0x3
-    polynomial2 0x3ff738597ce bits-in-random 63
-
-## Operational data
-
-Following CLIs are available to check iOAM operation:
-- To check iOAM configuration that are effective use "show ioam summary"  
-
-Example:
-
-    vpp# show ioam summary  
-                  REWRITE FLOW CONFIGS - Not configured  
-     HOP BY HOP OPTIONS - TRACE CONFIG -  
-                            Trace Type : 0x1f (31)  
-             Trace timestamp precision : 1 (Milliseconds)  
-                    Num of trace nodes : 4  
-                               Node-id : 0x2 (2)  
-                              App Data : 0x1234 (4660)  
-                            POT OPTION - 1 (Enabled)  
-    Try 'show ioam pot and show pot profile' for more information  
-
-- To find statistics about packets for which iOAM options were
-added (encapsulating node) and removed (decapsulating node) execute
-*show errors*
-
-Example on encapsulating node:
-
-
-    vpp# show error
-       Count                    Node                  Reason
-    1208804706                ip6-inacl               input ACL hits
-    1208804706           ip6-add-hop-by-hop           Pkts w/ added ip6 hop-by-hop options
-    
-Example on decapsulating node:
-
-    vpp# show error
-       Count                    Node                  Reason
-      69508569                ip6-inacl               input ACL hits
-      69508569           ip6-pop-hop-by-hop           Pkts w/ removed ip6 hop-by-hop options
-
-- To check the POT profiles use "show pot profile"
-
-Example:
-
-    vpp# show pot profile
-    Profile list in use  : example
-    POT Profile at index: 0
-                     ID : 0
-              Validator : False (0)
-           Secret share : 0x564cdbdec4eb625d (6218586935324795485)
-           Prime number : 0x7fff0000fa884685 (9223090566081300101)
-    2nd polynomial(eval) : 0x23f3a227186a (39529304496234)
-                     LPC : 0x1 (1)
-               Bit mask : 0x7fffffffffffffff (9223372036854775807)
-    Profile index in use: 0
-    Pkts passed : 0x36 (54)
-
-- To get statistics  of POT for packets use "show ioam pot"
-
-Example at encapsulating or transit node:
-
-    vpp# show ioam pot
-     Pkts with ip6 hop-by-hop POT options - 54
-     Pkts with ip6 hop-by-hop POT options but no profile set - 0
-     Pkts with POT in Policy - 0
-     Pkts with POT out of Policy - 0
-    
-
-Example at decapsulating/verification node:
-
-
-    vpp# show ioam pot
-     Pkts with ip6 hop-by-hop POT options - 54
-     Pkts with ip6 hop-by-hop POT options but no profile set - 0
-     Pkts with POT in Policy - 54
-     Pkts with POT out of Policy - 0
-    
-- Tracing - enable trace of IPv6 packets to view the data inserted and
-collected.
-
-Example when the nodes are receiving data over a DPDK interface:
-Enable tracing using "trace add dpdk-input 20" and
-execute "show trace" to view the iOAM data collected:
-
-  
-    vpp# trace add dpdk-input 20  
-      
-    vpp# show trace
-    
-    ------------------- Start of thread 0 vpp_main -------------------  
-    
-    Packet 1  
-      
-    00:00:19:294697: dpdk-input  
-      GigabitEthernetb/0/0 rx queue 0  
-      buffer 0x10e6b: current data 0, length 214, free-list 0, totlen-nifb 0, trace 0x0  
-      PKT MBUF: port 0, nb_segs 1, pkt_len 214  
-        buf_len 2176, data_len 214, ol_flags 0x0, data_off 128, phys_addr 0xe9a35a00  
-        packet_type 0x0  
-      IP6: 00:50:56:9c:df:72 -> 00:50:56:9c:be:55  
-      IP6_HOP_BY_HOP_OPTIONS: db05::2 -> db06::6  
-        tos 0x00, flow label 0x0, hop limit 63, payload length 160  
-    00:00:19:294737: ethernet-input  
-      IP6: 00:50:56:9c:df:72 -> 00:50:56:9c:be:55  
-    00:00:19:294753: ip6-input  
-      IP6_HOP_BY_HOP_OPTIONS: db05::2 -> db06::6  
-        tos 0x00, flow label 0x0, hop limit 63, payload length 160  
-    00:00:19:294757: ip6-lookup  
-      fib 0 adj-idx 15 : indirect via db05::2 flow hash: 0x00000000  
-      IP6_HOP_BY_HOP_OPTIONS: db05::2 -> db06::6  
-        tos 0x00, flow label 0x0, hop limit 63, payload length 160  
-    00:00:19:294802: ip6-hop-by-hop  
-      IP6_HOP_BY_HOP: next index 5 len 96 traced 96  Trace Type 0x1f , 1 elts left  
-        [0] ttl 0x0 node ID 0x0 ingress 0x0 egress 0x0 ts 0x0  
-    app 0x0  
-        [1] ttl 0x3e node ID 0x3 ingress 0x1 egress 0x2 ts 0xb68c2213  
-    app 0x1234  
-        [2] ttl 0x3f node ID 0x2 ingress 0x1 egress 0x2 ts 0xb68c2204  
-    app 0x1234  
-        [3] ttl 0x40 node ID 0x1 ingress 0x5 egress 0x6 ts 0xb68c2200  
-    app 0x1234  
-        POT opt present  
-             random = 0x577a916946071950, Cumulative = 0x10b46e78a35a392d, Index = 0x0  
-    00:00:19:294810: ip6-rewrite  
-      tx_sw_if_index 1 adj-idx 14 : GigabitEthernetb/0/0  
-                                    IP6: 00:50:56:9c:be:55 -> 00:50:56:9c:df:72 flow hash: 0x00000000  
-      IP6: 00:50:56:9c:be:55 -> 00:50:56:9c:df:72  
-      IP6_HOP_BY_HOP_OPTIONS: db05::2 -> db06::6  
-        tos 0x00, flow label 0x0, hop limit 62, payload length 160  
-    00:00:19:294814: GigabitEthernetb/0/0-output  
-      GigabitEthernetb/0/0  
-      IP6: 00:50:56:9c:be:55 -> 00:50:56:9c:df:72  
-      IP6_HOP_BY_HOP_OPTIONS: db05::2 -> db06::6  
-        tos 0x00, flow label 0x0, hop limit 62, payload length 160  
-    00:00:19:294820: GigabitEthernetb/0/0-tx    
-      GigabitEthernetb/0/0 tx queue 0    
-      buffer 0x10e6b: current data 0, length 214, free-list 0, totlen-nifb 0, trace 0x0    
-      IP6: 00:50:56:9c:be:55 -> 00:50:56:9c:df:72
-      
-      IP6_HOP_BY_HOP_OPTIONS: db05::2 -> db06::6
-      
-        tos 0x00, flow label 0x0, hop limit 62, payload length 160  
-    
-
-[iOAM-Devnet]: <https://github.com/ciscodevnet/iOAM>
-[iOAM-ietf-requirements]:<https://tools.ietf.org/html/draft-brockners-inband-oam-requirements-01>
-[iOAM-ietf-transport]:<https://tools.ietf.org/html/draft-brockners-inband-oam-transport-01>
-[iOAM-ietf-data]:<https://tools.ietf.org/html/draft-brockners-inband-oam-data-01>
-[iOAM-ietf-proof-of-transit]:<https://tools.ietf.org/html/draft-brockners-proof-of-transit-01>