diff options
| author |   Damjan Marion <damarion@cisco.com> | 2017-01-10 17:07:38 +0100 |
|---|---|---|
| committer |   Dave Barach <openvpp@barachs.net> | 2017-01-11 12:57:31 +0000 |
| commit | 1c5ee872b14c5e9412b8c0e4f169b85d11238d14 (patch) | |
| tree | 14afec369eeabaef32aabd38c667275effdba341 /plugins/vcgn-plugin/vcgn/README | |
| parent | e546d3b0f739d35ec2e4702181d99ff4190e8b46 (diff) | |
Remove vcgn plugin
Change-Id: I79f18ec386dedd91a8dcea2ca5726208b7b3c67c
Signed-off-by: Damjan Marion <damarion@cisco.com>
Diffstat (limited to 'plugins/vcgn-plugin/vcgn/README')
| -rw-r--r-- | plugins/vcgn-plugin/vcgn/README | 100 |
1 files changed, 0 insertions, 100 deletions
diff --git a/plugins/vcgn-plugin/vcgn/README b/plugins/vcgn-plugin/vcgn/README deleted file mode 100644 index 9b903967ac4..00000000000 --- a/plugins/vcgn-plugin/vcgn/README +++ /dev/null @@ -1,100 +0,0 @@ - ================================= - CARRIER GRADE NAT - NAT44 README - ================================= - -What is implemented: -==================== -* NAT44 UDP, TCP, ICMP protocols -* Show and config commands for various parameters for the same -* NF9 logging is implemented but is not tested - -What is not implemented: -========================= -* TCP MSS -* TCP refresh direction -* Static port forwarding -* Syslog support -* Destination based logging or session logging -* None of the ALGs -* Performance optimization -* Binary APIs, suitable for configuring the feature from netconf/restconf/yang -* Support for VLANs - -Setup -===== - - +--------------+ -+------------+ GEb/0/0 | | -| Tester +-------------->+ vCGN/vPE-f | -| +<--------------+ VM in UCS | -+------------+ GE13/0/0 | | - +--------------+ - -Configure Interfaces and add routes in vPE-f -============================================= -set int ip address GigabitEthernetb/0/0 10.4.5.2/24 -set int state GigabitEthernetb/0/0 up -set int ip address GigabitEthernet13/0/0 20.4.5.2/24 -set int state GigabitEthernet13/0/0 up -ip route add 4.4.4.0/24 via GigabitEthernet13/0/0 -ip route add 1.2.3.0/24 via GigabitEthernetb/0/0 show ip fib - -Configure vCGN NAT44 for UDP/TCP/ICMP -======================================= -set vcgn inside GigabitEthernetb/0/0 outside GigabitEthernet13/0/0 -set vcgn port limit 65535 set vcgn dynamic port start 5641 -set vcgn map 10.1.1.0 - 10.1.1.31 set vcgn tcp timeout active 65535 init 65535 -set vcgn udp timeout active 65535 init 65535 set vcgn icmp timeout 65535 - -Set ARP entries for CGN to Tester -================================== -set ip arp GigabitEthernet13/0/0 4.4.4.4 11:22:33:44:55:00 -set ip arp GigabitEthernetb/0/0 1.2.3.0 11:22:33:44:55:10 -set ip arp GigabitEthernetb/0/0 1.2.3.1 11:22:33:44:55:12 -set ip arp GigabitEthernetb/0/0 1.2.3.2 11:22:33:44:55:13 -set ip arp GigabitEthernetb/0/0 1.2.3.3 11:22:33:44:55:14 -set ip arp GigabitEthernetb/0/0 1.2.3.4 11:22:33:4e:55:11 -set ip arp GigabitEthernetb/0/0 1.2.3.5 11:22:33:44:55:15 -set ip arp GigabitEthernetb/0/0 1.2.3.6 11:22:33:44:55:16 -set ip arp GigabitEthernetb/0/0 1.2.3.7 11:22:33:44:55:17 -set ip arp GigabitEthernetb/0/0 1.2.3.8 11:22:33:44:55:18 -set ip arp GigabitEthernetb/0/0 1.2.3.9 11:22:33:44:55:19 -set ip arp GigabitEthernetb/0/0 1.2.3.10 11:22:33:44:55:1a -set ip arp GigabitEthernetb/0/0 1.2.3.11 11:22:33:44:55:1b -set ip arp GigabitEthernetb/0/0 1.2.3.12 11:22:33:44:55:1c -set ip arp GigabitEthernetb/0/0 1.2.3.13 11:22:33:44:55:1d -set ip arp GigabitEthernetb/0/0 1.2.3.14 11:22:33:44:55:1e -set ip arp GigabitEthernetb/0/0 1.2.3.15 11:22:33:44:55:1f -set ip arp GigabitEthernetb/0/0 1.2.3.16 11:22:33:44:50:01 -set ip arp GigabitEthernetb/0/0 1.2.3.17 11:22:33:44:51:01 -set ip arp GigabitEthernetb/0/0 1.2.3.18 11:22:33:44:52:01 -set ip arp GigabitEthernetb/0/0 1.2.3.19 11:22:33:44:53:01 -set ip arp GigabitEthernetb/0/0 1.2.3.20 11:22:33:44:54:02 -set ip arp GigabitEthernetb/0/0 1.2.3.21 11:22:33:44:55:01 -set ip arp GigabitEthernetb/0/0 1.2.3.22 11:22:33:44:56:02 -set ip arp GigabitEthernetb/0/0 1.2.3.23 11:22:33:44:57:00 -set ip arp GigabitEthernetb/0/0 1.2.3.24 11:22:33:44:58:02 -set ip arp GigabitEthernetb/0/0 1.2.3.25 11:22:33:44:59:03 -set ip arp GigabitEthernetb/0/0 1.2.3.26 11:22:33:44:5a:01 -set ip arp GigabitEthernetb/0/0 1.2.3.27 11:22:33:44:5b:02 -set ip arp GigabitEthernetb/0/0 1.2.3.28 11:22:33:44:5c:03 -set ip arp GigabitEthernetb/0/0 1.2.3.29 11:22:33:44:5d:04 -set ip arp GigabitEthernetb/0/0 1.2.3.30 11:22:33:44:5e:05 -set ip arp GigabitEthernetb/0/0 1.2.3.31 11:22:33:44:5f:06 - - -Show commands -============= -show vcgn config -show vcgn statistics -show node counters -show interface - -Show commands to show translations -================================== -show vcgn inside-translation protocol tcp inside-addr 1.2.3.4 start-port 5641 end-port 5645 -show vcgn outside-translation protocol tcp outside-addr 10.1.1.31 start-port 7000 end-port 8000 -show vcgn inside-translation protocol icmp inside-addr 1.2.3.4 start-port 7000 end-port 8000 -show vcgn outside-translation protocol icmp outside-addr 10.1.1.31 start-port 7000 end-port 8000 - - |