summaryrefslogtreecommitdiffstats
path: root/plugins/vcgn-plugin/vcgn/README
diff options
context:
space:
mode:
authorDamjan Marion <damarion@cisco.com>2017-01-10 17:07:38 +0100
committerDave Barach <openvpp@barachs.net>2017-01-11 12:57:31 +0000
commit1c5ee872b14c5e9412b8c0e4f169b85d11238d14 (patch)
tree14afec369eeabaef32aabd38c667275effdba341 /plugins/vcgn-plugin/vcgn/README
parente546d3b0f739d35ec2e4702181d99ff4190e8b46 (diff)
Remove vcgn plugin
Change-Id: I79f18ec386dedd91a8dcea2ca5726208b7b3c67c Signed-off-by: Damjan Marion <damarion@cisco.com>
Diffstat (limited to 'plugins/vcgn-plugin/vcgn/README')
-rw-r--r--plugins/vcgn-plugin/vcgn/README100
1 files changed, 0 insertions, 100 deletions
diff --git a/plugins/vcgn-plugin/vcgn/README b/plugins/vcgn-plugin/vcgn/README
deleted file mode 100644
index 9b903967ac4..00000000000
--- a/plugins/vcgn-plugin/vcgn/README
+++ /dev/null
@@ -1,100 +0,0 @@
- =================================
- CARRIER GRADE NAT - NAT44 README
- =================================
-
-What is implemented:
-====================
-* NAT44 UDP, TCP, ICMP protocols
-* Show and config commands for various parameters for the same
-* NF9 logging is implemented but is not tested
-
-What is not implemented:
-=========================
-* TCP MSS
-* TCP refresh direction
-* Static port forwarding
-* Syslog support
-* Destination based logging or session logging
-* None of the ALGs
-* Performance optimization
-* Binary APIs, suitable for configuring the feature from netconf/restconf/yang
-* Support for VLANs
-
-Setup
-=====
-
- +--------------+
-+------------+ GEb/0/0 | |
-| Tester +-------------->+ vCGN/vPE-f |
-| +<--------------+ VM in UCS |
-+------------+ GE13/0/0 | |
- +--------------+
-
-Configure Interfaces and add routes in vPE-f
-=============================================
-set int ip address GigabitEthernetb/0/0 10.4.5.2/24
-set int state GigabitEthernetb/0/0 up
-set int ip address GigabitEthernet13/0/0 20.4.5.2/24
-set int state GigabitEthernet13/0/0 up
-ip route add 4.4.4.0/24 via GigabitEthernet13/0/0
-ip route add 1.2.3.0/24 via GigabitEthernetb/0/0 show ip fib
-
-Configure vCGN NAT44 for UDP/TCP/ICMP
-=======================================
-set vcgn inside GigabitEthernetb/0/0 outside GigabitEthernet13/0/0
-set vcgn port limit 65535 set vcgn dynamic port start 5641
-set vcgn map 10.1.1.0 - 10.1.1.31 set vcgn tcp timeout active 65535 init 65535
-set vcgn udp timeout active 65535 init 65535 set vcgn icmp timeout 65535
-
-Set ARP entries for CGN to Tester
-==================================
-set ip arp GigabitEthernet13/0/0 4.4.4.4 11:22:33:44:55:00
-set ip arp GigabitEthernetb/0/0 1.2.3.0 11:22:33:44:55:10
-set ip arp GigabitEthernetb/0/0 1.2.3.1 11:22:33:44:55:12
-set ip arp GigabitEthernetb/0/0 1.2.3.2 11:22:33:44:55:13
-set ip arp GigabitEthernetb/0/0 1.2.3.3 11:22:33:44:55:14
-set ip arp GigabitEthernetb/0/0 1.2.3.4 11:22:33:4e:55:11
-set ip arp GigabitEthernetb/0/0 1.2.3.5 11:22:33:44:55:15
-set ip arp GigabitEthernetb/0/0 1.2.3.6 11:22:33:44:55:16
-set ip arp GigabitEthernetb/0/0 1.2.3.7 11:22:33:44:55:17
-set ip arp GigabitEthernetb/0/0 1.2.3.8 11:22:33:44:55:18
-set ip arp GigabitEthernetb/0/0 1.2.3.9 11:22:33:44:55:19
-set ip arp GigabitEthernetb/0/0 1.2.3.10 11:22:33:44:55:1a
-set ip arp GigabitEthernetb/0/0 1.2.3.11 11:22:33:44:55:1b
-set ip arp GigabitEthernetb/0/0 1.2.3.12 11:22:33:44:55:1c
-set ip arp GigabitEthernetb/0/0 1.2.3.13 11:22:33:44:55:1d
-set ip arp GigabitEthernetb/0/0 1.2.3.14 11:22:33:44:55:1e
-set ip arp GigabitEthernetb/0/0 1.2.3.15 11:22:33:44:55:1f
-set ip arp GigabitEthernetb/0/0 1.2.3.16 11:22:33:44:50:01
-set ip arp GigabitEthernetb/0/0 1.2.3.17 11:22:33:44:51:01
-set ip arp GigabitEthernetb/0/0 1.2.3.18 11:22:33:44:52:01
-set ip arp GigabitEthernetb/0/0 1.2.3.19 11:22:33:44:53:01
-set ip arp GigabitEthernetb/0/0 1.2.3.20 11:22:33:44:54:02
-set ip arp GigabitEthernetb/0/0 1.2.3.21 11:22:33:44:55:01
-set ip arp GigabitEthernetb/0/0 1.2.3.22 11:22:33:44:56:02
-set ip arp GigabitEthernetb/0/0 1.2.3.23 11:22:33:44:57:00
-set ip arp GigabitEthernetb/0/0 1.2.3.24 11:22:33:44:58:02
-set ip arp GigabitEthernetb/0/0 1.2.3.25 11:22:33:44:59:03
-set ip arp GigabitEthernetb/0/0 1.2.3.26 11:22:33:44:5a:01
-set ip arp GigabitEthernetb/0/0 1.2.3.27 11:22:33:44:5b:02
-set ip arp GigabitEthernetb/0/0 1.2.3.28 11:22:33:44:5c:03
-set ip arp GigabitEthernetb/0/0 1.2.3.29 11:22:33:44:5d:04
-set ip arp GigabitEthernetb/0/0 1.2.3.30 11:22:33:44:5e:05
-set ip arp GigabitEthernetb/0/0 1.2.3.31 11:22:33:44:5f:06
-
-
-Show commands
-=============
-show vcgn config
-show vcgn statistics
-show node counters
-show interface
-
-Show commands to show translations
-==================================
-show vcgn inside-translation protocol tcp inside-addr 1.2.3.4 start-port 5641 end-port 5645
-show vcgn outside-translation protocol tcp outside-addr 10.1.1.31 start-port 7000 end-port 8000
-show vcgn inside-translation protocol icmp inside-addr 1.2.3.4 start-port 7000 end-port 8000
-show vcgn outside-translation protocol icmp outside-addr 10.1.1.31 start-port 7000 end-port 8000
-
-