aboutsummaryrefslogtreecommitdiffstats
path: root/src/plugins/linux-cp/lcp_nl.h
diff options
context:
space:
mode:
authorNeale Ranns <neale@graphiant.com>2021-02-05 09:04:35 +0000
committerOle Tr�an <otroan@employees.org>2022-01-28 10:46:31 +0000
commit616447c392311791e630a604a07a2c7e47dbb7d6 (patch)
tree7ee4bc904a141bcc8171b7f9e034f575b7904f2a /src/plugins/linux-cp/lcp_nl.h
parent1fd912c8ddbc30d1cce153f16a11b5dcf1fa571e (diff)
linux-cp: Linux Control Plane Netlink Listener
Type: feature please see FEATURE.yaml for details. Signed-off-by: Neale Ranns <nranns@cisco.com> Signed-off-by: Matthew Smith <mgsmith@netgate.com> Signed-off-by: Jon Loeliger <jdl@netgate.com> Signed-off-by: Pim van Pelt <pim@ipng.nl> Signed-off-by: Neale Ranns <neale@graphiant.com> Change-Id: I6255fd9953d0b03e6b4fe75b67a6845a7c206f74 Signed-off-by: Pim van Pelt <pim@ipng.nl>
Diffstat (limited to 'src/plugins/linux-cp/lcp_nl.h')
-rw-r--r--src/plugins/linux-cp/lcp_nl.h113
1 files changed, 113 insertions, 0 deletions
diff --git a/src/plugins/linux-cp/lcp_nl.h b/src/plugins/linux-cp/lcp_nl.h
new file mode 100644
index 00000000000..0016da7bbad
--- /dev/null
+++ b/src/plugins/linux-cp/lcp_nl.h
@@ -0,0 +1,113 @@
+/*
+ * Copyright (c) 2019 Cisco and/or its affiliates.
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <vlib/vlib.h>
+
+#include <netlink/route/link.h>
+#include <netlink/route/route.h>
+#include <netlink/route/neighbour.h>
+#include <netlink/route/addr.h>
+
+typedef void (*nl_rt_link_cb_t) (struct rtnl_link *rl, void *ctx);
+typedef void (*nl_rt_addr_cb_t) (struct rtnl_addr *ra);
+typedef void (*nl_rt_neigh_cb_t) (struct rtnl_neigh *rr);
+typedef void (*nl_rt_route_cb_t) (struct rtnl_route *rn);
+
+#define NL_RT_COMMON uword is_mp_safe
+
+typedef struct nl_rt_link_t_
+{
+ NL_RT_COMMON;
+
+ nl_rt_link_cb_t cb;
+} nl_rt_link_t;
+
+typedef struct nl_rt_addr_t_
+{
+ NL_RT_COMMON;
+
+ nl_rt_addr_cb_t cb;
+} nl_rt_addr_t;
+
+typedef struct nl_rt_neigh_t_
+{
+ NL_RT_COMMON;
+
+ nl_rt_neigh_cb_t cb;
+} nl_rt_neigh_t;
+
+typedef struct nl_rt_route_t_
+{
+ NL_RT_COMMON;
+
+ nl_rt_route_cb_t cb;
+} nl_rt_route_t;
+
+#undef NL_RT_COMMON
+
+typedef struct nl_vft_t_
+{
+ nl_rt_link_t nvl_rt_link_add;
+ nl_rt_link_t nvl_rt_link_del;
+ nl_rt_addr_t nvl_rt_addr_add;
+ nl_rt_addr_t nvl_rt_addr_del;
+ nl_rt_neigh_t nvl_rt_neigh_add;
+ nl_rt_neigh_t nvl_rt_neigh_del;
+ nl_rt_route_t nvl_rt_route_add;
+ nl_rt_route_t nvl_rt_route_del;
+} nl_vft_t;
+
+extern void nl_register_vft (const nl_vft_t *nv);
+
+typedef enum lcp_nl_obj_t_
+{
+ LCP_NL_LINK,
+ LCP_NL_ADDR,
+ LCP_NL_NEIGH,
+ LCP_NL_ROUTE,
+} lcp_nl_obj_t;
+
+/* struct type to hold context on the netlink message being processed.
+ *
+ * At creation of a pair, a tap/tun is created and configured to match its
+ * corresponding hardware interface (MAC address, link state, MTU). Netlink
+ * messages are sent announcing the creation and subsequent configuration.
+ * We do not need to (and should not) act on those messages since applying
+ * those same configurations again is unnecessary and can be disruptive. So
+ * a timestamp for a message is stored and can be compared against the time
+ * the interface came under linux-cp management in order to figure out
+ * whether we should apply any configuration.
+ */
+typedef struct nl_msg_info
+{
+ struct nl_msg *msg;
+ f64 ts;
+} nl_msg_info_t;
+
+#define LCP_NL_N_OBJS (LCP_NL_ROUTE + 1)
+
+extern struct nl_cache *lcp_nl_get_cache (lcp_nl_obj_t t);
+extern int lcp_nl_drain_messages (void);
+extern void lcp_nl_set_buffer_size (u32 buf_size);
+extern void lcp_nl_set_batch_size (u32 batch_size);
+extern void lcp_nl_set_batch_delay (u32 batch_delay_ms);
+
+/*
+ * fd.io coding-style-patch-verification: ON
+ *
+ * Local Variables:
+ * eval: (c-set-style "gnu")
+ * End:
+ */
1'>111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130
# Copyright (c) 2017 Cisco and/or its affiliates.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at:
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

*** Settings ***
| Resource | resources/libraries/robot/performance/performance_setup.robot
| ...
| Force Tags | 3_NODE_SINGLE_LINK_TOPO | PERFTEST | HW_ENV | NDRPDRDISC
| ... | NIC_Intel-X520-DA2 | ETH | IP4FWD | FEATURE | ACL | ACL_STATEFUL
| ... | OACL | ACL1 | 100k_FLOWS
| ...
| Suite Setup | Run Keywords
| ... | Set up 3-node performance topology with DUT's NIC model | L3
| ... | Intel-X520-DA2
| ... | AND | Set up performance test suite with ACL
| Suite Teardown | Tear down 3-node performance topology
| ...
| Test Setup | Set up performance test
| ...
| Test Teardown | Tear down performance test with ACL
| ... | ${min_rate}pps | ${framesize} | ${traffic_profile}
| ...
| Test Template | Local template
| ...
| Documentation | *RFC2544: Packet throughput IPv4 test cases with ACL*
| ...
| ... | *[Top] Network Topologies:* TG-DUT1-DUT2-TG 3-node circular topology\
| ... | with single links between nodes.
| ... | *[Enc] Packet Encapsulations:* Eth-IPv4-UDP for L2 switching of IPv4.
| ... | *[Cfg] DUT configuration:* DUT1 is configured with L2 bridge domain\
| ... | and MAC learning enabled. DUT2 is configured with L2 cross-connects.\
| ... | Required ACL rules are applied to input paths of both DUT1 intefaces.\
| ... | DUT1 and DUT2 are tested with 2p10GE NIC X520 Niantic by Intel.\
| ... | *[Ver] TG verification:* TG finds and reports throughput NDR (Non Drop\
| ... | Rate) with zero packet loss tolerance or throughput PDR (Partial Drop\
| ... | Rate) with non-zero packet loss tolerance (LT) expressed in percentage\
| ... | of packets transmitted. NDR and PDR are discovered for different\
| ... | Ethernet L2 frame sizes using either binary search or linear search\
| ... | algorithms with configured starting rate and final step that determines\
| ... | throughput measurement resolution. Test packets are generated by TG on\
| ... | links to DUTs. TG traffic profile contains two L3 flow-groups\
| ... | (flow-group per direction, ${flows_per_dir} flows per flow-group) with\
| ... | all packets containing Ethernet header, IPv4 header with UDP header and\
| ... | static payload. MAC addresses are matching MAC addresses of the TG node\
| ... | interfaces.
| ... | *[Ref] Applicable standard specifications:* RFC2544.

*** Variables ***
# X520-DA2 bandwidth limit
| ${s_limit}= | ${10000000000}

# ACL test setup
| ${acl_action}= | permit+reflect
| ${acl_apply_type}= | output
| ${no_hit_aces_number}= | 1
| ${flows_per_dir}= | 100k

# starting points for non-hitting ACLs
| ${src_ip_start}= | 30.30.30.1
| ${dst_ip_start}= | 40.40.40.1
| ${ip_step}= | ${1}
| ${sport_start}= | ${1000}
| ${dport_start}= | ${1000}
| ${port_step}= | ${1}
| ${trex_stream1_subnet}= | 10.10.10.0/24
| ${trex_stream2_subnet}= | 20.20.20.0/24

*** Keywords ***
| Local template
| | [Arguments] | ${phy_cores} | ${framesize} | ${search_type}
| | ... | ${rxq}=${None} | ${min_rate}=${50000}
| | ...
| | Set Test Variable | ${framesize}
| | Set Test Variable | ${min_rate}
| | ${max_rate}= | Calculate pps | ${s_limit} | ${framesize}
| | ${binary_min}= | Set Variable | ${min_rate}
| | ${binary_max}= | Set Variable | ${max_rate}
| | ${threshold}= | Set Variable | ${min_rate}
| | Given Add worker threads and rxqueues to all DUTs | ${phy_cores} | ${rxq}
| | And Add PCI devices to all DUTs
| | ${get_framesize}= | Get Frame Size | ${framesize}
| | And Run Keyword If | ${get_framesize} < ${1522} | Add no multi seg to all DUTs
| | And Apply startup configuration on all VPP DUTs
| | ${ip_nr}= | Set Variable | 100
| | When Initialize IPv4 routing for '${ip_nr}' addresses with IPv4 ACLs on DUT1 in 3-node circular topology
| | ${traffic_profile}= | Set Variable | trex-sl-3n-ethip4udp-100u1000p-conc
| | Set Test Variable | ${traffic_profile}
| | Then Run Keyword If | '${search_type}' == 'NDR'
| | ... | Find NDR using binary search and pps
| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
| | ... | ${min_rate} | ${max_rate} | ${threshold}
| | ... | ELSE IF | '${search_type}' == 'PDR'
| | ... | Find PDR using binary search and pps
| | ... | ${framesize} | ${binary_min} | ${binary_max} | ${traffic_profile}
| | ... | ${min_rate} | ${max_rate} | ${threshold}
| | ... | ${perf_pdr_loss_acceptance} | ${perf_pdr_loss_acceptance_type}

*** Test Cases ***
| tc01-64B-1t1c-ethip4udp-ip4base-oacl1-stateful-flows100k-ndrdisc
| | [Tags] | 64B | 1C | NDRDISC
| | phy_cores=${1} | framesize=${64}  | search_type=NDR

| tc02-64B-1t1c-ethip4udp-ip4base-oacl1-stateful-flows100k-pdrdisc
| | [Tags] | 64B | 1C | PDRDISC | SKIP_PATCH
| | phy_cores=${1} | framesize=${64}  | search_type=PDR

| tc03-64B-2t2c-ethip4udp-ip4base-oacl1-stateful-flows100k-ndrdisc
| | [Tags] | 64B | 2C | NDRDISC
| | phy_cores=${2} | framesize=${64}  | search_type=NDR

| tc04-64B-2t2c-ethip4udp-ip4base-oacl1-stateful-flows100k-pdrdisc
| | [Tags] | 64B | 2C | PDRDISC | SKIP_PATCH
| | phy_cores=${2} | framesize=${64}  | search_type=PDR

| tc05-64B-4t4c-ethip4udp-ip4base-oacl1-stateful-flows100k-ndrdisc
| | [Tags] | 64B | 4C | NDRDISC
| | phy_cores=${4} | framesize=${64}  | search_type=NDR

| tc06-64B-4t4c-ethip4udp-ip4base-oacl1-stateful-flows100k-pdrdisc
| | [Tags] | 64B | 4C | PDRDISC | SKIP_PATCH
| | phy_cores=${4} | framesize=${64}  | search_type=PDR