misc: deprecate netmap and ixge drivers

Both are out of sync for long time...

Type: refactor

Change-Id: I7de3170d35330fc172501d87655dfef91998b8fe
Signed-off-by: Damjan Marion <damarion@cisco.com>

1 files changed, 0 insertions, 236 deletions

diff --git a/src/vnet/devices/netmap/cli.c b/src/vnet/devices/netmap/cli.c
deleted file mode 100644
index 713632947a1..00000000000
--- a/src/vnet/devices/netmap/cli.c
+++ /dev/null
@@ -1,236 +0,0 @@
-/*
- *------------------------------------------------------------------
- * Copyright (c) 2016 Cisco and/or its affiliates.
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at:
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- *------------------------------------------------------------------
- */
-#include <stdint.h>
-#include <net/if.h>
-#include <sys/ioctl.h>
-
-#include <vlib/vlib.h>
-#include <vlib/unix/unix.h>
-#include <vnet/ethernet/ethernet.h>
-
-#include <vnet/devices/netmap/net_netmap.h>
-#include <vnet/devices/netmap/netmap.h>
-
-static clib_error_t *
-netmap_create_command_fn (vlib_main_t * vm, unformat_input_t * input,
-			  vlib_cli_command_t * cmd)
-{
-  unformat_input_t _line_input, *line_input = &_line_input;
-  u8 *host_if_name = NULL;
-  u8 hwaddr[6];
-  u8 *hw_addr_ptr = 0;
-  int r;
-  u8 is_pipe = 0;
-  u8 is_master = 0;
-  u32 sw_if_index = ~0;
-  clib_error_t *error = NULL;
-
-  /* Get a line of input. */
-  if (!unformat_user (input, unformat_line_input, line_input))
-    return 0;
-
-  while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
-    {
-      if (unformat (line_input, "name %s", &host_if_name))
-	;
-      else
-	if (unformat
-	    (line_input, "hw-addr %U", unformat_ethernet_address, hwaddr))
-	hw_addr_ptr = hwaddr;
-      else if (unformat (line_input, "pipe"))
-	is_pipe = 1;
-      else if (unformat (line_input, "master"))
-	is_master = 1;
-      else if (unformat (line_input, "slave"))
-	is_master = 0;
-      else
-	{
-	  error = clib_error_return (0, "unknown input `%U'",
-				     format_unformat_error, line_input);
-	  goto done;
-	}
-    }
-
-  if (host_if_name == NULL)
-    {
-      error = clib_error_return (0, "missing host interface name");
-      goto done;
-    }
-
-  r =
-    netmap_create_if (vm, host_if_name, hw_addr_ptr, is_pipe, is_master,
-		      &sw_if_index);
-
-  if (r == VNET_API_ERROR_SYSCALL_ERROR_1)
-    {
-      error = clib_error_return (0, "%s (errno %d)", strerror (errno), errno);
-      goto done;
-    }
-
-  if (r == VNET_API_ERROR_INVALID_INTERFACE)
-    {
-      error = clib_error_return (0, "Invalid interface name");
-      goto done;
-    }
-
-  if (r == VNET_API_ERROR_SUBIF_ALREADY_EXISTS)
-    {
-      error = clib_error_return (0, "Interface already exists");
-      goto done;
-    }
-
-  vlib_cli_output (vm, "%U\n", format_vnet_sw_if_index_name, vnet_get_main (),
-		   sw_if_index);
-
-done:
-  unformat_free (line_input);
-
-  return error;
-}
-
-/*?
- * '<em>netmap</em>' is a framework for very fast packet I/O from userspace.
- * '<em>VALE</em>' is an equally fast in-kernel software switch using the
- * netmap API. '<em>netmap</em>' includes '<em>netmap pipes</em>', a shared
- * memory packet transport channel. Together, they provide a high speed
- * user-space interface that allows VPP to patch into a linux namespace, a
- * linux container, or a physical NIC without the use of DPDK. Netmap/VALE
- * generates the '<em>netmap.ko</em>' kernel module that needs to be loaded
- * before netmap interfaces can be created.
- * - https://github.com/luigirizzo/netmap - Netmap/VALE repo.
- * - https://github.com/vpp-dev/netmap - VPP development package for Netmap/VALE,
- * which is a snapshot of the Netmap/VALE repo with minor changes to work
- * with containers and modified kernel drivers to work with NICs.
- *
- * Create a netmap interface that will attach to a linux interface.
- * The interface must already exist. Once created, a new netmap interface
- * will exist in VPP with the name '<em>netmap-<ifname></em>', where
- * '<em><ifname></em>' takes one of two forms:
- * - <b>ifname</b> - Linux interface to bind too.
- * - <b>valeXXX:YYY</b> -
- *   - Where '<em>valeXXX</em>' is an arbitrary name for a VALE
- *     interface that must start with '<em>vale</em>' and is less
- *     than 16 characters.
- *   - Where '<em>YYY</em>' is an existing linux namespace.
- *
- * This command has the following optional parameters:
- *
- * - <b>hw-addr <mac-addr></b> - Optional ethernet address, can be in either
- * X:X:X:X:X:X unix or X.X.X cisco format.
- *
- * - <b>pipe</b> - Optional flag to indicate that a '<em>netmap pipe</em>'
- * instance should be created.
- *
- * - <b>master | slave</b> - Optional flag to indicate whether VPP should
- * be the master or slave of the '<em>netmap pipe</em>'. Only considered
- * if '<em>pipe</em>' is entered. Defaults to '<em>slave</em>' if not entered.
- *
- * @cliexpar
- * Example of how to create a netmap interface tied to the linux
- * namespace '<em>vpp1</em>':
- * @cliexstart{create netmap name vale00:vpp1 hw-addr 02:FE:3F:34:15:9B pipe master}
- * netmap-vale00:vpp1
- * @cliexend
- * Once the netmap interface is created, enable the interface using:
- * @cliexcmd{set interface state netmap-vale00:vpp1 up}
-?*/
-/* *INDENT-OFF* */
-VLIB_CLI_COMMAND (netmap_create_command, static) = {
-  .path = "create netmap",
-  .short_help = "create netmap name <ifname>|valeXXX:YYY "
-    "[hw-addr <mac-addr>] [pipe] [master|slave]",
-  .function = netmap_create_command_fn,
-};
-/* *INDENT-ON* */
-
-static clib_error_t *
-netmap_delete_command_fn (vlib_main_t * vm, unformat_input_t * input,
-			  vlib_cli_command_t * cmd)
-{
-  unformat_input_t _line_input, *line_input = &_line_input;
-  u8 *host_if_name = NULL;
-  clib_error_t *error = NULL;
-
-  /* Get a line of input. */
-  if (!unformat_user (input, unformat_line_input, line_input))
-    return 0;
-
-  while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
-    {
-      if (unformat (line_input, "name %s", &host_if_name))
-	;
-      else
-	{
-	  error = clib_error_return (0, "unknown input `%U'",
-				     format_unformat_error, line_input);
-	  goto done;
-	}
-    }
-
-  if (host_if_name == NULL)
-    {
-      error = clib_error_return (0, "missing host interface name");
-      goto done;
-    }
-
-  netmap_delete_if (vm, host_if_name);
-
-done:
-  unformat_free (line_input);
-
-  return error;
-}
-
-/*?
- * Delete a netmap interface. Use the '<em><ifname></em>' to identify
- * the netmap interface to be deleted. In VPP, netmap interfaces are
- * named as '<em>netmap-<ifname></em>', where '<em><ifname></em>'
- * takes one of two forms:
- * - <b>ifname</b> - Linux interface to bind too.
- * - <b>valeXXX:YYY</b> -
- *   - Where '<em>valeXXX</em>' is an arbitrary name for a VALE
- *     interface that must start with '<em>vale</em>' and is less
- *     than 16 characters.
- *   - Where '<em>YYY</em>' is an existing linux namespace.
- *
- * @cliexpar
- * Example of how to delete a netmap interface named '<em>netmap-vale00:vpp1</em>':
- * @cliexcmd{delete netmap name vale00:vpp1}
-?*/
-/* *INDENT-OFF* */
-VLIB_CLI_COMMAND (netmap_delete_command, static) = {
-  .path = "delete netmap",
-  .short_help = "delete netmap name <ifname>|valeXXX:YYY",
-  .function = netmap_delete_command_fn,
-};
-/* *INDENT-ON* */
-
-clib_error_t *
-netmap_cli_init (vlib_main_t * vm)
-{
-  return 0;
-}
-
-VLIB_INIT_FUNCTION (netmap_cli_init);
-
-/*
- * fd.io coding-style-patch-verification: ON
- *
- * Local Variables:
- * eval: (c-set-style "gnu")
- * End:
- */